Chicago Electric 65570 инструкция обслуживания

Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools. Diagrams [...]

Page 2 For technical questions, please call 1-800-444-3353. Item 65570 T able of Contents Safety ......................................................... 2 Specifications ............................................. 8 Setup .......................................................... 8 Operation .................................................... [...]

Page 3 For technical questions, please call 1-800-444-3353. Item 65570 Electrical safety 1. Power tool plugs must match the outlet. Never modify the plug in any way . Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 2. A void body contact with grounded surfaces such as[...]

Page 4 For technical questions, please call 1-800-444-3353. Item 65570 Power tool use and care 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Do not use the power tool if the switch does not turn it on and off. Any pow[...]

Page 5 For technical questions, please call 1-800-444-3353. Item 65570 exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) 1 1.  ?[...]

Page 6 For technical questions, please call 1-800-444-3353. Item 65570 Grounding TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding pro[...]

Page 7 For technical questions, please call 1-800-444-3353. Item 65570 Extension Cords 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequat[...]

Page 8 For technical questions, please call 1-800-444-3353. Item 65570 Specifications Electrical Rating 120V~ / 60Hz / 6A Speed 0-2500 SPM Stroke Length 7/8" Setup - Before Use: Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this produc[...]

Page 9 For technical questions, please call 1-800-444-3353. Item 65570 Operating Instructions Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. T ool Set Up TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Squeeze and relea[...]

Page 10 For technical questions, please call 1-800-444-3353. Item 65570 W orkpiece and W ork Area Set Up 1. Designate a work area that is clean and well lit. The work area must not allow access by children or pets to prevent distraction and injury . 2. Route the power cord along a safe route to reach the work area without creating a tripping hazard[...]

Page 1 1 For technical questions, please call 1-800-444-3353. Item 65570 Plunge Cutting Plunge cut into plywood and thin board panels. Do not attempt to plunge cut into thick, hard wood or metal panels. 1. Clearly mark the line of cut. 2. From a convenient starting point within the cutting area, place the tip of the Blade over that point with the S[...]

Page 12 For technical questions, please call 1-800-444-3353. Item 65570 Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Squeeze and release the T rigger and unplug the tool from its electrical outlet before perfor[...]

Page 13 For technical questions, please call 1-800-444-3353. Item 65570 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start. 1. Cord not connected. 2. No power at outlet. 3. T ool’s thermal reset breaker tripped (if equipped). 4. Internal damage or wear . (Carbon brushes or switch, for example.) 1. Check that cord is pl[...]

Page 14 For technical questions, please call 1-800-444-3353. Item 65570 Part Description Qty 1 Baffle Ring 1 2 Chuck Ring 1 3 T orsion Spring 1 4 Pin 1 5 Compression Spring 1 6 Inner Ring 1 7 Cylindrical Pin 1 8 Ring 1 9 Felt Ring 1 10 Bearing 1 11 Ball Cover 1 12 Offsetting Rod 1 13 Pan Head Screw 4 14 Spring W asher 5 15 Flat W asher 6 16 Pan Hea[...]

Page 15 For technical questions, please call 1-800-444-3353. Item 65570 Assembly Diagram SAFETY OPERA TION MAINTENANCE SETUP[...]

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 444-3353 Limited 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of[...]