Casio MO0602-EA инструкция обслуживания

Operation Guide 3043 1 MO0602-EA Getting Acquainted Congratulations upon y our selection of this CASIO watch. T o get the most out of your purchase, be sure to read this man ual carefully . Applications The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude. Measured v alues are then shown on the display[...]

Operation Guide 3043 2 Radio-controlled Atomic Timekeeping This watch receives a time calibr ation signal and updates its time setting accordingly . • This watch is designed to pic k up the time calibration signal transmitted in Germany (Mainflingen), England (Rugby), and the United States (F ort Collins) and the time calibration signals transmit[...]

Operation Guide 3043 3 • The watch receiv es the calibration signal f or two to se ven minutes e v eryday when the time in the Timekeeping Mode reaches each of the calibr ation times. Do not perform any button operation within se ven min utes bef ore or after any one of the calibration times . Doing so can interf ere with correct calibration. •[...]

Operation Guide 3043 4 To take a direction reading 1. While the watch is in the Digital Compass Mode, place it on a flat surf ace, or if y ou are wearing the watch, mak e sure that your wrist is horizontal (in relation to the horizon). 2. P oint the 12 o ’ clock position of the w atch in the direction you want to measure . 3. Press A to start a D[...]

Operation Guide 3043 5 To turn display of the barometric pressure differential pointer on and off 1. In the Barometer/Thermometer Mode, hold down E until SET appears in the upper display area. 2. Release E , and wait f or four or fiv e more seconds until either OFF or the current reference temper ature value (if set) starts to flash. This is the se[...]

Operation Guide 3043 6 Current Session Record The Current Session Record contains the data described below . The contents of this record are updated at regular intervals while a sav e session is in progress. • The maximum total ascent and total descent v alue is 99,995 meters (or 99,980 f eet). Each value re v erts to zero after the maximum is re[...]

Operation Guide 3043 7 Altitude Alarm The altitude alarm sounds for about five seconds when the current altitude matches a preset value during an altitude measurement operation. Y ou can press any button to stop the alarm after it starts to sound. The altitude alarm sounds only while the Altimeter Mode ’ s Altitude Screen is on the display . It d[...]

Operation Guide 3043 8 • When the currently selected time zone is one that includes mostly ocean, a v alue indicating the zone ’ s Greenwich Mean Time diff erential appears in place of a city code. • If the current time shown f or a city is wrong, check y our Home City time settings and make the necessary changes. To toggle a city code time b[...]

Operation Guide 3043 9 To set an alarm time 1. In the Alarm Mode, use C and A to scroll through the alarm screens until the one whose time you want to set is displa y ed. 2. Hold down E until the hour setting of the alarm time start to flash, which indicates the setting screen. • This automatically turns on the alar m. 3. Press D to move the flas[...]

Operation Guide 3043 10 Question: How does the altimeter work? Answer: Generally , air pressure and temperature decrease as altitude increases. This watch bases its altitude measurements on International Standard Atmosphere (ISA) values stipulated by the International Civil Aviation Organization (ICA O). These values define relationships between al[...]

Operation Guide 3043 11 Charging Guide After a full charge, timek eeping remains enabled f or up to about fiv e months. • The follo wing table shows the amount of time the w atch needs to be exposed to light each da y in order to gener ate enough power f or normal daily operations. • Since these are the specs, we can include all the technical d[...]

Operation Guide 3043 12 Reference This section contains more detailed and technical information about watch operation. It also contains impor tant precautions and notes about the various features and functions of this w atch. Auto Return Features • The watch returns to the Timekeeping Mode automatically if y ou do not perform any b utton operatio[...]

Operation Guide 3043 13 Timekeeping • Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased b y 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes . • With the 12-hour format, the P (PM) indicator appears on the displa y f or times in the range of no[...]

Operation Guide 3043 14 4. Press A to start the calibration operation. • --- is shown on the displa y while calibration is being perf ormed. When calibration is successful, the displa y will show O K and the Digital Compass Mode (with 0 ° shown as the angle v alue). • If --- appears and then changes to ERR (error) on the calibration screen, it[...]