Craftsman 118.22000 инструкция обслуживания

Operator's Manual I;RRFTSMRN+I 7-in. Tile Wet Saw with LASER TRAC TM Model No. 118.22000 A z-_CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product. • WARRANTY • SAFETY • ASSEMBLY • OPERATION • MAINTENANCE Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. Visi[...]

I I I I Warranty .................................................................... Page 2 Safety Symbols .................................................. Page 3 Safety Instructions ............................................... Pages 3-11 Description ........................................................ Page 12 Unpacking ..................[...]

I I I I HAZARD SYMBOLS Some of the followingsymbols may be used on thistool. Please study them and learn their meaning.Proper interpretation of these symbolswill allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION / EXPLANATION Q No Hands Symbol Failure to keep your hands away from the blade will result in serious personal injur[...]

I I I I TOOL USE AND CARE SAFETY z:_WARNING: BE SURE to read and understand all instructions before operating this saw. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 1. BE SURE the splash guard is intact and in good condition. 2. DO NOT wash or allow water to come in direct contac[...]

I I I I i 1 EXTENSION CORDS 1. USE ONLY 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that will accept the tool's plug. 2. Use a proper extension cord. ONLY use cords listed by Underwriters Laboratories (UL). Other extension cords can cause a drop in line voltage, resulting in a loss of power and overheating o[...]

I I I I SAFETY RULES FOR TILE WET SAWS cont. 6. NEVER try to cut freehand. Make sure that the tile to be cut is pressed firmly against the rip fence. 7. NEVER cut pieces too small to be held securely against the fence without leaving enough space for your hand to be a safe distance from the blade. 8. NEVER cut more than one tile at a time. 9. KEEP [...]

I I I I KNOW YOUR SAW (Fig. 3) Your tile wet saw has a precision-built electric motor and it should only be connected to a 1 20-volt, 60Hz AC ONLY power supply (normal household currant). DO NOT operate on direct current (DC). The large voltage drop would cause a loss of power and the motor would overheat. If the saw does not operate when plugged i[...]

I I I I 1. Place carton on the floor in an area with sufficient space to inspect your saw. 2. Remove carton and packing materials from around tool. 3. Inspect the saw for loose or damaged parts. If any parts are damaged or missing, return the saw to your nearest Sears Store to have it replaced. LOOSE PARTS LIST The following items are included with[...]

I I I I MOUNTING LASER SYSTEM 1. Locate laser package and find the following parts as shown in (Fig. 14): a) Laser light system. b) Two 6/32 screws with washers. 2. Loosen bolt and remove cover. Install two AAA batteries (Fig.15), making sure both terminals are positioned correctly as the marks on the cover show, then replace cover. 3. Screw laser [...]

I I I I z_WARNiNG:Turn off the saw and remove the plug from the outlet BEFORE adding or removing accessories and making adjustments. Failure to unplug the saw could result in accidental starting causing possible serious injury ACAUTION: This tile saw is designed to work with water. Before any cutting operation, make sure that the water level inside[...]

I I I I MOVING THE SAW cont. 4. Your tile wet saw has been equipped with a set of wheels for easy transporting. They are to be used when the legs of the saw table are in the closed, or folded up position. To use wheels, simply pull out and down on the black handle located on the wheels' axle (Fig. 32). When not using the wheels, and to set up [...]

I I I I REPLACING THE PUMP Only use identical replacement parts, available at your Sears Parts and Repair Center. To locate a Sears Parts and Repair Store near you, call the 800 number located on the back of this manual. 1. Remove the water tray from the saw table. Remove pump from housing in water tray. Set tray aside. Loosen knob on black cover b[...]

I I I I oJ 24 / 0 0 _. 0 o 0 • 0 C 0__ W 0;0; _zc C O0 ° I ON- -- C _z-_ oN O __1 E | b., 6 0. F, O. 6 O. i- 0 ii 0 O 0. e,l cO ooo o o o oJ oJ oJ oJ __< T _, ooo o o o oJ oJ oJ oJ o o rn 03 o o o oJ oJ r_ oooooo oooooo oooooo _O__ OOOOOOOO OOOOOOOO OOOOOOOO _=_ a __*_= __o _II 0 I_ 00 o o o o o o oJ oJ 0J 0J .__ o © >- O3 o o o oJ oJ ([...]

NOTES 26 NOTES 27[...]

Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling system, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door op[...]