CompuSTAR P1WAMR инструкция обслуживания

1 WWW.COMPUSTAR.COM This device complies w ith Part 15 of the FCC rules. Operation is subject to the following conditions; (1) This device may not cause harmful interference. (2) This device may accept any interference received, including interference tha t ma y cause undesired operation. CAUT ION: Changes or modifications not expre ssly approved b[...]

T able Of Content s Kit(s) Contents ............................................................................................................................... ........... 3 Warranty Coverage ............................................................................................................................... .... 3 Remote Reference ..[...]

Introduction Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual. Please note that this manual applies to all PRO 1-Way Remote systems, regardless of whether you purchased the alarm only, starter only or alarm/star[...]

Remote Reference Remote Reference P1WAMR (1 Way AM) Applicable to the following models; - P1WAM-AS (alarm and remote start) - P1WAM-A (alarm w/out remote start) - P1WAM-S (remote start w/out alarm) P1WAMR - US Only P1WSHR (1 Way Super Heterodyne) Applicable to the following models; - P1WSH-AS (alarm and remote start) - P1WSH-A (alarm w/out remote s[...]

Quick Reference Quick Reference Valet Mode Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will st i ll lock and unlock power lock systems. The parking ligh[...]

1 Way Remote Button Functions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no Panic/vehicle loca ter (flashes vehicles parking lights and sounds siren and horn). 0.5 seconds no Unlock/Disarm 0.5 seconds no Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or win[...]

General System Functions General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons. Although CompuStar PRO remotes have numerous button functions a[...]

IMPORTANT: Your vehicle’s key must be inserted into the ignition and turned to the “on” position prior to driving your vehicle. If the foot brake is depressed prior to t he key being in the “on” position, the vehicle will shut off. Manual Transmission Remote Start Function (Reservation Mode) In order to remote start a manual transmission [...]

Trunk Release Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicle’s parking lights will flash once and/or siren chirp once indicating th at the trunk release command has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature that may require additional parts and labor. Auxili[...]

Advanced System Functions Advanced System Functions The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local authorized CompuStar dealer to be active. The following section reviews advanced system functions. Many of these functions require multiple steps or addit[...]

STEP 1: Turn on Option 3-10-III. (Dealer programmed option) TEP 2: Turn ignition key to the “on” position. TEP 3: Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash TEP 4: Enter the first digit of the desired two digit pass code by depressing the switch the number of s, TEP 5: The LED will confirm the fi[...]

Remote Coding / Programming Routine(s) Remote Coding / Programming Routine(s) IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time. IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any operations. All remotes must be code[...]

Remote S tart Error Dia gnostic gnostic If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. Following those three flashes the parking lights will flash again correspo nding to the error table. If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. F[...]

Limited Lifetime W arranty Firstech, LLC Warrants to the original purchaser that this product shall b e free of defects in material and workmanship under normal use and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the perio d of one[...]

Notes: ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ _______[...]

___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ______________[...]

17[...]

www.compustar.com Toll Free: 888-820-3690 21911 68 th Ave S Kent, WA 98032 18[...]