Clover Electronics LCD0935 инструкция обслуживания

INSTRUCTION MANUAL 9.2” TFT LCD COLOR MONITORING SYSTEM With 2 Indoor/Outdoor Color Cameras MODEL: LCD0935 Ver. 061109, 011510 Copyright © 2009 Wisecomm. All Rights Reserved.[...]

▪ To prevent fire or shock hazard, do not e xpose the m onitor to rain or moisture. ▪ To avoid electrical shock, do not open the case of this product. ▪ Operate this product using only the supplied power supply . ▪ Do not overload electrical outlets or extension cords, this can result in f ire or electric shock. ▪ Keep this product away f[...]

1. This light is lit in blue when the AC power supply is properly plugged to DC jack (refer to #9). 2 -Select the CH1 camera by pressing this button in the manual mode or autom atic sequential mode. -Press Down ( ▼ ) button to navigate the submenu. 3. -Select the CH2 camera by pressing this button in the manual mode or autom atic sequential mode.[...]

12. Audio input (RCA jack) Audio input port for VCR playing 13. Audio output (RCA jack) Audio output port for recording. 14. Video input (BNC) Video input port for VCR playing 15. Video output (BNC) Video output port for recording. 3.2 CAMERA 1. Lens 3.6mm fixed Lens. 2. Infrared LEDs 30 Infrared LEDs let you s ee objects in the darkness. 3. CDS se[...]

4.1 Installation of Mounting Bracket for TFT LCD Monitor 1. Turn the tightening knob ① counter-clockwise to disassemble the swivel. 2. Place the fixed ring ② into the swivel as shown ill ustration above and turn the tightening knob ① clockwise to secure the swivel. Pay attention not to miss the spring ③ . 3. Loosen the locking knob and set [...]

4. Place the square m etal ④ on the top of the mounting br acket into the metal hole ⑤ on the rear of the monitor as shown illu stration above, then secure th e monitor using the locking ring ⑥ . 5. Turn the tightening knob ① clockwise to secure the swiv el after setting the desired angle of monitor to display. It can be used for wall-mount[...]

1. Attach the moun ting bracket base ① to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the bracket base using the supplied screws. 2. Lock the mounting bracket with the locking ring ② . 3. Turn the pivot locking screw ③ with the provided hex-head wrench counter- clockwise to set [...]

- All the menus will autom atically disapp ear if you don’t change values within 10 seconds. - The remote controller may not control al l the functions on the system . In case of this, please use the butto ns on the front panel. 6.1 Video Enhancement ( ) - Press the MENU button on the fr ont panel to setup the menus. - Select the VIDEO INHANCEMEN[...]

- Choose one among 15, 30, 45 and 60 to turn the power off automatically after the selected time in minute. Sharp: - Adjust the sharpness of images. Panel-LR: - You can view the mirror images or norm al images by selecting. Panel-UD: - You can view the reverse images or norm al images by selecting. AUTO-SWITCH - Select the dwell time f or the autom[...]

Minimum illumination 0 Lux (LED on), 0.1 Lux @F1.2 (LED off) IR LED 30pcs, Wave Length: 850nm S/N ratio More than 48db (AGC off) Gamma characteristics 0.45 Video output 1.0Vp-p Composite @75 ohms Microphone Waterproof C-Mic Exposure Time Range 1/60s ~ 20µs Lens 3.6mm fixed lens Current consumption 400 mA Max @LED on Power supply DC 12V (Re gulated[...]

▪ Please pack the system carefully and securely using the original pa cking m aterials, and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703 . ▪ Please include a check for $20.00 to cover the cost of return posta ge and handling. If the system is returned w ithin the warranty period, please include a proof of purchase. If t[...]