CDA SC620 инструкция обслуживания

Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu SC620 Single Oven Manual for Installation, Use and Maintenance[...]

2 Important This appliance must only be used for the purpose for which it is intended, i.e. domestic cooking. Any other use could be dangerous and may lead to premature failure of the appliance. The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CD A reserv[...]

3 Appliance Model Serial Number CE Declarations of Conformity: This oven has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/EEC (L ow voltage) and requirements of EMC Directive 2004/108/EEC. This appliance has been manufactured to the strictest standards and complies with all applicable legis[...]

4 Important • R ead the user instructions carefully before using the oven for the first time. • Follow the instructions for first use of the oven. • Clean the oven regularly . • R emove spills as soon as they occur . • Always use oven gloves when removing shelves and trays from the ovens. • Do not allow children near the oven when in [...]

5 • Do not attempt to repair the internal workings of your oven. • Do not cover the oven floor with aluminium foil. First Use of the Oven First use • The metal casing of this appliance has been coated with a preservative to protect it during transport and storage. This should be removed during installation by using a non-abrasive stainless s[...]

6 Please note: • This oven has been fitted with a cooling fan to achieve maximum eciency and to maintain low surface temperatures. The cooling fan will switch on automatically when the oven switches on. It is normal for the cooling fan to run for an hour or more after use, depending on the duration, temperature and type of cooking programme u[...]

7 Defrost Using the fan only this oven function circulates the air around the oven cavity , speeding up the natural defrost process (1kg takes appro ximately one hour , depending on the type of food). Fan Oven Using the circular element and the fan with a temperature between 50C and 250C, this cooking function blows the air into and around th[...]

8 For each grill function please note: • Always grill with the oven door closed. • Put the grill pan as close to the grill as possible. • Do not grill for more than 30 minutes at a time. • Preheat the grill for up to five minutes with the oven door closed. W arming Oven Using heat produced only by the bottom element, this natural heat is p[...]

9 Programming the Oven Please note: • The alert beep will cut o after two minutes if it is not switched o manually . Setting the clock The clock is preset to 12:00 , and will revert to this after a power failure. When the current time indicator is flashing, touch or . When the correct time is shown on the display , the clock will set after[...]

10 T o set the minute minder: • T ouch repeatedly until the minute minder indicator flashes. • Then touch or to select the required duration for the minute minder . When the correct duration shows on the display , either touch or wait for appro ximately five seconds. The minute minder indicator will remain lit to confirm the minute minder is[...]

11 Automatic cooking: The main oven can be set to switch on and o automatically at preset times up to a maximum of 10 hours. T o set an automatic cooking programme, follow the steps for setting a semi-automatic programme above, and then: • T ouch until the end of cooking time indicator flashes. • Then touch or to select the required end of [...]

12 Care and Maintenance IMPORT ANT Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance. The oven exterior As the oven has a stainless steel or enamel surface, you [...]

13 IMPORT ANT : • Steam cleaners must not be used when cleaning this appliance . • Once care and maintenance is complete, ensure that all parts are correctly replaced before using the oven.[...]

14 Changing the Oven Lamp Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply . If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance. Changing the bulb (fig. 2) Unscrew the protective cover . W e recommend that you wa[...]

15 IMPORT ANT Never replace the bulb with bare hands as contamination from your fingers can cause premature failure. Always use a clean cloth or gloves. Please note: The bulb replacement is not covered by your guarantee. R eversing the Door This oven can be converted from left hand hinged to right hand hinged if necessary . Door reversal should be[...]

16 R emoving the Oven Door Inner Glass The oven door inner glass can be removed to facilitate cleaning. • Fully open the door . • R emove the four A fixing screws from the door hinge. • R est the door on a soft surface. • Use a screwdriver to prise the inner glass from the frame as shown in fig 4. • Move the inner glass towards the hing[...]

17 Installation Important If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not installed as it could restrict ventilation. Ensure that air can flow freely around the housing area. If the oven is being installed into a fully enclosed built-under oven housing unit it may be nece[...]

18 Dimensions Oven Housing Height (mm) 595 600 Width (mm) 595 560 Depth (mm) 563.5 560 (min) fig. 5 600 560 595 595 595 542 554 24 40 560 600 to the housing by fitting screws into these holes. R emember the housing should not be free standing but be secured to the wall and/or adjacent fittings. How to install your oven Y ou will need the followi[...]

19 Electricity Supply to Y our Oven W arning! this appliance must be earthed. This appliance must be connected by a competent person, using fix ed wiring via a double pole switched fused spur outlet, protected by a 13A fuse. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will [...]

20 NO TES:[...]

21 NO TES:[...]

22 NO TES:[...]

23 Attribute Symbol Value Units Model  Identification SC620 Mass  of  the  appliance M 30 kg Number  of  cavities 1 Heat  source  per  cavity  (electricity  or  gas) Electricity Volume  per  cavity V 56 L Energy  consumption  (electricity)  required  to  heat  a  standardised  load ?[...]

Please contact our Customer Care Department for Service on the details below . Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www. cda.eu[...]