CTX PR711FL инструкция обслуживания

PR711FL User ’s Manual 1 User’s Manual PR711FL[...]

PR711FL User ’s Manual 2 T able of Content s 1. Safety Instructions 3 2. Recommendation for Optimu m Perf ormance 5 3. Introduction 6 4. Installation 7 5. Controls and Adjustments 9 6. T rouble Shooting 14 7. Energy Declaration 18 8. S pecification 19 9. Reference Information 20[...]

PR711FL User ’s Manual 3 Safety Instructions FCC Statement T his equipment has be en tested to comply with the limits for a cl ass B digital device, pursuant to Part 15 of the FCC rules. These limits are desi gned to provide reasonable prote ction against harmful interference in a reside ntial insta llation. This equipment generates, uses and can[...]

PR711FL User ’s Manual 4 2. Do not place the monitor or other heavy objects on the power cord. A damage d power cord can cause fires or elect rical shock. 3. Keep the monitor away from high-capacity tran sformers, ele ctric motors and other strong magnetic fields. 4. Do not connect to any voltage or frequency beyond the range specifie d on the ba[...]

PR711FL User ’s Manual 5 Recommendation for Optimum Performance Y our monitor will provide the best results if you follow these recom mendations: 1. Do not use your monitor against a bright backgr ound or where su nlight or other light sources will shine directly on the screen. 2. Place the monitor just below eye level (10° -15° ) for optimum v[...]

PR711FL User ’s Manual 6 Introduction T he monitor is a multiple frequency high-re solution color monitor for IBM compatible PC's or Macintosh and workstation systems. The moni tor i s equipped with microprocessor based intelligence and multiple frequency scanning ca pability, allowing it to provide maximum compatibility for various system p[...]

PR711FL User ’s Manual 7 Installation Unpacking Y our color monitor package should cont ain the following items: Color monitor with tilt/swivel base (with Signal cable) Power cord User's Guide / Driver CD System Setup 1. Turn off the system and all attached periphe rals. 2. Carefully turn the monitor upside down.[...]

PR711FL User ’s Manual 8 Remove the Tilt/Swivel Base 1. Squeeze and hold the latches. 2. Pull the tilt/swivel base to the rear of the monitor and lift to remove the base. Installing the Tilt/Swivel Base 1. Align the base with the slots on the bottom of the monitor and insert the tilt/swivel base into the slots. 2. Push the tilt/swivel base firmly[...]

PR711FL User ’s Manual 9 Controls and Adjustments O nce installation is complete, refer to this secti on for useful tips on how to use your monitor controls and make adjustments to mat ch your personal preferences. The following indicators, controls and adjustments, inclu ding On-Screen Displays (OSD), are accessi ble from the front of your monit[...]

PR711FL User ’s Manual 10 4. Up " " button To adjust the selected OSD functi on or the cont rast directly. 5. Down " " button To adjust the selected OSD function or the brightn ess directly. 6. " ESC " button To close the OSD manual and to esca pe function. How to Make On-Screen Di splay (OSD) Adjustments O n-Screen [...]

PR711FL User ’s Manual 11 A. Status To display existing timing data of resolution and frequency. B. Picture a. Press " " or " " to select Vertical and Horizontal position, Vertical and Hori zontal size. b. Press " " to proces s. c. Press " " or " " to preferred picture. C. Geometry a. Press "[...]

PR711FL User ’s Manual 12 D. Color a. Press " " or " " to select various white color temperature standard. b. In User item, presses " " to confirm action c olor adjustment. c. Press " " or " " to select Red, Green and Blue then press "Enter" to process. d. Press " " or " &[...]

PR711FL User ’s Manual 13 E-2. Converage a. Press " " or " " to select Horizontal or Vertical convergence adjustment. b. Press " " to proceed. Caution: 1. If moire reduction is overdone, picture quality, i.e. focus and vertical line stability will both be effected. 2. Proper adjustment is recomm ended for not effecti[...]

PR711FL User ’s Manual 14 Confirm the Recall action by pressing the " " or cancel the action by pressing the " ESC ". G. Language Press " " or " " to select the Language for OSD only. (2) Contrast/Brightness: When OSD is off, " " or " " will be adjust contrast or brightness.[...]

PR711FL User ’s Manual 15 Trouble Shooting N otify your supervisor or contac t your service personal when: • Power cords are frayed or damaged. • Liquid is spilled into the monitor. • The monitor does not operate normally whe n operating instructions are observed. • The monitor has been dropped o r the cabinet has been damaged. R eview th[...]

PR711FL User ’s Manual 16 Signal Out of range. Readjust the signal based on spec. Reference "Scan Frequency". Display image is not centered or is too small or too large. Refer to "Controls & Adjustments." You need to adjust "Size" and "Position" of the image. Image is scrolling or is unstable Make sure [...]

PR711FL User ’s Manual 17 Edges of display are curved inward or outward. Refer to "Controls and Adjustments." You need to adjust the "Side Pincushion." No Plug & Play. Verify that the host syste m is Plug & Play compatible. Check to see if Windows i s installed, and the software key for the Data Display Chan nel (DDC) [...]

PR711FL User ’s Manual 18 Black fine vertical lines are visible on the screen. Shock and vibration may cause the apertur e grille misaligned, which results few fine black vertical lines across the screen Degaussing the scre en. Tap lightly (do not hit) the side of the monitor. If above mentioned remedies do not work, please do the following: 1.Di[...]

PR711FL User ’s Manual 19 Energy Declaration T his monitor is equipped with a function for sa ving energy, which supports the VESA Display Power Management Signaling (DPMS) standard. Thi s means that the monitor must be connected to a computer, which also su pports the VESA DPMS standard to fulfill the requirements of the NUTE K specification 803[...]

PR711FL User ’s Manual 20 Specification Color Picture Tube 43.1 cm / 17" (16" viewable screen size) diagonal measurement, 90 degree deflection, FD Trinitron® CRT, anti-glare, anti-refle ction, anti-static, medium short persistence ph osphor, dark bulb AG Pitch 0.24 mm, (at center) Input Signal Analog 0.7V peak to peak separate T TL Pos[...]

PR711FL User ’s Manual 21 Reference Information T his color monitor support s multiple operating platforms such as IBM compatible and Macintosh family computers. This secti on pr ovides you with detailed information on pin assignment of the D-Sub connector a nd the preset timing chart of the prevailing video standards. Connector Pin Assignments M[...]

PR711FL User ’s Manual 22 Preset Timing Chart Note: This monitor is equi pped with a microprocessor which allows the use r to set his own preferred mode(s) beyond those standard mode listed below. To reduce visual tiredness and eyestrain, it is recommended to choose the highest refresh modes available. Resolution Format Horizontal Frequency (KHz)[...]