Cisco Systems ISR4451XK9 инструкция обслуживания

Cisco Systems, Inc. www .cisc o.co m Cisco has more than 200 offic es worldwide. Addresses, phone num bers, and fax numbers are listed on the Cisco webs ite at www.cisc o.com/g o/office s. Hardware Installation Guide fo r the Cisco 4451 -X Integrated S er vices Router No vem ber 21, 20 13 Text Pa rt Numbe r: OL-27 644-01[...]

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCT S IN THIS MANUAL ARE SUBJECT TO CHA NGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRES ENTED WITH OUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICA TION OF ANY PROD[...]

iii Hardware Inst allation Guide for the Cisco 4451-X Integr ated Servic es Router CONTENTS Preface ix CHAPTER 1 Overview of the Cisco 4451 -X Integ rated Servi ces Router 1-1 About the Cisco ISR 44 51-X 1-1 Safe ty War ning s 1-2 Safety Warning s for Fi nland, Norway and Sweden 1-3 Chassi s Views 1-3 Cisco I SR 4451- X Chassis 1-4 Plat form Summa [...]

Content s iv Hardware Installa tion Guid e for th e Cisco 4451-X Integrated Services R outer Additi onal Slots 1-20 Subslo t/Bay Numberin g 1-20 Gigabi t Etherne t Manageme nt 1-20 About Fi xed Inter faces 1-20 Specif icat ions 1-20 Period ic In spect ion and Cleani ng 1-25 CHAPTER 2 Prepari ng for Router I nstal lation 2-1 Standar d Warning St ate[...]

Content s v Hardware Installa tion Guid e for th e Cisco 4451-X Integrated Services R outer Moun ting t he R oute r in a Rac k 3-7 Groundi ng the Chass is 3-9 Settin g t he Ch assis on a Des ktop 3-10 Chassi s Ground ing 3-11 Connect ing Powe r 3-12 Connect ing to AC Power 3-13 Connect ing to a Consol e Termi nal or Modem 3-14 Connect ing to t he S[...]

Content s vi Hardware Installa tion Guid e for th e Cisco 4451-X Integrated Services R outer Gatew ay o f La st Re sort 4-13 Config urati on Exa mples 4-1 5 Config urin g Virt ual Termi nal Li nes for Remot e Conso le Acces s 4-16 Config urati on Exa mples 4-1 7 Config urin g the Auxi liary Line 4-17 Verif ying Net work Con nectivi ty 4-19 Saving Y[...]

Content s vii Hardware Installa tion Guid e for th e Cisco 4451-X Integrated Services R outer Overvi ew 6-7 LEDs on the NI M-SS D 6-8 Solid St ate Dri ves (SSD) 6-10 Insta lling t he SS D Drive s into the NI M Ca rrier C ard 6-12 Removing the SSD Drive s from th e NIM-SSD 6-13 Removing and Repl acing the Cisco I SR 4451-X NI M-SSD Driv es 6-15 Remo[...]

Content s viii Hardware Installa tion Guid e for th e Cisco 4451-X Integrated Services R outer Insta lling a Com pactFla sh Mem ory C ard 6- 37 Insta lling S FP M odules 6-38 Laser Safe ty Gu idel ines 6-40 Removing SFP Modules 6- 40 Removing , Repl acing, and Inst allin g an Int ernal PoE Card 6-41 CHAPTER 7 Online Ins ertion and Remo val (OIR ) a[...]

ix Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Preface This pre fac e descr ibes the objecti ves, audien ce, or ga nizat ion an d con ventions of this guid e, and the refer ences that ac compan y this do cumen t set. The f ollo wing s ections are prov ided: • Obje cti v e s, page ix • Audien ce, pa ge[...]

x Hardware Installa tion Guid e for the Cisco 4451-X Integr ated Servic es Router OL-27644-01 Organization This gui de includ es the fo llo wing chap ters: Chapter T itle Description 1 Ov ervi e w of t he C isco 4451- X Inte grate d Services R outer Describes the router chassis v iews, information for locatin g the serial number, PID 1 , and UDI 2 [...]

xi Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Conven tions This document uses the follo wing con v entions: Note Means r eader ta ke no te . Ti p Means the followin g information will help you solve a pr oblem . Cautio n Means re a d e r b e c a re f u l . In this situation, you might perform an action t[...]

xii Hardware Installa tion Guid e for the Cisco 4451-X Integr ated Servic es Router OL-27644-01 War ni ng IMPORT ANT SAFET Y INSTRUCT IONS This warning symbol means danger . Y ou are in a si tuation that could cause bodily injury . Before you work on any equipment, be aware o f the hazards in volved with electrical circuit ry and be familiar with s[...]

xiii Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Avvertenza IMPOR T ANTI ISTRU ZIONI SU LLA SICU REZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchi atura, occorre essere al corrente dei pericoli relativ[...]

xiv Hardware Installa tion Guid e for the Cisco 4451-X Integr ated Servic es Router OL-27644-01[...]

xv Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Avi s o INSTR UÇÕES IM PORT ANTES DE SEG URAN ÇA Este símbolo de aviso signi fica perigo. V ocê se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos ris cos que envolvem os ci[...]

xvi Hardware Installa tion Guid e for the Cisco 4451-X Integr ated Servic es Router OL-27644-01[...]

xvii Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 War ni ng When installing the product, please use the pr ovided or designated conne ction cables/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the us e o[...]

xviii Hardware Installa tion Guid e for the Cisco 4451-X Integr ated Servic es Router OL-27644-01 Searching for Cisco Do cuments T o search an HTM L docume nt using a web browser , press Ctrl-F (W indows) or Cmd-F (Appl e). In mo st browsers, the opti on to search w hole words only , in voke case sensitivity , or search forward an d backward is als[...]

CH A P T E R 1-1 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 1 Overview of the Cisco 445 1-X Integrated Services Router About the Cisco ISR 4451-X The Cisco 4451-X Inte grat ed Services Router (ISR) is a modular router with LAN and W AN connec ti vity and supp orts several interface modules, including Ci [...]

1-2 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router S afety Warnings • 1 RJ45 Console • 1 RJ45 A U X port with fu ll modem con trol signa ls • 4 10/100/100 0 RJ-45 Ethe rnet ports (la beled GE 0/0/ 0, 0/0/1, 0/0/ 2, and 0/0/3 ) • 4 1[...]

1-3 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Cha ssis View s War ni ng Ultimate disposal of this product should be handl ed accordin g to all national laws and regulations. Statement 1040 War ni ng Only trained and qualif ied personne[...]

1-4 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Cha ssis View s Cisco ISR 44 51-X Ch assi s Fig ure 1 -1 on page 1 -4 — Bezel v ie w with one PSU Fig ure 1 -2 on page 1 -5 — Bezel vie w with two PS Us Fig ure 1 -3 on page 1 -5 — Ba[...]

1-5 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Cha ssis View s Figur e 1 -2 Bez el side of the Cis co ISR 4451 -X with tw o PSUs Figur e 1 -3 Bac k P anel (I/O Side) Slots and Conne ct ors on the Cisco ISR 44 51 -X 1 Router fan tra y 2 [...]

1-6 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Cha ssis View s Figur e 1 -4 Bez el Side LEDS of the Single PSU Cisco ISR 4451 -X Model 17 SFP Gigabit Ethernet GE 0/0/1 18 LEDs for the GE 0/0/1 inter face 19 RJ45 Gigabit Et hern et por t[...]

1-7 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Locating the Ser ial Numb er, PID, VID and C LEI Platform Summary Figure 1-5 sh ows an interna l view of the Cisco ISR 4451- X with al l the par ts and module loc ation. Figur e 1 -5 Platf [...]

1-8 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Locating the Ser ial Numb er, PID, VID and C LEI mode in Cisco Internet Operating System (IOS) so ftwar e. F or additional infor mation on the U DI or ho w to obtai n a P AK, see the Cisco [...]

1-9 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res The Ci sco Product Identif i cation tool can be acce ssed at the follo wing URL: http://tools.cisco.com/Support/CPI/ind ex.do Hardware Features This secti on describe s [...]

1-10 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res Front Panel Ethernet Ports There a re 4 front panel Ethe rnet por ts. Eac h port indep enden tly suppo rts dual-m edia type s, RJ45 coppe r or SFPs. Dual Mode GE/SFP Po[...]

1-11 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res Internal PoE card The inte rnal PoE daugh ter car d pro vides a to tal of 3 0.8 W atts of po we r across th e 2 p orts. LED Indicators Ta b l e 1 - 1 summarizes the LED[...]

1-12 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res L (rig ht) Ethe rnet ports 2 and 3 and Mana geme nt Ethe rnet Link Green Ethern et cable present an d link establ ishe d with othe r sid e. I/O side Of f No link. S (ri[...]

1-13 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res Remova ble and Intercha ngeab le Modules and Cards T able 1-2 on page 1-15 summa rizes the t ype of removable modules and c ards that can be insta lled in the router to[...]

1-14 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res Internal Slots • Packet V o ice Digi tal Signa l Processo r Module s, page 1-16 • Memory , page 1-16 • Compact Flash , page 1-15 Because of physi cal difference s[...]

1-15 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res Ta b l e 1 - 2 shows the n umber of in ternal and external slots on Cisco ISR 4451-Xs. It also sh o ws the number of EH WICs and SM s that are suppor ted in the ro uter[...]

1-16 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Hardwa re Featu res Packet Vo ice Digital S ignal Proc essor Mod ules The P acket V oice Digital Sign al Processor Modul es (PVDM4s) add addit ional v oice ca pabilities to the Cisco ISR 4[...]

1-17 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router About Slot s and Inte rfaces Fans, Ventilation, and Airflow Chassis Ventil ation An in ternal fan tra y consi sting o f 4 fans p rovides ch assis cooling. An on board tempera ture sensor c[...]

1-18 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router About Slot s and Inte rfaces • In most cases, the router d esignates its in terfaces using a 3- tuple notatio n that lists the slo t, bay , and port. The 3-tupl e v alue is zero based . [...]

1-19 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router About Slot s and Inte rfaces Figur e 1 -9 P or ts and Slots on the Cisco ISR 4 451 -Xs Slot Numbering Slots ar e number ed 0, 1 and 2. • About Slot 0 • About Sl ot 1 and 2 • Addition[...]

1-20 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Specifi cations About Slot 1 and 2 Slot 1 and slot 2 are NIM slot s. All enhanc ed SM slots start with 1. Additional Slots The Cisco ISR 445 1-Xs ha v e t he fo llo wing ad dit ional slo t[...]

1-21 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Specifi cations W eight with A C PS (w/o modul es ) 28. 5 lbs (12. 92 kg ) W eight w ith dual AC-PoE PS (w/o m odules) 30. 0 lbs (13. 6 kg) W eight wit h dual A C + PoE adaptor (w/o mod ul[...]

1-22 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Specifi cations W eight with A C PS (w/o modul es ) 28. 5 lbs (12. 92 kg ) W eight w ith dual AC-PoE PS (w/o m odules) 30. 0 lbs (13. 6 kg) W eight wit h dual A C + PoE adaptor (w/o mod ul[...]

1-23 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Specifi cations Acoustic : Sound Pre ssure (T ypical/Maximum) 54.4 to 67.4 dB A Acoustic : Sound Power (T ypical/Maximum) 62.6 to 74.5 dB A Regu lat ory Safety co mplia nce IEC 60950- 1, S[...]

1-24 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Specifi cations Immunity compl iance CISPR2 4 ITE- Immunity char acteri stics, Limit s and m ethods of measu rement EN 55 024 I TE-Immu nity cha racter istics , Lim its and method s of mea[...]

1-25 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 1 Ov erview of the Cisco 44 51-X Integrated Se rvices Router Perio dic In spectio n and Cl ean ing Periodic Inspec tion and Cle aning Period ic ins pection and c leani ng of the exte rnal surf ace o f the rout er is recom mended t o mi nimiz e the n[...]

CH A P T E R 2-1 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 2 Preparing fo r Router Installation This do cume nt provid es prei nstalla tion i nform ation, s uch a s re commend ation s and requirem ent s that should b e befo re instal ling your router . See the following sec tions to prepare for inst all[...]

2-2 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Stan dard Wa rning S tateme nts War ni ng Ultimate disposal of this product should be handl ed accordin g to all national laws and regulations. Statement 1040 War ni ng Installation of t he equipment must comp ly [...]

2-3 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Stan dard Wa rning S tateme nts War ni ng The plug-socket combination must be ac cessible at all times, because it serves as the main disconnecting device. Statement 101 9 War ni ng Hazardous voltage or energy may[...]

2-4 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Stan dard Wa rning S tateme nts War ni ng Do not touch or bridge the metal contacts on the bat tery. Unintentional discharge of the batteries can cause serious burns. Statement 3 41 War ni ng T o prevent personal [...]

2-5 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Safety Re commen dations War ni ng Do not use this product near water; for exam ple, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or n ear a swimming pool. Statement 1035 War ni ng N[...]

2-6 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Safety Re commen dations War ni ng Do not work on the sy stem or connect or disco nnect cables during periods of lightning activity. Statement 1001 War ni ng Read the installation instructi ons before connecting t[...]

2-7 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation General Site Requirements Preventing E lectrosta tic Discharge D amage Elec trostat ic di sch arg e (E SD) ca n dama ge e quipme nt a nd i mpair e lectri cal circ uitry . It can occu r if electro nic print ed circ[...]

2-8 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation General Site Requirements The Cisco ISR 4451-Xs are desi gned to meet the i ndustry EMC, safet y , and en vir onmen tal stand ards describe d in the R e gulatory , Safety , and Complianc e Information for Cisco 44[...]

2-9 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Rack Requ irem ents Physical Characteristics Be familiar with the physic al charac teristics of the Cisco ISR 4451-X to assist you in placing the system in the p roper l ocation. Ta b l e 2 - 2 shows the weight an[...]

2-10 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Route r Env ironm enta l Requ irem ents Router Environ mental Re quirements Cisco ISR 4 451-Xs c an be placed on a desktop o r installed in a rack. T he locati on of your r outer and the layout of you r equ ipmen[...]

2-11 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Power Guidelines and Requirements Power Guidelines and Requ irements Check th e power at your site to en sure that you are rece i ving “c lean” power (fr ee of spikes and noise) . Install a po wer con ditione[...]

2-12 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Network Cabling Specifications Console and Auxiliary Port Considerations The router includ es an asynchro nous serial cons ole port and an au xiliary port. The conso le and auxiliar y ports provi de acc ess to th[...]

2-13 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Network Cabling Specifications The Ci sco W indows USB Con sole D riv er allows pl ugging and unplug ging t he USB cable f rom the console port witho ut affecting W indows HyperT e rminal ope rations. No special [...]

2-14 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Require d Tools an d Equip ment for Insta llati on and Mai ntenan ce Preparin g for Networ k Co nnections When setting up your router , consider distance lim itations and potenti al electromag netic interfer ence[...]

2-15 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Require d Tools an d Equip ment for Insta llati on and Mai ntenan ce Y ou need the follo wing tools and equ ipment to install and upg rade the router an d its components: • ESD- preventi ve cord an d wris t str[...]

2-16 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation In stallation Checklist Installation Check list The sample installation checklist lists items and procedures for installing a ne w router . Make a copy of this checklist and mark the entries whe n completed. Incl[...]

2-17 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 2 Preparing for Rout er Installation Creating a Site Log Creating a Site Lo g The Site Lo g provi des a reco rd of all actio ns related to the route r . Keep it in an access ible place near the chassi s where an yone who perfor ms tasks has ac cess [...]

CH A P T E R 3-1 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 3 Installing and Conne cting the Router This docume nt descri bes how to i nstall a nd conne ct the Cisc o 4451-X Integrat ed Serv ices Ro uters (ISRs) to LAN, W AN, and V oice networks. The follow ing sections pr ovide technical details. • Inst alli ng t he Rout er , pa[...]

3-2 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er War ni ng This equipment must be grounded. Never def eat the ground conductor or operate the equipm ent in the absence of a suitably installed ground conductor . C ontact the appropriate electrical inspection authority or an electrician [...]

3-3 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er What You N eed t o Know What You Need to Know CLI C onsol e Acces s Use the USB cons ole por t on the rout er to acce ss the Cisco I nter net Operat ing Syst em (IOS- XE) comm and line inter face (CL I) on t he rout er an d per form c on[...]

3-4 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Unpacki ng the Rout er In addi tion, depend ing on the type o f modul es you plan to us e, you might need the f ollowing eq uipmen t to conn ect a p ort to a n ex ternal networ k: • Cables for connect ion to the W AN and LAN ports (de [...]

3-5 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er I nstal ling t he R outer Rack- Mountin g the Ch assis Warning If the rack is provided with stabil izing devices, install the stabilizers befor e mounting or servic ing the unit in the r ack. Statement 1006 War ni ng This equipment must [...]

3-6 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er I nstal ling t he R outer Figur e 3-1 Brack e t Installation f or F r ont Mounting Figur e 3-2 Brac k et Insta llation f or Cent er -Fron t Mounting 1 23-inch SBC 1 bracket s 1. S outhwest ern B ell Corpo rati on (SBC) 2 19-inc h EIA bra[...]

3-7 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er I nstal ling t he R outer Figur e 3-3 Brack et Installation for Bac k Mou nting Figur e 3-4 Brac k et Insta llation f or Cent er -Back Moun ting Mounting the Router in a Rack After y ou attach the rack- mount bra ckets to the rou ter cha[...]

3-8 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er I nstal ling t he R outer Ti p For both the 19 -inch EIA brac kets an d the 23-inch SBC br ackets , start th e lo wer pair of scre w s f irst, and rest the brack ets on the lo wer scre ws while you insert the upper pair of scre ws. Ti p [...]

3-9 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er I nstal ling t he R outer Figur e 3-5 Mounting the Chassis in a Rac k (T ypical) Figure 3-6 shows an installat ion with a chassis rear -forward. Figur e 3-6 Mounting the Chassis in a Rac k, Rear F or war d Grounding the Chassis After the[...]

3-10 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er I nstal ling t he R outer Setting th e Chassis on a Deskto p Y o u can place t he Cisco ISR 44 51-X o n a d esktop, be nch top, or shel f. Note Do not set the chass is in an area w here the hi gh accou stic noi se can be an iss ue. War [...]

3-11 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Chassis Gro unding Chassis Grounding War ni ng This equipment must be grounded. Never def eat the ground conductor or operate the equipm ent in the absence of a suitably installed ground conductor . C ontact the appropriate electrical i[...]

3-12 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting P ower Figur e 3-7 Chassis Gr ound Conne ction on th e Cisco ISR 4 451 -X Chassis Step 4 Connect th e othe r end of the ground w ire to a known re liable e arth ground p oint a t your site. Connecting Power Thi s sect ion e x[...]

3-13 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting P ower War ni ng When installing the product, please use the pr ovided or designated conne ction cables/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and M[...]

3-14 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Conne ctin g to a Consol e Term inal or Mo dem Connecting to a Consol e Terminal or Mo dem The rou ter has a synchrono us seria l ports a nd auxilia ry ports . These po rts provide a dministrative access to the router eit her locally ( [...]

3-15 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Conne ctin g to a Consol e Term inal or Mo dem • no parity • 1 stop bit • no flow control Figur e 3-8 Connecting the USB Con sole Cable to the Cisco ISR 44 51 -X Connectin g to the Cons ole Port with M ac OS X This proce dure desc[...]

3-16 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Installing the Cisco Microsoft Windows USB Device Driver Step 1 Use the Finder to go to Applications > Utilitie s > Te r m i n a l . Step 2 Connec t the OS X USB po rt to the router . Step 3 Ent er the follo wi ng commands to f in[...]

3-17 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Installing the Cisco Microsoft Windows USB Device Driver Installing the Cisco Microsoft Windows X P USB Driver This proc edure shows how to install the Micr osoft W indows XP USB driv er . Before you begin, d ownload the appr opriate dr[...]

3-18 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Uninstalling the Cisco Microsoft Windows U SB Driver Step 3 T he Cis co V irtual Com Ins ta llSh iel d W izard be gi ns. Cl ick Ne xt . Step 4 The Ready to Install the Program windo w appears, Cli ck Install . Note If a User Accoun t Co[...]

3-19 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting to the Au xiliary Port Step 5 Wh en the Insta llShield W izard Comple ted wi ndo w appe ars cl ick Finis h . Uninstallin g the Cisco Microsoft Win dows Vis ta USB Driver This pr ocedure shows you how to uninsta ll the Microso[...]

3-20 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting WAN, LAN, and Voice Interfaces Figur e 3-9 Connecting a Mo dem t o th e Cisco ISR 4 451 -X Step 2 Co nnect t he DB-9 end of th e console cable to th e DB-9 end of the modem adapter . Step 3 Co nnect t he DB-25 en d of the mo [...]

3-21 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting WAN, LAN, and Voice Interfaces War ni ng T o avoid electric shock, do not connect safety extra- low voltage (SEL V) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SEL V circuit s, and W AN p orts cont[...]

3-22 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting WAN, LAN, and Voice Interfaces Ports an d Cabling Ta b l e 3 - 2 summarizes typi cal W AN, LAN, and voic e connec tions for Cisco ISR 445 1-Xs. The connec tions summa rized here are also d escribed i n detail i n the docum en[...]

3-23 Cisco 4400 Se ries Hardware Installation Gui de OL-27644-01 Chapter 3 Installing and Conne cting the Rout er Connecting WAN, LAN, and Voice Interfaces • Position the cabl es carefully , so that the y do not put strain on the connec tors. • Organize cables in bundles so that cable s do not intert wine. • Inspect the ca bles to mak e sure [...]

CH A P T E R 4-1 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 4 Initial C onfiguration This ch apter describe s how to per form th e initia l configurat ion on the ro uter aft er you hav e instal led and connect ed it. It contain s the foll ow ing section s: • Performing the Initia l Conf iguration on th[...]

4-2 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Step 1 Fr om t he Ci sco IOS -XE CL I, e nter the setup command in privileged EXE C mode: Router> enable Password: <password> Router# setup --- System Configuration [...]

4-3 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Step 7 Ent er the vi rtual terminal pa ssw ord, whi ch pre v ents un authen ticated acc ess to the ro uter through port s other tha n the consol e port: The virtual terminal [...]

4-4 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Step 10 Resp ond to the follo wing prompts. Sele ct [2] to sav e the initia l confi guration: [0] Go to the IOS command prompt without saving this config. [1] Return back to [...]

4-5 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Router# configure terminal Router(config)# Using Cisco IOS-XE CLI—Ma nual Config uration This section sho ws you ho w to access the co mmand-line inter face (CL I) to perfo[...]

4-6 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router • Saving Y our Rout er Configur ation, page 4- 20 (R equired) • Saving Backup Copies of Configuration and Syst em Image, pa ge 4-20 (Op tional) Configuring the Router Hos[...]

4-7 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuring the Enable and Enable Se cret Passwords T o provide a n addi tional l ayer of se curity , particula rly for passwords tha t cross t he network or are stor ed on a[...]

4-8 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuring the Console Idle Pr ivileged EXEC Timeout This section describ es how to configu re the console line’ s idle pri vile ged EXEC timeout. By defau lt, the pri vil[...]

4-9 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router DETAILED STEP S Examples The fo llo wing exampl e shows ho w to set the conso le idle privileged EXEC tim eout to 2 minu tes 30 seconds: line console exec-timeout 2 30 The fo[...]

4-10 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router The purpose of this interf ace is to allo w users to perform management tasks on the router; it is an interf ace that should not and ofte n ca nnot f orw ard n etw ork tr af[...]

4-11 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router 4. interface { fa stethernet | gi gabi tet herne t } 0/0/ po rt 5. description string 6. ip address ip-addr ess mask 7. no shutdown 8. end 9. show ip interface brief DETAILE[...]

4-12 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuration Ex amples Confi gur ing th e Gig abit Ethe rnet Inte rface : Ex ample ! interface GigabitEthernet0/0/0 description GE int to HR group ip address 172.16.3.3 255[...]

4-13 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router IP Rout ing Y o u can configure in tegrated rou ting and bri dging (IRB) so the router can ro ute and brid ge simultaneou sly . The router will act as an IP host on the netw[...]

4-14 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router If the router has no inter face on the d efault n etwork, b ut doe s hav e a ro ute to it, it c onsiders this netw ork as a cand idate def ault pa th. The ro ute cand idates[...]

4-15 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuration Ex amples Specifying a Default Route: Ex ample ! ip routing ! ip route 192.168.24.0 255.255.255.0 172.28.99.2 ! ip default-network 192.168.24.0 ! Sample Output[...]

4-16 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuring Virtual Ter minal Lines for Remote Console Access V irtual termi nal (vty) lin es are used to allo w remote access to th e router . This section sho ws yo u ho w[...]

4-17 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuration Ex amples The fo llowing exampl e shows how to co nfigure virt ual te rminal lines w ith a pa ssword: ! line vty 0 4 password guessagain login ! What to Do Ne [...]

4-18 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Performing the Initial Configuration on the Router Configuring a Modem on the A UX P or t for EXEC Dialin Conne ctivit y , tech not e http://www .cisco.com/en/US/tech/tk801/tk36/te chnolog ies_tech_note0918 6a008009 4bbc.sht[...]

4-19 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Verifying Network Connectivity Verifying Netwo rk Connectivity This se ction de scribes how to verify ne twork con nectivity for your ro uter . Prerequisi tes • Complete all pre vious co nfig uration task s in this d ocume[...]

4-20 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Verifying Network Connectivity The fo llo wing display shows sample output for the ping co mman d when you ping th e IP hostnam e donald : Router# ping donald Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to [...]

4-21 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Verifying Network Connectivity SUMMARY ST EPS 1. enab le 2. copy n vram: startup-conf ig { ftp: | rc p: | tftp: } 3. show bootflash: 4. copy {bootfla sh}: { ftp: | rcp: | tftp : } DETAILED STEP S Configuration Ex amples Copy[...]

4-22 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Verifying Network Connectivity 11 drwx 16384 Jun 12 2012 17:31:45 +00:00 lost+found 64897 drwx 634880 Sep 6 2012 14:33:26 +00:00 core 340705 drwx 4096 Oct 11 2012 19:28:27 +00:00 .prst_sync 81121 drwx 4096 Jun 12 2012 17:32:[...]

4-23 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 4 Initial Configurat ion Verifying the Initial Configuration 64241 Oct 09 2012 20:47:59 +00:00 /bootflash/tracelogs/fman-fp_F0-0.log.12268.20121009204757.gz 43 177 Oct 11 2012 19:27:03 +00:00 /bootflash/tracelogs/inst_compmatrix_R0-0.log.gz 44 307 O[...]

CH A P T E R 5-1 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router 5 ROM Monitor Overview and Basic Pro cedures This c hapter provid es an overview of R OM Mon itor concept s and operat ions. This chapte r includes the foll ow ing main topics: • R OM Monit or Overview , page 5 -1 • Ent ering R OM Monitor Mode, page 5 -[...]

5-2 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Ente ring RO M Monito r Mode Admin istration EXEC mode as nee ded. T ypi cally , you set the configurati on regist er usi ng the Cisco I OS XE sof tware pro mpt w hen you need to use ROM Monit or mode . When the m ai[...]

5-3 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Ente ring RO M Monito r Mode Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0 ISR4451/K9 ok 21:06:05 0/0 ISR4400-4X1GE ok 21:04:07 1 ISR4451/K9 ok 21:06:05 2 I[...]

5-4 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Ente ring RO M Monito r Mode Common ly Used R OM Monit or Comman ds Ta b l e 5 - 1 summarizes the commands commo nly used in R OM Monito r . For specif ic instructio ns on using t hese c ommands, refer t o the relev [...]

5-5 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Displayi ng the C onfigur ation R egister S etting help monitor builtin command help history monitor command history meminfo main memory information repeat repeat a monitor command reset system reset set display the [...]

5-6 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Environment Variable Settings Under normal op erat ing cond ition s, you do not need to modi fy thes e v aria bles. Th e y are cleare d or set only w hen you need t o make change s to t he way ROM Moni tor opera tes.[...]

5-7 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Exiting ROM Monitor Mode HDD Status : 0A30 MEFW Version : 6.0.50.1244 System Straps : 00000F00 BE036FF1 B2EB6E8F Hardware Anchor : F01001R06.0116f365a2012-07-17 Certificate : 946944F17906C95E Microloader : MA0001R04.[...]

5-8 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Exiting ROM Monitor Mode DETAILED STEP S Configuration Ex ample rommon 3 > confreg Configuration Summary (Virtual Configuration Register: 0x0) enabled are: [ 0 ] break/abort has effect [ 1 ] console baud: 9600 boo[...]

5-9 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Exiting ROM Monitor Mode Upgrading th e ROMmon for a Router Use t his p rocedur e to u pgrad e the R OMmon on a r outer: Step 1 (Optio nal) Run the show platf orm comm and or the show r om-monitor sl ot command fon t[...]

5-10 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router Chapter 5 ROM Monitor O verview and Basi c Procedures Exiting ROM Monitor Mode --------- ------------------- --------------------- ----------------- 0 ISR4451/K9 ok 21:06:05 0/0 ISR4400-4X1GE ok 21:04:07 1 ISR4451/K9 ok 21:06:05 2 ISR4451/K9 ok 21:06:05 R0 ISR4451/K9 o[...]

CH A P T E R 6-1 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 6 Installing and Upgrading Intern al Mo dules and FRUs This documen t descri bes how to install and upg rade int ernal mo dules a nd field replace able unit s (FR Us) in the Cisc o 4451-X Int egrated Servic es Rout er (ISRs). Th e install an d u[...]

6-2 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs S afety Warnings Safety Warnings War ni ng Read the installation instructi ons before connecting the sy st em to the power source. Statement 1004 War ni ng Only trained and qualif ied personnel sh[...]

6-3 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs S afety Warnings War ni ng Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Statement 1 036 War ni ng Never touch uninsulated telephone wi[...]

6-4 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Accessi ng I nternal Modul es Accessing Internal Mo dules T o access the inte rnal m odules o n the ro uter ., you must f irst remo ve th e chassi s co ver . See the Removing and Repl acing the Ch[...]

6-5 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Locating Internal and External Slots for Modules Step 4 Hold the cov e r at a 45- deg ree angle a nd ins ert the co v er t abs in to the slots along the f ront (bezel) edge of the chass is. See Fi[...]

6-6 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figur e 6-2 Module Locatio ns in Cisc o ISR 4451 -Xs Overview of the SSD Carrier Card NIM (NIM-SSD) This se ction de scribes t he NIM-SSD and how to [...]

6-7 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) • Removing th e SSD D riv es from t he NIM- SSD, pa ge 6-13 • Removing and Repla cing th e Cisco ISR 4451 -X NIM -SSD Drives, pag e 6-15 • Remo[...]

6-8 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) LEDs on th e NIM-SSD Ta b l e 6 - 1 de scribes the LEDs on the NIM-SSD a s shown in Figure 6- 3 . Figure 6-4 sh ows the rear view of the SSD ca rrier[...]

6-9 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Ta b l e 6 - 2 lists the s pecif icati ons of the SSD Carrier Card NIM . T able 6-2 Speci fications of the NIM-SSD Description Specification Phy sica[...]

6-10 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figure 6-4 sh o ws the top of the SSD carrier car d NIM along with the seria l number and label locat ion. Figur e 6-5 T op View of the SSD Car rier[...]

6-11 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figur e 6-6 Solid State Dr ive (SSD) Figur e 6-7 NIM-SS D with T wo Solid Stat e Dr iv es[...]

6-12 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Installing the SSD Drives into the NIM Carrier Card Foll ow th ese steps to insert one or two SSD dri v es into the carrier NIM: Step 1 On the N IM-[...]

6-13 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figur e 6-9 Opening the SSD slot c o ver Step 3 Insert an SSD in the lower slot first. Step 4 The SSD shou ld be in serted connec tor e nd f irst wi[...]

6-14 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figur e 6-1 0 Pulling out the Solid Stat e Dr ives 3 47 3 44 1 1 1. T abs to pull o ut the SSD dri v es[...]

6-15 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figur e 6-1 1 Side V iew of the NIM-SSD T o inser t or rem ove the NIM-SSD into th e Cisco I SR 4451 -X NIM slot 3 , see th e “Remo ving a nd Repl[...]

6-16 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) War ni ng During this procedure, wear ground ing wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or[...]

6-17 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Overview of the SSD Carrier Card NIM (NIM-SSD) Figu re 6-12 R emovin g the NIM-S SD from t he Ro uter Step 2 Usi ng a Phillips scre wdri v er , loosen the capti v e scre ws on either side as show[...]

6-18 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing DDR DIMMs Replacing the NIM -SSD on the R outer T o replace the NIM-SSD on the Cisco ISR 4451 -X, follo w thes e steps: Step 1 Al ign the NIM-SSD carr ier card to the rout[...]

6-19 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing DDR DIMMs Figur e 6-1 4 DIMM Sho wing P olariz ation Notc h 1 Polarization notch 250944 1[...]

6-20 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing DDR DIMMs Remov ing a DIMM Foll ow th ese steps to remov e a DIMM: Step 1 Read the “Sa fety W arni ngs” section on page 6-2 se ction and disc onnect the po wer s upply[...]

6-21 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing DDR DIMMs Installing a DIMM Note U nregistered DIMMS (U DIMMs) and very low profile (VLP) RDIMMs ar e not inter change able. Foll ow th ese steps to install a DIMM: Step 1[...]

6-22 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing DDR DIMMs Figur e 6-1 7 Handling the DIMMs Step 7 Caref ully and f irmly pr ess the DI MM into the co nnector u ntil the latches close onto the DI MM. Mak e sure tha t bot[...]

6-23 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing NIMs and SM s Figur e 6-1 8 Installing a DIMM Step 8 Rep lace the ch assis c ov er . See the “Removing a nd Repl acing the Chassis Cover” section on page 6 -4 . Instal[...]

6-24 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing NIMs and SM s Softwa re Re quirement fo r S Ms Cisco IOS XE software of a spe cified releas e or later re lease is re quired fo r using an SM. T o dete rmine t he versio n[...]

6-25 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing the PVDM 4 Step 6 Check that t he SM is installed co rrectly on the sy stem board. Note For more details on installati on of SMs, NIMs, and Cisco E-Seri es Server Module s[...]

6-26 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing the PVDM 4 • Installing th e PVDM4 on the Cisc o F ourth-Genera tion T1/E1 V oice and W AN NIM in the Cisco ISR 4451-X • Removi ng the PVD M4 from the Cisco F ourth-G [...]

6-27 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing the PVDM 4 Installing the PVDM4 on the Mother board of the C i sco ISR 4451-X Step 1 Read the “Sa fety W arni ngs” section on page 6-2 a nd disc onnect the power suppl[...]

6-28 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing the PVDM 4 Removi ng the P VDM4 from the M otherboa rd of th e Cisc o ISR 4451 -X Step 1 T urn off electrica l power to the router. Leave the power cable plu gged in to ch[...]

6-29 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Installing and Removing the PVDM 4 Step 4 Loo sen an d remo v e the thre e scre ws on the PVDM4. Step 5 Lift the PVDM4 up from the motherbo ard. Step 6 Pla ce the PVDM4 in an an ti-static bag. St[...]

6-30 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Removing and Rep lacing th e USB Flash T oken Mem ory St ick Removin g the PVDM4 from the C isco Fourth-Gen eration T1/E1 Voice and WAN Network Interface Module in the Ci sco ISR 4451-X Step 1 Sh[...]

6-31 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Replacing Power Supplies and Redundant Power Supplies Figur e 6-2 3 Cisco ISR 4 451 -X Flash T ok en Memo ry Stic k Note Y ou can inser t or r emove the m emory stick w hether the r outer i s pow[...]

6-32 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Replacing Power Supplies and Redundant Power Supplies War ni ng Care should be taken while removing the power suppl ies and power inverters (especially in boost mode of operation). If the total p[...]

6-33 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Replacing Power Supplies and Redundant Power Supplies Replacing the Power Su pply on the Cis co ISR 445 1-Xs Cautio n Care sh ould be t aken whi le removin g the power supplie s and power in vert[...]

6-34 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Replac ing a Fan Tray War ni ng Care should be taken while removing the power suppl ies and power inverters (especially in boost mode of operation). If the total power consumpti on is higher than[...]

6-35 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Replac ing a Fan Tray Note If hot-swappi ng the fan tray , it is recommended to c omplete th e operation with in two minutes to e nsure the router re mains within operatin g temperatur e. Step 1 [...]

6-36 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Removing and Installing a Comp actFlash Memory Card Removing and Installing a Co mpactFlash Memory Card This sect ion describe s installing a nd replacin g CompactFlash ( CF) memor y cards in C i[...]

6-37 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Removing and Installing a Comp actFlash Memory Card Step 4 Press the ejec tor b utton nex t to the CompactFlash memory card . The ejector b utton mo ves outw ard so that it projects f rom t he pa[...]

6-38 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs In stalling SFP Modules Installing SFP Modul es This section de scribes how to install optiona l small-fo rm-factor pluggable (SFP) modules in Cisco ISR 4451-Xs to provide optical Gigabit Etherne[...]

6-39 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs In stalling SFP Modules Ti p Use the sho w cont roll er command at the Cisco I OS prompt to determine whether you are using an SFP certif ied by Cisco. DWDM-SFP-4373 1000B ASE-DWDM — 1543.7 3 ?[...]

6-40 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs In stalling SFP Modules Lase r Safety Guidelines Optical SFPs use a small laser to generate the fiber - optic signal. K eep the optical transmit and recei v e ports covered wh enever a cable is n[...]

6-41 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Removing, Replacing, and Installing an Internal PoE Card War ni ng Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with o[...]

6-42 Hardware Installation Guide for the Cisco 4451-X Integrated Services Router OL-27644-01 Chapter 6 Installing and Upgrading Internal Modules an d FRUs Removing, Replacing, and Installing an Internal PoE Card Step 2 Ac cess the PoE card slot. See the “R emo vi ng a nd Re pl acing the Chas sis Co v er” sect ion on page 6-4 . Step 3 Loc ate th[...]

CH A P T E R 7-1 Hardware Installation Guide for the Cisco 4451-X Integrated Service Routers OL-27644-01 7 Online Insertion and Removal (OIR) and Hot-Swapping Online inser tion and remo va l (OIR) enables y ou to replace f aulty modules without aff ecting system operati on, which i s similar to hot -swapping. O IR comman ds are issue d before re mo[...]

7-2 Hardware Installation Guide for the Cisco 4451-X Integrated Service Routers OL-27644-01 Chapter 7 Online Inse rtion and Rem oval (OIR) a nd Hot-Swapp ing OIR Proce dures OIR Procedure s The fol lowing procedur es descr ibe using t he OI R process to remove and re place da ta and voice mo dules. Removing a Module From a consol e terminal issue t[...]