Chrysler 2007 300 SRT8 инструкция обслуживания

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 5 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ................................. 1 3 1 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications / Alterations .......... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 1 ▫ Ignition Key Removal ................... 1 1 ▫ Key-In-Ignition Reminder ................ 1 2 䡵 Sentry Key ............................ 1 2 ▫ Replacement Keys ...................... 1 3 ▫ Customer Key Programming .............. 1 4 ?[...]

▫ Power Door Locks ..................... 2 1 ▫ Child Protection Door Lock ............... 2 3 䡵 W indows ............................. 2 5 ▫ Power W indows ....................... 2 5 ▫ W ind Buffeting ........................ 2 7 䡵 T runk Lock And Release .................. 2 8 䡵 T runk Safety W arning .................... 2 9 ▫ T [...]

A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal The sh[...]

Exit,” under “Personal Settings (Customer Program- mable Features),” under “Electr onic V ehicle Information Center (EVIC)” in Section 4 of this manual. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. [...]

NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the V ehicle Security Alarm Indicator Light will turn on for three (3) seconds for a bulb check. If the light remains on after the bulb ch[...]

consists of programming a blank key to the vehicle electronics. A blank key is one, which has never been programmed. NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer . Customer Key Programming If you have two valid sentry keys, you can program new sentry keys to the system by performing the[...]

General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation. SECURITY[...]

T o Disarm the System: Either press the UNLOCK button on the r emote keyless entry transmitter or insert a valid sentry key into the ignition lock cylinder and turn the key to the ON/ST AR T position. NOTE: • The driver’s door key cylinder and the trunk button on the keyless entry transmitter cannot arm or disarm the system. • The system rema[...]

ILLUMINA TED ENTRY SYSTEM The courtesy lights will turn on when you use the keyless entry transmitter or open the doors. The lights will fade to off after about 30 seconds or they will immediately fade to off once the ignition switch is turned ON from the LOCK position. NOTE: • None of the courtesy lights will operate if the dimmer control is in [...]

T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you pr ogram the system [...]

Lock,” under “Personal Settings (Customer Program- mable Features),” under “Electr onic V ehicle Information Center (EVIC)” in Section 4 of this manual. T o unlatch the trunk: Press the tr unk button on the transmitter two times to unlatch the trunk. Using The Panic Alarm: T o turn the panic alarm feature ON or OFF , press and hold the P [...]

3. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 4. T o assemble the transmitter case, snap the two halves together . If so equipped, install and tighten the screw until snug. Make sure ther e is an even “gap”[...]

DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock each door , pull the door lock plunger on each door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the keys ar e not inside the vehicle before closing the d[...]

If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the LOCK or ACC position and a door[...]

Automatic Unlock Doors on Exit The doors will unlock automatically on vehicles with power door locks if: 1. The Automatic Unlock Doors On Exit featur e is en- abled. 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in NEUTRAL or P ARK. 4. The driver door is opened. 5. The doors were not pr evi[...]

3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside whe[...]

WINDOWS Power Windows The window controls on the driver’s door contr ol all the door windows. There ar e single window controls on each passenger door trim panel, which operate the passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSOR Y position. W ARNING! Never leave children in a vehicle[...]

The power window switches will remain active for up to 60 minutes after the ignition switch is turned off. Open- ing either front door will cancel this featur e. The time for this feature is pr ogrammable. For details, refer to “Delay Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Featur es),” under ?[...]

W indow Lockout Switch The window lockout switch on the driver’s door allows you to disable the window controls on the passenger doors. When the switch is pressed, the window contr ols on the passenger doors will not illuminate and the passenger windows will be disabled. Reset Any time the vehicle battery is disconnected, or goes dead, the auto-u[...]

buffeting occurs with the sunr oof open, then adjust the sunroof opening to minimize the buf feting. TRUNK LOCK AND RELEASE The trunk lid can be r eleased from inside the vehicle by pressing the T runk Release Button located on the instru- ment panel to the left of the steering wheel. NOTE: The transmission must be in Park before the switch will op[...]

TRUNK SAFETY W ARNING W ARNING! Do not allow children to have access to the trunk, either by climbing into the trunk from outside, or through the inside of the vehicle. Always close the trunk lid when your vehicle is unattended. Once in the trunk, young children may not be able to escape, even if they entered through the rear seat. If trapped in th[...]

OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the front and rear seat belts for the driver and all passengers, fr ont airbags for both the driver and front passenger and, if so equipped, side curtain airbags for the driver and passen- gers seated next to a window . If you w[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can in[...]

W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (ben[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. 3. S[...]

BeltAlert Programming The Enhanced W arning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by performing the following steps: NOTE: DaimlerChrysler does not recommend deacti- vating the Enhanced W arning System (BeltAlert). 1. W ith all doors closed, and the ignition switch in any position except ON or ST AR T , buckle[...]

distinctive label on the webbing. Children 12 years old and under should be properly r estrained in the rear seat whenever possible. How T o Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt [...]

Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver’s airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove c[...]

NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deploy- ment. W ARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured be- cause the airbags are no longer functional. These protective covers for the ai[...]

NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to pr ovide improved protection for the driver and fr ont passenger . Side Cur- tain Airbags also work with seat be[...]

8. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate. 9. If your vehicle has side curtain airbags do not lean against the door , airbags will inflate forcefully into the space between you and the door . 10. If the airbag system in this vehicle needs to be modified to accommodate a dis[...]

• Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side W in- dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Seatbelt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors • Driver and Front Passenger Seat Belt P[...]

W ARNING! Ignoring the AIRBAG W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away . • The Driver and Front Passenger Airbag/Inflator Units are l[...]

• The Knee Impact Bolsters help protect the knees of the driver and the front passenger , and position every- one for the best interaction with the front airbag. If A Deployment Occurs The airbag system is designed to deploy when the ACM detects a moderate-to-severe collision, to help r estrain the driver and front passenger , and then to immedia[...]

W ARNING! Deployed airbags can’t protect you in another colli- sion. Have the airbags replaced by an authorized dealer as soon as possible. Enhanced Accident Response Feature If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically . In addition, approxim[...]

Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system promptly: • The Airbag W arning Light does not come on or flickers during the 6 to 8 seconds when the[...]

treated confidentially . Confidential data will not be dis- closed by DaimlerChrysler to any third party except when: 1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2. Used in defense of litigation involving a DaimlerC[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper [...]

Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for childr en who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year . These child seats[...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat. A rearward f[...]

the child restraint using lower anchorages and upper tether straps from the child r estraint to the vehicle structur e. LA TCH-compatible child restraint systems ar e now avail- able. However , because the lower anchorages are to be introduced over a period of years, child r estraint systems having attachments for those anchorages will continue to [...]

Installing the LA TCH-Compatible Child Restraint System W e urge that you car efully follow the directions of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system. The re[...]

• When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach. If th[...]

a child restraint to be tightly installed. Refer to “Auto- matic Locking Mode” in this section for details. A locking clip should not be necessary once the automatic locking feature is enabled. Position the shoulder and lap belt on the child restraint. The automatic locking r etractor is activated by first attaching the child seat, then pulling[...]

3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child r estraint manufacturer’s instruc- tions. NOTE: Ensure that the tether strap does not slip into the opening between the seat backs as you remove slack in the strap. W ARNING! An incorrectly anchored tether strap[...]

CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the br eak-in and not interpreted as an indication of dif ficulty . SAFETY TIPS T ransporting Passengers[...]

If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the [...]

Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor , torn webbing, etc. If there is any question r egarding belt or retractor condition, r eplace the belt. Airbag W arning Light The light should come on and remain on for 6 to 8 second[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 6 3 ▫ Automatic Dimming Inside Mirror .......... 6 3 ▫ Outside Mirrors ....................... 6 3 ▫ Exterior Mirrors Folding Featur e — If Equipped .......................... 6 4 ▫ Driver’s Side Outside Mirror Auto Dimmer .... 6 4 ▫ T ilt[...]

▫ Folding Rear Seat ...................... 8 9 䡵 Driver Memory Seat — If Equipped ......... 9 0 ▫ Programming The Memory Featur e ......... 9 0 ▫ Linking & Unlinking The Remote Keyless T ransmitter T o The Memory Feature ......... 9 1 ▫ Memory Position Recall .................. 9 2 ▫ Easy Entry/Exit Seat (A vailable W ith Memory S[...]

䡵 Electronic Speed Contr ol ................. 1 0 9 ▫ Electronic Speed Contr ol Operation ........ 1 0 9 ▫ T o Activate .......................... 1 1 0 ▫ T o Set At A Desired Speed ............... 1 1 0 ▫ T o Deactivate ........................ 1 1 0 ▫ T o Resume Speed ..................... 1 1 0 ▫ T o V ary The Speed Setting .......[...]

䡵 Cup Holders ......................... 1 2 6 ▫ Front Seat Cup Holders ................. 1 2 6 ▫ Rear Seat Cup Holders ................. 1 2 6 䡵 Storage .............................. 1 2 7 ▫ Console Features ...................... 1 2 7 ▫ C a r g o A r e a .......................... 1 2 7 䡵 Load Leveling System .................. 1 2[...]

MIRRORS Automatic Dimming Inside Mirror This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light in the button will indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror during cleaning, [...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger sid[...]

NOTE: For vehicles equipped with Driver Memory Seat, you can use your remote keyless entry transmitter or the memory switch on the driver’s door panel to return the power mirr ors to pre-pr ogrammed positions. Refer to “Driver Memory Seat” in this section for details. Heated Remote Control Mirrors These mirrors ar e heated to melt frost or ic[...]

HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone?[...]

The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features. Refer to your cellular service pr ovider or the phone manuf[...]

• For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and say each part of the command, when you are asked for it. For example, you can use the combined form voice com- mand ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two [...]

• www .jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing ⬙ and follow the audible prompts. • When prompted, after the voice on beep, say ⬙ Pair a Phone ⬙ and follow t[...]

• The UConnect™ system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call/Dial by Saying a Name • Press the “Phone” button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say “Dial” or Call. ⬙ • System will prompt you to say the name of the person you w[...]

The UConnect™ system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phonebook accessible only in that language. Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in mo[...]

from which you choose. T o select one of the entries from the list, pr ess the ⬙ V oice Recognition ⬙ button while the UConnect™ system is playing the desired entry and say ⬙ Delete. ⬙ • After you enter the name, the UConnect™ system will ask you which designation you wish to delete, home, work, mobile, or pager . Say the designation [...]

Phone Call Features The following features can be accessed thr ough the UConnect™ system if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way calling, this feature can be accessed through the UConnect™ system. Check with your cellular service provider for the featur es th[...]

T oggling Between Calls If two calls are in pr ogress (one active and one on hold), press the ’Phone’ button until you hear a single beep indicating that the active and hold status of the two calls have switched. Only one call can be placed on hold at one time. Conference Call When two calls are in pr ogress (one active and one on hold), press [...]

until the vehicle battery condition dictates cessation of the call on the UConnect™ system and transfer of the call to the mobile phone. • After ignition key is switched to off, a call can continue on the UConnect™ system for certain duration, after which the call is automatically transferred fr om the UConnect™ system to the mobile phone. [...]

NOTE: The emergency number dialed is based on the Country where the vehicle is pur chased (91 1 for USA and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. The UConnect™ system does slightly lower your chances of successfully making a phone call as to that for the cell phone direct[...]

Y ou can use your UConnect™ system to access a voice- mail system or an automated service, such as, paging service or automated customer service. Some services requir e immediate response selection, in some instances, that may be too quick for use of UConnect™ system. When calling a number with your UConnect™ system that normally requir es yo[...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measur es). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played throug[...]

Connect or Disconnect Link Between the UConnect™ System and Cellular Phone Y our cellular phone can be paired with many dif ferent electronic devices, but can only be actively ⬙ connected ⬙ with one electronic device at a time. If you would like to connect or disconnect the Blue- tooth™ connection between a UConnect™ paired cellular phone[...]

Delete UConnect™ Paired Cellular Phones • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • At the next prompt, say ⬙ Delete ⬙ and follow the prompts. • Y ou can also press the ⬘ V oice Recognition’ button anytime while the list is being played and th[...]

• UConnect™ phonebook nametag recognition rate is optimized for the voice of the person who stored the name in the phonebook. • Y ou can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). ⬙ 800 ⬙ must be spoken ⬙ eight-zero-zer o. ⬙ • Even though international dialing for most number combinations is supported, some shortcut dia[...]

82 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 83 3[...]

84 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up [...]

W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat control[...]

Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support. Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjustable restraints should be [...]

ignition, you can choose from High, Of f, or Low heat settings. Amber LEDs in the top portion of each switch indicate the level of heat in use. T wo LEDs will illuminate for high, one for low , and none for off. Press the switch once to select high-level heating. Pr ess the switch a second time to select low-level heating. Press the switch a third [...]

Folding Rear Seat The rear seatbacks can be folded forwar d to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use. When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seat[...]

DRIVER MEMOR Y SEA T — IF EQUIPPED This feature allows the driver to stor e up to two different memory profiles, for easy r ecall through a memory switch. Each memory profile contains desir ed position settings for the driver seat, side mirror , adjustable pedals, and power tilt and telescopic steering column, and a set of desired radio station p[...]

2. Press and r elease the Set (S) button on the memory switch, then press the side of the r ocker switch labeled (1) within 5 seconds. The Electronic V ehicle Information Center (EVIC) will display which memory position is being set. If desired, a second memory pr ofile can be stored into memory as follows: 1. Adjust all memory profile settings to [...]

NOTE: Y our transmitters can be unlinked to your memory settings by pressing the Set (S) button followed by the UNLOCK button on the transmitter in Step 4 above. Memory Position Recall NOTE: The vehicle must be in Park to recall memory positions. If a recall is attempted when the vehicle is not in Park, a message will display in the Electronic V eh[...]

is between 2.4 inches and 3.5 inches (60 mm and 90 mm) forward of the r ear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 2.4 inches (60 mm) forward of the r e[...]

Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it. Lower the hood, until it is open approximately 6 inches (15 [...]

LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the headlights, parking lights, instru- ment panel lights, instrument panel light dimming, inte- rior lights, and fog lights. Rotate the headlight switch clockwise to the first detent for parking light and instrum[...]

NOTE: The engine must be running befor e the head- lights will come ON in the Automatic mode. Headlights On with Wipers When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the headlight switch is placed in the AUTO position. In addition, the headlights will turn off when the wipers ar[...]

3. Push the Multi-Function Lever away from you to switch the headlights to the HIGH BEAM position. NOTE: This system will not activate until the vehicle is at or above 25 mph (40 km/h). T o Deactivate: Perform either of the following steps to deactivate the SmartBeam system. 1. Pull the Multi-Function Lever toward you to switch the headlights from [...]

Daytime Running Lights (Canada Only) The high beam headlights will come on as Daytime Running Lights, whenever the ignition switch is on, the headlights are of f, and the parking brake is off. The headlight switch must be used for normal nighttime driving. Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OF[...]

by moving the lever partially up or down without moving beyond the detent. Releasing the lever at the detent will provide 3 flashes. If either light has a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the fuse or indicator is defective or there may be a [...]

Interior Lights The interior lights come on when a door is opened. T o protect the battery , the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or ar e on because a door is open. This includes the glove box light, but no[...]

WINDSHIELD WIPERS AND W ASHERS The multi-function lever operates the windshield wipers and washer when the ignition switch is in the ON position. The lever is located on the left side of the steering column. Rotate the end of the multi-function lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second [...]

W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use. Mist Feature Push the multi-function lever inward (towar d the st[...]

the end of the multi-function lever to one of the six intermittent wiper settings to activate this feature. The sensitivity of the system is adjustable from the multi-function lever . W iper delay position 1 is the least sensitive and wiper delay position 6 is the most sensitive. Choose setting 3 or 4 for normal rain conditions. Choose setting 2 or[...]

Adding W asher Fluid The windshield washer fluid reservoir is located in the front of the engine compartment on the passenger side of the vehicle. Be sure to check the fluid level in the reservoir at r egular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out [...]

HEADLIGHT W ASHERS The multi-function lever operates the headlight washers when the ignition switch is in the ON position and the headlights are ON. The multi-function lever is located on the left side of the steering column. T o use the headlight washers, push the multi-function lever inward (towar d the steering column) to the second detent and r[...]

Adding W asher Fluid The headlight washer and windshield washer share the same fluid reservoir . The reservoir is located in the fr ont of the engine compartment on the passenger side of the vehicle. Be sure to check the fluid level in the r eservoir at regular intervals. Fill the r eservoir with windshield washer solvent (not radiator antifreeze) [...]

POWER TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column lever is located below the multi-function lever on the steering column. T o tilt the steering column, move the lever up or down as [...]

ADJUST ABLE PEDALS The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows both the brake and accelerator pedal to move toward or away fr om the driver to provide impr oved position with the steering wheel. The switch is located on the front side of the drive[...]

CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal’s path. ELECTRONIC SPEED CONTROL When engaged, this device takes over the accelerator operation at speeds greater[...]

T o Activate: Push the speed control lever inwar d (toward the steering column) and release (“ON/OFF”). The indicator light in the lever (and in the instrument cluster on some models) will illu- minate to show that the speed control system is ON. T o turn the system OFF , push the lever inward (towar d the steering column) again and release. At[...]

speed. T o do so, push the lever up and release (RES/ ACCEL), and then remove your foot fr om the accelerator pedal. T o V ary the Speed Setting: When the speed control is set, you can incr ease speed by pushing the lever up and holding (“RES/ACCEL”). When the lever is released, a new set speed will be established. Pushing the lever up and rele[...]

REAR P ARK ASSIST SYSTEM The Rear Park Assist System is a driver aid that senses for obstacles behind the vehicle. Refer to the W arnings, Cautions, and Notes in this section for system limitations and usage recommendations. The Rear Park Assist System is active when the driver shifts the transmission into the R (Reverse) position, and the parking [...]

W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in. (150 cm) Y ellow None 2nd LED 47 in. (120 cm) Y ellow None 3rd LED 39 in. (100 cm) Y ellow None 4th LED 31.5 in. (80 cm) 31.5 in. (80 cm) Y ellow None 5th LED 25.5 in. (65 cm) 25.5 in. (65 cm) Y ellow None 6th LED 20 [...]

W ARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots be- fore backing up. Y ou are responsible for safety and must continue to pay attention to your s[...]

If “Service Park Assist System” appears in the Electronic V ehicle Information Center (EVIC) after making sure the rear bumper is clean please see your authorized dealer . OVERHEAD CONSOLE The overhead console contains courtesy/r eading lights, an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and an optional pow[...]

GARAGE DOOR OPENER (HomeLink 姞 ) The HomeLink 威 Universal T ransceiver replaces up to three r emote controls (hand held transmitters) that oper - ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button. The Universal T ransceiver operates off your vehicle’s battery and char[...]

Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that you install a new battery in the hand-held transmitter of the device being programmed. This will allow for quicker training and accurate transmission of the radio-frequency signal. The Electronic V ehicle Inform[...]

1. Press and hold the two outer HomeLink buttons. Release the buttons only when the EVIC displays “Chan- nels Cleared” (after 20 seconds); however , do not hold the buttons for longer than 30 seconds. Do not repeat this step if programming a second or thir d hand-held trans- mitter to the remaining HomeLink buttons. 2. Position the end of your [...]

NOTE: If your garage door opener fails to respond to the programmed HomeLink 威 Universal T ransceiver , and your garage door opener is manufactured after 1995, it may have a multiple security code system (rolling code system). Please proceed to Steps 6–8 to complete the programming of a r olling code equipped device (most common garage door ope[...]

NOTE: If programming a garage door opener or gate operator , it is advised to unplug the device during the ⬙ cycling ⬙ process to pr event possible overheating. 3. Continue to press and hold the HomeLink button while you press and release your hand-held transmitter every two seconds until the frequency signal is accepted successfully by HomeLin[...]

For questions or comments, contact HomeLink at www .homelink.com or 1-800-355-3515 . Security If you sell your vehicle, be sure to erase the fr equencies by following the “Erasing HomeLink Buttons” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the foll[...]

W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wi[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof - Express Press and r elease the ⬙ V ⬙ b[...]

Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. Sunroof Fully Closed Press the switch forwar d and release to ensur e that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There ar e two 12-volt electrical outlets on this vehicle. Both of the outlets are pr[...]

The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cell[...]

CUP HOLDERS Front Seat Cup Holders The cup holders are located in the forwar d edge of the center console. Push down on the cover as shown to expose the cup holders. Close the cover when the cup holders are no longer needed. Rear Seat Cup Holders The rear seat cup holders ar e located in the center armrest between the rear seats. The cup holders ar[...]

STORAGE Console Features The center console contains a large storage bin. The storage bin contains a four-slot coin holder (designed to hold various size coins) and a rubber mat at the bottom of the bin for noise control. The bin is lar ge enough to hold a portable AC/DC converter to power laptops, games, or other electrical equipment. T wo slots a[...]

W ARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious in- jury . • The cargo area in the rear of the vehicle (with the rear seatbacks in the l[...]

LOAD LEVELING SYSTEM The automatic load leveling system will provide a level- riding vehicle under most passenger and cargo loading conditions. A hydraulic pump contained within the shock absorbers raises the rear of the vehicle to the corr ect height. It takes approximately 1 mile (1.6 km) of driving for the leveling to complete depending on road [...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel And Controls ............ 1 3 4 䡵 Premium Instr ument Cluster .............. 1 3 5 䡵 Instrument Cluster Descriptions ........... 1 3 6 䡵 Electronic V ehicle Information Center (EVIC) .............................. 1 4 4 ▫ Electronic V ehicle Information Center (EVIC) D i s [...]

䡵 Sales Code RAK – AM/FM/Cassette/CD (6-Disc) Radio W ith Optional Satellite Radio, Hands Free Phone, V ideo, MP3, And WMA Capabilities . . 159 ▫ Operating Instructions - Radio Mode ....... 1 5 9 ▫ Operating Instructions — T ape Player ....... 1 6 2 ▫ Seek Button ......................... 1 6 3 ▫ Fast Forward (FF) ....................[...]

▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) .................... 1 7 6 ▫ Selecting Satellite Mode In REF , RAQ, And RAK Radios ......................... 1 7 7 ▫ Selecting a Channel .................... 1 7 7 ▫ Storing And Selecting Pre-Set Channels ...... 1 7 8 ▫ Using The PTY (Pr ogram T ype) Button (If Equipped) ..[...]

INSTRUMENT P ANEL AND CONTROLS 1 — Air Outlet 7 — Radio 13 — Ignition Switch 2 — Instrument Cluster 8 — Climate Control 14 — Hood Release 3 — Hazard Switch 9 — Heated Seat Switch* 15 — T runk Release Switch 4 — Analog Clock 10 — Power Outlet 16 — Headlight Switch 5— Electronic Stability Pr ogram Off Button* / T raction Con[...]

PREMIUM INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 135 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Electronic Speed Contr ol Indicator Light — If Equipped This light will turn on when the electronic speed control is ON. (See page 109 for mor e information.) 2. Low Fuel Indicator Light This light will turn on and a single chime will sound when the fuel level drops to 1/8 tank. (See page 249 for more informatio[...]

7. T achometer The red segments indicate the maximum permissible engine revolutions-per -minute (r .p.m. x 1000) for each gear range. Ease up on the accelerator before r eaching the red a rea . 8. Engine T emperature W arning Light This light will turn on and a single chime will sound to warn of an overheated engine condi- tion. When this light tur[...]

during starting, or stays on, or turns on while driving, then have the system inspected at your authorized dealer as soon as possible. (See page 46 for more information.) 12. Brake System W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicat[...]

The operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should turn on for approxi- mately two seconds and then turn off. The light will remain on if the parking brake is applied or if a brake fault is detected. If the parking brake is not applied and the light rema[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. 15. T rip Odometer B[...]

20. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 21. Electronic Thr ottle Control (ETC) Light This light will turn on briefly as a bulb check when the ignition switch is turned ON. This light will also turn on while the engine is running if ther e is a problem with the Elec- tronic [...]

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to maintain correct tir e pressur e, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. The T ire Pressur e Monitoring T elltale Light will illumi- nate in the instrument[...]

24. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD. The OBD system monitors engine and automatic transmission control sys- tems. The light will turn on when the key is in the ON position before engine start. If the light does not come on when turning the key from OFF to ON, have the condition checked promp[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the upper part of the cluster between the speedometer and tachometer . V ehicles equipped with steering wheel mounted buttons (described in this section) are also equipped with the EVIC. The EVI[...]

Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being played (if so equipped), or changes the current CD track being played (if so equipped) when the EVIC is in the Compass/T emp/Audio screen. Press the SCROLL button to scr oll throug[...]

• Memory #1/#2 Profile Recall • Memory System Disabled – V ehicle Not In Park (with a single chime) • Memory System Disabled – Seat Belt Buckled (with a single chime) • Personal Settings Not A vailable – V ehicle Not in Park • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph [1.6 km]) • Left/Rig[...]

• Right Front Low Pr essure (with a single chime). Refer to information on “T ire Pressur e” and “T ire Pr essure Monitor” in the “Starting And Operating” section of this manual. • Right Rear Low Pressur e (with a single chime). Refer to information on “T ire Pressur e” and “T ire Pr essure Monitor” in the “Starting And Op[...]

• Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the FUNCTION SELECT button. NOTE: Significant changes i[...]

Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the compass button to display one of eight com- pass readings and the outside temperatur e. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to set the compass manually . When the vehicle is new , the compa[...]

1. T urn the ignition switch ON. 2. Press and hold the compass button for appr oximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and r elease FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and r ele[...]

• Call status: Incoming call, connecting, connected, air time in minutes and seconds, call ended, call failed, roaming, and no phone connection. • UConnect Active. • Caller ID phone number display . When the appropriate conditions exist, and if supported by the cell phone, the EVIC will display the following telephone symbols: The EVIC displa[...]

The EVIC displays this symbol to indicate the battery strength of the UConnect™ phone. The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the UConnect™ phone is currently not avail- able. Navigation — If Equipped Navigation Display Control Press and r elease the MENU[...]

System W arnings (Customer Information Features) Press and r elease the MENU button until “SYSTEM W ARNINGS” displays in the EVIC. Then, press the SCROLL button to display anyone of the following choices: • Oil T emperature Shows the actual oil temperature. • Oil Pressur e Shows the actual oil pressur e. • T ire Pr essure Shows the actual[...]

“Unlock Doors Automatically on Exit” When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the P (Park) or N (Neutral) position and the driver’s door is opened. T o make your selection, press and r elease the FUNC- TION SELECT button until “ON” or “OFF” appears. “Remote Key Unlock” When [...]

the FUNCTION SELECT button until “ON” or “OFF” appears. When OFF is selected, the system reverts to the standard intermittent wiper operation. “Automatically Move Seat Back on Exit” — If Equipped This feature pr ovides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. T o make your sel[...]

“T ilt Mirrors Down in Reverse” When ON is selected, the outside rearview mirr ors will tilt downward when the ignition switch is in the ON position and the transmission is in the R (Reverse) position. The mirrors will move back to their pr evious position when the transmission is shifted out of R (Re- verse). T o make your selection, press and[...]

“Display Units of Measure in” The EVIC, odometer , and navigation system (if equipped) can be changed between English and Metric units of measure. T o make your selection, press and release the FUNCTION SELECT button until “US” or “METRIC” appears. “Automatic High Beams” — If Equipped When this feature is selected, the high beam h[...]

RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent r eception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and sa[...]

SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Swi[...]

Press the right side of the button to seek up and the left side to seek down. The radio will remained tuned to the new station until you make another selection. Holding the button and will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next station, in eit[...]

AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will display . T urn the TUNE control to the right or left to incr ease or decrease the Bass tones. Press the r otary TUNE control a second time and MID will display . T urn the TUNE control to the right [...]

Soft Rock Soft_Rock T op 40 T op_40 Country Country Oldies Oldies Soft Soft Nostalgia Nostalgia Jazz Jazz Classical Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Soft_R_&_B Foreign Language Foreign_Language Religious Music Religious_Music Religious T alk Religious_T alk Personality Personality Public Public College College U[...]

Seek Button Press the SEEK button up for the next selection on the tape and down to return to the beginning of the curr ent selection. Press the SEEK button up or down to move the track number to skip forward or backwar d 1 to 6 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. Fast Forward (FF) Press the [...]

Noise Reduction The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off. T o turn off the Dolby Noise r eduction System: Press Preset 1 after you insert the tape. The NR light in the display will go off when the Dolby System is of f. * ”Dolby” noise reduction is manufactur ed under license from Dolby Labo[...]

SCAN Button (CD MODE for CD Audio Play) Press the Scan button to scan thr ough each track on the CD currently playing. LOAD/EJECT Button (CD Mode for CD Audio Play) LOAD/EJECT - Load Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSE[...]

R W/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . TUNE Control (CD MODE for CD Audio Play) Pressing the TUNE contr ol allows the setting of the T one, Fade, and Balance. S[...]

files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats ar e not supported. The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (inc[...]

ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP3 and WMA Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contai[...]

The radio display will show ⬙ LOADING DISC ⬙ when the disc is loading. LOAD/EJT - Eject Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt [...]

RND/PTY Button (CD Mode for MP3 Play) Pressing this button plays files randomly . SET/DIR Button (CD Mode for MP3 Play) Press the SET/DIR Button to display folders, when playing an MP3 discs that have a file/folder structur e. T urn the TUNE control to display available folders or move through available folders. Pr ess the TUNE control to select a [...]

screen to pr ovide maps, turn identification, selection menus and instructions for selecting a variety of destina- tions and routes, AM/FM stereo radio and six-disc CD changer with MP3 capability . Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America. Refer to your “Navigati[...]

4. T o turn daylight savings on or off, select “Daylight Savings” and press ENTER. Select “On” or “Of f” and press ENTER. 5. Select DONE to exit from the clock setting mode. Pr ess ENTER to save your changes. If you press CANCEL or NA V then your changes will not be saved. User Defined Clock If you wish to set the clock to a time differ[...]

4. T o increase the clock by minutes, make sure “MIN +” is highlighted and press ENTER. Pr ess ENTER again to increase the clock by another minute. 5. T o decrease the clock by minutes, use the Select Encoder to highlight the “-“ sign. Press ENTER. Pr ess ENTER again to decrease the clock by another minute. 6. Select “DONE” to exit from[...]

3. T o switch the clock to the small clock, quickly press TIME again. 4. T o toggle back to the large clock, simply press TIME. VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-power ed remote control, and two [...]

Kicker Mobile Surround (KMS1) The VES for this vehicle comes equipped with Kicker Mobile Surround (KMS1). This featur e offers the ultimate movie experience by providing surr ound sound uniquely equalized for the interior space of your vehicle. The KMS1 activates whenever a DVD is in the VES player , and the radio mode is set to VES, and the video [...]

video screen is stowed away , or the radio is set to a mode other than VES, or if you are using the Aux jacks on the VES. Y our vehicle is equipped with a state of the art digital audio amplifier that decodes stereo sound inputs into 5.1 formatted surround sound. When in surr ound sound mode, the KMS1 automatically sets balance and fade to provide [...]

ESN/SID mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed. ESN/SID Access W ith RAQ and RAK Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID num- bers will display .[...]

and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released. Press and r elease the SCAN button (if equipped) to automatically change channels every 7 seconds. The radio will pause on each channel for 7 seconds before moving on to the next channel. The word ⬙ SCAN ⬙ will [...]

Satellite Antenna T o ensure optimum r eception, do not place items on the roof ar ound the rooftop antenna location. Metal objects placed within the line of sight of the antenna will cause decreased performance. Lar ger luggage items should be placed as far forward as possible. Do not place items directly on or above the antenna. Reception Quality[...]

The VOLUME button controls the sound level of the sound system. Press the top of the VOLUME button to increase the sound level. Press the bottom of the VOLUME button to decrease the sound level. Press the AUDIO MODE button to select the Compass/T emp/Audio screen. This scr een displays radio station frequencies, any one of twelve radio station pres[...]

T ape Player Operation Press the top of the SCROLL button once to listen to the next track on the cassette. Press the bottom of the SCROLL button once either to listen to the beginning of the current track or to listen to the beginning of the previous track if it is within 5 seconds after the curr ent track begins to play . Press either the top or [...]

5. A loose tape should be corrected befor e use. T o rewind a loose tape, insert the eraser end of a pencil into the tape drive gear and twist the pencil in the requir ed directions. Maintain your cassette tape player . The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played. The result of [...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

The controls on the climate contr ol provide the system with operator input. The dual sun-sensor monitors sun load coming through the windshield. The infrar ed sensor independently measures the surface temperatur e of the driver and passenger . Other sensors take account of vehicle-speed, A/C pr essure, outside temperature, and engine cooling tempe[...]

The system will automatically control r ecir- culation. However , pressing the Recir cula- tion Control button will temporarily put the system in recir culation mode (ten minutes). This can be used when outside conditions such as smoke, odors, dust, or high humidity are pr esent. Activating recir culation will cause the LED in the control button to[...]

186 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles[...]

NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. The r ecirculation mode should only be used temporarily . An LED in the button illuminates when the recir cula[...]

system lubrication to minimize the possibility of com- pressor damage when the system is started again. W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide suf ficient heating. If side win- dow fogging becom[...]

Control Setting Suggestions for V arious W eather Conditions 190 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

REAR WINDOW FEA TURES Electric Rear Window Defroster The electric Rear W indow Defroster Control is located on the climate control. Pr ess this button to turn on the rear window defr oster and the heated side mirrors (if equipped). An LED in the button will illumi- nate when the rear window defr oster is ON. The de- froster automatically turns of f[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 1 9 6 ▫ Automatic T ransmission ................ 1 9 7 ▫ Normal Starting ...................... 1 9 7 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ................ 1 9 7 ▫ If Engine Fails T o Start ................. 1 9 7 ▫ After Starting .........[...]

䡵 Electronic Brake Contr ol System ........... 2 1 4 ▫ ABS (Anti-Lock Brake System) ............ 2 1 4 ▫ TCS (T raction Control System) ............ 2 1 5 ▫ BAS (Brake Assist System) ............... 2 1 5 ▫ ESP (Electronic Stability Program) ......... 2 1 6 ▫ Synchronizing ESP .................... 2 1 9 ▫ ESP/BAS Malfunction Indicator[...]

▫ 6.1L Engine ......................... 2 4 6 ▫ Reformulated Gasoline ................. 2 4 6 ▫ Gasoline/Oxygenate Blends .............. 2 4 7 ▫ MMT In Gasoline ..................... 2 4 7 ▫ Materials Added T o Fuel ................ 2 4 7 ▫ Fuel System Cautions .................. 2 4 8 ▫ Carbon Monoxide W arnings .............. 2 4 8 [...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or [...]

Automatic T ransmission The gear selector must be in the NEUTRAL or P ARK position before you can start the engine. Apply the brakes before shifting into any driving gear . Normal Starting Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. T urn the key to the “ST AR T” position an[...]

W ARNING! • Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Un- bu[...]

ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cor d. The engine block heater cord is r outed under the hood on the driver side of the vehicle. It has a removable c[...]

W ARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idlin[...]

The selector lever is automatically locked while in the P (Park) position. T o move the selector lever out of the P (Park) position, the brake pedal must be firmly depressed before the shift lock will r elease. Shift the selector lever to the desired position only when the engine is idling normally and the brake pedal is applied. Do not release the[...]

Brake/T ransmission Shift Interlock System This vehicle is equipped with a brake transmission shift interlock system (BTSI) that holds the selector lever in the P (Park) position when the ignition switch is in the LOCK position. T o move the gear selector lever out of the P (Park) position, the ignition switch must be turned to the ON position, and[...]

5 Speed Automatic T ransmission Shifting from D (Drive) to P (Park) or R (Reverse) (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake when moving the selector lever between these gears. Gear Ranges P (Park) P (Park) supplements the parking brake by loc[...]

The following indicators should be used to ensure that you have engaged the selector lever into the P (Park) position: • When shifting into P (Park) move the lever all the way forward until it stops, and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P (Park) position. CAUTION! Damage to th[...]

D (Drive) This range should be used for most city and highway driving. It provides the smoothest upshifts and down- shifts and best fuel economy . The transmission automatically upshifts through fifth gear . The D (Drive) position provides optimum driving characteristics under all normal operating conditions. When frequent transmission shifting occ[...]

W ARNING! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Y our vehi- cle’s ABS will not prevent this type of loss of control. Y ou could lose control of your vehicle and have an accident. Delayed Shifts in Cold T emperatures During cold temperature o[...]

NOTE: Even if the transmission can be reset, we recommend that you visit a dealer at your earliest possible convenience. Y our dealer has diagnostic equip- ment to determine if the problem could r ecur . Have the transmission checked at your authorized dealer as soon as possible. If the problem has been momentary , the transmission can be reset to [...]

• An UPSHIFT message will appear in the Electronic V ehicle Information Center (EVIC) portion of the in- strument cluster when using Autostick 威 . This message appears in order to alert the driver to upshift to the next gear . The UPSHIFT message will display while operating the vehicle at higher engine revolutions-per - minute (RPM). Y ou can [...]

DRIVING ON SLIPPER Y SURF ACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the rear wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the rear (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is dange[...]

P ARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. W ARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. When parking on a flat surface, place t[...]

NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A chil[...]

When the vehicle is driven over 7 mph (1 1 km/h), you may also hear a slight clicking sound as well as some related motor noises. These noises ar e the system per- forming its self check cycle to ensure that the ABS system is working properly . This self check occurs each time the vehicle is started and accelerated past 7 mph (1 1 km/h). ABS is act[...]

All vehicle wheels and tires must be the same size and type and tires must be pr operly inflated to produce accurate signals for the computer . Anti-Lock Brake Light The ABS light monitors the Anti-Lock Brake Sys- tem. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the AB[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to t[...]

W ARNING! The ABS (Anti-Lock Brake System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ABS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attenti[...]

W ARNING! The BAS (Brake Assist System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevail- ing road conditions. The BAS cannot prevent acci- dents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attent[...]

W ARNING! The ESP (Electronic Stability Program) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe,[...]

Full Of f This mode is intended for off-highway or of f-road use only and should not be used on any public roadways. In this mode, all TCS and ESP stability featur es are turned off. T o enter the “Full Off” mode, depress and hold the “ESP OFF” button for 5 seconds while the vehicle is stopped with the engine running. After 5 seconds, a chi[...]

W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP is unavailable. In an emer - gency evasive maneuver , the ESP system will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for of f-highway or off- road only . Synchronizing ESP The malfunction indicator light for the ESP is co[...]

NOTE: • ⬙ The ⬙ ESP/TCS Indicator Light ⬙ and the ⬙ ESP/BAS Malfunction Indicator Light ⬙ will turn on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned off pr eviously . • The ESP Contr ol System will make buzzing or clicking sounds when it[...]

NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewa[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = [...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If th[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the [...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Load[...]

manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: The following table shows examples on how to calculate total load, cargo/luggage, and towing capaci- ties of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may[...]

228 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and r esults in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabili[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as[...]

W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires W ARNING! Combining radial ply tires with other types of [...]

T read Wear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tir e [...]

Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressur e. The manu- facturer str ongly recommends that you use tir es equiva- lent to the originals in size, quality and performance when replacement is needed (r efer to the parag[...]

CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear . • Uneven tire wear , such as feathering and one-sided wear . • V ehicle pull to right or left. T ires may also cause the vehicle to pull to [...]

CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immediately if noise occurs that could indicate chain br[...]

Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). TIRE ROT A TION RECOMMENDA TIONS T ires on the front and r ear axles of vehicles operate at differ ent loads and perform differ ent steering, driving, and braking functions. For the[...]

Tire Rotation — Standard T ires The suggested rotation method is the “side-to-side” as shown in the following diagram. Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cross” as shown in the following diagram. 238 ST ARTING AND OPERA TING[...]

TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recommended cold placar d pressur e. • The tire pr essure will vary with temperatur e by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature de[...]

− For example, your vehicle may have a recom- mended cold (parked for more than 3 hours) placar d pressur e of 30 psi (207 kPa). If the ambient tempera- ture is 68°F (20°C) and the measur ed tire pr essure is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tir e pressure to appr oximately 23 psi (157 kPa). This tire pr [...]

NOTE: • The TPMS is not intended to replace normal tir e care and maintenance, or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failur e. Under-i[...]

receives the updated tir e pressur es, the system will automatically update and the T ire Pressur e Monitoring T elltale Light will turn off. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. Low pressur e in the spare tire will not cause the T ire Pressur e Monitoring [...]

The TPMS consists of the following components: • Receiver Module • 4 T ire Pressur e Monitoring Sensors • 3 T rigger Modules (mounted in three of the four wheel-wells) • V arious T ire Pr essure Monitoring System Messages, which display in the Electronic V ehicle Information Center (EVIC) • T ire Pressur e Monitoring T elltale Light T ire[...]

NOTE: • Y ou can change the pressur e units to display in PSI, kP A, or BAR. Refer to “Language,” under “Personal Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual for details. • The compact spare tir e (if so equipped) does not have a tire pr essure monito[...]

Center (EVIC) will display a ⬙ CHECK TPM SYSTEM ⬙ message for 3 seconds when a system fault is detected. In the event that a fault occurs because the system did not receive a pr essure value fr om one or more T ire Pressur e Monitoring Sensors, the EVIC will display the ⬙ CHECK TPM SYSTEM ⬙ message and then display dashes (- -) in place of [...]

The tire pr essure sensors ar e covered under one of the following licenses: United States ..................... KR5S120123 Canada ........................ 2671-S120123 FUEL REQUIREMENTS 6.1L Engine The 6.1L engine is designed to meet all emissions regulations and pr ovide excel- lent fuel economy and performance when using high-quality premium unl[...]

Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in some areas of the country during the winter months to reduce carbon monoxide emissions. Fuels blended with these oxygenates may be used in your vehicle. CAUTION! DO NOT use gasolines containing M[...]

normal conditions and they would result in additional cost. Therefor e, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law . Using leaded gasoline can impair engine performance, or damage the emission [...]

more than a short period, adjust the ventilation system to force fr esh, outside air into the vehicle. • Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep th[...]

NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly f[...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground whi[...]

VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “V ehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying car go, do not exceed the specified GVWR and GA WR. V ehicle Certification Label Y our vehicle has a certification lab[...]

Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GA WR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation. W eigh it on a commercial scale to[...]

EXAMPLE ONL Y Front Axle Rear Axle Empty W eight 2054 lbs (932 kg) 1805 lbs (819 kg ) Load (Including driver , pas- sengers, and cargo) 271 lbs (123 kg) 579 lbs (263 kg) T otal 2325 lbs (1055 kg) 2384 lbs (1081 kg) GA WR 2546 lbs (1 155 kg) 2708 lbs (1228 kg) NOTE: Refer to the “V ehicle Certification Label” at- tached to the rear of the driver[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 2 5 6 䡵 If Y our Engine Overheats ................ 2 5 6 䡵 TIREFIT T ire Repair .................... 2 5 7 䡵 Jump-Starting Procedur es ................ 2 6 2 䡵 Freeing A Stuck V ehicle ................. 2 6 5 䡵 T owing A Disabled V ehicle ............... 2 [...]

HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel between the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emergency[...]

NOTE: There ar e steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control[...]

The TIREFIT system is located under an access panel in the trunk. 1. Air pump hose 2. Power plug and cable 3. Air pump switch 4. Pressur e gauge 5. TIREFIT sealant bottle 6. TIREFIT sealant hose TIREFIT Location TIREFIT contents 258 WHA T TO DO IN EMERGENCIES[...]

W ARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a[...]

5. Unscrew the valve cap fr om the valve on the deflated tire. 6. Screw the fitting at the end of TIREFIT sealant hose (6) coming from the sealant bottle (5) onto the tir e valve. 7. Insert the power plug (2) into the power point on the instrument panel. 8. Leave the parking brake set and the transmission selector lever in P ARK and start the engin[...]

19. W ith a tire pr essure of no less than 26 psi (1.8 bar) press the air pump switch (3) to 0 (OFF) and turn of f the engine. Then, disconnect the TIREFIT system from the tire and place it back in the vehicle. 20. Release the parking brake and drive the vehicle for approximately 10 minutes to ensur e optimum distribu- tion of the tire sealant with[...]

• Do not operate the electric air pump for more than eight minutes to avoid overheating. The air pump may be used again once it has cooled down. • Replace the TIREFIT sealant bottle (5) once every four years to assure optimum operation of the system. • If TIREFIT is liquid, clean water and a damp cloth will remove the material fr om the vehic[...]

NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals ar e located in the engine compartment for jump-starting. 1. W ear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery in another vehicle, park tha[...]

W ARNING! • Y ou should not try to start your vehicle by push- ing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze. Do not a[...]

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between Reverse and Drive. Usually the least accelerator pedal pressur e to maintain the rocking motion without spinni[...]

TOWING A DISABLED VEHICLE WITHOUT THE IGNITION KEY Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only ap- proved method of towing without the ignition key is with a flat bed truck. Pr oper towing equipment is neces- sary to prevent damage to the vehicle. TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE ([...]

CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • If the transmission is not operative, or if the vehicle is to be towed more than 30 miles (48 km), then the only approved method of towing is with a flat bed truck. Damage to the transmission may result. • D[...]

[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 6.1L Engine Compartment ............... 2 7 1 䡵 Onboard Diagnostic System — OBD II ...... 2 7 2 ▫ Loose Fuel Filler Cap .................. 2 7 2 䡵 Emissions Inspection And Maintenance Programs ............................ 2 7 3 䡵 Replacement Parts ..................... 2 7 4 䡵 Dealer Service ......[...]

▫ W indshield W ashers/Headlight W ashers ..... 2 8 5 ▫ Exhaust System ...................... 2 8 6 ▫ Cooling System ....................... 2 8 7 ▫ Hoses And V acuum/V apor Harnesses ....... 2 9 1 ▫ Fuel System ......................... 2 9 2 ▫ Brake System ........................ 2 9 2 ▫ Automatic T ransmission ................ 2 9[...]

6.1L ENGINE COMP ARTMENT MAINT AINING YOUR VEHICLE 271 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states, which [...]

b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station. If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance servic[...]

CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil Road conditions and your kind of driving affect the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures ar e below 32°F (0°C). • Stop [...]

NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever comes first. Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories [...]

Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can b[...]

Engine Air Cleaner Filter For normal driving conditions, inspect and replace the engine air cleaner filter at the intervals shown on Sched- ule “A.” For vehicles driven frequently in dusty or under severe conditions, inspect and r eplace the engine air cleaner filter at the intervals shown on Schedule “B.” W ARNING! The air induction system[...]

CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly . Contin- ued operation of your vehicle with a severe malfunction could cause the co[...]

• Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very r ough idling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently s[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. K[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information b[...]

Refer to the “Maintenance Schedule” in this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is n[...]

The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant or equivalent directly into the lock cylinder . Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically w[...]

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the [...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

system cleaner . Follow with a thorough rinsing to r emove all deposits and chemicals. Properly dispose of old antifreeze solution. Selection of Coolant Use only the manufacturer’s r ecommended coolant. Re- fer to “Fluids, Lubricants, and Genuine Parts” for the correct coolant type. CAUTION! • Mixing of coolants other than specified HOA T e[...]

Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. P[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove the pressure cap whi[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check cool[...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks ar e present. Components should be replaced immediately if ther e is any evidence of wear or damage that could cause failure. Fuel System The Electronic Fuel Injection high-pr essure[...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks ar e present. NOTE: • Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant operations to facilitate the assembly of hoses to couplings. Th[...]

brakes, fluid level can be expected to fall as the brake pads wear . However , low fluid level may be caused by a leak and a checkup may be needed. Use only manufacturer’s r ecommended brake fluid. Re- fer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type. W ARNING! • Overfilling the brake fluid reservoir can result in s[...]

CAUTION! • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufac- turer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and [...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and chemicals that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your [...]

CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the [...]

Interior Care Use Mopar 威 Fabric Cleaner or equivalent to clean fabric upholstery and Mopar 威 Carpet Cleaner for carpeting. Interior T rim should be cleaned starting with a damp cloth, or Mopar 威 Satin Select. Do not use harsh cleaners or Armorall. Use Mopar 威 T otal Clean to clean vinyl upholstery . Mopar 威 T otal Clean is specifically r[...]

cleaner . Use caution when cleaning the inside rear win- dow equipped with electric defrosters or the right r ear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments, which may scratch the elements. When cleaning the rear view mirr or , spray cleaner on the towel or rag that you are using. Do not spray cle[...]

FUSES (POWER DISTRIBUTION CENTERS) Fuses (Front Power Distribution Center) A power distribution center is located in the engine compartment. This center contains fuses and relays. Cavity Car- tridge Fuse Mini Fuse Description 1 — 20 Amp Y ellow Left High Intensity Dis- charge (HID) Headlight 2 — 20 Amp Y ellow Right High Intensity Discharge (HI[...]

Cavity Car- tridge Fuse Mini Fuse Description 10 — 5 Amp Orange Powertrain Control Module (PCM)/Starter 1 1 — 25 Amp Clear Auto Shutdown/ Powertrain Control Module (PCM) 12 — — — 13 — — — 14 — 25 Amp Clear Powertrain Control Module (PCM) 15 — 20 Amp yellow Injectors, Ignition Coils 16 — — — 17 30 Amp Pink — Anti-lock Bra[...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse hav[...]

Cavity Car- tridge Fuse Mini Fuse Description 1 60 Amp Y ellow — Ignition Off Draw (IOD) 2 40 Amp Green — Battery 3— — — 4 40 Amp Green — Battery 5 40 Amp Green — Heated Seats - if equipped 6 — 20 Amp Y ellow Fuel Pump 7 — 20 Amp Y ellow Amplifier — Subwoofer 8 — 15 Amp Blue Ignition Switch/Airbag Control Module (ACM) 9 — 20[...]

Cavity Car- tridge Fuse Mini Fuse Description 26 — — — 27 — 10 Amp Red Airbag/Airbag Control Module (ACM) 28 — 10 Amp Red Curtain Airbag - if equipped 29 — 5 Amp Orange Anti-lock Brakes Module/Cluster/Front Control Module (FCM)/ Powertrain Control Module (PCM)/Sentry Key Remote Keyless Entry/Stop Lights 30 — 10 Amp Red Door Modules/Po[...]

Cavity Car- tridge Fuse Mini Fuse Description 39 — 10 Amp Red Heated Mirrors - if equipped 40 — 10 Amp Red Heated Seats - if equipped/Inside Rear- view Mirror 41 — 10 Amp Red AC Heater Control/Park Assist - if equipped/T ire Pressur e Monitoring - if equipped 42 30 Amp Pink — Front Blower Motor 43 30 Amp Pink — Amplifier - if equipped/ An[...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse hav[...]

REPLACEMENT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights .............. W 5 W Rear Compartment (T runk) Light ............. 5 7 9 Overhead Console Reading Lights ............. 5 7 8 V isor V anity Lights ..................... A6220 Glove Box Light ......................... 1 9 4 Door Courtesy .......................... 5 [...]

W ARNING! A transient high tension occurs at the bulb sockets of High Intensity Discharge (HID) headlights when the headlight switch is turned ON. It may cause serious electrical shock or electrocution if not serviced prop- erly . See your authorized dealer for service. NOTE: When HID headlights are turned on, ther e is a blue hue to the lights. Th[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. T ail/Stop, T ail, T urn Signal Light, and Backup Light 1. Open the T runk. 2. Remove two fasteners from the back of the tail light assembly . 3. Pull back t[...]

6. Disconnect the electrical connector . 7. Pull the tail light assembly clear from the vehicle to access the bulbs. T urn bulb sockets counter-clockwise to remove. 8. T urn the appropriate bulb and socket assembly counter-clockwise to r emove it from the tail light assem- bly . 1 — T ail/Stop Light Bulb 310 MAINT AINING YOUR VEHICLE[...]

2 — T ail Light Bulb 3 — T urn Signal Light Bulb MAINT AINING YOUR VEHICLE 311 7[...]

9. Pull the bulb out of the socket assembly . 10. Push the replacement bulb into the socket assembly . 1 1. Reinstall the bulb and socket assembly into the tail light assembly , and then turn it clockwise. 12. Reinstall the tail light assembly , fasteners, electrical connector , and trunk liner . 13. Close the trunk. License Light 1. Remove the scr[...]

4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly . 6. Reattach the light to the rear fascia, and then install the screws. FLUIDS AND CAP ACITIES U.S. Metric Fuel (approximate) 6.1 Liter Engine 19 gal- lons 72 liters Engine Oil with Filter 6.1 Liter Engine (SAE 0W -40) 7 qts. 6.6 liters Cooling System[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent Engine Oil (6.1 Liter) For best performance and maximum protection under all types of operating conditions, the manufacture[...]

Chassis Component Fluids, Lubricants, and Genuine Parts Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. Power Steering Reservoir Mopar 威 Power Steer[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 3 1 8 䡵 Maintenance Schedules .................. 3 1 8 ▫ Schedule “B” ........................ 3 2 1 ▫ Schedule “A” ........................ 3 3 1 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

• T axi, police, or delivery service (commercial ser - vice). 〫 • Off-r oad or desert operation. NOTE: If ANY of these apply to you, then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in Schedule “B” in this section. NOTE: If ANY of these apply to you, [...]

Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery , and clean, and tighten the termi- nals as requir ed. • Check the fluid levels of coolant reservoir and brake master cylinder , and add as needed. • Check all lights and all other electrical items for correct operation. • Check rubber seals on [...]

SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 . • Day or night temperatures ar e below 32°F (0°[...]

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX X Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X R[...]

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.[...]

Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XX XX X Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear brake linings and [...]

Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* X Inspect the front and r ear brake linings and r[...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X Replace [...]

Miles 108,000 11 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X X C[...]

Miles 123,000 126,000 129,000 132,000 135,000 (Kilometers) (205 000) (210 000) (215 000) (220 000) (225 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X Check[...]

Miles 138,000 141,000 144,000 147,000 150,000 (Kilometers) (230 000) (235 000) (240 000) (245 000) (250 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X Change[...]

SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear [...]

Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X X X X X Inspect the air cleaner filter and replace if requir ed.* XX X X X Replace the air cleaner filter . X Inspect the front and r ear brake li[...]

Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X [...]

Miles 108,000 1 14,000 120,000 126,000 132,000 (Kilometers) (180 000) (190 000) (200 000) (210 000) (220 000) [Months] [108] [1 14] [120] [126] [132] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and [...]

Miles 138,000 144,000 150,000 (Kilometers) (230 000) (240 000) (250 000) [Months] [138] [144] [150] Change engine oil and engine oil filter . X X X Inspect the air cleaner filter and replace if r equired.* X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X Replace the air conditioning filter . X Rotate th[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 3 8 ▫ Prepar e For The Appointment ............ 3 3 8 ▫ Prepar e A List ........................ 3 3 8 ▫ Be Reasonable W ith Requests ............. 3 3 8 䡵 If Y ou Need Assistance .................. 3 3 8 䡵 W[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center . Any communication to the Manufacturer’s Customer Center should include the following [...]

Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er’s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer’s Service Contracts. If you purchased a manufactur er’s Service Contract, you will[...]

REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may[...]

• Service Manuals. These comprehensive service manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing, and repairing DaimlerChrysler Corporation vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightfo[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car . All Passenger Car T ires Must Con[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe tir[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) ............. 2 1 1 Adding Engine Coolant (Antifreeze) ......... 2 8 9 Adding Fuel .......................... 2 4 9 Adding W asher Fluid .............. 104,106,285 Adjustable Pedals ....................... 1 0 8 Air Cleaner , Engine (Engine Air Cleaner Filter) ................ 2 7 9 Air Conditioner Maintenance .........[...]

Shifting ............................ 2 0 3 Special Additives ..................... 2 9 5 A u t o s t i c k .......................... 205,207 B a l lJ o i n t s ............................ 2 8 4 B a t t e r y ............................... 2 8 1 Emergency Starting .................... 2 6 2 J u m pS t a r t i n g ........................ 2 6 2 K[...]

Check Engine Light ( M a l f u n c t i o n I n d i c a t o r L i g h t ) .............. 2 7 3 Child Restraint ................... 4 7 , 4 9 , 5 2 , 5 3 Child Restraint T ether Anchors ........... 5 0 , 5 2 Child Safety Locks ....................... 2 3 Clean Air Gasoline ...................... 2 4 6 Cleaning Wheels ............................. 2 9[...]

Door Locks ............................ 2 1 Door Locks, Automatic ................... 2 2 Door Opener , Garage .................... 1 1 6 D r i v eB e l t s ............................ 2 7 8 Driving On Slippery Surfaces .................. 2 0 9 DVD Player (V ideo Entertainment System) .... 1 7 4 Electric Remote Mirrors ................... 6 4 Elec[...]

E x t e r i o rL i g h t i n g ........................ 9 5 Filters Air Cleaner .......................... 2 7 9 Air Conditioning .................. 189,283 Engine Fuel ......................... 2 7 9 Engine Oil ....................... 278,314 Engine Oil Disposal ................... 2 7 8 Flashers Hazard W arning ...................... 2 5 6 T urn [...]

Gas Cap (Fuel Filler Cap) .............. 249,272 Gasoline, Clean Air ..................... 2 4 6 Gasoline (Fuel) ........................ 2 4 6 Gasoline, Reformulated .................. 2 4 6 Gauges Coolant T emperature .................. 1 3 9 Fuel ............................... 1 4 1 Speedometer ......................... 1 3 6 T achometer ......[...]

Infant Restraint ....................... 4 7 , 4 8 Inflation Pressur e T ires ................... 1 4 1 Information Center , V ehicle ............... 1 4 4 Instrument Cluster ................... 135,136 Instrument Panel and Contr ols ............. 1 3 4 Instrument Panel Lens Cleaning ............ 2 9 9 Interior Appearance Care ................. 2 9[...]

F o g ............................. 9 8 , 1 3 6 Hazard W arning Flasher ................ 2 5 6 Headlight Switch ...................... 9 5 Headlights ........................ 9 5 , 3 0 7 Headlights On W ith W ipers ........... 9 6 , 1 0 2 High Beam ........................ 9 9 , 1 4 0 High Beam Indicator ................... 1 4 0 I l l u m i n a t [...]

Maintenance Schedule ................... 3 1 8 Schedule “A” ........................ 3 3 1 Schedule “B” ........................ 3 2 1 Malfunction Indicator Light (Check Engine) ...................... 143,273 Manual, Service ........................ 3 4 1 Memory Feature (Memory Seat) ............. 9 0 Memory Seat ...........................[...]

Overhead Console ...................... 1 1 5 Overheating, Engine ..................... 2 5 6 Owner’s Manual (Operator Manual) ......... 3 4 1 Panic Alarm ........................... 1 9 Park Assist System, Rear ................. 1 1 2 Parking Brake ......................... 2 1 0 Parking On Hill ........................ 2 1 0 Passing Light .....[...]

Rear W indow Features ................... 1 9 1 Reclining Front Seats ..................... 8 6 Recorder , Event Data ..................... 4 6 Recreational T owing ..................... 2 5 4 Reformulated Gasoline ................... 2 4 6 Refrigerant ............................ 2 8 3 Reminder , Seat Belt ...................... 3 5 Remote Keyless[...]

Rear Folding ......................... 8 9 R e c l i n i n g ............................ 8 6 Security Alarm (Theft Alarm) ............ 1 5 , 1 4 0 Selection of Coolant (Antifreeze) ......... 288,314 Sentry Key (Immobilizer) .................. 1 2 Service Assistance ...................... 3 3 8 Service Contract ........................ 3 4 0 Servic[...]

T achometer ........................... 1 3 7 T elescoping Steering Column .............. 1 0 7 T emperature Contr ol, Automatic (A TC) ....... 1 8 3 T emperature Gauge, Engine Coolant ...... 139,257 T ether Anchor , Child Restraint .............. 5 0 Theft Alarm (Security Alarm) ............... 1 5 Theft System (Security Alarm) .............. 1 5 [...]

T ransmitter Battery Service (Remote Keyless Entry) ................... 1 9 T ransmitter , Garage Door Opener (HomeLink 威 ) .................... 1 1 6 T ransmitter Programming (Remote Keyless Entry) ................... 1 9 T ransmitter , Remote Keyless Entry (RKE) ...... 1 7 T ransporting Pets ........................ 5 5 T r e a dW e a rI n d i [...]

W indow Fogging ....................... 1 8 9 W indows .............................. 2 5 Power .............................. 2 5 W indshield Defroster .................... 1 8 7 W indshield W ashers ............... 101,102,285 F l u i d .............................. 2 8 5 W indshield W iper Blades ................. 2 8 5 W indshield W ipers ....[...]