Canon 6609B074 инструкция обслуживания

E Basic Instruction Manual C OP Y[...]

2 The EOS M is a high-performance, in terchangeable-lens digital camera featuring a fine-detail CMOS sensor wi th approx. 18.0 effective megapixels, DIGIC 5, high-precision and high-sp eed 31-point AF , approx. 4.3 fp s continuous shooting, a nd Full High-Definition (Full HD) movie shooting. The camera is highly responsive to an y shooting situatio[...]

3 This Basic Instruction Manual onl y explains the camera’ s basic operations and functions for basic shooting with the EOS M atta ched with an EF-M lens. For more det ailed instructions such as shooting with EF and EF-S lenses with Mount Ad apter EF-EOS M, advanced shooting and playback procedures, printi ng photos, and Custom Functions, see the[...]

4 Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer . * Battery Charger LC-E12 or LC-E12E is provided. (The LC-E12E comes with a power cord.) If you purchased a Camera Kit, che ck that all the components are included. Depending on the Camera Kit, these may include a [...]

5 Icons in this Manual < 5 > : Indicates the Main Dial to be turned. < W j / i >/< X L >/< Y A >/< Z O > : Indicates the Main Dial buttons on the top, bottom, left, or right to be pressed. < Q / 0 > : Indicates the Main Dial to be pressed at the center . 0 , 9 , 7 , 8 : Indicates that the corresponding function r[...]

6 2 1 Introduction 2 Instruction Manuals ..... ........................................................... .................... 3 Item Check List............ ............................................................................... 4 Conventions Used in this Manual ...................... ......................................... 5 Handling Pr[...]

7 Contents 3 4 5 4 Shooting Close-ups (Close-up) ................................ ........................... 58 5 Shooting Moving Subjects (Spo rts) ......................... ........................... 59 6 Shooting Night Portraits (Night Po rtrait) (With a Trip od) ..................... 60 F Shooting Night Scenes Handheld (Handheld Night Sc ene)[...]

8 Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. Do not point the camera-attached lens toward the sun. The sun’ s heat can damage the camera’s internal component s. The camera is not waterproof and cannot be used underwater . If you accidentally drop the camera into water , promptly consult th[...]

9 Handling Precautions LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, ther e may be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor[...]

10 Quick Start Guide 1 Insert the battery (p.22) . Charging the battery: p.20 2 Insert a card (p.22) . With the card’s la bel facing toward the front of the camera, insert it into the card slot. 3 Att ach the lens (p.30) . Align the lens’ index with the camera’s index. 4 Press the power button to turn on the camera, and set < A > (Scene[...]

11 Quick Start Guide 5 Focus the subject (p.35) . Aim the LCD monitor ’s center over the subject. Press the shutter button halfway , and the camera will focus the subject. 6 T ake the picture (p.35) . Press the shutter button completely to take the picture. 7 Review the picture ( 9 ? ) . The captured image will be displayed for approx. 2 sec. on [...]

12 Nomenclature < V > Focal plane mark (p.58) Flash-sync contacts Self-timer lamp/ AF-assist beam Speaker (p.84) Hot shoe Microphone Strap mount (p.19) Remote control sensor T erminal cover Lens release button (p.31) < Y > External microphone IN terminal < D > HDMI mini OUT terminal < q / C > Audio/video OUT/Digital terminal[...]

13 Nomenclature DC Coupler terminal cover < o > Movie Start/Stop button ( p . 76) LCD monitor/T ouch screen (p.39, 44/45, 82, 85) Power/Access lamp (p.24) < M > Menu button (p.39) < x > Playback button (p.64) < Q / 0 > Quick Control/ Setting button (p.36/39) < B > Info button (p.36, 44, 64, 78) Card/Battery compartment[...]

Nomenclature 14 Screen Display *: Displayed when an Eye-Fi card is used. The display will show only the settings currently applied. Image-recording quality ( 9 ? ) 73 Large/Fine 83 Large/Normal 74 Medium/Fine 84 Medium/Normal 7 a Small 1/Fine 8 a Small 1/Normal b Small 2 (Fine) c Small 3 (Fine) 1 + 73 RA W+Large/Fine 1 RA W Shutter speed Eye-Fi tra[...]

15 Nomenclature Mode Dial Switches to < A > Scene Intell igent Auto, < z > S till Photos, or < k > Movies. Shoot still photos with < A > or < z >, or shoot movies with < k >. < A > Scene Intelligent Auto enables you to just press the shutter button to take a picture with the camera taking care of everything[...]

Nomenclature 16 Basic Zone All you do is press the shutter button. Th e camera sets everything to suit the subject or scene. C : Creative Auto (p.54) 2 : Portrait (p.56) 3 : Landscape (p.57) 4 : Close-up (p.58) 5 : Sport s (p.59) 6 : Night Portrait (p.60) F : Handheld Night Scene (p.61) G : HDR Backlight Control (p.62) Movies With < k > Movie[...]

17 Nomenclature Lens EF-M Lens (Lens with no focus mode switch and no Image S tab ilizer switch.) * Instructions for EF lens, EF-S lens and Mount Adapter EF-EOS M are in the Camera Instruction Manual PDF file. Focusing ring ( 9 ? ) Hood mount Filter thread (front of lens) Lens mount index (p.30) Contacts (p.9) Zoom ring (p.31) Zoom position index ([...]

Nomenclature 18 Battery Charger LC-E12 Charger for Battery Pack LP-E12 (p.20). Battery Charger LC-E12E Charger for Battery Pack LP-E12 (p.20). Battery pack slot Power plug Charge lamp Full-charge lamp IMPORT ANT SAFETY INSTRUCTIO NS-SA VE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULL Y FOLLOW THESE INSTRUCTIONS. [...]

19 Getting Started This chapter explains preparatory step s before you start shooting and basic camera operations. Att aching the Strap Fit the strap’s met allic ring over the camera’s strap mount. Use a coin or similar tool to turn the stopper clockw ise until it stops (the index marks are aligned). Make sure the strap’s met allic ring is no[...]

20 1 Remove the protective cover . 2 Att ach the battery . Align the battery’s h mark with the battery charger ’s g mark. T o detach the battery , follow the above procedure in reverse. 3 Recharge the battery . For LC-E12 As shown by the arrow , flip out the battery charger ’s prongs and insert the prongs into a power outlet. For LC-E12E Conn[...]

21 Charging the Battery Upon purchase, the battery is not fully charged. Recharge the battery before using. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged batter y will gradually drain and lose its capacity . Af ter recharging the battery , det ach it and disconnect the charger from the power o[...]

22 Load a fully charged Battery Pack LP-E12 into the camera . The card (sold separately) can be an SD, SDHC, or SDXC memory card. SDHC and SDXC cards with UHS-I can also be used. Th e captured images are recorded onto the card. Make sure the card’ s write-protec t switch is set upward to enable writing/erasing. 1 Open the cover . Slide the lever [...]

23 Installing and Removi ng the Battery and Card 4 Close the cover . Press the cover until it snaps shut. When you set the power to < 1 >, the number of possible shots (p.26) will be displayed on the LCD monitor . 1 Set the power to < 2 >. 2 Open the cover . Make sure the LCD monitor and Power/access lamp are off, then open the cover . [...]

Installing and Removing the Battery and Card 24 After opening the card/battery compartment cover , be careful not to swing it back further . Otherwise, the hinge may break. When the Power/access lamp is blinking in orange, it indicates that images are being written to or read by the card, being erased, or data is being transferred. Do not open the [...]

25 If you set the power to < 1 > and the time zone/date/time setting screen appears, see page 27 to set the time zone and date/time. Pressing the power bu tton toggles between < 1 > and < 2 >. With the power < 2 >, holding down the < x > button for 2 sec. or longer will start the playback mode. When an EF-M lens is att[...]

Turning on the Power 26 When the power is turned on, the battery level will be indicated in one of four levels. z : Battery level is sufficient. x : Battery level is low , but the camera can still be used. c : Battery will be exhausted soon. (Blinks) n : Recharge the battery . Battery Life [Approx. number of shots] The figures above are based on a [...]

27 When you turn on the camera for the fi rst time, the T ime zone and Date/T ime setting screen will appear . First set the time zone, then set the date and time. Note that the shooting date/time a ppended to the captured images will be based on this date/time setting. Be sure to set the correct date/time. [ London ] is set by default. 1 Display t[...]

3 Setting the Time Zone, Date and Time 28 2 Under the [ 5 2 ] t ab, select [ Date/Time ]. On the Main Dial, press the < Y A >/ < Z O > button to select the [ 5 2 ] tab. On the Main Dial, press the < W j / i >/ < X L > button to select [ Date/Time ], then press < Q / 0 >. 3 Set the date and time. On the Main Dial, press[...]

29 1 Display the menu screen. Press the < M > button. 2 Under the [ 5 2] t ab, select [Language K ]. On the Main Dial, press the < Y A >/ < Z O > button to select the [ 5 2 ] tab. On the Main Dial, press the < W j / i >/ < X L > button to select [ Language K ] (the fifth from the top), then press < Q / 0 >. 3 Set[...]

30 The camera can use EF-M, EF , and EF-S lenses. T o attach an EF or EF-S lens to the camera, Mount A dapter EF-EOS M is required. 1 Remove the cap s. Remove the rear lens cap and the body cap by turning them as shown by the arrows. 2 Att ach the lens. Align the lens’ index with the camera’s index. T urn the lens as shown by the arrow until it[...]

31 Attaching and Detaching a Lens While pressing the lens release button, turn the lens as shown by the arrow . T urn the lens until it stops, then det ach it. Attach the rear lens cap to the detached lens. T o zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. T urning the zoom ring after achieving [...]

32 When you use the IS lens’ built-in Image S tabilizer , camera shake is corrected to obtain a sharper shot. * IS stands for Image S tabilizer . * Instructions for EF and EF-S lenses are in the Camera Instruction Manual PDF file. Set it with the menu*. By default, it is set to [ Enable ]. 1 Display the menu screen. Press the < M > button. [...]

33 About the Lens Image Stabilizer 1 Press the shutter button halfway . X The Image S tabilizer will operate. 2 T ake the picture. When the picture looks steady on the LCD monitor , press the shutter button completely to take the picture. Using the Image Stabilizer when Shooting The Image S tabilizer cannot correct “subject blur”, when the subj[...]

34 T o obtain sharp images, hold the came ra still to minimize camera shake. 1. W rap your right hand around the camera grip firmly . 2. Hold the lens botto m with your left hand. 3. Rest your hand’ s right index fi nger lightly on the shutter button. 4. Press your arms and elbows lightl y against the front of your body . 5. T o maint ain a stabl[...]

35 Basic Operation The shutter button has two steps. Y ou can press the shutter button halfway . Then you can further press t he shutter button completely . Pressing halfway The camera will focus and adjust the exposure automatically (shutter speed and aperture set automatically). The exposure setting (shutter speed and aperture) is displayed ( 8 )[...]

36 Y ou can directly select and set the sh ooting functions displayed on the LCD monitor . This is called the Quick Control screen. There are two types of Quick Control screens: Q Quick Control and B Quick Control. 1 Q Quick Control Ta p [ Q ] on the screen or press < Q / 0 >. B Quick Control Press and hold the < B > button until the B [...]

37 Quick Control 3 T ake the picture. Press the shutter button completely to take the picture. Basic Zone modes Creative Zone modes B B Scene Intelligent Auto B Q Quick Control B Quick Control C OP Y[...]

Quick Control 38 Functions that can be set with Quick Control White balance ( 9 ? ) Picture S tyle ( 9 ? ) Auto Lighting Optimizer (p.47) Metering mode ( 9 ? ) AF method (p.66) AF operation ( 9 ? ) Creative filters ( 9 ? ) Image-recording quality ( 9 ? ) Shutter speed ( 9 ? ) AF operation ( 9 ? ) White balance ( 9 ? ) Highlight tone priority ( 9 ? [...]

39 Y ou can set various settings with the menus such as the image-recording quality , date/time, etc. Operate the menus with the < M > button, Main Dial, and < Q / 0 > button. The menu applicable to the curre nt shootings mode is provided. 3 Menu Operations Menu Screen Main Dial LCD monitor < Q / 0 > < M > button Basic Zone [...]

3 Menu Operations 40 Ta b Menu items Menu settings A Shooting 5 Set-up 9 My Menu 3 Playback Creative Zone modes Movie shooting C OP Y[...]

41 3 Menu Operations 1 Display the menu screen. Press the < M > button. 2 Select a t ab. Press the < Y A >/< Z O > button to select a tab. For example, the [ A 3 ] tab refers to the screen displayed when the A (Shooting) tab’ s thir d icon [ ] from the left is selected. 3 Select the desired item. Press the < W j / i >/<[...]

42 If the card is new or was previously formatted by another camera or computer , format the card with the camera. When the card is formatted, all images and dat a in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If nec essary , transfer the images to a computer , etc., before formatt[...]

43 3 Formatting the Card The card is new . The card was formatted by a di fferent camera or a computer . The card is full with images or dat a. A card error is displayed ( 9 ? ) . Execute [Format card] in the following cases: What is low-level formatting? Perform low-level formatting if the card’s recording or readi ng speed seems slow or if you [...]

44 Each time you press the < B > button, the LCD monitor switches between the Live View screen and B Quick Control (p.36). Switching the LCD Monitor Display B Quick Control Appears when you press the < M > button. Press the button again to return to the Live View screen. Appears when you press the < x > button. Press the button ag[...]

45 The LCD monitor is a touch-sensitive pa nel that you can operate with your fingers. Also, on the camera back, yo u can turn the Main Dial to make a selection and press the dial’s top, bottom, lef t, right, or center . Y ou can operate this camera by touchi ng the LCD monitor or using the Main Dial (turning it or pressing the top, bottom, left,[...]

d Using the Touch Screen and Main Dial 46 Drag Menu screen (Sample display) Slide your finger wh ile touching the LCD monitor . Scale display (Sample display) Operations possible by dragging your finger on the screen Selecting a menu tab or it em af ter pressing the < M > button Setting a scale control Quick Control Playback operations (swipe[...]

47 Scene Intelligent Auto + Basic Zone Modes This chapter explains how to shoot with the Scene Intelligent Auto and Basic Zone modes. Basic Zone modes enable you to ju st point and shoot by pressing the shutter button. However , you can also blur the background (p.55), apply image effect s ( 9 ? ), and suit the lighting or scene ( 9 ? ). B About th[...]

48 < A > is a fully automatic mode. The camera analyzes the scene and set s the optimum settings automatically . With Scene Intelligent Auto, the came ra always focuses automatically . Y ou can select one of three AF methods with the menu or Quick Control screen. When you select [ u (face)+T racking ], the person’s face will be detected and[...]

49 A Fully Automatic Shooting (Scene Intelligent Auto) 3 Focus the subject. Press the shutter button halfway to focus. X When focus is achiev ed, the AF point will turn green and the beeper will sound. 4 T ake the picture. Press the shutter button completely . X The captured image will be displayed for approx. 2 sec. on the LCD monitor . The < A[...]

A Fully Automatic Shooting (Scene Intelligent Auto) 50 The AF point does not turn gree n and focus is not achieved. T ry again, aiming the AF point at an area with a good bright/dark contrast, then press the shutter butt on halfway . Also, focus might not be achieved if you are too close to the subject. Mo ve away from the subject and shoot. Multip[...]

51 With a digital camera, you should use a card with ample cap acity . If you cannot decide on the composition or which mode to use, you should shoot freely in various compositions and mo des. Even if the picture is slightly blurred, it can still convey somethin g. Y ou can always erase failed or unwanted images, so be sure to try many different sh[...]

A Full Auto Techniques (Scene Intelligent Auto) 52 When you shoot in the < A > mode, an icon represen ting the scene detected by the camera will be displayed. *1 : Displayed only when t he AF method is set to [ u +T racking ]. If another AF method is set, the “Non-Portrait” icon will be displayed even if a person is detected. *2 : Display[...]

53 1 T ap the shooting mode icon on the screen’ s upper lef t corner . The shooting mode selection screen will appear . 2 T ap the screen to select a shooting mode. Y ou can also select the shooting mode on the B Quick Control screen. T ap the arrow on either side of the screen to go to another page. The shooting mode screen has three p ages, the[...]

54 In the < C > mode, you can easily blur the background, change the drive mode or control the firing of an attach ed S peedlite flash. Y ou can also choose the ambience you want to convey in your images. The defaul t settings are the same as the < A > mode. * CA stands for Creative Auto. 1 T urn the Mode Dial to < z >, then selec[...]

55 C Creative Auto Shooting (1) Ambience-based shots ( Q Quick Control / B Quick Control) Y ou can choose the ambience you w ant to convey in your images. (2) Blurring/Sharpening the background ( Q Quick Control / B Quick Control) If you move the index mark toward th e left, the background will look more blurred. If you move it toward the ri ght, t[...]

56 This mode blurs the background to make the person stand out better . It also makes skin tones and th e hair look softer . The further the dist ance between the subject and background, the better . The further the distance between the subject and background, the more blurred the background will look. The subj ect will also stand out better in fro[...]

57 Suited for wide scenes when you want ever ything to be in focus from near to far . For vivid blues and greens, and very sharp and crisp images. With a zoom lens, use the wide-angle end. When using the wide-angle end of a zo om lens, objects near and far will be in focus better than at the teleph oto end. It also adds breadth to landscapes. Shoot[...]

58 For shooting flowers and small objects up close. T o make small things appear much larger , use a macro lens (sold separately). Use a simple background. When the background has no other flowers, leaves, etc., the close-up subject will stand out more. Move as close as possible to the subject. Check the lens for its minimum focu sing dist ance. So[...]

59 Use this mode to photog raph a moving subject. Shoot continuously . When you press the shutte r button halfway , the came ra will focus and the AF point will be fixed. While the camera focuses, the beeper will sound. If focus cannot be achieved, the AF point will turn orange. When the right moment comes, press th e shutter button completely to t[...]

60 Attach S peedlite 90EX and shoot portrait s with a beautiful and bright night scene in the background. Use a wide-angle lens and a tripod. When using a zoom lens, use the wide -angle end to obtain a wide night view . Also, use a tripod to prevent camera shake. T ake portraits without flash. When the S peedlit e’s power is < 1 >, the S pe[...]

61 For shooting night scenes while handho lding the camera. When you take a picture, four shots are t aken continuous ly to produce a single, bright photo that reduces camera shake. Hold the camera firmly . While shooting, hold the ca mera firmly and steadily . If the continuous shots are very misaligned due to camera shak e, etc., they may not ali[...]

62 When shooting a scene having both br ight and dark areas. When you take a picture, three continuous shots will be taken at dif f erent exposures. The loss of detail in highlights and shadows will be reduced in the final image. Hold the camera firmly . While shooting, hold the camera firmly and steadily . If the continuous shots are very misalign[...]

63 < F > (Handheld Night Scene) When shooting night scenes and other sce nes with multiple point-like light sources, the camera may not be able to focus automatically . In such cases, set the focus mode to [ MF ] and focus manually . When shooting flash photography , if the flash fires and the subject’s background is close enough to be illu[...]

64 The easiest way to play back images is explained below . For more details on the playback procedure, see page 81. 1 Play back the image. Press the < x > button. X The last captured image or last image viewed will appear . When the power is < 2 > and you hold down the < x > button for 2 seconds or longer , the power will turn &l[...]

65 * “Focus mode” will be displayed when an EF-M lens has been attached. * Instructions for EF and EF-S lenses are in the Camera Instruction Manual PDF file. 1 Select the AF method. Under the [ A 2 ] tab, select [ Focus mode ], [ AF method ], or [ Continuous AF ]. Select the item to be set, then press < Q / 0 >. Y ou can also select the [[...]

Changing the Focusing Method 66 Human faces are detected and focused. If a face moves, the AF point < p > also moves to track the face. 1 Check the AF point. When a face is detected, the < p > AF point will appear over the face to be focused. Y ou can also tap the screen to select the face or subject. If the subject is not a face, < [...]

67 Changing the Focusing Method If the focus is far off, face detect ion will not be possi ble. If you set [ Continuous AF ] to [ Enable ], you can prevent the image from becoming greatly out of focus. An object other than a human face may be detected as a face. Face detection will not work if the face is very small or large in the picture, too bri[...]

Changing the Focusing Method 68 Up to 31 AF points (automatically sele cted) covering a wide area can be used to focus. This wide area can also be divided into 9 zones for focusing (zone selection). 1 Select the AF zone. N Pressing the < X L > button will toggle between automatic selection and zone selection. In Basic Zone modes, automatic se[...]

69 Changing the Focusing Method Since only one AF point is used to fo cus, you can focus the target subject. 1 Move the AF point. T ap the screen where you want to focus to move the AF point. (It cannot go to the edges of the picture.) T o return the AF point to the center , press the < X L > button. 2 Focus the subject. Aim the AF point over[...]

Changing the Focusing Method 70 AF Operation Even when focus has been achieved, pressing the shutter button halfway will focus again. The image brightness may change du ring and after the AF operation. If the light source changes during auto focusing, the screen may flicker and focusing may be difficult. If this ha ppens, autofocus under the light [...]

71 Changing the Focusing Method Shooting conditions that make focusing difficult Low-contrast subjects such as the blue sky , solid-color flat surfaces or when highlights or shadow details are lost. Extremely bright or dark subjects. S tripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patte[...]

Changing the Focusing Method 72 The default setting is [ Enable ]. Since the focus is cons tantly close to the subject, when you press the shutter button, the camera quickly focuses the subject. If [ Enable ] is set, the lens will operate frequently and cons ume more battery power . This will reduce the number of possible shots (battery life). When[...]

73 Y ou can focus and take the picture au tomatically just by tapping the LCD monitor screen. This wor ks in all shooting modes. 1 Enable the touch shutter . Ta p [ y ] on the screen’s bottom left. Each time you tap the icon, it will toggle between [ y ] and [ x ]. When [ x ] is set, you can tap to focus and shoot. When [ y ] is set, you can tap [...]

74 1 Press the < W j / i > button. Y ou can also select the shooting mode on the B Quick Control screen. 2 T ap the self-timer . By tapping [ 2 ], you can return to the previous screen. Q : 10-sec. self-timer The remote controll er can also be used ( 9 ? ). l : 2-sec. self-timer q : 10-sec. self-timer plus continuous shot s Ta p [ W ]/[ X ] t[...]

75 Shooting Movies Set the Mode Dial to < k > to shoot movies. The movie recording format will be MOV . For more movie-shooting details, functions, and cautions, see the Camera Instruction Manual PDF file. Cards that can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 “ ” or higher . If the card’s[...]

76 Connecting the camera to a TV set is recommended to play back the movies shot ( 9 ? ). * For details on manual-exposure movie shooting ( M ), see the Camera Instruction Manual PDF file. When you select the Movie shooting mode [ k ], autoexposure is set to adjust the brightness automatically . 1 Set the Mode Dial to < k >. 2 Select [ k ] (M[...]

77 k Shooting Movies With certain lenses, focu s cannot be achieved with AF . Focus manually instead ( 9 ? ). If [ Movie Servo AF: Disable ] is set, you can focus by pressing the shutter button halfway . The ISO speed (100-6400), shutter speed, and aperture are set automatically . Press the < Y A > button to lock the current exposure setting [...]

k Shooting Movies 78 Each time you press the < B > button, the inform ation display will change. * When an Eye-Fi card is inserted in th e camera, the Eye-Fi transmission status ( 9 ? ) will be displayed. Movie Shooting Screen Movie shooting remaining time/Elapsed time Quick Control AF point ISO speed (Auto) Exposure compensation amount AE lo[...]

79 k Shooting Movies During movie shooting, note the following: If < Q > is set and the ISO speed or aperture changes during movie shooting, the white balance may also change. If you shoot a movie under fluorescent or LED lighting, the movie may flicker . Zooming the lens during movie shoot ing is not recommended. Zooming the lens can cause c[...]

C OP Y[...]

81 Image Playback This chapter explains basic operations to playback images and movies. About images shot and saved with another device The camera may not be able to prop erly display images captured with a different camera, edited with a co mputer or whose file name was changed. Viewing images on a large TV screen is a very different experience fr[...]

82 The LCD monitor is a touch-sensitive panel that you can touch with your fingers for playback operations. Press the < x > button to play back images. (The last shot will appear first.) If the power is off, you can hold down the < x > button for 2 sec. or longer to turn on the camera and display the playback screen. Swipe with one fing[...]

83 d Playing Back with the Touch Screen Pinch two fingers. T ouch the screen with two fingers spread apart, and pinch your fingers together on the screen. Each time you pinch your fingers, the screen changes from a single-image display to a 4-image index display and 9- image index display . The selected image on the index display is indicated in an[...]

84 1 Play back the image. Press the < x > button to display images. 2 Select a movie. Press the < Y A >/< Z O > button to select a movie. On the single-image display , the < 1 > icon displayed on the upper left indicates a movie. If the movie is a video snapshot, < > will be displayed. Y ou can press the < B > bu[...]

85 k Playing Movies Movie Playback Panel * When background music is set, the movie’s sound will not be played. Ta p [ 7 ] at the center of the screen. X The movie will start playing. T o display the movie playback panel, tap < 1 > on the upper left of the screen. T o pause the movie whil e it is playing, tap the screen. The movie playback p[...]

86 Instruction Manuals in the CD-ROM and Software Start Guide This chapter explains how to view the instruction manual PDF files in the provided CD-ROMs. It also introduces the software contained in the EOS DIGIT AL Solution Disk (CD-ROM) and explains how to install them to your personal computer . Instruction Manual EOS DIGIT AL Solution Disk (Sof[...]

87 Camera Instruction Manual The Instruction Manual CD-ROM has the following PDF files: Camera Instruction Manual, Lens Instruction Manual (EF- M18-55mm f/3.5-5.6 IS STM and EF-M22mm f/2 STM), Mount Adapter EF-EOS M Instru ction Manual, and S peedlite 90EX Instruction Manual. Explains all the camera’s functions an d operation procedures and inclu[...]

Viewing the Instruction Manual CD-ROM 88 3 Double-click the “ST ART” file. The screen shown in step 4 will appear . The icon that appears will dif fer depending on your computer . 4 Click on the name of the instruction manual you want to view . Click on the name of the in struction manual under the desired language. X The Instruction Manual in [...]

89 EOS DIGITAL Solution Disk This disk contains various so f tware applications for EOS DIGIT AL cameras. With the camera connected to a person al computer , EOS Utility enables you to transfer still photos and movies shot with the camera to the computer . Y ou can also use EOS Utility to set variou s camera settings. Also, you can copy background [...]

90 1 Insert EOS DIGIT AL So lution Disk (CD-ROM). For Macintosh, double-click to open the CD-ROM icon displayed on the desktop, then double-click on [ Canon EOS Digit al Inst aller ]. 2 Click [Easy Inst allation] and follow the on-screen instructions to inst all. For Macintosh, click [ Install ]. If install screen for “Microsof t Silverligh t” [...]

91 Contains the Sof tware Instruction Manuals. 1 Insert the [Sof tware INSTRUCTIO N MANUAL] CD-ROM into your computer . 2 Double-click the CD-ROM icon. For Windows, the icon is displayed in [ (My) Computer ]. For Macintosh, the icon is displayed on the desktop. 3 Copy the [English] fold er to your computer . Instruction Manual PDFs with the names b[...]

92 For the latest compatibility information (including new OS versions), refer to your local Canon Web site. Windows *1 Compatible with 32-bit/64-bit systems fo r all versions exce pt St arter Edition *2 Comp atible with 32-bit/64-bit systems for Service Pack 1 and Service Pack 2 except S tarter Edition *3 Compatible with Service Pack 3 *4 .NET Fra[...]

93 Software System Requirements Windows *1 Compatible with 32-bit/64-bit systems fo r all versions except S tarter Edition *2 Comp atible with 32-bit/64-bit systems for Service Pack 1 and Service Pack 2 except S tarter Edition *3 Compatible with Service Pack 3 *4 Core2 Duo or higher is recommended *5 For Windows 7 64-bit systems, minimum 2GB Macint[...]

Software System Requirements 94 Windows * Silverlight 5.1 (100MB maximum) or hi gher must be installed. Additionally , in Windows XP , Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time, depending on computer performance. Macintosh * Silverlight 5.1 (100MB maximum) or higher must be installed. For[...]

95 Software System Requirements Windows *1 Compatible with 32-bit/64-bit systems fo r all versions except S tarter Edition *2 Compatible with 32-bit/64-bit systems for Service Pack 1 or Service Pack 2 for all versions except S tarter Edition *3 Compatible with Service Pack 3 *4 .NET Framework is Microsoft softwa re. It is installed together with PS[...]

96 Safety Warnings Follow these safeguards and use the e quipment properly to prevent injury , death, and material damage. Preventing Serious Injury or Death • T o prevent fire, excessive heat, chemical le akage, and explosions, fo llow the safeguards below: - Do not use any batteries, powe r sources, and accessories not specified in this booklet[...]

97 • Do not disassemble or modify the equipment . High-voltage internal parts can cause electrical shock. • Do not look at the sun or an ex tremely bright light source thro ugh the camera or lens. Doing so may damage your vision. • Keep the camera from the reac h of small children. The neck strap can accidentally choke the child. • Do not s[...]

98 Digit al Camera Model DS126391 Systems This device complies with Part 15 of t he FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer ence received, including interference that may cause undesired operation. Note: This equipment has been [...]

99 IMPORT ANT SAFETY INSTRUCTIONS 1. SA VE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E12 & LC-E12E. 2. Before using the charger , read all in structions and cautionary remarks on (1) the charger , (2) the battery p ack, and (3 ) the product using the battery pack. 3. CAUTION ?[...]

CPH-E035-000 © CANON INC. 2012 The lenses and accessories mentioned in this Instruction Manual are current as of July 2012. For information on the camera’s compatibility with any lenses and accessories introduced after this date, contact any Canon Service Center . CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan U.S.A. CANON[...]