Chevrolet 2010 Express инструкция обслуживания

2010 Chevrolet Express Owner Manual M In Brief ................ .......... ........... ....... 1 - 1 I n s t r u m e n t P a n e l ... .............................. 1 - 2 Initial Drive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 V ehicle Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Performance and Maintenance . . . . . . . . . . . . . . . . . . 1-17 Seats and Restraint System ...................... 2 - 1 Head Restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 F r o n t S e a t s ...................... ................. 2 - 2 Rear Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

2010 Chevrolet Express Owner Manual M Appearance Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-98 V ehicle Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-105 Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-106 Capacities and Specifications . . . . . . . . . . . . . . . . . . 6-1 13 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Customer Assistance Information .. . ............ 8 - 1 Customer Assistance and Information . . . . . . . . . . . . 8-2 Reporting Safety Defects . . . . . . . . . . . . . . . . . .[...]

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET , the CHEVROLET Emblem, and the name EXPRESS are registered trademarks of General Motors. This manual describes features that may or may not be on your specific vehicle either because they are options that you did not purchase or due to changes subsequent to the printing of this owner manual. Please refer to the purchase documentation relating to your specific vehicle to confirm each of the features found on your vehicle. For vehicles first sold in Canada, substitute the name “ General Motors of Canada Limited ” for Chevrolet Motor Division wherever it appears in this manual. If the vehicle has the DURAMAX ® Diesel engine, refer to the DURAMA[...]

Safety W arnings and Symbols W arning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Danger indicates a hazard with a high level of risk which will result in serious injury or death. W arning or Caution indicates a hazard that could result in injury or death. { W ARNING: These mean there is something that could hurt you or other people. Notice: This means there is something that could result in property or vehicle damage. This would not be covered by the vehicle's warranty . A circle with a slash through it is a safety symbol which means “ Do Not, ” “ Do not do this, ” or “ Do not let this happen. ” V ehicle Symbo[...]

V ehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. 9 : Airbag Readiness Light # : Air Conditioning ! : Antilock Brake System (ABS) g : Audio Steering Wheel Controls or OnStar ® $ : Brake System Warning Light " : Charging System I : Cruise Control B : Engine Coolant T emperature O : Exterior Lamps # : Fog Lamps . : Fuel Gauge + : Fuses i : Headlamp High/Low-Beam Changer j : LA TCH System Child Restraints * : Malfunction Indicator Lamp : : Oil Pressure } : Power / : Remote V ehicle Start > : Safety Belt Reminders 7 : T ire Pressure Monitor _ : T ow/Haul Mode F : T raction C[...]

2 NOTES vi[...]

Section 1 In Brief Instrument Panel ................................... 1-2 Initial Drive Information .. ....... .................. 1-4 Remote Keyless Entry (RKE) System . . . . . . . . . . . 1-4 Remote V ehicle Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 W i n d o w s ........................................ 1 - 6 Seat Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Safety Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Airbag On-Off Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Sensing System for [...]

Instrument Panel 1-2[...]

A. Outlet Adjustment on page 4 ‑ 17 . B. Driver Information Center (DIC) on page 4 ‑ 37 . C. T urn Signal/Multifunction Lever on page 4 ‑ 4 . D. Hazard Warning Flashers on page 4 ‑ 3 . E. Instrument Panel Cluster on page 4 ‑ 21 . F . Shift Lever . See Starting the Engine on page 3 ‑ 25 . G. Climate Control System on page 4 ‑ 15 . H. Audio System(s) on page 4 ‑ 59 . I. Exterior Lamps on page 4 ‑ 9 . J. Instrument Panel Brightness on page 4 ‑ 1 1 . K. Cruise Control on page 4 ‑ 6 . Fast Idle System (If Equipped). See Duramax Diesel Manual for more information. L. Tilt Wheel on page 4 ‑ 3 . M. Horn on page 4 ‑ 3 . N. Audio Steering Wheel Controls on page 4 ‑ 79 . O. [...]

Initial Drive Information This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can be found later in this owner manual. Remote Keyless Entry (RKE) System The RKE transmitter is used to remotely lock and unlock the doors from up to 20 m (65 feet) away from the vehicle. Press K to unlock the driver door . Press K again within five seconds to unlock all remaining doors. Press j to unlock only the cargo doors. Press Q to lock all doors. Lock and unlock feedback can be personalized. Press L and release to locate the vehicle. Press L and hold for more than two [...]

Starting the V ehicle 1. Aim the RKE transmitter at the vehicle. 2. Press Q . 3. Immediately after completing Step 2, press and hold / until the turn signal lamps flash. When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running. The doors will be locked and the climate control system may come on. The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once. Canceling a Remote Start T o cancel a remote start: . Aim the RKE transmitter at the vehicle and press and hold / until the parking lamps turn off. . T urn on the hazard warning flashers. . T urn the ignition on and then[...]

Windows Manual Windows Operate the manual windows by turning the hand crank on each door to raise or lower the side door windows. See Manual Windows on page 3 ‑ 16 . Power Windows If the vehicle has power windows, the controls are located on each of the side doors. The driver door also has a control to operate the front passenger window . Press or pull up on the switch to lower or raise the window . See Power Windows on page 3 ‑ 17 . Seat Adjustment Manual Seats 1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar . T ry to move the seat to be sure the seat is locked in place. See Manual Seats on page 2 ‑ 2 . 1-6[...]

Power Seats If the vehicle has front power seat(s), the controls are located at the front center of the seat cushion. Adjust the seat by moving the center knob up, down, right or left. Raise and lower the front or rear of the seat cushion by moving the right or left lever up or down. See Power Seat on page 2 ‑ 3 . Reclining Seatbacks T o recline the seatback: 1. Lift the recline lever on the inboard side of the seats. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked. See Reclining Seatbacks on page 2 ‑ 4 . 1-7[...]

Safety Belt Refer to the following sections for important information on how to use safety belts properly . . Safety Belts: They Are for Everyone on page 2 ‑ 10 . . How to Wear Safety Belts Properly on page 2 ‑ 15 . . Lap-Shoulder Belt on page 2 ‑ 24 . . Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 41 . Airbag On-Off Switch If the instrument panel has one of the switches pictured in the following illustrations, the vehicle has an airbag on-off switch that you can use to manually turn on or of f the right front passenger airbag. United States Canada See Airbag Off Switch on page 2 ‑ 69 for important information. 1-8[...]

Sensing System for Passenger Airbag The passenger sensing system, if equipped, will turn off the right front passenger frontal airbag under certain conditions. The driver airbag and roof ‐ rail airbags, if equipped, are not affected by this. If the vehicle has a passenger sensing system, the passenger airbag status indicator will be visible on the instrument panel when the vehicle is started. United States Canada See Passenger Sensing System on page 2 ‑ 73 for important information. Mirror Adjustment Exterior Mirrors V ehicles with outside manual mirrors can be adjusted by moving the mirror up and down or left to right so you can see a little of the side of your vehicle, and have a clear[...]

V ehicles with towing mirrors can be adjusted manually for a clear view of the objects behind you. Manually fold the mirrors inward to prevent damage when going through an automatic car wash. T o fold, pull the mirror toward the vehicle. Push the mirror outward, to return it to the original position. Interior Mirror Hold the inside rearview mirror in the center to move it for a clearer view behind the vehicle. Adjust the mirror to avoid glare from the headlamps behind. Push the tab, located at the base of the mirror , forward for daytime use and pull it for nighttime use. See Manual Rearview Mirror on page 3 ‑ 44 . Steering Wheel Adjustment For vehicles with a tilt steering wheel, the leve[...]

Interior Lighting Dome Lamp The dome lamps come on when any door is opened. They turn off after all the doors are closed. T o manually turn on the dome lamps, turn the instrument panel brightness knob, located on the instrument panel to the left of the steering column, clockwise to the farthest position. In this position, the dome lamps remain on whether a door is opened or closed. E : The dome lamp override button is located next to the exterior lamps control. Press the button in and the dome lamps remain off when a door is opened. Press the button again to return it to the extended position so that the dome lamps come on when a door is opened. Reading Lamps For vehicles with reading lamps,[...]

AUTO: Automatically turns on the headlamps, parking lamps, taillamps, instrument panel lights, and license plate lamps. ; : T urns on the parking lamps, taillamps, instrument panel lights, and license plate lamps. 2 : T urns on the headlamps, parking lamps, taillamps, instrument panel lights, and license plate lamps. For more information, see: . Exterior Lamps on page 4 ‑ 9 . . Headlamps on Reminder on page 4 ‑ 10 . . Daytime Running Lamps (DRL) on page 4 ‑ 10 . . Automatic Headlamp System on page 4 ‑ 1 1 . Windshield Wiper/W asher The lever is located on the left side of the steering column. 8 : Use for a single wiping cycle. 6 : Turn the band to adjust the delay time between wipes.[...]

9 : T urns the wipers off. L : Push the paddle on top of the multifunction lever to spray washer fluid on the windshield. See Windshield Wipers on page 4 ‑ 5 and Windshield Washer on page 4 ‑ 6 . Climate Controls The vehicle's heating, cooling, and ventilation can be controlled with these systems. V ehicles Without Air Conditioning A. Fan Control B. T emperature Control C. Air Delivery Mode Control V ehicles With Air Conditioning A. Fan Control B. T emperature Control C. Air Delivery Mode Control D. Rear Window Defogger See Climate Control System on page 4 ‑ 15 . See Rear Heating System on page 4 ‑ 18 (If Equipped) or Rear Air Conditioning and Heating System on page 4 ‑ 18 (If[...]

V ehicle Features Radio(s) Radio with CD (MP3) O : Press to turn the system on and off. Turn to increase or decrease the volume. BAND: Press to choose between FM and AM. f : Select radio stations. © ¨ : Seek or scan stations. 4 : Press to display additional text information related to the current FM-RDS station or MP3 song. A choice of additional information such as: Channel, Song, Artist, and CA T (category) can display . Continue pressing to highlight the desired label, or press the softkey located under any one of the tabs and the information about that tab displays. For more information about these and other radio features, see Audio System(s) on page 4 ‑ 59 . Storing a Favorite Stat[...]

Setting the Clock T o set the time and date for the Radio with CD (MP3): 1. Press H and the HR, MIN, MM, DD, YYYY (hour , minute, month, day , and year) displays. 2. Press the pushbutton located below any one of the tabs that you want to change. 3. Increase or decrease the time or date, depending on the radio, by pressing the © SEEK ¨ arrows, s REV/FWD buttons or by turning f clockwise or counterclockwise. For detailed instructions on setting the clock for your specific audio system, see Setting the Clock on page 4 ‑ 61 . Portable Audio Devices This vehicle may have an auxiliary input jack, located on the audio faceplate. External devices such as iPod ® , MP3 players, etc. can be conn[...]

Cruise Control The cruise control buttons are located on the left side of the steering wheel. J : On/Off. RES+: Press to resume or accelerate speed. SET − : Press to set or decrease speed. [ : Press to cancel cruise control without erasing the set speed from memory . For more information, see Cruise Control on page 4 ‑ 6 . Power Outlets The accessory power outlets can be used to connect auxiliary electrical equipment, such as a cellular phone. The vehicle may have two accessory power outlets located on the instrument panel. T o use the accessory power outlet lift the cover . See Accessory Power Outlet(s) on page 4 ‑ 14 and Ashtray(s) and Cigarette Lighter on page 4 ‑ 15 (If Equipped)[...]

Performance and Maintenance StabiliT rak ® The vehicle may have a traction control system that limits wheel spin and the StabiliT rak system that assists with directional control of the vehicle in difficult driving conditions. Both systems turn on automatically every time the vehicle is started. . T o turn off both traction control and Electronic Stability Control, press and hold d until d illuminates and the appropriate DIC message displays. See DIC Warnings and Messages on page 4 ‑ 44 . . Press and release the button again to turn on both systems. For more information, see StabiliT rak ® System on page 5 ‑ 5 . Tire Pressure Monitor This vehicle may have a T ire Pressure Monitor Syste[...]

Y ou may notice during cooler conditions that the low tire pressure warning light will appear when the vehicle is first started and then turn off as you drive. This may be an early indicator that your tire pressures are getting low and the tires need to be inflated to the proper pressure. Note: The T ire Pressure Monitor can alert you about low tire pressure, but it does not replace normal monthly tire maintenance. It is the driver ’ s responsibility to maintain correct tire pressures. See Tire Pressure Monitor System on page 6 ‑ 67 and Tire Pressure Monitor Operation on page 6 ‑ 68 . Engine Oil Life System The engine oil life system calculates engine oil life based on vehicle use and [...]

Driving for Better Fuel Economy Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. . Avoid fast starts and accelerate smoothly . . Brake gradually and avoid abrupt stops. . Avoid idling the engine for long periods of time. . When road and weather conditions are appropriate, use cruise control, if equipped. . Always follow posted speed limits or drive more slowly when conditions require. . Keep vehicle tires properly inflated. . Combine several trips into a single trip. . Replace the vehicle's tires with the same TPC Spec number molded into the tire's sidewall near the size. . Follow recommended scheduled maintenance. Roadside A[...]

2 NOTES 1-20[...]

Section 2 Seats and Restraint System Head Restraints ............................... ..... 2-2 Front Seats ......................................... 2-2 Manual Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 P o w e r S e a t .................. ................... 2 - 3 Reclining Seatbacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Rear Seats .................. ................... .... 2-6 Rear Seat Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Safety Belts ....... .............. ............... ... 2-10 Safety Belts: They Are for Everyone . . . . . . . . . . . 2-10 How to Wear Safety Belts Properly . . . . . . . . . . [...]

Head Restraints On vehicles with factory installed seats, the front seats have built-in head restraints that are not adjustable in the outboard seating positions. Front Seats Manual Seats { W ARNING: Y ou can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving. If the vehicle has a manual seat, it can be moved forward or rearward. 1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar . T ry to move the seat with your body to be sur[...]

Power Seat If the vehicle has front power seat(s), the controls are located at the front center of the seat cushion. T o raise or lower the seat, move the center knob up or down. T o move the seat forward or rearward, move the center knob toward the right or left. T o raise or lower the front of the seat cushion, move the right lever up or down. T o raise or lower the rear of the seat cushion, move the left lever up or down. 2-3[...]

Reclining Seatbacks { W ARNING: Y ou can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver's seat only when the vehicle is not moving. { W ARNING: If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. The seats have manual reclining seatbacks. The lever used to operate them is located on the inboard side of the seats. T o recline the seatback: 1. Lift the recline lever [...]

T o return the seatback to an upright position: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked. { W ARNING: Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body . Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries. The lap belt cannot do its job either . In a crash, the belt could go up over your abdomen. The belt forces would[...]

Rear Seats Rear Seat Operation Removing the Rear Seat Disconnect the quick release latch plates for the lap ‐ shoulder belts on the bench seat to be removed. 1. T o do this, press the tip of a key into the release hole of the safety belt buckle while pulling up on the safety belt. 2. Locate the pins. On a three passenger seat there are two pins located on the inboard sides of the rear seats. Three Passenger Seat Shown The driver side pin has a gray cap with a black “ L ” marked on it. 2-6[...]

Three Passenger Seat Shown The passenger side pin has a black cap with a white “ R ” marked on it. On a four passenger seat, each half of the seat has a set of pins. The driver side has a set marked “ L ” , and the passenger side has a set marked “ R ” . If the vehicle has floor mats, the pins will be located under a flap that has been cut into the mat. 3. Pull the pin handle up to disengage the pin from the retaining clip, then pull the pin out. 4. Repeat this procedure for the other pins. 5. Pull the seat rearward about 2 inches (5 cm) and then lift the seat from the floor rails. 6. Remove the seat from the vehicle. 7. For the first row rear seat, stow the safety belt latch by [...]

Replacing the Rear Seats { W ARNING: A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. { W ARNING: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising (Continued) W ARNING: (Continued) the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted. 1. Position the seat into the open slots in both rails. Push the seat forward in the rail, hooking both[...]

Three Passenger Seat Shown 4. Push the pin(s) marked “ R ” down until they are in the retaining clip. Three Passenger Seat Shown 5. Push the pin(s) marked “ L ” down until they are in the retaining clip. 6. If the vehicle has a floor mat, put the flap back to its original position. 7. Repeat this procedure for the other seat base. 8. Connect the quick-release latch plates for the lap-shoulder belts by inserting the latch plates into the buckles attached at the outboard positions of the bench seat. Do not twist the belt. 9. Check that all locking pins are locked into place before operating the vehicle. 2-9[...]

Safety Belts Safety Belts: They Are for Everyone This section of the manual describes how to use safety belts properly . It also describes some things not to do with safety belts. { W ARNING: Do not let anyone ride where a safety belt cannot be worn properly . In a crash, if you or your passenger(s) are not wearing safety belts, the injuries can be much worse. Y ou can hit things inside the vehicle harder or be ejected from the vehicle. Y ou and your passenger(s) can be seriously injured or killed. In the same crash, you might not be, if you are buckled up. Always fasten your safety belt, and check that your passenger(s) are restrained properly too. { W ARNING: It is extremely dangerous to r[...]

In most states and in all Canadian provinces, the law requires wearing safety belts. Here is why: Y ou never know if you will be in a crash. If you do have a crash, you do not know if it will be a serious one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away . Without safety belts, they could have been badly hurt or killed. After more than 40 years of safety belts in vehicles, the facts are clear . In most crashes buckling up does matter ... a lot! Why Safety Belts Work When you ride in or on anything, you go as fast as it goes[...]

Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. 2-12[...]

The person keeps going until stopped by something. In a real vehicle, it could be the windshield... or the instrument panel... 2-13[...]

or the safety belts! With safety belts, you slow down as the vehicle does. Y ou get more time to stop. Y ou stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt? A: Y ou could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. And you can unbuckle a safety belt, even if you are upside down. Q: If my vehicle has airbags, why should I have to wear safety belts? A: Airbags are supple[...]

Q: If I am a good driver , and I never drive far from home, why should I wear safety belts? A: Y ou may be an excellent driver , but if you are in a crash — even one that is not your fault — you and your passenger(s) can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone. How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different[...]

Sit up straight and always keep your feet on the floor in front of you. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash. 2-16[...]

Q: What is wrong with this? A: The shoulder belt is too loose. It will not give as much protection this way . { W ARNING: Y ou can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury . The shoulder belt should fit snugly against your body . 2-17[...]

Q: What is wrong with this? A: The lap belt is too loose. It will not give nearly as much protection this way . { W ARNING: Y ou can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs. 2-18[...]

Q: What is wrong with this? A: The belt is buckled in the wrong buckle. { W ARNING: Y ou can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you. 2-19[...]

Q: What is wrong with this? A: The belt is over an armrest. { W ARNING: Y ou can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests. 2-20[...]

Q: What is wrong with this? A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. { W ARNING: Y ou can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury . Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones. Y ou could also severely injure internal organs like your liver or spleen. The shoulder belt should go over the shoulder and across the chest. 2-21[...]

Q: What is wrong with this? A: The belt is behind the body . { W ARNING: Y ou can be seriously injured by not wearing the lap-shoulder belt properly . In a crash, you would not be restrained by the shoulder belt. Y our body could move too far forward increasing the chance of head and neck injury . Y ou might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest. 2-22[...]

Q: What is wrong with this? A: The belt is twisted across the body . { W ARNING: Y ou can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly , or ask your dealer/retailer to fix it. 2-23[...]

Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. If you are using a rear seating position with a detachable safety belt and the safety belt is not attached, see Rear Seat Operation on page 2 ‑ 6 for instruction on reconnecting the safety belt to the mini-buckle. The following instructions explain how to wear a lap-shoulder belt properly . 1. Adjust the seat, if the seat is adjustable, so you can sit up straight. T o see how , see “ Seats ” in the Index. 2. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly . If this happens, let the belt go back slig[...]

5. T o make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants. T o unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Slide the latch plate up the safety belt webbing when the safety belt is not in use. The latch plate should rest on the stitching on the safety belt, near the guide loop on the side wall. Before a door is closed, be sure the safety belt is out of the way . If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle. 2-25[...]

Shoulder Belt Height Adjuster The vehicle has a shoulder belt height adjuster for the driver and right front passenger positions. Adjust the height so that the shoulder portion of the belt is centered on the shoulder . The belt should be away from the face and neck, but not falling off of the shoulder . Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. T o move it down, pull on the center adjuster control labeled PULL. Y ou can move the height adjuster up just by pushing up on the shoulder belt guide. After the adjuster is set to the desired position, try to move it down without pushing in to make sure it has locked into position. Safety B[...]

Rear Safety Belt Comfort Guides This vehicle may have rear shoulder belt comfort guides. If not, they are available through your dealer/ retailer . The guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed and properly adjusted, the comfort guide positions the shoulder belt away from the neck and head. Here is how to install a comfort guide to the safety belt: 1. Locate the guide in a pocket on the side of the seatback. 2-27[...]

2. Place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top. 2-28[...]

{ W ARNING: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. 4. Buckle, position, and release the safety belt as described in previously in this section. Make sure that the shoulder belt crosses the shoulder . T o remove and store the comfort guide, squeeze the belt edges together so that the safety belt can be removed from the guide. Slide the guide into its storage pocket on the side of the seatback. 2-29[...]

Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy . The best way to protect the fetus is to protect the mother . When a safety belt is worn properly , it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly . Safety Belt Extender If the vehicle's safety belt will fasten around you, you should use [...]

Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle's safety belts. The manufacturer's instructions that come with the booster seat state the weight and height limitations for that booster . Use a booster seat with a lap-shoulder belt until the child passes the below fit test: . Sit all the way back on the seat. Do the knees bend at the seat edge? If yes, continue. If no, return to the booster seat. . Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder? If yes, continue. If no, try using the rear safety belt comfort guide. See “ Rear Safety Belt Comfort Guides ” under Lap-Shoulder Belt on page 2 ‑ 24 for[...]

Q: What is the proper way to wear safety belts? A: An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. This applies belt force to the child's pelvic bones in a crash. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash. Also see “ Rear Safety Belt Comfort Guides ” under Lap-Shoulder Belt on page 2 ‑ 24 . According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant res[...]

{ W ARNING: Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly . In a crash, the child would not be restrained by the shoulder belt. The child could move too far forward increasing the chance of head and neck injury . The child might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest. 2-33[...]

Infants and Y oung Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle. { W ARNING: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Never leave children unattended in a vehicle and never allow children to play with the safety belts. Airbags plus lap ‐ shoulder belts offer protection for ad[...]

{ W ARNING: Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child (Continued) W ARNING: (Continued) restraint in a rear seat. It is also better to secure a forward-facing child restraint in a rear seat. If you must secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. 2-35[...]

Q: What are the different types of add-on child restraints? A: Add-on child restraints, which are purchased by the vehicle's owner , are available in four basic types. Selection of a particular restraint should take into consideration not only the child's weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer&[...]

{ W ARNING: A young child's hip bones are still so small that the vehicle's regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child's abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure. This alone could cause serious or fatal injuries. T o reduce the risk of serious or fatal injuries during a crash, young children should always be secured in appropriate child restraints. Child Restraint Systems A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to[...]

A booster seat (C-D) is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window . Securing an Add-On Child Restraint in the V ehicle { W ARNING: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle's safety belt or LA TCH system, following the instructions that came with that child restraint and the instructions in this manual. T o help reduce the chance of injury , the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle[...]

When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer . Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle — even when no child is in it. Securing the Child Within the Child Restraint { W ARNING: A child can be seriously injured or killed in a crash if the child is not properly secured in the child restraint[...]

A label on the sun visor says, “ Never put a rear-facing child seat in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system or airbag switch has turned off the right front passenger frontal airbag, no [...]

Lower Anchors and T ethers for Children (LA TCH) The LA TCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier . The LA TCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LA TCH system. Make sure that a LA TCH-compatible child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. When installing a child restraint with a top tether , you must also use either the lower anchors or the safety belts [...]

T op T ether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash. Y our child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor . Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires t[...]

Lower Anchor and T op T ether Anchor Locations Second, Third and Fourth Row with Three Passenger Seat i (T op T ether Anchor): Seating positions with top tether anchors. j (Lower Anchor): Seating positions with two lower anchors. See the information following for installing a child restraint with a top tether in the second, third and fourth row center positions. Do not install three child restraints in the same row at the same time and never install two top tethers using the same top tether anchor . Front Passenger Position i (T op T ether Anchor): Seating positions with top tether anchors. 2-43[...]

The second, third and fourth row with three passenger seats have exposed metal lower anchors located in the crease between the seatback and the seat cushion. Second, Third and Fourth Row with Three Passenger Seat — Passenger V an There are two top tether anchors in the second, third and fourth rows. T o install a child restraint in the rear driver side seating positions, use anchor point (A). T o install a child restraint in the rear passenger side seating positions, use anchor point (B). T o install a child restraint in the rear center seating positions, use anchor point (B). Never install two top tethers using the same top tether anchor . Front Passenger Position There is a top tether an[...]

Securing a Child Restraint Designed for the LA TCH System { W ARNING: If a LA TCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly . In a crash, the child could be seriously injured or killed. Install a LA TCH-type child restraint properly using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with the child restraint and the instructions in this manual. { W ARNING: Do not attach more than one child restraint to a single anchor . Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a [...]

{ W ARNING: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Buckle any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been installed. Notice: Do not let the LA TCH attachments rub against the vehicle ’ s safety belts. This may damage these parts. If necessary , move buckled safety belts to avoid rubbing the LA TCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and r[...]

2. 3. Route and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using does not have a headrest or head restraint and you are using a single tether , route the tether over the seatback. If the position you are using does not have a headrest or head restraint and you are using a dual tether , route the tether over the seatback. If the position you are using has an integrated headrest or head restraint and you are using a dual tether , route the tether around the headrest or head restraint. 2-47[...]

If the position you are using has an integrated headrest or head restraint and you are using a single tether , route the tether over the headrest or head restraint. 3. Push and pull the child restraint in different directions to be sure it is secure. Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LA TCH system, see Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 41 for how and where to install the child restraint using LA TCH. If a child restraint is secured in the vehicle using[...]

In Canada, the law requires that forward-facing child restraints have a top tether , and that the tether be attached. If the child restraint does not have the LA TCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say . If more than one child restraint needs to be installed in the rear seat, be sure to read Where to Put the Restraint on page 2 ‑ 39 . 1. Put the child restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the r[...]

4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 5. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor . When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. 2-50[...]

6. If the child restraint has a top tether , follow the child restraint manufacturer's instructions regarding the use of the top tether . See Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 41 for more information. 7. Push and pull the child restraint in different directions to be sure it is secure. T o remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position. If the top tether is attached to a top tether anchor , disconnect it. Securing a Child Restraint in the Right Front Seat Position (With Passenger Sensing System) This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where t[...]

A label on the sun visor says, “ Never put a rear-facing child seat in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. Even if the passenger sensing system has turned off the right front passenger frontal airbag, no system is fail-sa[...]

In Canada, the law requires that forward-facing child restraints have a top tether , and that the tether be attached. Y ou will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the right front passenger frontal airbag, the off indicator on the passenger airbag status indicator should light and stay lit when the vehicle is started. See Passenger Airbag Status Indicator on page 4 ‑ 25 . 2. Put the child restraint on the seat. 3. Pick up the latch plate, and run [...]

5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor . When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. 2-54[...]

7. If the vehicle does not have a rear seat and the child restraint has a top tether , follow the child restraint manufacturer's instructions regarding the use of the top tether . See Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 41 for more information. 8. Push and pull the child restraint in different directions to be sure it is secure. If the airbag is off, the off indicator in the passenger airbag status indicator will come on and stay on when the vehicle is started. If the child restraint has been installed and the on indicator is lit, see “ If the On Indicator is Lit for a Child Restraint ” under Passenger Sensing System on page 2 ‑ 73 for more information. [...]

A label on the sun visor says, “ Never put a rear-facing child seat in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. Even if the airbag switch has turned off the right front passenger frontal airbag, no system is fail-safe. No one [...]

Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. In Canada, the law requires that forward-facing child restraints have a top tether , and that the tether be attached. Y ou will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. If you have no other choice but to install a rear-facing child restraint in this seat, make sure the [...]

5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. 6. T o tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor . When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt. 2-58[...]

7. If the vehicle does not have a rear seat and the child restraint has a top tether , follow the child restraint manufacturer's instructions regarding the use of the top tether . See Lower Anchors and T ethers for Children (LA TCH) on page 2 ‑ 41 for more information. 8. Push and pull the child restraint in different directions to be sure it is secure. T o remove the child restraint, unbuckle the vehicle safety belt and let it return to the stowed position. If the top tether is attached to a top tether anchor , disconnect it. If you turned the airbag off with the switch, turn on the right front passenger airbag when you remove the child restraint from the vehicle unless the person wh[...]

. A roof-rail airbag for the driver , passenger seated directly behind the driver , and the third row outboard passenger position (passenger van equipped with a sliding or hinged door). . A roof-rail airbag for the right front passenger , passenger seated directly behind the right front passenger , and the third row outboard passenger position (passenger van equipped with a hinged door). All of the airbags in the vehicle will have the word AIRBAG embossed in the trim or on an attached label near the deployment opening. For frontal airbags, the word AIRBAG will appear on the middle part of the steering wheel for the driver and on the instrument panel for the right front passenger . With roof-[...]

{ W ARNING: Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with airbags. The driver should sit as far back as possible while still maintaining control of the vehicle. Occupants should not lean on or sleep against the door or side windows in seating positions with roof-rail airbags. { W ARNING: Children who are up against, or very close to, an[...]

Where Are the Airbags? The driver frontal airbag is in the middle of the steering wheel. If the vehicle has one, the right front passenger airbag is in the instrument panel on the passenger side. 2-62[...]

Driver Side shown, Passenger Side similar If the vehicle is a cargo or passenger van with a sliding door and it has a roof-rail airbag for the driver and right front passenger position, the roof-rail airbags are in the ceiling above the side window . Driver Side shown, Passenger Side similar If the vehicle has roof-rail airbags for the driver , right front passenger , passengers behind the driver and right front passenger , and the third row outboard passengers, the roof-rail airbags are in the ceiling above the side windows. On the driver side of the vehicle, there is one single roof-rail airbag for either vehicles with a hinged door or a sliding door . 2-63[...]

For passenger vans with a sliding door , on the passenger side of the vehicle, you will have a separate roof-rail airbag for the passenger seated directly behind the right front passenger and the third row outboard passenger position. { W ARNING: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear . Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering. Never secure anything to the roof of a vehicle with roof-rail airbags by[...]

Frontal airbags may inflate at different crash speeds. For example: . If the vehicle hits a stationary object, the airbags could inflate at a different crash speed than if the vehicle hits a moving object. . If the vehicle hits an object that deforms, the airbags could inflate at a dif ferent crash speed than if the vehicle hits an object that does not deform. . If the vehicle hits a narrow object (like a pole), the airbags could inflate at a dif ferent crash speed than if the vehicle hits a wide object (like a wall). . If the vehicle goes into an object at an angle, the airbags could inflate at a dif ferent crash speed than if the vehicle goes straight into the object. Thresholds can also v[...]

The vehicle may or may not have roof-rail airbags. See Airbag System on page 2 ‑ 59 . Roof-rail airbags are intended to inflate in moderate to severe side crashes. In addition, these roof-rail airbags are intended to inflate during a rollover . Roof-rail airbags will inflate if the crash severity is above the system's designed threshold level. The threshold level can vary with specific vehicle design. Roof-rail airbags are not intended to inflate in frontal impacts, near-frontal impacts, or rear impacts. All roof-rail airbags will deploy when either side of the vehicle is struck. In any particular crash, no one can say whether an airbag should have inflated simply because of the damag[...]

How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. Airbags supplement the protection provided by safety belts. Frontal airbags distribute the force of the impact more evenly over the occupant's upper body , stopping the occupant more gradually . Roof-rail airbags distribute the force of the impact more evenly over the occupant's upper body . Rollover capable roof-rail airbags are designed to help contain the head and chest of occupants in the outboard seating positions in[...]

The parts of the airbag that come into contact with you may be warm, but not too hot to touch. There may be some smoke and dust coming from the vents in the deflated airbags. Airbag inflation does not prevent the driver from seeing out of the windshield or being able to steer the vehicle, nor does it prevent people from leaving the vehicle. { W ARNING: When an airbag inflates, there may be dust in the air . This dust could cause breathing problems for people with a history of asthma or other breathing trouble. T o avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but cannot get out of the vehicle after an airbag inflates, then g[...]

In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. . Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for the airbag system. If you do not get them, the airbag system will not be there to help protect you in another crash. A new system will include airbag modules and possibly other parts. The service manual for the vehicle covers the need to replace other parts. . The vehicle has a crash sensing and diagnostic module which records information after a crash. See V ehicle Data Recording and Privacy on page 8 ‑ 1[...]

This switch should only be turned to the off position if the person in the right front passenger position is a member of a passenger risk group identified by the national government as follows: Infant. An infant (less than 1 year old) must ride in the front seat because: . My vehicle has no rear seat; . My vehicle has a rear seat too small to accommodate a rear-facing infant seat; or . The infant has a medical condition which, according to the infant's physician, makes it necessary for the infant to ride in the front seat so that the driver can constantly monitor the child's condition. Child age 1 to 12. A child age 1 to 12 must ride in the front seat because: . My vehicle has no r[...]

{ W ARNING: If the right front passenger's airbag is turned off for a person who is not in a risk group identified by the national government, that person will not have the extra protection of an airbag. In a crash, the airbag will not be able to inflate and help protect the person sitting there. Do not turn off the passenger's airbag unless the person sitting there is in a risk group. United States Canada T o turn off the right front passenger frontal airbag, insert the ignition key into the switch, push in, and move the switch to the off position. 2-71[...]

The airbag off light will come on to let you know that the right front passenger airbag is off. The airbag of f light will stay on to remind you that the airbag is off. See Airbag Off Light on page 4 ‑ 24 . The airbag off light will stay on to remind you that the airbag is off. The right front passenger airbag will remain off until you turn it back on again. { W ARNING: If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. For example, the right front passenger airbag could inflate even though the airbag on-off switch is turned off. T o help avoid injury to yourself or others, have the vehicle serviced right away . See Airbag[...]

Passenger Sensing System If the instrument panel has one of the indicators pictured in the following illustrations, the vehicle has a passenger sensing system unless there is an airbag off switch located on the instrument panel. If there is an airbag off switch, the vehicle does not have a passenger sensing system. See Airbag Off Switch on page 2 ‑ 69 for more information. United States Canada The passenger airbag status indicator will be visible on the instrument panel when the vehicle is started. The words ON and OFF , or the symbol for on and off, will be visible during the system check. When the system check is complete, either the word ON or the word OFF , or the symbol for on or the [...]

A label on the sun visor says, “ Never put a rear-facing child seat in the front. ” This is because the risk to the rear-facing child is so great, if the airbag deploys. { W ARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position. (Continued) W ARNING: (Continued) Even if the passenger sensing system has turned off the right front passenger fr[...]

The passenger sensing system is designed to turn off the right front passenger frontal airbag if: . The right front passenger seat is unoccupied. . The system determines that an infant is present in a rear-facing infant seat. . The system determines that a small child is present in a child restraint. . The system determines that a small child is present in a booster seat. . A right front passenger takes his/her weight off of the seat for a period of time. . The right front passenger seat is occupied by a smaller person, such as a child who has outgrown child restraints. . Or , if there is a critical problem with the airbag system or the passenger sensing system. When the passenger sensing sy[...]

If the On Indicator is Lit for a Child Restraint If a child restraint has been installed and the on indicator is lit: 1. T urn the vehicle off. 2. Remove the child restraint from the vehicle. 3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers. 4. Reinstall the child restraint following the directions provided by the child restraint manufacturer and refer to Securing a Child Restraint in the Right Front Seat Position (With Passenger Sensing System) in the Index. 5. If, after reinstalling the child restraint and restarting the vehicle, the on indicator is still lit, turn the vehicle off. Then slightly recline the vehicle seatba[...]

If this happens, use the following steps to allow the system to detect that person and enable the right front passenger frontal airbag: 1. T urn the vehicle off. 2. Remove any additional material from the seat, such as blankets, cushions, seat covers, seat heaters, or seat massagers. 3. Place the seatback in the fully upright position. 4. Have the person sit upright in the seat, centered on the seat cushion, with legs comfortably extended. 5. Restart the vehicle and have the person remain in this position for two to three minutes after the on indicator is lit. This allows the system to detect that person and then enable the right front passenger frontal airbag. Additional Factors Affecting S[...]

We recommend that you not use seat covers or other aftermarket equipment except when approved by GM for your specific vehicle. See Adding Equipment to Y our Airbag-Equipped V ehicle on page 2 ‑ 79 for more information about modifications that can af fect how the system operates. The on indicator may be lit if an object, such as a briefcase, handbag, grocery bag, laptop or other electronic device, is put on an unoccupied seat. If this is not desired remove the object from the seat. { W ARNING: Stowing of articles under the passenger seat or between the passenger seat cushion and seatback may interfere with the proper operation of the passenger sensing system. Servicing Y our Airbag-Equipped[...]

Adding Equipment to Y our Airbag-Equipped V ehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Y es. If you add things that change the vehicle's frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly . Changing or moving any parts of the front seats, safety belts, the airbag sensing and diagnostic module, steering wheel, instrument panel, roof-rail airbag modules, ceiling headliner or pillar garnish trim, front sensors, or airbag wiring can affect the operation of the airbag system. In addition, the vehicle may have a passenger sensing system for the righ[...]

Restraint System Check Checking the Restraint Systems Safety Belts Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly . Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer/retailer to have it repaired. T orn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away . Make sure the safety belt reminder light is working. See Safety Belt Reminders on page 4 ‑ 22 for more information. Keep safety belts clean and dry . See Care of [...]

Replacing Restraint System Parts After a Crash { W ARNING: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. T o help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible. If the vehicle has been in a crash, do you need new safety belts or LA TCH system (if equipped) parts? After a very minor crash, nothing may be necessary . But the safety belt assemblies that were used during any crash may have been stressed or damaged. See your dealer/retailer to have the safety bel[...]

2 NOTES 2-82[...]

Section 3 Features and Controls Keys ........................... ..................... 3-3 Remote Keyless Entry (RKE) System . . . . . . . . . . . 3-4 Remote Keyless Entry (RKE) System O p e r a t i o n ................... ............... ... 3 - 4 Remote Vehicle Start . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Doors and Locks ... ............................... 3-9 Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 Power Door Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 Cargo Door Relocking . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 D e l a y e d L o c k i n g ............................... 3 - 1 0 Pro[...]

Section 3 Features and Controls Automatic Transmission Operation (Six Speed Automatic Transmission) . . . . . . . . 3-29 Automatic Transmission Operation (Four Speed Automatic Transmission) . . . . . . 3-34 T ow/Haul Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-36 Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38 Shifting Into Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-39 Shifting Out of Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40 Parking Over Things That Burn . . . . . . . . . . . . . . . . 3-41 E n g i n e E x h a u s t ................................ 3 - 4 2 Running the V ehicle Whi[...]

Keys { W ARNING: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window . Do not leave the keys in a vehicle with children. The key can be used for the ignition and all door locks. The key has a bar-coded key tag that the dealer/retailer or qualified locksmith can use to make new keys. Store this information in a safe place, not in your vehicle. Notice: If you ever lock your ke[...]

Remote Keyless Entry (RKE) System See Radio Frequency Statement on page 8 ‑ 20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/21 1 of Industry Canada. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment. If there is a decrease in the RKE operating range, try this: . Check the distance. The transmitter may be too far from the vehicle. Stand closer during rainy or snowy weather . . Check the location. Other vehicles or objects may be blocking the signal. T ake a few steps to the left or right, hold the transmitter higher , and try again. . Check the transmitter&[...]

The horn may chirp when Q is pressed again within five seconds. See DIC Vehicle Customization on page 4 ‑ 53 for additional information. K (Unlock): Press to unlock the driver door . If K is pressed again within five seconds, all remaining doors unlock. The interior lamps come on and stay on for 20 seconds or until the ignition is turned on. If enabled through the DIC, the parking lamps flash twice to indicate unlocking has occurred. See DIC Vehicle Customization on page 4 ‑ 53 for additional information. j (Cargo Door): Press to unlock only the cargo doors. / (Remote V ehicle Start): For vehicles with this feature, press Q and then press and hold / within five seconds to start the engin[...]

Battery Replacement Replace the battery if the REPLACE BA TTERY IN REMOTE KEY message displays in the DIC. See “ REPLACE BA TTERY IN REMOTE KEY ” under DIC Warnings and Messages on page 4 ‑ 44 for additional information. Notice: When replacing the battery , do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter . T o replace the battery: 1. Separate the transmitter with a flat, thin object inserted into the notch on the side of the transmitter . 2. Remove the old battery . Do not use a metal object. 3. Insert the new battery , positive side facing down. Replace with a CR2032 or equivalent battery . 4. Snap the transmitter back together [...]

Remote V ehicle Start Y our vehicle may have a remote start feature. This feature allows you to start the engine from outside the vehicle. It may also start the vehicle's heating or air conditioning systems. See Climate Control System on page 4 ‑ 15 for additional information. Laws in some local communities may restrict the use of remote starters. For example, some laws may require a person using remote start to have the vehicle in view when doing so. Check local regulations for any requirements on remote starting of vehicles. Do not use the remote start feature if your vehicle is low on fuel. Y our vehicle may run out of fuel. If your vehicle has the remote start feature, the RKE tra[...]

The maximum number of remote starts between ignition cycles with the key is two. If the remote start procedure is used again before the first 10 minute time frame has ended, the first 10 minutes will immediately expire and the second 10 minute time frame will start. After your vehicle's engine has been started two times using the remote start button, the vehicle's ignition switch must be turned to ON/RUN and then back to LOCK/OFF using the key before the remote start procedure can be used again. T o manually shut off the engine after a remote start: . Aim the RKE transmitter at the vehicle and press the remote start button until the parking lamps turn off. . T urn on the hazard war[...]

Doors and Locks Door Locks { W ARNING: Unlocked doors can be dangerous. . Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven. . Y oung children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it. (Continued) W ARNING: (Continued) . Outs[...]

Power Door Locks On vehicles with power door locks, the switches are located on the doors. T : Press the bottom of the switch to lock all the doors at once. Press the top of the switch to unlock all the doors at once. When a door is locked, the inside door handle will not work. Cargo Door Relocking If the cargo door is open when the lock button is pressed on the door or the RKE transmitter , all doors will lock except the cargo door . The cargo door will only lock when they are closed or when the delayed locking feature functions. Delayed Locking When locking the doors with the power lock switch and a door open, the doors will lock five seconds after the last door is closed. Y ou will hear t[...]

Automatic Door Lock The doors will automatically lock when the shift lever is moved out of P (Park). The automatic door locking feature cannot be disabled. Automatic Door Unlock The doors will automatically unlock when the shift lever is moved into P (Park). The automatic unlock feature can be disabled or programmed in different ways if the vehicle has an automatic transmission. For more information on programming, see DIC Vehicle Customization on page 4 ‑ 53 . Rear Door Security Locks Security locks are located on the front portion of the 60/40 side swing-out door or the side sliding door . 60/40 Swing-Out Side Door — Driver Side shown, Passenger Side similar For the 60/40 side swing-ou[...]

Side Sliding Door For the side sliding door , move the button up to engage the security feature. Move the button down to return the door locks to normal operation. Lockout Protection This feature protects you from locking the key in the vehicle when the key is in the ignition and a door is open. If the power lock switch is pressed when either the driver , passenger , or rear door is open, all the doors will lock and then the driver door will unlock. This feature does not include the side cargo door . Sliding Side Door T o open the sliding side door from the outside, pull the handle toward the rear of the vehicle and slide the door open. T o close the sliding side door from the outside, use t[...]

T o open the sliding side door from the inside, pull the handle toward the rear of the vehicle. Then, slide the door toward the rear of the vehicle. T o close the sliding side door from the inside, grasp the handle and slide the door toward the front of the vehicle. Make sure the door is completely closed before driving away . 60/40 Swing-Out Side Door T o open the front portion of a 60/40 door from the outside, pull out on the handle and open the door . 3-13[...]

T o open the front portion of a 60/40 door from the inside, pull the handle toward you and push the door open. T o open the rear portion of a 60/40 door from the outside, pull the handle on the side of the rear door and pull the door toward you. T o close the 60/40 side doors, close the rear door first. Then close the front door . Check to make sure that both doors are completely closed. The front side swing-out door has a check strap assembly in the door frame to keep the door from opening beyond 90 degrees. T o open the door beyond 90 degrees, close the door partially , pull the check strap toward you and then open the door . When the door is closed, the check strap will automatically re-e[...]

Rear Doors { W ARNING: Unlocked doors can be dangerous. . Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven. . Y oung children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it. . Outsiders can easily enter through an unlocked door wh[...]

Windows { W ARNING: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather. Manual Windows Operate the manual windows by turning the hand crank on each door to raise or lower the side door windows. 3-16[...]

Power Windows { W ARNING: Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closing window . Do not leave keys in a vehicle with children. When there are children in the rear seat use the window lockout button to prevent unintentional operation of the windows. If the vehicle has power windows, the controls are located on each of the side doors. The driver door has a switch for the passenger window also. The power windows will wo[...]

mode. This mode can be cancelled at any time by pulling up on the switch. T o open the window part way , lightly tap the switch until the window is at the desired position. Swing-Out Windows Side Swing-Out Window T o open the side door swing-out window , pull up on the latch at the edge of the window . Swing the window out and push down on the latch to lock the window into place. T o close the window , pull the latch toward you and push down on the latch to lock it. Rear Swing ‐ Out Windows The vehicle also has rear swing ‐ out windows. The rear swing-out windows work the same way as the side swing out window , but the latch is located at the bottom edge of the window . 3-18[...]

Enhanced T echnology Glass The vehicle may be equipped with Enhanced T echnology Glass (ETG). ETG is part of the overall occupant protection system on passenger vans. ETG may help to keep passengers sitting next to these fixed windows from being ejected through the glass in some, but not in all crashes. Even with this glass, safety belts must still be worn at all times. For passenger vans, use only ETG glass approved for your vehicle for replacement when damaged. The following table shows laminated glass location, based on vehicle model and options. V ehicle Configuration ETG Locations Eight Seat Passenger V ans Sliding door forward window T welve and Fifteen Seat Passenger V ans Sliding doo[...]

P ASS-Key ® III+ Electronic Immobilizer See Radio Frequency Statement on page 8 ‑ 20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/21 1 of Industry Canada. P ASS-Key ® III+ Electronic Immobilizer Operation Y our vehicle is equipped with the P ASS-Key ® III+ (Personalized Automotive Security System) theft-deterrent system. P ASS-Key ® III+ is a passive theft deterrent system. The system is automatically armed when the key is removed from the ignition. Y ou do not have to manually arm or disarm the system. The security light will come on if there is a problem with arming or disarming the theft-deterrent system. When the P ASS-Key ® II[...]

It is possible for the P ASS-Key ® III+ decoder to learn the transponder value of a new or replacement key . Up to 10 keys may be programmed for the vehicle. This procedure is for learning additional keys only . If all the currently programmed keys are lost or do not operate, you must see your dealer/retailer or a locksmith who can service P ASS-Key ® III+ to have keys made and programmed to the system. See your dealer/retailer or a locksmith who can service P ASS-Key ® III+ to get a new key blank that is cut exactly as the ignition key that operates the system. T o program the new key: 1. V erify the new key has 1 stamped on it. 2. Insert the original, already programmed key into the ign[...]

Starting and Operating Y our V ehicle New V ehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: . Keep your speed at 55 mph (88 km/h) or less for the first 500 miles (805 km). . Do not drive at any one constant speed, fast or slow , for the first 500 miles (805 km). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle. . A void making hard stops for the first 200 miles (322 km) or so. During this time the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this breaking-in guideline every time you[...]

Ignition Positions The ignition switch has four different positions. T o shift out of P (Park), the ignition must be in ON/RUN and the regular brake pedal applied. A (LOCK/OFF) : This position locks the ignition and transmission. Y ou will only be able to remove the key when the ignition is turned to LOCK/OFF . Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key . Use the correct key , make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer/retailer . B (ACC/ACCESSOR Y) : This is the position in which you can operate things like the radio and the windshield wipers when th[...]

If you leave the key in the ACC/ACCESSORY or ON/ RUN position with the engine off, the battery could be drained. Y ou may not be able to start the vehicle if the battery is allowed to drain for an extended period of time. D (ST ART) : This is the position that starts the engine. When the engine starts, release the key . The ignition switch returns to ON/RUN for driving. A warning tone will sound when the driver door is opened, the ignition is in ACC/ACCESSORY or LOCK/OFF and the key is in the ignition. Retained Accessory Power (RAP) These vehicle accessories can be used for up to 10 minutes after the engine is turned off: . Audio System . Power Windows (if equipped) These features will work [...]

Starting the Engine If the vehicle has the DURAMAX ® Diesel engine, see the DURAMAX ® Diesel manual for more information. T o place the transmission in the proper gear: Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. T o restart the engine when the vehicle is already moving, use N (Neutral) only . Starting Procedure 1. With your foot off the accelerator pedal, turn the ignition key to ST ART . When the engine starts, let go of the key . The idle speed will go down as your engine gets warm. Do not race the engine immediately after starting it. Operate the engine and transmission gently to allow the oil to warm up and lubricate all moving par[...]

2. If the engine does not start after 5 ‐ 10 seconds, especially in very cold weather (below 0°F or − 18°C), it could be flooded with too much gasoline. T ry pushing the accelerator pedal all the way to the floor and holding it there as you hold the key in ST ART for up to 15 seconds. Wait at least 15 seconds between each try , to allow the cranking motor to cool down. When the engine starts, let go of the key and accelerator . If the vehicle starts briefly but then stops again, do the same thing. This clears the extra gasoline from the engine. Do not race the engine immediately after starting it. Operate the engine and transmission gently until the oil warms up and lubricates all movi[...]

Fast Idle System Fast Idle System with Switch If the vehicle has this feature it is available only with cruise control. The manual fast idle switch is operated using the cruise control buttons located on the left hand side of the steering wheel. This system can be used to increase engine idle speed whenever the following conditions are met: . The park brake is set. . The brake pedal is not pressed. . The vehicle must not be moving and the accelerator must not be pressed. T o control the fast idle: . T o Enable the Fast idle, press and release the Cruise Control On/Off button and ensure that the LED is lit. . For the preset Fast Idle, press and release the cruise set switch. This will set the[...]

Engine Coolant Heater If the vehicle has the DURAMAX Diesel engine, see the DURAMAX Diesel manual for more information. The engine coolant heater can provide easier starting and better fuel economy during engine warm ‐ up in cold weather conditions at or below 0°F ( − 18°C). V ehicles with an engine coolant heater should be plugged in at least four hours before starting. An internal thermostat in the plug-end of the cord may exist which will prevent engine coolant heater operation at temperatures above 0°F ( − 18°C). T o Use the Engine Coolant Heater 1. T urn off the engine. 2. Open the hood and unwrap the electrical cord. The cord for the engine coolant heater is located on the dr[...]

Automatic T ransmission Operation (Six Speed Automatic T ransmission) V ehicles with a six speed automatic transmission have a shift position indicator within the instrument panel cluster . There are several different positions for the shift lever . See “ Range Selection Mode ” later in this section. P (Park): This position locks the rear wheels. It is the best position to use when starting the engine because the vehicle cannot move easily . When parked on a hill, especially when the vehicle has a heavy load, you might notice an increase in the effort to shift out of P (Park). See T orque Lock (Automatic T ransmission) under Shifting Into Park on page 3 ‑ 39 for more information. { W A[...]

N (Neutral): In this position, the engine does not connect with the wheels. T o restart when you are already moving, use N (Neutral) only . Also, use N (Neutral) when the vehicle is being towed. { W ARNING: Shifting into a drive gear while the engine is running at high speed is dangerous. Unless your foot is firmly on the brake pedal, the vehicle could move very rapidly . Y ou could lose control and hit people or objects. Do not shift into a drive gear while the engine is running at high speed. Notice: Shifting out of P (Park) or N (Neutral) with the engine running at high speed may damage the transmission. The repairs would not be covered by the vehicle warranty . Be sure the engine is not [...]

The vehicle has a shift stabilization feature that adjusts the transmission shifting to the current driving conditions in order to reduce rapid upshifts and downshifts. This shift stabilization feature is designed to determine, before making an upshift, if the engine is able to maintain vehicle speed by analyzing things such as vehicle speed, throttle position, and vehicle load. If the shift stabilization feature determines that a current vehicle speed cannot be maintained, the transmission does not upshift and instead holds the current gear . In some cases, this could appear to be a delayed shift, however the transmission is operating normally . The transmission uses adaptive shift controls[...]

1 (First): This position reduces vehicle speed without using the brakes. Y ou can use it for major/severe downgrades where the vehicle would otherwise accelerate due to steepness of grade. When you shift to 1 (First) it provides the lowest gear appropriate to current road speed and continues to downshift as the vehicle slows, eventually downshifting to 1 (First) gear. The transmission can be held in 1 (First) gear using Range Select Mode or the shift lever . See Range Select Mode later in this section. Notice: Spinning the tires or holding the vehicle in one place on a hill using only the accelerator pedal may damage the transmission. The repair will not be covered by the vehicle warranty . [...]

T o use this feature, do the following: 1. Move the shift lever to M (Manual Mode). 2. Press the plus/minus buttons, located on the steering column shift lever , to select the desired range of gears for current driving conditions. When M (Manual Mode) is selected a number displays in the DIC next to the M indicating the current gear . This number is the highest gear that can be used. However , the vehicle can automatically shift to lower gears as it adjusts to driving conditions. This means that all gears below that number are available. When 5 (Fifth) is selected, 1 (First) through 5 (Fifth) gears are automatically shifted by the vehicle, but 6 (Sixth) cannot be used until the plus/minus bu[...]

Automatic T ransmission Operation (Four Speed Automatic T ransmission) There are several different positions for your shift lever . P (Park): This position locks your rear wheels. It is the best position to use when you start the engine because the vehicle cannot move easily . { W ARNING: It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. Do not leave the vehicle when the engine is running unless you have to. If you have left the engine running, the vehicle can move suddenly . Y ou or others could be injured. T o be sure the vehicle will not move, even when you are on fairly level ground, always set t[...]

R (Reverse): Use this gear to back up. Notice: Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission. The repairs would not be covered by the vehicle warranty . Shift to R (Reverse) only after the vehicle is stopped. T o rock the vehicle back and forth to get out of snow , ice or sand without damaging the transmission, see If Y our V ehicle is Stuck in Sand, Mud, Ice, or Snow on page 5 ‑ 18 . N (Neutral): In this position, the engine does not connect with the wheels. T o restart the engine when the vehicle is already moving, use N (Neutral) only . Also, use N (Neutral) when the vehicle is being towed. { W ARNING: Shifting into a drive gear while the engi[...]

2 (Second): This position reduces vehicle speed even more than 3 (Third) without using the brakes. Y ou can use 2 (Second) on hills. It can help control vehicle speed as you go down steep mountain roads, but then you would also want to use the brakes off and on. Y ou may use this feature for reducing torque to the rear wheels when you are trying to start the vehicle from a stop on slippery road surfaces. 1 (First): This position reduces vehicle speed even more than 2 (Second) without using the brakes. Y ou can use it on very steep hills, or in deep snow or mud. If the shift lever is put in 1 (First) while the vehicle is moving forward, the transmission will not shift into first gear until th[...]

T urn the tow/haul mode on and off by pressing the button, located to the right of the steering wheel on the instrument panel. When tow/haul is on, a light on the instrument panel cluster will come on. See T ow/Haul Mode Light on page 4 ‑ 35 for more information. Also see “ T ow Haul Mode ” under T owing a T railer on page 5 ‑ 30 for more information. Grade Braking (Six Speed Automatic T ransmission) The Grade Braking shift modes can be activated by pressing the tow/haul button on the dash. While in Range Selection Mode , Grade Braking is deactivated allowing the driver to select a desired range of gears. Grade Braking is only active while the T ow/Haul Mode is selected and you are n[...]

Cruise Grade Braking (Six Speed Automatic T ransmission) Cruise Grade Braking operates only while cruise control is engaged in T ow/Haul mode. Cruise Grade Braking assists in maintaining desired vehicle speeds when driving on downhill grades in cruise control by automatically shifting to lower gears when the cruise set speed is exceeded. While in the Range Selection Mode (RSM) mode, cruise grade braking is not available. See Automatic T ransmission Operation (Six Speed Automatic T ransmission) on page 3 ‑ 29 or Automatic T ransmission Operation (Four Speed Automatic T ransmission) on page 3 ‑ 34 . Parking Brake T o set the parking brake, hold the regular brake pedal, then push down the p[...]

T o release the parking brake, hold the regular brake pedal down. Pull the handle, located just above the parking brake pedal, with the parking brake symbol, to release the parking brake. If the ignition is on when the parking brake is released, the brake system warning light will go off. Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. V erify that the parking brake is fully released and the brake warning light is off before driving. If you are towing a trailer and are parking on a hill, see T owing a T railer on page 5 ‑ 30 . Shifting Into Park { W ARNING: It can be dangerous to get out of the vehicle if the[...]

Leaving the V ehicle With the Engine Running { W ARNING: It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire. Y ou or others could be injured. Do not leave the vehicle with the engine running. If you have to leave the vehicle with the engine running, be sure the vehicle is in P (Park) and the parking brake is firmly set before you leave it. After you move the shift lever into P (Park), hold the regular brake pedal down. Then, see if you can move the shift lever away from P (Par[...]

The shift lock control system is designed to do the following: . Prevent the ignition key from being removed unless the shift lever is in P (Park). . Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN and the regular brake pedal is applied. The shift lock control system is always functional except in the case of a dead battery or low voltage (less than 9 V) battery . If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery . See Jump Starting on page 6 ‑ 40 for more information. T o shift out of P (Park) use the following: 1. Apply the brake pedal. 2. Move the shift lever to the desired position. If [...]

Engine Exhaust { W ARNING: Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: . The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes). . The exhaust smells or sounds strange or different. . The exhaust system leaks due to corrosion or damage. . The vehicle ’ s exhaust system has been modified, damaged or improperly repaired. (Continued) W ARNING: (Continued) . There are holes or openings in the vehicle body from damage or after-market modifications that are not completely sealed. If unusual fume[...]

Running the V ehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know . { W ARNING: Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has no fresh air ventilation. For more information, see Engine Exhaust on page 3 ‑ 42 . { W ARNING: It can be dangerous to get out of the vehicle if the automatic transmission shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can ro[...]

Mirrors Manual Rearview Mirror Hold the inside rearview mirror in the center to move it for a clearer view behind your vehicle. Adjust the mirror to avoid glare from the headlamps behind. Push the tab forward for daytime use and pull it for nighttime use. If you have a cargo van without the rear door glass, the vehicle may not have an inside rearview mirror . Outside Manual Mirrors Adjust the mirrors by pressing the mirror up and down and left and right so you can see a little of the side of your vehicle, and have a clear view of objects behind you. The mirrors can be manually folded in or out. On the lower portion of each mirror is an auxiliary convex mirror . A convex mirror's surface[...]

Outside Power Mirrors V ehicles with outside power mirrors have controls located on the driver side door . Select each mirror by turning the knob clockwise for the passenger side mirror or counterclockwise for the driver side mirror . The center position is neutral. Then, adjust the mirror angle by moving the knob in the desired direction. The auxiliary convex mirrors can only be adjusted manually . Outside Convex Mirror { W ARNING: A convex mirror can make things, like other vehicles, look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on the right. Check the inside mirror or glance over your shoulder before changing lanes. The passeng[...]

Outside Heated Mirrors For vehicles with heated mirrors: < (Rear Defogger): Press to heat the mirrors. An indicator light in the button lights when the outside heated mirrors are activated. See “ Rear Window Defogger ” under Climate Control System on page 4 ‑ 15 for more information. Storage Areas Y our vehicle may have a front storage compartment. It is located at the center of the instrument panel extension, by the floor . T o open the compartment, pull up on the latch. The compartment will open automatically . Storage compartments may also be included on the inside of each front door . 3-46[...]

Section 4 Instrument Panel Instrument Panel Overview ........ ........... ..... 4-3 Hazard W arning Flashers . . . . . . . . . . . . . . . . . . . . . . . 4-3 Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 T ilt Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 T urn Signal/Multifunction Lever . . . . . . . . . . . . . . . . . . 4-4 T urn and Lane-Change Signals . . . . . . . . . . . . . . . . . 4-4 Headlamp High/Low-Beam Changer . . . . . . . . . . . . 4-5 Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Windshield Wipers . . . . . . . . . . . . . . . . . . . . . . [...]

Section 4 Instrument Panel Security Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 Cruise Control Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 Highbeam On Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 T ow/Haul Mode Light . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 F u e l G a u g e .................................... 4 - 3 6 Driver Information Center (DIC) .................. 4-37 DIC Operation and Displays . . . . . . . . . . . . . . . . . . . 4-37 DIC Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42 DIC Warnings and Messages . . . . . . . . . . . . . . . . . . 4-44 DIC Veh[...]

Instrument Panel Overview Hazard W arning Flashers | (Hazard W arning Flasher): Press this button located on top of the steering column, to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press again to turn the flashers off. When the hazard warning flashers are on, the vehicle's turn signals will not work. Horn Press the horn symbol in the middle of the steering wheel to sound the horn. Tilt Wheel For vehicles with a tilt steering wheel, the lever is located on the left side of the steering column. T o adjust the steering wheel: 1. Pull the lever to move the steering wheel up or down into a comfortable position. 2. Release the [...]

T urn Signal/Multifunction Lever The lever on the left side of the steering column includes the following: G : T urn and Lane Change Signals. 5 3 : Headlamp High/Low ‐ Beam Changer . N : Windshield Wipers. L : Windshield W asher . Flash-to-Pass Feature. Information for these features is on the pages following. T urn and Lane-Change Signals G : An arrow on the instrument panel cluster flashes in the direction of the turn or lane change. T o signal a turn, move the lever all the way up or down. T o signal a lane change, raise or lower the lever until the arrow starts to flash. The turn signal automatically flashes three times and if the tow ‐ haul mode is active it flashes six times. Holdi[...]

Headlamp High/Low-Beam Changer 23 (Headlamp High/Low ‐ Beam Changer): Pull the turn signal lever all the way toward you to change the headlamps from low to high beam. Then release it. This instrument panel cluster light comes on when the high beam headlamps are on. Flash-to-Pass This feature is used to signal to the vehicle ahead that you want to pass. If the headlamps are off or in the low ‐ beam position, pull the turn signal lever toward you to momentarily switch to high ‐ beams. Release the lever to turn the high-beam headlamps off. Windshield Wipers The windshield wiper control is located on the multifunction lever on the left side of the steering wheel. T urn the band with N on i[...]

Windshield W asher The windshield wiper paddle is located on top of the multifunction lever . L (W asher Fluid): Push the paddle to spray washer fluid on the windshield. The wipers will clear the window and then either stop or return to the preset speed. { W ARNING: In freezing weather , do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. Cruise Control { W ARNING: Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction[...]

The cruise control buttons are located on left side of the steering wheel. T (On/Off): This button can both activate and turn off the system. The indicator light on the button turns on when cruise control is on and turns off when cruise control is off. + RES (Resume/Accelerate): Press to make the vehicle accelerate or resume to a previously set speed. SET − (Set/Coast): Press to set the speed or make the vehicle decelerate. [ (Cancel): Press to cancel cruise control without erasing the set speed from memory . Setting Cruise Control Cruise control will not work if the parking brake is set, or if the master cylinder brake fluid level is low . The cruise control light on the instrument panel [...]

Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, this shuts of f the cruise control. But it does not need to be reset. Once the vehicle speed reaches about 40 km/h (25 mph) or more, press the +RES button on the steering wheel. The vehicle returns to the previously set speed and stays there. Increasing Speed While Using Cruise Control T o increase the cruise speed while using cruise control: . Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. . T o increase vehicle speed in small increments, press the +RES button. Each time this is done, the vehicle goes about 1.6 km/h (1 mph) faster .[...]

Ending Cruise Control There are three ways to end cruise control: . Step lightly on the brake pedal. . Press the [ button on the steering wheel. . Press the I button on the steering wheel. Erasing Speed Memory The cruise control set speed memory is erased when the cruise control or the ignition is turned off. Exterior Lamps The exterior lamps control is located on the instrument panel to the left of the steering wheel. It controls the following systems: . Headlamps . T aillamps . Parking Lamps . License Plate Lamps . Instrument Panel Lights The exterior lamps control has four positions: O (Off): Briefly turn the control to this position to turn the automatic headlamps and daytime running lam[...]

; (Parking Lamps): T urns on the parking lamps together with the following: . Instrument Panel Lights . T aillamps . License Plate Lamps 2 (Headlamps): T urns on the headlamps together with the following lamps listed below . . Parking Lamps . Instrument Panel Lights . T aillamps . License Plate Lamps If the headlamps are turned on while the vehicle is on, the headlamps turn off automatically 10 minutes after the ignition is turned off. If the headlamps are turned on while the vehicle is off, the headlamps will continue to stay on. T o prevent the battery from being drained, turn the control to the 9 position. A warning chime sounds if the driver door is opened while the ignition switch is of[...]

The automatic headlamp system automatically switches from DRL to the headlamps depending on the darkness of the surroundings. T o turn off the DRL, turn the exterior lamp control to the off position and then release it. For vehicles first sold in Canada, the transmission must be in the P (Park) position, before the DRL can be turned off. Automatic Headlamp System When it is dark enough outside and the headlamp switch is in AUTO, the automatic headlamp system turns on the headlamps, along with the taillamps, sidemarker , parking lamps, roof marker lamps, and the instrument panel lights. The radio lights will also be dim. T o turn off the automatic headlamp system, turn the exterior lamps swit[...]

Dome Lamps The dome lamps come on when any door is opened. They turn off after all the doors are closed. The dome lamps can also be turned on by turning the instrument panel brightness knob, located on the instrument panel to the left of the steering column, clockwise to the farthest position. In this position, the dome lamps remain on whether a door is opened or closed. Dome Lamp Override The dome lamp override button is located next to the exterior lamps control. The dome lamp override sets the dome lamps to remain off or come on automatically when a door is opened. E (Dome Lamp Override): Press the button in and the dome lamps remain off when a door is opened. Press the button again to re[...]

Entry/Exit Lighting The vehicle has an illuminated entry/exit feature. The dome lamps come on if the dome override button is in the out position, when a door is opened or the key is removed from the ignition. Reading Lamps For vehicles with reading lamps, press the button located next to each lamp to turn it on or off. The vehicle may also have reading lamps in other locations. The lamps cannot be adjusted. Electric Power Management The vehicle has Electric Power Management (EPM) that estimates the battery's temperature and state of charge. It then adjusts the voltage for best performance and extended life of the battery . When the battery's state of charge is low , the voltage is [...]

Battery Run-Down Protection This feature shuts off the dome lamps if they are left on for more than 10 minutes when the ignition is in LOCK/OFF . This helps to prevent the battery from running down. Accessory Power Outlet(s) The accessory power outlets can be used to connect auxiliary electrical equipment, such as a cellular phone. The vehicle may have two accessory power outlets located on the instrument panel. T o use the accessory power outlet lift the cover . The spring cap cover closes by itself when the outlet is empty . Certain power accessory plugs may not be compatible to the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a problem, see [...]

Ashtray(s) and Cigarette Lighter For vehicles with an ashtray it is located in the center console or on the instrument panel. Pull up on the ashtray door to open it if it is in the console or pull the door open it if it is on the instrument panel. Notice: If papers, pins, or other flammable items are put in the ashtray , hot cigarettes or other smoking materials could ignite them and possibly damage the vehicle. Never put flammable items in the ashtray . T o remove the ashtray , pull it out from the console or from the slide out door . T o reinstall the ashtray , slide it back to the original position. T o use the cigarette lighter , if the vehicle has one, push it in all the way , and let g[...]

Air Delivery Mode Control: Turn the knob clockwise or counterclockwise to change the current airflow mode. H (V ent): Air is directed to the instrument panel outlets. ) (Bi-Level): Air is divided between the instrument panel and floor outlets, with some air directed toward the windshield. 6 (Floor): Air is directed to the floor outlets with some air directed to the windshield and side windows. - (Defog): This mode clears the windows of fog or moisture. Outside air is directed to the floor and defroster outlets. Adjust the temperature knob for warmer or cooler air . The air conditioning compressor might turn on in this setting to dehumidify the air . 1 (Defrost): This mode clears the windshie[...]

Rear Window Defogger For vehicles with a rear window defogger , a warming grid is used to remove fog or frost from the rear window . It only works when the ignition is in ON/RUN. < (Rear Window Defogger): Press to turn the rear window defogger on or off. The rear window defogger turns off several minutes after the button is pressed. If turned on again, the defogger will run for several more minutes before turning off. The defogger can also be turned off by turning off the engine. Do not drive the vehicle until all the windows are clear. Notice: Do not use a razor blade or sharp object to clear the inside rear window. Do not adhere anything to the defogger grid lines in the rear glass. The[...]

Rear Heating System For vehicles with a rear heating system, it lets you adjust the amount of air flowing into the rear of the vehicle, from the front-seating area. This feature works with the main climate-control system in the vehicle. AUX: The thumbwheel for this system is located in the switchbank below the audio system. 9 (Fan): Turn the thumbwheel up or down to increase or decrease the amount of heated air sent to the rear-seating area. Q (High): This position supplies the most amount of heat to the rear-seating area. c (Medium): This position supplies half the amount of heat to the rear ‐ seating area. R (Low): This position supplies the least amount of heat to the rear-seating area.[...]

Front Climate Control Panel Use this control panel to maintain a separate temperature setting. Adjust the direction of the airflow or adjust the fan speed for the rear seat passenger(s). Rear Climate Control Panel A. Fan Control B. Air Delivery Mode Control C. T emperature Control If the vehicle has a 343 cm (135 inch) wheelbase, a rear control panel for this system is located in the second row behind the driver in the rear of the vehicle. The temperature, air delivery mode, and the fan speed can be adjusted for the rear seating area by a rear seat passenger . AUX (Auxiliary): T urn the fan knob on the front climate control panel to AUX to let rear seat passengers use the control panel in th[...]

Air Delivery Mode Control: Turn clockwise or counterclockwise to change the direction of the airflow in the rear seating area. T o change the current mode, select one of the following: H (V ent): Air is directed to the upper outlets, with some directed to the floor outlets. 2 (Floor): Air is directed to the floor outlets. Be sure to keep the area under the front seats clear of any objects so that the air inside of the vehicle can circulate effectively . For information on how to use the main climate control system, see Climate Control System on page 4 ‑ 15 . For information on ventilation, see Outlet Adjustment on page 4 ‑ 17 . W arning Lights, Gauges, and Indicators W arning lights and [...]

Instrument Panel Cluster United States 4 ‐ Speed V ersion shown, 6 ‐ Speed and Canada similar 4-21[...]

Speedometer and Odometer The speedometer shows the vehicle speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer shows how far the vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). This vehicle has a tamper resistant odometer . The digital odometer will read 999,999 if it is turned back. If the vehicle needs a new odometer installed, it must be set to the mileage total of the old odometer . If that is not possible, then it must be set at zero and a label must be put on the driver door to show the old mileage reading when the new odometer was installed. T rip Odometer The trip odometer can show how far the vehicle ha[...]

Airbag Readiness Light The system checks the airbag's electrical system for possible malfunctions. If the light stays on it indicates there is an electrical problem. The system check includes the airbag sensor , the pretensioners, the airbag modules, the wiring and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 2 ‑ 59 . The airbag readiness light flashes for a few seconds when the engine is started. If the light does not come on then, have it fixed immediately . { W ARNING: If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly[...]

Airbag Off Light When the right front passenger airbag is manually turned off using the airbag on-off switch on the instrument panel, if equipped, the indicator light OFF or the off symbol will come on and stay on as a reminder that the airbag has been turned off. This light will go off when the airbag has been turned on. See Airbag Off Switch on page 2 ‑ 69 for more information, including important safety information. United States Canada { W ARNING: If the right front passenger's airbag is turned off for a person who is not in a risk group identified by the national government, that person will not have the extra protection of an airbag. In a crash, the airbag will not be able to in[...]

{ W ARNING: If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. For example, the right front passenger airbag could inflate even though the airbag on-off switch is turned off. T o help avoid injury to yourself or others, have the vehicle serviced right away . See Airbag Readiness Light on page 4 ‑ 23 for more information, including important safety information. If the word ON or the on symbol is lit, it means that the right front passenger frontal airbag is enabled (may inflate). See Airbag Off Switch on page 2 ‑ 69 for more information, including important safety information. Passenger Airbag Status Indicator If the vehi[...]

If the word ON or the on symbol is lit on the passenger airbag status indicator , it means that the right front passenger frontal airbag is enabled (may inflate). If the word OFF or the off symbol is lit on the airbag status indicator , it means that the passenger sensing system has turned off the right front passenger frontal airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer/retailer for service. { W ARNING: If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. T o help avoid injury[...]

V oltmeter Gauge When the engine is not running, but the ignition is on, this gauge shows the battery's state of charge in DC volts. When the engine is running, the gauge shows the condition of the charging system. Readings between the low and high warning zones indicate the normal operating range. Readings in the low warning zone may occur when a large number of electrical accessories are operating in the vehicle and the engine is left at an idle for an extended period. This condition is normal since the charging system is not able to provide full power at engine idle. As engine speeds are increased, this condition should correct itself as higher engine speeds allow the charging system[...]

When the ignition is on, the brake system warning light also comes on when the parking brake is set. See Parking Brake on page 3 ‑ 38 for more information. The light stays on if the parking brake does not fully release. If it stays on after the parking brake is fully released, it means the vehicle has a brake problem. If the light comes on while driving, pull off the road and stop carefully . The pedal might be harder to push, or the pedal might go closer to the floor . It could take longer to stop. If the light is still on, have the vehicle towed for service. See T owing Y our V ehicle on page 5 ‑ 26 . { W ARNING: The brake system might not be working properly if the brake system warnin[...]

For vehicles with a Driver Information Center (DIC), see DIC Warnings and Messages on page 4 ‑ 44 for all brake related DIC messages. StabiliT rak ® Indicator Light For vehicles with the StabiliT rak ® system, this light comes on or flashes, according to the description table for the StabiliT rak system. For more information, see StabiliT rak ® System on page 5 ‑ 5 . Three chimes sound if the light turns on and one chime if the light turns off. If this light remains on steady , the vehicle needs to be taken in for service. Engine Coolant T emperature Gauge United States Canada This gauge shows the engine coolant temperature. It also provides an indicator of how hard the vehicle is wor[...]

Tire Pressure Light For vehicles with a tire pressure monitoring system, this light comes on briefly when the engine is started. It provides information about tire pressures and the Tire Pressure Monitoring System. When the Light is On Steady This indicates that one or more of the tires is significantly underinflated. A tire pressure message in the Driver Information Center (DIC), can accompany the light. See Driver Information Center (DIC) on page 4 ‑ 37 for more information. Stop and check the tires as soon as it is safe to do so. If underinflated, inflate to the proper pressure. See Inflation - Tire Pressure on page 6 ‑ 64 for more information. When the Light Flashes First and Then is[...]

If the check engine light comes on and stays on, while the engine is running, this indicates that there is an OBD II problem and service is required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system assists the service technician in correctly diagnosing any malfunction. Notice: If the vehicle is continually driven with this light on, after a while, the emission controls might not work as well, the vehicle's fuel economy might not be as good, and the engine might not run as smoothly . This could lead to costly repairs that might not be covered by the vehicle warranty . Notic[...]

Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. An emission system malfunction might be corrected by doing the following: . Make sure the fuel cap is fully installed. See Filling the T ank on page 6 ‑ 10 . The diagnostic system can determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap allows fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn the light off. . If the vehicle has been driven through a deep puddle of water , the vehicle's electrical system might be wet. The condition is usually corrected when the [...]

Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or might begin programs to inspect the emission control equipment on the vehicle. Failure to pass this inspection could prevent getting a vehicle registration. Here are some things to know to help the vehicle pass an inspection: . The vehicle will not pass this inspection if the check engine light is on with the engine running, or if the key is in ON/RUN and the light is not on. . The vehicle will not pass this inspection if the OBD II (on-board diagnostic) system determines that critical emission control systems have not been completely diagnosed by the system. The vehicle would be considered not [...]

Oil pressure may vary with engine speed, outside temperature and oil viscosity , but readings above the low pressure zone indicate the normal operating range. A reading in the low pressure zone may be caused by a dangerously low oil level or other problem causing low oil pressure. Check your oil as soon as possible. { W ARNING: Do not keep driving if the oil pressure is low . The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and have the vehicle serviced. Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty . Always follow the maintenance schedule in this manua[...]

This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer/ retailer . If the system is working normally the indicator light then goes off. If the light comes on and stays on, it means that oil is not flowing through the engine properly . The vehicle could be low on oil and it might have some other system problem. Security Light For information regarding this light and the vehicle's security system, see P ASS-Key ® III+ Electronic Immobilizer Operation on page 3 ‑ 20 . Cruise Control Light The cruise control light comes on whenever the cruise control is set. The light goes out when the cruise control is turned off. See Cruise Contr[...]

Fuel Gauge United States Canada The fuel gauge, when the ignition is on, indicates how much fuel is left in the vehicle's fuel tank. An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on. The gauge first indicates empty before the vehicle is out of fuel, and the fuel tank should be refueled soon. Listed are four situations customers might experience with the fuel gauge. None of these indicate a problem with the fuel gauge: . At the gas station, the fuel pump shuts off before the gauge reads full. . It takes a little more or less fuel to fill up than the fuel gauge indicated. For example, the gauge may have indicated the tank was half full, but it actually took[...]

Driver Information Center (DIC) Y our vehicle has a Driver Information Center (DIC). All messages will appear in the DIC display located at the bottom of the instrument panel cluster . The DIC buttons are located on the instrument panel, next to the instrument panel cluster . The DIC comes on when the ignition is on. After a short delay , the DIC will display the information that was last displayed before the engine was turned off. The DIC displays trip, fuel, and vehicle system information, and warning messages if a system problem is detected. If your vehicle has these features, the DIC also displays the compass direction and the outside air temperature when viewing the trip and fuel inform[...]

T (V ehicle Information): Press this button to display the oil life, units, tire pressure readings for vehicles with the T ire Pressure Monitor System (TPMS), engine hours, T ire Pressure Monitor System (TPMS) programming for vehicles with the TPMS and without a Remote Keyless Entry (RKE) transmitter , compass zone and compass calibration on vehicles with this feature, and RKE transmitter programming. U (Customization): Press this button to customize the feature settings on your vehicle. See DIC V ehicle Customization on page 4 ‑ 53 for more information. V (Set/Reset): Press this button to set or reset certain functions and to turn off or acknowledge messages on the DIC. T rip/Fuel Menu It[...]

If the retro-active reset feature is activated after the vehicle is started, but before it begins moving, the display will show the number of kilometers (km) or miles (mi) that were driven during the last ignition cycle. Fuel Range Press the trip/fuel button until FUEL RANGE displays. This display shows the approximate number of remaining kilometers (km) or miles (mi) the vehicle can be driven without refueling. The display will show LOW if the fuel level is low. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. This estimate will change if driving conditions change. For example, if[...]

The timer will record up to 99 hours, 59 minutes and 59 seconds (99:59:59) after which the display will return to zero. T o stop the timer , press the set/reset button briefly while TIMER is displayed. T o reset the timer to zero, press and hold the set/reset button while TIMER is displayed. A verage Speed Press the trip/fuel button until A VERAGE SPEED displays. This display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. T o reset the value, press and hold the set/ reset button. The display will return to zero. Digital T achometer Press t[...]

It cannot be reset accurately until the next oil change. T o reset the engine oil life system, see Engine Oil Life System on page 6 ‑ 18 . Units Press the vehicle information button until UNITS displays. This display allows you to select between English or Metric units of measurement. Once in this display , press the set/reset button to select between ENGLISH or METRIC units. Tire Pressure If your vehicle has the Tire Pressure Monitor System (TPMS), the pressure for each tire can be viewed in the DIC. The tire pressure will be shown in either kilopascals (kPa) or pounds per square inch (psi). Press the vehicle information button until the DIC displays FRONT TIRES PSI (kPa) LEFT ## RIGHT ##[...]

Relearn Remote Key T o access this display , the vehicle must be in P (Park). This display allows you to match Remote Keyless Entry (RKE) transmitters to your vehicle. This procedure will erase all previously learned transmitters. Therefore, they must be relearned as additional transmitters. T o match an RKE transmitter to your vehicle: 1. Press the vehicle information button until PRESS V TO RELEARN REMOTE KEY displays. 2. Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed. 3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. A chime will sound indicating that the transmitter is matched. 4. T o match additional t[...]

2. Find the vehicle's current location and variance zone number on the map. Zones 1 through 15 are available. 3. Press the set/reset button to scroll through and select the appropriate variance zone. 4. Press the trip/fuel button until the vehicle heading, for example, N for North, is displayed in the DIC. 5. If calibration is necessary , calibrate the compass. See “ Compass Calibration Procedure ” following. Compass Calibration The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger . It is suggested to calibrate away from tall buildings, utility w[...]

T o calibrate the compass, use the following procedure: Compass Calibration Procedure 1. Before calibrating the compass, make sure the compass zone is set to the variance zone in which the vehicle is located. See “ Compass V ariance (Zone) Procedure ” earlier in this section. Do not operate any switches such as window , sunroof, climate controls, seats, etc. during the calibration procedure. 2. Press the vehicle information button until PRESS V TO CALIBRA TE COMP ASS displays. 3. Press the set/reset button to start the compass calibration. 4. The DIC will display CALIBRA TING: DRIVE IN CIRCLES. Drive the vehicle in tight circles at less than 5 mph (8 km/h) to complete the calibration. Th[...]

AUTOMA TIC LIGHT CONTROL OFF This message displays when the automatic headlamps are turned off. See Exterior Lamps on page 4 ‑ 9 for more information. AUTOMA TIC LIGHT CONTROL ON This message displays when the automatic headlamps are turned on. See Exterior Lamps on page 4 ‑ 9 for more information. CALIBRA TING: DRIVE IN CIRCLES This message displays when calibrating the compass. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. See DIC Compass on page 4 ‑ 42 for more information. CALIBRA TION COMPLETE This message displays when the compass calibration is complete. See DIC Compass on page 4 ‑ 42 for more information. CARGO DOOR OPEN This message di[...]

DRIVER DOOR OPEN This message displays and a chime sounds if the driver door is not fully closed and the vehicle is in a drive gear . Stop and turn off the vehicle, check the door for obstructions, and close the door again. Check to see if the message still appears on the DIC. ENGINE HOT A/C (Air Conditioning) OFF This message displays when the engine coolant becomes hotter than the normal operating temperature. See Engine Coolant T emperature Gauge on page 4 ‑ 29 . T o avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. Y ou can continue to drive your veh[...]

ENGINE OVERHEA TED STOP ENGINE Notice: If you drive your vehicle while the engine is overheating, severe engine damage may occur . If an overheat warning appears on the instrument panel cluster and/or DIC, stop the vehicle as soon as possible. See Engine Overheating on page 6 ‑ 32 for more information. This message displays and a chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature. ENGINE POWER IS REDUCED This message displays and a chime sounds when the cooling system temperature gets too hot an[...]

OIL PRESSURE LOW STOP ENGINE Notice: If you drive your vehicle while the engine oil pressure is low, severe engine damage may occur . If a low oil pressure warning appears on the Driver Information Center (DIC), stop the vehicle as soon as possible. Do not drive the vehicle until the cause of the low oil pressure is corrected. See Engine Oil on page 6 ‑ 16 for more information. This message displays if low oil pressure levels occur . Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have your vehicle serviced by your dealer/retailer . See Engine Oil on page 6 ‑ 16 . P ASSENGE[...]

SERVICE A/C SYSTEM This message displays when the electronic sensors that control the air conditioning and heating systems are no longer working. Have the climate control system serviced by your dealer/retailer if you notice a drop in heating and air conditioning efficiency . SERVICE AIR BAG This message displays if there is a problem with the airbag system. Have your dealer/retailer inspect the system for problems. See Airbag Readiness Light on page 4 ‑ 23 and Airbag System on page 2 ‑ 59 for more information. SERVICE BA TTER Y CHARGING SYSTEM On some vehicles, this message displays if there is a problem with the battery charging system. Under certain conditions, the charging system lig[...]

SERVICE THEFT DETERRENT SYSTEM This message displays when there is a problem with the theft-deterrent system. The vehicle may or may not restart so you may want to take the vehicle to your dealer/retailer before turning off the engine. See P ASS-Key ® III+ Electronic Immobilizer Operation on page 3 ‑ 20 for more information. SERVICE TIRE MONITOR SYSTEM If your vehicle has the Tire Pressure Monitor System (TPMS), this message displays if a part on the system is not working properly . The tire pressure light also flashes and then remains on during the same ignition cycle. See Tire Pressure Light on page 4 ‑ 30 . Several conditions may cause this message to appear . See Tire Pressure Monit[...]

However , you should turn StabiliT rak off if your vehicle gets stuck in sand, mud, ice, or snow and you want to rock your vehicle to attempt to free it, or if you are driving in extreme off-road conditions and require more wheel spin. See If Y our V ehicle is Stuck in Sand, Mud, Ice, or Snow on page 5 ‑ 18 . T o turn the StabiliT rak system on or off, see StabiliT rak ® System on page 5 ‑ 5 . There are several conditions that can cause this message to appear . . One condition is overheating, which could occur if StabiliT rak activates continuously for an extended period of time. . The message also displays if the brake system warning light is on. See Brake System Warning Light on page [...]

TIRE LEARNING ACTIVE If your vehicle has the Tire Pressure Monitor System (TPMS), this message displays when the system is re-learning the tire positions on your vehicle. See DIC Operation and Displays on page 4 ‑ 37 for more information. The tire positions must be re-learned after rotating the tires or after replacing a tire or sensor . See Tire Inspection and Rotation on page 6 ‑ 71 , Tire Pressure Monitor System on page 6 ‑ 67 , and Inflation - Tire Pressure on page 6 ‑ 64 for more information. TRACTION CONTROL OFF If your vehicle has StabiliT rak, this message displays when the T raction Control System (TCS) is turned off. Adjust your driving accordingly . See StabiliT rak ® Sys[...]

DIC V ehicle Customization Y our vehicle may have customization capabilities that allow you to program certain features to one preferred setting. Customization features can only be programmed to one setting on the vehicle and cannot be programmed to a preferred setting for two different drivers. All of the customization options may not be available on your vehicle. Only the options available will be displayed on the DIC. The default settings for the customization features were set when your vehicle left the factory , but may have been changed from their default state since then. The customization preferences are automatically recalled. T o change customization preferences, use the following [...]

LANGUAGE This feature allows you to select the language in which the DIC messages will appear . Press the customization button until the LANGUAGE screen appears on the DIC display . Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: ENGLISH (default): All messages will appear in English. FRANCAIS: All messages will appear in French. ESP ANOL: All messages will appear in Spanish. ARABIC: All messages will appear in Arabic. NO CHANGE: No change will be made to this feature. The current setting will remain. T o select a setting, press the set/reset button while the desired setting is displayed on[...]

AUTO DOOR UNLOCK This feature allows you to select whether or not to turn off the automatic door unlocking feature. It also allows you to select which doors and when the doors will automatically unlock. See Programmable Automatic Door Locks on page 3 ‑ 10 for more information. Press the customization button until AUTO DOOR UNLOCK appears on the DIC display . Press the set/ reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: OFF: None of the doors will automatically unlock. DRIVER A T KEY OUT : Only the driver's door will unlock when the key is taken out of the ignition. DRIVER IN P ARK: Only the drive[...]

T o select a setting, press the set/reset button while the desired setting is displayed on the DIC. REMOTE DOOR UNLOCK This feature allows you to select the type of feedback you will receive when unlocking the vehicle with the Remote Keyless Entry (RKE) transmitter . Y ou will not receive feedback when unlocking the vehicle with the RKE transmitter if the doors are open. See Remote Keyless Entry (RKE) System Operation on page 3 ‑ 4 for more information. Press the customization button until REMOTE DOOR UNLOCK appears on the DIC display . Press the set/ reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: LIG[...]

EXIT LIGHTING This feature allows you to select the amount of time you want the exterior lamps to remain on when it is dark enough outside. This happens after the key is turned from ON/RUN to LOCK/OFF . Press the customization button until EXIT LIGHTING appears on the DIC display . Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: OFF: The exterior lamps will not turn on. 10 SECONDS (default): The exterior lamps will stay on for 10 seconds. 1 MINUTE: The exterior lamps will stay on for one minute. 2 MINUTES: The exterior lamps will stay on for two minutes. NO CHANGE: No change will be made to[...]

CHIME VOLUME This feature allows you to select the volume level of the chime. Press the customization button until CHIME VOLUME appears on the DIC display . Press the set/reset button once to access the settings for this feature. Then press the customization button to scroll through the following settings: NORMAL: The chime volume will be set to a normal level. LOUD: The chime volume will be set to a loud level. NO CHANGE: No change will be made to this feature. The current setting will remain. There is no default for chime volume. The volume will stay at the last known setting. T o select a setting, press the set/reset button while the desired setting is displayed on the DIC. F ACTOR Y SETT[...]

EXIT FEA TURE SETTINGS This feature allows you to exit the feature settings menu. Press the customization button until FEA TURE SETTINGS PRESS V TO EXIT appears in the DIC display . Press the set/reset button once to exit the menu. If you do not exit, pressing the customization button again will return you to the beginning of the feature settings menu. Exiting the Feature Settings Menu The feature settings menu will be exited when any of the following occurs: . The vehicle is no longer in ON/RUN. . The trip/fuel or vehicle information DIC buttons are pressed. . The end of the feature settings menu is reached and exited. . A 40 second time period has elapsed with no selection made. Audio Syst[...]

T o minimize taking your eyes off the road while driving, do the following while the vehicle is parked: . Become familiar with the operation and controls of the audio system. . Set up the tone, speaker adjustments, and preset radio stations. For more information, see Defensive Driving on page 5 ‑ 2 . Notice: Contact your dealer/retailer before adding any equipment. Adding audio or communication equipment could interfere with the operation of the vehicle's engine, radio, or other systems, and could damage them. Follow federal rules covering mobile radio and telephone equipment. Notice: The chime signals related to safety belts, parking brake, and other functions of your vehicle operate[...]

Setting the Clock AM/FM Radio with Optional CD Player If your vehicle has an AM/FM radio with an optional CD player , it has a H button for setting the time. With these types of radios, the clock can be set with either the radio turned on or off. Set the time by following these steps: 1. Press H until the hour begins flashing on display . Press this button a second time and the minutes begin flashing on display . Press H a third time and the 12HR or 24HR time format begins flashing. 2. While either the hour or the minutes are flashing, turn the f knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. While the 12HR or 24HR time for[...]

Changing the Time and Date Default Settings Y ou can change the time default setting from 12 hours to 24 hours or change the date default setting from month/day/year to day/month/year . T o change the time or date default settings, follow these instructions: 1. Press H and then the pushbutton located under the forward arrow that is currently displayed on the radio screen until the time 12H (hour) and 24H (hour), and the date MM/DD (month and day) and DD/MM (day and month) are displayed. 2. Press the pushbutton located under the desired option. 3. Press the H button again to apply the selected default, or let the screen time out. MP3 Radio with a Six-Disc CD Player If your vehicle has a radio[...]

Changing the Time and Date Default Settings T o change the time default setting from 12 hours to 24 hours or change the date default setting from month/day/year to day/month/year . T o change the time or date default settings, follow these instructions: 1. Press the MENU button. Once the H option displays, press the pushbutton located under the forward arrow that is currently displayed on the radio screen until the 12H (hour) and 24H (hour), and the date MM/DD (month and day) and DD/MM (day and month) displays. 2. Press the pushbutton located under the desired option. 3. Press the MENU button again to apply the selected default, or let the screen time out. Radio(s) AM-FM Radio shown, Radio w[...]

Radio with CD (MP3) shown, Radio with Six-Disc CD (MP3) similar The vehicle has one of these radios as its audio system. Radio Data System (RDS) The Radio may have a Radio Data System (RDS). The RDS feature is available for use only on FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only works when the information is available. While the radio is tuned to an FM-RDS station, the station name or call letters displays. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly . If this happens, contact the radio station. Playing the Radio O (Power/V olume): Pre[...]

H (Clock) (AM-FM Radio and Radio with CD (Base)): The radio has a clock button for setting the time. With this type of radio, the clock can be set with either the radio turned on or off. See Setting the Clock on page 4 ‑ 61 for more information. Speed Compensated V olume (SCV): Radios with Speed Compensated V olume (SCV) automatically adjusts the radio volume to compensate for road and wind noise as you speed up or slow down while driving. That way , the volume level should sound about the same as you drive. T o activate SCV : 1. Set the radio volume to the desired level. 2. Press the MENU button to display the radio setup menu. 3. Press the pushbutton under the AUTO VOLUM label on the rad[...]

Setting Preset Stations If the radio does not have a F A V button, up to 18 stations (six FM1, six FM2, and six AM), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. T urn the radio on. 2. Press BAND to select FM1, FM2, or AM. 3. T une in the desired station. 4. Press and hold one of the six numbered pushbuttons for three seconds until a beep sounds. When that pushbutton is pressed and released, the station that was set, returns. 5. Repeat the Steps 2 through 4 for each pushbutton. Storing a Radio Station as a Favorite Drivers are encouraged to set up their radio station favorites while the vehicle is parked. T une to favorite stations using the preset[...]

The number of favorites pages can be setup using the MENU button. T o setup the number of favorites pages: 1. Press the MENU button to display the radio setup menu. 2. Press the pushbutton located below the F A V 1-6 label. 3. Select the desired number of favorites pages by pressing the pushbutton located below the displayed page numbers. 4. Press the F A V button, or let the menu time out, to return to the original main radio screen showing the radio station frequency labels and to begin the process of programming your favorites for the chosen amount of numbered pages. Setting the T one (Bass/T reble) (AM-FM Radio and Radio with CD (Base)) BASS/TREB Bass/T reble: T o adjust the bass or treb[...]

Adjusting the Speakers (Balance/Fade) (AM-FM Radio and Radio with CD (Base)) ` (Balance/Fade): T o adjust the balance or fade, press the ` button or the f knob until the desired speaker control label displays. T urn the f knob clockwise or counterclockwise to adjust the setting. Adjusting the Speakers (Balance/Fade) BAL/F ADE (Balance/Fade): T o adjust balance or fade, press the f knob until the speaker control labels display . Continue pressing to highlight the desired label, or press the pushbutton positioned under the desired label. T urn the f knob clockwise or counterclockwise to adjust the highlighted setting. T o quickly adjust balance or fade to the middle position, press the pushbut[...]

Playing a CD(s) (Six-Disc CD Player) LOAD ^ : Press to load CDs into the CD player . This CD player holds up to six CDs. T o insert one CD, do the following: 1. Press and release the ^ button. 2. Wait for the message to insert the disc. 3. Load a CD. Insert the CD partway into the slot, label side up. The player pulls the CD in. T o insert multiple CDs, do the following: 1. Press and hold the ^ button for two seconds. A beep sounds and Load All Discs displays. 2. Follow the displayed instruction on when to insert the discs. The CD player takes up to six CDs. 3. Press the ^ button again to cancel loading more CDs. Insert a CD partway into the slot, label side up. The player pulls it in and th[...]

Care of Y our CD and DVD Player Do not add any label to a CD, it could get caught in the CD or DVD player . If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a marking pen. The use of CD lens cleaners for CDs is not advised, due to the risk of contaminating the lens of the CD optics with lubricants internal to the CD and DVD player mechanism. Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged. While using the CD player , use only CDs in good condition without any label, load one CD at a time,[...]

RDM (Random): T racks can be listened to in random, rather than sequential order , on one CD or all CDs in a six-disc CD player . T o use random on the Base Radio with Single CD player , do the following: . Press the RDM button to play tracks from a CD in random order . The random icon displays. Press again to turn off random play . The random icon disappears from the display . T o use random on an Uplevel Radio with a Single CD player , do the following: 1. Press the CD/AUX button, insert a disc partway into the slot of the CD player. A RDM label displays. 2. T o play the tracks in random order , press the pushbutton positioned under the RDM label until Random Current Disc displays. Press t[...]

4 (Information) (Base Radio with CD): Press to switch the display between the track number , elapsed time of the track, and the time. When the ignition is off, press to display the time. BAND: Press to listen to the radio when a CD is playing. The CD remains inside the radio for future listening. CD/AUX (CD/Auxiliary): Press to play a CD when listening to the radio. The CD icon and a message showing the disc and/or track number displays when a CD is in the player . Press again and the system automatically searches for an auxiliary input device, such as a portable audio player . If a portable audio player is not connected, “ No Input Device Found ” may display . Playing an MP3 CD-R or CD-[...]

NO: This message displays if the EJECT or CD/AUX buttons are pressed and a CD has not been inserted into the player . If the CD is not playing correctly , for any other reason, try a known good CD. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer/retailer . If the radio displays an error message, write it down and provide it to your dealer/retailer while reporting the problem. Using the Auxiliary Input Jack Y our radio system has an auxiliary input jack located on the lower right side of the faceplate. This is not an audio output; do not plug the headphone set into the front auxiliary input jack. An external audio device such as an iPod, laptop computer [...]

Using an MP3 MP3 CD-R or CD-RW Disc The radio plays MP3 files that were recorded on a CD-R or CD-RW disc. The files can be recorded with the following fixed bit rates: 32 kbps, 40 kbps, 56 kbps, 64 kbps, 80 kbps, 96 kbps, 1 12 kbps, 128 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps, and 320 kbps or a variable bit rate. Song title, artist name, and album are available for display by the radio when recorded using ID3 tags version 1 and 2. Compressed Audio The radio also plays discs that contain both uncompressed CD audio (.CDA files) and MP3 files. By default the radio shows the MP3 label on the left side of the screen but plays both file formats in the order in which they were recorded to the [...]

Playlists can be changed by using the S c (previous) and c T (next) folder buttons, the f knob, or the © SEEK ¨ arrows. Y ou can also play an MP3 CD-R or CD-RW that was recorded using no file folders. If a CD-R or CD-RW contains more than the maximum of 50 folders, 15 playlists, and 512 folders and files, the player lets you access and navigate up to the maximum, but all items over the maximum are not accessible. Root Directory The root directory of the CD-R or CD-RW is treated as a folder . If the root directory has compressed audio files, the directory displays as the CD label. All files contained directly under the root directory are accessed prior to any root directory folders. However[...]

Order of Play T racks recorded to the CD-R or CD-RW are played in the following order: . Play begins from the first track in the first playlist and continues sequentially through all tracks in each playlist. When the last track of the last playlist has played, play continues from the first track of the first playlist. . Play begins from the first track in the first folder and continues sequentially through all tracks in each folder . When the last track of the last folder has played, play continues from the first track of the first folder . When play enters a new folder , the display does not automatically show the new folder name unless you have chosen the folder mode as the default display[...]

As each new track starts to play , the track number and song title displays. Z EJECT : Press this button to eject CD-R(s) or CD-RW(s). T o eject the CD-R or CD-RW that is currently playing, press and release this button. A beep sounds and Ejecting Disc displays. Once the disc is ejected, Remove Disc displays. The CD-R or CD-RW can be removed. If the CD-R or CD-RW is not removed, after several seconds, the CD-R or CD-RW automatically pulls back into the player and begins playing. For the Six-Disc CD player , press and hold this button for two seconds to eject all discs. f (T une): Turn this knob to select MP3 files on the CD-R or CD-RW currently playing. © SEEK ¨ : Press the left SEEK arrow[...]

h (Music Navigator): Use the music navigator feature to play MP3 files on the CD-R or CD-RW in order by artist or album. Press the pushbutton located below the music navigator label. The player scans the disc to sort the files by artist and album ID3 tag information. It could take several minutes to scan the disc depending on the number of MP3 files recorded to the CD-R or CD-RW . The radio can begin playing while it is scanning the disc in the background. When the scan is finished, the CD-R or CD-RW begins playing again. Once the disc has scanned, the player defaults to playing MP3 files in order by artist. The current artist playing is shown on the second line of the display between the ar[...]

Theft-Deterrent Feature Non-RDS Radios THEFTLOCK ® is designed to discourage theft of your vehicle's radio. The feature works automatically by learning a portion of the V ehicle Identification Number (VIN). If the radio is moved to a different vehicle, it does not operate and LOC displays. With THEFTLOCK ® activated, the radio does not operate if stolen. RDS Radios THEFTLOCK ® is designed to discourage theft of your vehicle's radio. The feature works automatically by learning a portion of the V ehicle Identification Number (VIN). If the radio is moved to a different vehicle, it does not operate and LOCKED displays. When the radio and vehicle are turned off, the blinking red ligh[...]

g (Mute): Press this button to silence the system. Press this button again, to turn the sound on. SRCE (Source): Press this button to switch between the radio, CD, and auxiliary input jack. + e − e (V olume): Press the plus or minus volume button to increase or to decrease the volume. ¨ (Seek): Press the seek arrow to go to the next radio station while in AM or FM. Press the seek arrow to go to the next track while sourced to the CD. Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interfere[...]

Section 5 Driving Y our V ehicle Y our Driving, the Road, and the Vehicle . . . . . . . . . . 5-2 Defensive Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 D r u n k D r i v i n g ... ................................ 5 - 2 Control of a V ehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 B r a k i n g ... ...................................... 5 - 3 Antilock Brake System (ABS) . . . . . . . . . . . . . . . . . . . 5-4 Braking in Emergencies . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 StabiliT rak ® S y s t e m ............................. 5 - 5 Locking Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 All-Wheel D[...]

Y our Driving, the Road, and the V ehicle Defensive Driving Defensive driving means “ always expect the unexpected. ” The first step in driving defensively is to wear your safety belt — See Safety Belts: They Are for Everyone on page 2 ‑ 10 . { W ARNING: Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready . In addition: . Allow enough following distance between you and the driver in front of you. . Focus on the task of driving. Driver distraction can cause collisions resulting in injury or possible death. These simple defensive driving techniques could save your life. Drunk Dr[...]

For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological, and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive. Medical research shows that alcohol in a person's system can make crash injuries worse, especially injuries to the brain, spinal cord, or heart. This means that when anyone who has been drinking — driver or passenger — is in a crash, that person's chance of being killed or permanently disabled is higher than if the person had not been drinking. Control of a V ehicle The following three systems help to c[...]

Avoid needless heavy braking. Some people drive in spurts, heavy acceleration followed by heavy braking, rather than keeping pace with traffic. This is a mistake. The brakes might not have time to cool between hard stops. The brakes will wear out much faster with a lot of heavy braking. Keeping pace with the traffic and allowing realistic following distances eliminates a lot of unnecessary braking. That means better braking and longer brake life. If the engine ever stops while the vehicle is being driven, brake normally but do not pump the brakes. If the brakes are pumped, the pedal could get harder to push down. If the engine stops, there will still be some power brake assist but it will be[...]

ABS can change the brake pressure to each wheel, as required, faster than any driver could. This can help the driver steer around the obstacle while braking hard. As the brakes are applied, the computer keeps receiving updates on wheel speed and controls braking pressure accordingly . Remember: ABS does not change the time needed to get a foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, there will not be enough time to apply the brakes if that vehicle suddenly slows or stops. Always leave enough room up ahead to stop, even with ABS. Using ABS Do not pump the brakes. Just hold the brake pedal down firmly and let antilock wor[...]

Press and hold the StabiliT rak button located on the instrument panel for more than five seconds to turn off StabiliT rak and part of the traction control system. The StabiliT rak light comes on the instrument panel cluster when the system is turned off or requires service. For more information, see StabiliT rak ® Indicator Light on page 4 ‑ 29 . For your safety , the system can only be disabled when the vehicle speed is less than 20 mph (32 km/h). Three chimes will be heard and the StabiliT rak light comes on. T o turn on the StabiliTrak system, press the StabiliT rak button again. StabiliT rak will automatically turn back on when the vehicle speed exceeds 20 mph (32 km/h). One chime is[...]

StabiliT rak System Operation The StabiliT rak system is normally on, except when the system is initializing or has been disabled with the StabiliT rak button. The StabiliTrak system will automatically activate to assist the driver in maintaining vehicle directional control in most driving conditions. When activated, the StabiliT rak system may reduce engine power to the wheels and apply braking to individual wheels as necessary to assist the driver with vehicle directional control. If cruise control is being used when StabiliTrak activates, the cruise control automatically disengages. The cruise control can be re-engaged when road conditions allow . See Cruise Control on page 4 ‑ 6 . The [...]

Locking Rear Axle V ehicles with a locking rear axle can give more traction on snow , mud, ice, sand or gravel. It works like a standard axle most of the time, but when traction is low , this feature will allow the rear wheel with the most traction to move the vehicle. All-Wheel Drive (A WD) System If the vehicle has this feature, engine power is sent to all four wheels when extra traction is needed. This is like four-wheel drive, but there is no separate lever or switch to engage or disengage the front axle. It is fully automatic, and adjusts itself as needed for road conditions. Steering Power Steering If power steering assist is lost because the engine stops or the system is not functioni[...]

Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you. These problems can be avoided by braking — if you can stop in time. But sometimes you cannot stop in time because there is no room. That is the time for evasive action — steering around the problem. The vehicle can perform very well in emergencies like these. First apply the brakes. See Braking on page 5 ‑ 3 . It is better to remove as much speed as possible from a collision. Then steer around the problem, [...]

Off-Road Recovery The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy . Ease off the accelerator and then, if there is nothing in the way , steer so that the vehicle straddles the edge of the pavement. T urn the steering wheel 8 to 13 cm (3 to 5 inches), about one-eighth turn, until the right front tire contacts the pavement edge. Then turn the steering wheel to go straight down the roadway . Passing Passing another vehicle on a two-lane road can be dangerous. T o reduce the risk of danger while passing: . Look down the road, to the sides, and to cross[...]

Skidding In a skid, a driver can lose control of the vehicle. Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible. The three types of skids correspond to the vehicle's three control systems. In the braking skid, the wheels are not rolling. In the steering or cornering skid, too much speed or steering in a curve causes tires to slip and lose cornering force. And in the acceleration skid, too much throttle causes the driving wheels to spin. If the vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. If you start s[...]

Driving at Night Night driving is more dangerous than day driving because some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Night driving tips include: . Drive defensively . . Do not drink and drive. . Reduce headlamp glare by adjusting the inside rearview mirror . . Slow down and keep more space between you and other vehicles because headlamps can only light up so much road ahead. . W atch for animals. . When tired, pull off the road. . Do not wear sunglasses. . Avoid staring directly into approaching headlamps. . Keep the windshield and all glass on your vehicle clean — inside and out. . Keep your eyes moving, especially during tur[...]

Driving in Rain and on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep ‐ standing or flowing water . { W ARNING: Wet brakes can cause crashes. They might not work as well in a quick stop and could cause pulling to one side. Y ou could lose control of the vehicle. After driving through a large puddle of water or a car/vehicle wash, lightly apply the brake pedal until the brakes work normally . Flowing or rushing water creates strong forces. Driving through flowing water could cause your vehicle to be carried away . If this happens[...]

Before Leaving on a Long T rip T o prepare your vehicle for a long trip, consider having it serviced by your dealer/retailer before departing. Things to check on your own include: . Windshield Washer Fluid: Reservoir full? Windows clean — inside and outside? . Wiper Blades: In good shape? . Fuel, Engine Oil, Other Fluids: All levels checked? . Lamps: Do they all work and are lenses clean? . Tires: Are treads good? Are tires inflated to recommended pressure? . Weather and Maps: Safe to travel? Have up-to-date maps? Highway Hypnosis Always be alert and pay attention to your surroundings while driving. If you become tired or sleepy , find a safe place to park your vehicle and rest. Other driv[...]

Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: . Keep the vehicle serviced and in good shape. . Check all fluid levels and brakes, tires, cooling system, and transmission. . Going down steep or long hills, shift to a lower gear . { W ARNING: If you do not shift down, the brakes could get so hot that they would not work well. Y ou would then have poor braking or even none going down a hill. Y ou could crash. Shift down to let the engine assist the brakes on a steep downhill slope. { W ARNING: Coasting downhill in N (Neutral) or with the ignition off is dangerous. The brakes[...]

Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction. Avoid driving on wet ice or in freezing rain until roads can be treated with salt or sand. Drive with caution, whatever the condition. Accelerate gently so traction is not lost. Accelerating too quickly causes the wheels to spin and makes the surface under the tires slick, so there is even less traction. T ry not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even mor[...]

Blizzard Conditions Being stuck in snow can be in a serious situation. Stay with the vehicle unless there is help nearby . If possible, use the Roadside Assistance Program on page 8 ‑ 8 . T o get help and keep everyone in the vehicle safe: . T urn on the Hazard Warning Flashers on page 4 ‑ 3 . . T ie a red cloth to an outside mirror . { W ARNING: Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle is stuck in the snow: . Clear away snow from around the base of your vehicle, especially any that is blocking the exh[...]

Run the engine for short periods only as needed to keep warm, but be careful. T o save fuel, run the engine for only short periods as needed to warm the vehicle and then shut the engine off and close the window most of the way to save heat. Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps. If it takes some time for help to arrive, now and then when you run the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed. This keeps the battery charged to restart the vehicle and to signal for help with the headlamps. Do this as little as possible to save fuel. If Y our V ehicle is Stuck [...]

Rocking Y our V ehicle to Get It Out T urn the steering wheel left and right to clear the area around the front wheels. T urn off any traction or stability system. Shift back and forth between R (Reverse) and a forward gear , spinning the wheels as little as possible. T o prevent transmission wear , wait until the wheels stop spinning before shifting gears. Release the accelerator pedal while shifting, and press lightly on the accelerator pedal when the transmission is in gear . Slowly spinning the wheels in the forward and reverse directions causes a rocking motion that could free the vehicle. If that does not get the vehicle out after a few tries, it might need to be towed out. If the vehi[...]

Tire and Loading Information Label Label Example A vehicle specific T ire and Loading Information label is attached to the center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post (striker). The tire and loading information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds. The T ire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 6 ‑ 56 and Inflation - Tire Pressure on page 6 ‑ 64 . There is also important [...]

Steps for Determining Correct Load Limit 1. Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs ” on your vehicle's placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if the “ XXX ” amount equals 1400 lbs and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 − 750 (5 x 150) = 650 lbs). 5. Determine the combined[...]

Example 1 Item Description T otal A V ehicle Capacity Weight for Example 1 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 150 lbs (68 kg) × 2 = 300 lbs (136 kg) C Available Occupant and Cargo Weight = 700 lbs (317 kg) Example 2 Item Description T otal A V ehicle Capacity Weight for Example 2 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 150 lbs (68 kg) × 5 = 750 lbs (136 kg) C Available Cargo Weight = 250 lbs (1 13 kg) 5-22[...]

Example 3 Item Description T otal A V ehicle Capacity Weight for Example 3 = 1,000 lbs (453 kg) B Subtract Occupant Weight @ 200 lbs (91 kg) × 5 = 1000 lbs (453 kg) C Available Cargo Weight = 0 lbs (0 kg) Refer to your vehicle's tire and loading information label for specific information about your vehicle's capacity weight and seating positions. The combined weight of the driver , passengers, and cargo should never exceed your vehicle's capacity weight. 5-23[...]

Certification/Tire Label A vehicle specific Certification/T ire label is found on the rear edge of the driver door . The label shows the size of your vehicle's original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle. This is called Gross V ehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo. The Certification/Tire label also tells you the maximum weights for the front and rear axles, called Gross Axle Weight Rating (GA WR). T o find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle. Y our dealer can help you with this. Be sure to sp[...]

{ W ARNING: Do not load the vehicle any heavier than the Gross V ehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GA WR). If you do, parts on the vehicle can break, and it can change the way the vehicle handles. These could cause you to lose control and crash. Also, overloading can shorten the life of the vehicle. { W ARNING: Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. . Put things in the cargo area of your vehicle. T ry to spread the weight evenly . . Never stack heavier things, like suitcases, inside the vehicle so that some of them are above the tops of the seats. . Do not leave an unsec[...]

Add-On Equipment When you carry removable items, you may need to put a limit on how many people you carry inside your vehicle. Be sure to weigh your vehicle before you buy and install the new equipment. T owing T owing Y our V ehicle T o avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Consult your dealer/ retailer or a professional towing service if the disabled vehicle must be towed. See Roadside Assistance Program on page 8 ‑ 8 . T o tow the vehicle behind another vehicle for recreational purposes, such as behind a motorhome, see “ Recreational V ehicle T owing ” following. Recreational V ehicle T owing Recreational vehicle towing means towing [...]

Here are some important things to consider before recreational vehicle towing: . What is the towing capacity of the towing vehicle? Be sure to read the tow vehicle manufacturer's recommendations. . What is the distance that will be travelled? Some vehicles have restrictions on how far and how long they can tow . . Is the proper towing equipment going to be used? See your dealer/retailer or trailering professional for additional advice and equipment recommendations. . Is the vehicle ready to be towed? Just as preparing the vehicle for a long trip, make sure the vehicle is prepared to be towed. See Before Leaving on a Long T rip on page 5 ‑ 14 . Dinghy T owing T wo-Wheel ‐ Drive V ehi[...]

All ‐ Wheel ‐ Drive V ehicles The vehicle was not designed to be towed with all four wheels on the ground. T o properly tow these vehicles, they should be placed on a platform trailer with all four wheels off the ground. Notice: T owing an all-wheel-drive vehicle with all four wheels on the ground, or even with only two of its wheels on the ground, will damage drivetrain components. Do not tow an all-wheel-drive vehicle with any of its wheels on the ground. Dolly T owing Rear T owing (Rear Wheels Off the Ground) T wo ‐ Wheel ‐ Drive V ehicles Use the following procedure to tow the vehicle from the rear: 1. Attach the dolly to the tow vehicle following the dolly manufacturer's in[...]

3. Firmly set the parking brake. See Parking Brake on page 3 ‑ 38 for more information. 4. Put the transmission in P (Park). 5. Secure the vehicle to the dolly following the manufacturer's instructions. 6. Use an adequate clamping device designed for towing to ensure that the front wheels are locked into the straight position. 7. T urn the ignition to LOCK/OFF . If the tow vehicle will not be started or driven for six weeks or more, remove the battery cable from the negative terminal (post) of the battery to prevent the battery from draining while towing. All ‐ Wheel ‐ Drive V ehicles The vehicle was not designed to be towed with two wheels on the ground. T o properly tow these ve[...]

T owing a T railer If the vehicle has a diesel engine, see the DURAMAX ® Diesel manual for more information. { W ARNING: The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly . For example, if the trailer is too heavy , the brakes may not work well — or even at all. The driver and passengers could be seriously injured. The vehicle may also be damaged; the resulting repairs would not be covered by the vehicle warranty . Pull a trailer only if all the steps in this section have been followed. Ask your dealer/retailer for advice and information about towing a trailer with the vehicle. Notice: Pulling a trailer improperly[...]

Pulling A T railer Here are some important points: . There are many different laws, including speed limit restrictions, having to do with trailering. Make sure the rig will be legal, not only where you live but also where you will be driving. A good source for this information can be state or provincial police. . Consider using a sway control. See “ Hitches ” later in this section. . Do not tow a trailer at all during the first 500 miles (800 km) the new vehicle is driven. The engine, axle or other parts could be damaged. . Then, during the first 500 miles (800 km) that a trailer is towed, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine a[...]

Use the following chart to determine how much the vehicle can weigh, based upon the vehicle model and options. V ehicle Axle Ratio Maximum T railer Wei ght GCWR* G1500 Cargo V an 2WD 4.3L V6 3.42 4,400 lbs (1 996 kg) 9,500 lbs (4 309 kg) 5.3L V8 3.42 3.73 6,700 lbs (3 039 kg) 12,000 lbs (5 443 kg) H1500 Cargo V an A WD 5.3L V8 3.42 6,500 lbs (2 948 kg) 12,000 lbs (5 443 kg) G1500 Passenger V an 2WD 5.3L V8 3.73 6,200 lbs (2 812 kg) 12,000 lbs (5 443 kg) H1500 Passenger V an AWD 5.3L V8 3.73 6,000 lbs (2 722 kg) 12,000 lbs (5 443 kg) G2500 Cargo V an 2WD Short Wheelbase 4.8L V8 3.73 4.10 6,400 lbs (2 903 kg) 7,400 lbs (3 357 kg) 12,000 lbs (5 443 kg) 13,000 lbs (5 897 kg) 6.0L V8 3.73 4.10 8,[...]

V ehicle Axle Ratio Maximum T railer Wei ght GCWR* G2500 Passenger V an 2WD Short Wheelbase 6.0L V8 3.73 7,600 lbs (3 447 kg) 14,000 lbs (6 350 kg) 6.0L V8 4.10 9,600 lbs (4 355 kg) 16,000 lbs (7 257 kg) G3500 Cargo V an 2WD Short Wheelbase 4.8L V8 3.73 4.10 6,400 lbs (2 903 kg) 7,400 lbs (3 295 kg) 12,000 lbs (5 443 kg) 13,000 lbs (5 897 kg) 6.0L V8 3.73 4.10 8,400 lbs (3 810 kg) 10,000 lbs (4 536 kg) 14,000 lbs (6 350 kg) 16,000 lbs (7 257 kg) G3500 Cargo V an 2WD Long Wheelbase 4.8L V8 3.73 4.10 6,100 lbs (2 767 kg) 7,100 lbs (3 221 kg) 12,000 lbs (5 443 kg) 13,000 lbs (5 897 kg) 6.0L V8 3.73 4.10 8,200 lbs (3 719 kg) 10,000 lbs (4 536 kg) 14,000 lbs (6 350 kg) 16,000 lbs (7 257 kg) G3500[...]

Weight of the T railer T ongue The tongue load (A) of any trailer is an important weight to measure because it affects the total gross weight of the vehicle. The Gross V ehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle. If there are a lot of options, equipment, passengers or cargo in the vehicle, it will reduce the tongue weight the vehicle can carry , which will also reduce the trailer weight the vehicle can tow . If towing a trailer , the tongue load must be added to the GVW because the vehicle will be carrying that weight, too. See Loading the Vehicle on page 5 ‑ 19 for more information about the vehic[...]

Do not exceed the maximum allowable tongue weight for the vehicle. Choose the shortest hitch extension that will position the hitch ball closest to the vehicle. This will help reduce the effect of trailer tongue weight on the rear axle. After loading the trailer , weigh the trailer and then the tongue, separately , to see if the weights are proper . If they are not, adjustments might be made by moving some items around in the trailer . T railering may be limited by the vehicle's ability to carry tongue weight. T ongue weight cannot cause the vehicle to exceed the GVWR (Gross V ehicle Weight Rating) or the RGA WR (Rear Gross Axle Weight Rating). The effect of additional weight may reduce[...]

If the vehicle has many options and there is a front seat passenger and two rear seat passengers with some luggage and gear in the vehicle as well. 300 lbs (136 kg) could be added to the front axle weight and 400 lbs (181 kg) to the rear axle weight. The vehicle now weighs: Weight is still below 7,200 lbs (3 266 kg) and you might think 700 additional pounds (318 kg) should be subtracted from the trailering capacity to stay within GCWR limits. The maximum trailer would only be 7,800 lbs (3 538 kg). Y ou may go further and think the tongue weight should be limited to less than 1,000 lbs (454 kg) to avoid exceeding GVWR. But the effect on the rear axle must still be considered. Because the rear[...]

Weight ‐ Distributing Hitches and Weight Carrying Hitches A: Body to Ground Distance B: Front of V ehicle When using a weight-distributing hitch, the hitch must be adjusted so the distance (A) remains the same both before and after coupling the trailer to the tow vehicle. If a step-bumper hitch will be used, the bumper could be damaged in sharp turns. Make sure there is ample room when turning to avoid contact between the trailer and the bumper . If the loaded trailer being pulled will weigh more than 5,000 lbs (2 270 kg), be sure to use a properly mounted weight-distributing hitch and sway control of the proper size. This equipment is very important for proper vehicle loading and good han[...]

T ow/Haul Mode Pressing this button at the end of the shift lever turns on and off the tow/haul mode. This indicator light on the instrument panel cluster comes on when the tow/haul mode is on. T ow/Haul is a feature that assists when pulling a heavy trailer or a large or heavy load. See T ow/Haul Mode on page 3 ‑ 36 for more information. T ow/Haul is designed to be most effective when the vehicle and trailer combined weight is at least 75 percent of the vehicle's Gross Combined Weight Rating (GCWR). See “ Weight of the T railer ” later in the section. T ow/Haul is most useful under the following driving conditions: . When pulling a heavy trailer or a large or heavy load through r[...]

Driving with a T railer { W ARNING: When towing a trailer , exhaust gases may collect at the rear of the vehicle and enter if the liftgate, trunk/hatch, or rear-most window is open. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. T o maximize safety when towing a trailer: . Have the exhaust system inspected for leaks and make necessary repairs before starting a trip. . Never drive with the liftgate, trunk/hatch, or rear-most window open. . Fully open the air outlets on or under the instrument panel. . Adjust the Climate Control system to a setting that brings in only outside air and set the fan speed to the highest se[...]

Passing More passing distance is needed when towing a trailer . Because the rig is longer , it is necessary to go much farther beyond the passed vehicle before returning to the lane. Backing Up Hold the bottom of the steering wheel with one hand. Then, to move the trailer to the left, move that hand to the left. T o move the trailer to the right, move your hand to the right. Always back up slowly and, if possible, have someone guide you. Making T urns Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. When turning with a trailer , make wider turns than norm[...]

while parked, preferably on level ground, with the automatic transmission in P (Park) for a few minutes before turning the engine off. If the overheat warning comes on, see Engine Overheating on page 6 ‑ 32 . Parking on Hills { W ARNING: Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface. If parking the rig on a hill: 1. Press the brake pedal, but do not shift the transmission into P (Park) yet. T urn the wheels into the curb if facing downhill or into traffic if facing uphill. 2. Have s[...]

T railer Wiring Harness The optional heavy-duty trailer wiring package includes a wiring harness, with a seven-pin connector at the rear of the vehicle and a four-wire harness assembly under the driver side of the instrument panel. The four-wire harness assembly comes without a connector . If the vehicle does not have a trailer hitch, the seven-wire harness assembly with connector is taped together and located in a frame pocket at the driver side rear left corner of the frame. If the vehicle has a trailer hitch, the seven-wire harness assembly with connector is attached to a bracket on the hitch platform. In both cases, the seven-wire harness has a connector and includes a 30-amp feed wire. [...]

Section 6 Service and Appearance Care Service ......... ........................... ......... 6-4 Accessories and Modifications . . . . . . . . . . . . . . . . . . 6-4 California Proposition 65 Warning . . . . . . . . . . . . . . . 6-5 California Perchlorate Materials R e q u i r e m e n t s ................................. 6 - 5 Doing Y our Own Service Work . . . . . . . . . . . . . . . . . . 6-5 Adding Equipment to the Outside of the V ehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Fuel .............................................. ... 6-6 Gasoline Octane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Gasoline Specification[...]

Section 6 Service and Appearance Care All-Wheel Drive ................................... 6-44 Rear Axle ................... ................... ... 6-45 Front Axle ......................................... 6-46 Noise Control System ............................ 6-46 T ampering with Noise Control System Prohibited . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46 Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48 Halogen Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48 H e a d l a m p s .................................... 6 - 4 8 Front T urn Signal, Sidemarker and Parking L a m p s .......................[...]

Section 6 Service and Appearance Care Appearance Care ................................. 6-98 Interior Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-98 Fabric/Carpet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-99 Instrument Panel, Vinyl, and Other Plastic Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-100 Care of Safety Belts . . . . . . . . . . . . . . . . . . . . . . . . . . 6-101 Weatherstrips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-101 W ashing Y our V ehicle . . . . . . . . . . . . . . . . . . . . . . . . 6-101 Cleaning Exterior Lamps/Lenses . . . . . . . . . . . . . 6-102 F i n[...]

Service For service and parts needs, visit your dealer/retailer . Y ou will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: Accessories and Modifications When non ‐ dealer/non ‐ retailer accessories are added to the vehicle, they can affect vehicle performance and safety , including such things as airbags, braking, stability , ride and handling, emissions systems, aerodynamics, durability , and electronic systems like antilock brakes, traction control, and stability control. Some of these accessories could even cause malfunction or damage not covered by the vehicle warranty . Damage to vehicle components resulting from the i[...]

California Proposition 65 W arning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals. California Perchlorate Materials Requirements Certain types of automotive applications, such as airbag initiators, seat belt pretensioners, and lithium batteries contained in remote keyless transmitters, may contain perchlorate materials. Special handling may be necessary . For additional information, see www .dtsc.ca.gov/hazardouswaste/perchlorate. Doing Y our Own Servi[...]

Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 7 ‑ 15 . Adding Equipment to the Outside of the V ehicle Things added to the outside of the vehicle can affect the airflow around it. This can cause wind noise and can affect fuel economy and windshield washer performance. Check with your dealer/retailer before adding equipment to the outside of the vehicle. Fuel For diesel engine vehicles, see “ Diesel Fuel Requirements and Fuel System ” in the DURAMAX ® Diesel manual. For vehicles with gasoline engines, please read this. Gasoline Use of the recommended fuel is an important part of the proper maintenan[...]

If the vehicle has the 4.8L V8 engine (VIN Code A), the 5.3L V8 engine (VIN Code 4), or the 6.0L V8 engine (VIN Code G) and the N15 flexible fuel option, you can use either regular unleaded gasoline or ethanol fuel containing up to 85% ethanol (E85). See Fuel E85 (85% Ethanol) on page 6 ‑ 8 . For all other gasoline engines, use only regular unleaded gasoline. Gasoline Octane Use regular unleaded gasoline with a posted octane rating of 87 or higher . If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when driving. If this occurs, use a gasoline rated at 87 octane or higher as soon as possible. If heavy knocking is heard when [...]

experiences problems due to dirty injectors or valves, look for gasoline that is advertised as TOP TIER Detergent Gasoline. For customers who do not use TOP TIER Detergent Gasoline regularly , one bottle of GM Fuel System T reatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System T reatment PLUS is the only gasoline additive recommended by General Motors. Also, your dealer/retailer has additives that will help correct and prevent most deposit ‐ related problems. Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines might be available in your area. We recommend that you u[...]

Only vehicles that have the 4.8L V8 engine (VIN Code A), the 5.3L V8 engine (VIN Code 4), or the 6.0L V8 engine (VIN Code G) and the N15 flexible fuel option can use 85% ethanol fuel (E85). We encourage the use of E85 in vehicles that are designed to use it. The ethanol in E85 is a “ renewable ” fuel, meaning it is made from renewable sources such as corn and other crops. Many service stations will not have an 85% ethanol fuel (E85) pump available. The U.S. Department of Energy has an alternative fuels website (www .eere.energy .gov/afdc/infrastructure/locator .html) that can help you find E85 fuel. Those stations that do have E85 should have a label indicating ethanol content. Do not us[...]

Fuels in Foreign Countries If you plan on driving in another country outside the United States or Canada, the proper fuel might be hard to find. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel would not be covered by the vehicle warranty . T o check the fuel availability , ask an auto club, or contact a major oil company that does business in the country where you will be driving. Filling the T ank { W ARNING: Fuel vapor burns violently and a fuel fire can cause bad injuries. T o help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when r[...]

While refueling, hang the tethered fuel cap from the hook on the fuel door . { W ARNING: Fuel can spray out on you if you open the fuel cap too quickly . If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if the tank is nearly full, and is more likely in hot weather . Open the fuel cap slowly and wait for any hiss noise to stop. Then unscrew the cap all the way . Be careful not to spill fuel. Do not top off or overfill the tank and wait a few seconds after you have finished pumping before removing the nozzle. Clean fuel from painted surfaces as soon as possible. See Washing Y our V ehicle on page 6 ‑ 101 . When replacing the fuel cap, turn it [...]

Filling a Portable Fuel Container { W ARNING: Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor . Y ou can be badly burned and the vehicle damaged if this occurs. T o help avoid injury to you and others: . Dispense fuel only into approved containers. . Do not fill a container while it is inside a vehicle, in a vehicle's trunk, pickup bed, or on any surface other than the ground. . Bring the fill nozzle in contact with the inside of the fill opening before operating the nozzle. Contact should be maintained until the filling is complete. . Do not smoke while pumping fuel. . Do not use a cellular phone[...]

Hood Release T o open the hood: 1. Pull the handle with this symbol on it. It is located in front of the driver's side door frame near the floor . 2. Then go to the front of the vehicle and lift up the secondary hood release, which is located underneath the middle of the hood. 3. Lift the hood, release the hood prop from its retainer and put the hood prop into the slot in the hood. If your vehicle has an underhood lamp, it will automatically come on and stay on until the hood is closed. Before closing the hood, be sure all of the filler caps are on properly . Then lift the hood to relieve pressure on the hood prop. Remove the hood prop from the slot in the hood and return the prop to it[...]

Engine Compartment Overview If the vehicle has a diesel engine, see the maintenance schedule section in the DURAMAX ® Diesel manual. When the hood is lifted: 6-14[...]

A. Battery . See Battery on page 6 ‑ 39 . B. Radiator Pressure Cap. See Cooling System on page 6 ‑ 26 . C. Coolant Recovery T ank. See Cooling System on page 6 ‑ 26 . D. Automatic Transmission Fluid Dipstick. See “ Checking the Fluid Level ” under Automatic T ransmission Fluid (4-Speed T ransmission) on page 6 ‑ 20 or Automatic T ransmission Fluid (6-Speed T ransmission) on page 6 ‑ 23 . E. Engine Oil Fill Cap. See “ When to Add Engine Oil ” under Engine Oil on page 6 ‑ 16 . F . Engine Oil Dipstick. See “ Checking Engine Oil ” under Engine Oil on page 6 ‑ 16 . G. Engine Air Cleaner/Filter . See Engine Air Cleaner/ Filter on page 6 ‑ 19 . H. Power Steering Fluid Re[...]

Engine Oil For diesel engine vehicles, see “ Engine Oil ” in the DURAMAX ® Diesel manual. Checking Engine Oil It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engine Compartment Overview on page 6 ‑ 14 for the location of the engine oil dipstick. 1. T urn off the engine and give the oil several minutes to drain back into the oil pan. If this is not done, the oil dipstick might not show the actual level. 2. Pull out the dipstick and clean it with a paper towel or cloth, then push it back in all the way . Remove it agai[...]

See Engine Compartment Overview on page 6 ‑ 14 for the location of the engine oil fill cap. Add enough oil to put the level somewhere in the proper operating range. Push the dipstick all the way back in when through. What Kind of Engine Oil to Use Look for three things: . GM6094M Use only an oil that meets GM Standard GM6094M. . SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity , or thickness. Do not use other viscosity oils such as SAE 20W-50. . American Petroleum Institute (API) starburst symbol Oils meeting these requirements should have the starburst symbol on the container . This symbol indicates that the oil has been certified by the Am[...]

Engine Oil Additives / Engine Oil Flushes Do not add anything to the oil. The recommended oils with the starburst symbol that meet GM Standard GM6094M are all that is needed for good performance and engine protection. Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty . Engine Oil Life System When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter . This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably . For the oil life system to work properly , th[...]

T o reset the CHANGE ENGINE OIL SOON message: 1. T urn the ignition key to ON/RUN with the engine off. 2. Fully press and release the accelerator pedal slowly three times within five seconds. 3. T urn the key to LOCK/OFF . If the message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure. If it still does not reset, see your dealer/ retailer for service. What to Do with Used Oil Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer . Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water , or a good hand cleaner . W ash or properly dispose of [...]

When to Inspect the Engine Air Cleaner/ Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 50,000 mile (80 000 km) interval. See Scheduled Maintenance on page 7 ‑ 3 for more information. If you are driving in dusty/dirty conditions, inspect the filter at each engine oil change. How to Inspect the Engine Air Cleaner/ Filter T o inspect the air cleaner/filter , remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains caked with dirt, a new filter is required. Never use compressed air to clean the filter . T o inspect or replace the engine air cleaner/filter , do t[...]

When to Check and Change Automatic T ransmission Fluid A good time to check your automatic transmission fluid level is when the engine oil is changed. Change the fluid and filter at the intervals listed in Scheduled Maintenance on page 7 ‑ 3 , and be sure to use the transmission fluid listed in Recommended Fluids and Lubricants on page 7 ‑ 1 1 . How to Check Automatic T ransmission Fluid Because this operation can be a little difficult, you may choose to have this done at the dealer/retailer service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick. Notice: T oo much or too little fluid can damage your transmi[...]

Checking the Fluid Level Prepare your vehicle as follows: 1. Park your vehicle on a level place. Keep the engine running. 2. With the parking brake applied, place the shift lever in P (Park). 3. With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range. Then, position the shift lever in P (Park). 4. Let the engine run at idle for three minutes or more. Then, without shutting off the engine, follow these steps: The transmission dipstick is located near the center of the engine compartment and will be labeled with the graphic shown. See Engine Compartment Overview on page 6 ‑ 14 for more information on location. 1. Flip the[...]

How to Add Automatic T ransmission Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 . Using a funnel, add fluid down the transmission dipstick tube only after checking the transmission fluid while it is hot. A cold check is used only as a reference. If the fluid level is low , add only enough of the proper fluid to bring the level up to the HOT area for a hot check. It does not take much fluid, generally less than one pint (0.5 L). Do not overfill. Notice: Use of the incorrect automatic transmission fluid may damage the vehicle, and the damages may not be covered by the vehicle's warranty[...]

If it is decided to check the fluid level, be sure to follow all the instructions here, or a false reading on the dipstick may occur . Notice: T oo much or too little fluid can damage your transmission. T oo much can mean that some of the fluid could come out and fall on hot engine parts or exhaust system parts, starting a fire. T oo little fluid could cause the transmission to overheat. Be sure to get an accurate reading if you check your transmission fluid. W ait at least 30 minutes with the engine Off, before checking the transmission fluid level if the vehicle has been driven: . In hot weather , when outside temperatures are above 32°C (90°F). . The vehicle is heavily loaded. . At high[...]

3. With foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range. When M is reached, move the selector from M1 through M3. Then, position the shift lever in P (Park). 4. Let the engine run at idle for two minutes or more. Then, without shutting Off the engine: The transmission dipstick is located near the center of the engine compartment and will be labeled with the graphic shown. See Engine Compartment Overview on page 6 ‑ 14 for more information on location. 1. Flip the handle up and then pull out the dipstick and wipe it with a clean rag or paper towel. 2. Push it back in all the way , wait three seconds and then pull it back o[...]

How to Add Automatic T ransmission Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 . A. WARM Range B. HOT Range Using a funnel, add fluid down the transmission dipstick tube only after checking the transmission fluid while it is warm or hot. A cold check is used only as a reference. If the fluid level is low , add only enough of the proper fluid to bring the level up to the middle of the WARM (A) or HOT (B) range depending on the ambient temperature and prior driving conditions. Refer to “ How to Check Automatic T ransmission Fluid ” , earlier in this section for instructions on driving t[...]

A. Radiator Pressure Cap B. Coolant Recovery T ank C. Engine Cooling Fan(s) { W ARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury . Keep hands, clothing, and tools away from any underhood electric fan. { W ARNING: Heater , fuel operated heater (FOH), radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant. That could cause an engine fire, and you could be burned. Get any leak fixed before you drive the vehicle. Notice: Using coolant other than DEX-COOL may cause premature engine, [...]

Engine Coolant The cooling system in the vehicle is filled with DEX-COOL ® engine coolant. This coolant is designed to remain in the vehicle for five years or 150,000 miles (240 000 km), whichever occurs first. The following explains the cooling system and how to check and add coolant when it is low . If there is a problem with engine overheating, see Engine Overheating on page 6 ‑ 32 . What to Use { W ARNING: Adding only plain water to the cooling system can be dangerous. Plain water , or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle's coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture[...]

Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant recovery tank. If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at or above the COLD FILL mark, add a 50/50 mixture of clean, drinkable water and DEX-COOL ® coolant at the coolant recovery tank, but be sure the cooling system is cool before this is done. When the engine is cold, the coolant level should be at or above the COLD FILL mark. If it is not, there could be a leak in the cooling system. If the coolant is low , add the coolant or take the ve[...]

How to Add Coolant to the Radiator If your vehicle has a diesel engine, see “ How to Add Coolant to the Radiator ” under “ V an Models ” in the Cooling System section of the DURAMAX ® Diesel Supplement for the proper radiator fill procedure. { W ARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury . Keep hands, clothing, and tools away from any underhood electric fan. { W ARNING: Steam and scalding liquids from a hot cooling system can blow out and burn you badly . They are under pressure, and if you turn the surge tank pressure cap — even a little — they can come out at high speed. Never turn the cap when th[...]

3. Fill the radiator with the proper DEX-COOL ® coolant mixture, up to the base of the filler neck. See Engine Coolant on page 6 ‑ 28 for more information about the proper coolant mixture. 4. Then fill the coolant recovery tank to the COLD FILL mark. 5. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off. 6-31[...]

6. Start the engine and let it run until you can feel the upper radiator hose getting hot. W atch out for the engine cooling fan. 7. By this time, the coolant level inside the radiator filler neck may be lower . If the level is lower , add more of the proper DEX-COOL ® coolant mixture through the filler neck until the level reaches the base of the filler neck. 8. Then replace the pressure cap. At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Notice: If the pressure cap is not tightly installed, coolant loss and possible engine damage may occur . Be sure the cap is properly and tightly secured. Engine Overheating If your vehicle [...]

See if the engine cooling fan speed increases when idle speed is doubled by pushing the accelerator pedal down. If it does not, your vehicle needs service. T urn off the engine. Notice: Engine damage from running the engine without coolant is not covered by the warranty . Notice: If the engine catches fire because of being driven with no coolant, your vehicle can be badly damaged. The costly repairs would not be covered by the vehicle warranty . If Steam Is Coming From The Engine Compartment { W ARNING: Steam from an overheated engine can burn you badly , even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away [...]

If the overheat warning is displayed with no sign of steam: 1. T urn the air off. 2. T urn the heater on to the highest temperature and to the highest fan speed. Open the windows as necessary . 3. In heavy traffic, let the engine idle in N (Neutral) while stopped. If it is safe to do so, pull off the road, shift to P (Park) or N (Neutral) and let the engine idle. If the temperature overheat gauge is no longer in the overheat zone or an overheat warning no longer displays, the vehicle can be driven. Continue to drive the vehicle slow for about 10 minutes. Keep a safe vehicle distance from the car in front of you. If the warning does not come back on, continue to drive normally . If the warnin[...]

Power Steering Fluid The power steering fluid reservoir is located in the engine compartment on the driver's side of the vehicle. See Engine Compartment Overview on page 6 ‑ 14 for reservoir location. When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise. A fluid loss in this system could indicate a problem. Have the system inspected and repaired. How to Check Power Steering Fluid T o check the power steering fluid, do the following: 1. T urn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. 3. Unscrew the cap an[...]

Adding W asher Fluid Open the cap with the washer symbol on it. Add washer fluid until the tank is full. See Engine Compartment Overview on page 6 ‑ 14 for reservoir location. Notice: . When using concentrated washer fluid, follow the manufacturer's instructions for adding water . . Do not mix water with ready-to-use washer fluid. W ater can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system. Also, water does not clean as well as washer fluid. . Fill the washer fluid tank only three-quarters full when it is very cold. This allows for fluid expansion if freezing occurs, which could damage the tank if it is completely full. . Do not use en[...]

linings are installed. Add or remove brake fluid, as necessary , only when work is done on the brake hydraulic system. { W ARNING: If too much brake fluid is added, it can spill on the engine and/or fuel operated heater parts, if equipped. If the vehicle has a diesel engine and a fuel operated heater , see “ Fuel Operated Heater (FOH) ” in the diesel engine supplement. The fluid will burn if the engine is hot enough. Y ou or others could be burned, and the vehicle could be damaged. Add brake fluid only when work is done on the brake hydraulic system. See “ Checking Brake Fluid ” in this section. Refer to the Maintenance Schedule to determine when to check the brake fluid. See Schedul[...]

Always clean the brake fluid reservoir cap and the area around the cap before removing it. This helps keep dirt from entering the reservoir . { W ARNING: With the wrong kind of fluid in the brake hydraulic system, the brakes might not work well. This could cause a crash. Always use the proper brake fluid. Notice: . Using the wrong fluid can badly damage brake hydraulic system parts. For example, just a few drops of mineral-based oil, such as engine oil, in the brake hydraulic system can damage brake hydraulic system parts so badly that they will have to be replaced. Do not let someone put in the wrong kind of fluid. . If brake fluid is spilled on the vehicle's painted surfaces, the pain[...]

Brake linings should always be replaced as complete axle sets. Brake Pedal T ravel See your dealer/retailer if the brake pedal does not return to normal height, or if there is a rapid increase in pedal travel. This could be a sign that brake service might be required. Brake Adjustment Every brake stop, the brakes adjust for wear . Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. The vehicle was designed and tested with top-quality brake parts. When parts of the braking system are replaced — for example, when the brake linings wear down and new ones are inst[...]

Infrequent Usage: Remove the black, negative ( − ) cable from the battery to keep the battery from running down. Extended Storage: Remove the black, negative ( − ) cable from the battery or use a battery trickle charger . Jump Starting If the vehicle battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely . { W ARNING: Batteries can hurt you. They can be dangerous because: . They contain acid that can burn you. . They contain gas that can explode or ignite. . They contain enough electricity to burn you. If you do not follow these steps exactly , some or all of these things can hurt you. Not[...]

Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty . Always turn off the radio and other accessories when jump starting the vehicle. 3. T urn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lighter or the accessory power outlet. T urn off the radio and all lamps that are not needed. This will avoid sparks and help save both batteries. And it could save the radio! 4. Open the hoods and locate the positive (+) and negative ( − ) terminal locations of the other vehicle. Y our vehicle has a remote positive (+) jump starting terminal and a [...]

{ W ARNING: Fans or other moving engine parts can injure you badly . Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some basic things you should know . Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one. Negative ( − ) will go to a heavy , unpainted metal engine part or to a remote negative ( − ) terminal if the vehicle has one. Do not connect positive (+) to negative ( − ) or you will get a short that would damage the battery and maybe othe[...]

8. Now connect the black negative ( − ) cable to the negative ( − ) terminal of the good battery . Use a remote negative ( − ) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative ( − ) cable does not go to the dead battery . It goes to a heavy , unpainted metal engine part or to a remote negative ( − ) terminal on the vehicle with the dead battery . 9. Connect the other end of the negative ( − ) cable to the negative ( − ) terminal location on the vehicle with the dead battery . Y our vehicle has a remote negative ( − ) terminal for this purpose. It is marked GND. 10. Now start the vehicle with the good b[...]

T o disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( − ) cable from the vehicle that had the dead battery . 2. Disconnect the black negative ( − ) cable from the vehicle with the good battery . 3. Disconnect the red positive (+) cable from the vehicle with the good battery . 4. Disconnect the red positive (+) cable from the other vehicle. 5. Return the remote positive (+) terminal cover to its original position. All-Wheel Drive Lubricant checks in this section also apply to these vehicles. However , there are two additional systems that need lubrication. T ransfer Case When to Check Lubricant Refer to the Maintenance Schedule to determ[...]

Rear Axle When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant. See Scheduled Maintenance on page 7 ‑ 3 . How to Check Lubricant T o get an accurate reading, the vehicle should be on a level surface. If you have the 1500 Series, the proper level is from 5/8 inch (15 mm) to 1 5/8 inch (40 mm) below the bottom of the filler plug hole. The proper level for the 2500 and 3500 Series is from 0 to 1/4 (6 mm) below the bottom of the filler plug hole. Add only enough fluid to reach the proper level. What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 . 6-4[...]

Front Axle When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See Scheduled Maintenance on page 7 ‑ 3 . How to Check Lubricant T o get an accurate reading, the vehicle should be on a level surface. If the level is below the bottom of the filler plug hole, you may need to add some lubricant. When the differential is cold, add enough lubricant to raise the level to 3/8 inch (10 mm) below the filler plug hole. When the differential is at operating temperature (warm), add enough lubricant to raise the level to the bottom of the filler plug hole. What to Use Refer to the Maintenance Schedule to determine what[...]

Federal law prohibits the following acts or the causing thereof: 1. The removal or rendering inoperative by any person, other than for purposes of maintenance, repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control, prior to its sale or delivery to the ultimate purchaser or while it is in use; or 2. The use of the vehicle after such device or element of design has been removed or rendered inoperative by any person. Among those acts presumed to constitute tampering are the acts listed below . Insulation: . Removal of the noise shields or any underhood insulation. Engine: . Removal or rendering engine speed governor , if the[...]

Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 6 ‑ 54 . For any bulb changing procedure not listed in this section, contact your dealer/retailer . Halogen Bulbs { W ARNING: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. Y ou or others could be injured. Be sure to read and follow the instructions on the bulb package. Headlamps T o remove the headlamp assembly from the vehicle and access the bulbs: 1. Open the hood. See Hood Release on page 6 ‑ 13 for more information. 2. Remove the two bolts from the headlamp assembly . 3. Remove the two pins on the top of the headlamp assembly . T o remove the pins, turn [...]

6. Lower the headlamp to allow the vertical adjustor to clear the tie bar . 7. T urn the headlamp forward and upward to remove it from the grille. 8. T urn the bulb connector counterclockwise and pull it out of the housing. 9. Without removing the headlamp assembly itself, remove the bulb socket from the back of the headlamp on the driver's side. 10. T urn the bulb counterclockwise one quarter turn to remove it from the socket. 1 1. On the passenger's side, turn the bulb clockwise one turn. 12. Install the new bulb into the socket then reinstall it into the headlamp assembly . 13. Reverse the steps to reinstall the headlamp assembly . 6-49[...]

Front T urn Signal, Sidemarker and Parking Lamps T o replace the front turn signal, sidemarker and/or parking lamp bulb(s): 1. Use a small tool to unlatch the outboard clip on the lamp. 2. Pull the lamp forward to completely unlatch the clip. Move the lamp to the outboard side to loosen the tabs. 3. Remove the lamp from the grille. 4. Squeeze the tab on the side of the bulb socket while turning it counterclockwise. 5. Remove the bulb socket from the back of the lamp assembly . 6. Replace the bulb. 7. T urn the bulb socket clockwise to reinstall it in the lamp assembly . 6-50[...]

Center High-Mounted Stoplamp (CHMSL) The Center High-Mounted Stoplamp (CHMSL) is located above the rear doors at the center of the vehicle. T o replace a bulb: 1. Remove the two screws from the CHMSL assembly . 2. Remove the CHMSL assembly . 3. T urn the bulb counterclockwise one quarter turn to remove it from the socket. 4. T urn the bulb clockwise one quarter turn to install it in the socket. 5. Reinstall the CHMSL assembly and two screws. Do not block or damage the CHMSL when items are loaded on the roof of the vehicle. T aillamps T o replace one of these bulbs: 1. Remove the two inboard nuts from the inside of the taillamp assembly . 2. Pull the taillamp assembly straight back to clear t[...]

4. Remove the three nuts on the taillamp assembly . 5. Remove the taillamp assembly from the vehicle. 6. Remove the bulb socket by squeezing the tab on the side of the socket while turning it counterclockwise. 7. T urn the bulb counterclockwise to remove it. 8. T urn the bulb clockwise to install it in the socket. 9. Reinstall the bulb socket by squeezing the tab while turning it clockwise. 10. Reinstall the taillamp assembly and three nuts on the vehicle. 1 1. Slide the taillamp slightly downward to reengage the lower clip. 12. Push the taillamp straight forward to reengage the studs. 13. Reinstall the two inboard nuts from the inside of the taillamp assembly . 6-52[...]

License Plate Lamp T o replace one of these bulbs: A. Bulb Socket B. License Plate Bulb Assembly C. Screws 1. Remove the two screws (C) securing the license plate bulb assembly (B). 2. T urn the bulb socket (A) counterclockwise and pull the bulb straight out of the socket. 3. Install the new bulb. 4. Reverse steps 1 and 2 to reinstall the license plate bulb assembly . 6-53[...]

Replacement Bulbs Exterior Lamp Bulb Number Back-up, Rear Parking, Stoplamp, and Turn Signal Lamp 3157 Center High Mounted Stop Lamp (CHMSL) 912 Front Parking and Turn Signal Lamp 3157KX Front Sidemarker Lamp 194 License Plate Lamp 194 Headlamps Composite High-Beam Headlamp 9005 Composite Low-Beam Headlamp 9006GS Sealed Beam Headlamp H6054 For replacement bulbs not listed here, contact your dealer/retailer . Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance on page 7 ‑ 3 for more information on wiper blade inspection. Replacement blades come in different types and are removed in different ways. T o remove the typ[...]

2. Press down on the blade assembly pivot locking tab. Pull down on the blade assembly to release it from the wiper arm hook. 3. The insert has two notches at one end that are locked by bottom claws of the blade assembly . At the notched end, pull the insert from the blade assembly . 4. T o install the new wiper insert, slide the notched end last, into the end with two blade claws. Then slide the insert all the way through the blade claws at the opposite end. 5. Make sure that the notches are locked by the bottom claws. Make sure that all other claws are properly locked on both sides of the insert slot. 6. Put the blade assembly pivot in the wiper arm hook. Pull it up until the pivot locking[...]

Tires Y our new vehicle comes with high-quality tires made by a leading tire manufacturer . If you ever have questions about your tire warranty and where to obtain service, see your vehicle W arranty booklet for details. For additional information refer to the tire manufacturer . { W ARNING: Poorly maintained and improperly used tires are dangerous. . Overloading your vehicle's tires can cause overheating as a result of too much flexing. Y ou could have an air-out and a serious accident. See Loading the V ehicle on page 5 ‑ 19 . (Continued) W ARNING: (Continued) . Underinflated tires pose the same danger as overloaded tires. The resulting accident could cause serious injury . Check al[...]

Tire Sidewall Labeling Useful information about a tire is molded into the sidewall. The following illustrations are examples of a typical P ‐ Metric and a L T ‐ Metric tire sidewall. Passenger (P ‐ Metric) Tire (A) Tire Size : The tire size code is a combination of letters and numbers used to define a particular tire's width, height, aspect ratio, construction type, and service description. See the “ T ire Size ” illustration later in this section for more detail. (B) TPC Spec (Tire Performanc e Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specif[...]

(E) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG) : Tire manufacturers are required to grade tires based on three performance factors: treadwear , traction, and temperature resistance. For more information, see Uniform Tire Quality Grading on page 6 ‑ 77 . (G) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum pressure needed to support that load. For information on recommen ded tire pressure see Inflation - Tire Pressure on page 6 ‑ 64 and Loading the V ehicle on page 5 ‑ 19 . Light T ruck (L T-Metric) Tire (A) Tire Size : The tire size code is a combination of let[...]

(B) TPC Spec (Tire Performanc e Criteria Specification) : Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines. This does not apply to Goodyear L T225/75R16 G949 RSA and Goodyear L T225/75R16 G933 RSD commercial truck tires. (C) Dual Tire Maximum Load : Maximum load that can be carried and the maximum pressure needed to support that load when used in a dual configuration. For information on recommended tire pressure see Inflation - Tire Pressure on page 6 ‑ 64 and Loading the Vehicle on page 5 ‑ 19 . (D) DOT (Department of T ranspo[...]

(B) Tire Width : The three ‐ digit number indicates the tire section width in millimeters from sidewall to sidewall. (C) Aspect Ratio : A two ‐ digit number that indicates the tire height ‐ to ‐ width measurem ents. For example, if the tire size aspect ratio is 75, as shown in item C of the illustration, it would mean that the tire's sidewall is 75 percent as high as it is wide. (D) Construction Code : A letter code is used to indicate the type of ply construction in the tire. The letter R means radial ply construction; the letter D means diagonal or bias ply construction; and the letter B means belted ‐ bias ply construction. (E) Rim Diameter : Diameter of the wheel in inches[...]

(D) Construction Code : A letter code is used to indicate the type of ply construction in the tire. The letter R means radial ply construction; the letter D means diagonal or bias ply construction; and the letter B means belted ‐ bias ply construction. (E) Rim Diameter : Diameter of the wheel in inches. (F) Load Range : Load Range. (G) Service Description : The service description indicates the load index and speed rating of a tire. If two numbers are given as in the example, 120/1 16, then this represents the load index for single versus dual wheel usage (single/dual). The speed rating is the maximum speed a tire is certified to carry a load. This does not apply to Goodyear L T225/75R16 G[...]

Bias Ply Tire : A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread. Cold Tire Pressure : The amount of air pressure in a tire, measured in pounds per square inch (psi) or kilopascals (kPa) before a tire has built up heat from driving. See Inflation - Tire Pressure on page 6 ‑ 64 . Curb Weight : The weight of a motor vehicle with standard and optional equipment including the maximum capacity of fuel, oil, and coolant, but without passengers and cargo. DOT Markings : A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation (DOT) motor vehicle safety standard[...]

Maximum Load Rating : The load rating for a tire at the maximum permissible inflation pressure for that tire. Maximum Loaded V ehicle Weight : The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight : The number of occupants a vehicle is designed to seat multiplied by 150 lbs (68 kg). See Loading the V ehicle on page 5 ‑ 19 . Occupant Distribution : Designated seating positions. Outward Facing Sidewall : The side of an asymmetrical tire that has a particula r side that faces outward when mounted on a vehicle. The side of the tire that contains a whitewall, bears white lettering, or bears manufacturer , brand, and/ or model na[...]

T readwear Indicators : Narrow bands, sometimes called wear bars, that show across the tread of a tire when only 1/16 inch (1.6 mm) of tread remains. See When It Is Time for New Tires on page 6 ‑ 74 . UTQGS (Uniform Tire Quality Grading Standards) : A tire information system that provides consumers with ratings for a tire's traction, temperature, and treadwear . Ratings are determined by tire manufacture rs using government testing procedures. The ratings are molded into the sidewall of the tire. See Uniform Tire Quality Grading on page 6 ‑ 77 . V ehicle Capacity Weight : The number of designated seating positions multiplied by 150 lbs (68 kg) plus the rated cargo load. See Loading [...]

A vehicle specific T ire and Loading Information label is attached to your vehicle. This label shows your vehicle's original equipment tires and the correct inflation pressures for your tires when they are cold. The recommended cold tire inflation pressure, shown on the label, is the minimum amount of air pressure needed to support your vehicle's maximum load carrying capacity . For additional information regarding how much weight your vehicle can carry , and an example of the Tire and Loading Information label, see Loading the V ehicle on page 5 ‑ 19 . How you load your vehicle affects vehicle handling and ride comfort. Never load your vehicle with more weight than it was design[...]

Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the Tire and Loading Information label, no further adjustment is necessary . If the pressure is low , add air until you reach the recommended amount. If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gauge. Be sure to put the valve caps back on the valve stems. They help prevent leaks by keeping out dirt and moisture. Dual Tire Operation When the vehicle is new , or whenever a wheel, wheel bolt or wheel nut is rep[...]

Tire Pressure Monitor System The T ire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your vehicle's tires and transmit tire pressure readings to a receiver located in the vehicle. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) A[...]

Federal Communications Commission (FCC) and Industry Canada See Radio Frequency Statement on page 8 ‑ 20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/21 1 of Industry Canada. Tire Pressure Monitor Operation This vehicle may have a T ire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel assembly , excluding the spare tire and wheel assembly . The TPMS sensors monitor the air pressure in the vehicle's tires and transmits the tire pressure readings to a receiver located in the vehicle. When a low tire pressure condition i[...]

TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle. A DIC warning message is also displayed. The low tire warning light and DIC warning message come on at each ignition cycle until the problem is corrected. Some of the conditions that can cause the malfunction light and DIC message to come on are: . One of the road tires has been replaced with the spare tire. The spare tire does not have a TPMS sensor . The TPMS malfunction light and DIC message should go off o[...]

TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. Any time you rotate your vehicle's tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. The sensors are matched to the tire/wheel positions in the following order: driver side front tire, passenger side front tire, passenger side rear tire, and driver side rear tire using a TPMS diagnostic tool. See your dealer/ retailer for service. The TPMS sensors can also be matched to each tire/ wheel position by increasing or decreasing the tire's air pressure. If increasing the tire's air pressure, do not exceed the maximum inflati[...]

4. Start with the driver side front tire. 5. Remove the valve cap from the valve cap stem. Activate the TPMS sensor by increasing or decreasing the tire's air pressure for five seconds, or until a horn chirp sounds. The horn chirp, which may take up to 30 seconds to sound, confirms that the sensor identification code has been matched to this tire and wheel position. 6. Proceed to the passenger side front tire, and repeat the procedure in Step 5. 7. Proceed to the passenger side rear tire, and repeat the procedure in Step 5. 8. Proceed to the driver side rear tire, and repeat the procedure in Step 5. The horn sounds two times to indicate the sensor identification code has been matched to[...]

Single Rear Wheels If your vehicle has single rear wheels, always use the correct rotation pattern shown here when rotating the vehicle's tires. Do not include the spare tire in the tire rotation. Dual Rear Wheels If the vehicle has dual rear wheels and the tread design for the front tires is the same as the rear tires, always use one of the correct rotation patterns shown here when rotating the tires. 6-72[...]

If the vehicle has dual rear wheels and the tread design for the front tires is different from the dual rear tires, always use the correct rotation pattern shown here when rotating the tires. The dual tires are rotated as a pair and the inside rear tires become the outside rear tires. When you install dual wheels, be sure that vent holes in the inner and outer wheels on each side are lined up. Also see Dual Tire Operation on page 6 ‑ 66 for additional information. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the T ire and Loading Information label. See Inflation - Tire Pressure on page 6 ‑ 64 and Loading the Vehicle on page 5 ‑ 19 . Make [...]

Make sure the spare tire is stored securely . Push, pull, and then try to rotate or turn the tire. If it moves, tighten the cable. See Storing a Flat or Spare Tire and T ools on page 6 ‑ 96 . When It Is Time for New T ires V arious factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions, influence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. Some commercial truck tires, including Goodyear L T225/75R16 G949 RSA and Goodyear L T225/75R16 G933 RSD, may not have treadwear indicators. If the tires do not ha[...]

Buying New Tires GM has developed and matched specific tires for your vehicle. The original equipment tires installed on your vehicle, when it was new , were designed to meet General Motors Tire Performance Criteria Specification (TPC spec) system rating. If you need replacement tires, GM strongly recommends that you get tires with the same TPC Spec rating. This way , your vehicle will continue to have tires that are designed to give the same performance and vehicle safety , during normal use, as the original tires. GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride a[...]

{ W ARNING: If you use bias-ply tires on the vehicle, the wheel rim flanges could develop cracks after many miles of driving. A tire and/or wheel could fail suddenly , causing a crash. Use only radial-ply tires with the wheels on the vehicle. If you must replace your vehicle's tires with those that do not have a TPC Spec number , make sure they are the same size, load range, speed rating, and construction type (radial and bias ‐ belted tires) as your vehicle's original tires. V ehicles that have a tire pressure monitoring system could give an inaccurate low ‐ pressure warning if non ‐ TPC Spec rated tires are installed on your vehicle. Non ‐ TPC Spec rated tires may give a [...]

Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: T readwear 200 T raction AA T emperature A The following information relates to the system developed by the United States National Highway T raffic Safety Administration (NHTSA), which grades tires by treadwear , traction, and temperature performance. This applies only to vehicles sold in the United States. The grades are molded on the sidewalls of most passenger car tires. The Uniform T ire Quality Grading (UTQG) system does not apply to deep tread, winter-type snow tires, space-saver , or temporary use spare tires, tires with nominal [...]

T raction – AA, A, B, C The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplan ing, or peak traction characteristics. T emperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when te[...]

Wheel Replacement Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts and wheel nuts should be replaced. If the wheel leaks air , replace it (except some aluminum wheels, which can sometimes be repaired). See your dealer/retailer if any of these conditions exist. Y our dealer/retailer will know the kind of wheel you need. Each new wheel should have the same load-carrying capacity , diameter , width, offset and be mounted the same way as the one it replaces. If you need to replace any of the wheels, wheel bolts, wheel nuts or Tire Pressure Monitor System (TPMS) sensors, replace them only with new GM original equipment p[...]

Used Replacement Wheels { W ARNING: Putting a used wheel on the vehicle is dangerous. Y ou cannot know how it has been used or how far it has been driven. It could fail suddenly and cause a crash. If you have to replace a wheel, use a new GM original equipment wheel. Tire Chains { W ARNING: If your vehicle has dual wheels or P245/70R17 or L T245/75R16 size tires, do not use tire chains. They can damage your vehicle because there is not enough clearance. T ire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others ma[...]

If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle's tires properly . If air goes out of a tire, it is much more likely to leak out slowly . But if you should ever have a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the flat tire creates a drag that pulls the vehicle toward that side. T ake your foot off the accelerator pedal and grip the steering wheel firmly . Steer to maintain lane position, and then gently brake to a stop well out of the traffic lane. A rear blowout, particularly on a curve, acts much like a skid and may require the same correction you would use in a skid.[...]

Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 4 ‑ 3 . { W ARNING: Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people. Y ou and they could be badly injured or even killed. Find a level place to change your tire. T o help prevent the vehicle from moving: 1. Set the parking brake firmly . 2. Put the shift lever in P (Park). 3. T urn off the engine and do not restart while the vehicle is raised. 4. Do not allow passengers to remain in the vehicle. T o be even more certain the vehicle will not m[...]

The following information explains how to use the jack and change a tire. Removing the Spare Tire and T ools If you have a cargo van or a passenger van, the equipment you will need is located in the passenger side rear corner of the vehicle. Remove the retaining wing bolt and lift it off of the mounting bracket. If you have a van with the 15 ‐ passenger seating arrangement, the equipment you will need is secured on the rear floor of the passenger side of the vehicle. T o access the equipment, remove the retaining wing bolt and lift it out of the mounting bracket. 6-83[...]

The tools you will be using include the jack (A), jack handle (B), hoist extension (C), jack handle extension (D), and the wheel wrench (E). The spare tire is mounted in the rear underbody of the vehicle. Y ou will use the hoist extension, the jack handle extensions and the wheel wrench to remove the underbody ‐ mounted spare tire. T o lower the spare tire from the vehicle: A. Spare T ire B. T ire/Wheel Retainer C. Hoist Cable D. Hoist Assembly E. Hoist Shaft F . Jack Handle and Hoist Extensions G. Wheel Wrench 6-84[...]

1. Assemble the wheel wrench (G) to one or two of the jack handle extensions and the hoist extension. Insert the hoist extension end through the hole in the rear bumper . 2. Be sure the hoist extension end connects to the hoist shaft (E). The chiseled end of the extension is used to lower the spare tire. 3. T urn the wheel wrench counterclockwise to lower the spare tire to the ground. Continue to turn the wheel wrench until the spare tire can be pulled out from under the vehicle. If the spare tire does not lower to the ground, the secondary latch is engaged causing the tire not to lower . See Secondary Latch System on page 6 ‑ 93 . 4. When the tire has been lowered, pull the tire toward yo[...]

Removing the Flat Tire and Installing the Spare Tire If your vehicle has plastic wheel nut caps, loosen them by turning the wheel wrench counterclockwise. The wheel nut caps are designed to remain with the center cap. Remove the center cap. If the wheel has a smooth center piece, place the chisel end of the wheel wrench in the slot on the wheel and gently pry it out. 1. Do a safety check before proceeding. See Changing a Flat Tire on page 6 ‑ 82 for more information. 2. Loosen all the wheel nuts with the wheel wrench. Do not remove them yet. 3. Assemble the jack and tools: Front Flat: Assemble the jack (A) together with the jack handle (B), 1 or 2 jack handle extensions (D) and the wheel w[...]

Front Position Front Position 6-87[...]

Rear Position Rear Alternative Position (Diesel V ehicles) 4. Position the jack under the vehicle as shown. The front position jacking point is on the frame. The rear position jacking point is on the rear axle. If the exhaust system interferes in the jack location in the rear axle, such as in Diesel vehicles, place the jack (A) on the rear axle between the axle housing and the shock absorber bracket in order to avoid any interference with the exhaust pipe (B). 6-88[...]

{ W ARNING: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. { W ARNING: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. T o help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle. 5. Raise the vehicle by turning the wheel wrench clockwise. Raise the vehicle far enough off the ground so there is enough room for the spare tire to fit. 6. Remove all the wheel nuts. 7. T ake flat tire off of the mounting surface.[...]

{ W ARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency , use a cloth or a paper towel to do this; but be sure to use a scraper or wire brush later , if needed, to get all the rust or dirt off. See Changing a Flat Tire on page 6 ‑ 82 . 8. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. { W ARNING: Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash. 6[...]

9. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. T ighten each wheel nut by hand until the wheel is held against the hub. 10. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely . { W ARNING: Wheel nuts that are not tight can work loose. If all the nuts on a wheel come off, the wheel can come off the vehicle, causing a crash. All wheel nuts must be properly tightened. Follow the rules in this section to be sure they are. { W ARNING: If wheel studs are damaged, they can break. If all the studs on a wheel broke, the wheel could come off and cause a crash. If any stud is damaged because of a loose-running wheel, it could be th[...]

{ W ARNING: Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel nuts. See Capacities and Specifications on page 6 ‑ 1 13 for original equipment wheel nut torque specifications. Notice: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. T o avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. See Capacities and Specifications on [...]

Secondary Latch System Y our vehicle has an underbody-mounted tire hoist assembly equipped with a secondary latch system. It is designed to stop the spare tire from suddenly falling off the vehicle if the cable holding the spare tire is damaged. For the secondary latch to work, the tire must be stowed with the valve stem pointing down. See Storing a Flat or Spare Tire and T ools on page 6 ‑ 96 for instructions on storing the spare tire correctly . { W ARNING: Before beginning this procedure read all the instructions. Failure to read and follow the instructions could damage the hoist assembly and you and others could get hurt. Read and follow the instructions listed next. T o release the sp[...]

2. T urn the hoist extension counterclockwise until approximately 6 inches (15 cm) of cable is exposed. 3. Attach the jack handle/jack handle extension and wheel wrench to the jack . 4. Place the jack under the vehicle, ahead of the rear bumper . Position the center lift point of the jack under the center of the spare tire and turn the handle clockwise to raise the jack until it lifts the secondary latch spring. 5. Keep raising the jack until the spare tire stops moving upward and is held firmly in place. This lets you know that the secondary latch has released. The spare tire is now balancing on the jack. 6-94[...]

6. Lower the jack by turning the wheel wrench counterclockwise. Keep lowering the jack until the spare tire slides off the jack or is hanging by the cable. 7. Disconnect the jack handle from the jack and carefully remove the jack. Use one hand to push against the spare while firmly pulling the jack out from under the spare tire with the other hand. If the spare tire is hanging from the cable, assembly the wheel wrench onto the hoist extension and insert the chisel end of the hoist extension into the hoist shaft hole above the bumper . T urn the wheel wrench counterclockwise to lower the spare the rest of the way . 8. T ilt the retainer at the end of the cable and pull it through the wheel op[...]

Storing a Flat or Spare Tire and T ools { W ARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury . In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. 1. Put the tire on the ground at the rear of the vehicle with the valve stem pointed down. 2. Pull the retaining bar through the center of the wheel, making sure it is properly attached. 3. Pull the wheel toward the rear of the vehicle, keeping the cable tight. 4. Put the chisel end of the hoist extension on an angle through the hole in the rear door frame, above the bumper . 5. Raise the tire fully against the underside of the ve[...]

6. Make sure the tire is stored securely . Push, pull (A), and then try to turn (B) the tire. If the tire moves, use the wheel wrench to tighten the cable. Y ou will hear two clicks when the tire is up all the way . 7. Return the jacking equipment to the proper location. Secure the items and replace the jack cover . Spare Tire This vehicle, when new , may have had a fully-inflated spare tire. A spare tire may lose air over time, so check its inflation pressure regularly . See Inflation - Tire Pressure on page 6 ‑ 64 and Loading the Vehicle on page 5 ‑ 19 for information regarding proper tire inflation and loading the vehicle. For instruction on how to remove, install or store a spare tir[...]

Appearance Care Interior Cleaning The vehicle's interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on the upholstery . Dirt can damage carpet, fabric, leather , and plastic surfaces. Regular vacuuming is recommended to remove particles from the upholstery . It is important to keep the upholstery from becoming and remaining heavily soiled. Soils should be removed as quickly as possible. The vehicle's interior may experience extremes of heat that could cause stains to set rapidly . Lighter colored interiors may require more frequent cleaning. Use care because newspapers and garments that transfer color to home fur[...]

Products that remove odors from the vehicle's upholstery and clean the vehicle's glass can be obtained from your dealer/retailer . Do not clean the vehicle using: . A knife or any other sharp object to remove a soil from any interior surface. . A stiff brush. It can cause damage to the vehicle's interior surfaces. . Heavy pressure or aggressive rubbing with a cleaning cloth. Use of heavy pressure can damage the interior and does not improve the effectivene ss of soil removal. . Laundry detergents or dishwashing soaps with degreasers can leave residue that streaks and attracts dirt. For liquid cleaners, about 20 drops per gallon (3.78 L) of water is a good guide. Use only mild,[...]

T o clean: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Wring the cloth to remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center . Continue cleaning, using a clean area of the cloth each time it becomes soiled. 4. Continue to gently rub the soiled area until the cleaning cloth remains clean. 5. If the soil is not completely removed, use a mild soap solution and repeat the cleaning process that was used with plain water . If any of the soil remains, a commercial fabric cleaner or spot lifter may be necessary . When a commercial upholstery cleaner or spot lifter is to be used, test a small hidden area for colorfastness first[...]

Care of Safety Belts Keep belts clean and dry . { W ARNING: Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water . Weatherstrips Silicone grease on weatherstrips will make them last longer , seal better , and not stick or squeak. Apply silicone grease with a clean cloth. During very cold, damp weather frequent application may be required. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 . W ashing Y our V ehicle The best way to preserve the vehicle's finish is to keep it clean by washing it often. Notice: Certain cleaners contain chemicals that c[...]

Rinse the vehicle well, before washing and after to remove all cleaning agents completely . If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. High pressure car washes may cause water to enter the vehicle. Avoid using high pressure washes closer than 12 inches (30 cm) to the surface of the vehicle. Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Cleaning Exterior Lamps/Lenses Use only lukewarm or cold water , a soft cloth and a car washing soap to clean exterior lamps and lenses. Follow instructions under Washing Y[...]

Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner . Clean the rubber blades using a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent. W ash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged. Wipers can be damaged by: . Extreme dusty conditions . Sand and salt . Heat and sun . Snow and ice, without proper removal Aluminum Wheels Notice: Using strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels, could[...]

Tires T o clean the tires, use a stiff brush with tire cleaner. Notice: Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle. Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty . Finish Damage Any stone chips, fractures or deep scratches in the finish should be re[...]

Chemical Paint Spotting Some weather and atmospheric conditions can create a chemical fallout. Airborne pollutants can fall upon and attack painted surfaces on the vehicle. This damage can take two forms: blotchy , ring-shaped discolorations, and small, irregular dark spots etched into the paint surface. Although no defect in the paint job causes this, we will repair , at no charge to the owner , the surfaces of new vehicles damaged by this fallout condition within 12 months or 12,000 miles (20 000 km) of purchase, whichever occurs first. V ehicle Identification V ehicle Identification Number (VIN) This legal identifier is in the front corner of the instrument panel, on the driver side. It c[...]

Engine Identification The eighth character in the VIN is the engine code. This code identifies the vehicle's engine, specifications, and replacement parts. See “ Engine Specifications ” under Capacities and Specifications on page 6 ‑ 1 13 for the vehicle's engine code. Service Parts Identification Label This label, on the front passenger door frame, has the following information: . V ehicle Identification Number (VIN) . Model designation . Paint information . Production options and special equipment Do not remove this label from the vehicle. Electrical System Add-On Electrical Equipment Notice: Do not add anything electrical to the vehicle unless you check with your dealer/re[...]

Headlamp Wiring The headlamp wiring is protected by fuses in the engine compartment fuse block. An electrical overload will cause the lamps to flicker on and off, or in some cases to remain off. If this happens, have your headlamp wiring checked right away . Windshield Wiper Fuses The windshield wiper motor is protected by a circuit breaker and a fuse. If the motor overheats due to heavy snow , etc., the wiper will stop until the motor cools. Although the circuit is protected from electrical overload, overload due to heavy snow , etc., may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers. If the overload is caused by some elec[...]

Mini ‐ Fuse Usage F1 Empty F2 Steering Wheel Sensor F3 Auxiliary Parking Lamps (Cut ‐ Away) F4 Front Park Lamps F5 T railer Park Lamps F6 Upfitter Park Lamps F7 Right Rear Park Lamp F8 Left Rear Park Lamp F9 Outside Rear View Mirror Switch F10 Airbag/AOS F1 1 Empty F12 Empty F13 Heating, V entilation and Air Conditioning 2 F14 Heating, V entilation and Air Conditioning 1 6-108[...]

Mini ‐ Fuse Usage F15 Empty F17 Outside Rear View Mirror Heater F18 Rear Window Defogger F19 Compass F20 Radio/Chime F21 Remote Function Actuator/T ire Pressure Monitor F22 Ignition Switch/Discrete Logic Ignition Sensor (PK3) F23 Instrument Panel Cluster F25 Heating, V entilation and Air Conditioning Control F26 Auxiliary/T railer Backup F27 T ail Lamps Backup F30 Upfitter Courtesy Lamps F31 Front Door Lock Mini ‐ Fuse Usage F32 Rear Door Lock F33 Cargo Door Unlock F34 Passenger Door Unlock F35 Rear Passenger Door Unlock F36 Driver Door Unlock F37 Empty F38 Empty J ‐ Case Fuse Usage F16 Upfitter Auxiliary 1 F24 Empty F28 Upfitter Auxiliary 2 Reading Lamps F29 Rear Blower 6-109[...]

Relays Usage K1 Run (High Current Micro) K2 Empty (High Current Micro) K3 Park Lamps (High Current Micro) K4 Upfitter Auxiliary 2 (High Current Mini) K5 Rear Defogger (High Current Micro) K6 Retained Accessory Power (RAP) (High Current Micro) Circuit Breaker Usage CB1 Power Seats CB2 Power Windows Engine Compartment Fuse Block The fuse block is located in the engine compartment on the driver side of the vehicle. Notice: Spilling liquid on any electrical components on the vehicle may damage it. Always keep the covers on any electrical component. 6-1 10[...]

Mini Fuse Usage 3 Right Stop/T urn Trailer 4 Spare 5 Spare 6 Fuel System Control Module Ignition 7 Body Control Module 5 8 Body Control Module 7 9 Body Control Module 4 10 Instrument Panel Cluster 1 1 T railer Wiring 12 Spare 13 Brake Switch 14 Windshield Washer 16 Horn 17 T ransmission 18 Air Conditioning Compressor 19 Engine Control Module Battery 20 Spare 21 Left Stop/Turn T railer 22 Spare 23 Spare 24 Fuel Pump 25 Auxiliary Power Outlet Mini Fuse Usage 26 Body Control Module 3 27 Special Equipment Option 28 Airbag 29 Steering Wheel Sensor 30 Engine Control Module Ignition/Glow Plug Module 31 Transmission Control Module Ignition 32 Transmission Control Module Battery 33 Spare 34 Spare 35 [...]

Mini Fuse Usage 63 Fan Clutch (EV) 64 Mass Air Flow/Canister/LAMBDA 65 Odd Ignition/Injectors 66 Daytime Running Lamps 2 (LOL VL ‐ V22) 67 Daytime Running Lamps 1 (LOL VL ‐ V22) 68 Auxiliary Stop Lamps 69 Spare 70 Spare 71 Fuel Heater 72 Body Control Module 6 73 Lighter/Data Link Connection 75 V6 Fuel Injectors 76 Spare 77 Oxygen Sensor 2 (Pre) 78 Engine Control Module Powertrain 79 Even Ignition/Injectors J ‐ Case Fuse Usage 1 ABS Motor 2 ABS Module J ‐ Case Fuse Usage 41 Spare 42 Trailer Wiring 43 Fan High 44 Starter Solenoid 45 Engine Control Module/Powertrain 46 Fuel System Control Module Battery 47 Fan Lo 74 Front Blower Relay Usage 15 Run/Crank 37 Spare 38 Fuel Pump 39 Crank 40[...]

Capacities and Specifications If your vehicle has the DURAMAX Diesel engine, see the DURAMAX Diesel manual for more information. The following approximate capacities are given in metric and English conversions. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 for more information. Application Capacities Metric English Air Conditioning Refrigerant R134a For the air conditioning system refrigerant charge amount, see the refrigerant caution label located under the hood. See your dealer/retailer for more information. Cooling System without Rear Heat 4.3L V6 9.5 L 10.0 qt 4.8L V8, 5.3L V8 1 1.8 L 12.4 qt 6.0L V8 13.1 L 13.8 qt Cooling System with Rear Heat 4.3L V6 12.3 L 13.0 qt 4.8L V8, 5[...]

Application Capacities Metric English Engine Oil with Filter 4.3L V6 4.3 L 4.5 qt 4.8L V8, 5.3L V8, 6.0L V8 5.7 L 6.0 qt Fuel T ank Cutaway (Optional T ank)* 215.7 L 57.0 gal Cutaway (Standard T ank) 124.9 L 33.0 gal Passenger and Cargo 1 17.3 L 31.0 gal * 159 inch (4 039 mm) wheelbase or 177 inch (4 496 mm) wheelbase only T ransmission Fluid (Pan Removal and Filter Replacement) 4-SPD 4L60-E 4.7 L 5.0 qt 6-SPD 6L90 6.0 L 6.3 qt Wheel Nut T orque 190 Y 140 ft lb All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual. Recheck fluid level after filling. 6-1 14[...]

Engine Specifications Engine VIN Code T ransmission Spark Plug Gap 4.3L V6 X Automatic 1.52 mm (0.060 in) 4.8L V8 A Automatic 1.01 mm (0.040 in) 5.3L V8 4 Automatic 1.01 mm (0.040 in) 6.0L V8 G Automatic 1.01 mm (0.040 in) 6-1 15[...]

2 NOTES 6-1 16[...]

Section 7 Maintenance Schedule Maintenance Schedule ........................ .... 7-2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Scheduled Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Owner Checks and Services . . . . . . . . . . . . . . . . . . . . 7-9 Recommended Fluids and Lubricants . . . . . . . . . . 7-1 1 Maintenance Replacement Parts . . . . . . . . . . . . . . 7-13 Engine Drive Belt Routing . . . . . . . . . . . . . . . . . . . . . 7-14 Maintenance Record . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15 7-1[...]

Maintenance Schedule Introduction This maintenance section applies to vehicles with a gasoline engine. For diesel engine vehicles, see the maintenance schedule section in the DURAMAX Diesel manual. Notice: Maintenance intervals, checks, inspections, recommended fluids, and lubricants are necessary to keep this vehicle in good working condition. Damage caused by failure to follow scheduled maintenance might not be covered by the vehicle warranty . Proper vehicle maintenance helps to keep the vehicle in good working condition, improves fuel economy , and reduces vehicle emissions for better air quality . Because of all the different ways people use vehicles, maintenance needs vary . The vehicl[...]

At your General Motors dealer/retailer , you can be certain that you will receive the highest level of service available. Y our dealer/retailer has specially trained service technicians, uses genuine GM replacement parts, as well as, up to date tools and equipment to ensure fast and accurate diagnostics. The proper replacement parts, fluids, and lubricants to use are listed in Recommended Fluids and Lubricants on page 7 ‑ 1 1 and Maintenance Replacement Parts on page 7 ‑ 13 . We recommend the use of genuine parts from your dealer/retailer . Rotation of New Tires T o maintain ride, handling, and performance of the vehicle, it is important that the first rotation service for new tires be p[...]

When the Change Engine Oil Soon message displays, certain services, checks, and inspections are required. The services described for Maintenance I should be performed at every engine oil change. The services described for Maintenance II should be performed when: . Maintenance I was performed the last time the engine oil was changed. . It has been 10 months or more since the Change Engine Oil Soon message has displayed or since the last service. Maintenance I . Change engine oil and filter . See Engine Oil on page 6 ‑ 16 . An Emission Control Service. . Engine coolant level check. See Engine Coolant on page 6 ‑ 28 . . Windshield washer fluid level check. See Windshield Washer Fluid on pag[...]

. Body hinges and latches, key lock cylinders, folding seat hardware, and rear compartment hinges, linkage, and handle pivot points lubrication. See Recommended Fluids and Lubricants on page 7 ‑ 1 1 . More frequent lubrication may be required when vehicle is exposed to a corrosive environment. Applying silicone grease on weatherstrips with a clean cloth makes them last longer , seal better , and not stick or squeak. . Restraint system component check. See Checking the Restraint Systems on page 2 ‑ 80 . . Automatic transmission fluid level check and adding fluid, if needed. See Automatic T ransmission Fluid (4-Speed T ransmission) on page 6 ‑ 20 or Automatic T ransmission Fluid (6-Speed[...]

Once a Y ear . Starter switch check. See Owner Checks and Services on page 7 ‑ 9 . . Parking brake and automatic transmission P (Park) mechanism check. See Owner Checks and Services on page 7 ‑ 9 . . Automatic transmission shiftlock control system check. See Owner Checks and Services on page 7 ‑ 9 . . Ignition transmission lock check. See Owner Checks and Services on page 7 ‑ 9 . . Engine cooling system and pressure cap pressure check. Radiator and air conditioning condenser outside cleaning. See Cooling System on page 6 ‑ 26 . . Exhaust system and nearby heat shields inspection for loose or damaged components. . Throttle system inspection for interference, binding or for damaged o[...]

. Evaporative control system inspection. Check all fuel and vapor lines and hoses for proper hook ‐ up, routing, and condition. Check that the purge valve, if the vehicle has one, works properly . Replace as needed. An Emission Control Service. The U.S. Environmental Protection Agency or the California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle's useful life. We, however , urge that all recommended maintenance services be performed at the indicated intervals and the maintenance be recorded. First Engine Oil Change After Every 160 000 km/100,[...]

Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and filter . Reset oil life system. • • Engine coolant level check. • • Windshield washer fluid level check. • • T ire inflation pressures check. • • T ire wear inspection. • • Rotate tires. • • Fluids visual leak check. • • Engine air cleaner filter inspection (vehicles driven in dusty conditions only). • • Brake system inspection. • • Chassis components lubrication. • Steering and suspension inspection. • Engine cooling system inspection. • Windshield wiper blades inspection. • Body components lubrication. • Restraint system components check. • Automatic transmission[...]

Owner Checks and Services Starter Switch Check { W ARNING: When you are doing this inspection, the vehicle could move suddenly . If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 2. Firmly apply both the parking brake and the regular brake. See Parking Brake on page 3 ‑ 38 . Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts. 3. T ry to start the engine in each gear . The vehicle should start only in P (Park) or N (Neutral). If the vehicle starts in any other position, contact your dealer/retailer for service. Automatic T ransmission Shift Lock Control System Chec[...]

Ignition T ransmission Lock Check While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. . The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). . The ignition key should come out only in LOCK/OFF . Contact your dealer/retailer if service is required. Parking Brake and Automatic T ransmission P (Park) Mechanism Check { W ARNING: When you are doing this check, the vehicle could begin to move. Y ou or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move. Park o[...]

Recommended Fluids and Lubricants This maintenance section applies to vehicles with a gasoline engine. If the vehicle has a diesel engine, see the maintenance schedule section in the DURAMAX ® Diesel manual. Fluids and lubricants identified below by name, part number , or specification can be obtained from your dealer/retailer . Usage Fluid/Lubricant Engine Oil Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol. T o determine the proper viscosity for your vehicle's engine, see Engine Oil on page 6 ‑ 16 . Engine Coolant 50/50 mixture of clean, drinkable water and use only DEX-COOL ® Coolant. See Eng[...]

Usage Fluid/Lubricant Front Wheel Bearings Wheel bearing lubricant meeting requirements of NLGI #2, Category GC or GC-LB (GM Part No. U.S. 1051344, in Canada 993037). Front and Rear Axle SAE 75W-90 Synthetic Axle Lubricant (GM Part No. U.S. 89021677, in Canada 89021678). T ransfer Case DEXRON ® ‐ VI Automatic T ransmission Fluid. One-Piece Propshaft Slip Y oke Spline, T wo-Piece Propshaft Slip-in-T ube Spline Spline Lubricant, Special Lubricant (GM Part No. U.S. 12345879, in Canada 1095351 1). Usage Fluid/Lubricant Hood Hinges Multi-Purpose Lubricant, Superlube (GM Part No. U.S. 12346241, in Canada 10953474). Weatherstrip Conditioning Weatherstrip Lubricant (GM Part No. U.S. 3634770, in C[...]

Maintenance Replacement Parts If the vehicle has the DURAMAX Diesel engine, see the DURAMAX Diesel manual for more information. Replacement parts identified below by name, part number , or specification can be obtained by your dealer/retailer . Part GM Part Number ACDelco Part Number Engine Air Cleaner/Filter 159501 15 A3097C Engine Oil Filter 4.3L V6 25010792 PF47 4.8L V8, 5.3L V8, 6.0L V8 89017524 PF48 Spark Plugs 4.3L V6 12607234 41-993 4.8L V8, 5.3L V8, 6.0L V8 12621258 41-1 10 Wiper Blades — 22 in (56.0 cm) 25949887 — 7-13[...]

Engine Drive Belt Routing V6 Engines V8 Engines If your vehicle has the DURAMAX ® Diesel engine, see the DURAMAX ® Diesel manual for more information. 7-14[...]

Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Maintenance Record Date Odometer Reading Serviced By Services Performed 7-15[...]

Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-16[...]

Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-17[...]

Maintenance Record (cont'd) Date Odometer Reading Serviced By Services Performed 7-18[...]

Section 8 Customer Assistance Information Customer Assistance and Information . . . . . . . . . . . 8-2 Customer Satisfaction Procedure . . . . . . . . . . . . . . . 8-2 Online Owner Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Customer Assistance for T ext T elephone (TTY) Users . . . . . . . . . . . . . . . . . . 8-6 Customer Assistance Offices . . . . . . . . . . . . . . . . . . . 8-6 GM Mobility Reimbursement Program . . . . . . . . . . . 8-7 Roadside Assistance Program . . . . . . . . . . . . . . . . . . 8-8 Scheduling Service Appointments . . . . . . . . . . . . . 8-10 Courtesy T ransportation Program . . . . . . . . . . . . . . 8-1 1 Collision Damage Repair . . .[...]

Customer Assistance and Information Customer Satisfaction Procedure Y our satisfaction and goodwill are important to your dealer and to Chevrolet. Normally , any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer's sales or service departments. Sometimes, however , despite the best intentions of all concerned, misunderstandings can occur . If your concern has not been resolved to your satisfaction, the following steps should be taken: STEP ONE: Discuss your concern with a member of dealership management. Normally , concerns can be quickly resolved at that level. If the matter has already been reviewed with the sales, service, or parts mana[...]

STEP THREE — U.S. Owners: Both General Motors and your dealer are committed to making sure you are completely satisfied with your new vehicle. However , if you continue to remain unsatisfied after following the procedure outlined in Steps One and T wo, you can file with the Better Business Bureau (BBB) Auto Line Program to enforce your rights. The BBB Auto Line Program is an out of court program administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the New V ehicle Limited W arranty . Although you may be required to resort to this informal dispute resolution program prior to filing a court action, use of the [...]

STEP THREE — Canadian Owners: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps 1 and 2, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/ Arbitration Program. General Motors of Canada Limited has committed to binding arbitration of owner disputes involving factory-related vehicle service claims. The program provides for the review of the facts involved by an impartial third party arbiter , and may include an informal hearing before the arbiter . The program is designed so that the entire dispute settlement process, from the time you file your complaint to the final decisio[...]

Online Owner Center Online Owner Center (U.S.) — www .gmownercenter .com/chevrolet Information and services customized for your specific vehicle — all in one convenient place. . Digital owner manual, warranty information, and more . Online service and maintenance records . Find Chevrolet dealers for service nationwide . Exclusive privileges and offers . Recall notices for your specific vehicle . OnStar ® and GM Cardmember Services Earnings summaries Other Helpful Links: Chevrolet − www .chevrolet.com Chevrolet Merchandise — www .chevymall.com Help Center — www .chevrolet.com/helpcenter . F AQ . Contact Us My GM Canada (Canada) — www .gm.ca My GM Canada is a password-protected se[...]

Customer Assistance for T ext T elephone (TTY) Users T o assist customers who are deaf, hard of hearing, or speech-impaired and who use T ext T elephones (TTYs), Chevrolet has TTY equipment available at its Customer Assistance Center . Any TTY user in the U.S. can communicate with Chevrolet by dialing: 1-800-833-CHEV (2438). (TTY users in Canada can dial 1-800-263-3830.) Customer Assistance Offices Chevrolet encourages customers to call the toll-free number for assistance. However , if a customer wishes to write or e-mail Chevrolet, the letter should be addressed to: United States — Customer Assistance Chevrolet Motor Division Chevrolet Customer Assistance Center P .O. Box 33170 Detroit, M[...]

Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V . Customer Assistance Center Paseo de la Reforma # 2740 Col. Lomas de Bezares C.P . 1 1910, Mexico, D.F . 01-800-508-0000 Long Distance: 01 1-52-53 29 0 800 GM Mobility Reimbursement Program This program, available to qualified applicants, can reimburse you up to $1,000 of the cost of eligible aftermarket adaptive equipment required for your vehicle, such as hand controls or a wheelchair/ scooter lift. The offer is available for a very limited period of time from the date of vehicle purchase/lease. For more details, or to det[...]

Roadside Assistance Program For U.S. purchased vehicles, call 1 ‐ 800 ‐ CHEV ‐ USA (1 ‐ 800 ‐ 243 ‐ 8872); (T ext telephone (TTY): 1 ‐ 888 ‐ 889 ‐ 2438) . For Canadian purchased vehicles, call 1-800-268-6800 . Service is available 24 hours a day , 365 days a year . Calling for Assistance When calling Roadside Assistance, have the following information ready: . Y our name, home address, and home telephone number . T elephone number of your location . Location of the vehicle . Model, year , color , and license plate number of the vehicle . Odometer reading, V ehicle Identification Number (VIN), and delivery date of the vehicle . Description of the problem Coverage Services ar[...]

Services Provided . Emergency Fuel Delivery: Delivery of enough fuel for the vehicle to get to the nearest service station. . Lock ‐ Out Service: Service is provided to unlock the vehicle if you are locked out. A remote unlock may be available if you have OnStar ® . For security reasons, the driver must present identification before this service is given. . Emergency T ow From a Public Road or Highway: T ow to the nearest Chevrolet dealer for warranty service, or if the vehicle was in a crash and cannot be driven. Assistance is also given when the vehicle is stuck in the sand, mud, or snow . . Flat Tire Change: Service is provided to change a flat tire with the spare tire. The spare tire,[...]

. T rip Interruption Benefits and Assistance: Must be over 250 km from where your trip was started to qualify . General Motors of Canada Limited requires pre-authorization, original detailed receipts, and a copy of the repair orders. Once authorization has been received, the Roadside Assistance advisor will help you make arrangements and explain how to receive payment. . Alternative Service: If assistance cannot be provided right away , the Roadside Assistance advisor may give you permission to get local emergency road service. Y ou will receive payment, up to $100, after sending the original receipt to Roadside Assistance. Mechanical failures may be covered, however any cost for parts and l[...]

Courtesy T ransportation Program T o enhance your ownership experience, we and our participating dealers are proud to offer Courtesy T ransportation, a customer support program for vehicles with the New V ehicle Limited Warranty (Base W arranty Coverage period in Canada) and extended powertrain, and hybrid specific warranty in both the U.S. and Canada. The Courtesy transportation program is no longer available for cutaway vehicles. Several courtesy transportation options are available to assist in reducing your inconvenience when warranty repairs are required. Courtesy Transportation is not a part of the New V ehicle Limited W arranty . A separate booklet entitled “ Warranty and Owner Assi[...]

Public T ransportation or Fuel Reimbursement If your vehicle requires overnight warranty repairs, and public transportation is used instead of the dealer's shuttle service, the expense must be supported by original receipts and can only be up to the maximum amount allowed by GM for shuttle service. In addition, for U.S. customers, should you arrange transportation through a friend or relative, limited reimbursement for reasonable fuel expenses may be available. Claim amounts should reflect actual costs and be supported by original receipts. See your dealer for information regarding the allowance amounts for reimbursement of fuel or other transportation costs. Courtesy Rental V ehicle Y [...]

Collision Damage Repair If your vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly performed collision repairs diminish your vehicle's resale value, and safety performance can be compromised in subsequent collisions. Collision Parts Genuine GM Collision parts are new parts made with the same materials and construction methods as the parts with which your vehicle was originally built. Genuine GM Collision parts are your best choice to ensure that your vehicle's designed appearance, durability , and safety are preserved. The use of Genuine GM parts can help maintain [...]

Insuring Y our V ehicle Protect your investment in your GM vehicle with comprehensive and collision insurance coverage. There are significant differences in the quality of coverage afforded by various insurance policy terms. Many insurance policies provide reduced protection to your GM vehicle by limiting compensation for damage repairs by using aftermarket collision parts. Some insurance companies will not specify aftermarket collision parts. When purchasing insurance, we recommend that you assure your vehicle will be repaired with GM original equipment collision parts. If such insurance coverage is not available from your current insurance carrier , consider switching to another insurance [...]

. Gather the important information you will need from the other driver . Things like name, address, phone number , driver's license number , vehicle license plate, vehicle make, model and model year , V ehicle Identification Number (VIN), insurance company and policy number , and a general description of the damage to the other vehicle. . If possible, call your insurance company from the scene of the crash. They will walk you through the information they will need. If they ask for a police report, phone or go to the police department headquarters the next day and you can get a copy of the report for a nominal fee. In some states/provinces with “ no fault ” insurance laws, a report m[...]

Reporting Safety Defects Reporting Safety Defects to the United States Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying General Motors. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your dealer , or General Motors. T o contact NHTSA, you may call the V ehicle Safety Hotline toll-free at 1-888-327-4236 (TTY : 1[...]

Reporting Safety Defects to General Motors In addition to notifying NHTSA (or T ransport Canada) in a situation like this, please notify General Motors. Call 1-800-222-1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P .O. Box 33170 Detroit, MI 48232-5170 In Canada, call 1-800-263-3777 (English) or 1-800-263-7854 (French), or write: General Motors of Canada Limited Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body , etc. Service Bull[...]

ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc. on the World Wide Web at: helminc.com Or you can write to: Helm, Incorporated P .O. Box 07130 Detroit, MI 48207 Prices are subject to change without notice and without incurring obligation. Allow ample time for delivery . Note to Canadian Customers: All listed prices are quoted in U.S. funds. Canadian residents are to make checks payable in U.S. funds. V ehicle Data Recording and Privacy Y our GM vehicle has a number of sophisticated computers that record information about the vehicle ’ s performance and how it is driven. For example, your ve[...]

Event Data Recorders This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: . How various systems in your vehicle were operating . Whether or not the driver and passenger safety belts were buckled/fastened . How far , if at all, the driver was pressing the accelerator and/or brake p[...]

OnStar ® If your vehicle has OnStar and you subscribe to the OnStar services, please refer to the OnStar T erms and Conditions for information on data collection and use. Navigation System If your vehicle has a navigation system, use of the system may result in the storage of destinations, addresses, telephone numbers, and other trip information. Refer to the navigation system operating manual for information on stored data and for deletion instructions. Radio Frequency Identification (RFID) RFID technology is used in some vehicles for functions such as tire pressure monitoring and ignition system security , as well as in connection with conveniences such as key fobs for remote door locking[...]

A Accessories and Modifications . . . . . . . . . . . . . . . . . . . . . . . 6-4 Accessory Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24 Accessory Power Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Add-On Electrical Equipment . . . . . . . . . . . . . . . . . . . . . 6-106 Additives, Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Air Cleaner/Filter, Engine . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19 Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Airbag Adding Equipment to Y our Airbag-Equipped V ehicle . . . . . . . . . . . . . . . . . . . . [...]

Audio System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-59 Audio Steering Wheel Controls . . . . . . . . . . . . . . . . . . . 4-79 Radio Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-80 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61 Theft-Deterrent Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-79 Audio System(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63 Automatic Door Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 1 Automatic Door Unlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 1 Automatic H[...]

Chains, T ire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-80 Charging System Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Check Engine Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 Checking Things Under the Hood . . . . . . . . . . . . . . . . . . 6-12 Chemical Paint Spotting . . . . . . . . . . . . . . . . . . . . . . . . . . 6-105 Child Restraints Infants and Y oung Children . . . . . . . . . . . . . . . . . . . . . . . 2-34 Lower Anchors and T ethers for Children . . . . . . . . . . 2-41 Older Children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31 Securing a Child[...]

D Damage Repair , Collision . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Data Recorders, Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19 Daytime Running Lamps (DRL) . . . . . . . . . . . . . . . . . . . . 4-10 Defensive Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Delayed Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 DIC Compass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42 Disc, MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-74 Doing Y our Own Service Work . . . . . . . . . . . . . . . . . . . . . . . 6-5 Dome La[...]

E E85 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8 EDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Electrical Equipment, Add-On . . . . . . . . . . . . . . . . . . . . 6-106 Electrical System Engine Compartment Fuse Block . . . . . . . . . . . . . . . . 6-1 10 Floor Console Fuse Block . . . . . . . . . . . . . . . . . . . . . . .6-107 Fuses and Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . 6-107 Headlamp Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-107 Windshield Wiper Fuses . . . . . . . . . . . . . . . . . . . . . . . . . 6-107 Electronic Imm[...]

Fluid Automatic Transmission . . . . . . . . . . . . . . . . . . . . 6-20, 6-23 Power Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-35 Windshield W asher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-35 Front Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46 Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6 Additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 California Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 E85 (85% Ethanol) . . . . . . . . . . . . . . . [...]

Headlamps (cont.) Front T urn Signal, Sidemarker and Parking Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50 High/Low Beam Changer . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 On Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Engine Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28 Highbeam On Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 Highway Hypnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14 Hill and[...]

Lights Airbag Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Airbag Readiness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 Antilock Brake System (ABS) Warning . . . . . . . . . . . . 4-28 Brake System Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 Charging System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35 Exterior Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 [...]

Manual Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Manual Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Message DIC Warnings and Messages . . . . . . . . . . . . . . . . . . . . . 4-44 Mirrors Manual Rearview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44 Outside Convex Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45 Outside Heated Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-46 Outside Manual Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-44 Outside Power Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45 Outside T[...]

Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38 Over Things That Burn . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-41 P ASS-Key ® III+ Electronic Immobilizer . . . . . . . . . . . . . 3-20 P ASS-Key ® III+ Electronic Immobilizer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 Passenger Airbag Status Indicator . . . . . . . . . . . . . . . . . 4-25 Passenger Sensing System . . . . . . . . . . . . . . . . . . . . . . . 2-73 Passing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Perchlorate Materials Requirements, California . . .[...]

Replacement Bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-54 Replacement Parts Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13 Reporting Safety Defects Canadian Government . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 General Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 U.S. Government . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Restraint System Check Checking the Restraint Systems . . . . . . . . . . . . . . . . . . 2-80 Replacing Restraint System Parts After a Crash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Servicing Y our Airbag-Equipped V ehicle . . . . . . . . . . . 2-78 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-61 Sheet Metal Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-104 Shifting Out of Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40 Shifting Into Park . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-39 Signals, Turn and Lane-Change . . . . . . . . . . . . . . . . . . . . . 4-4 Sliding Side Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 Spare T ire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6[...]

T ires (cont.) Removing the Flat Tire . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-86 Removing the Spare Tire and T ools . . . . . . . . . . . . . . . 6-83 Secondary Latch System . . . . . . . . . . . . . . . . . . . . . . . . . 6-93 Sidewall Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-57 Spare T ire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-97 Storing a Flat or Spare Tire and T ools . . . . . . . . . . . . 6-96 T erminology and Definitions . . . . . . . . . . . . . . . . . . . . . . 6-61 Uniform Tire Quality Grading . . . . . . . . . . . . . . . . . . . . . 6-77 Wheel Alignment and T ire Balance . . . . . . [...]

W W arning Lights, Gauges, and Indicators . . . . . . . . . . . 4-20 W arnings DIC Warnings and Messages . . . . . . . . . . . . . . . . . . . . . 4-44 Hazard Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Safety and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Wheels Alignment and Tire Balance . . . . . . . . . . . . . . . . . . . . . . 6-78 Different Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-76 Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-79 When It Is T ime for New Tires . . . . . . . . . . . . . . . . . . . . . 6-74 Where to Put the Child R[...]