Cortelco C60 инструкция обслуживания

V ersion 1.0 August 14, 2013 C6 0 V o IP P h o n e U s e r M a n u a l Cortelco 1703 S awyer Road Corinth, MS 3 8834 USA www.cortelco.com Tel: (662)2 87-5281 Fax:(662)287 - 3889[...]

2 Safety Notices Please read the fol lowing safety notices before installing or using this phone. They are crucial for the safe and reliable operation o f the dev ice.  Please use th e external pow er supply that is included in the packag e. Other power supplies m ay cause damag e to the device, af fect the behavior or ind uce noise.  Before [...]

3 T able of Co ntents 1 INTRODUCING C60 V O IP PHONE ............................................................................... 7 1.1 T HANK Y OU .......................................................................................................................... 7 1.2 B OX C ONTENTS .......................................................[...]

4 4.3 R EDIAL / U NREDIAL ........................................................................................................... 18 4.4 C LICK T O DIAL .................................................................................................................... 18 4.5 C ALL BACK ..........................................................[...]

5 7 ADV ANCED SETT INGS ................................................................................................ 26 7.1 G ENERAL ............................................................................................................................ 26 7.2 A CCOUNT ........................................................................[...]

6 8.3.4.3 DIAL PLAN ...................................................................................................................... 57 8.3.4.4 CONT ACT ......................................................................................................................... 59 8.3.4.5 REMOTE CONT ACT ..........................................[...]

7 1 Introducin g C60 VoIP Phone 1.1 Thank you Thank y ou for purchasing the C60 V oice Over I nt ernet Protocol (V oI P) tel ephone. The C60 is a fully featu red telephone that provides v oice comm unication over the data network. T his phone has all the features o f a traditional telephone and gives access to many data service features. This guide[...]

8 added. T o exit Phone Book mode, press and ho ld this k ey . Mute During a call pre ss this key to prevent the d istant party from hearing the conv ersation. The distant par ty will still b e heard. Line1/2 The C60 has 3 SI P lines. T he user m ay select either of them to place a ca ll if they have been reg istered to a SIP server . V olum e - /+[...]

9 1.4 Input/Output Ports Port Port name Description Power switch Input: 5V AC, 1A W AN 10/100M Connect to Netw ork LAN 10/100M Connect to PC Headset Port type: RJ-9 connec tor Handset Port type: RJ-9 connec t or External console interface Port type: RJ-45 conne ct or 1.5 Icon Introduct ion Icon Description Call out Call in Call hold Auto answer Cal[...]

10 In handset mode In headset mode SMS Missed call Call forward 1.6 LED Introduc tion 1.6.1 Program mable k ey LEDs for BLF LED S tat us Description S teady green The object is idle. Slow blinking red The object is ring ing. S teady red The object is ac tive. Fast blinking red The object has fa iled. Of f No t subscribed. 1.6.2 Program mable k ey L[...]

11 1.6.4 Program mable k ey LEDs for MWI LED S tat us Description Blinking Green There are new v oice mails. Of f There is no new v oice mail. 1.6.5 Power Ind ication LED (P ower Light Enabl ed) LED S tat us Description S teady red Power on. Blinking red There is an incom i ng call. Of f Power of f . 1.6.6 Power Ind ication LED (P ower Light Disabl[...]

12 2. Connect the hand set to the handset jack usi ng the hand set cable in th e packag e. 3. Connect the powe r supply to the DC port on the ba ck of the phone. Connect the power supply to a standard power ou tlet. Note tha t the power su pply will not be needed if your ne twork prov ides Power over Ethern et (PoE). 4. The phone’ s LCD screen di[...]

13 20. Use LEFT ARROW or RIGHT ARROW to enabl e PPPoE. 21. Press SA VE softkey . 22. Press BACK softk ey to return to th e W AN Setting s screen. 23. Press UP ARROW or DOWN ARROW to scroll to “ 1. Connection Mode. ” 24. Press OK. 25. Use LEFT ARROW or RIGHT ARROW to select “ PP PoE. ” 26. Press SA VE softkey . 27. Press BACK or EXI T 6 time[...]

14 33. Press BACK or EXI T 6 times to re turn to idle scre en. 34. Disconnect and rec onnect t he power supply so the phone will reboo t and apply the new settings. 2.2.3 DHCP Mode 1. Press the MENU so ftkey . 2. Scroll down to “ 3. Se t tings. ” 3. Press OK. 4. Scroll down to “ 2. Advanced Set tings. ” 5. Press OK. 6. The LCD will displ ay[...]

15 screen. The number m ay also be dialed first. Then the m ethod of speaking can be chose n. 3.1.2 Call Metho ds Press an available line button then use one o f the follo wing m ethods to place a cal l. 1. Dial the desired num ber using the keypad. 2. Press the History so f tkey . Use the navigation button s t o highlight the num ber t o call. Use[...]

16 phone numbe r for forward ing. 5. Press Save to sav e the chang es. 3.5 Call Hold 1. Press the Hold sof tkey to put the activ e call on hold. 2. If there is only one call on hold, press the Hold softk ey to retriev e the call. 3. If there is m ore than one call on hol d, press the l ine button, and th e Up/Down but ton to highlight the cal l, th[...]

17 3.9.3 Sem i-Attended Transfer During a conver sation, press the XFER k ey , dial the num ber t o which the ca ll is to be transferr ed . Then press the Send softkey . When the third party phon e begins to ring, press XFER to com plete the trans fer . NOTE: Call wa iting and call transfer must be ena bled. 3.10 3-way conference call 1. Press the [...]

18 *2* is the code. After saving the above configura tion, A can dial *2* plus the nu mber for B or C to join B and C ’ s call. The prefix can be set to any thing the user de sires that doe s not interfere with other dialing rules. 4.3 Redial / Unredia l If B is on a call wh en A calls, A will get busy tone. If A wants to connect to B as soon a s[...]

19 4.8 Application 4.8.1 SMS 1. Press Menu - >Applications- >Ent er- >SMS ->Enter . 2. Use the navig ation key s to highlight the op tions. Messages can b e read in the Inbox/Outbox. 3. Press Reply to rep ly to a message. Use the 2aB s oftkey to change the I nput Method. After entering the reply , press OK, use the nav igation key s t o[...]

20 4.9 Progra mmable Key Configuration The phone has 12 p rogramm abl e keys which can be se t to various funct ions. Th e functions are discussed in th e following sect ions. The default configura tion for each k ey is None which means the k ey has not been se t for any function. T o configure any func tion 1. Press Menu- >Settings->Basic Se[...]

21  F_LOCK – Locks t he keypad.  F_SMS – Send SMS  F_LOR – Call B ack  F_ POWER – Turn P ower LED On or Of f  F_SDTMF – Send DTMF  F_PREFI X – Enter prefix to be di aled. Ex: Access Code for ou t side line.  F_HOTDESKI NG – Clears all SI P inform ation and registers new SI P info rmation. 4.9.4 DTMF Dials a progra[...]

22 4. Use LEFT ARR OW or RI GHT ARROW to En able. 5.4 Ban Outgoing If this function is e nabled, the phon e cannot mak e out going calls. Press Menu - >Features- > Ban Outg oing- > Enter . 5.5 Dial Plan 1. Press Menu - >Features-> Enter ->D ial Plan-> Enter. 2. The following items in the dial plan ca n be enabled o r disabled: [...]

23 5.10 Ring from Heads et When this function is enabl ed, ring sound will be passe d to a connected he adset. Press Menu - >Features- > Enter - > Headset Ring - > Enter . 5.11 Power Light T his feature enable s the power lig ht at the bottom of the phon e. Press Menu - >Features-> Enter ->Pow er L ED -> Enter . 5.12 Hide DT[...]

24 6 Basic Setting 6.1 Keyboard 1. Press Menu - >Settings-> Enter ->Basic Set tings- > Ent er- >K eyboard- >Enter . 2. There are four sets of keys which c an be configured. a) DSS Keys – Keys on the ri ght side of the phone b eside the Speakerphone button or Line Keys. b) Programm able K eys – Arrow keys and O K key c) Desktop[...]

25 standard types and 3 user types. The user type can be configured from the web interface . The phone will ring at the s elected type sho rtly after it is selected. 3. Press Save. 4. Use BACK or EXI T to return to id le screen. 6.4 Voice Volu me 1. Press Menu - >Settings-> Enter ->Basic Set ting- > Enter- >V oice V olume->Enter .[...]

26 2. Use LEFT ARROW or RIGHT ARROW to choose E nglish or Chinese. 3. Press Save. 4. Use BACK or EXI T to return to id le screen. 7 Advanced Set tings 7.1 General For all the item s i n this sect ion, Press Menu- >Settings->Enter - >A dvanced settings- >Enter, and then enter the pa ssword. The default password is 123. I t can be changed[...]

27 7.2.3 Service Co de Sets the codes to be dialed t o an IP PBX to enable or disable the fol lowing functio ns. 1. Mode – Selects whe t her or not all these codes ar e active. 2. DND 3. Always CFW – Always Call Forward 4. Busy CFW - C all Forward Busy 5. No Answer CFW - Call Forward No Answer 6. Anonymous 7.3 Netw ork Enter Network settings as[...]

28  T elnet with CLI com mand 8.1.2 Pass word Configura tion There are two levels of access: root level and g eneral level. A user with root lev el access can browse and s et all config ur ation param eters, while a user with g eneral level ca n se t all configuration param et ers e xcept server param eters for SIP or IAX2.  Default user w it[...]

29 8.3 Configuratio n via WEB 8.3.1 BASIC 8.3.1.1 Status[...]

30 Field Name Explanation Network Shows the config uration inform ati on for W AN and LAN port, including connec tion mode of W AN port (S tatic, DHCP , PPPoE ), MAC address, I P address of W AN port and LA N port, D HCP server status for LAN po rt (ENA BLED or DI SA BLED). Accounts Shows the phone num bers and registration status fo r the 3 SIP LI[...]

31 8.3.1.2.1 Static IP If S tat ic IP is selected, this screen wi l l be disp layed. Information provided by the I SP should be entered. Click Back to retu rn to the Wiz ard screen. Click Next to go to Quick SI P Setti ngs 8.3.1.2.2 DHCP After selecting DHCP and clicking NEXT , the Quick SI P Settings sc reen will ap pea r . Click Back to return to[...]

32 8.3.1.2.4 Quick SIP Settings Field Name Explanation Display Nam e The name shown i n caller I D. Server Address SIP server address eithe r IP address or URI . Server Port SIP server port (usually 5060). Authentication Us er Login nam e or Authentication I D. Authentication P assword SIP password. SIP User Phone number . Enable Registra tion Subm[...]

33 8.3.1.3 Call Log Outgoing call log s can be seen on t his page. Field Name Explanation S tart T ime S tart time of the outgoing call Duration Duration of the ou tgoing call. Dialed Calls Account, protocol, and line of th e outgoing cal l. 8.3.1.4 Language Field name Explanation Language Set the languag e of phone. English is defaul t. Greeting W[...]

34 8.3.2 Net work 8.3.2.1 WAN C onfig Field Name Explanation Active I P Address The current I P address of the phone. Current Subnet Ma sk The current Subnet Mask. Current IP Gateway The current Ga teway I P address. MAC Address The MAC address o f the phone. MAC T imestamp T ime the MAC address was obtained. W AN Settings The phone suppor ts three[...]

35 8.3.2.1.1 Static IP If S tat ic IP is chosen, the screen below will app ear . Enter values prov ided by the ISP . 8.3.2.1.2 DHCP If DHCP is chosen, all conf iguration inform at ion will b e provided by a DH CP serv er . Contac t the ISP to determine if DH CP is used. 8.3.2.1.3 PPPoE If PPPoE is chos en, the screen be low will appe ar . Enter the[...]

36 8.3.2.2 LAN C onfig Field Name Explanation IP Address LAN static I P . Subnet Mask LAN Subnet Mask . DHCP Service Activate DHCP server for LAN port. The phone must be rebooted for the DHCP server sett ing to take ef fect. NA T En able NA T op er ation Port Mirror Port Mirror can on ly be activ ated in bridge m ode. I f activated, the data stream[...]

37 Chart 1 shows a ne twork switch w ith no VLAN. Any broadcast frames will b e transmitted to all other port s. For exam ple, and frames broadcas t from Port 1 w ill be sent to Ports 2, 3, and 4. Chart 2 shows an e xample w ith two VLANs ind icated by red and blue. In this exam ple, fr ames broadc ast from Port 1 will on ly go to Port 2 si nce Por[...]

38 Field Name Explanation Enable LLDP Enable or Disable L i nk Lay er Discovery Prot ocol (LLDP) Packet Interv al The time interv al for sending LLDP Packets Enable Learning Funct ion Enables the telephon e to synchron ize its VLAN data with the Network Switch. The telephone wi ll autom atically synchronize DSCP, 802.1p, and VLA N ID values even if[...]

39 8.3.2.4 Service Port Set the port values for T elnet/HTTP/R TP on this page. Field Name Explanation W eb Server T ype Specify W eb Server T ype – HTTP or H TTPS HTTP Port Port for web brow ser access. Defa ult value is 8 0. T o enhance security , change this from the default. S etting this port to 0 will disable HTTP access. Example: The IP ad[...]

40 8.3.2.5 DHCP SERV IC E Field Name Explanation DHCP Client T able IP -MAC mapping table. I f the LAN por t of the phone c onnects to a device, this table will show its IP and MAC address. Leased T able Name Name of the lease t able. S tart IP Address Beginning I P address of the lease table. End IP Address Ending I P addres s of the lease table. [...]

41 8.3.2.6 TIME&DA TE Set the time z one and SNTP ( Sim ple Network Tim e Protocol) server on this page. Daylight savings time conf iguration and m anual tim e and date entry are also done on this pag e Field Name Explanation Simple Network Time Pro tocol (SNTP) Set tings Enable SNTP Enable or Disable SN T P Enable DHCP T ime If this is enabled[...]

42 Daylight Saving Time Se ttings Enable Enable daylight saving tim e. Of fset(minutes) DST of fset. Default is 60 m inutes. Month S ta rt and end m onth for DS T W eek S tart and end week fo r DST Day S tart and end day for DST Hour S tart and end hour for DS T Minute S tart and end minute fo r DST Manual T ime Settings Enter the values fo r the c[...]

43 Field Name Explanation Choose the sip lin e to config ured (SIP 1 – SIP 3). Click the dropdown arrow t o select the line. Status Shows registrat ion status. Will show “Reg istered” i f registered or “Unapplied” i f not registered. Server Address SIP server I P address or URI. Server Port SIP server port. De fault is 5 060. Authenticati[...]

44 Display Nam e Set the display nam e. T his nam e is shown on Ca ller ID. Enable Registra tion Check to subm it registration inform ati on. Domain Realm SIP Dom ain if different tha n the SIP Reg istrar Server. Proxy Server Addr ess SIP proxy serv er IP address or UR I （ This is norm al ly the sam e as the SIP Reg istrar Server) Proxy Server Po[...]

45 Subscribe For MWI If enabled, the phone w ill send Message Waiting Indication (MWI) Subscribe m essa ge to th e SIP Serv er MWI Num ber Specify the num ber to call to re trieve Voice Me ssages. Subscribe Period Time interv al between MWI Subscri be Messag es. Conference Type Choose Conferenc e Type, either local or network Conference Num ber Num[...]

46 Different VoI P Service pro viders may require different m odes. Local port SIP port. Default is 5060. Ring type Set ring tone. T here are 9 st andard opt ions and 3 user options. Enable Rport Enable/Disable suppo r t for NA T traversal via RFC35 81 (Rport) . Enable PRACK Enable or disabl e SIP PR ACK function. Default is O FF. I t is suggested [...]

47 Registration Fail ure Retry Time Registration fai lure retry tim e – If registration fails, the phone wil l attempt to register ag ain after reg istration failu re retry tim e. This will affect all lines 8.3.3.2 IAX2 Field Name Explanation S tatus Shows registrat ion status. Will show “Reg istered” i f registered or “Unapplied” i f not[...]

48 non- num eric, this number can be used to replac e the echo test text. This allows dialing a number to perform an echo v oice test. This function i s provided to tes t whether com munication throug h the server . Echo T est T ext Echo test text Refresh Time Expiration tim e of IAX2 serv er registration. Allowed v al ues are between 60 and 3600 s[...]

49 Field Name Explanation STUN NAT Tran sversal Shows whether or no t STUN N AT Transversal was su cc essful. Server Address STUN Server I P addres s Server Port STUN Server Por t – Default is 3478. Binding Period STUN blinding period – STUN packet s are sent at this interval to keep the NAT m apping active. SIP Waiting Tim e Waiting tim e for [...]

50 Example 2: Subst itution – T o dial a long distance call to Bei jing requires di aling a rea code 010 before the lo cal phone number . Using this fea ture 1 can be subs tituted for 010. For example, to ca ll 62213123 would only requ ire dialing 162213123 instead o f 01062213123. Example 3: Addition – T wo examples are show n. In the first ca[...]

51 Dial Peer Ex amples Web Interface Explanation Example Set phone num ber, Destination, Ali as and Dele te Length. Phone number is XXXT; Destination is 255.255 .255.255 (0.0.0.2) and Alias is del. Any phone num ber that begins with XXX will b e sent via SIP2 after the fir st several digits are deleted de pending on the delete length. D ial “9333[...]

52 The phone will add th e alias to the end of the di aled number if the dialed num ber matches the template in the Ph one Number box. Dial “8309“ The SIP1 serv er will receive “07558309” Set Phone Num ber, Alias and Delete Length. P hone number is XXXT and Alia s is rep: xxx If the dialed phone n umber starts with the digi ts in the Phone [...]

53 Third Codec The third codec cho ice: G.711A /u, G.722, G.723, G .729, G.726, None Fourth Codec The forth codec cho i ce: G.711A /u, G.722, G.723, G .729, G.726, None Fifth Codec The fifth codec c hoice G.711A /u, G.722, G.723, G.72 9 , G.726, None Sixth codec The sixth codec cho ice G.7 11A/u, G.722, G .723, G.729, G.726, None Onhook Time Time t[...]

54 8.3.4.2 FEATURE This page config ures various fe atures such as Hotline, Call Transfer , Call W aiti ng, etc. Field Name Explanation Do Not Disturb If enabled, the phone w ill reject incoming call s. T he callers rece ive busy tone. Outgoing calls may be m ade. Enable Call Trans fer If enabled, Call Tran sfer is allow ed. Semi-A ttended Transfer[...]

55 Auto Redial Times Maximum number of auto redia l attem pts. Auto Headset Automatically answ er s call on head set. Enable I ntercom If enabled, al lows intercom cal ls. Enable I ntercom Tone If enabled, play s intercom ring tone to alert to an intercom call . P2P IP P refix Set Prefix for peer to peer IP call. Fo r example: You w i sh to dial 19[...]

56 Ring from H eadset If this is enabled and a headset is connected, r ing tone will be played in the headset. Enable I ntercom Mute If enabled, m utes incoming cal ls during an intercom call Enable I ntercom Barge If enabled, the p hone will auto- answer an intercom cal l during an outside call. If an interco m call is estab lished, a seco nd inte[...]

57 8.3.4.3 DIAL P LAN This phone suppo rts 7 dialing modes: 1. End with “#”– Dia l the desired num ber , and press # to send it to the server . 2. Fixed Length – The number will be sen t to the serv er after the spec ified number of digits are dialed. 3. T ime Out – Number will be sent to the server after the specified tim e. 4. User Defi[...]

58 5. Press # to Do Bl ind T ransfe r - Press # after enteri ng the tar get number for the transfer . The phone will transfer the current ca l l to the third p arty . 6. Blind T ransfer on Onhook - Hang up after entering the targ et number for the transfer . The phone will transfe r the current c all to the thir d party . 7. Attended Trans fer on O[...]

59 8.3.4.4 CONTA CT Enter the nam e, phone number and r ing type fo r each contact here. Field Name Explanation Phonebook Tab les Group Dropdown box to select gro up Name Contact name[...]

60 Office Num ber, Mobile Number, Other Num ber Contact phone num ber s Ring Type Ring type for thi s contact Group Contact group for this contact Add Contact Name Contact name Office Num ber, Mobile Number, Other Num ber Contact phone num ber s Line Select line for a ssociated co ntact number Ring Type Ring type for thi s contact Group Setting Cho[...]

61 8.3.4.5 REMOTE C ONTACT Allows access to remote co ntact lists eithe r via XML or LDAP . TFTP example: Set the Pho nebook Nam e as cortelco - Serv er URL is tftp://192.168.1.3/ admin/phonebook /index.xml. LDAP example: Server UR L is ldap: //192.168.1.3/dc= winline,dc=com . Remote Phonebook S ettin g Phonebook Nam e Phonebook nam e displayed on [...]

62 8.3.5 Functi on Key The phone has 8 pr ogrammable DSS /Function keys with associa ted LEDs and 2 programm able Line key s with LEDs. The 4 directional arrow k eys and the O K button a re also programm able. This screen also se ts the LCD contr ast and en ables the back light. For additional DSS/Func tion buttons, up t o 5 C10 Expa nsion m odules[...]

63 Screen Configurat ion Field Name Explanation Contrast Set screen contras t Enable Backlight Enable/disable LCD b ac klig ht. Line Key Settings /Function Key S ettings Field Name Explanation Key Key Nam e T ype Select the ty pe of function the k ey is to perform . Choices are:  None  BLF List Key – If the SIP se rver supports this functio[...]

64 8.3.5.2 Softk eys Configure the fun ctions perform ed by the softkey s under the LCD in various phon e operating modes.[...]

65 8.3.5.3 EXT Keys These are the key s on the C10 Expan si on Module. Up to 5 modules m ay be connected to one phone. The phone can power one m odule. Additional modules w ill require a sep arate power supply . See the C10 docum ent ation for in stallation in structions. The keys have the same capabil ities as the Funct ion Keys. 8.3.6 Maintenan c[...]

66[...]

67 Auto Provision Se tting Field Name Explanation Current Config V ersion Show the current con fig file’s version. I f t he v ersion of configuration dow nloaded i s higher than th is , the config uration will be upgraded. I f the endpoints conf irm the conf iguration by the Digest method, t he configuration w i ll not be upg r aded unless it dif[...]

68 PnP Port PnP Server Port PnP T ransport PnP T ransfer protocol – U DP or TCP PnP Interval Interval tim e for querying PnP server . Default is 1 hour . Phone Flash Se ttings Server Address Set FTP/TF TP/HTTP server I P addr ess for auto up date. The address can be an IP addr ess or Do main name with subdirecto ry . Protocol T ype Specify the Pr[...]

69 Le vel Name Description 0 Emer gency System is unusab le. This is the highest d ebug info le vel. 1 Alert Action m ust be taken imm ediately . 2 Critical Critical condit ions. System is probably working incorrectly . 3 Error Error conditions. Sy st em may not work correctly . 4 W arning W arning condi tions. System may work correctly but needs a[...]

70 8.3.6.3 Config Sett ing Config Setti ng Field Name Explanation Save Configura tion Save the current phone config uration. Clicking this sa ves all configuration chang es and m a kes them ef fective im mediately . Backup Configura tion Save the phone co nfiguration to a txt or xm l file. Please note to Right click on the cho i ce and the n choose[...]

71 8.3.6.4 Update This page allows up l oading conf iguration files to the phone. Update Field Name Explanation Web Update Web Update Browse to the con fig file, a nd press Update to load it to the phone. V arious types of fi les can be loa ded here includ ing firmw are, ring tones, local phon ebook and config files in either text or xm l for mat. [...]

72 T ype Action to be execu ted by the phone. 1. Application upda te - download system update file 2. Config file expo rt - Upload config f ile to FTP/TF TP server . It can then be nam ed and saved. 3. Config file im port - Download th e config file f rom FTP/ TFTP server . T he config uration will be ef fective af ter the phone is reset. 4. Phone [...]

73 8.3.6.5 Access User accounts can b e a dded or deleted from this page. T he autho rity of accounts can also be changed. Access Con figuration Field Name Explanation LCD Menu Pass word Settings Menu Password Set s the passwo rd for enteri ng the setup menu fr om the phone keypad. The passwo r d must be only digits. User Settings This table shows [...]

74 8.3.6.6 Reboot Some configura tion modificat ions require a reboot to becom e effective. Clicking t he Reboot button will caus e the phone to reboot imm ediat ely . Note : Be su re to save the c onfiguration be fore rebooting . 8.3.7 Security 8.3.7.1 WEB FILTER WEB Filter The W eb filter is used to lim it access to the phone. When the web filter[...]

75 8.3.7.2 Firewall Firewall Confi gu ration Firewall rules can b e used to prevent unau t horized I nt ernet users from accessing priv ate networks connec ted to this phone (input rule), or p revent unauthoriz ed devices connected to this phone from ac cessing the I nter net (output ru le). Each rule type supp orts a maxim um of 10 items. Field Na[...]

76 When a connec ted device tr ies to access 192.168.1.118 , t he phone w ill deny the re quest because of the ou t_access rule. Acces s to any other I P address will be a llowed. Click the Delete but ton to delete the selected rule. 8.3.7.3 Net work Address Tran slation (N AT ) NA T is the process of m odifying IP address and port inform at ion in[...]

77 connectivity to specific hosts in the in ternal network , althoug h communication wi th other hosts in the DMZ and t o the extern al network is allowed. T his al lows hosts in the DMZ to provide services t o both the internal and exte rnal netwo rk, while a firewa ll controls the traff ic between the DMZ servers and the internal ne twork clients[...]

78 Network Address T ranslation (NA T) T able Shows the NA T T CP and UDP mapping tables NA T T able O ption T ransfer T ype Select the T CP or UDP protocol. Inside I P Set the local I P address of device. Inside Port Set the LAN (ins ide) port for NA T mapping Outside Port Set the W AN (outside) p ort for NA T mapping Note: After ente ring setting[...]

79 VPN Server Address Set VPN L2 TP Se rver I P address . VPN User Set User Nam e access to VPN L2TP Ser ver . VPN Password Set Password access to V PN L2TP Ser ver . 8.3.7.5 Security Field Name Explanation Update Security File Select Security Fi le Browse to the se curity file to be upd at ed. Click the Update button to update. Delete Security Fil[...]

V ersion 1.0 August 14, 2013 9 Appendix 9.1 Specification 9.1.1 Hardware Item Specification Power Adapter Input: 100- 240V Output: 5V 1A Port W AN 10/100Base- T RJ-45 1 POR T LAN 10/100Base- T RJ-45 1 POR T EXT RJ45 1 POR T Headset RJ9 1 POR T Power Consum pt ion Idle: 2.5W Active: 2.8W LCD Size 128x64 53.5 x 70mm Operation T emperature 0 ～ 40 ?[...]

- 81 -  SIP domain  SIP authentication  none  basic  MD5  DNS  Peer to Peer / IP call  Autom atic line selection  9 S t andard ring tones a nd 3 user -defin ed ring tones  DTMF  SIP info  DTMF Relay (I n-Band)  RFC2833  AUT O  SIP applications  Call Forward  Call T ransfer （ Blind/Attended ） ?[...]

- 82 -  Phonebook 500 r ecords  Incom ing Calls  Outgoing Calls  Miss ed Calls  Max of 300 Records Ea ch  Supports vCard/XML/CS V  Support I AX2  2 Programm able Li ne/DSS key s  8 DSS k eys  Programm able Soft Keys  Programm able Functi on Ke ys  Code synchron ization  IP PBX  IMS  Supports Click to Dia[...]

- 83 -  W an Port Suppo r ts Main DN S and Secondary DNS  Supports DNS v i a DHCP or S tatic DNS  Supports DHC P client on W AN  Supports DHC P server on LAN  QoS with Dif fServ  Network T ools in T elnet Serv er  Ping  T race Route  T elnet Client 9.1.4 Maintenan ce and mana gement  Firmw are Upgrade  POST  HTTP[...]

- 84 - 9.2 Digit-character map table Keypad Character Keypad Character 1 @ 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v 3 D E F d e f 9 W X Y Z w x y z 4 G H I g h i */. 5 J K L j k l 0 6 M N O m n o # /=[...]