Craftsman SP5373 инструкция обслуживания

Save This Manual For Future Reference Dust CoBlection System Serial Number Model and serial number may be found on the motor cover. You should record both model and serial number in a safe place for future use. FOR YOUR SAFETY: READ ALL INSTRUCTIONS CAREFULLY. DUST COLLECTION S YS TEM ° assembmy o operation "parts o repamr Sold by SEARS, RO[...]

• • •:• •_ :-•-::_:/.' - • ••• ,.,. ,,i _. FULL:ONEYEAR WARRANTY ON CRAFTSMAN DUST C-OLL_ If within 0ne year from the date of purchase, thls Craftsman Dust Collection System falls due to a defect in maierlal0r workmanship; Sears wil! repair it, free of charge; WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST S[...]

_ CAUTION: if usingthts Dust Collection System to help keep airborne wood dust in heavy usage within acceptable limits, you must regularly monitor air borne dust andmaintain Dust Collection System to avoid exceeding dust limits. Each application is unique. Your maintenance schedule must, there- fore, be tailored to your specific use of this Dust Co[...]

:4 AFETY INSTRUCTIONS :FOR: POWER TOOLS 1. KNOWYOUR TOOL Read and undersiarid owner's manual and labels 3tt_xed to the tOOl [:.earn its appiicalion and limita- nuns as welt as its(specffic potenl.iat hazards pec, uafiar tolhis tOoL 2, _ GROUND THE TOOL This Io01 is equipped with an approved 3-conductor cord and a 3prong grounding type plug to [...]

........ iiiiii ii ,i ,i, introduction The Craftsman Dust Collection System is specifically designed to capture sawdust and wood chips at the source. The fine dust is filtered by the upper bag while heavy particles settle in the lower bag for easy removal. Do not use as a vacuum. _ CAUTION: The blower housing containsa high speed fan bgade that can[...]

I_NPAC_KiR_ i_::_ _HECKING CARTON €ONTENTSI! Tools Needed Adjustable Wrench Screwdriver ...... i CARTON CONTENTS LISTf Key Descrlptlon Qty, A _; FiltedDust Bag ........................................... 1 B Fitter/Dust Bag Hanger ........................... 1 C Handle. ...................................................... 1 D Filtration Housing[...]

assembmy MOUNTING FRONT PRVOTING CASTERS 1, Locate the following items from the loose parts bag: Description Qty. A Pivoting Casters ................................... 2 B Hex Nuts* (3/8 - 16) .............................. 2 C Flat Washers* (3/8 x 3/4) ...................... 4 D Acorn Nuts*, ......................................... 2 E Base Plat[...]

:: 4i Support the opposite side of Filtration Housingw_th a b[()ck of wood_ A;: Ptace: O÷Ring in relief of Inlet pipe (See page!8) 5.: Position Inlet Guardin tine with the threaded holes On the base of the Filtration Housing. NOTE: Makesureinlet Guard is pointing to rear of machine_ 6. Place Iockwasher and flat washer on hex screw and insert throu[...]

IIIIL u i_ MOUNTING INLET BRACKET 1, Locate the following items from the loose parts bag: Description Qty. A Flat Washers* (5/16x 11/16xl/!6) ..... 2 B Hex Screws* (M8 x 1.25 - 12) ............... 2 C Flat Washers *(1/4 x 1/2) ...................... 2 D Hex Screws* (M6 x 1 - 12) ................... 2 2, Insert Inlet Bracket between relief flange of[...]

AG HOLDER 1_ LoCate the foUowing items from the loose parts bag: Description Qty. ..... A Hex Nut* (M6 X 1) ................................ 1 B Lockwasher* (1/4) ........................... ..:: 1 C Flat Washer* (1/4x 1/2) ....................... 1 2_ Attach hexnut to threaded portion of Filter/Dust Bag Holderand place lockwasher and flat washer o[...]

CHiP BAG ASSEMBLY - LOWER FiLTRATiON HOUSING 1. Insert lower Chip Bag by tilting the Metal Reinforced Bandat an angle and position it through the hole inthe lower Filtration Housing. 2. Tuck one side of the Band under the Sawdust Chute Extension. 3. Allow the opposite side to rest on the ridge of the opening. 4. Tug on the Chip Bag to insure proper[...]

ii:i;ii!ii!iiii!iiiiii i i!i !ii I'H iiii: : / i ThliS _Dust !i¢olie_ion System i!s designed to be corn elecffiCai parts, do not operate this Dust Collection netted directly t0:thewoodwOrking machines. Pieasel System in!areas with flammable vapors such as useoniythel_artS provided for maximum effJctency: ilghterl fluld, cleaners, oil-base pai[...]

', rlqplll i ....... ................. ............... jl ,l! i ON ! OFF SWITCH On the rear of the Motor Housing above the Handle, is the Switch Box. The ON!OFF Switch has the ability to be turned "ON" when the Red Key is properly installed. Switch to the "ON" position by moving the switch upward. Turn the switch "OFF&[...]

...................... ' .......... .............. " " " .... " 4 _1 , , _ __ TION: CONNECT TO _ A::120Vi 15"AMP, BRANCH CIRCUIT AND USEA15=AMP,TIME DELAY FUSE OR CIRCUIT BREAKER; FAILURE TO CONNECT IN THIS WAY CAN RESULT IN INJURY FROI_I SHOCK OR FIRE, Your Dust Collection System must be properly grounded: Not all out[...]

i l i i i , inl _ WARNING: FOR YOUR OWN SAFETY, TURN SWITCH "OFF" AND REMOVE PLUG FROM POWER SOURCE OUTLET BEFORE MAINTAINING YOUR DUST COLLECTION SYSTEM ...... _ WARNING: TO AVOID INJURY FROM ELEC- .___I-- j_ TRIC SHOCK OR SUDDENLY STARTING UNIT, AL- /_ WAYS REMOVE SWITCH KEY AND KEEP UN- .-_.. i " PLUGGED WHILE UNIT IS DISASSEMBLED[...]

MOTOR : Excessive dust fin _tO_: could cause excessive heat: in motor. : Every effort shou!d be imade _to: prevent foreign material fromenteting the motor:i When operated ur_ler condi- tions likely to permit accumtllations of dust, dirt; or waste within the motor, a visual inspection should be made at frequent intervals. Accumulations of dry dust c[...]

PROBLEM Excessive noise. Motor fails to devet- op full power. NOTE: LOW VOL- TAGE: (Power out- put of motor de- creases rapidly with decrease in voltage at motor terminals. For example, a reduction of 10% in voltage causes a reduction of 19% in maximum power output of which the motor is capable and a reduction of 20% in voltage causes a reduction o[...]

........ i i parts PARTS!LIsT, FOR!; :CRAFTSMAN DUST COLLECTION SYSTEM f MODEL 113.299780 ,'_" E 45 i i i 18[...]

m repaint parts PARTS LiST FOR CRAFTSMAN DUST COLLECTnON SYSTEM MODEL 113.299780 Always order by Part Number - not by Key Number. Item Part No. No. De _rlptton 1 819166 2 819172 3 819187 4 819302 5 819189 6 819191 7 STD833025 8 819192 9 819171 10 STD551125 11 STD840610 12 819183 13 STD551025 14 STD833012 15 819168 16 819198-1 17 124944 18 819184 19[...]

p,- ii, i,,, _'_ SERVICE MODEL NO. 113.299780 Dust Collection System HOW TO ORDER REPAIR PARTS _,l ill i i i ii ,,i ill Sold by SEARS. Part No. SP5373 DUST COLLECTmON SYSTEM Service is available by returning this unit to the nearest Sears Service Center/Department through- out the United States. Model and serial numbers may be found on the Mot[...]