Craftsman 315.111920 инструкция обслуживания

Owner's Manual CRAFTSMAN ° 3/8 in. Two Speed / Reversible CORDLESS DRILL Model No. 315.111920 -_, CAUTION: Read and follow all Safety Rules and Operating Ir_structions before first use of this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA 972000-494 12-97[...]

• Warranty ......................................................................................................................................................... 2 • Introduction and Product Specifications ......................................................................................................... 2 • Rules For Safe Operation [...]

The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attenUon and understanding. The safety warnings do not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL[...]

RULES FOR SAFE OPERATION (Continued) NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvents to clean your tool[...]

RULES FOR SAFE OPERATION (Continued) • An extension cord should not be used unless • absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: • a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. Tha[...]

The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • High Speed Bits (For Wood or Metal)...3/4 in. Max. • 30-Pc. Power Screwdriver/Nutdriver Set and Case • Keyless Chuck (Item No. 20988) • 17-Pc. Power Screwddver/Nutdriver Set and Case _k WARNING: The use of att[...]

_lb WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. _ WARNING: Do not allow familiarity with your drill to make you careless. Remember that a careless fraction of a second is sufficient to inflict[...]

SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. SELECTOR BA'n'ERY CENTERPosrnoN (LOCK) SWITCH TRIGGER Fig. 2 TWO SPEED Your drill has a two speed feature in the switch. Depress the switch trigger halfway for driving screws at low speed. Depress the switch trigger all the [...]

SWITCH LOCK See Figure 4. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position. SELECTOR REVERSE KEYLESS CHUCK SeeFigure5. Your new drill has a keyless chuck. As the name im[...]

INSTALLING BITS See Figure 6. • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 2. • Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck jaws. ?[...]

WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible sedous injury. DRILLING See Figure 8. I Move the ddll bit into the workpiece applying only enough pressure to keep the bit cutting. Do not force or apply side press[...]

CHUCK REMOVAL See Figures 10, 11, and 12. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely. • Tap the al[...]

,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil[...]

14[...]

CRAFTSMAN 3/8 INCH CORDLESS DRILL - MODEL NO. 315.111920 I 1 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 In. CORDLESS DRILL or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 Key PaN No. Number 1 616478-003 2 973094-001 [...]

For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro,7 days a week 1-800-366-PART (1-800-366-7278) For repairservice Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area Call 24 hours a day,7 days a week _ 1-800-488-1 222 l-&apos[...]