Craftsman 315.116211 инструкция обслуживания

Owner's Manual RANDOM ORBIT SANDER Double Insulated Model No. 315.116211 Save this manual for future reference ,_ CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears Roebuck and Co., Hoffman Estates, IL 60179 USA visit the Craftsman web page: www.sears.[...]

• Table Of Contents .......................................................................................................................................... 2 • Warranty ......................................................................................................................................................... 2 • Introduction .[...]

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBO[...]

RULES FOR SAFE OPERATION (Continued) WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in tool's moving parts and cause personal injury. Rubber gloves and nonskid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents. AL[...]

RULES FOR SAFE OPERATION (Continued) CHECK DAMAGED PARTS. Before further use of the tool, a guard or: other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions [...]

Backing pad No Load Speed Motion 5 in. Rating 12,500 opm Input Random Orbit Paper Type 120 Volts, 60 Hz, AC 2.4 amperes Pressure Sensitive Adhesive Backed Your sander has been shipped completely assembled except for the dust bagassembly. Inspect it carefully to make sure no breakage or damage hasoccurred during shipping. If any parts are damaged or[...]

KNOW YOUR SANDER See Figure 1. Before attempting to use your sander, familiarize yourself with all operating features and safety requirements. _I, WARNING: If any parts are missing do not operate your sander until the missing parts are replaced. Failure to do so could result in possible serious injury. Your sander has a comfortable palm grip that p[...]

APPLICATIONS (Use only for the purposes listed below) • Sanding on wood surfaces. • Removing rust from and sanding steel surfaces. SANDING DISC SELECTION Selecting the correct size grit and type sanding disc is an extremely important step in achieving a high quality sanded finish. Aluminum oxide, silicon carbide, and other synthetic abrasives a[...]

DUSTLESS SANDING See Figures 3 and 4. The dust bag assembly provides a dust collection system for your sander. It can be installed by slipping it over the blower exhaust with a twisting motion. Sanding dust is drawn up through the holes of the sanding disc to collect in the dust bag during sanding operation. Note: For more efficient operation, empt[...]

,_ WARNING: Before connecting your sander to power supply source, always check to be sure the switch is not in ON position. Failure to do so could result in accidental starting of your sander resulting in possible serious injury. PREPARING FOR OPERATION _k CAUTION: Be careful not to let hand cover your the air vents. SANDING See Figures 6 and 7. Cl[...]

_L WARNING: When servicing use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. CLEANING DUST BAG ASSEMBLY See Figures 8 and 9. As previously mentioned, for more efficient operation, empty dust bag when no more than half full. This will permit the air to flow through the bag better. TO [...]

CRAFTSMAN RANDOM ORBIT SANDER- MODEL NO. 315.116211 -_- SEE NOTE "A" Page 13 2 7 10 12 OPTIONAL CONVERSION PAD 12[...]

CRAFTSMAN RANDOM ORBIT SANDER - MODEL NO. 315.116211 I I The model number will be found on a plate attached to the motor housing. Always mention the model | number in all correspondence regarding your RANDOM ORBIT SANDER or when ordering repair J parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key No. PARTS LIST Part Description Quan. Number 1[...]

Get it fixed, at your home or ours! For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sM Anytime, day or night (1-800-469-4663) www.sears.com To bring _n products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & R[...]