Bushnell 119676C инструкция обслуживания

Model#s: 11967 6C / 11967 7C / 1 19 6 78C INSTRUCTION MANUAL 05-14 VIDEO[...]

[...]

3 IMPORT ANT NOTE Congratulations on your purchase of one of the best trail cameras on the market! Bushnell is very proud of this little unit and we are sure you will be pleased with it as well. W e appreciate your business and want to earn your trust. Please refer to the notes below and the instructions in this manual to ensure that you are comple[...]

4 INTRODUCTION About the T rophy Cam HD The Bushnell T rophy Cam HD is a digit al scouting camera. It can be triggered by any movement of game in a location, detected by a highly sensitive Passive Infra-Red (PI R) motion sensor, and then take high quality pictures (up to 8M P still photos), or video clips. The T rophy Cam H D consumes very little p[...]

5 Especially useful for those who setup multiple T rophy Cam H Ds to monitor large or widely separated areas. • Multi Flash Mode (LE D Control)- prevents overexposed flash photos in close range applications • Hybrid Capture Mode-allows both still photos and videos to be captured at each trigger , up to highest resolution settings for each. •[...]

6 INSID E VIE W T ripod Socket DC in Cover Plug V ideo Mic Fig. 1: Connections US B Port SD Card Slot DC In V ideo Mic LE D I R Flash Motion/ Low Battery Indicator Lens Lock Hole PI R Sensor FRONT VI EW Latch Light Sensor AR D Fig. 2 : Button and Switch Guide ON S ETU P OFF L C D Screen Power/Mode Switch U P/V ideo DOWN / Photo LE FT MENU OK R IG H[...]

7 INST ALLING THE BA TTERIES AND SD CARD Before you begin learning how to use your T rophy Cam H D , you will first need to install a set of batteries and insert an S D card. Although that may only take you a minute, there are some import ant notes about both batteries and SD cards you should be aware of, so please t ake the time to read the follo[...]

8 Inser ting the SD Card The T rophy Cam H D has 32M B of internal memory, whic h can hold only about 20 photos (@ 5M P resolution). This is handy for testing and getting familiar with the camera, but you will no doubt want to leave the camera unattended for longer than a day , so using an SD card is recommended for all models. Insert the SD card ([...]

9 USING THE T rophy Cam HD Once you’ve prepared your T rophy Cam H D by properly installing batteries and an SD card, you could simply t ake it outside, strap it to a tree, switch it on and leave-and you might get some great photos that are exactly what you wanted. However , we highly recommend that you first spend some additional time indoors w[...]

10 when it is triggered by the PI R sensor’s detection of activity in the area it covers. Y ou can either move the power switch directly from OFF to O N mode, or stop at the SETU P position first to change one or more settings, then move the switch to ON after you have finished doing so. SETUP MODE In the S ETU P mode you can check and c hange [...]

11 Fig. 3 : SETU P Information Screen 4 4 Still Photo Mode Time Stamp Field Scan On # of Photos T aken Remaining Photo Capacity Date:Month-Day- Y ear Battery Level Image Size (Resolution) SD Card Status Time Hour:Minute:Second Camera (Still Photo) Mode Video Mode Video Sound On Video Resolution Available Video Recording Time Video Mode[...]

12 USING THE SETUP MENU TO CHANGE SETTINGS The main purpose of the SETU P mode is to allow you to change the settings of the camera’s parameters (19 different ones are available!) so your T rophy Cam H D operates exactly the way you want it to. Y ou will do this by entering the S ETU P Menu and pressing the keys below the L C D display, whic h wi[...]

13 Fig. 4 : Selecting Parameter Settings (4a) (4b) Press ME N U Press DOWN Press OK[...]

14 EXAMPLES-Changing the Settings of Some Common Parameters Following this page, you will find tables listing all of the parameters found in the S ETU P Menu, along with their possible settings (or range of settings), and a detailed description of what the parameter controls and what the settings do. If you read the previous section detailing how [...]

15 Field Scan 2x with Live T rigger Feature Field Scan is a revolutionary new feature for the Bushnell T rophy Cam H D , which allows you to monitor your food plots or field edges with time lapse images or video. W hen set to “On” , the T rophy Cam H D will take a photo (or record a video clip) automatically at your choice of intervals (for ex[...]

16 5. After you finish setting the Stop minutes, press OK to confirm your settings for the first block of Field Scan recording. If desired, you can create a second block of time by pressing the DOW N key to select "B" (Step 4) , then press OK and follow the same process to set St art and Stop times for Field Scan block "B" (S[...]

17 7:00 PM. No Field Scan recording would occur from 8AM to 5:3 0PM, or from 7PM to 6AM. Remember, Field Scan recording is independent of normal triggers due to animal activity–even if no animals enter the I R sensor coverage zone, an image or video will still be captured every 15 minutes during the block(s) of time. If an animal triggers the cam[...]

18 Parameter Settings ( Bold =default) Description Mode Camera , V ideo, Hybrid Selects whether still photos or video clips are captured when the camera is triggered. Hybrid mode combines both Camera and V ideo, so a still photo and a video clip are both captured for each trigger . Image Size (only aects still photos in Camera or Hybrid modes) 3[...]

19 Parameter Settings ( Bold =default) Description LE D Control (Multi-Flash feature) Low , Medium, High Controls how many LE D lamps fire when images are taken in low light. “High”=all 33 LE Ds fire, which is the default setting. Set to Medium or Low if you are getting overexposed flash photos or will place the camera at very close range to[...]

20 Parameter Settings ( Bold =default) Description Video Length (only aects video clips in Video or Hybrid modes) 10S (second) default, with 60S to 5S possible range Sets length per captured video clip. Settings begin with 10 second default when parameter is first selected. After stepping down to 5S, video length settings start over at 60S. Int[...]

21 Parameter Settings ( Bold =default) Description Sensor Level Low , Normal, High, Auto Selects the sensitivity of the PI R sensor . The “High” setting will make the camera more sensitive to infrared (heat) and more easily triggered by motion, and the “Low” setting makes it less sensitive to heat and motion. The High setting can be useful [...]

22 Parameter Settings ( Bold =default) Description Format Execute (followed by an additional No /Y es step) Deletes (erases) all files stored on a card to prepare it for reuse. Always format a card that has been previously used in other devices. Caution! Make sure you have downloaded and backed up any files you want to preserve first! Press OK t[...]

23 Parameter Settings ( Bold =default) Description Field Scan On, Off (After On is selected): “A” Start/Stop, “B” Start/Stop, Interval T urns Field Scan (Time Lapse) recording mode on/off. W hen activated, Field Scan forces the camera to take photos or videos even when it is not triggered by a nearby live animal, useful for constant monitor[...]

24 Parameter Settings ( Bold =default) Description Video Sound (only affects video clips in Video or Hybrid modes ) On , Off Select “On” to record audio along with the video when the camera is set to video mode (saved file sizes will be slightly larger). Default Set Cancel , Execute Select “Execute” and press OK to restore all parameters t[...]

25 USING THE SETUP MENU INPUT SCREENS Camera Name Input After selecting the Camera Name parameter (the only setting is "Input"), press OK . If necessary, delete the previous or default name by pressing the RIGH T key until the bac kspace symbol ( ) (located between letters "A" & "B", also between "j" &[...]

26 Fig. 5 : Attaching the Belt MOUNTING and POSITIONING the TROPHY CAM HD Mounting After you’ve set up the camera’s parameters to your personal preferences at home or in your truck, you’re ready to take it outside and slide the power switch to “ ON ” . When setting up the T rophy Cam H D for scouting game or other outdoor applications, yo[...]

27 Another socket, on the bac k of the camera, is also provided for accessory mounting devices. T wo optional mounting accessories, a “Bear S afe” metal camera box (#119 657C for 119 676C/11967 7C, #11 9 65 8C for 119 67 8C) and Deluxe T ree Bracket (# 1196 52C fits all 3 camera models) are also available-please see your Bushnell dealer or web[...]

28 farther the possible sensing distance. The average sensing distance is about 45 ft. Before leaving the camera unattended, please check for the follo wing: • Are the batteries or DC power supply inserted/connected with correct polarity and is the power level is sufficient? • Does the SD card have sufficient available space and is its write-[...]

29 Reviewing Images by Connecting the Camera to a Computer Y ou can always unmount the entire camera from the tree and connect its US B port to a computer-it will be recognized as a “removable disk” , without the need to install any drivers or software. When using a PC (or Mac*) to view photos (or video clips*), first connect the device to the[...]

30 DOWNLOADING THE PHOTOS/VIDEOS T o download your photos/videos to a P C or Mac*, first make sure the T rophy Cam H D power switch is in the OFF position. Connect the supplied cable to the camera’s USB port, then directly to a main U SB port on your computer- do not use front panel/keyboard US B ports or unpowered “hubs” . The T rophy Cam H [...]

31 Camera takes continuous images of no subject A camera has what is known as a “false trigger” if the PI R sensor thinks that there is motion and heat in front of the camera lens when there is no subject in the image. These “False T riggers” are the result of placing the camera in an environment where there is motion associated with tree b[...]

32 2. Check the batteries to make sure that they are new alkaline or lithium AA batteries. See note above about short batter y life. 3. Make sure that the camera power switch is in the “On ” position and not in the “Off” or “Setup” modes. 4. Make sure that you are using a good quality SD card in your camera. Bushnell recommends SanDisk [...]

33 c . Please note that when the Capture Number parameter is set higher than "1 Photo", or with very short Interval settings, some images may appear darker than others due to the quick response and rapid retriggering of the camera, allowing less time for the flash to fully recharge before firing again. d . Make sure "LE D Control&q[...]

34 b . Make sure that the camera has good batteries in it. Near the end of the battery life, the camera may choose to record shorter video clips to conserve power. Date/Time Stamp not appearing on images Make sure that the “Time Stamp” parameter is set to “On” . Photos Do Not Capture Subject of Interest 1. Check the “Sensor Level” (PI R[...]

35 3. Screen comes on but then powers off Make sure that you have installed the SD card correctly. Camera won’ t retain settings Make sure that you have been saving the changes to any parameter settings that you made while in Setup mode, by pressing “OK” after changing the setting. If you don’t save your new setting after changing it, the c[...]

36 Maximum Pixel Size 3264x24 48 (8M P) Lens F = 3.1; FO V=45°; Auto I R-Cut-Remove (at night) I R-Flash Range Selectable (Low/ Med/ High), up to 6 0’(19m) on High Display Screen Monochrome Display: 24x32mm(1.5”) Memory Card SD or S DH C Card, Maximum capacity 32G B Internal RAM 32MB Picture Size 8M P = 3264x24 48; 5M P = 25 92x194 4; 3M P = 1[...]

Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer. Y our Bushnell® product is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of a defect under this warranty , we will, at our option, repair or replace the product, pr[...]

FCC COMPLIANCE ST A TEMENT : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions: (1) This devi[...]

[...]

©2014 Bushnell Outdoor Products F or further questions or additional information please contact: Bushnell Outdoor Products 9200 Cody , Overland P ark, K ansas 662 1 4 (800) 423-3537 • www .bushnell.com[...]