Cisco Carrier Routing System Cisco CRS-1 инструкция обслуживания

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide July 20 1 1 Text Part Number: OL -10971-10[...]

THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FULL RESPO NSIBILITY FOR THEIR APPLICATION OF ANY PRO[...]

iii Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 CONTENTS Preface vii Objective vii Audience vii Document Organization vii Document Conventions viii Related Documentation ix Changes to This Document x Obtaining Documentation and Submitting a Serv ice Request xi CHAPTER 1 Overview 1-1 Chassis Overview 1-1 [...]

Contents iv Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Removing a DC Power Shelf 2-20 Installing an AC Power Shelf 2-24 Removing an AC Power Shelf 2-26 Installing a Power Supply 2-28 Removing a Power Supply 2-30 CHAPTER 3 Installing and Removing Ai r Circulation Components 3-1 About Line Card Chassis Ai[...]

Contents v Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Installing an RP or PRP Card 4-26 Removing an RP or PRP Card 4-29 Verifying the Installation of an RP or PRP Card 4-30 How to Install or Remove an MS C, FP, or LSP 4-32 Installing an MSC, FP, or LSP 4-33 Removing an MSC, F P, or LSP 4-37 Verifying th[...]

Contents vi Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10[...]

vii Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Preface This preface explains the objecti ves, in tended au dience, and or ganization of Cisco CRS Carrier Routing System 4-Slot Line Car d Chassis Installation Guide and describes the con ventions that con vey instruction s and other information. The prefa[...]

viii Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Preface • Chapter 1, “Overvie w , ” pro vides an introdu ction to the v a rious line card chassis systems and components. This chapter also provides the reco mmended sequence of tasks fo r installing all the major components of the Cisco CRS 4-slot l[...]

ix Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Preface T imesaver Means the described action saves t ime . Y ou can save time by performin g the action described in th e paragraph. Caution Means rea d e r b e c a re f ul . Y ou are capable of doing something that might resu lt in equipment damage or loss[...]

x Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Preface Changes to This Document T able 1-1 lists the technical ch anges made to this document since it w as first prin ted. T able 1 - 1 Changes to This Document Revision Date Change Summary OL-10971-10 July 2011 Added informat ion about ne w CRS-LSP Label S[...]

xi Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Preface Obtaining Documentation and Submitting a Service Request For info rmation on obtaining documentation, sub mitting a service request, and gatheri ng additional information, see the mont hly What’ s New in Cisco Pr oduct Documentation , which also li[...]

xii Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Preface[...]

CH A P T E R 1-1 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 1 Overview This chapter intro duces the Cisco CRS Carrier Routing System 4-Sl ot Line Card Chassis at the highest le vel. It cont ains illustrations of the front and b ack of the chassis, complete wi th callouts to each hardware co mponent. Fo[...]

1-2 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overvi ew Chassis Components Chassis Components This section lists th e main components of a Cisco CRS 4-slot line card chassis. It primarily identif ies the components that are considered fiel d-replaceable units (FR Us), but wher e additional de[...]

1-3 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overview Chassis Components Figur e 1 -2 Rear (SFC) View of the Ci sco CR S 4-Slot Line Car d Chassis The Cisco CRS 4-s lot line card ch assi s contains the following components: • As many as four MSCs, FPs, or LSPs and four PL IMs. The line ca[...]

1-4 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overvi ew Chassis Components • A chassis midplane that connects line cards to th eir associated PLIMs. T h e midplane design allow s a line card to be remo ved from the chassis wit hout hav ing to disconnect the cables that are at tached to the [...]

1-5 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overview Chassis Slot Numbers Chassis Slot Numbers This section identif ies the location and slot nu mbers for major cards and modules (primaril y the field- replaceable units) that pl ug into th e Cisco CRS 4-slot line card chassis. Figure 1-3 s[...]

1-6 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overvi ew Chassis Slot Numbers Figur e 1 -4 Cisco CRS 4-Slot Chassi s Slot Number ing—Rear (SFC) Side As s h own i n Figure 1-4 , the slot numbers on the SFC side of the chassis include: • Fan t ra y • Card cage, including four r educed-heig[...]

1-7 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overview Chassis Cable Managemen t Chassis Cable Management The Cisco CRS 4-slot line card chassis has cable mana gement features f or the front (PLIM) side o f the chassis, just abov e the card cage. The horizontal cable management trays ha ve a[...]

1-8 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overvi ew Chassis Power System Figure 1 -6 Airflow Through the Cisco CRS 4-Slot Line Card Chassis The Cisco CRS 4-slot line card chassis airflow v olumes are as follows: • Chassis airflow: Up to 880 cubic feet (24,919 liters) per minute • Po w[...]

1-9 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overview Preventing Electrostatic Discharge Note Revie w the safe ty warnings listed in Re gulatory Compliance and Safety Inf ormation that are applicable to your router be fore installing, conf iguring, or troubleshooting an y installed card. ?[...]

1-10 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overvi ew Recommended Chassis Installation Task Sequence Recommended Chassis Installation Task Sequence This section provides the recommended task sequenc e for installing a ne w Cisco CRS 4-slot line card chassis. Step 1 If your system was ship [...]

1-11 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overview CRS Hardware Compatibility T able 1 -1 CRS Compati bility Matr ix Switch Fabric RP/DRP MSC/FP/LSP PLIMS Note CRS-4-FC/S (40G) RP-A (CRS-4-RP), DRP-B (CRS-DRP-B) CRS-MSC-B 1OC768-DPSK/C 1OC768-ITU/C 1OC768-POS-SR 4-10GE-ITU/C 8-10GBE CRS[...]

1-12 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 1 Overvi ew CRS Hardware Compatibility[...]

CH A P T E R 2-1 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 2 Installing and Removing Power Components This chapter pro vides instructions on ho w to install and remo ve the Cisco CRS Car rier Routing System 4-Slot Line Card Chassis po wer components. This chapter p resents the foll o wing topi cs: •[...]

2-2 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components About Installing and Re moving the Power Components Caution A Cisco router must b e operated with all its po wer modules installed at all times for el ectromagnetic compatibility ( EMC). The Cisco CRS 4-sl[...]

2-3 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components About Installing and Removing the Power Comp onents Figur e 2-1 NEBS Bonding and Gr ounding P oints (Rear of Chassis) If you plan to connect the Cisco CRS 4-slot line card chassis system to a ne twork equ[...]

2-4 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components About Installing and Re moving the Power Components Note The DC return of this system shoul d remain isolated from the syst em frame an d chassis (DC-I: Isolated DC Return). AC Power Supply Cord Illustrati[...]

2-5 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components About Installing and Removing the Power Comp onents Figur e 2-3 CAB-CRS4AC-EU Figur e 2-4 CAB-CRS4AC-IT Figur e 2-5 CAB-CRS4AC-UK Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113360 Connector [...]

2-6 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components About Installing and Re moving the Power Components Figur e 2-6 CAB-CRS4AC-US and Japan Powering the Chassis Up or Down The chassis does not hav e a single enable switch that powers the en tire chassis and[...]

2-7 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components DC Power Systems on t he Cisco CRS 4-Slot Router Figure 2-7 AC P ower Enable S witches For an illustration of the DC po wer enable switches, see Figure 2-19 . Note All power cords must be u nplugged from [...]

2-8 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components DC Power Systems on the Cisco CRS 4-Slot Router Figur e 2-8 DC Po wer Shelf: DC P ower Inpu t Shelf and DC P ow er Input Module (PIM) When installing the DC power shelf, these two compon e nts are mated to[...]

2-9 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components DC Power Systems on t he Cisco CRS 4-Slot Router DC Power Shelf Guidelines At sites where the Cisco CRS 4-slot line card chassis is equipped with a DC power input shelf and po wer supplies, observ e the f[...]

2-10 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components DC Power Systems on the Cisco CRS 4-Slot Router Note When wiring the DC po wer shelf, be sure to attach the ground wire f irst. When remo ving the wiring, be sure to remov e the ground wire last. The grou[...]

2-11 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components DC Power Systems on t he Cisco CRS 4-Slot Router Input-Power-Present LEDs The DC pow er Input-Po wer-Presen t LEDs provide a visual indicati on to service personnel that there is voltage present across t[...]

2-12 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components DC Power Systems on the Cisco CRS 4-Slot Router Note T able 2-3 and T able 2-4 are for reference; we recommend using at least 50 A of DC current and 6-gauge wire. T able 2-3 Wire Gaug e for Cur r ent Lo a[...]

2-13 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components DC Power Systems on t he Cisco CRS 4-Slot Router T able 2-4 pro vides th e correlation bet ween wire gauge a n d the resistance (in Ohms for each 1000 feet of wire) for copper wire. T able 2-4 Resistance[...]

2-14 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Installing a DC Power Shelf Installing a DC Power Shelf This section descri bes how to install a DC po wer shelf in the C isco CRS 4- slot line card chassis. The DC po wer shelf encloses four po wer suppl[...]

2-15 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Installing a DC Power Shelf Note This procedure assumes that the Cisc o CRS 4-slot line car d chassis is already mounted in a rack with suf ficient room to access the side s and the bottom of the chassis[...]

2-16 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Installing a DC Power Shelf Installing the DC Power Input Module Step 5 From the rear of the chassis, inser t the DC po we r input module (PIM) into t he open po wer bay (see Figure 2-13 ). Note The PIM w[...]

2-17 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Installing a DC Power Shelf Figure 2-14 Inserting th e DC P ower Input Shelf Securing the PIM to the DC Power Input Shelf Step 8 Go to the rear of the chassis. T o mate the PIM to the DC po wer input she[...]

2-18 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Installing a DC Power Shelf Note When wiring the power shelf, be sure to attach the ground wire f irst. When removin g the wiring, be sure to remo ve the ground wire last. The grou nd wire must be atta ch[...]

2-19 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Installing a DC Power Shelf Note The wiring block co vers can be orient ed to route the wire cabling from the top or the bo ttom of th e c over s. Installing the DC Power Supplies Step 13 Go to the front[...]

2-20 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Removing a DC Power Shelf Figur e 2-18 Chassis Air Filter Step 15 Install the inlet grille. S ee the “Installing the Inlet Gr ille” section on page 5-1 . Removing a DC Power Shelf This section descri [...]

2-21 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Removing a DC Po wer Shelf Prerequisites Po wer do wn the Cisco CRS 4-slot line card chassis (as described in the steps below). Required Tools and Equipment Y ou need the follow ing tools and parts to pe[...]

2-22 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Removing a DC Power Shelf Figure 2-19 DC P ower Shelf Enable S witches Step 3 Remov e both wiring block co vers (see Figure 2-20 ). a. Use a number 1 Phillips screwdri ver to loosen the capture screw . b.[...]

2-23 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Removing a DC Po wer Shelf Figur e 2-20 Removing Wir ing Block Co vers and DC Input P ow e r Cables Step 6 W ith a 5-mm Allen wrench, loosen the po wer shelf coupling scre w (see item 1 in Figure 2-20 ).[...]

2-24 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Installing an AC Power Shelf Figur e 2-21 Removing th e DC P ower Input Shelf Remove the DC Power Input Module (PIM) Step 10 Go to the rear of the chassis. Re mov e the DC power input modul e (PIM). a. W [...]

2-25 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Installing an AC Power Shelf The A C-powered chassis contains a single A C power shelf containing four A C power supplies. Each A C po wer supply con verts input A C po wer to the –54 VDC used by the C[...]

2-26 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Removing an AC Powe r Shelf Steps T o install an A C po wer shelf, use Figure 2-23 as a reference and follow these steps: Step 1 Attach the ESD-pre venti ve wrist strap t o your wrist and con nect its lea[...]

2-27 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Removing an AC Power Shelf Caution Prior to removing the A C power shelf, to reduce th e risk of damage, ensure that the rear panel fasteners are disengaged, the input power cables are disconnect ed, and[...]

2-28 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Installing a Power Supply What to Do Next After performing this task, you may install a replacement po wer shelf (see the “I nstalling an A C Power Shelf” section on page 2-24 ), install the p ower su[...]

2-29 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Installing a Power Supply Steps T o install a po wer supply , follo w these steps: Step 1 Attach the ESD-pre venti ve wrist strap t o your wrist and con nect its leash to one of t he ESD connection socke[...]

2-30 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Removing a Power Supply Caution T o prev ent damage to the A C or DC po wer shelf-to-po w er supply connections, d o not use excessi ve force when seating a power supply to its po wer shelf. What to Do Ne[...]

2-31 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing and Removing Po wer Components Removing a Power Supply Step 2 T o unseat the po wer supply from the power shel f connector , unlatch the po wer supply door grille latch and open it completely . See Figure 2-25 for an illustrati on of [...]

2-32 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 2 Installing a nd Removing Power Components Removing a Power Supply[...]

CH A P T E R 3-1 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 3 Installing and Removing Air Circulation Components This chapter pro vides instructions on ho w to install and replace th e Cisco CRS Carrier Routing System 4-Slot Line Card Chass is air circulation componen ts. This chapter pr esents the fol[...]

3-2 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components About Line Card Chassis Airflow Figur e 3-1 Airflow Thr ough the Cisco CRS 4-Slot Line Car d Chassis A replaceable air filter is located in side the chassis below the PLIM car d cage at an angle.[...]

3-3 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Installing and Re moving Air Circulation Components How to Install or Remove Air Circulation Comp onents Figure 3-2 System Air Filt er s Note W e recommend that you check the air filters once a mo nth. Replace a f ilter when you notice a signific[...]

3-4 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components How to Install or Remo ve Air Circulation Co mponents Installing a Fan Tray This section describes ho w to install a fan tray i n th e Cisco CRS 4-slot line car d chassis. For information on the [...]

3-5 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Installing and Re moving Air Circulation Components How to Install or Remove Air Circulation Comp onents Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve wrist strap • Large flat -b[...]

3-6 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components How to Install or Remo ve Air Circulation Co mponents Caution The chassis auto matically po wers do wn if the fan tray is unseated from its connector for more than one minute. If you plan on hot [...]

3-7 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Installing and Re moving Air Circulation Components How to Install or Remove Air Circulation Comp onents Required Tools and Equipment Y ou need the follo wing tools to perform this task: • ESD-pre venti ve wrist strap • Large flat -blade scre[...]

3-8 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components How to Install or Remo ve Air Circulation Co mponents Figur e 3-5 Chassis Air Filt er Prerequisites Before performing this task, you must f irst remove any chassis front cosmetic cov ers, the low[...]

3-9 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Installing and Re moving Air Circulation Components How to Install or Remove Air Circulation Comp onents Step 3 Replace the lower chassis grille: a. Position the grille in front of the air intak e slot on the lo wer front side of the chassi s and[...]

3-10 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components How to Install or Remo ve Air Circulation Co mponents Prerequisites Before performing t his task, you must f irst remove t he lower chassis grille and po we r tray air fi lter cover (see the “[...]

3-11 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Installing and Re moving Air Circulation Components How to Install or Remove Air Circulation Comp onents Figure 3-7 Po wer T ra y Air Filter Prerequisites No prerequ isites exist for th is task. Caution Nev er operate the line card chas sis with[...]

3-12 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components How to Install or Remo ve Air Circulation Co mponents Step 4 Reinstall the lower chassis grille: a. Position the grille i n front of the air intak e slot on the lo wer front side of the chassi s[...]

3-13 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Installing and Re moving Air Circulation Components How to Install or Remove Air Circulation Comp onents Required Tools and Equipment Y ou need the follo wing tools to perform this task: • ESD-pre venti ve wrist strap • Medium flat-blade scr[...]

3-14 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 3 Insta lling and Removing Air Circulation Components How to Install or Remo ve Air Circulation Co mponents[...]

CH A P T E R 4-1 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components This chapter pro vides instructions on ho w to install and remo ve the Cisco CRS Car rier Routing System 4-Slot Line Card Chass is switch fabric cards (SFCs[...]

4-2 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components About Installing and Removing Ca rds and Associated Components Guidelines for Card Installation and Removal This section contains the gen eral guidelines for ca[...]

4-3 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components About Installing and Removing Cards and Associated Components Figur e 4-2 Operating Ejector Lev ers Recommended Order for Installing Cards Although it is not cri[...]

4-4 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components About Installing and Removing Ca rds and Associated Components Note See the instructions in this chap ter for details on ho w to install the indivi dual cards. [...]

4-5 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Remove or Insta ll an Impedance Carrier Cable Management Brackets The Cisco CRS 4-slot line card cha ssis includes a cable ma nagement sy stem that organi[...]

4-6 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Remove or Install a n Impedance Carrier Figure 4-4 Switch F abr ic Slot Impedance Carr ier 158394[...]

4-7 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Remove or Insta ll an Impedance Carrier Figure 4-5 RP Slot Impedance Carr ier 122146[...]

4-8 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Remove or Install a n Impedance Carrier Figur e 4-6 PLIM Slot Impedance Car r ier 138972[...]

4-9 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Remove or Insta ll an Impedance Carrier Figur e 4-7 MSC Slot Impedance Car r ier For more information, see the “Removing an Imped ance Carrier” sectio[...]

4-10 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Remove or Install a n Impedance Carrier Removing an Impedance Carrier This sect ion describe s ho w to remo ve a n impedance ca rrier from the Cisco CRS[...]

4-11 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Remove or In stall a Card Slide-Assistance Arm (Handle ) Prerequisites Before performing this task, open the doors if they ar e installed and ensure that[...]

4-12 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Remove or Install a Card Slide-Assistance Arm (Hand le) Figur e 4-8 Modular Services Card (CRS-M SC) with Slide- Assistance Ar m Attac hed Removing a Ca[...]

4-13 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Remove or In stall a Card Slide-Assistance Arm (Handle ) Prerequisites No prerequ isites exist for th is task. Caution Do not lift car ds by the slide-as[...]

4-14 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Pillow Block Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve wrist s[...]

4-15 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Pillow Block Installing a Pillow Block This section describes ho w to install a replacement pillo w block on the chassis after remo v[...]

4-16 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Pillow Block Figure 4-9 Installing a Pil low Bloc k Step 6 Install the lo wer right scre w (see item 2 in Figure 4-9 ). Step 7 Insta[...]

4-17 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Pillow Block The follo wing items are included in the CRS-4-PI LLBLK= pillo w block replacement kit: • 2 replacement pillo w blocks[...]

4-18 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remo ve a Switch Fa bric Card How to Install or Remove a Switch Fabric Card This section contains the following procedures: • Switch Fabri [...]

4-19 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Switch Fabr ic Card Figure 4-12 Switc h F abric Car d (QQ123-140G) Prerequisites Before performing this task, remov e the switch fabr[...]

4-20 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remo ve a Switch Fa bric Card Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve[...]

4-21 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Switch Fabr ic Card Step 1 Go to the rear of the chassis. Attach the ESD-prev en tiv e wrist st rap to you r wrist and connect its le[...]

4-22 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remo ve a Switch Fa bric Card What to Do Next After performing this task: • Place the impedance carrier in an antis tatic bag for storage a[...]

4-23 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Switch Fabr ic Card Figur e 4-14 Removing a S wit c h F abr ic Card Verifying the Installation of a Switch Fabric Card This section d[...]

4-24 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Route Processor Card Understanding the LEDs Alphanumeric LEDs At one end of the faceplate, near an ejector le ver , a switch fa bric[...]

4-25 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Rou te Processor Card Location and Slot Numbers for the RPs, MSCs, FPs, LSPs, and PLIMs The route processors, MSCs, FPs, LSPs, and PL[...]

4-26 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Route Processor Card Installing an RP or PRP Card This section describes ho w to install a route proce ssor (RP) or performance rout[...]

4-27 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Rou te Processor Card Figur e 4-1 7 Rout e Pr ocessor (RP) Card Prerequisites There are no prerequisites for this task. 122144[...]

4-28 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Route Processor Card Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve[...]

4-29 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Rou te Processor Card Step 10 T o fully seat the card in the midplane connect or , grasp both card ejector le vers simu ltaneously , [...]

4-30 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Route Processor Card Required Tools and Equipment Y ou need the follo wing tools to perform this task: • ESD-pre venti ve wrist st[...]

4-31 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Rou te Processor Card Figure 4-18 shows the RP card front panel. Figur e 4-18 RP Car d Fr ont P anel Figure 4-19 shows the PRP card f[...]

4-32 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove an MSC, FP, or LSP Understanding the LEDs Alphanumeric LEDs At one end of the faceplate, near an ejector lev er, an RP or PRP car d ha[...]

4-33 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove an MSC, FP, or LSP Installing an MSC, FP, or LSP This section describes ho w to install an MSC, FP , or LSP line card in the Cisco CRS [...]

4-34 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove an MSC, FP, or LSP Figur e 4-20 Modular Serv ices Card (CRS-MSC-140G) Prerequisites Caution Do not carry a line card by th e slide-ass[...]

4-35 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove an MSC, FP, or LSP Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve stra[...]

4-36 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove an MSC, FP, or LSP Step 7 Grasp the face plate of the card with one hand and place your other hand under the card to su pport and guid[...]

4-37 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove an MSC, FP, or LSP Step 10 Carefully slide the line car d into the slot until the ejector le vers meet the edge s of the card cage, the[...]

4-38 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove an MSC, FP, or LSP Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve str[...]

4-39 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove an MSC, FP, or LSP Figur e 4-22 Removing an MSC, FP , or LSP Card Step 6 Place the remo ved line card on an antistatic mat, or immediat[...]

4-40 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove an MSC, FP, or LSP Verifying the Installation of an MSC, FP, or LSP This section describes ho w to verify that a line card has been pr[...]

4-41 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove an MSC, FP, or LSP Figure 4-26 show s the CRS-FP140 front panel. Figure 4-26 CRS-FP140 Fr ont Panel Figure 4-27 shows the CRS-LSP front[...]

4-42 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Physical Layer Interface Mo dule Troubleshooting the MSC, FP, or LSP If the installed or replaced line card f ails to operate or to [...]

4-43 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Physical Layer Interface Module Caution MSC-140G and FP-140 li ne cards should only be paired wi th 20-port and 14-port 1 0-GE XFP PL[...]

4-44 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Physical Layer Interface Mo dule Figure 4-28 T ypical Ph ysical Lay er Interf ac e Module (PLIM) - 14-P ort 1 0-GE XFP PLIM Y o u ca[...]

4-45 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Physical Layer Interface Module Prerequisites Before performing this task, remo ve the i mpedance carrier . Required Tools and Equipm[...]

4-46 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Physical Layer Interface Mo dule Figur e 4-29 Installing a PLIM Step 7 Orient the PLIM so that the status display is on top , then p[...]

4-47 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Physical Layer Interface Module Step 9 Carefully slide the PLIM into the sl ot until the ejector le vers meet the edges of the card c[...]

4-48 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Physical Layer Interface Mo dule War ni ng Class 1 Laser Product. Statement 113 War ni ng Class 1 LED product. Statement 126 War ni [...]

4-49 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Physical Layer Interface Module Figur e 4-30 Removing a PLIM Step 1 Attach the ESD-pre venti ve wrist strap t o your wrist and con ne[...]

4-50 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Physical Layer Interface Mo dule Step 6 Move one hand under the PLIM to gu ide it. A void touchi ng the PLIM printed ci rcuit board,[...]

4-51 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a PCMCIA Card • Make sure that the P LIM is seat ed firmly in the Cisco CRS 4-slot line card chassis slot. One easy way to v erify ph[...]

4-52 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a PCMCIA Card Required Tools and Equipment Y ou need the follow ing tools and part to perform this task: • ESD-pre venti ve strap ?[...]

4-53 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Small Form-Factor Pluggable (SFP) Module Steps T o remove the PCMCIA card, follo w these steps: Step 1 Attach the ESD-pre venti ve wr[...]

4-54 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Small Form-Factor Pl uggable (SFP) Modu le Installing a Bale-Clasp SFP Module This section describes ho w to inst all a bale-clasp S[...]

4-55 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Small Form-Factor Pluggable (SFP) Module Figur e 4-34 Installing a Bale-Clasp SFP Module int o a Por t Removing a Bale-Clasp SFP Modu[...]

4-56 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Small Form-Factor Pl uggable (SFP) Modu le Steps T o remove a bale-clasp SFP module from a PLIM, follo w these steps: Step 1 Attach [...]

4-57 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing and Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, and Associated Components How to Install or Remove a Small Form-Factor Pluggable (SFP) Module Figur e 4-35 Removing a Bale-Clasp SFP Module Step 5 Place the remove d module on an antista[...]

4-58 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 4 Installing an d Removing SFCs, RPs, MSCs, FPs, LSPs, PLIMs, an d Associated Components How to Install or Remove a Small Form-Factor Pl uggable (SFP) Modu le[...]

CH A P T E R 5-1 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 5 Installing and Removing the Doors and Grille This chapter pro vides instructions on ho w to install and remo ve the fron t doors and inlet grille o n the Cisco CRS Carrier Routing System 4-Slot Line Card Chassis. This chapter pr esents the f[...]

5-2 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing an d Removing the Doors and Grille Installing the Inlet Grille Figure 5-1 sho ws the inlet grille. Figur e 5-1 Inlet Grille Prerequisites There are no prerequisites for installing the inlet grille. Required Tools and Equipment Y ou need[...]

5-3 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing a nd Removing the Doors and Grille Removing the Inlet Grille Figur e 5-2 Aligning the Inlet Gr ille What to Do Next Y o u can now install the doors (see the “Installing the Doo rs” section on page 5-4 ). Removing the Inlet Grille T[...]

5-4 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing an d Removing the Doors and Grille Installing the Doors Steps T o remove the inlet gr ille, follow these steps: Step 1 Attach the ESD-pre ventiv e wrist strap to your wri st and connect its leash to an ESD connection socket on the front[...]

5-5 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing a nd Removing the Doors and Grille Installing the Doors Figure 5-3 Setting the Door Into the Lo wer Door Mounting Brack et Step 5 No w secure the upper portion of the doo r . Keep ing the door stead y with one hand, align the door groo[...]

5-6 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing an d Removing the Doors and Grille Installing the Doors Step 7 K eeping the knob latch at a shallo w angle, align the securing pin and guide pin wi th the upper door mounting bracket. Note Y ou must alig n both the knob latch and the gu[...]

5-7 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing a nd Removing the Doors and Grille Opening the Doo rs Figure 5-6 Clo sing the Door Opening the Doors T o open the doors on the Cisco CRS 4-slot line card chassis, follo w thes e steps: Step 1 Lift the latch b utton at the base of the d[...]

5-8 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Chapter 5 Installing an d Removing the Doors and Grille Removing the Door s Removing the Doors T o remove the doors from the Cisco CRS 4-slot li ne card chassis, follo w these steps: Step 1 Open the door you w ant to remove. Step 2 While supporting the do o[...]

A-1 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 APPENDIX A Cisco CRS 4-Slot Line Card Chassis System Specifications This appendix provides the specif i cations for th e Cisco CRS Carrier Rou ting System 4-Slot Line Card Chassis. It contains the follo wing sections: • Compliance and Safety Reference, pa[...]

A-2 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Appendix A Cisco CRS 4-Slot Li ne Card Chassis System Specifications Cisco CRS 4-Slot Line C a rd Chassis Specifications Chassis with all compon ents installed ( without ex terior cosmetic components and packaging) 361 lb (163.7 kg) Cards and Modules Su ppo[...]

A-3 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Appendix A Cisco CRS 4-Slot Li ne Card Chassis System Specifications Environmen tal Specificat ions Environmental Specifications Ta b l e A - 2 lists the environmental specif ications for the Cisco CRS 4-slot line card chassis. Chassis airflo w Up to 880 cu[...]

A-4 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 Appendix A Cisco CRS 4-Slot Li ne Card Chassis System Specifications Environmental Specifications[...]

IN-1 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 INDEX A acoustic noise specification, system A-3 AC power cord illustrations 2-4 AC power shelf converting to DC power 2-14 enable switches (figure) 2-7 figure 2-25 installing 2-24 removing 2-26 weight of 2-27 air circulation components installing 3-1 remo[...]

Index IN-2 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Instal lation Guide OL-10971-10 FP (forward processor card ) 4-1 LSP (label switch processor card) 4-1 MSC (modular services card) 4-1 components, CRS routing sy stem 1-2 cooling system, chassis 1-7, 3-1 CRS routing system air filter 1-7 airflow and exhaust 1-8 chassis installati[...]

Index IN-3 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 enable switches AC power shelf 2-7 DC power shelf 2-22 F fabric card (figure) 4-19 installing 4-18 removing 4-22 fan tray figure 3-4, 3-6 hot swapping caution 3-6 installatio n steps 3-5 installing 3-4 removing 3-5, 3-7 Figures AC power enable switch[...]

Index IN-4 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Instal lation Guide OL-10971-10 (figure) 2-3 ground wire 2-10 guidelin es 2-2 H handle, card 4-11 humidity guidelines, system A-3 I impedance carrier MSC (figure) 4-9 PLIM (figure) 4-8 RP (figure) 4-7 switch fabric (figure) 4-6 input-power-presen t LEDs 2-11 installing AC power s[...]

Index IN-5 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 installing 4-1, 4-33 installing (figure) 4-36 LEDs 4-41 and PLIMs 1-3 removing 4-1, 4-37 removing (figure) 4-39 troubleshooting 4-42 verifying instal lation 4-40 MSC-side slot numbers 1-6 N NEBS bonding (figur e) 2-3 grounding (f igure) 2-3 Telcordia[...]

Index IN-6 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Instal lation Guide OL-10971-10 pillow bloc k 4-16 PLIM 4-42, 4-48 power supply 2-30 power tray air filter 3-12 RP card 4-24, 4-29 SFP modules 4-53 switch fabric card 4-22 wiring block co vers 2-22 requirements airflow exhaust 1-8, 3-3 DC input power connect ions 2-8 routing syst[...]

Index IN-7 Cisco CRS Carrier Routing System 4-Slot Line Card Chassis Installation Guide OL-10971-10 troubleshooting MSC 4-42 PLIM 4-50 RP card installation 4-32 switch fabric card 4-24 V verifying MSC installation 4-40 PLIM 4-50 RP card 4-30 switch fabric card installati on 4-23 W warnings PLIM installation 4-47 wire characteristics, DC power 2-11 [...]

Index IN-8 Cisco CRS Carrier Routing S ystem 4-Slot Line Card Chassis Instal lation Guide OL-10971-10[...]