Craftsman 315.11521 инструкция обслуживания

Operator's Manual 3/8 in. CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.115200 13.2 Volt 315.115210 15.6 Volt Save this manual for future reference ,_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck[...]

• Warranty .......................................................................................................................................................................... 2 • lntroducton ....................................................................................................................................................[...]

WARNING: READ AND UNDERSTAND ALL IN- STRUCTIONS. Failure to fo{Iow a(I {nstruct(ons {{sted be(ow, may result {n electric shock, fire and/or seri- ous personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmo- sphe[...]

SERVICE • Tool service must be performed only by qualified repair personnel, Service or maintenance performed by unqualified personnel may result in a risk of injury. • When servicing a tool, use only identical replace= ment parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Main[...]

WARNING: Never use a battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately. Failure to heed this warning can result in serious personal injury. • Before using battery charger, read all instructions and cautionary markings in this manual, on battery char[...]

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power rain Minutes Time "%, Alternat[...]

The followingsignal words and meanings are intendedto explainthe levels of risk associated with this product, SYMBOL SIGNAL MEANING DANGER: WARNING: CAUTION: CAUTION: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could r[...]

PRODUCT SPECIFICATIONS DRILL-DRIVER 315,115200 315.115210 Chuck 3/8 in. Keyless 3/8 in. Keyiess Motor 13.2 Volts 15.6 Volts Gear Train One Speed One Speed Switch Variable Speed VariabJe Speed No Load Speed 0-600imin 0-600/rain Battery 130139018 130139015 Maximum Torque 100 in.lb. 110 in.lb. Charger 140287001 140250013 Rating 120 V, 60 Hz,AC only 12[...]

KEYLESS CHUCK TORQUE ADJUSTMENT RING BIT STORAGE SCREWDRIVER BITS BATTERY SWITCH TRIGGER DIRECTION OF ROTATION SELECTOR (FORWARD / REVERSE) CHARGING STAND RED LIGHT CHARGER BATTERY PACK SHOWN IN TOOL WRIST STRAP Fig. 1 Instructions Your drill has been sh(pped comp(etely assembled. • Carefu(ly remove the tool and accessories from the box. • Ma[...]

_1 WARNING: Do not allow familiarity with this tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. CHARGING BATTERY PACK See Figure 1, Page 9 The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it at least 3 [...]

SWITCH See Figure 2, To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. FORWARD/REVERSE/CENTER LOCK SELECTOR TO INSTALL BATTERY PACK • Lock switch trigger on this drill by placing the direction of rotation se{ector in center position. See Figure 4. • Place battery pack in this drill Align raised rib o[...]

SWITCH LOCK See Figure 4, The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in center position. SELECTOR WITH CENTER LOCK POSITION REVERSE KEYLESS CHUCK See Figur[...]

INSTALLING BITS See Figure 6, • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 4. • Open or close chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from failing out of the chuck iaws.[...]

BIT STORAGE See Figure 9, When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in Figure 9. SCREWDRIVER BITS BIT STORAGE AREA L Fig. 9 _i WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects bein[...]

CHUCK REMOVAL See Figures 11, 12, and 13. The chuck must be removed in order to use some acces- sories. To remove: • Lock the switch trigger by placing the direction of rota- tion selector in center position. See Figure 4. • insert a 5/16 in. or larger hex key into the chuck of your drill and tighten the chuck jaws securely. • Tap the hex key[...]

_ WARNING: When servicing, use only identical Craftsman replacement parts, Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil,[...]

17[...]

CRAFTSMAN 3/8in 13;2VOLT CORDLESS DRiLLeD RIVER_ M O DEL NO_3i5iii5200 _ The model number w{{I be found on a plate attached to the motor housing. A{ways mention the model | number {n all correspondence regard{ng your 3/8 in., 13.2 VOLT CORDLESS DRILL-DRIVER or when J ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 4 Key No, 1[...]

C RAFTSMAN 3/8in 15:6VOLT C OR D LESS D R iLL_ D RIVER_ M O D EL NO_3 i5iii52i 0 _ The model number w{{I be found on a plate attached to the motor housing. A{ways mention the model | number {n all correspondence regard{ng your 3/8 in., 15.6 VOLT CORDLESS DRILL-DRIVER or when J ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 4[...]