Canon S20 инструкция обслуживания

This guide is for both PowerShot S10 and PowerShot S20 digital cameras. Please read the notice on the next page befor e using your camera for the first time. Refer to this guide for camera operating instructions and the Softwar e Starter Guide for computer and software r elated instructions. Ca m e r a U s e r G u i d e Ca m e r a U s e r G u i d e[...]

Notice: Please ensur e that you read and follow the handling and safety pr ecautions on pages 5 to 10 of this guide befor e attempting to use the camera. This user guide is for both the PowerShot S10 and PowerShot S20 models. The model shown in this guide is the PowerShot S20. Unless otherwise noted, the menus and illustrations apply to both the Po[...]

Disclaimer • While every effort has been made to ensure that the infor mation contained in this guide is accurate and complete, no liability can be accepted for any err ors or omissions. Canon Inc. reserves the right to change the specifications of the har dware and software described her ein at any time without prior notice. • No part of this [...]

1 • Connect the equipment into an outlet on a circuit dif ferent fr om that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is requir ed to comply with Class B limits in Subpart B of Part 15 of the FCC Rules. Do not make any changes or modifications to the equipment [...]

2 T able of Contents Read This First ............................................ 5 Pr eparing the Camera Guide to Components ............................... 11 Front View ........................................... 11 Back View ........................................... 12 Operation Panel ................................... 13 Mode Dial .........[...]

3 Shooting Shooting in Manual Mode ........................ 35 Shooting in Image Mode .......................... 36 Shooting in Stitch Assist Mode ................. 37 How to Frame a Subject ....................... 38 Camera Positioning .............................. 38 Shooting ............................................. 39 Changing the Resoluti[...]

4 Erasing Quick Erase ............................................... 60 Erasing All Images .................................... 60 Protecting Images .................................... 61 Camera Settings Displaying the Setup Menu ..................... 63 Setting the Beep On/Off .......................... 6 4 Adjusting the LCD Monitor Brightness .[...]

5 Read This First Please Read T est Shots Befor e you shoot images of subjects of impor tance to you, we highly r ecommend that you shoot several trial images to confir m that you are operating the camera cor rectly . Please note that Canon Inc., its subsidiaries and af filiates, and distributors of its digital cameras ar e not liable for any conse[...]

6 Safety Precautions • Before using the camera, please ensur e that you have r ead and understood the safety pr ecautions described below . Always ensur e that the camera is operated cor rectly . • The safety pr ecautions noted on the following pages ar e intended to instruct you in the safe and cor rect operation of the camera and its accessor[...]

7 Read This First • Do not attempt to disassemble or alter any par t of the equipment that is not expr essly described in this guide. Disassembly or alteration may r esult in high-voltage electrical shock. Inter nal inspections, alterations and r epairs should be conducted by qualified ser vice personnel authorized by your camera distributor or a[...]

8 • Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fir e. • Do not cut, damage, alter or place heavy items on the power adapter cor d. Any of these actions may cause an electrical shor t circuit, which may lead to fir e or elec[...]

9 Read This First • Do not short-cir cuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries. Use the supplied batter y case to transport or stor e the battery pack. • Befor e you discar d a battery , cover the terminals with tape or other insulators to pr event direct contac[...]

10 • Be careful not to bang the camera or subject it to str ong impacts or shocks that could lead to injur y or damage the equipment when wearing or holding it by the wrist strap. • Be careful not to cover the flash with your fingers when shooting. In addition, do not touch the sur face of the flash after taking several pictur es in rapid succe[...]

11 Pr eparing the Camera Guide to Components This section explains how to install the batteries, CF card and wrist strap. * Used when the camera is connected to a computer . Open the cover and connect the interface cable to the camera’ s digital terminal and the computer . See the Software Starter Guide for additional information. • AF Auxiliar[...]

12 * The LCD monitor is produced with extr emely high- precision manufacturing techniques. Mor e than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfir e or appear as black or red dots. This has no ef fect on the recorded image and does not constitute a malfunction. • CF Card Slot Cover (p. 20) ?[...]

13 Preparing the Camera Operation Panel • Omni Selector Button, (T elephoto) / (Wide Angle) Button (p. 29) • (Exposure/White Balance) Button (pp. 43, 44) • MENU / SET Button • DISPLA Y Button (pp. 27, 52) • Mode Dial (p. 14) • (Flash) Button / (Multi) Button (pp. 30, 33) • Shutter Button (p. 28) • Indicators (p. 15) • (Macro) /Jum[...]

14 Mode Dial The Mode Dial is used to select the r ecording and play modes. • (Off) T ur n the dial to this position when the camera is not being used. The lens cover will close and the camera will power down. (p. 26) • (Auto Mode) A r ecording mode in which the camera automatically selects most of the settings. (p. 30 ) • (Manual Mode) A r e[...]

15 Preparing the Camera Display Panel The camera status is shown in the display panel. Settings, the remaining image capacity and t he battery charge are among the data it displays. • The above example shows all the symbols appearing at once for illustration purposes. In fact, only the applicable symbols are displayed at any one time. • Operati[...]

16 Pr eparing the Battery Pack Battery Pack NB-5H, Compact Power Adapter CA-PS100/100E, power cor ds, DC Coupler DR-100A and 2CR5 lithium batteries ar e sold separately in some r egions. T o confirm the package contents, see the back of the System Map packaged with your camera. Charging the Battery Pack Use the pr ocedures below to fully charge Bat[...]

17 Preparing the Camera • The battery pack continues to discharge a minimal portion of its power while installed in the camera, even with the camera power of f. This will shorten the battery life. Remove it from the camera during extended periods of disuse. Place it into the case provided and store it in a cool, dry place. Be sure to charge it fu[...]

18 4 Close the battery cover . • A flashing green indicator signals that an image is being written to, or read from, the CF card. Do not open the battery cover while this is in process. • Remove the battery from the camera when the camera is not in active use. • Use the rechargeable Battery Pack NB- 5H or the AC adapter (sold separately in so[...]

19 Preparing the Camera Battery Performance PowerShot S10/PowerShot S20 * The actual per formance may vary from the above data accor ding to the shooting conditions and the selected r ecording mode. T est Conditions Recor ding: 73 ° F (23 ° C), (Large)/ (Fine), Zoom used, flash used once every 4 shots, CF car d used Replay: 73 ° F (23 ° C), con[...]

20 • Battery Pack NB-5H cannot be charged while the compact power adapter is used to power the camera. • Do not use the compact power adapter to power any device other than one for which Battery Pack NB-5H is specified. Installing a CF Car d • Please note that CF cards formatted or edited in another manufacturer’ s camera or application pro[...]

21 Preparing the Camera About CF Car ds • CF cards are high-precision electronic devices. Do not bend, apply force to, or subject them to shocks or vibration. • Do not attempt to disassemble or alter a CF card. • Moving a CF card rapidly between temperature extremes will cause condensation to form in the card and may lead to a malfunction. T [...]

22 Pr ecautions with CF Cards Please note that the PC car d icon may take a moment (about 1 minute) to appear on the T askbar of certain computers after insertion in a PC car d slot. If this occurs, you should delete the Windows standard driver and install the SanDisk A T A FlashDisk device driver . The procedur es are described below . Please cons[...]

23 Preparing the Camera Setting the Date and Time The Set Date/T ime menu will appear the first time the camera is turned on after it is purchased. Use the following pr ocedures to set the correct date and time. 1 T urn the Mode Dial to the , , , or position. The Set Date/ T ime menu will display the first time the camera is turned on. 2 Set the da[...]

24 Attaching the W rist Strap 1 Slip the small loop at the end of the wrist strap through the strap holder . 2 Pass the other end of the wrist strap through the small loop. 3 Pull the strap through the loop until the loop slips over the plastic part of the strap. • Be careful not to wave the camera about or to catch it on other items when holding[...]

25 Preparing the Camera Connecting to a TV The supplied video cable (VC-100) can be used to connect the camera to a TV to use the TV as a viewfinder for recor ding or a monitor for playback. 1 T urn the Mode Dial to the position. 2 T urn off the TV . 3 Connect the video cable to the VIDEO OUT terminal on the camera and the Video In jack on the TV .[...]

26 Basic Functions Befor e Shooting T ur ning the Power On/Of f 1 T urn the Mode Dial to any position other than to power the camera. The camera power is off when the Mode Dial is set to and on in any other position. Power Save Function • Shooting Mode When the LCD monitor is on, it will automati- cally shut off after approximately 3 minutes if n[...]

27 Basic functions Using the V iewfinder The camera is equipped with an optical viewfinder for composing or dinary photographs. 1 Look through the viewfinder to align the camera with the primary subject. The square brackets (autofocus metering field) in the viewfinder should be placed on the primary subject. Viewfinder Square Brackets in Viewfinder[...]

28 • The following data is shown in information view . • The last on/off setting of the LCD monitor is saved when the power is manually shut off. The camera will automatically restore the LCD monitor to the last setting at startup. • However , until the battery is replaced, the LCD monitor will not turn on automatically if a low battery cause[...]

29 Basic functions • The camera blur warning icon ( ) will appear at the center of the LCD monitor and the upper indicator will flash red when there is insuf ficient light. Activate the flash or secure the camera on a tripod before shooting. Setting the Zoom The zoom can be adjusted to any setting in the 35 to 70 mm range for the PowerShot S10 an[...]

30 Shooting in Auto Mode In auto mode, the focus, exposur e and flash settings are automatically set, making it possible for anyone to photograph ef fortlessly . The r esolution is preset to Large and the compr ession to Fine and these settings cannot be changed in this mode. 1 T urn the Mode Dial to the position. 2 Point the camera at the center o[...]

31 Basic functions (Flash On) Flash fires with every shot. (Flash Off) Flash will not fire 3 Shoot. • The flash is set to fire when the indicator shines red. Flash Settings The flash cannot be fired in cer tain shooting modes. Red-Eye Reduction The red-eye phenomenon is caused by light reflecting back from eyes photo- graphed in dark areas with a[...]

32 the shutter activation. T o deactivate the self- timer mode, press the button. • T urn the Mode Dial to to cancel a self-timed shot after the shutter button has been pressed. Using the Focus Lock Use the focus lock to bring a main subject at the edges of a composition into focus or when the subject is not suited to autofocus photography . 1 T [...]

33 Basic functions Replaying Images Photographed images can be viewed in play mode on the LCD monitor . 1 T urn the Mode Dial to the position. The last photographed image will appear in the display (single image r eplay). 2 Use the and buttons to switch to the previous or next image. 3 Press the button. Nine images ar e shown at once (multi image r[...]

34 Erasing Single Images 1 T urn the Mode Dial to the position. 2 Press the MENU button. 3 Use the button to select the [Single Erase]. Press the SET button. 4 Use the and buttons to select an image. Press the SET button. 5 Select [OK] with the button. Press the SET button. T o erase additional images, repeat steps 4 and 5. T o stop partway through[...]

35 Shooting Shooting in Manual Mode In this mode, you can manually select features such as resolution, compr ession, exposure compensation and white balance settings. 1 T urn the Mode Dial to the position. 2 Adjust the settings as required. • Y ou can adjust all settings, such as the flash, continuous shooting, exposur e compensa- tion, white bal[...]

36 Shooting in Image Mode In image mode, the camera automatically optimizes its shooting settings for specific cir cumstances, such as landscapes, moving objects, night scenes and black and white images. Landscape: for recording broad expanses of scenery Fast Shutter: for recording fast moving objects, such as sports figures Slow Shutter: for recor[...]

37 Shooting Shooting in Stitch Assist Mode In Stitch Assist mode, you can shoot images that overlap for later merging into a panorama with software on a computer . Images can be photographed in horizontal, vertical or 2 x 2 arrangements. • Please use the supplied PhotoStitch program to merge the images on a computer . Horizontal Series V ertical [...]

38 What is the Stitch Function? • Stitching is the process of merging digital camera images so that the seams are invisible. Expansive scenes can be dynamically presented in their entirety . How to Frame a Subject The stitch function detects the overlapping portions of adjoining images and merges them. When shooting, try to include a distinctive [...]

39 Shooting Documents T o recor d close-ups of documents, shift the camera above the document, keeping it parallel to the document. For a vertical series, tilt the camera up or down. Shooting Select fr om the following image arrangements. Right: left to right in a horizontal plane Left: right to left in a horizontal plane Up: bottom to top in a ver[...]

40 3 Shoot the first frame. • Pr ess the SET button again if you wish to change the image arrangement setting. • The settings for the exposur e and white balance are locked at the values used for the first image. 4 Shoot the second image so that it overlaps the first. • Horizontal Example • 2 x 2 Example • Pr essing the , , or button retu[...]

41 Shooting Changing the Resolution/ Compr ession Images can be r ecorded at the following resolution and compr ession settings. Resolution Compr ession Approximate File Size of One Image • The actual volume may vary from the above data according to the shooting conditions and r ecording mode. • See page 21 for the number of images that will fi[...]

42 Shooting Close-Ups (Macr o Mode) Use the macr o mode to recor d subjects close to the lens. The range is 4.7 to 18 in. (12 to 46 cm) fr om the tip of the lens for the PowerShot S10 and 4.7 to 26 in. (12 to 66 cm) for the PowerShot S20. Always use the LCD monitor in macr o mode to check the image composition and focus. 1 T urn the Mode Dial to th[...]

43 Shooting Adjusting the Exposur e Compensation Use the exposur e compensation feature when a backlit object appears too dark or lights ar e too bright in a night scene. 1 T urn the Mode Dial to the , or position. 2 Press the button to display the exposure compensation settings bar . 3 Use the and buttons to select an adjustment value. • Y ou ca[...]

44 Setting the White Balance Adjust the white balance settings to r espond to shooting conditions when you ar e r ecording outdoors or under artificial illumination. Auto: for recording with the settings automatically selected by the camera Daylight: for recording outdoors on a bright day Cloudy: for recording under overcast, shaded, dusk or evenin[...]

45 Shooting Shooting with the AE Lock When the AE lock is used, you can meter the exposur e and focus independently . Use this function when you need to change the image composition after you have set the exposur e setting. 1 T ur n the Mode Dial to the position. Press the DISPLA Y button to turn on the LCD monitor . 2 Aim the camera so that the su[...]

46 2 Hold the SET button. Press the or button to select a metering method. • Release the SET button to make the setting effective. • In the spot mode, a frame indicating the metering field is shown in the LCD monitor . The camera measur es the light in the area covered by this frame. • Y ou can r ecord anytime by pr essing the shutter button.[...]

47 Shooting • Contrast • Sharpness • Pr ess the MENU button to close the menu. • The 0, +1.0 and +2.0 gain settings are equivalent to the respective ISO 100, 200 and 400 sensitivity levels. Raise the gain when you wish to record in dark surroundings or when you wish to increase the shutter speed. • Raising the gain may increase the “noi[...]

48 Switching the Review Featur e On/Off Setting this featur e on or off determines whether or not you can r eview the photo- graphed image in the LCD monitor when the LCD monitor is turned off. 1 T urn the Mode Dial to the , , or position. Press the MENU button. 2 Use the and buttons to select [Review]. 3 Use the and buttons to select [On] or [Of f[...]

49 Shooting Off: The last assigned file number is stor ed and the next available file number is assigned to an image r ecorded on any CF car d, including a new CF card. 1 T ur n the Mode Dial to the , , or position. Press the MENU button. 2 Use the and buttons to select [File No. Reset]. 3 Use the and buttons to select [On] or [Off]. • Pr ess the[...]

50 Replaying Magnifying an Image (Single Image Replay) 1 T urn the Mode Dial to the position. 2 Press the button. • Y ou can use the , , and buttons to shift the display within the image. • Pr ess the button again to end the magnification mode. • The currently displayed image can be deleted by holding the SET button down and pressing the butt[...]

51 Replaying • Pr ess the MENU button to end the Rotate featur e. • Images that have been rotated with the camera may not, depending on the software program used for loading, remain rotated when loaded onto the computer . 270 ° 0 ° (Original) 90 ° Jumping Images The display can be jumped forwar d or back. 1 T urn the Mode Dial to the positio[...]

52 V iewing Image Information 1 T urn the Mode Dial to the position. 2 Press the DISPLA Y button. • The LCD monitor will cycle to the next display mode (simple, detail, non display) each time the DISPLA Y button is pressed. The detail display is not available in multi image replay mode. • The following information is shown in the simple display[...]

53 Replaying 3 Use the and buttons to select [Program]. 4 Use the and buttons to select [All Images], [Show 1], [Show 2] or [Show 3]. 5 Use the , , and buttons to select [Start]. Press the SET button. The slide show will start. • Pr ess the SET button to pause or restar t it. • When a slide show is paused, or the Play T ime is set to Manual, yo[...]

54 5 Use the and buttons to move between images and the button to mark the image. A number repr esenting the or der of the marked image in the slide show will appear at the top of the LCD monitor . The image will automatically play in that or der . • Pr ess the button to unmark the selected image. • Pr ess the button to switch between the singl[...]

55 Replaying Setting the Auto Replay On/Of f Y ou can set the slide show to close after it finishes displaying all its images or to automatically r epeat. 1 Display the Slide Show menu. 2 Use the , , and buttons to select [Setup]. Press the SET button. 3 Use the and buttons to select [Repeat]. 4 Use the and buttons to select [On] or [Off]. • Pr e[...]

56 3 Use the and buttons to select [Order]. Press the SET button. 4 Specify the number of prints. Mark Selected Images Specify one of the following for the print type. (p. 57) For the Standar d or Both options, use the and buttons to select an image and the and buttons to specify the number of copies. For the Index option, use the and buttons to se[...]

57 Replaying • Images will be printed in the order of older to newer . • A maximum of 998 images may be marked for printing. • Please note that the print settings created on a CF card by a DPOF-compliant camera other than a PowerShot S10 or PowerShot S20 may be overwritten when used in either model. • Some printers or photo developing servi[...]

58 4 Use the and buttons to select [On] or [Of f]. • Pr ess the MENU button to close the Setup menu. • The date printout will be in the style selected in the Set Date/T ime option. (p. 65) Setting the File Number Print Function 1 Display the Print Order menu. 2 Use the and buttons to select [Setup]. Press the SET button. 3 Use the and buttons t[...]

59 Replaying Resetting Print Settings This procedur e deletes all the image print settings, including the date and file number print settings. 1 Display the Print Order menu. 2 Use the and buttons to select [Reset]. Press the SET button. 3 Use the and buttons to select [OK]. Press the SET button.[...]

60 Erasing Quick Erase The camera buttons can be used to delete an image dir ectly when in the single image replay (p. 33), multi image r eplay (p. 33) or review mode (p. 48). 1 Hold the SET button and press the button. 2 Use the and buttons to select [OK]. Press the SET button. • Protected images are not erased. This section explains how to eras[...]

61 Erasing 3 Use the and buttons to select [OK]. Press the SET button. • If you want to stop the erase pr ocedure, select Cancel. • Protected images are not erased. • Please note that erased images cannot be recovered. Please exercise adequate caution before erasing a file. Pr otecting Images Y ou can protect important images to pr event thei[...]

62 Protected images will be shown with the icon. • The image pr otection is removed if the SE T button is pressed a second time after Step 3. • Pr ess the button to switch between the single image replay and multi image r eplay modes to select images. • Pr ess the MENU button to close the Setup menu. Protected Icon • All data, including pro[...]

63 Camera Settings Displaying the Setup Menu 1 T urn the Mode Dial to the , , , or position. 2 Press the MENU button. • The Rec. Menu or Play menu will display . 3 Use the button to select the Setup menu. This section explains about the camera settings, such as the beep, the date and time and CF card formatting. • The procedures for accessing t[...]

64 Setting the Beep On/Of f The beep sounds when the shutter button or another button is pr essed during a menu operation. 1 Display the Setup menu (p. 63). 2 Use the and buttons to select [Beep]. 3 Use the and buttons to select [On] or [Of f]. • The warning beep is not controlled by the beep setting. Adjusting the LCD Monitor Brightness The LCD [...]

65 Camera Settings Setting the Date/Time 1 Display the Setup menu (p. 63). 2 Use the and buttons to select [Date/T ime]. Press the SET button. 3 Set the date and time. • The factor y default date style may differ between r egions. • Use the and buttons to select a field, such as the year , month, day , hour , minute and date format. • Use the[...]

66 • Please note that formatting a CF card erases all the data on the card, including protected images, sound files and print settings. • When a non-Canon brand CF card is malfunctioning, reformatting it may solve the problem. Setting the Language 1 Display the Setup menu (p. 63). 2 Use the and buttons to select [Language]. Press the SET button[...]

67 Appendices Replacing the Button Battery If the date/time settings menu displays when the camera power is turned on, the button battery has lost its charge and the date/time setting has been lost. Pur chase a generic CR2016 lithium button battery and r eplace it using the following procedur es. • A button battery is installed in the camera when[...]

68 Camera Maintenance Follow the pr ocedures below to clean the camera body , lens, optical viewfinder and LCD monitor when they become dirty . • Never use thinners, benzene, synthetic cleansers or water to clean the equipment. These substances may distort or damage the equipment. Camera Body Gently wipe dirt of f the camera body with a soft clot[...]

69 Appendices T roubleshooting Problem Cause(s) Solution(s) • Ensure that the battery cover is firmly closed. • Insert the 2CR5 lithium battery so that its terminals touch the bottom of the battery chamber . • Insert a fully charged battery pack. • Replace the batter y . • Use an approved AC power source. • Use a fully charged Battery P[...]

70 Pr oblem Cause(s) Solution(s) • Insert CF card until the ejector button is fully extended and close the slot cover . • Replace the CF car d. • Download and then erase all or some of the car d’ s images to create space. • Reformat the CF car d. • If reformatting does not work, the logic circuits of the CF car d may be faulty or damage[...]

71 Appendices Problem Cause(s) Solution(s) • Fully charge and discharge the battery pack several times to restor e its capacity . • This battery pack can no longer be used. Replace it with a new one. • Seat the battery pack mor e fir mly in the charger . • Check the AC power cord connection between the electrical outlet and the charger . ?[...]

72 Pr oblem Cause(s) Solution(s) • Set the camera to a mode other than Slow Shutter • Change the flash setting to Flash On. • Adjust the exposur e compensation to a positive (+) setting. • Use the spot exposure metering method or the AE lock function to r ecord. • Reset the white balance mode. • Remain within the range of 6.7 in. to 10.[...]

73 Appendices List of Message Codes The following codes may appear in the display panel. Pb: Image playback. PC: Camera connected in PC mode to a computer . : 2CR5 lithium battery or Battery Pack NB-5H charge is spent. Please r eplace the battery . (This message may appear at low temperatures and other conditions even for a new 2CR5 lithium battery[...]

74 List of Messages The following messages may appear in the display panel. Busy ...: Image is r ecording on CF card or CF car d is being read in play mode. No CF card: Y ou attempted to view or shoot an image without a CF car d installed. Cannot Record!: Y ou attempted to shoot an image without a CF car d installed. CF card error!: CF car d has ex[...]

75 Appendices Incompatible JPEG format: Y ou attempted to view an incompatible JPEG file. Corrupted Data: Y ou attempted to view an image with corrupted data Cannot magnify!: Y ou attempted to magnify an image that was photographed with another camera, recor ded in a dif ferent format, or edited on a computer . Cannot rotate: Y ou attempted to rota[...]

76 List of Functions The functions available in each r ecording mode ar e listed below . Recor ding Functions Image Quality Settings The shaded areas indicate functions that r eset to the default setting when the Mode Dial is turned or the camera is powered down. (1) Default values for Fast Shutter and Black and White modes. (2) Default value for N[...]

77 Appendices Specifications Lens: Digital T eleconverter: Focusing Range: Image Sensor: Approx. 2.11 million-pixel (total), 1/2-inch charge coupled device (effective pixels: appr ox. 2.02 million) 6.3 - 12.6 mm (35 mm film equivalent: 35 to 70 mm) / F2.8 (wide angle) - F4.0 (telephoto) Standard : 18 in. (46 cm) to infinity ; Macro : 4.7 - 18 in. ([...]

78 Recording Media: CompactFlash™ card (T ype I or T ype II) Image Format: Design rule for Camera File System (Images / Thumbnails : JPEG) Compression: NORMAL / FINE / SUPER FINE Sensitivity: Equivalent to ISO 100 / 200 / 400 (ISO 200 / 400 for gain up setting) Operating T emperatur es: 32 ° - 104 ° F (0 ° - 40 ° C) Operating Humidity: 10 - 9[...]

79 Appendices Compact Power Adaptor CA-PS100/100E (sold separately in some r egions) Input V oltage: AC 100 to 240 V (50/60 Hz) Rated Output: Charging: 7.2 V , 0.65 A Camera power supply: 6.5 V , 1.5 A Input Rating: Charging: 23 to 26 V A (100 to 240 V) Camera power supply: 18 to 20 V A (100 to 240 V) Operating T emperature: 32˚ to 104˚ F (0˚ to[...]

80 Index Symbols 2CR5 Lithium Battery 17 A AC Adapter 19 AE Lock 45 Auto Mode 30 B Batteries AC Adapter 19 Battery Cover Lock 12 Charging 16 Installing 17 Performance 19 Battery Pack 16, 17 Beep 64 Black and White 36 Built-in Memory Display 28 Button Battery 67 Buttons 13 C Camera Blur Warning Icon 29 Camera Settings 63 CF Card 20 CF Card Slot Cove[...]

81 Appendices Menus Play 63 Recording 63 Setup 63 Mode Dial 13, 14 Modes Auto 30 Image 36 Macro 42 Manual 35 Stitch Assist 37 Multi Image Replay 33, 51 N Night Scene 36 O Omni Selector 13 Operation Panel 13 Optical Viewfinder 12, 27 P Play Menu 63 Play Mode 50 Power On/Off 26 Power Save 26 Print Settings 55 Selecting Images 55 Date/T ime 57 File Nu[...]

82 Canon Customer Support Canon Inc. 30-2 Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan NOR TH AMERICA Canon U.S.A., Inc. Canon Customer Care Center Phone (US): 1-800-828-4040 (A vailable Mon. - Fri., 9 AM to 8 PM Eastern Time) Canon Canada Inc. Phone (Canada): 1-800-OK-CANON (1-800-652-2666) (24 hours/day , 7 days/week) EUROPE Europe, Afric[...]

83 Appendices Canon Eur o-Photo GmbH Customer-Support: (02154) 495-610 Info-Desk: (02154) 495-444 Fax: (02154) 495-333 Canon Italia S.p.A. Pronto Canon : 02 8249 2000 BBS : 02 8249 2099 Canon Belgium N.V . / S.A. Helpdesk: 0900-10627 T el.: (02) 722.04.11 Fax: (02) 721.32.74 Canon Luxembourg S.A. T el.: (352) 48 47 961 Fax: (352) 48 47 96232 Canon [...]

84 OCEANIA Canon Australia Pty . Ltd. Info-Line: (02) 9805 2864 Canon New Zealand Ltd. Info-Line: 0900-522666 ASIA Canon Singapor e Pte. Ltd. 79 Anson Road, #09-01 / 06, Singapore 079906 Phone: (65) 532 4400 Fax: (65) 221 7577 Canon Hongkong Co., Ltd. 9/F , The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong Phone: 852-2739-0802 Fax: 85[...]

H-IE-031-V1 0100CH4.2 © 2000 CANON INC. PRINTED IN JAP AN[...]