Chicago Electric 93218 инструкция обслуживания

10” POR T ABLE BRICK/P A VER SA W Model 93218 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yr ight © 2005 by Harbor F reight T ools ® . All rights reser ved. No por tion of this manual or an y ar twork contained herein ma y be reproduced in any shap[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 2 PR ODUCT SPECIFICA TIONS SA VE THIS MANU A L Y ou will need this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep y our in v oice with this manual. Write the in v oice numb[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 3 ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding pr ong or modify the plug in any wa y . Do not use any adapter plugs. Check with a qualified electrician if y[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 4 12. A v oid accidental star ting. Be sure the P ower Switc h is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting ke ys or wrenches bef ore turning the po[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 5 23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitab le f or one tool ma y become hazardous when used on another tool. SER VICE 24. T ool service must be perf ormed only b y qualified repair personnel. Ser vice or mainte[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 6 9. Never leave the Masonry Saw unattended when it is plugged into an electrical outlet. T urn off the tool, and unplug it from its electr ical outlet bef ore leaving. 10. Do not use carbide-tipped saw blades, wood saw blades, or any kind of saw blade except a diamond-tipped saw b[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 7 24. Allow the saw blade to spin up to full speed before feeding a workpiece into it. When tur ning off the Masonr y Sa w , allo w the saw blade to spin do wn and stop on its own. Do not press against the saw blade to stop it. 25. T o av oid accidental injury , alwa ys wear heavy [...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 8 GROUNDING W ARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the [...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 9 EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequate[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 10 6 . If you are using an extension cord outdoors, make sure it is marked with the suffix “W -A” (“W” in Canada) to indicate it is acceptab le for outdoor use . 7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged ex[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 11 UNP A CKING When unpacking, chec k to mak e sure all the par ts shown on the P arts List on pag e 15 are included. If any par ts are missing or broken, please call Harbor F reight T ools at the number shown on the cover of this manual as soon as possible. ASSEMBL Y INSTR UCTIONS[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 12 4 . Once the Saw Blade (15) has been inser ted on the Motor Spindle, inser t the Outer Flange (12) on the Motor Spindle. Then, screw the He x Set Scre w (10) firmly back into the Motor Spindle to secure the Saw Blade in place. (See Figure F .) 5 . Reinstall the F ront Blade Guar[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 13 OPERA TING INSTRUCTIONS 1. W ARNING! Alw a ys wear saf ety impact ey e goggles and heavy work glov es when using the Masonr y Sa w . Using personal saf ety devices reduce the risk f or injur y . 2. Place the Masonr y Sa w on a flat, le vel, sturdy surf ace capable of suppor ting[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 14 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ower Switch (20) of the Masonry Saw is in its “OFF” position and the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 2. Before eac h use, in[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 15 PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PR O VIDED THE P AR TS LIST AND ASSEMBL Y DIAGRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y . NEITHER THE MANUF ACTURER OR DISTRIBUT OR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND T O THE BU[...]

SKU 93218 For technical questions, please call 1-800-444-3353. Page 16 ASSEMBL Y DIA GRAM NO TE: Some par ts are listed and shown f or illustration purposes only , and are not av ailable individually as replacement par ts .[...]