Cisco Systems ASR9001s инструкция обслуживания

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco A SR 90 0 1 and Cisco A SR 90 0 1 -S Router s Hardw are Installation Guide May 20 1 3 Text Part Number: OL -26701-02[...]

THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

iii Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 CONTENTS Preface vii CHAPTER 1 Preparing for Installation 1-1 Cisco ASR 9001 Router 1 Cisco ASR 9001-S Router 1 Safety Guidelines 1-2 General Safety Guidelines 1-2 Compliance a nd Sa fety Information 1-3 Laser Safety 1-3 Energy Hazard 1-3 Preventing Electrostat[...]

Contents iv Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 SYNC Port LED Indicators 1-26 RP External USB Po rt 1-27 CHAPTER 2 Unpacking and Installi ng the Chassis 2-1 Pre-Installation Considerations and Req uirements 2-1 Installation Overview 2-1 Required Tools and Equipment 2-2 Unpacking the Cisco ASR 9001 R[...]

Contents v Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Cable Management Bracket 3-14 Installing a Cable Manage ment Bracket 3-1 4 Removing a Cable-Manageme nt Bracket 3-15 Connecting Route Proce ssor Cables 3-16 Connecting to the RP Console Port 3-17 Connecting to the RP Auxiliary Port 3-17 Connecting to the[...]

Contents vi Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Verifying the Trans ceiver Modules 4-15 Advanced Line Card Tro ubleshooting 4-1 7 Troubleshooting the Cooling Subsys tem 4-18 Fan Tray Operation 4-1 8 Power Module F ans 4-18 Over-temperature Conditions 4-19 Isolating Cooling Subsystem Problems 4-19 CH[...]

vii Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Preface This Cisco ASR 9001 and Cisco ASR 9001-S Routers Har dwar e Installation Guid e preface contains these sections: • Changes to This Document, page vii • Audience, pag e vii • Purpose, page vii • Document Or ganization, page viii • Document Con [...]

viii Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Preface Document Organization This installation g uide is or ganized into these chapt ers and appendix es: • Chapter 1, “Preparing for Installation, ” describes safety considerations, required t ools and equipment, an o vervie w of the installation, and[...]

ix Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Preface T imesaver Means the described action saves time . Y ou can sav e time by performing the action d escribed in the paragraph. War ni n g This warning symbol means danger . Y ou are in a situation that could cause bodily in jury . Before you work on any eq[...]

x Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Preface[...]

CH A P T E R 1-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 1 Preparing for Installation Cisco ASR 9001 Router The Cisco ASR 9001 Router is a compact high-capaci ty provider edge (PE) rout er that deli vers 120 Gbps of non-blocking , full-duplex fabric capacity in a two-rack-uni t (2R U) form factor . Simil[...]

1-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Safety Guidelines Figure 1 -2 Front P anel of the Cisco ASR 900 1 -S Rou ter In order to achie ve the full bandwidth of 120 Gbps an d to enable the disabled ports, a Cisco license can be obtained. Once t he license is obta[...]

1-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Safety Guidelines • Alw ays disconnect the po wer source and unplug all power cab les before lifting, movi ng, or working on the rout er . • K eep the work area clear and dust free during and after installation. • K e[...]

1-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Safety Guidelines Preventing Electrostatic Discharge Damage Many rou ter components can be damaged b y static electricity . Not ex ercising the proper electrostatic dischar ge (ESD) precautions can result i n intermittent [...]

1-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines • Do not lift equipmen t alone; hav e another person help yo u to lift the equipment. • Ensure that your fo oting is solid; ba lance the wei ght of the object between your feet. • Lift the [...]

1-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines – Frame is bolted to the floor and is secured to the bui lding structure using either w all brackets or over he ad b ra cke ts . • When mounting the router in a telc o-style rack or 4-post r[...]

1-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Site Wiring Guidelines When planning the locati on of the router , consider distance limitations for si gnaling, electromagnetic interference (EMI), and connector compatibility . If the wiring is[...]

1-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -5 Air Flow P ath through the Cisco ASR 900 1 Rout er When selecting a site to instal l the router , observe these guidelines: • Dust free area—Site should be as dust fre e as poss[...]

1-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -6 Equipment Rac k T y pes Telco 2-Post Rack Item a in Figure 1-6 sho ws a telco-style rack. The telc o-style rack is an open frame consisting of tw o posts tied together b y a cross-ba[...]

1-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figure 1 -7 Cisco ASR 900 1 Router Mounted in a 2-P ost Rack Open 4-Post Rack Item b in Figure 1-6 sho ws a free-standing, 4-post open rack with tw o mounting posts in the fr ont and two mounti[...]

1-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Caution Do not install the Cisco ASR 9001 Rou ter in any type of fully-enclosed rack that does not ha ve the required perforated sides or doo rs; the router require s an unobstructed fl ow of co[...]

1-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -8 ASR 900 1 Clearance Requir ements fo r an Enclosed 4- P o st Rack Installation Temperature and Humidity Guidelines The operating and nonoperating en vironmen tal site requirements [...]

1-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Caution Each Cisco ASR 9001 Router is p owered b y only one type of i nput: A C or DC. A hybrid (A C+DC) power conf iguration is not supported. Caution Proper grounding is necessary to av oid da[...]

1-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -9 AC P owe r Cord CAB-A C Figure 1 -1 0 AC P ow er Cord CAB-L620P -C13-JPN Figur e 1 -1 1 AC P ow er Cord CAB-A CA Connector: IEC 60320 C13 Plug: EL701B 332012 Cordset rating: 15 A, [...]

1-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -12 AC P ow er Cord CAB-A CI Figur e 1 -13 AC P ow er Cord CAB-A CR Figur e 1 -14 AC P ow er Cord CAB-A CS Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Connector: IEC 60320 C[...]

1-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figur e 1 -15 AC P ow er Cord CAB-A CU Figur e 1 -16 AC P ow er Cord CAB-A CC Figur e 1 -17 AC P owe r Cord CAB-A CSA 285301 Connector : IEC 60320 C13 Plug: BSI 1363 Cordset rating: 13 A, 250 V[...]

1-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -18 AC P ow er Cord CAB-9K1 0A -EU Figur e 1 -19 AC P ow er Cord SFS-250V -1 0A -IS DC Powered Router Connections to DC power modules are rated at 20 A ma ximum. The system accepts a n[...]

1-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines Figure 1-20 sh ows the ty pe of terminal block required fo r DC-input cable connections. Figur e 1 -20 DC P ow er Cable T er minal Block Figure 1-21 sh ows DC po wer source cable connections fo[...]

1-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Site Requirement Guidelines Figur e 1 -21 DC Po wer Sour ce Cabling Sc heme for a Single DC P ower Module The color coding of the source DC po wer cable leads depends on the color coding of the site DC po wer source. Becau[...]

1-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Site Requirement Guidelines NEBS Supplemental Unit Bonding and Grounding Guidelines Although the router chassis requires a safety earth ground connection as part of the power cabli ng to po wer modules, you must permanent[...]

1-21 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines • One grounding wire. Alt hough we recommend at le ast six A WG multistrand copper wire, the wir e diameter and len gth depend on your router locat ion and site en vironme[...]

1-22 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines T able 1 -2 Cisco ASR 90 0 1 Router F ront P anel Por ts Description Port Name Connector T ype Description TOD Port RJ45 Time of Day Inpu t/Output Port along with 1PPS Sign[...]

1-23 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines Console Port and Auxiliary Port Connection Guidelines The RP has two E IA /TI A-2 32 (fo rme rly RS232) serial RJ-45 connection ports (see Fi gure 1-23 ): • Console port?[...]

1-24 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines Auxiliary Port Signals The RP Auxiliary (A UX) port is a RJ-45 interface for connecting a modem or other data communication equipment (DCE) device (such as another router) [...]

1-25 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines Management LAN Port LED Indicators The Management LAN connectors ha ve integral LED indicators (see Figure 1-24 ). When lit, these LEDs indicate: • Green (LINK)—Con nect[...]

1-26 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines Figur e 1 -25 Straight-Thr ough Cable Pinout to a Hub, Repeater or S witch When connecting to a router , us e th e cr o ss ov er c ab l e p i n ou t sh ow n i n Figure 1-26[...]

1-27 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 1 Pre paring for Installation Cisco ASR 9001 Router Port Connection Guidelines • in J.211 mode: – Green — DTI is operating in no rmal mode. – Amber — DTI is operating in f ast mode. Figur e 1 -27 S YNC Po rt Connector RP External USB Port The[...]

1-28 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 1 Preparing for Installatio n Cisco ASR 9001 Router Port Connection Guidelines[...]

CH A P T E R 2-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 2 Unpacking and Installing the Chassis This chapter contains the procedures for installing the router in a rack . Th e installatio n is presente d in these sections: • Pre-Installation Consid erations and Req uirements, page 2-1 • Installation [...]

2-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 2 Unpacking and Installing the Chassis Unpacking the Cisco ASR 9001 Router Required Tools and Equipment Before you be gin the rack-mount installati on, you must read and understand the i nformation in the “Rack-Mounting and Air Flow Clearance Guideli[...]

2-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 2 Unpacking and Installin g the Chassis Unpacking the Ci sco ASR 9001 Router Figure 2-1 Unpacking the Cisco ASR 900 1 Ro uter fr om the Shi pping Contai ner Positioning the Router Use a safety hand truck to mo ve the router to the location wh ere it is [...]

2-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 2 Unpacking and Installing the Chassis Rack-Mounting the Router Chassis Rack-Mounting the Router Chassis The router chassis is installed in a f ront-mounted posi tion, as sho wn in Figure 1-7 for the Cisco ASR 9001 Router chassis. In a front-mount ed p[...]

2-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 2 Unpacking and Installin g the Chassis Rack-Mounting the Rou ter Chassis This section descri bes how to install th e chassis in a 2-post telco-style rack. Figure 2-3 sho ws the orie ntation of the Cisco ASR 9 001 Router chassis to the ra ck posts and c[...]

2-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 2 Unpacking and Installing the Chassis Rack-Mounting the Router Chassis Use this procedure to install th e chassis in the equipment ra ck: Step 1 W ith two people’ s aid, lift the chassis i nto the rack holding top and bottom of the chassis (see Figu[...]

2-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 2 Unpacking and Installin g the Chassis Supplemental Bonding and Ground ing Connection s Installing the Chassis in a 4-post Rack T o mount the Cisco ASR 9001 Router chassis in a 4-post open rack, two side brac kets must be attached to the chassis and th[...]

2-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 2 Unpacking and Installing the Chassis Supplemental Bonding and Grounding Conne ctions Use this procedure to attach a grounding cable lu g to the router: Step 1 Insert the groundin g screws through the locking wash ers, and into the thread ed grounding[...]

CH A P T E R 3-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 3 Installing Modules and C ables in the Chassis This chapter contains the procedures for installing cards an d modules into th e chassis, after it has been installed in a rack. It also describes how to connect ca bles to the ports and RP . The inst[...]

3-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Modular Port Adapte rs Figure 3-1 .4x1 0 -Gigabit Ether net SFP+ Por t s Modular Port Adapters The Cisco ASR 9001 Router has two ethernet plug gable ports that supp ort these Modular Port Adapters (MP As)[...]

3-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Modular Port Adapte rs Figur e 3-2 20-Port Gigabit Ethe r net Modular P ort A dapter Ta b l e 3 - 1 describes the 20-Port Gi gabit Ethernet modu lar port adapter LEDs. 4-Port 10 Gigabit Ethernet Modular Po[...]

3-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Modular Port Adapte rs Figure 3-3 4-Por t 1 0 Gigabit Ethernet Modular P ort Adapter Ta b l e 3 - 2 describes the 4-Port 10 Gigabit Ethernet modular port adapt er LEDs. 2-Port 10 Gigabit Ethernet Modular [...]

3-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing Modular Po rt Adapters Figure 3-4 2-Por t 1 0 Gigabit Ethernet Modular P ort Adapter Ta b l e 3 - 2 describes the 2-Port 10 Gigabit Ethernet modular po rt adapter LEDs. Installing a[...]

3-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing Modular Port Adapters • Checking t he Installati on, page 3-8 Handling Modular Port Adapters (MPAs) Each modular port adapter (MP A) circuit board is mounted on a metal carri er [...]

3-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing Modular Po rt Adapters 3. Execute the do show plat command to ve rify that the MP A to be removed is in the disabled state. 4. Physically remo ve the MP A to be replaced. 5. Physica[...]

3-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing Modular Port Adapters Note The modular port adapter (MP A) will slide easily into the slot if i t is properly aligned on the tracks. If the modul ar port adapter (MP A) does not sl[...]

3-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing Modular Po rt Adapters When the system has reinitialized all interfaces, the modular port adapter (MP A) ST A TUS LEDs should be on (green). The port LEDs (C/A and A/L) may be on (g[...]

3-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Installing and Removing Modular Port Adapters Step 5 Use the show ver sio n command to obtain softw are version i nformation for the installed mod ular line cards (MLCs) as well as interfaces av ailable [...]

3-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Installing and Removing SFP Modu les The ping command sen ds an echo request out to a remote de vice at an IP address that you specify . After sending a series of signals, the command w aits a specif ied [...]

3-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Cable Management Cable Management Cisco ASR 9001 Router includes a cable-management system that or ganizes the interface cables entering and e xiting the router , keeping them out of the w ay , and free [...]

3-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Cable Management Figure 3-7 Cable-Manag ement T r ay Installation and Remo v al Step 3 Insert and tighten t he captiv e scre w(s) to secure the tray . (see Figure 3-7 ). Step 4 Connect all the cabl es to [...]

3-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Cable Management Cable Management Bracket The Cisco ASR 9001 Router pro vides a cable management brack et at the middl e of the rout er chassis. Figure 3-8 sho ws a typical cable routin g for the Cisco A[...]

3-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Cable Management Figure 3-9 Cable-Manag ement Brac ket Installation and Remov al Step 3 Insert and tighten the captiv e screw(s) to secure the bracket. (see Figure 3-9 ). Step 4 Connect all the cables to [...]

3-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Connecting Route Pro cessor Cables Connecting Route Processor Cables This section describes ho w to connec t cables to the console, auxiliary , and Ethernet ports on the RP . The console and auxiliary po[...]

3-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Connecting Route Processor Cab les Connecting to the RP Console Port The system console port on the RP is an RJ-45 recep tacle for connecting a data terminal to perform the initial conf iguration of the r[...]

3-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Connecting Power to the Router Caution Ethernet management ports are primaril y used as T e lnet ports into the Cisco ASR 9001, and for boo ting or accessing Cisco so ftware images over a network to whic[...]

3-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Connecting Power to the Router Step 4 Plug the A C power cord into the recept acle at the front of the chassis (see Figure 3-11 ). Step 5 Close the cable wrap to secu re the A C power cord plug to the po [...]

3-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Connecting Power to the Router Connecting Power to a DC-Powered Router This section contains the pr ocedures to connect th e DC source po wer cables to a DC -po wered router . The color coding of source [...]

3-21 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 3 Installing Modul es and Cables in the Chassis Powering on the Router Figure 3-12 T ypical Po wer Connection s f o r a Single DC P owe r Module Step 4 Proceed to the “Powering on the Ro uter” section on page 3-21 . Powering on the Router Use this [...]

3-22 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 3 Installing M odules and Cables in the Chassis Powering on the Router[...]

CH A P T E R 4-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 4 Troubleshooting the Installation This chapter contains g eneral troubleshoot ing information to help isolate the cause of an y dif fi culties you might encounter durin g the installation and ini tial startup of the system. Although an o ver -temp[...]

4-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshootin g Overview For trou bleshooting purposes in this chap ter , the router consists of these subsy stems: • Po wer subsystem—Router chassis i s shipped with up to tw o A C-input or DC-input po wer supp[...]

4-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem Troubleshooting the Power Subsystem This section contains inf ormation to troubleshoot the po wer subsystems: • T roubleshooting the A C-Input Power Subsystem, page 4-3 • T roub[...]

4-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem Figur e 4-1 P ower Module Status Indicat ors Use this procedure to troubleshoot th e A C power mo dule if it is not operating proper ly: Step 1 Make sure the po wer module is seate[...]

4-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem • F AIL (amber) LED —Indicates the power suppl y fail ure, includes ov er volt age, ov er current, over temperature and f an failure cond itions. If the F AIL LED is blinking, i[...]

4-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem Additional Power Subsystem Troubleshooting Information This section contains additional troubleshootin g information to help you isol ate the cause of a po wer problem. Hardware an[...]

4-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Power Subsystem 0/RSP0/* host 5.0V 5000 n/a host VP3P3_CAN 3299 n/a host 0.75V 750 n/a host 3.3V_RSP 3299 n/a host 2.5V_RSP 2499 n/a host 1.8V_RSP 1799 n/a host 1.5V_RSP 1500 n/a host 1.2V_RSP 1199[...]

4-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Power Subsystem host 1.8V_ZAR_LDO 1799 n/a host 3.3V_ZAR_LDO 3300 n/a host 2.5V_SKT_SKM 2500 n/a host 1.8V_LGTNG 1800 n/a host 1.5V_NP4C_1 1500 n/a host 1.5V_SKT 1500 n/a host 1.05V_NP4C_CORE 1050[...]

4-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Route Processor Subsystem • If the fan tr ay is still not operating, there could be a problem with either the fan tray o r with the +12 VDC distrib ution through backplane. • Contact your Cisco[...]

4-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Rou te Processor Subsystem RP Front Panel Indicators The RP card has eight discrete LED i ndica tors for display of system information. Ta b l e 4 - 3 lists the display d efinitions o f the eight[...]

4-11 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Route Processor Subsystem Ethernet Ports and Status LEDs The RP has two 8-pin media- dependent interface (MDI) RJ-45 Management LAN ports for 10 Mbps, 100 Mbps, and 1000Mbps Ethernet connections. [...]

4-12 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Line Card Monitoring Critical, Major, and Minor Alarm Status Alarms warn of: • Overtemperature con dition on a componen t in the card • Fan failure in the fan tr ay • Overcurrent condit ion[...]

4-13 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Line Card Configuring and Troubleshooting Line Card Interfaces After the person who installed the h ardware v erifies th at the line card i s working pr operly b y examining the LEDs, the network [...]

4-14 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Line Card Line Card Interface Address A Cisco ASR 9001 Router identifies an interface ad dress by its rack number , line card slot number , instance number , and port number , in the format rac k[...]

4-15 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Line Card RP/0/RSP0/CPU0:router(config-if)# no shutdown The no shutdown comm and passes an enable command to t he line card. It al so causes the line card to configure itself based on the most rec[...]

4-16 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Line Card NAME: "module mau 0/0/0/0", DESCR: "XFP" PID: XFP-10G-MM-SR , VID: V02 , SN: ONT1535101F NAME: "module mau 0/0/0/1", DESCR: "XFP" PID: XFP-10G-MM[...]

4-17 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Line Card PID: SFP-GE-S , VID: V01 , SN: FNS15501AJX NAME: "module mau 0/0/1/17", DESCR: "SFP" PID: SFP-GE-S , VID: V01 , SN: FNS155009TE NAME: "module mau 0/0/1/18",[...]

4-18 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Cooling Subsystem Note It is important to collect the sho w tech-support command da ta before doing a reload or po wer cycle. Failu re to do so can cause all information about the problem to be l[...]

4-19 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 4 Troubl eshooting the Installation Troubleshooting the Cooling Su bsystem For additi onal po wer supply troubleshooting information , see the “T roubleshooting t he Po wer Subsystem” section on page 4-3 . Note For the RSP to communi cate properly [...]

4-20 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 4 Troubleshoo ting the Installation Troubleshooting the Cooling Subsystem Step 2 Eject and reseat the fan tray maki ng sure the capti ve scre ws are securely tightened to a torque of 10 +/–1 in-lb. If the fan tr ay still does not funct ion, go to St[...]

CH A P T E R 5-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 5 Replacing Cisco ASR 90 01 Router Components The router is equip ped as ordered and is r eady for inst allation and start up when it is ship ped. As network requirements change, you may need to upgrade t he system by adding or changin g components[...]

5-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing the Fan Tray Online Insertion and Removal The Cisco ASR 9000 Series Router field-replaceable unit s (FR Us) can be removed and replaced with th e po wer on and the system operatin g. T[...]

5-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing AC or DC Power System Components Figur e 5-1 Removing or Installing the F an T ray on the Cisco ASR 9000 Series Rout er Chassis T o install a fan tray into the chassis: Step 1 Lift the [...]

5-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 5 Replacing Cisco ASR 9001 Router Components Removing and Replacing AC or DC Power System Components Power Module Replacement Guidelines The Cisco ASR 9000 Series Router suppor t online insertion and remo val (OIR) for po wer modules. If you are replac[...]

5-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Chapter 5 Replacing Cisco ASR 9001 Router Components Removing a Chassis fro m the Equipment Rack Figur e 5-2 Removing or Installing an A C or DC P ow er Module Installing an AC or DC Power Module T o install an A C or DC po wer module (see Figure 5-2 ): Step 1 [...]

5-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Chapter 5 Replacing Cisco ASR 9001 Router Components Installing a Replac ement Chassis in the Equipment Rack Step 3 Disconnect the po wer from the power modules on the front of the chassi s: Step 4 Disconnect th e supplement al bonding an d gro unding connecti[...]

A-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 APPENDIX A Technical Specifications This appendix lists certain tech nical specificatio ns for the Cisco ASR 9001 Router. The specifications are presented in these tables: • Ta b l e A - 1 , Cisco ASR 9001 Router Physical Specif ications • Ta b l e A - 2 , [...]

A-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Appendix A Technical Specific ations Ta b l e A - 1 lists the p hysical specifications for the Cisc o ASR 9001 Ro uter. Ta b l e A - 2 lists the en vironmental specification s for the Cisco ASR 9001 Router. T able A -1 Cisco ASR 900 1 Router Ph ysical Specific[...]

A-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Appendix A T echnical Specifications Ta b l e A - 3 lists the A C electrical specifi cations for the Cisco ASR 9001 Rout er. Caution Be sure that the chassis conf iguration complies with the required po wer budgets. Failu re to properly verify th e conf igurati[...]

A-4 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Appendix A Technical Specific ations Ta b l e A - 5 lists the AC input voltage range fo r the A C-po wered Cisco ASR 9001 Router (single phase power source). Ta b l e A - 6 lists the DC input v oltage range for the DC-po w ered Cisco ASR 9001 Router. Ta b l e [...]

A-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Appendix A T echnical Specifications Ta b l e A - 9 lists the po wer consumption specificat ions for a fully co nfigured chassis. Caution Be sure that the chassis conf iguration complies with the required po wer budgets. Failu re to properly verify th e conf ig[...]

A-6 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Appendix A Technical Specific ations Ta b l e A - 1 2 lists the supported CWDM SFP transcei vers modules and describes their operating parameters. Ta b l e A - 1 3 lists the supported DWDM SFP transcei vers modules and describes their operating parameters. SFP[...]

A-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Appendix A T echnical Specifications Caution Use only the SFP modules supplied b y Cisco Systems, Inc. with your Ethern et line card. Each SFP module contains an internal serial EEPR OM that is security-programmed b y the SFP manufacturer with information that [...]

A-8 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Appendix A Technical Specific ations Note V er s i on V0 1 a nd V 02 o f t h e XFP-10 GLR-OC192SR 10 - Gi g ab i t Et h er n et m od u l e l i st e d i n Ta b l e A - 1 4 are not supported. Note V ersion V01 and V02 of the XFP-10GZR-OC192LR 10-G igabit Etherne[...]

A-9 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 Appendix A T echnical Specifications D WDM-XFP-46.12 Cisco 10GB ASE-DWDM XFP (100 GH z ITU grid) 1546.1 2 nm 39 D WDM-XFP-44.53 Cisco 10GB ASE-DWDM XFP (100 GH z ITU grid) 1544.5 3 nm 41 D WDM-XFP-43.73 Cisco 10GB ASE-DWDM XFP (100 GH z ITU grid) 1543.7 3 nm 42[...]

A-10 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Appendix A Technical Specific ations[...]

B-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 APPENDIX B Site Log The site log pro vides a historical record of all operation an d maintenance actions performed on the router . Keep your site log at a con venient place near the router where it can be eas ily accessed. The site log mi ght include these entr[...]

B-2 Cisco ASR 9001 and Cisco ASR 9001-S Ro uters Hardware Instal lation Guide OL-26701-02 Appendix B Site Lo g Date Description of Action Performed or Symptoms Observed Initials[...]

IN-1 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 INDEX Numerics 10-Gigabit Ethernet XFP modules specifications A-8 20-Port Gigabit Ethernet Modular Po rt Adapte 3-2 2-Port 10 Gigabi t Ethernet Modu lar Port Adapter 3-4 4-Port 10 Gigabi t Ethernet Modu lar Port Adapter 3-3 A AC-input power connecting 3-18 cur[...]

Index IN-2 Cisco ASR 9001 and Cisco ASR 9001-S R outers Hardware I nstallation Guide OL-26701-02 attaching auxiliary and console port 3-16 bonding and grou nding cable 2-7, 2-8 bonding and grou nding locations 2-8 grounding cable l ugs 2-8 RSP card 3-16 RSP card auxiliary port 3-17 RSP card console port 3-17 RSP card management LAN port 3-17 avoidi[...]

Index IN-3 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 power to AC-powered router 3-18 power to DC-powered router 3-20 RSP card to a hub, repea ter, or switch 1-25 site power to r outer 1-12 supplemental eart h ground 2-8 connector auxiliary port 1-24 console port 1-23 console logs 4-17 console port connecti[...]

Index IN-4 Cisco ASR 9001 and Cisco ASR 9001-S R outers Hardware I nstallation Guide OL-26701-02 replacing 5-2 troubleshooting 4-19 warnings 5-2 Fixed 4x10-Gigabit Ethern et Line Card 3-1 flow control 4-13 FRUs, list 5-1 fully configured 1-4 G Gigabit Ethernet SFP modules copper 3-2 CWDM A-5, A-6 DWDM A-6 grounding ( caution) 1-13 H Handling Modul [...]

Index IN-5 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 M MAC address 4-13 maintaining routers ?? to 5-6 management LAN ports bandwidth li mitations 4-11 cable connection 3-18 cable connection (caution) 3-18 connecting devices to 3-17 description 1-24 LED indicato rs 1-25, 1-26 LEDs (illustration) 4-11 RJ-45 [...]

Index IN-6 Cisco ASR 9001 and Cisco ASR 9001-S R outers Hardware I nstallation Guide OL-26701-02 AC power cord figures 1-13 power supply AC-input current rating A-3 input power rating A-3 line frequency A-3 operation 4-18 rated input voltage A-3 DC-input input current rati ng A-3 input power rating A-3 operation 4-18 rated input voltage A-3 redunda[...]

Index IN-7 Cisco ASR 9001 and Cisco ASR 9001-S Rout ers Hardware Installation Guide OL-26701-02 power-on self-test 4-9 route processor (RP) See RP S safety compliance information 1-3 general guidelines 1-2 SELV circuit connections 3-16 SELV circuit connections 1-21, 3-16 warning 1-21 See also safety serial ports, asynchronous See auxiliary port; co[...]

Index IN-8 Cisco ASR 9001 and Cisco ASR 9001-S R outers Hardware I nstallation Guide OL-26701-02 startup issues 4-2 startup problems 4-1 subsystem approach 4-1 syslog 4-17 temperat ure 4-18 troubleshooting co mmands show context s lot 4-17 show diag slot 4-17 show inventory 4-15 show logging 4-17 show running c onfig 4-17 show stacks 4-17 show tech[...]