Cisco Systems PGW 2200 инструкция обслуживания

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco PGW 220 0 S of tswitc h Release 9.8 S of tw are Installation and Conf iguration Guide November 20 08 Text Part Number: OL -18083-01[...]

THE SPECIFICATION S AND INFORMATION RE GARDING THE PRODU CTS IN THIS MANU AL ARE SUBJECT TO CHANGE WITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSI BILITY FOR THEIR APPLICATION OF ANY P[...]

iii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 CONTENTS Preface ix Document Objectives ix Audience ix Related Documentation ix Obtaining Documentation and Submitting a Serv ice Request x Document Change History x Preparing for Sun Solaris Operating Syst em and Cisco PGW 2200 Softswitch Software [...]

Contents iv Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Removing the Solstice Dis kSuite 2-88 Installing the Log and Spool File Systems (CSCOh024 ) 2-89 Uninstalling the Log and Spool File System 2-97 Installing Cisco BAMS Archive Partition (CSCOh027) 2-98 Installing the Sparc-based Commun icatio[...]

Contents v Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Adding a User with Minimal MML Privileges 4-12 Configuring SNMP Support Resources 4-13 Migrating the SNMP Configuration to a More Se cure Environment (for Cisco PGW 2200 So ftswitch Release 9.3(2) or Later) 4-14 Basic Tasks 4-14 Before You Ru[...]

Contents vi Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Verifying Datab ase Synchroni zation 4-87 Synchronizing Da tabases 4-88 Checking for Installation Errors 4-88 Reinstalling CSCOga002 4-89 Configuring Cisco ITP-Ls 4-89 Configuring Disk Monitor During Initial Software Co nfiguration 4-89 Conf[...]

Contents vii Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Falling Back to Solaris 8 on the Second Disk Drive 5-28 Restoring the Original Cisco PGW 2200 Softswitch Software 5-32 Falling Back to Previous Cisco PGW 2200 Softs witch So ftware Releases with Platform Changes 5-32 Replacing Hard Disks on[...]

Contents viii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) D-27 Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) D-37 Sample Uninstall Scripts E-1 Removing a Cis co PGW 2200 Softswi[...]

ix Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Preface This pref ace describes the object iv es of th is docume nt and explains ho w to find add itional information on related products and serv ices. It contains the follo wing sections: • Document Objectiv es, page ix • Audience, p age ix •[...]

x Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Preface http://www .cisco.com/en/US/products/hw/ vcallcon/ps2027/produ cts_documentation_roadmap s_list.ht ml Other useful reference publications include • Overviews of the related tel ephony solutions—Desc ribe the Cisco tel ephony solutions with[...]

C HAPTER 1-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation This chapter prov ides checklists de scribing the required and opti onal components, softwa re media, and information yo u must ha ve on hand [...]

1-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Softwa re Installation Solaris 10, Cisco PGW 2200 Softswitc h Software Release 9.8 and Higher Software Release Pr einstallation Checklists Note The target machine mus[...]

1-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PG W 2200 Softswitch Software Installation Solaris 10, Cisco PGW 2200 Softswitch Software Rele ase 9.8 and Higher Softwar e Release Pr einstallation Required Site-Specific Information Y[...]

1-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Softwa re Installation Solaris 10, Cisco PGW 2200 Softswitc h Software Release 9.8 and Higher Software Release Pr einstallation Checklists T able 1 -4 T asks Checklis[...]

C HAPTER 2-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 2 Installing the Sun Sola ris 10 Operating System This chapter pro vides instructions for installin g th e packages that create the Sun Solaris 10 operating system and its operating en vironment on the Sun Netra and Sun Fire platforms. The[...]

2-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Before You Start Before You Start Be sure to read the following cau tions, notes, and tips before i nstalling the Sun Solaris 10 operating system and the operating en vironment. Cautions, Note[...]

2-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System • Installing the Solstice Di skSuite (CSCOh023), page 2- 77 • Installing the Log an d Spool File Systems (CSCOh 024), page 2-89 • Installin[...]

2-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System b. When the machine prompts for a password, type either ^ -d to pro ceed with normal startu p, or the root password for system maintenance. Step 3 [...]

2-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Skipped interface bge0 Beginning system identification... Searching for configuration file(s)... Search complete. Discovering additional network [...]

2-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System - Selecting package (SUNWrsg) - Selecting package (SUNWsadmi) - Selecting package (SUNWsasnm) - Selecting package (SUNWmibii) - Selecting package ([...]

2-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System - Selecting package (SUNWpd) - Selecting package (SUNWced) - Selecting package (SUNWcart200) - Selecting package (SUNWkvmt200) - Selecting packag[...]

2-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWlibms........................done. 311.09 Mbytes remaining. SUNWxwfnt........................done. 299.39 Mbytes remaining. SUNWxwdv...........[...]

2-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWwsr2.........................done. 112.59 Mbytes remaining. SUNWlxml.........................done. 109.19 Mbytes remaining. SUNWlexpt........[...]

2-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWglmr.u.......................done. 37.04 Mbytes remaining. SUNWi2cr.u.......................done. 36.85 Mbytes remaining. SUNWloc.............[...]

2-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWrge..........................done. 3.26 Mbytes remaining. SUNWroute........................done. 2.94 Mbytes remaining. SUNWrpcib...........[...]

2-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Sun Fire V210, No Keyboard Copyright 2005 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.18.5, 2048 MB memory installed, Serial #52030991.[...]

2-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installing the Sun Solaris 10 Opera ting System for Opteron-based Platforms The instructions in this section were wri tten to correspond with th[...]

2-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System f. Sav e your change s and exit the Setup menu. Information simil ar to the follo wing is displayed: SSC Alert: Host System has Reset screen not f[...]

2-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System - Selecting cluster (SUNWCssh) - Selecting cluster (SUNWCpool) - Selecting cluster (SUNWCvld) - Selecting cluster (SUNWCfwshl) - Selecting clust[...]

2-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System - Selecting package (SUNWinst) - Selecting package (SUNWi15rf) - Selecting package (SUNWipc) - Selecting package (SUNWmdbr) - Selecting package (S[...]

2-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Warning: 1062 sector(s) in last cylinder unallocated /dev/rdsk/c1t0d0s5:116599770 sectors in 18978 cylinders of 48 tracks, 128 sectors 56933.5MB[...]

2-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System add link /dev/ipsecesp=../devices/pseudo/ipsecesp@0:ipsecesp add c devices/pseudo/keysock@0:keysock (136, 0) 0666 root sys add link /dev/keysock=.[...]

2-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWxwrtl> was successful. Installation of <SUNWbzip> was successful. 22155 blocks Installation of <SUNWxwfnt>[...]

2-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWopenssl-libraries> was successful. 687 blocks Installation of <SUNWsshcu> was successful. 694 blocks Installation[...]

2-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWtnetc> was successful. 1498 blocks Installation of <SUNWrcmdc> was successful. 4857 blocks Reboot client to ins[...]

2-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Reboot client to install driver. Reboot client to install driver. Reboot client to install driver. Reboot client to install driver. Reboot client [...]

2-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System 2429 blocks Reboot client to install driver. Installation of <SUNW1394> was successful. 1423 blocks Installation of <SUNWxi18n> was [...]

2-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 671 blocks Installation of <SUNWgssk> was successful. 1251 blocks Reboot client to install driver. Installation of <SUNWxge> was succe[...]

2-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWzoner> was successful. 606 blocks Installation of <SUNWluzone> was successful. Installation of <SUNWpoolr>[...]

2-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWeuodf> was successful. 231 blocks Installation of <SUNWless> was successful. 184 blocks Installation of <SUNWc[...]

2-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWmkcd> was successful. Modifying /a/etc/hba.conf Installation of <SUNWfchbar> was successful. 3366 blocks Instal[...]

2-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 497 blocks Installation of <SUNWroute> was successful. 271 blocks Reboot client to install driver. Installation of <SUNWrpcib> was suc[...]

2-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWsshu SUNWlibC SUNWj5rt SUNWwbsup SUNWinstall-patch-utils-root SUNWswmt SUNWmdr SUNWmdu SUNWadmc SUNWnfsckr SUNWnfscr SUNWnfscu SUNWkrbr SUNW[...]

2-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWadp SUNWradpu320 SUNWadpu320 SUNWamr SUNWsprot SUNWrsg SUNWgssdh SUNWgssk SUNWxge SUNWbtool SUNWcslr SUNWidnl SUNWinst SUNWintgige SUNWipc SUN[...]

2-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWsasnm SUNWsadmi SUNWsacom SUNWmipr SUNWmipu SUNWmkcd SUNWfchbar SUNWfchba SUNWfcip SUNWfcmdb SUNWfcp SUNWfcprt SUNWfcsm SUNWfmd SUNWfss SUNW[...]

2-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Completed profile begin script. Processing profile - Selecting cluster (SUNWCreq) - Deselecting cluster (SUNWCudf) - Deselecting cluster (SUNWCbs)[...]

2-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System - Selecting package (SUNWmkcd) - Selecting package (SUNWspnego) - Selecting package (SUNWtnfc) - Selecting package (SUNWtnfd) - Selecting packag[...]

2-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 3149856, 3248288, 3346720, 3445152, 3543584, 3642016, 3740448, 3838880, 3937312, 4035744 - Creating /var (c1t0d0s1) Warning: 4866 sector(s) in las[...]

2-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System add c devices/pseudo/tcp@0:tcp (42, 2) 0666 root sys add link /dev/tcp=../devices/pseudo/tcp@0:tcp add c devices/pseudo/tcp6@0:tcp6 (142, 3) 066[...]

2-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWzlib> was successful. 3826 blocks Installation of <SUNWlibmsr> was successful. Installation of <SUNWlibms> [...]

2-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWadmr> was successful. 3755 blocks Installation of <SUNWadmap> was successful. Installation of <SUNWgssc> [...]

2-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 8 blocks Installation of <SUNWkrbr> was successful. 3840 blocks Installation of <SUNWkrbu> was successful. 259 blocks Installation of [...]

2-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWudapltu> was successful. 559 blocks Reboot client to install driver. Installation of <SUNWudapltr> was successf[...]

2-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 379 blocks Reboot client to install driver. Installation of <SK98sol> was successful. 679 blocks Reboot client to install driver. Installati[...]

2-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWamr> was successful. 2519 blocks Installation of <SUNWsprot> was successful. 190 blocks Installation of <SUN[...]

2-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWnisu> was successful. 45 blocks Installation of <SUNWzebrar> was successful. 4056 blocks Installation of <SUNW[...]

2-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System 918 blocks Installation of <SUNWcpcu> was successful. 29 blocks Reboot client to install driver. Installation of <SUNWcqhpc> was suc[...]

2-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 328 blocks Installation of <SUNWsacom> was successful. 40 blocks Installation of <SUNWmipr> was successful. 468 blocks Installation of[...]

2-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWqlc> was successful. 387 blocks Installation of <SUNWqos> was successful. 136 blocks Installation of <SUNWqo[...]

2-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWadmr SUNWadmap SUNWgssc SUNWgss SUNWopenssl-libraries SUNWsshcu SUNWsshdu SUNWdtdmr SUNWtltk SUNWgzip SUNWsshr SUNWsshu SUNWlibC SUNWj5rt SUNW[...]

2-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWvldu SUNWbash SUNWproduct-registry-root SUNWwsr2 SUNWaac SUNWaccr SUNWaccu SUNWgrub SUNWadmfr SUNWadmfw SUNWi15rf SUNWadp SUNWradpu320 SUNWa[...]

2-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWlldap SUNWlsimega SUNWmdb SUNWmdbdm SUNWmdbr SUNWdtrc SUNWdtrp SUNWfctl SUNWemlxs SUNWemlxu SUNWmibii SUNWsasnm SUNWsadmi SUNWsacom SUNWmipr S[...]

2-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installing boot information - Updating boot environment configuration file - Installing boot blocks (c1t0d0) Installation complete Executing Sol[...]

2-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System This system is configured with NFS version 4, which uses a domain name that is automatically derived from the system's name services. The der[...]

2-51 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Step 4 Reboot your system using the method identif ied for your platform type: • Sparc-based platforms—Enter the boot command and p ress Ent[...]

2-52 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Note On Opteron-based platfor ms, you can select a te rmi nal type from the picklist, or the d efault terminal type (from the seri al port) is use[...]

2-53 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Note This screen may sho w a dif ferent interf ace, de pending on the platform and PC I card that are installed. For detail s, see T able 2-1 on[...]

2-54 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System T ext similar to the follo wing is displayed: - Host Name for bge0 ----------------------------------------------------------- Enter the host name[...]

2-55 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System System part of a subnet ----------------------- [X] Yes [ ] No ------------------------------------------------------------------------------- E[...]

2-56 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System ------------------------------------------------------------------------------- ESC-2_Continue ESC-6_Help Note The system takes approximately 30 s[...]

2-57 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Primary network interface: Yes Use DHCP: No Host name: va-host IP address: 10.74.49.153 System part of a subnet: Yes Netmask: 255.255.255.224 En[...]

2-58 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System - Name Service ---------------------------------------------------------------- On this screen you must provide name service information. Select t[...]

2-59 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Name service: NONE Domain name: Server address(es): Search domain(s): yourdomain.com -----------------------------------------------------------[...]

2-60 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System x [ ] Belize x [ ] Bolivia x [ ] Brazil x [ ] Canada x [ ] Cayman Islands v [ ] Chile press Return to mark it [X]. -------------------------------[...]

2-61 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System - Confirm Information --------------------------------------------------------- > Confirm the following information. If it is correct, press [...]

2-62 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Initializing 992MB of memory at addr 1000000000 Initializing 1024MB of memory at addr 0 Rebooting with command: boot Boot device: /pci@1c,600000/s[...]

2-63 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Step 3 Mount the CD-R OM in the cdrom directory b y entering the follo wing command: # mount -F hsfs -o ro /dev/dsk/ devname /cdrom Where devnam[...]

2-64 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installing SunVTS Framework (Root) as <SUNWvtsr> ## Installing part 1 of 1. /etc/opt/SUNWvts/sunvts.conf.example [ verifying class <none&[...]

2-65 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System /opt/SUNWexplo/tools/vxfs /opt/SUNWexplo/tools/vxvm [ verifying class <none> ] ## Executing postinstall script. /usr/bin/catman is not ava[...]

2-66 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System ## Executing postinstall script. Installation of <SUNWpsr> was successful. Adding <SUNWpcr> Processing package instance <SUNWpcr>[...]

2-67 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Sudo - superuser do(sparc) 1.6.8.5,REV=2006.03.26.16.30 Using </opt> as the package base directory. ## Processing package information. ## [...]

2-68 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUCH DAMAGE. YOU MUST OBSERVE ANY AUTHORS' CONDITIONS WITH RESPECT TO INDIVIDUAL COMPONENTS PROVIDED WITHIN THIS CODE. SUPPORT FOR THE TECHNO[...]

2-69 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System 119963-08 Checking installed patches... Verifying sufficient filesystem capacity (dry run method)... Installing patch packages... Patch 119963-0[...]

2-70 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Done! The following requested patches have packages not installed on the system Package SUNWarc from directory SUNWarc in patch 118833-36 is not i[...]

2-71 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWmdbr SUNWmdr SUNWmdu SUNWnfsckr SUNWnfscr SUNWnfscu SUNWnisu SUNWopenssl-commands SUNWopenssl-libraries SUNWpcu SUNWpd SUNWpiclu SUNWpsu SUN[...]

2-72 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Step 7 Remove the CD from the CD-R OM drive. This comple tes the install ation of platfo rm-specific data. Pro ceed to the “Load ing the Su[...]

2-73 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Installing the Sparc-based Solaris 10 Patches Package (CSCOh022) T o install the Sparc-based Solaris 10 O per ating System P atches pa ckag[...]

2-74 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment The system lists the patches that it wil l install. This list will v ary over ti me. A screen similar to the follo wing is displayed: …. !![...]

2-75 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Note If you used the CD-ROM dri ve to load the So laris 10 patch cluster , eject the CD prior to rebooting. This comple tes the procedures [...]

2-76 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Using </opt/sun_install> as the package base directory. ## Processing package information. ## Processing system information. 10 package[...]

2-77 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment not indicate a problem. Please look at the log file after the rest of the patches are applied Install Solaris 10 patches from set 2 ... Cha[...]

2-78 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Step 1 Load the Cisco Solaris 10 Operat ing En vi ronment CD into t he CD-R O M dri ve. Enter the following command to install the DiskS uite[...]

2-79 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment !! /opt/sun_install/DiskSuite and run the !! install_disksuite_1.sh script as root. !! Installation of <CSCOh023> was successful. Ste[...]

2-80 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment * 14087 accessible cylinders * * Flags: * 1: unmountable * 10: read-only * * First Sector Last * Partition Tag Flags Sector Count Sector Moun[...]

2-81 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment 6 - change `6' partition 7 - change `7' partition select - select a predefined table modify - modify a predefined partition table[...]

2-82 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment 0 - change `0' partition 1 - change `1' partition 2 - change `2' partition 3 - change `3' partition 4 - change `4' p[...]

2-83 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment d3: Mirror is setup d6: Mirror is setup d9: Mirror is setup d12: Mirror is setup d15: Mirror is setup The machine will now reboot. Wait for[...]

2-84 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment mirror to the second disk. It will take some time for the disk to be completely mirrored. Depending on the size of the disk, it may take up t[...]

2-85 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment nvramrc=devalias backup_root /pci@1f,0/pci@1/scsi@8/disk@1,0 Then bring the machine down to the boot prompt # /usr/sbin/shutdown -g0 -y -i0[...]

2-86 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note Disk1 is a system-maintained stan dard for the system's second hard disk. a. If the prtconf command returns the ab ove i nformation[...]

2-87 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment . Executing last command: boot disk1 Boot device: /pci@1f,0/pci@1/scsi@8/disk@1,0 File and args: SunOS Release 5.10 Version Generic_108528-[...]

2-88 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment d12: Mirror Submirror 0: d10 State: Okay Submirror 1: d11 State: Okay Pass: 1 Read option: roundrobin (default) Write option: parallel (defau[...]

2-89 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment This procedure un-mirrors the di sk partitions and remo ves the DiskSuite applicatio n from the platform. Use this procedure if a system ha[...]

2-90 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment T o determine wheth er DiskSuite is installed and configured, run the /usr/sbin/metastat command. If the command is found and it displays t h[...]

2-91 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Step 1 Load the Cisco Solaris 10 Operating En vironment CD int o the CD-R OM drive. From t he /var /tmp directory of th e target machine, i[...]

2-92 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Step 4 Answer y and press Enter to install the f iles. T ext similar to the follo wing is displayed: ## Checking for setuid/setgid programs. [...]

2-93 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment AVAILABLE DISK SELECTIONS: 0. c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1f,4000/scsi@3/sd@0,0 1. c0t1d0 <SUN36G cyl 24620[...]

2-94 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new[...]

2-95 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Enter partition id tag[var]: unassigned Enter partition permission flags[wm]: wm Enter new starting cyl[23157]: 0 Enter partition size[2097[...]

2-96 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk for[...]

2-97 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Uninstalling the Log and Spool File System Use the follo wing procedure if you need to remov e the Log and Spool File system from the secon[...]

2-98 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note If you hav e installed the Solaris DiskSuite pack age (CSCOh023) on your system, the message s below are displayed du ring system boot. [...]

2-99 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment The selected base directory </opt/sun_install> must exist before installation is attempted. Do you want this directory created now [y[...]

2-100 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment The second hard drive will be reformatted by this script, all data on this drive will be lost Do you want to continue with formatting? (y or[...]

2-101 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the [...]

2-102 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Enter partition id tag[unassigned]: unassigned Enter partition permission flags[wm]: wm Enter new starting cyl[2216]: 0 Enter partition size[...]

2-103 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk [...]

2-104 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note The installation of this packag e does not automatically enable ft p communications on your host. If you are installing this soft ware [...]

2-105 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment /opt/sun_install/SolPkg/SUNWnfsckr.tar.gz /opt/sun_install/SolPkg/SUNWnfscr.tar.gz /opt/sun_install/SolPkg/SUNWnfscu.tar.gz /opt/sun_insta[...]

2-106 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment X Window System Optional Clients(sparc) 6.6.2.7400,REV=0.2004.12.15 Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subjec[...]

2-107 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment This package contains scripts which will be executed with super-user permission during the process of installing this package. Do you want[...]

2-108 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment including all modifications or additions, on a medium and in a form allowing fully working executable programs to be produced. 2. Redistribu[...]

2-109 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment 7. USE, MODIFICATION, OR REDISTRIBUTION, OF THIS SOFTWARE IMPLIES ACCEPTANCE OF ALL TERMS AND CONDITIONS OF THIS LICENSE. $Id: LICENSE,v 1[...]

2-110 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILIT[...]

2-111 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment /etc/opt <shared pathname not removed> /etc <shared pathname not removed> ## Updating system information. Removal of <SUNWv[...]

2-112 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment x SUNWvts/reloc/sunwvts/lib/locale/c/LC_MESSAGES, 0 bytes, 0 tape blocks x SUNWvts/reloc/sunwvts/lib/sparcv9, 0 bytes, 0 tape blocks spawn p[...]

2-113 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment ## Installing part 1 of 1. y y y 94197 blocks Installation of <SUNWvtsts> was successful. x SUNWvtsr, 0 bytes, 0 tape blocks x SUNWv[...]

2-114 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment ## Processing package information. ## Processing system information. 5 package pathnames are already properly installed. ## Verifying packag[...]

2-115 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Patch packages installed: SUNWvts SUNWvtsts Installation of patch 137324-01 successful x SUNWnfsckr, 0 bytes, 0 tape blocks x SUNWnfsckr/a[...]

2-116 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Do you want to continue with the installation of <SUNWnfscr> [y,n,?] y Installing Network File System (NFS) client support (Root) as &[...]

2-117 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Processing package instance <SUNWnfsskr> from </tmp> Network File System (NFS) server kernel support (Root)(sparc) 11.10.0,REV[...]

2-118 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note If you need to disable the ftp communications softw are, use the svcadm disable ftp command. If you need to determine the status of the[...]

2-119 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. T[...]

2-120 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment X Window System Optional Clients(i386) 6.6.2.7400,REV=0.2004.12.15 Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject[...]

2-121 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment 7 package pathnames are already properly installed. ## Verifying package dependencies. ## Verifying disk space requirements. ## Checking f[...]

2-122 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment an irrevocable offer to provide a copy of the Source Code for up to three years at the cost of materials and delivery. Such redistributions [...]

2-123 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF [...]

2-124 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE [...]

2-125 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment ## Verifying package <SUNWvtsr> dependencies in global zone ## Processing package information. ## Removing pathnames in class <no[...]

2-126 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment x SUNWvts/install, 0 bytes, 0 tape blocks x SUNWvts/install/checkinstall, 971 bytes, 2 tape blocks x SUNWvts/install/copyright, 93 bytes, 1 [...]

2-127 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Installation of <SUNWvtsr> was successful. ... SunVTS man pages(i386) 6.4,REV=2007.07.05.13.25 Copyright 2007 Sun Microsystems, Inc.[...]

2-128 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Copyright 2007 Sun Microsystems, Inc. All rights reserved. ... Installation of <SUNWnfssr> was successful. ... Network File System (NF[...]

2-129 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment installed with this package NTP software is installed and configured. System reboot is required to activate it. Do you want to reboot now?[...]

2-130 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment 1 CSCOh021 Media Gateway Controller Solaris 10 test for SPARC/Opteron (sparc,i386) 3.0(6) Select package(s) you wish to process (or 'al[...]

2-131 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Using the SunVTS Test Package Use the SunVTS program to test the follo wing: • CPUs • Memory • Ethernet cards Note In order for you [...]

2-132 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Checking to see if rpcbind is running starting rpc services rpcbind giving rpcbind a chance to start Checking to see if vtsk is running star[...]

2-133 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Host Address: 10.0.49.119 Host ID: 18089793 Domain Name: e1000g2(nettest) Host_Name: Host Address: 172.16.101.119 Host ID: 18089793 Domain[...]

2-134 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Central Processor Unit Test all ... Level 1 Data Cache Test all done System Test done Central Processor Unit Test all done Floating Point Un[...]

2-135 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment e1000g3 Total number of network interfaces: 4 Number of DVD/CD drives : 1 CD-ROM/DVD drives : c3t0d0 Number of LOM or TSALARM devices: 0 L[...]

2-136 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment # cd /var/tmp Step 2 Enter the follo wing command to start the test: # /opt/sun_install/vts_script brief Running a Test in Full Mode When ru[...]

2-137 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Removing the VTS Package (CSCOh021) Use the following procedure to remov e the V TS script package from the targ et system after all tests[...]

2-138 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment This completes the Sparc-based Solar is 10 Patch cluster installati on procedures. For Ci sc o PGW 2200 Softswitch Hosts: The Cisco PGW 2200[...]

2-139 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figur e 2-1 Syst em Agr eement Step 2 Accept the agreement in the Figure 2-1 . A windo w similar to the one in Figure 2-2 is displayed. Fi[...]

2-140 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figur e 2-3 W ar ning Message Windo w Step 5 Check the check box and click Ye s on the w arning message windo w . A windo w similar to the o[...]

2-141 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Configuring ILOM on Sun Fire X4600 Platform Configuring the Static IP Address Using the Command Line Interface (CLI) There are sev eral op[...]

2-142 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figure 2-5 Sun Fire X4600/X460 0 M2 Server Back P anel Step 4 Press Enter on the t erminal de vice. The login prompt simil ar to the follo w[...]

2-143 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Start ILOM Using Secure HTTP Follo w the followi ng steps to start the ILOM using secure HTTP . These steps are based on Chapter 4, “Usi[...]

2-144 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Configuring the IP Address with CLI The SP IP address conf iguration with CLI on Sun Netra X4200 M2 platform is t he same as the confi gurat[...]

2-145 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figur e 2-8 LAN Configuratio n in BIOS Set up Utility on Sun N etra X4200 M2 Platf or m Step 6 Choose Static in the IP Assig nment. Step 7[...]

2-146 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figur e 2-9 Sun Integr at ed Lights Out Manager Step 3 Click the Remote Contr ol tab . Step 4 Choose the color settings accordi ngly: • 16[...]

2-147 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figure 2-1 0 Sun IL OM Remote Console This comple tes the ILOM con f igurati on on the Sun Netr a X4200 M2 plat form. An Example of Using [...]

2-148 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figur e 2-1 1 Syst em Output on IL OM Remote Co ntrol C onsole Step 4 Choose the desired console d evice as sh own in Figure 2-12 . Note If [...]

2-149 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figur e 2-12 Console Set tings of the Sun Solar is 1 0 Operating S ystem Installation Note See detailed system output of the i nstallation[...]

2-150 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment[...]

C HAPTER 3-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher This chapter describes how to install Cisco PG W 2200 Softswitch and la ter releases of the Cisco PGW 2200 Softswitch software. This chapter contains the following [...]

3-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Before You Start Cautions, Notes, and Tips Caution T o prev ent the system from running out of disk space during inst allation and to a void remov al of data files a[...]

3-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases [...]

3-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Step 6 Enter y to install the CSCOg u000 utilities packag e on this host. Step 7 T[...]

3-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Use supplied admin file for unattended install? [n] [y,n,?,q] c. Enter y and press[...]

3-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Installing libengif.so Installing libhelp.so Installing libinf.so Installing libmm[...]

3-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases NOTE: Each TimesTen installation is identified by a unique instance name. The inst[...]

3-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Copyright (c) 1996-2006, Oracle. All rights reserved. Type ? or "help" f[...]

3-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Updating parameters for tibco.cfg Updating parameters for tib4pgw.sh Updating para[...]

3-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases ## ISUPV1_POLI ## Q761_CHILE ## Q761_NEWZEALAND ## Q761_THAILAND ## ## Q761_ARGEN[...]

3-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases b. Select the specif ic protocol(s) you need from the tables (instead of selectin[...]

3-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Step 14 Y ou can now be gin conf iguring your Cisco PGW 2200 Softswit ch software[...]

3-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases 4 package pathnames are already properly installed. ## Verifying disk space requi[...]

3-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases T ext similar to the follo wing is displayed: For security reasons, ftp access is[...]

3-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases ************************************************** Do you want to reboot the mach[...]

3-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Installing the License File if the Cisco PGW 2200 Softswitch is NOT Running If th[...]

3-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Installing on a Fault Tolerant System Caution T o ensure the successful installat[...]

3-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Note Always check cisco.c om ( http://www .cisco.com/k obayashi/sw-center/sw-voi [...]

C HAPTER 4-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 4 Configuring the Cisco PGW 2200 Softswitch Software This chapter describe s ho w to configure Release 9.8 of the Cisco PGW 2 200 Softswitch software. Quick Guide to Configuring the Cisco PGW 2200 Softswitch Software Note The Cisco PGW 220[...]

4-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Before You Start Note For further inf ormation on conf iguring the Cisco PGW 2200 S oftswitch software, see the Cisco PGW 2200 Softswitch Release 9.8 Pr ovisioning Guide. Before You Star[...]

4-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Before You Start • Hav e your company's internal sup port and Cisco support contact inform ation readily a vailable so you can get help with the installa tion if needed. (If you h[...]

4-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration Initial Cisco PGW 2200 Softswitch Software Configuration The follo wing required configuration parameters in the XECfgP arm.dat [...]

4-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softs witch Soft ware Configuration T able 4-3 sho ws the Cisco PGW 2200 Soft switch configuratio n parameters. T able 4-3 Confi gurati on P aramet ers Parameter D[...]

4-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration *.SysConnectDataAccess Controls whether data access is enabled or disabled (if the engine attempts to connect to the M MDB or to[...]

4-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softs witch Soft ware Configuration Parameters Required for Initial Setup The follo wing table lists the parameter v alues that must be def ined during the initial[...]

4-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration Note For an e x ample of an up dated configur ation f ile, see the “Updated Conf iguration File Sample” section on page D-11[...]

4-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softs witch Soft ware Configuration A dialog box displays , warning that the MGC En vironment Conf iguration T ool is for initial system confi guration only . Note[...]

4-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration Step 3 Click the Commit b utton after you hav e fini shed setting the parameters. Note The required parameters are the MGC type[...]

4-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring Groups and Use rs If you set the Operational Mode to Acti ve/Standb y , the XECfg pro gram displays a prompt that al lo ws you to transf er the XECfgParm.dat.s la ve file to[...]

4-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring Gr oups and Users # useradd -u UID -g mgcgrp -d /opt/CiscoMGC/local -s /bin/csh -m username UID is a user ID that is an inte ger from 0 through 2147483647 (e xcluding the nu[...]

4-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources T ext similar to the follo wing is displayed: Copyright ? 1998-2002, Cisco Systems, Inc. User has minimal access privileges sh-passat mml> T o exi[...]

4-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources Note SNMP managers su ch as the Ci sco Media G ate way Cont roller Node Manager (Cisco MNM) or HP OpenV ie w can be used to receiv e traps. Note The [...]

4-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources 2. Enter the follo wing commands to restart the snmp daemon: ps -ef |g rep snmpdm The system wil l display the process ID for the snmp daem on. Resta[...]

4-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources b. To c h e c k critagt : # ps -ef |grep critagt If the critagt process is running, te xt similar to the foll owing is di splayed: root 27888 1 0 May[...]

4-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources Adding an SNMP Community Entry Continuing from Step 6 , abov e (of the se ction Runni ng the conf ig-snmp Utilit y ): Step 1 Enter 12 to select snmpC[...]

4-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources ReadAndNotifyToAll usm ApplicationsView - ApplicationsView CiscoInternalSignal snmpv1 All All All CiscoInternalSignal snmpv2c All All All CiscoIntern[...]

4-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources For steps on how t o ex ecute the selections from the SNMPD Configurati on Main Menu, see the f ollow ing sections: • Adding an SNMP Communi ty Ent[...]

4-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources Enter snmpCommunityName: Step 3 Enter an SnmpCommun ityName. Select an SnmpCommu ni tyName from the list that is displayed in Step 1 . The SnmpCommun[...]

4-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources =================== Add Trap Menu =================== 1. TargetAddress: 6.6.6.6:0 , TargetAddrParams: v1ExampleParams , IP Mask: 255.255.255.255:0 Wo[...]

4-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources • V erifying the SNMP Conf iguration Migration, page 4-24 The procedure for adding a T rap Destination is now complete. Proceed to th e selection y[...]

4-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources Step 5 Enter your selection. F or detailed procedures for your selection, refe r to the fo llowi ng list: • Adding an SNMP Communi ty Entry , page [...]

4-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources Verifying the SNMP Configuration Migration Perform the follo wing steps to verify that your changes were applied b y running the conf ig-snmp utility[...]

4-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment #Entry type: snmpCommunityEntry #Format: snmpCommunityIndex (text) # snmpCommunityName (text) # snmpCommunitySecurityName (text) # snmpCommunityCo[...]

4-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment • Initializing the Pro visioning Object Manager , page 4-41 The confi guration data fi le, or XECfgParm.dat f ile (located in /opt/CiscoMGC/etc/X[...]

4-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Note Do not restart the software ye t if you need to conf igure SCP queries or initialize the call screening database. Complete the instructio ns [...]

4-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Ti p If Host X does no t take ov e r call processing after sw itchov er , restart the software on Host Y to take over the calls. Check the paramete[...]

4-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment *.ownT ranspathId T o identify t he local Cisco PGW 2200 Softswitch host in a f ault tolerant system, enter th e same valu e that you used for *.t[...]

4-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Specifying IP Addresses T o specify IP addresses, modify the following parame ters in the fi rst section of the XECfgP arm.dat file: *.transpathId [...]

4-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Note If there are two Ethernet interfaces defined on the Cisco PGW 22 00 Softswitch, it is m andatory to h a ve these on distinct subn ets. For e [...]

4-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Configuring Engine Parameters For the en gine to run correctly , you must modify the follo wing parameters in the Engine section of the XECfgParm.d[...]

4-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment engine.SysCdrCollection Designates the format of CDRs. Va l u e s : • true —In valid for Release 7.4 and abov e. • false —Generat es binar[...]

4-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Setting the Call Cutoff Timer The Cisco PGW 2200 Softswitch call cu toff ti mer is disabled b y default. T o set the call cutof f timer , modify th[...]

4-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Configuring Call Detail Record File Output T o configure call detail record (CDR) f ile output, modify the fol lowin g parameters in the Data Dump[...]

4-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Configuring the Clearing Location and Default Location Parameters The ClearingLocation and DefaultLocat ion paramete rs are used to determine a cal[...]

4-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Parameter Modification ClearingL ocation This property o verrides the Clearing Location fi eld in Call Cont ext. Change this v alue if you need a [...]

4-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment DefaultLocat ion This property ov errides the Defa ult Location f ield in Call Conte xt. Change this v alue if you need to define a customer-specif[...]

4-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Configuring Switchover T o configure switcho ver , modify the follo wing parameters in the fo ve r d section of the XECfgP arm.dat file. : Paramet[...]

4-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment fo verd.ipLocalP ortB T o define the secondary local port number used for IP communication, enter a uniq ue number , keeping the follo wing in mind[...]

4-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Note For more information on swi tchov er , see the Cisco PGW 2200 Softswitc h Release 9 Operations, Maintenance , and T r oubleshooting Gu ide . [...]

4-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries Configuring SCP Queries The SCP translates routing information for t he Adva nced Intelligent Netw ork (AIN) database queries ov er TCAP . This sectio n provides[...]

4-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries • Config uring the trigger .dat File Attributes, pag e 4-43 • Sample trigger .dat File, pa ge 4-45 War ni ng Do not edit trigger .dat file parameters that ar[...]

4-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries Configuring the Trans lation Type Attribute Perform the follo wing steps to conf igure the T ranslation T ype (translationT y pe) attrib ute: Step 1 Back up the [...]

4-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries T able 4-6 $Message Sending T able V alues Sample trigger.dat File #--//****************************************************************************** #--//* * #[...]

4-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #---------------------------------------------------------- # TT 2: Generic LNP #---------------------------------------------------------- 2 2 1 3 0 0 0 0 0 0 0[...]

4-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 7 14 10 16 0 0 0 0 0 0 0 0 #---------------------------------------------------------- # TT 15: INAP LNP Service (Service Key = 1) #-----------------------------[...]

4-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #---------------------------------------------------------- 14 25 0 0 0 0 0 0 0 0 0 0 #---------------------------------------------------------- # TT28 : INAP C[...]

4-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 3 0 0 0 0 0 0 0 0 0 #------------------------------------------------- # MA 9: INAP Prepaid Services InitialDP #-------------------------------------------------[...]

4-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries inap-lnp-norway 17 inap-pp-initdp 18 inap-pp-charge-atexp 19 inap-pp-bcsm 20 inap-pp-charge-texp 21 inap-pp-charge-final 22 inap-lnp-portugal 23 inap-cs1-initdp [...]

4-51 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------- # MS 6: ANSI AIN 800 NPA-NXX-XXX #[...]

4-52 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------- # MS 14: INAP InitialDP Query, Fre[...]

4-53 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------- # MS 22: INAP Prepaid Services App[...]

4-54 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #--------------------------------------------------------------------------------- # MS 30 : ANSI PRE AIN CNAM # tcapType=PRE AIN, msg=query with permission , as[...]

4-55 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---- 6 1 3 1 3 0 6 #--------------------------------------------------[...]

4-56 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------------------------------------------------------------------------------------- ---- 1 2 0 24 1 0 13 #------------------------------------------------[...]

4-57 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # PS 1: Customer 1 LNP #----------------------------------------------------------------------------------------- -----------------------------------------------[...]

4-58 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # PS 9: INAP Free Phone, LNP & Carrier Pre-Selection Services #----------------------------------------------------------------------------------------- ----[...]

4-59 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # PS 17: INAP CS1 ApplyChargingReport #----------------------------------------------------------------------------------------- --------------------------------[...]

4-60 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------------------------------------------------------------------------------------- ---------- # RR 7: ANSI AIN 800 #-------------------------------------[...]

4-61 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---------- 0 13 #-----------------------------------------------------[...]

4-62 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # RR 24: INAP Prepaid Services, Expected Response (Continue, FurnishChargeInformation, ReleaseCall) #------------------------------------------------------------[...]

4-63 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ---------- # RR 33: INAP CS1, Expected Response (Continue, RequestRepo[...]

4-64 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # # F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 # MSG OR1 REQ OR2 REQ OR3 REQ OR4 REQ OR5 REQ OR6 REQ OR7 REQ OR8 REQ OR9 REQ OR10[...]

4-65 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # MR 8: CS1/INAP Based CLI Screening, End Message w/ Connect #----------------------------------------------------------------------------------------- ---------[...]

4-66 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------------------------------------------------------------------------------------- ------------- # MR 16: INAP Prepaid Services, Expected Response (Conti[...]

4-67 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ------------- 4 25 0 30 0 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #----------[...]

4-68 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries ################### $OperationReceiving ################### # # F1 F2 F3 F4 F5 F6 # componentType opClass opCodeFamily opCodeSpecifier opCodeFlag PR #-----------[...]

4-69 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #---------------------------------------------------------------------- 1 1 0 20 1 11 #---------------------------------------------------------------------- # O[...]

4-70 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #---------------------------------------------------------------------- # OR 25: INAP CS1, Expected Response (ReleaseCall) #-------------------------------------[...]

4-71 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # componentType opClass opCodeFamily opCodeSpecifier opCodeFlag PR 1 2 0 47 1 32 #---------------------------------------------------------------------- # OR 37:[...]

4-72 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries 205 1 1 206 1 1 204 1 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #----------------------------------------------------------------[...]

4-73 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------------------------------------------[...]

4-74 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------------------------------------------------------------------------------------- ----------------------------------------------------------------------[...]

4-75 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 211 1 1 212 0 1 213 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #----------------------------------------------------------------[...]

4-76 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # ParameterAssistingSSPIPRoutingAddress, ServiceInteractionIndicators, ItuAsn1EtcLegIDElem,ItuAsn1EtcCallSegmentIDElem,ItuAsn1EtcCarrierElem #-------------------[...]

4-77 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 239 1 1 240 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 #------------------------------------------------------------------[...]

4-78 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #-------------------------------------------------------------------------- 4 1 2 0 0 0 0 0 0 0 0 0 0 0 0 #------------------------------------------------------[...]

4-79 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # RA 15: INAP LNP for Norway, Unexpected Response #-------------------------------------------------------------------------- 4 1 14 0 0 0 0 0 0 0 0 0 0 0 0 #---[...]

4-80 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #-------------------------------------------------------------------------- # RA 28: INAP CS2, Expected Response(DL, SL, MCS,DFCwithArg,RRBE, ML, CWA) #---------[...]

4-81 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #-------------------------- 3 0 0 0 0 # AD 7: CS1/INAP Based CLI Screeing Data for RESULT_ACTION_RE_TRIGGER_VIA_LCM_COND information # Cond Param Val Trg Pic #--[...]

4-82 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database # Act Null Null Null Null #-------------------------- 0 0 0 0 0 # AD 18: INAP LNP for Portugal Data for RESULT_ACTION_SEND_ACTION_TO_LCM informa[...]

4-83 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database • Ported Numbers • Number T ermination • Multiple Dial Plan • Advice of Char ge II Y ou might want to perform w hite and black lis t sc [...]

4-84 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database Network Requirements In most replication schemes, you need to identif y the name of the host machine on which your data store resides. The opera[...]

4-85 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database 192.168.11.2 UK-A-Netra1125-2 192.168.12.2 UK-A-Netra1125-2.hme1 UK-A-Netra1125-2 <----- Peer PGW hostname Peer Cisco PGW 2200 Softswitch Hos[...]

4-86 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database where activehost is the name (not IP address) of your acti ve host. In the example belo w , the acti ve host is hostx and the standb y host is h[...]

4-87 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database Step 5 Enter the numan-rtrv MML command to verify that the entry you added in Step 4 was replic ated to the database on the standby h ost. For e[...]

4-88 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database % ./db_count.sh The output sho ws the ro ws counted in each database table: Counting the rows in each database table. CISCO.ANNOUNCEMENT < 0 [...]

4-89 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring Cisco ITP-Ls Step 2 Check the log f i le for installat ion errors. (The log f ile is in the directory /v ar/adm/MGC_install.log.) Reinstalling CSCOga002 If you experience da[...]

4-90 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Data Dumper Step 4 T o change the percentage of disk usag e at which alarming and disk t rimming is initiat ed, modify the v alue of the diskmonitor .Threshold parameter[...]

4-91 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring th e Data Dumper T o configu re the dmprSink.dat f ile fields, use t he follo wing procedure: Step 1 Log into a Cisco PGW 2200 Softswitch as r oot if you are not already log[...]

4-92 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Data Du mper to Support Cisco BAMS Step 8 Stop and start the ne wly-standby host ( formerly acti ve host). Step 9 Repeat Step 3 and Step 4 for the v ersion of dmprSink.d[...]

C HAPTER 5-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 This chapter describes ho w to migrate your Cisco PGW 2200 Softswit ch to the Solaris 10 operat ing system and Cisco PGW 2200 Softswitch software Release 9.8. Thi[...]

5-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Cautions and N otes • The disks in the system must be at least 18 GB in size. • Y ou (or the person doing the upgrade) must b e an experienced Solaris system [...]

5-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Required Software Note The Cisco PGW 2200 Softswitch supports a li ve upgrade from the Sparc-based platforms to the Opteron-based platfor ms. There is no service [...]

5-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration Overview • /etc/in et/hosts • /etc/in et/netmasks • /etc/inet/ntp.conf Note Y ou may ha ve already recorded some of this informati on based on the[...]

5-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Migration from Release 9.5 or 9.6 to Release 9.8 without Platform Changes Migrating the[...]

5-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes % sudo /etc/init.d/CiscoMGC stop Step 4 Follo w the se steps to back up the system: a[...]

5-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes % /opt/TimesTen/32/bin/ttVersion presenter The Cisco PGW 2200 Softswitch displays outpu[...]

5-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes At this point, the Cisco PGW 2200 Softswitch conf iguration data has been sav ed in M[...]

5-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Caution Do not load Solstice DiskSuite (CSCOh 023) if you are using V eritas V olume Ma[...]

5-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes Step 1 Install the Cisco PGW 2200 So ftswitch software using the instructi ons in th[...]

5-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Note If you want to u se two ne w disks driv es to install the Cisco PGW 2200 Softswit[...]

5-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes % /opt/CiscoMGC/local/mgcbackup -l Caution Y ou must no w mov e the backup f ile to [...]

5-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Step 11 V erify that configu ration files were successfu lly backed up. The mgc_<ho[...]

5-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes Step 2 W ait for the system to return to the boot prompt th en load the Cisco Solari[...]

5-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Step 4 V erify that the files successfully transf er to the remote f ile server befor [...]

5-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes mml> rtrv-c7lnk:all mml> rtrv-iplnk:all Step 11 Enter the follo wing command o[...]

5-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes 4. Remove Configuration Library Version Enter Selection or 'q' to quit> 3[...]

5-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes mml> rtrv-iplnk:all c. Enter the follo wing command on the standb y host to v eri[...]

5-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes migration completed successfully ***finish checking migration... This operation will c[...]

5-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration from Release 9 .7 to Re lease 9.8 without Platform Changes Note If the call replication f ails, or if ne w Acti ve Host is not processing calls, refer [...]

5-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Platforms to Opteron-base d Platforms Note Answer y to the question, “Is the uninstall being d one in order to upgrade to a n[...]

5-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Upgrading Lively fr om Sparc-base d Platforms to Opteron-based Platforms Note No provi sioning is allo wed during the li ve upgrade. Before perfo rming the li ve[...]

5-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Platforms to Opteron-base d Platforms Step 4 Use ftp utility to tran sfer MGC.tar , ttbackup.tar , an d .odbc.in i which are ge[...]

5-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Upgrading Lively fr om Sparc-base d Platforms to Opteron-based Platforms Step 18 Use the follo wing commands to mo ve to the /o pt/CiscoMGC/local directory and s[...]

5-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Platforms to Opteron-base d Platforms CISCO.WHITELIST_A < 1001 > CISCO.WHITELIST_B < 1001 > Step 23 Log in PGW 2 as[...]

5-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back Overview Falling Back Overview Cisco PGW 2200 Softswitch suppor ts both Sparc-base d and Opteron-based platforms on Release 9.7(3) and 9.8(1). Prior[...]

5-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 Step 4 Restore the conf iguration using the follo wing commands: % cd /opt/CiscoMGC/et[...]

5-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 Falling Back to Solaris 8 on the Second Disk Drive If the upgrade is not successful, y[...]

5-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 Step 6 Enter 4 to remov e a disk for replacement. Remove a disk for replacement Menu: [...]

5-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 13 Turn off the spare flag on a disk list List disk information ? Display help about m[...]

5-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 Output format: [Device_Name] c0t0d0 Step 18 T o initialize the disk inst ead of encaps[...]

5-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back to Previous Cisco PG W 2200 Softs witch Software Releases with Platform Changes Step 22 Use the vxprint command to make sure disk0 is remirrored t o[...]

5-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Pla tform # /etc/init.d/CiscoMGC stop Step 4 Remov e the platform from the current network en vironment and replac[...]

5-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Replacing Ha rd Disks on an Existing Solaris 10 Platform Backup Procedure Before restoring the mg cbackup f ile, you must install the same Cisco PGW 2 200 Softsw[...]

5-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Pla tform Caution Be sure to follo w the appropriate anti-static procedures when performing this p rocedure. Step [...]

5-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Replacing Ha rd Disks on an Existing Solaris 10 Platform The hard disk replacement on an existing platform running the Solaris 10 operating system and Cisco PGW [...]

C HAPTER 6-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 6 Configuring the Local Area Network Switch This chapter pro vides a brief ov erview of the local area n etwork (LAN) switches (Cisco Catalyst Switch family) in your solution. The LAN switch conn ects the Cisco PGW 2200 Softswitch hosts to[...]

6-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 6 Configuring the Lo cal Area Network Switch Catalyst 2900 XL Series Catalyst 2900 XL Series See the follo wing web sites for hardware and software documentation for the Ca talyst 2900 XL seri es: http://www .cisco.com/warp/pu blic/cc/pd/si/[...]

A-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX A XECfgParm.dat File Parameters This appendix describes the parameters found in the XECfgParm.dat f ile for the Cisco PGW 2200 Softswitch softw are Release 9.x and ho w they are used b y the media gate way controller (MGC). Understanding th[...]

A-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format • IU A—IUA P arameters • logger—Log Serv er • M3U A—M3U A Parameters • measM—Measurement M anager • mmdb—Main Memory Data Base Process • MML?[...]

A-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format T able A -1 Cisco PGW 2200 Softswitch 9.x XECfgP arm.dat File Configur ation P aramet ers Configuration Parameter Definition *.actiononchargetableaccessfailure Al[...]

A-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.ClearingLocation Specif ies wh ether to override the def ault location f ield in the call context for an y call, regardless of which netwo rk devi ce released th[...]

A-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.CustSpecif icIN APHandling Controls IN AP (Intelligent Network Applicati on Protocol) beha vior , including advertised applicatio n context. Va l u e s : • ti[...]

A-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.DefaultLocation Specifies whether to ove rride the default lo cation field in the call context d ata for calls released by the Cisco PGW 2200 Softswitch. This en[...]

A-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.DisableCCBSov erT unneledQSIG Specif ies the protocol used to deli ver Call Back Services messages ov er the network. V alid V alues: • 0—Callback Services [...]

A-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.GWClearChannelAlgorithm Allo ws the use of the clear channel 64 K unrestrict ed data transfer between g atew a ys. Dif ferent gate ways support diff erent codecs[...]

A-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.ipAddrLocalB Second local IP address; used for checkpointi ng and failo ver heartbeats if you have acti ve/standby Cisco PGW 2200 Softswitch hosts. Note If your[...]

A-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.LISupport Enables Cisco PGW 2200 Softswitch to be used for La wful Intercept. Note Set this parameter to true to enable Cisco PGW 2200 Softswitch support for La[...]

A-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.logPrio Def ines the initial defau lt logging le vel used by loggi ng clients when sending messages to the logging server . Use the set-log MML command to chan[...]

A-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.logPrio ( continued) • Critical —These messages indicate errors so sev ere tha t a process cannot continue operati ng. Note Do not change this v alue unless[...]

A-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.maxLocationLabels (Added in Release 9.6(1) Specif ies the maximum numbe r of location labels that can be provisioned. V a li d va lu e : 3000 Note Do not chang[...]

A-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.MMLManualBlockingCic Allo ws the Cisco PGW 2200 Softswitch to manuall y block channels that do not respond to Release, Restart, or Disconnect messages. This fea[...]

A-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.OwnClli Common language locatio n identif ier; used for circuit query v alidation when ci rcuit queries are supported. V alue: Alphanumeric strin g, up to 11 c[...]

A-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.RedirectingA T ree Used to control A- number screening/analysis via A-dig it tree. This para meter allo ws the analysis syst em to use the A-Digit tree for mapp[...]

A-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.sipFailo ver Specif ies whether the Cisco PGW 2200 Soft switch hosts, when connec ted with a session interrupt prot ocol (SIP) network, shou ld perform an auto[...]

A-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.SU A.maxOPCs Def ines the maximum number of SU A OPCs. Va l u e : 64 Note Do not change this v alue. *.SU A.maxRoutesPerOpcApcSsn Def ines the maximum number of[...]

A-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.tablesFile Location of the database d irectories. Default: ../ etc/tables.da t Note Do not change this v alue. *.tempDir Location of the tem porary f iles. Def[...]

A-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.VSCNetwo rkPlacement Determines Cisco PGW 2200 Softswitch placement (A T or IXC) and bias r outing accordingly . V alues: • Nanp_A T • Nanp_IXC • NULL •[...]

A-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format diskmonitor .CdrRmFinished Specif ies the number of days to keep f inished CDR file s. The default v alue is 0, which means that if th e Ci sc o B AMS is polling[...]

A-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format diskmonitor .DailyStartT ime Specif ies the time that the disk mo nitor is run each day to remov e files that are older than th e va lue set in diskmonitor .MaxK [...]

A-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format diskmonitor .PreserveLogs Specif ies, alon g with diskmonito r .SoftLimit, whether platform log data should be preserv ed or deleted once the disk usage pe rcent[...]

A-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format diskmonitor .Threshold Erases old log files to free di sk space. The threshold is the percent the disk is full before trimming starts. Only /v ar/log and /v ar/sp[...]

A-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.CallLimitingCo ntrol (added in Release 9.6(1) Allo ws enabling or disabling the call l imiting capability on the Cisco PG W 2200 Softswit ch. V alid value[...]

A-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format engine.CDRmessageT ypes T o specify the Call Detail Blocks (CDBs are the accounting records written at v arious points in a call) that are generated during a call[...]

A-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.RelIN APCallsAfterSw Over Defines the trea tment of IN AP calls in answer state after platform switchov e r . This para meter is used for calls that requi[...]

A-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format engine.ShortDurationCallPeriod Allo ws you to sp ecify the period used to determine a short duration call. Calls wit h a duration less than the specif ied v alue [...]

A-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.SysGSMT imerInterval Allo ws group serv ice messages (GSMs—used to advertise the state of circuits) to be sent at a p eriodic rate from the SS7 side of [...]

A-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format engine.SysMdlMemoryReduction Controls use of MDL memory reductions. Prior to Re lease 9.4(1):values: • 0 —MDL memory reductions not used (maximu m performance[...]

A-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.SysSGCPREtryT imerInterval The interv al between SGCP message tran smissions, in milliseconds. Default: 1 000 Note Do not change this v alue. engine.SysT [...]

A-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format fo verd.abswitchPort Port used for communication with the A/B switch. Va l u e : /dev/term/x Example: /dev/t erm/b Note If your confi guration does not use an A/B[...]

A-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format fo verd.conn3Addr Specifies the address o f the peer system. Example: /dev/term/b If your conf iguration does not use connection number 3, enter /dev/null (defau[...]

A-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format fo verd.ipLocalP ortB Port number used for IP c ommunication. Default: 0 Note If you ha ve tw o Cisco PGW 2200 Softswitch ho sts in a fault-tol erant config urati[...]

A-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format GWNetworkContin uity F or network continuity test on VI SM. V alid values: 1 —Network continuity is present/requested. 0 —Network continuity is present/reque[...]

A-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format ioChanMgr .sessionP auseTimer Amount of time the Cisco PGW 2200 Softswitch waits for a BSM session set to recover from f ailure before declaring the session set f[...]

A-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format logger .f ileRotateInterv al T riggers a file rota tion based on the t ime elapsed since the pre vious rotation. Default: 1 440 minutes (24 hours) Note This time[...]

A-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format MgcHeaderA ddrT ype Sets the Cisco PGW 2200 Softswitch H.248 lo cal MID address type. Va l u e s : • 1 = IP address • 2 = Domain name Default: 1 The localMID [...]

A-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format pom.dataSync Indicates that the Pro visioning Object Manager (POM) should sync hronize the provisioni ng data at startu p. V alues: • true —POM is enabled, d[...]

A-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format procM.lo gDBFile Specif ies the location of the log lev el storage. Default: ../var/pr ocMLogT able procM.minCheckHeal thInterv al Seconds at wh ich a process can[...]

A-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format RadiusAccounting.smSize The size of shared mem ory in MB. V alue: Any inte ger from 1 to 199. Default: 30 replicator .portCommChannelRecv Communication port for [...]

A-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format SIP .Conn_Idle_Period Def ines the length of ti me (in seconds) that a TCP connection can remain idle before the Cisco PGW 2200 Softswitch closes the connectio n.[...]

A-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format SIP .naptr_record_locate (Added in Release 9.8(1)) Specif ies the type of query the Cisco PGW 2200 Softswitch uses to determine the preferred transport protocol [...]

A-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format SIP .T ransportPr otocol (Obsolete in Release 9.8(1), u sed for software migrati on only) Defin es the transport protocol used to compl ete calls. The Cisco PGW 2[...]

A-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format SipT oIsupInterworkingInd Only applicable with SI P to ISUP (or ISUP to SIP) calls. When the Cisco PGW 2200 Softswitch r eceiv es a SIP message with encapsulated[...]

A-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format TCAP .avgIn v okePerDialog Sets the av erage nu mber of Inv okes for a TCAP dialog. A single dialog does not necessari ly correspond to a single In voke. The numb[...]

B-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX B Client/Server and S ecure Connectivity Relationships This appendix describes the client/server and secure connecti vity relationships used among the dif ferent applications of the Cisco PGW 2200 Softswitch, Cisco B A MS, and Cisco HSI. Cl[...]

B-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix B Client/Server and Secure Connectivity Relationships Client/Server an d Secure Connectivity Relationships Note For simplici ty , redundant p latforms are not sho wn in this fi gure. The secure connecti vity among the dif ferent application[...]

B-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix B Client/Server and Secure Connectivity Relations hips Client/Server an d Secure Connectivity Relationships Figur e B-3 Secure Connections betw een Cisco BAMS Platfor ms Secure Connectivity Between Cisco BAMS and Cisco PGW 2200 Softswitch A[...]

B-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix B Client/Server and Secure Connectivity Relationships Client/Server an d Secure Connectivity Relationships[...]

C-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX C HP OpenView Sample SNMP Configuration Configuring the Cisco PGW 2200 Softswitch to Send Alarms to HP OpenView This sample conf iguration sets up a Cisco PGW 2200 Softswitch to send alarms to HP OpenV ie w . Step 1 Load the follo w ing MIB[...]

C-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix C HP Op enView Sample SNMP Configuration Configuring the Cisco PGW 2200 Softs witch to Send Alarms to HP OpenView Step 10 Click Set . Y ou should see a dia log box indicati ng that the values are entered successfully . Step 11 Continue this[...]

C-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix C HP OpenView Sample SNMP Configuration Formatting Trap Message s Ti p Y ou can v erify the settings b y selecting each MIB OID and clicking Start Query . When you do this for snmpNotifyRo wStatus, it should sho w four entries set to acti v[...]

C-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix C HP Op enView Sample SNMP Configuration Formatting Trap Messages Follo wing is an example of an ev ent log message string: SC2200: ID#: $13 Name: $12 Set: $10 MMLname: $4 CatDesc: $11 CompDesc: $3 Severity: $8 CompID: $6 CompType: $5 CatID[...]

D-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX D Sample Installation Scripts This appendix contain s sample outputs from the follo wing: • Sample Output from instal l.sh, page D-1 • Updated Conf iguration File Sample, page D-1 1 • Sample Conf igured snmpd.cnf File, page D-1 3 • [...]

D-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Enter CiscoMGC UID [20000] Enter CiscoMGC group name [mgcgrp] Enter CiscoMGC GID [20000] [mgcgrp] group added [mgcusr] user added Modifying /etc/init.d/inetinit Installation of <[...]

D-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh Installing libACE.so Installing libbtsUtil.so Installing libcmg.so Installing libconvutil.so Installing libcxn.so Installing libda.so Installing libeng.so Installing libengif.so[...]

D-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Preparing to install TimesTen in /opt on va-redskins Executing TimesTen installation script... NOTE: Each TimesTen installation is identified by a unique instance name. The instanc[...]

D-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh Installation of <CSCOga002> was successful. Updating parameters for critagt.cnf Updating parameters for startcia.sh Updating inittab Installation of <CSCOga003> was [...]

D-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh ## BTNUP_IUP ## ## ## DPNSS_BTNR188 ## ## #################################### SS7 Protocl Family PRI Protocol Family ######################### ###################### ## 10 ## ## 2[...]

D-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh ## Q931_AUSTRALIA ## ## Q931_SINGAPORE ## ###################### Would you like to add a protocol set to your system? [y] [y,n,?,q] y SNMP Research Critical Application Subagent[...]

D-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Uncompressing dummy.so Uncompressing lcm.mdo Uncompressing lcm.so Installation of <CSCO00000> was successful. Uncompressing BTNUP_BTNR167.mdo Uncompressing BTNUP_BTNR167.so U[...]

D-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh Uncompressing Q761_AUSTRL.so Uncompressing Q761_AUSTRL_C2.mdo Uncompressing Q761_AUSTRL_C2.so Installation of <CSCO30000> was successful. Uncompressing Q761_BASE.mdo Uncom[...]

D-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Uncompressing ISUPV2_FINNISH96.so Uncompressing ISUPV2_FRENCH.mdo Uncompressing ISUPV2_FRENCH.so Uncompressing ISUPV2_GERMAN.mdo Uncompressing ISUPV2_GERMAN.so Uncompressing ISUPV[...]

D-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Upda ted Config ur ation File Sample Uncompressing Q767_BASE.so Uncompressing Q767_BRAZIL.mdo Uncompressing Q767_BRAZIL.so Uncompressing Q767_BRAZIL_C2.mdo Uncompressing Q767_BRAZIL_C2.so Uncompressing Q767_C[...]

D-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Updated Configur ation File Sample #---------------- MGC Environment Configuration Tool Usage -------------------- # REQUIRED STARTUP PARAMETERS # DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX *.platformId = 1 [...]

D-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Conf igured snmpd. cnf File # Improved SIP Failover Support. Setting 0.0.0.0 to both will disable # the SIP Improved failover support Feature. Configuring only one will # cause the switchover, if the p[...]

D-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured snmpd.cn f File # Entry format: integer snmpEnableAuthenTraps 1 # Entry type: MAX_THREADS # Entry format: integer MAX_THREADS 25 # Entry type: MAX_PDU_TIME # Entry format: integer MAX_PDU_TIM[...]

D-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Conf igured snmpd. cnf File # vacmAccessContextMatch (exact, prefix) # vacmAccessReadViewName (text) # vacmAccessWriteViewName (text) # vacmAccessNotifyViewName (text) # vacmAccessStorageType (nonVolat[...]

D-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # snmpTargetAddrTimeout (integer) # snmpTargetAddrRetryCount (integer) # snmpTargetAddrTagList (text) # snmpTargetAddrParams [...]

D-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # Copyright (c) 1997-2008 by Cisco Systems, Inc. #---------------------------------------------------------------------------[...]

D-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # are different on the two MGC hosts *.IP_NextHop1 = 0.0.0.0 *.IP_NextHop2 = 0.0.0.0 *.IP_NextHop3 = 0.0.0.0 *.IP_NextHop4 = [...]

D-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX #---------------- MGC Environment Configuration Tool Usage -------------------[...]

D-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) *.PNPopulate = disable # disable/enable *.maxLocationLabels = 3000 # 0 to 3000 *.DisableCCBSoverTunneledQSIG = 0 # 0 = Enable[...]

D-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # engine.logPrio = Debug # foverd.logPrio = Debug # M3UA.logPrio = Debug # measMgr.logPrio = Debug # MGCP.logPrio = Debug # H[...]

D-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) engine.SysMaxOverlap = 28 engine.SysGSMTimerInterval = 10000 # GSM to be sent (milliseconds) engine.LCMMdlFile = ../lib/lcm #[...]

D-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) #---------------------- cdrDmpr.openCDR = true cdrDmpr.seqFile = ../var/.cdr.seq #------------------------------------ # Alar[...]

D-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) SIP.connLocalMsgQueueSize = 1500 # Maximum number of local outgoing messsages per TCP connection queue SIP.udp2tcp_byte_xover[...]

D-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # connection 1 parameters foverd.conn1Type = socket # connection 2 parameters foverd.conn2Type = socket # connection 3 parame[...]

D-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) engine.RelINAPCallsAfterSwOver = true #---------------------------------- # Disk Monitor Parameters #------------------------[...]

D-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) H248.localMID = 0.0.0.0 # MGC Message Identifier. IP address or domain name H248.MgcHeaderAddrType = 1 # MGC H.248 Message he[...]

D-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) #---------------- MGC Environment Configuration Tool Usage -------------------- # REQUIRED STARTUP PARAMETERS # DO NOT MOVE T[...]

D-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # Set *.sipFailover = true # MIGRATED # *.sipFailover = true # MIGRATED *.stPort = 0 # MIGRATED engine.SysVirtualSwitch = 1 #[...]

D-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) M3UA.maxOPCs = 64 # Max number of M3UA OPCs M3UA.maxRoutesPerOpcDpc = 2 # Max number of M3UA routes per OPC/DPC pair SUA.maxS[...]

D-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # unix filename of the process must be used. Only the logging level of # actively or passively managed processes can be set. [...]

D-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) #------------- # Engine #------------- engine.SysPropagateChanAvail = false # MIGRATED engine.SysGeneratedCode = true engine.[...]

D-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) engine.ChargingMode = 1 # MIGRATED engine.ShortDurationCallPeriod = 0 # MIGRATED engine.ActionOnChargeTableAccessFailure = 0 [...]

D-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # measM #----------- # # Currently we assume 8000 XEMeas objects fit into 8 Mb of shared memory. # measM.sm_seg_size = 32 # s[...]

D-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) foverd.conn3Type = serial foverd.conn3Addr = /dev/null foverd.heartbeatInterval = 1000 foverd.ackTimeout = 1000 foverd.abswit[...]

D-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) diskmonitor.Limit = 7 # MIGRATED diskmonitor.Threshold = 80 # MIGRATED diskmonitor.SoftLimit = false # MIGRATED diskmonitor.C[...]

D-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # Default value: 0 Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) The follo w ing sample [...]

D-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.desiredPlatformState = master *.virtualFaultTolerant = false # avoid prov-dply/sync on FT mode in egw *.SysConnectDataAcces[...]

D-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX #---------------- MGC Environment Configuration Tool Usage -------------------[...]

D-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.maxLocationLabels = 3000 # 0 to 3000 #------------------------------------------------------------------------ # Log Server[...]

D-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # Specialized "autonomous" flags for debug, fault isolation # engine.autonomous = true # cfgM.autonomous = true Tal[...]

D-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.SelectTermCustGrpId = 0 # 1= Select Terminating SigPath CustGrpId if Originating SigPath CustGrpId is 0000. # 0= Always sel[...]

D-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # evtTimer(msec.) - Frequency at which the queue is scanned for Msgs. # hbTimer(msec.) - Heart-beat timer, Not yet implemente[...]

D-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # (verb all lowercase) MML.chg-cfg = 10000 MML.startPM = /etc/init.d/CiscoMGC start MML.stopPM = /etc/init.d/CiscoMGC stop MM[...]

D-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) replicator.portDataChannelRecv = 2970 replicator.portCommChannelSend = 2972 replicator.portCommChannelRecv = 2974 replicator.[...]

D-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) MML.rtrv-callinfo = 30000 *.AllISDNLinksFailCausesFailover = false diskmonitor.PreserveCDRs = false pom.respTimeout = 1200000[...]

E-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX E Sample Uninstall Scripts This appendix contain s sample outputs from the follo wing section, Removing a Cisco PGW 2200 Softswitch Software V ersion: Sample Output for uninstall.sh, page E-1 . Removing a Cisco PGW 2200 Softswitch Software [...]

E-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Removing /opt/CiscoMGC/etc/migrate/migrate_7.0004_7.1 Removing /opt/CiscoMGC/etc/migrate/migrate_7.0005_7.1006 Removing /opt[...]

E-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Outp ut for uninstall.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/5.0_to_6.0/properties.mod Removing /opt/CiscoMGC/etc/CONFIG_LIB/5.0_to_6.0/services.mo[...]

E-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Removing /opt/CiscoMGC/etc/CONFIG_LIB/7.1008_to_8.0/ Removing /opt/CiscoMGC/etc/CONFIG_LIB/7.1008_to_8.0/properties.mod Remo[...]

E-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Outp ut for uninstall.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/9.6001_to_9.7001/ Removing /opt/CiscoMGC/etc/CONFIG_LIB/9.6001_to_9.7001/properties.mo[...]

E-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Saving rows... 0/0 rows saved. Table successfully saved. Saving table CISCO.CBBOOKINGINFO Saving index CISCO.CBBOOKINGINFO_I[...]

E-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Outp ut for uninstall.sh Table successfully saved. Saving table CISCO.NAMEDSQL Saving index CISCO.NAMEDSQLIX1 Saving rows... 150/150 rows saved. Tabl[...]

E-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Removal of <CSCO00000> was successful. Removal of <CSCO01000> was successful. Removal of <CSCO02000> was s[...]

F-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX F Sample LAN Configurations This appendix contains sample conf igurations for two LAN switches, Cisco Catalyst 5500 A and Cisco Catalyst 55 00 B, and the route s witch modules. Sample Configuration for Cisco Catalyst 5500 A T o view the cur[...]

F-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 A set snmp trap enable config set snmp trap enable stpx set snmp trap enable syslog set snmp extendedrmon vlanmode disable set snmp extendedrmon vlanagent disable set[...]

F-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A e bridge 0x0 stp ieee set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active br idge 0x0 stp ibm set vlan 1003 name token-ring-default type tr[...]

F-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 A set logging level pruning 2 default set logging level snmp 2 default set logging level spantree 2 default set logging level sys 5 default set logging level tac 2 de[...]

F-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A set port enable 1/1-2 set port level 1/1-2 normal set port speed 1/1-2 100 set port duplex 1/1-2 full set port trap 1/1-2 disable set port name 1/1-2 set port securi[...]

F-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 A set port protocol 3/1-24 ip on set port protocol 3/1-24 ipx auto set cdp enable 3/1-24 set cdp interval 3/1-24 60 set spantree portfast 3/1-24 enable set spantree p[...]

F-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A set spantree portvlancost 4/8 cost 3018 set spantree portvlancost 4/9 cost 3099 set spantree portvlancost 4/10 cost 3099 set spantree portvlancost 4/11 cost 3018 set[...]

F-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B hostname Catalyst_5513A_RSM ! enable password cisco ! no ip domain-lookup ! ! ! interface Vlan2 ip address 209.165.200.224 255.255.255.224 no ip redirects standby 2[...]

F-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B Catalyst_5513B (enable) show config Output similar to the follo wing appears: begin ! #version 4.5(1) ! set password $1$7OtT$J/rAZe2CANYvHW72ZMtI10 set enablepass $1[...]

F-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B ! #dns set ip dns disable ! #tacacs+ set tacacs attempts 3 set tacacs directedrequest disable set tacacs timeout 5 ! #authentication set authentication login tacac[...]

F-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set spantree maxage 20 3 set spantree priority 2000 3 #vlan 4 set spantree fwddelay 4 4 set spantree hello 2 4 set spantree maxage 20 4 set spantree priority 2000 4[...]

F-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B clear timezone set summertime disable ! #set boot command set boot config-register 0x2 set boot system flash bootflash:cat5000-sup3.4-5-1.bin ! #permit list set ip[...]

F-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set port duplex 2/1-2 full set port trap 2/1-2 disable set port name 2/1-2 set port security 2/1-2 disable set port broadcast 2/1-2 100% set port membership 2/1-2 s[...]

F-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B set cdp interval 4/1-12 60 set trunk 4/1 auto isl 1-1005 set trunk 4/2 auto isl 1-1005 set trunk 4/3 auto isl 1-1005 set trunk 4/4 auto isl 1-1005 set trunk 4/5 au[...]

F-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set spantree portcost 12/1 3005 set spantree portpri 12/1 15 set spantree portvlanpri 12/1 160 set spantree portvlancost 12/1 cost 3004 4-8,11-15 ! #module 13 empty[...]

F-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B standby 4 preempt standby 4 authentication VSC3000 standby 4 ip 209.165.200.224 ! router eigrp 1 network 209.165.200.224 ! ip classless ! snmp-server community pub[...]