BT BT STUDIO 1100 инструкция обслуживания

U s er G u ide B T S TUDIO 1100[...]

Section Use Caller Display to see who is calling before you pick up the phone and keep track of incoming calls with the 30 number Calls list. Use the phonebook to store and dial up to 30 of most frequently used phone numbers. As a Digitally Enhanced Cordless T elephony (DECT) product, your B T Studio 1100 provides digital quality call clarity. W el[...]

Section This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. F ollow the simple instructions in ‘Getting Started ’ , on the next few pages. Need help? If you have any problems setting up or using your B T Studio 1100 please contact the[...]

Getting started Location . . . . . . . . . . . . . . . . . . . . . . . 6 Setting up the base and handset . . . . . 6 Getting to know your phone Handset buttons . . . . . . . . . . . . . . . . . 10 Sample screen . . . . . . . . . . . . . . . . . . . 11 Base buttons and LEDs ............ 12 Navigating the menus . . . . . . . . . . . . . 13 Menu map .[...]

5 In this guide Quick key lock . . . . . . . . . . . . . . . . . . 31 T o switch key lock off . . . . . . . . . . . . . 31 Naming a handset . . . . . . . . . . . . . . . . 32 Base settings T o change the base PIN code . . . . . . . 33 De-register a handset from the base . . 34 T o change the ringer melody . . . . . . . . 34 T o change the ringer vo[...]

If you have purchased a BT Studio 1100 multiple pack please follow instructions and Location Y ou need to place your B T Studio 1100 close enough to a mains power and telephone socket so that the cables will reach. The strength of the handset signal depends on where you site the base. Make sure it is at least 1 metre away from other electrical appl[...]

7 G etting started T alk/Standby time In ideal conditions, the handset batteries should give about 10 hours talk time or 100 hours standby on a single charge. The base must remain plugged in to the mains and switched on at all times. Note that new batteries do not reach full capacity until they have been in normal use for several days. Battery symb[...]

BT Studio 1100 T win handset Y our BT Studio 1100 handsets are the same, so instructions throughout this guide apply to both. Handset numbers Once registered with the base, each handset will display its handset number, and respectively. Battery performance T o keep your batteries in the best condition, leave the handset off the base for a few hours[...]

Setting up the charger 1. Plug the power adaptor cable into the underside of the charger. 2. Plug the power adaptor into the mains wall socket and switch the power on. 3. Install the 2 x AAA rechargeable batteries supplied into the handset. 4. Place the handset in the charger and charge the handset for at least 24 hours. The red Charging light on t[...]

Getting to know your phone 1 2 3 4 5 6 7 8 9 0 R Int Clr Redial D i g i t a l C l a r i t y P C a l l s G H I P Q R S A B C J K L T U V D E F M N O W X Y Z Vo l M en u S e c r e c y Redial/P Opens the redial list, page 16 . Enters a P ause when storing numbers, page 18 & 53 . Clr./Secrecy Delete characters, page 18 . Delete calls list entries, [...]

11 STUDIO 1 § EXT INT © Getting to know your phone Sample screen – These are where the handset icons will appear. * For these features to work you must subscribe to your Network Provider’s Caller Display* and/or Call Waiting* service. Indicates a call is in progress, page 14. Flashes when you receive an external call. Stays on during the conv[...]

12 Getting to know your phone Base buttons and LEDs C h a r g i n g P o w e r / I n U s e P a g e B T S t u d i o 1 1 0 0 Page Press to page handset(s), page 38 . Also used when registering handsets, page 37 . P ower/In use indicator On = Power on Flashes = During a call When the phone rings When registering handsets Charging indicator On = Handset[...]

Menu map Navigating the menus Y our Studio 1100 handset has a menu system to guide you through the handset and base options. Refer to the menu map below for the available options. When the handset is displaying the idle screen: 1. Press to open the main menu. 2. Use and to scroll through the menu list. 3. When the menu item you want is displayed, p[...]

Switching the handset power on/off Press and hold the button. Make an external call 1. Press listen for the dial tone then dial the number. The display shows the and then the icons. Preparatory dialling 1. Enter the number first. If you make a mistake, press to delete the last digit. 2. Press to dial. End a call 1. Press or place the handset back o[...]

15 If you have subscribed to your network’s Caller Display service, the caller’s number, or name (if an exact name/number match is found in the phonebook) will also be displayed, See page 22 for more information. Call timer Y our handset automatically times the duration of all calls, showing the time on the display during your call and for a fe[...]

16 Handset ringer volume There are 3 volume levels to select from, or you can set the volume to off. While the phone is ringing: 1. Press to increase or to decrease the ringer volume. The display shows the set volume. Secrecy During a call, you can talk to someone nearby without your caller hearing you. 1. During your call, press . MUTE is displaye[...]

Press to exit a menu. Keep pressing to return to the idle display at any time. If a name/number match is found in the phonebook the name will be displayed instead of the number. Press to toggle between the name and number. 3. Press to dial the number. Last number redial 1. Lift the handset and press . 2. Press . The last number called is redialled.[...]

Store a phonebook entry Y ou can use the phonebook to store up to 30 names and numbers for easy dialling. Each number can be up to 20 digits and each name up to 12 characters long. 1. Press to display PHONEBOOK . 2. Press to confirm. 3. Display shows ADD ENTRY . Press to display NAME? . 4. Enter a name using the keypad (see character map, page 19) [...]

19 Character map Digit button BLANK - 1 ABC 2 DE F 3 G H I 4 JK L 5 MN O 6 PQ R S 7 TU V 8 WX Y Z 9 9 W X Y Z 8 T U V 7 P Q R S 6 M N O 5 J K L 4 G H I 3 D E F 2 A B C 1 Phonebook[...]

20 Dial a phonebook entry 1. Press . 2. Enter the first letter of the name you want using the keypad, then scroll to the exact entry using or . 3. Press to dial the number. Delete a phonebook entry 1. Press . Display shows PHONE BOOK . 2. Press to confirm. 3. Press or to select DELETE ENTRY . 4. Press to confirm. 5. Press or to select entry. 6. Pre[...]

T o delete digits Press . T o change individual characters Use or to move the cursor underneath the letter you want to change, then overtype the correct letter. Vo l Clr S e c r e c y Edit a phonebook entry 1. Press . Display shows PHONE BOOK . 2. Press . 3. Press or to select MODIFY ENTRY . Press to confirm. 4. Scroll to the entry you want using o[...]

If you subscribe to a Caller Display service you can see your caller’s number on your handset’s display (unless it has been withheld) before you answer the call. If you have stored the caller’s name and number in the phonebook then they will be shown alternately in the display. Whether you answer a call or not, the caller’s phone number is [...]

23 Using the calls list with additional handsets If you are using more than one handset, each handset has a separate calls list. A call answered on one handset will show as unanswered on another. What type of call? The icon indicates a new call waiting to be viewed. The icon will be displayed for calls that you answered. The icon will be displayed [...]

24 Delete all calls list entries 1. Press or to open the calls list. 2. Press and hold until DELETE ALL? is displayed. 3. Press to confirm (or to cancel). Copy a calls list entry to the phonebook 1. Press or repeatedly to open the calls list and scroll to the entry you want to copy. 2. Press twice . ADD? is displayed. 3. Press . NAME? is displayed.[...]

The second caller is only charged from the second you answer, not while they are waiting to be connected. Call W aiting Providing you have subscribed to your network provider’s Call Waiting service, you will hear a soft beep every 5 seconds if an incoming call arrives while you are already on the phone. This beep is not audible to the person you [...]

Section The default setting is 1. Y ou can also assign a different ringer melody to entries in your phonebook, see page 18. Y ou can choose a range of settings to suit your personal preferences. Handset ringer melody and volume Y ou have a choice of 3 melodies and 3 volume levels (or OFF). Y ou can change the external ringer (ring for an external i[...]

27 Handset settings The default setting is 1. T o change the external ringer volume 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until EXT RING VOL is displayed then press . The current setting is played. 5. Press or to select a volume then press . A confirmation beep is played. T o change the internal ringer melody 1. [...]

28 Handset settings T o change the internal ringer volume 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until INT RING VOL is displayed then press . The current setting is played. 5. Press or to select a volume then press . A confirmation beep is played. K ey beeps Y our B T Studio handset emits beeps to alert you to cer[...]

Handset settings The default setting is ON. Switch beeps on/off 1. Press . 2. Press or until HANDSET is displayed. 3. Press . Display shows BEEP . Press to confirm. 4. Press or to display the type of beeps you want, then press . KEYTONE – for handset button beeps LOW BATTERY – for low battery warning beeps OUT RANGE – for out of range warning[...]

30 4. Press or until AUTO ANSWER is displayed then press to confirm. 5. Press or to select ON or OFF then press to confirm. The handset gives a confirmation tone. Selecting a language 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until LANGUAGE is displayed. Press to confirm. 5. Press or until the language you require is[...]

Key lock Y ou can lock the keypad so that it cannot be used accidentally while carrying the handset around. T o switch key lock on: 1. Press . 2. Press or until HANDSET is displayed. 3. Press to confirm. 4. Press or until KEY LOCK? is displayed then press to confirm. The handset gives a confirmation tone. The icon is displayed on the idle screen wh[...]

32 Naming a handset Each handset registered to the base is assigned a number. Y ou can give a handset a name as well as a number to match the user or location e.g. ANNE or OFFICE . The name can be up to 10 characters long. 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until NAME is displayed then press . 5. Use to delete[...]

The default setting is 0000. Y ou can choose a range of settings to suit your personal preferences. Security PIN Y our Studio 1100 has a security PIN code which you will need to change some of the base settings. The default setting is 0000. Y ou may want to change this to prevent unauthorised changes to your settings. T o change the base PIN code 1[...]

34 Base settings De-register a handset from the base 1. Press . 2. Press or until SETUP is displayed then press to select. 3. Press or until DEL HANDSET is displayed then press to select. 4. Enter your 4 digit PIN then press HANDSET? is displayed. 5. Enter the handset you want to de-register then press . 6. Press twice to return to the idle screen.[...]

Base settings The default setting is 3. WARNING If you reset the handset and base, you will lose any names or numbers stored in the phonebook, redial list and calls list. 3. Press or until BASE MELODY is displayed then press . The current melody is played. 4. Press or to select a melody then press to select. 5. Press twice to return to the idle scr[...]

36 Base settings 3. Press or until DEFAULT is displayed then press to select. PIN? is displayed. 4. Enter your 4 digit PIN then press . Display will show CONFIRM? Press to sele ct. Y our BT Studio 1100 will reset itself to the default settings. R eset if you have forgotten your PIN code 1. Press and hold to switch the handset off and remove the han[...]

IMPOR TANT Y ou must choose a handset that is GAP compatible to use with your B T Studio 1100. If you purchase a new handset to use with your B T Studio 1100 it will have to be registered to the base. Y ou will need to do this before you can use it. If you have purchased a B T Studio 1100 multiple pack each additional handset will come pre-register[...]

38 Using additional handsets Internal calls Y ou can make internal calls between 2 B T Studio 1100 handsets. 1. Press . 2. Enter the other handset number using the keypad ( , or . The called handset will ring and show the calling handset’s number. If there is no response, press to end the call at your handset. R eceiving internal calls 1. When th[...]

Using additional handsets T ransferring calls Y ou can transfer an external call to another hands et. During an external call: 1. Press an d the number of the other handset. Y our calle r is p ut on hold. The other handset will ring. 2. When the handset answers, press to transfer the call. If the other handset does not answer, press to talk to the [...]

IMPOR TANT Y ou can only register your BT Studio 1100 handset to another base if it is GAP compatible. Y ou will not be able to register your B T Studio 1100 handset to a B T Studio or B T Studio 500 base as these products are not GAP compatible. Y our B T Studio 1100 handset can be registered to up to 4 other bases. Registering your BT Studio 1100[...]

41 Using additional bases When the base is located, you will hear a confirmation tone and PIN? will be displayed. 7. Enter the base PIN code and press . Y ou hear a tone to confirm you have entered the correct code and the handset returns to idle mode. Once registered you will hear a confirmation tone and the next available handset number is alloca[...]

42 Using additional bases If AUTO is selected the handset will automatically link to another base with a strong signal, if the signal it is currently receiving from its present base becomes very poor. Or Press or to select AUTO . When the handset locates the selected base you will hear a confirmation tone. V o l[...]

Problems Possible cause No display The batteries may be flat or dead. Recharge or replace the batteries, see page 7. No dial tone Is the telephone line cord plugged into the telephone wall socket? Check that the base station is connected to the mains power and switched on. Y ou cannot link up Is the icon flashing in the display? with the base stati[...]

44 Problems Possible cause No ring on the handset Check that the base station is plugged into the phone socket and that the mains power is switched on. The ringer volume may be set too low for you. See page 16 to adjust the volume. Buzzing noise on my Sometimes your B T Studio 1100 can interfere with other radio, TV , computer electrical equipment [...]

Help BT Accessories and Replacement Items For a full range of accessories and replacement items for B T products please call 0870 240 5522, or visit: B T Studio Helpline 0870 605 8047 Call the dedicated B T Studio Helpline: if you are having difficulties using your B T Studio 1100 if you need replacement batteries or mains power lead Lines open 8am[...]

Safety General Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone. The item code for the base mains power supply is 872260 (black) or 016113 (white). If you have purchased a B T Studio 1100 multiple pack, the item code for the charger mains power supply[...]

47 General information It is recommended that if you have a pacemaker fitted you check with a medical expert before using this product. Y our product may interfere with other electrical equipment, e.g. TV and radio sets, clock/alarms and computers if placed too close. It is recommended that you place your product at least one metre away from such a[...]

48 Environmental Do not expose to direct sunlight. The product may heat up when the batteries are being recharged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage. Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the fre[...]

Product disposal instructions The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life. The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to rec[...]

50 Guarantee Y our B T Studio 1100 digital cordless telephone is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below, the guarantee will provide for the repair of, or at B T’s or its agent’s discretion the option to replace the B T Studio 1100, or any component thereof, (other than batteries), which[...]

Within the 12 month guarantee period: If you experience difficulty using the product, prior to returning it, please read the ‘Help’ section beginning on page 43, or contact the B T Studio 1100 Helpline on 0870 605 8047 , 8am–8pm, Monday to Saturday and 10am–3pm, Sunday. In the unlikely event of a defect occurring, please follow the Helpline[...]

52 T echnical information How many telephones can you have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any other telephone line. Y our B T Studio 1100 has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephone ma[...]

Declaration of Conformance Hereby, Suncorp T echnologies, declares that this B T Studio 1100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of Conformance for the B T Studio 1100 is published on the website: http://www.suncorptech.com/bt Switchboard compatibility This product i[...]

54 T o insert a pause 1. Begin storing a number and press P where a pause is needed. P is shown in the display. Recall The R button is used when connected to certain switchboards, e.g. to transfer calls, and for some B T Calling Features or those services available via your network provider. Dialling mode Y our B T Studio 1100 is set to tone dialli[...]

T emporary change to dialling mode If you have set your B T Studio 1100 to Pulse dialling, you can temporarily switch to T one dialling during a call. 1. Press , then press , then dial the number as normal. Y our B T Studio 1100 will switch to T one dialling only for the duration of this call. Alternatively, you can store a phonebook number so that[...]

Offices worldwide The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British T elecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British T e[...]