D-Link DES-3200 инструкция обслуживания

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Swit ch CL I Refer ence Guide[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Swit ch CL I Refer ence Guide Information i n th is d o cument is subje c t to change without no tic e . © 201 1 D- Li nk Corporat ion. A ll righ ts res erved. Repr oduc tion i n a ny ma nner what soe ver witho ut t he writte n pe r missi o n o f D - Link C orporation is s trictly forbidden. [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Swit ch CL I Refer ence Guide Table of Contents I NTRODUCTION ......................................................................................................................................................... 1 USING TH E CON SOLE C L I ..................................................[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de MAC NOTIFICATION COM MAND S ...................................................................................................................... 243 ACCES S AUTH ENTIC ATI O N CONTROL COMM ANDS ....................................................................[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de ERPS COMMANDS .................................................................................................................................................. 476 NETWORK LOAD BALAN CING (NLB) COMM ANDS ...........................................................[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 1 1 I NTRODUCTION The Switch can be m anaged through the Switch’s serial port, Telnet, or th e Web - ba sed mana geme nt age nt. The Co mmand Li ne Interface (CLI) can be used to conf igure and manage the Switch via the serial port or Telnet in terf ace s. Thi s[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 2 The IP address for the Switch must be set before it can be managed with the Web - based m a n ager. The Switch IP address can be automaticall y set using BOOT P or DHCP p rotocols, in whi ch case the actual address assigned to the Switch must be known. The IP ad[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 3 2 U SING THE C ONSOLE CLI The Switch supports a console management interf ace that allo ws the user to connect to the Switch’s management a gent via a seria l port and a terminal or a computer running a terminal emulation program. The console can also be used [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 4 .. ? cable_diag ports clear clear address_binding dhcp_snoop binding_entry ports clear arptable clear counters clear dos_prevention counters clear fdb clear igmp_snooping data_driven_group clear log clear mac_based_access_control auth_mac clear port_security_ent[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 5 DES-3200-28:4#config account Command: config account Next possible completions: <username> DES-3200-28:4#config account Command: config account Next possible completions: <username> DES-3200-28:4# Figure 2 - 4. Using the Up Arrow to Re- enter a Co mm[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 6 DES-3200-28:4#show Command: show Next possible completions: 802.1p 802.1x access_profile account acct_client address_binding arp_spoofing_prevention auth_session_statistics auth_statistics authen authen_enable authen_login authen_policy authorization autoconfig [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 7 3 C O M M AN D S Y N T AX The fol lowing symbols are used to describe how command entries are made and values and arguments are specified in this manual. Not e: All command s are case - sensitiv e. B e s ur e t o d is ab le C a ps L oc k or any other unw ant ed [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 8 { braces} Purpose Encloses an optional va lue or set of option al argum ents. Syntax reset {[conf ig | system ]} {f orce_agree} Descripti on In the f irst part of the abov e s yntax exam ple, users have the option to specif y config or s ystem . It is not nec es[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 9 CTRL+c Stops t he displa y of rem aining pag es when m ultiple pa ges are t o be displa yed. ESC Stops t he disp lay of rem aining pag es whe n multiple pages ar e to be displa yed. n Displa ys the next pa ge. p Displa ys the prev ious page . q Stops the displa [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 10 4 B A SIC S WITC H C OMMA NDS The Ba sic Switc h commands in the Co mmand Line Interface (CLI) are listed (along with the appropriate parameters) in the following table: Command Para meters enable pass word encr yption disable password e ncryptio n create acc o[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 11 enable passw ord encryption Purpose Used to enabl e password encr yption on a us er accou nt. Syntax enable password enc r yptio n Descripti on The us er account c onfigura tion infor mation will b e stored i n the configurat ion file, and can b e applied to th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 12 create account Purpose Used to create us er acc ounts. Syntax create accou nt [adm in | user] <us ernam e 15> Descripti on This comm and is used to c reate user accoun ts that co nsist of a usernam e of 1 to 15 c harac ters and a password of 0 to 15 chara[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 13 config a c c ount Purpose Used to conf igure user ac counts. Syntax config account <usernam e> {encr ypt [pla in_text |sha_1] <pas s word >} Descripti on This comm and is used to c onfigure a us er accou nt tha t has been c reated us ing the create [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 14 show a ccount Purpose Used to displa y user ac counts . Syntax show account Descripti on This comm and is used to di spla y all user acc ounts cre ated on the Switch. Up to eight user ac counts can exist at one tim e. Paramete rs None. Restricti ons Onl y Admin[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 15 show se ssion Purpose Used to displa y a list of current ly logged - i n users. Syntax show session Descripti on This comm and is used to di spla y a list of all t he users that are logged - in at th e time the c omm and is issued. Paramete rs None. Restricti o[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 16 show switch Purpose Used to displa y genera l inform ation about the Switc h. Syntax sho w s witc h Descripti on This comm and is used to di spla y information a bout the Switch. Paramete rs None. Restricti ons None. Exa mple usa ge : To displ ay th e Swit ch?[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 17 show serial_port Purpose Used to displa y the curr ent serial port sett ings. Syntax show serial_ port Descripti on This comm and is used to di spla y the current ser ial port settings . Paramete rs None. Restricti ons None Exa mple usa ge : To display the seri[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 18 config s e ri al_port Purpose Used to conf igure the ser ial por t. Syntax config seria l_port { ba ud_ra te [9600 | 19200 | 3 8400 | 11520 0] | aut o_logout [never | 2_minutes | 5_m inutes | 10 _m inutes | 15_m inutes] } (1 ) Descripti on This comm and is used[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 19 enable cl i paging Purpose Used to pause the scr olling of the console s creen when a comm and displa ys more than one pa ge. Syntax enable clipag ing Descripti on This comm and is used whe n issuing a comm and which c auses th e console sc reen to ra pidl y sc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 20 enable telnet Purpose Used to enabl e comm unication with and m anagem ent of the Switch using the Telnet pr otoco l. Syntax enable telnet { <tcp_por t_num ber 1 - 65535 >} Descripti on This comm and is used to e nable the T elnet pr otocol o n the S witc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 21 telnet Purpose Used to Telnet a nother d evice on the networ k. Syntax telnet <ipad dr> {tcp _port <v alue 0 - 6553 5>} Descripti on This comm and is used to c onnect to a nother d evice’s managem ent through T elnet. Paramete rs <ipad dr> ?[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 22 disable web Purpose Used to disable the HT TP - based m anagem ent sof tware on t he Swit ch . Syntax disable web Descripti on This comm and disables the Web - bas ed managem ent sof tware on the Switch. Paramete rs None. Restricti ons Onl y Administ rat or - l[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 23 DES-3200-28:4#save log Command: save log Saving all log information to NV-RAM...... Done. Success. DES-3200-28:4# To sa ve the S witc h’s t he cur rent c onfi gurat i on a nd lo g t o no n - volatile RAM: DES-3200-28:4#save all Command: save all Saving all co[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 24 reset Purpose Used to reset th e Switch to the f actory def ault setti ngs. Syntax reset {[conf ig | system ]} { f orce_agree} Descripti on This comm and is used to r estore the S witch’s configur ation to the default se ttings as signed f rom the f actor y .[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 25 To r e store all of the Swi tch’s parameters to their default values and have the Sw itch save and reboot: DES-3200-28:4#reset system Command: reset system Are you sure you want to proceed with system reset, save and reboot?(y/n) Load Factory Default Configur[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 26 show c onfig Purpose Used to collec t and dis play all system configur ations in a single CLI comm and. Syntax show config [cur rent_co nfig | config_i n_nvram ] Descripti on This comm and is used to di spla y all system configur ations. T he continuous displa [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 27 config t e rm i nal_line Purpose Used to conf igure the num ber of r ows which can be d ispla yed on a screen. Syntax config terminal_ line [ def au lt | <value 20 - 80 >] Descripti on This comm and is used to c onfigure t he num ber of row s which can be[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 28 enable jumbo_fr ame Purpose Used to enabl e jum bo frame. Syntax enabl e jum bo_fram e Descripti on This comm and is used to c onfigure t he jum bo fram e setting as enable. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue t his c[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 29 show j umbo_fr ame Purpose Used to displa y the curr ent conf iguration of jum bo frame. Syntax show jum bo_fram e Descripti on This comm and is used to di spla y the current co nfigurat ion of the jumbo f rame s etting. Paramete rs None. Restricti ons None. Ex[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 30 5 M ODIFY B AN N E R AN D P ROMP T C O M M AN D S The Modify Bann er and Prompt commands in the Command Line Int erface (CLI) are listed (along w it h the app ropriate parameters) in the f ollowing table: Command Para meters config c omm and_ prom pt [<strin[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 31 config gr eeting _mes s a ge Purpose Used to conf igure the lo gin bann er (greet ing m essage). Syntax config greetin g _mes sage {def ault} Descripti on Users can use th is comm and to m odif y t he log in bann er (greeti ng mes sage). Paramete rs default –[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 32 show greeting_m essage Purpose Used to view t he curren tly conf igured greet ing m essage configured on the S witc h. Syntax show greeting_m ess age Descripti on Th is comm and is used to vie w the current ly conf igured gr eeting mess age on the S witch. Para[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 33 6 S WITCH P ORT C O M M AN D S The Switch Port commands in the Command Line Interface (CL I) are listed (along with the appropriate param eters) in the following table: Command Para meters config ports [<p ortlis t> | a ll] {medium _type [fiber | copper ][...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 34 config por ts Purpose Used to conf igure the S witch’s Et hernet p ort settings . Syntax [<portli st> | all] {m edium_t ype [fiber | cop per]} {spe ed [auto | 10_half | 10_full | 100_ha lf | 100_full | 1000_f ull {[mas ter | slave]}] | flow_c ontrol [ e[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 35 show port s Purpose Used to displa y the current configurat ion of a range of por ts. Syntax show ports { <portlist >} {[desc ription | err _disabled]} Descripti on This comm and is used to di spla y the current co nfigurat ions of a ra nge of ports. No p[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 36 Exa mple usa ge : To displ ay th e config uratio n o f all p o rts on a standalo ne switch, with descrip tion: DES-3200-28:4#show ports description Command: show ports description Port State/ Settings Connection Address MDI Speed/Duplex/FlowCtrl Speed/Duplex/Fl[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 37 7 P ORT S ECURI TY C O M M AN D S The Por t Sec urit y comma nds in the Co m mand Line Interface (CLI) are listed (along with the appropr iate param eters) in the following table: Command Para meters config port_s ecur ity ports [<auth_por tlist> | all] {[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 38 config por t_sec urit y por t s Purpose Used to conf igure port s ecurit y settings. Syntax config port_s ecurit y ports [<auth_ portlist > | all ] { adm in_state [en able | d isable] | max_learn ing_addr <max _lock _no 0 - 64> | lock_addre s s _m o[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 39 delete port_security _entr y Purpose Used to delete a port sec urit y entry by M AC address , port num ber and VLAN ID . Syntax d elete port_sec urity_en try vlan_ name <v lan_nam e 32> mac_addr ess <m acaddr> p ort <auth _port> Descripti on T[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 40 clear port_security _ entr y Purpose Used to clear MAC addr ess entri es learned from a specified por t for the port s ecurit y function. Syntax clear port_sec urit y_entry port s <auth_ portlist> Descripti on This comm and is used to c lear MAC a ddress [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 41 show port _ s e c uri ty Purpose Used to displa y the curr ent port s ecurit y configurat ion. Syntax show port_sec urit y {ports <auth _portlist >} Descripti on This comm and is used to di spla y port securit y inform ation of the Switch’s p orts. T he[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 42 enable por t_securi t y trap_log Purpose Used to enabl e the trap log f or port sec urity. Syntax enable port_sec urit y trap_log Descripti on This comm and, along with t he disab le port_sec urity tr ap_log, w ill enable the s ending of log mess ages to the S [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 43 8 N ETWORK M ANA G EMENT (SNMP ) C O MM ANDS The Switch supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. Users can specify which version of the SN M P use rs want to use t o moni to r and co n tr o l the S wi tc h. T he thr ee ver s[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 44 Command Para meters show snm p host { <ipaddr>} create trus ted_hos t [<ipaddr > | netw ork<net work _address>] delete trust ed_hos t [ipaddr <ipaddr > | network < network _address > | all] show trus ted_hos t enable snm p [authent[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 45 create snmp user Purpose Used to create a new SN MP user a nd adds t he user to an SN MP group that is a lso created b y this com mand. Syntax create snm p user <SNMP _nam e 32> <gro upnam e 32> {encr ypted [b y_pass word auth [md5 <auth _pass wo[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 46 DES-3200- 28:4#create snmp user dlink default encrypted by_password auth md5 knickerbockers priv none Command: create snmp user dlink default encrypted by_password auth md5 knickerbockers priv none Success. DES-3200-28:4# delete snmp user Purpose Used to remove[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 47 show s nmp user Purpose Used to displa y inform ation abo ut each S NMP userna me in the SNMP gro up usernam e tab le. Syntax sh ow snmp user Descripti on This comm and is used to di spla y information a bout eac h SNMP usernam e in the S NMP group us ernam e t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 48 create snmp vie w Purpose Used to assign views to com munity strin gs to lim it whic h MIB objec ts and SNMP m anager c an ac cess. Syntax create snm p view <vie w_nam e 32> <oid> view_t ype [includ ed | excluded] Descripti on This comm and is used [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 49 delete snmp v iew Purpose Used to remove an SNM P view entr y previo usly creat ed on th e Swit ch . Syntax delete snm p view <vie w_nam e 32> [all | <oid>] Descripti on This comm and is used to r emove an SNMP vie w previousl y created on the Sw it[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 50 Exa mple usa ge : To displ ay SNM P view conf i guration: DES-3200-28:4#show snmp view Command: show snmp view Vacm View Table Settings View Name Subtree View Type -------------------- ----------------------- ---------- restricted 1.3.6.1.2.1.1 Included restric[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 51 Exa mple usa ge : To create the SNMP community s tring “dlink”: DES-3200-28:4#create snmp community dlink view ReadView read_write Command: create snmp community dlink view ReadView read_write Success. DES-3200-28:4# delet e s nm p communi t y Purpose Used [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 52 Exa mple usa ge : To d ispla y the cur ren tly e nt ere d SN M P co mmunit y stri ngs: DES-3200-28:4#show snmp community Command: show snmp community SNMP Community Table Community Name View Name Access Right ------------------ ------------------- ------------ [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 53 show s nmp engi neID Purpose Used to displa y the ide ntific ation of the SNMP engine o n the Switc h. Syntax show snm p engineID Descripti on This comm and is used to di spla y the identific ation of the SNMP engine on the Switc h. Paramete rs None. Restricti [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 54 crea t e snm p group Purpose Used to create a new SN MP gro up, or a ta ble that m aps SNM P users t o SNMP vie ws . Syntax create snm p group <gro u pnam e 32> [v1 | v2c | v3 [ no aut h _no pri v | auth_nopr i v | auth_pri v]] {read_ view <vie w_name [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 55 Exa mple usa ge : To create an SNMP group named “sg 1 :” DES-3200-28: 4#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1 Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1 Success. DES-3[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 56 Exa mple usa ge : To d ispla y the cur ren tly co nfi gured SNMP gro up s on t he S wit ch: DES-3200-28:4#show snmp groups Command: show snmp groups Vacm Access Table Settings Group Name : Group3 ReadView Name : ReadView WriteView Name : WriteView Notify View N[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 57 create snmp host Purpose Used to create a recipie nt of SNMP traps ge nerated by the S witch’s SNMP agent . Syntax create snm p [host <ipa ddr>] [v1 | v2c | v3 [noauth _nopr iv | auth_nopr iv | auth_pr iv] <auth_s tring 32 > Descripti on This comm[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 58 delete snmp host SNMP agent . Syntax delete snm p [host <ipad dr>] Descripti on This comm and is used to d elete a rec ipient of SNMP tr aps ge nerated by the S witch’s SN MP age nt. Paramete rs <ipad dr> – The I P address of a rem ote SNMP mana[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 59 create trusted_host Descripti on Th is command is used to c reate a trus ted host. The S witch allo ws users to s pecif y up to ten IP ad dress es that are al lowed to m anage t he Switc h via in - ban d SNM P or Telnet - based m anagement s oftware. T hese IP [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 60 Exa mple usa ge : To delete a trusted h ost with an IP address 10 .48.74.121: DES-3200-28:4#delete trusted_host ipaddr 10.48.74.121 Command: delete trusted_host ipaddr 10.48.74.121 Success. DES-3200-28:4# To delete a trus ted hos t network wit h a netw ork addr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 61 Example Usage: To display the lis t o f trust host s: DES-3200-28:4#show trusted_host Command: show trusted_host Management Stations IP Address/Netmask ----------------------- 10.53.13.94/32 Total Entries: 1 DES-3200-28:4# enable s nm p Purpose Used to enabl e [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 62 disabl e snmp Purpose Used to disable SNMP t rap suppor t on the Switch. Syntax disable snm p [authent icate_traps | link change_traps | tr aps] Descripti on This comm and is used to di sable SN MP trap sup port o n the Sw itch. Paramete rs authent icate_tr aps[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 63 config s nm p li nkchange_tr a ps por ts Purpose Used to conf igure the se nding of link change traps and per port control for sendin g of chan ge traps. Syntax config snm p linkc hange_traps ports [a ll | <portlis t>] [en able | disa ble] Descripti on Th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 64 config snmp sy stem_contact Purpose Used to enter the nam e of a contac t person who is r esponsible for the Switch. Syntax config snm p system _contac t {<sw_cont act>} Descripti on This comm and is used to e nter the nam e and/ or other inform ation to [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 65 con fig snmp system_name Purpose Used to conf igure the nam e for the Switch. Syntax config snm p system _name {<sw_nam e>} Descripti on This comm and is used to c onfigure t he nam e of the Switc h. Paramete rs <s w_name> − A m aximum of 128 char[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 66 disabl e rmon Purpose U sed to disable RMON on t he Switch. Syntax disable rm on Descripti on This comm and is used, in c onjuncti on with the enabl e rm on comm and above, to e nable and disable rem ote monitoring ( RMON) on the Sw itch. Paramete rs None. Rest[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 67 9 S WITCH U TILI TY C O M M AN D S The Switch Utilit y commands in the Command Line Interface (CLI) ar e listed (along wit h the appropriate parameters) in th e following table: Command Para meters dow nload [firm ware_fromT FTP [<ipad dr> | <ip v6addr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 68 dow nloa d Purpose Used to downlo ad and ins tall ne w firm ware or a S witch configurat ion file f rom a TFTP ser ver. Syntax download [fir mware_f romTFT P [<ipaddr >| <ipv6a ddr>] <path_fil ename 64 > image _id <value 1 - 2> | cfg_fro[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 69 DES-3200-28:4#disable authen_policy Command: disable authen_policy Success. DES-3200-28:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 70 config f ir mware Purpose Used to conf igure the fir mware sec tion im age as a bo ot up s ection, or to dele te the fir mware se ction Syntax config firm ware im age_id <value 1 - 2> [ delet e | boot _up] Descripti on This comm and is used to c onfigure [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 71 show f irmware informat ion Purpose Used to displa y the fir mware sec tion inf ormation. Syntax show firm ware inform ation Descripti on This co mmand is used t o displa y the firm ware sec tion inf ormation. Paramete rs None. Restricti ons None Exa mple usa g[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 72 show c onfig Purpose Used to displa y the curr ent or save d version of the co nf iguration sett ings of the switch . Syntax show config [cur rent_co nfig | config_i n_nvram ] Descripti on This comm and is used to di spla y all the conf iguration s ettings th a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 73 Exa mple usa ge : To vi e w the c urr e nt con figur ati o n sett i ngs: DES-3200-28:4#show config current_config Command: show config current_config #------------------------------------------------------------------- # DES-3200-28 Configuration # # Firmware: [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 74 upload Purpose Used to uploa d the curr ent switc h settings or the s witch hist ory log to a TF TP. Syntax upload [cf g_toTFTP | log_toT FTP] [<ipad dr>|<ip v6addr>] <path_fil ename 64 > Descripti on This comm and is used to u pload e ither t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 75 en able aut oc onf i g Purpose Used to activat e the au to conf iguration f unction f or the S witch. T his will lo ad a previous ly saved c onfigur ation f ile for c urrent use. Syntax enable autoconf ig Descripti on W hen autoconfig is enable d on the S witch[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 76 DES-3200-28 Fast Ethernet Switch Command Line Interface Firmware: Build 1.28.005 Copyright(C) 2010 D-Link Corporation. All rights reserved. DES-3200-28:4# DES-3200-28:4# DES-3200-28:4#download cfg_fromTFTP 10.41.44.44 c:cfgsetting.txt Command: download cfg_fr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 77 disabl e autoconfig Purpose Use this to deac tivate a uto conf iguration f rom DHCP. Syntax disable autoconf ig Descripti on This comm and is used to in struct the Switch not to acc ept auto configurat ion instr uction fr om the DHCP serv er. This does not chan[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 78 ping Purpose Used to test th e connec tivity b etween n etwork dev ices. Syntax ping <ipaddr > {times <value 0 - 255>} { size < val u e 1 - 60000 >} {tim eout <sec 1 - 99 >} Descripti on The c ommand is used to send I nternet C ontro l M[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 79 ping6 Purpose Used to diagn ose the I Pv6 net work . Syntax ping6 <ipv6ad dr> {tim es <valu e 1 - 255>| size <v alue 1 - 6000> | timeout < value 1 - 10 >} Descripti on This comm and is used to di agnose the IPv6 net work . Paramete rs &l[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 80 trac eroute Purpose Used to trace th e routed path be tween the S witch an d a dest ination endstatio n. Syntax traceroute < ipaddr> {tt l <val ue 1 - 60>} {p ort <valu e 30000 - 64 900>} {tim eout <sec 1 - 6553 5>} {probe <value 1 - [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 81 config termi nal line Purpose Used to conf igure the num ber of r ows which can be d ispla yed at a screen. Syntax config term inal_line [ default | <value 2 0 - 80>] Descripti on Th is comm and is used to configure t he num ber of rows which c an be disp[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 82 10 N ETWORK M ONITORING C O M M AN D S The Network Monitoring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters ) i n the followin g tab le : Command Para meters show pack et ports <port list > show error ports[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 83 show pa c ket ports Purpose Used to displa y stats a bout pac kets s ent and rec eived b y the Switc h. Syntax show packet ports <port list> Descripti on This comm and is used to di spla y statistics abo ut pack ets sent an d received b y ports specif ie [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 84 show e rror por ts Purpose Used to displa y the error statistic s for a range of ports. Syntax show error p orts <portl ist> Descripti on This comm and is used to di spla y all of the pac ket er ror statistic s collected a nd logge d b y the Switch f or a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 85 show uti l iz ation Purpose Used to displa y real - tim e utili zation stat istics. Syntax show utilizati on [ cpu | dram | flash | ports {<portlis t>}] Descripti on This comm and is used to di spla y the real - tim e utilizat ion statist ics f or the Swi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 86 To display the curr e n t Flash me mory utilizatio n: DES-3200-28:4#show utilization flash Command: show utilization flash FLASH Memory Utilization : Total FLASH : 16,384 KB Used FLASH : 7,371 KB Utilization : 44% CTRL+C ESC q Quit SPACE n Next Page p Previous [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 87 clear counters Purpose Used to clear t he Switc h’s statis tics coun ters. Syntax clear counters {ports <portlis t>} Descripti on This comm and is used to c lear the c ounters used b y the Switch t o com pile st atist ics. Paramete rs <por tlis t>[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 88 show l og Purpose Used to displa y the s witch histor y log. Syntax show log {index <value _list X - Y>} Descripti on This comma nd is used to dis play the c ontents of the Switc h’s history log. Paramete rs index <value_l ist X - Y> − This comm[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 89 disabl e syslog Descripti on This comm and is used to di sable the s ystem log to be s ent to a rem ote host. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue t his com mand. Exa mple usa ge : To disable the s yslog function on th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 90 crea t e s y slog hos t Purpose Used to create a new s yslog hos t. Syntax create syslog host <in dex 1 - 4> {sever it y [inform ational | warnin g | all] | facil ity [loca l0 | local 1 | local2 | local3 | local4 | loca l5 | local 6 | local7] | udp_por t [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 91 crea t e s y slog hos t 0 ker nel mes sages 1 user - le vel m essages 2 m ail system 3 system daem ons 4 secur ity/aut horization mes sa ges 5 m essages gener ated int ernall y by syslo g 6 line pr inter s ubsystem 7 net work news subs ystem 8 UUCP s ubsystem 9[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 92 DES-3200- 28:4#create syslog host 1 ipaddress 10.68.88.1 severity all facility local0 Command: create syslog host 1 ipaddress 10.68.88.1 severity all facility local0 Success. DES-3200-28:4# config s yslog Purpose Used to conf igure the s yslog protoc ol to s en[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 93 Paramete rs Num eric al Fac ilit y Code 0 ker nel mes sages 1 user - le vel m essages 2 m ail system 3 system daem ons 4 secur ity/aut horization mes sages 5 m essages gener ated int ernall y by syslo g 6 line pr inter s ubsystem 7 net work news subs ystem 8 UU[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 94 DES-3200-28:4#config syslog host 1 severity all facility local0 Command: config syslog host all severity all facility local0 Success. DES-3200-28:4# To c onfigur e a s yslog host for a l l hosts : DES-3200-28:4#config syslog host all severity all facility local[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 95 show s yslog host Purpose Used to displa y the s yslog hosts currentl y configur ed on the S witch. Syntax show syslog h ost {<ind ex 1 - 4>} Descripti on This comm and is used to di spla y the syslog hos ts that are curr ently configured on the S witc h.[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 96 config l og_save_t imi ng Purpose Used to conf igure the m ethod of saving lo gs to the Switc h’s Flash m em or y. Syntax config log_sa ve_tim ing [time_i nterval <m in 1 - 65535 > | on_dem and | log_trigger ] Descripti on This comm and is used to c onf[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 97 delete ipif Purpose Used to delete an interf ace. Syntax delete ipif [System] [ip v6addr ess <ipv6net work addr>] Descripti on This comm and is used to d elete an i nterfac e. The S ystem interfac e cannot be delete d. B y using this comm and, an IPv6 a d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 98 disabl e ipif_ipv6_ li nk_local _ a ut o Purpose Us ed to disable the auto c onfigurat ion of a link loc al addres s when no IPv6 ad dress is configur ed. Syntax disable ipif _ipv6_link _local_aut o [S ystem] Descripti on This comm and is used to di sable the a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 99 11 M ULTIPLE S PA NNING T REE P ROTOCOL (MSTP) C OMM ANDS This Sw itch supports three versi ons of the Span ning Tree Protoc ol; 802. 1D STP, 802.1w Rapid STP an d 802.1s MSTP. Mult iple Spanni ng Tree Prot ocol, o r MSTP, is a stan dard defin ed by the IEE E c[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 100 The Mul tiple S panning T ree Prot ocol com mands in t he C ommand Line Interface (CLI) are listed (along with the appropriate parameters) in the f ollowing table: enable st p disable stp config s tp versio n [ms tp | rstp | stp] config s tp {max age <value[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 101 enable stp Purpose Used to globa lly enable STP on the Switch. Syntax enable stp Descripti on This comm and is used to gl oball y enable the Spanning Tr ee Protocol on the Switc h. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 102 config s t p ver sion Purpose Use d to globall y set the ver sion of ST P on th e Switch. Syntax config stp ver sion [m stp | rstp | stp] Descripti on This comm and is used to c hoose the version of the sp anning tr ee to be im plem ented on the Swit ch . Para[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 103 config s t p Purpose Used to set up STP, RST P, and MST P on the S witch. Syntax config stp {m axage < value 6 - 40> | maxhops < value 6 - 40> | hellotim e <value 1 - 2> | forwardd elay <value 4 - 30> | txholdc ou nt <val ue 1 - 10&g[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 104 config s t p por ts Purpose Used to set up STP on the port l evel. Syntax config stp por ts <portl ist> {ex ternalCost [ auto | <value 1 - 200 000 000 > ] | hellotim e <value 1 - 2> |migrate [ yes | no ] |edge [ true | fals e | auto ] | restr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 105 Exa mple usa ge : To conf igure STP wit h path cost aut o, hell otime 2 s econds, migration e nable , and s tate enabl e for port s 1 to 2: DES-3200-28:4#config stp ports 1-2 externalCost auto hellotime 2 migrate yes state enable Command: config stp ports 1-2 [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 106 config stp ins tance_id Purpose Used to add or d elete a n STP inst ance ID. Syntax config stp ins tance_id <value 1 - 8 > [add_v lan | rem ove_vlan] <vidlist> Descripti on This comm and is used to m ap VIDs ( VLAN IDs ) to pre viousl y configured [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 1 07 delete stp instance_id Purpose Used to delete a STP ins tance ID f rom the Switch. Syntax delete stp inst ance_id <value 1 - 8> Descripti on This comm and is used to d elete a pr eviousl y configur ed ST P instance I D from the Switch. Paramete rs <v[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 108 config s t p mst _ c onfig_ i d Purpose Used to update the MSTP conf igurat ion id ent if ic ation. Syntax config stp m st_conf ig_id {revisi on_leve l <int 0 - 6553 5> | nam e <string >} Descripti on This comm and is used to u niquel y identif y t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 109 config s t p mst _ por ts Purpose Used to update the port c onfigurati on for a MST P inst ance. Syntax config stp m st_ports <portlis t> instance_ id <value 0 - 8> {inter nalCos t [auto | <value 1 - 200000000 >] | pr iority <val ue 0 - 24[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 110 show stp Purpose Used to displa y the S witch’s current ST P configura tion. Syntax show stp Descripti on This comm and is used to di spla y the Switch ’s current STP conf iguration . Paramete rs None Restricti ons None. Exa mple usa ge : To d ispla y the [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 111 Status 2 : ST P enabled for RSTP DES-3200-28:4#show stp Command: show stp STP Bridge Global Settings -------------------------- STP Status : Enabled STP Version : RSTP Max Age : 20 Hello Time : 2 Forward Delay : 15 Max Hops : 20 TX Hold Count : 6 Forwarding BP[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 112 show s tp port s Purpose Used to displa y the S witch’s current ST P ports conf igur ation. Syntax show stp ports {<portl ist>} {ins tance <va lue 0 - 8>} Descripti on This comm and is used to di spla y the STP port s ettings for a s pecified p o[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 113 show stp instance Purpose Used to displa y the S witch’s STP instance configura tion Syntax show stp instanc e {<va lue 0 - 8>} Descripti on This comm and is used to di spla y the Switch’s current STP Instanc e Setti ngs and the STP Instance Op erati[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 114 show stp mst_config_id Purpose Used to displa y the MST P conf iguration identif ication. Syntax show stp m st_conf ig_id Descripti on This comm and is used to di spla y the Switch’s current MSTP conf iguration identifi cation. Paramete rs None. Restricti on[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 115 12 F OR WA RDING D AT A B AS E C O MMA NDS The Layer 2 Forwarding Database commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the f ollowing table: Command Para meters create f db <vlan_n am e 32> <mac a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 116 create fdb Purpose Used to create a static entry in th e unicas t MAC addr e ss for warding table (dat abase). Syntax create fdb <v lan_nam e 32> <m acaddr> p ort <port > Descripti on This comm and is used to m ake an entr y in th e Switch’[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 117 config m ul ticast_fdb Purpose Used to conf igure the Switch’s m ulticast M AC addres s f orwarding database. Syntax config m ulticast_fdb < vlan_ name 32> <macaddr > [add | delete] <port list> Descripti on This comm and is used to c onfigu[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 118 DES - 3200 - 28:4#c onfi g fdb agin g_time 300 Comman d: conf i g fdb ag ing_tim e 300 Success. DES - 3200 - 28:4# delete fdb Purpose Used to delete an entr y to the S witch’s f orwardin g databas e. Syntax delete fdb < vlan_nam e 32> <m acaddr> [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 119 clear fdb Purpose Used to clear t he Switc h’s forwar ding data base of all dyn am ica ll y learned MAC addr esses. Syntax clear fdb [vlan <vlan_n am e 32> | port <port> | all] Descripti on This comm and is used to c lear d ynamicall y learned en[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 120 Exa mple usa ge : To display the multicast MAC ad d r ess table: DES-3200-28:4#show multicast_fdb vlan default Command: show multicast_fdb vlan default VLAN Name : default MAC Address : 01-00-5E-00-00-00 Egress Ports : 1-5 Mode : Static Total Entries : 1 DES-3[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 121 Exa mple usa ge : To display unica st M AC addr e ss tab le : DES-3200-28:4#show fdb Command: show fdb Unicast MAC Address Ageing Time = 300 VID VLAN Name MAC Address Port Type ---- ------------------------ ----------------- ---- -------- 1 default 00-00-51-43[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 122 show m ulticas t port_fi ltering_m ode Purpose Used to sho w the multic ast pack et filter ing m ode for ports . Syntax show multicas t port_f iltering_m ode Descripti on This comm and is used to di spla y the current m ulticast packet filtering m ode f or por[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 123 13 P AC K E T S TOR M C ONTR OL C OM MA NDS On a computer network, packet s such as Multicast packets and Broadcast packets continu ally flood the net work a s nor mal procedure. At times, this traffic m ay increase due to a malicious endstation on the network[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 124 config t r affic control Purpose Used to conf igure broa dcast/m ulticast/unicas t pack et stor m control. T he soft ware m echanism is provided to m onit or the traf fic rate in addition t o the h ardware stor m control m echanism previous l y provided. Synta[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 125 To configure tra f fic control and enable broadca st st orm c ontrol for ports 1 to 12: DES-3200- 28:4#config traffic control 1 - 12 broadcast enable action shutdown threshold 64 countdown 10 time_interval 10 Command: config traffic control 1- 12 broadcast ena[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 126 config t r affic control _trap Purpose Used to conf igure traf fic control tr ap. Syntax config traff ic control_tr ap [none | storm _occur red | storm _cleared | both] Descripti on This comm and is used to c onfigure w hether stor m c ontrol notificat ion wil[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 127 14 Q O S C OM M AN D S The Sw itch su pports 802. 1p priorit y qu e uing . The Swi tch has four pr iority queues. These pr iority queues are num bered from 3 (Class 3 ) — t he hi ghest prio rit y queue — to 0 (Class 0) — the lowest pr iority queue. T he [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 128 config ba ndw idth_cont r ol Purpose Used to conf igure band width contr ol on a port b y - port basis. Syntax config band width_contro l [<por tlist>] {rx _rate [n o_lim it | <value 64 - 1024000>] | tx_rate [ no_lim it <valu e 64 - 102400 0>[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 129 show ba ndw i dth_control Purpose Used to displa y the band width con trol tab le. Syntax show bandwidt h_contr ol {<port list>} Descripti on This comm and is used to di spla y the current ban dwidth control configurat ion on t he Switc h, on a port - by[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 130 config s c he dul ing Purpose Used to conf igure the tr affic s che duling mec hanism for each COS queue. Syntax config schedu ling <clas s_id 0 - 3> wei ght < va lue 1 - 55> Descripti on The S witch conta ins four h ardware priorit y queues. I nco[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 131 show s cheduli ng Purpose Used to displa y the cur rently c onfigured tr affic scheduli ng on the S witch. Syntax show scheduli ng Descripti on This comm and is used to di spla y the current tr aff ic scheduling mechanism s in us e on the S witch. Paramete rs [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 132 DES-3200-28:4#config scheduling_mechanism strict Command: config scheduling_mechanism strict Success. DES-3200-28:4# show s cheduli ng_mechanism Purpose Used to displa y the curr ent traf fic schedul ing m echanisms in use on the Switch. Syntax show scheduli n[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 133 config 8 0 2. 1p us er _ pri orit y Purpose Used to map the 802.1p us er prior ity of an incom ing pack et to one of the four har dware queues a vailable on the S witch. Syntax config 802.1p user_pr iority <pri ority 0 - 7> <class_id 0 - 3> Descrip[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 134 show 802.1p user_priorit y Purpose Used to displa y the curr ent m apping betwe en an incom ing pack et’s 802. 1p prior ity value and one of the S witch’s fou r hard ware priorit y queues. Syntax show 802.1p us er_priori ty Descripti on This comm and is us[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 135 config 8 0 2. 1p de f aul t _ pr iorit y Purpose Used to conf igure the 802 .1p d efault pr iority setti ngs on the Switch. If an unt agged pac ket is received b y the Switch, t he priorit y configured with this c omm and will be written to the pack et’s pri[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 136 show 802.1p default_priority Purpose Used to displa y the curr ently conf igured 802.1p pr iority va lue that will be as signed to an inco ming, untag ged pack et bef ore being forwarde d to its d estination. Syntax show 802.1p def au lt_ pr ior it y {<port[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 137 config c os mapping Purpose Used to conf igure the CoS to por t mappi ng method to be use d on the switc h. Syntax config cos m apping por ts [<portl ist> | all] [ none | { ethernet [ 802.1p] | ip [tos | dscp] } ( 1) ] Descripti on This comm and is used [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 138 show c os mappi ng Purpose Used to sho w CoS mappi ng. Syntax show cos m apping {port <po rt list> } Descripti on This comm and is used to di spla y information re garding CoS mapping e nabled por ts and their m apping m ethod. Paramete rs <por tlis t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 139 config c os t os value Purpose Used to map the ToS val ue in the I P header of incom ing pac kets to one of the four hardware q ueues av ai lab le on the Swit c h. Syntax config cos tos value <value 0 - 7> [class < class_id 0 - 3>] Descripti on Thi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 140 config ds c p_ m a pping Purpose Used to map the DSCP value in th e IP head er of inc om ing packet to one of the four hardware queues a vailable o n the S witch. Syntax config dscp_m apping ds cp_valu e <valu e 0 - 63> [cl ass <class_id 0 - 3>] De[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 141 show ds c p_ mapping Purpose Used to sho w DSCP val ue m ap to traff ic class . Syn tax show dscp_m apping { dscp_va lue <valu e 0 - 63>} Descripti on This comm and displays th e inform ation for DSCP m apping to traff ic class. Paramete rs <value 0 -[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 142 15 P ORT M IRROR ING C O MM A NDS The Port Mirroring com mands in the C ommand Line Interface (CLI) are li sted (along w ith the appropriate parameters) in t he following table: Command Para meters config m irror por t <port> { [ add | del ete] sourc e p[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 143 DES-3200-28:4#config mirror port 1 add source ports 2-7 both Command: config mirror port 1 add source ports 2-7 both Success. DES-3200-28:4# Exa mple usa ge : To delete the mirroring ports: DES-3200-28:4#config mirror port 1 delete source ports 2-4 both Comman[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 144 DES-3200-28:4#disable mirror Command: disable mirror Success. DES-3200-28:4# sh ow mi rr or Pur pose Used to s how the c urrent p ort m irroring conf iguratio n on the S witch. Syntax show mirr or Descripti on This comm and displays th e curr ent port m irrori[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 145 16 VLAN C OMMA NDS The VLAN co mmand s in t he Co m mand Line Interface (CLI) are lis ted (along with the appropriate pa rameters) in th e following table: Command Para meters create vla n <vla n_nam e 32> tag <vla nid 1 - 4094 > {advert isem ent} [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 146 DES-3200-28:4#create vlan v1 tag 2 Command: create vlan v1 tag 2 Success. DES-3200-28:4# delete vlan Purpose Used to delete a previous ly conf igured VL AN on the Switch. Syntax delete vlan < vlan_nam e 32> | vla nid <vidl ist> Descripti on This co[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 147 Exa mple usa ge : To add 4 t hroug h 8 as t agged ports to the V LAN v1: DES-3200-28:4#config vlan v1 add tagged 4-8 Command: config vlan v1 add tagged 4-8 Success. DES-3200-28:4# To delete ports from a VLAN: DES-3200-28:4#config vlan v1 delete 6-8 Command: co[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 148 Exa mple usa ge : To delete a V LAN ID on t he Switch: DES-3200-28:4#delete vlan vlanid 5 Command: delete vlan vlanid 5 Success DES-3200-28:4# config vl a n vl ani d Purpose Used to add ad ditional ports to a pr evious ly conf igured VL AN. Syntax config vlan [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 149 enable pvi d a ut o_ass i gn Purpose Used to enabl e auto - assig nm ent of PVID. Syntax enable pvid auto_ass i gn Descripti on This comm and is used to e nable auto - as signm ent of P VID. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 150 Exa mple usa ge : To d ispla y the P VID a uto - a ssi gnme nt state : DES-3200-28:4#show pvid auto_assign Command: show pvid auto_assign PVID Auto-assignment: Enabled DES-3200-28:4# config gvr p Purpose Used to conf igure GVR P on the S witch. Syntax config g[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 151 enable gvr p Purpose Used to enabl e GVRP o n the Switc h. Syntax enable gvrp Descripti on This comm and, along with disable gvrp belo w, is use d to enab le and disable G VRP on the Switc h, witho ut changi ng the G VRP conf iguration on the Sw itch. Paramete[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 152 show vlan displa yed. Restricti ons None. Exa mple usa ge : To display the S witch’ s cur r ent VL AN setti ngs: DES-3200-28:4#show vlan Command: show vlan VID : 1 VLAN Name : default VLAN Type : Static Advertisement : Enabled Member Ports : 1-28 Static Port[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 153 Exa mple usa ge: To display GVRP port status: DES-3200-28:4#show gvrp 1-10 Command: show gvrp 1-10 Global GVRP : Disabled Port PVID Reassigned GVRP Ingress Acceptable Frame Type PVID State Checking ---- ---- ---------- -------- -------- -----------------------[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 154 17 L INK A GGREGA TION C OMM ANDS The Link Aggregat ion co mmands in t he Command Line Interface (CL I) are listed (along wi th the appropriate parameters) in th e following table: Command Para meters create link _aggre gation group_id <value> {t ype [la[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 155 delet e link_aggr egation group_i d Purpose Used to delete a previous ly conf igured l ink aggreg ation grou p. Syntax delete link_aggr ega tio n group_ id <val ue > Descripti on This comm and is used to d elete a pr eviousl y configur ed link aggr egat [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 156 config li nk_aggr egati on algori t hm Syntax config link _aggregati on alg orithm [m ac_sour ce | mac _destination | mac_s ourc e_des t | ip_sour c e | ip_desti nat ion | ip_so ur ce_dest] Descripti on This comm and is used to c onfigure t he part of the pac [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 157 Exa mple usa ge : To di spl ay Link A g gre gat io n co nfi g ura ti on: DES-3200-28:4#show link_aggregation Command: show link_aggregation Link Aggregation Algorithm = MAC-source Group ID : 1 Type: : TRUNK Master Port : Member Port : Active Port : Status : Di[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 158 sh ow la cp_ports Syntax show lacp_p orts {<por tlist>} Descripti on This comm and is used to di spla y the LACP m ode setti ngs as the y are currentl y configur ed. Paramete rs <por tlis t> − Spec ifies a port or r ange of port s to be co nf igu[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 159 18 B A SIC IP C O M M AN D S The Basic IP int erface commands in t he Command Line Interface (CL I ) are listed (along with the appropriate param et ers) in the following table: Command Para meters conf ig ipif [System ] [ { ipad dress <ne twork _address &g[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 160 config i pif Purpose Used to conf igure the S ystem IP interface. Syntax [System ] [ { ipaddress <networ k_addres s> | vlan <vlan_nam e 32> | sta te [ena bl e | disable] }( 1) | boot p | dhcp | dhcp_opt ion12 [ hos tnam e <hostnam e 63> | cle[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 161 Exa mple usa ge : To configure an interface’sIPv4 netw or k address: DES-3200-28F:4# config ipif System ipaddress 10.48.74.122/8 Command: config ipif System ipaddress 10.48.74.122/8 Success. DES-3200-28F:4# To conf igure an int erface’s DHCP option 12 host[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 162 Exa mple usa ge : To display IP inter face settings: DES-3200-28F:4# show ipif Command: show ipif IP Interface Settings Interface Name IP Address Subnet Mask VLAN Name Admin. State Link Status Member Ports IPv6 Link-Local Address DHCP Option12 State DHCP Optio[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 163 enable a ut oc onf i g Purpose Used to acti vate the au to conf iguration f unction f or the S witch. T his will load a previous ly save d conf iguration f ile for cur rent use. Syntax enable autoconf ig Descripti on W hen autoconfig is enable d on the S witch[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 164 Exa mple usa ge : To e nable auto c onfi g urat i o n o n the S wi tch: DES-3200-28:4#disable autoconfig Command: disable autoconfig Success. DES-3200-28:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 165 19 IGMP S NOOPI NG C OM M A NDS The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table: Command Para meters config igm p_snoo ping [vlan_ nam e <vlan_n am e 32> | vlanid &l[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 166 config i gmp_snoopi ng state [enable | disab le] − All ows users to enable or disa ble IGMP snoopin g for the specif ied VLAN. Restricti ons Onl y Administ rat or - le vel user s can issue t his com mand. Exa mple usa ge : To conf igure IGMP sn ooping: DES-3[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 167 config i gmp_snoopi ng que r ier Querier (s ends IG MP quer y pack ets). It the stat e is dis abled, t hen the s witch ca n not pla y the role as a queri er. Note tha t if the La yer 3 rout er connec ted to the switch pro vide onl y the IG MP prox y function b[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 168 config r outer_por ts_ f or bidden Description This c ommand is used to allo w designat ion of a r ange of ports as being not c onnecte d to mul ticast - ena bled rou ters. T his ensures th at the forbid den rout er port wi ll not pr opagate ro uting pack ets [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 169 disabl e igmp_snooping Purpose Used to disable IGMP s nooping on the Switc h. Syntax disable igm p_snoopin g {forwar d_mc router_onl y} Descripti on Th is comm and is used to disable IGMP snoo ping on th e Switch. If forward_m crouter _only is s pecified, the [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 170 Exa mple usa ge : To sho w IGMP sno op i ng: DES-3200-28:4#show igmp_snooping Command: show igmp_snooping IGMP Snooping Global State : Disabled Multicast Router Only : Disabled Data Driven Learning Max Entries : 56 VLAN Name : default Query Interval : 125 Max [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 171 Exa mple usa ge : To d ispla y the ro ut er ports. DES-3200-28:4#show router_ports Command: show router_ports VLAN Name : default Static Router Port : Dynamic Router Port: Forbidden Router Port: Total Entries: 1 DES-3200-28:4# show igm p_ s noopi ng group Purp[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 172 config i gmp_snoopi ng da t a _ dr iven_lear ning Purpose Used to conf igur e the dat a dr iven learn in g of an IG MP snooping group. Synta x config igmp_s nooping d ata_driven _learn ing [ vlan_n am e <vlan_nam e> | vlanid <vidli s t> | all] { ag[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 173 Exa mple usa ge : To c onfigur e IG M P sno opi ng da ta dr iven le a rni ng ’s ma ximu m lea r ned e ntr y value : DES-3200- 28:4# config igmp_snooping data_driven_learning max_learned_entry 1 Command: config igmp_snooping data_driven_learning max_learned_e[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 174 Exa mple usa ge : To displ ay IG MP snooping fast leav e hosts: DES-3200-28:4# show igmp_snooping host Command: show igmp_snooping host VLAN ID Group Port No IGMP Host -------- ----------------- --------- ------------ 1 225.0.1.0 2 198.19.1.2 1 225.0.1.0 2 198[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 175 Exa mple usa ge : To e n able IGMP Access Control for all ports: DES-3200-28:4# config igmp access_authentication ports all state enable Command: config igmp access_authentication ports all state enable Success. DES-3200-28:4# show igmp access_authentication p[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 176 20 DHCP R ELA Y C O M M AN D S The DHCP Relay commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters ) in the following table: Command Para meters config dhc p_rela y {hops <va lue 1 - 16> | t ime <s ec 0 - 6553[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 177 config dhc p_ r ela y add ipif Purpose Used to add an IP desti nation a ddress to t he switc h's DHCP/ BOOT P rela y table. Syntax config dhcp_r elay add ipif [System ] <ipad dr> Descripti on This comm and is used to a dd an IP ad dress as a desti n[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 178 config dhc p_ r ela y option_8 2 stat e Purpose Used to conf igure the st ate of DHCP rela y agent inf ormation o ption 8 2 of the Switch. Syntax config dhcp_r elay opt ion_82 st ate [enabl e | disabl e] Descripti on This comm and is used to c onfigure t he st[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 179 To configure DHCP relay option 82 check: DES-3200-28:4#config dhcp_relay option_82 check enable Command: config dhcp_relay option_82 check enable Success. DES-3200-28:4# config dhc p_ r ela y option_8 2 poli cy Purpose Used to conf igure the re - f orwarding p[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 180 config dhc p_ r ela y option_8 2 re m ot e id Purpose Use d to configure the proc essing of th e DHCP 8 2 remote ID optio n for the DHCP r ela y function. Syntax config dhcp_r elay opt ion_82 rem ote_id [ default | user_def ine <strin g 32>] Descripti on[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 181 Exa mple usa ge : To sho w the D HCP rel a y conf igurat ion: DES-3200-28:4#show dhcp_relay Command: show dhcp_relay DHCP/BOOTP Relay Status : Disabled DHCP/BOOTP Hops Count Limit : 4 DHCP/BOOTP Relay Time Threshold : 0 DHCP Relay Agent Information Option 82 S[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 182 disabl e dhcp_rel ay Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue t his com mand. Exa mple usa ge : To disable DHCP relay: DES-3200-28:4#disable dhcp_relay Command: disable dhcp_relay Success. DES-3200-28:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 183 21 802.1X C OMMA NDS The Switc h imple ment s IEE E 802 .1X P ort - based and Host - bas ed Access Control. This mechanism is in tended to allow only authorized users , or other network devi ces, access to network resources by establishing criteria for each po[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 184 Command Para meters show 802.1x user Each co mmand is l isted , in detail, in the following sectio ns: enable 802.1x Purpose Used to enabl e the 802.1X ser ver on the S witch. Syntax enable 802.1x Descripti on This comm and is used to e nable the 8 02.1X Netwo[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 185 show 802.1x Paramete rs auth_s tate – D isplays th e curr ent authentic ation stat e of the 802.1X s erver. auth_conf iguratio n – Displ ays the c urrent authent ication c onfigurat ion of the 802.1X server. ports <por tlist> − Spec ifies a por t o[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 186 DES-3200-28:4#show 802.1x auth_configuration ports 1 Command: show 802.1x auth_configuration ports 1 802.1X : Enabled Authentication Mode : Port_based Authentication Protocol : Radius_EAP Port Number : 1 Capability : None AdminCrlDir : Both OpenCrlDir : Both P[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 187 To displ ay th e 802.1X aut hen tication stat e for port - bas ed 802.1X: DES-3200-28:4#show 802.1x auth_state Command: show 802.1x auth_state Port Auth PAE State Backend State Port Status ------ -------------- ------------- ------------ 1 ForceAuth Success Au[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 188 Exa mple usa ge : To display the 802.1X authen ticati on sta te for hos t - base d 802.1X: DES-3200-28:4#show 802.1x auth_state Command: show 802.1x auth_state Port Number : 1 Index MAC Address Auth PAE State Backend State Port Status ------ ----------------- [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 189 config 8 0 2. 1x capa bi lit y ports Syntax config 802.1x c apabil ity ports [<portlist > | all] [au thentic ator | no ne] Descripti on This comm and has two cap abilities t hat can be set for each port, authent icator and none. Paramete rs <por tlis [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 190 config 802.1x auth_parameter po r ts Purpose Used to conf igure the 802 .1X Authenticat ion param eters on a range of ports. T he defau lt param eter will retur n all por ts in t he specif ied range to their def ault 80 2.1X sett ings. Syntax config 802.1x a u[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 191 Exa mple usa ge : To conf igure 802.1X aut hen tication param eters for ports 1 to 20: DES-3200-28:4#config 802.1x auth_parameter ports 1–20 direction both Command: config 802.1x auth_parameter ports 1–20 direction both Success. DES-3200-28:4# config 80 2.[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 192 Exa mple usa ge : To initialize t he aut henticatio n state machi ne o f all ports: DES-3200-28:4# config 802.1x init port_based ports all Command: config 802.1x init port_based ports all Success. DES-3200-28:4# config 802.1x reauth Purpose Used to conf igure [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 193 config r adius add Purpose Used to conf igure the se ttings the Switc h will use t o co mmunicate with a RA DIUS server. Syntax config radius add <ser ver_index 1 - 3> [<ser ver_ip> ] key <pas swd 32 > [default | {auth_port <udp_por t_numb[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 194 config r adius delete Purpose Used to delete a previous ly entere d RADIU S server conf iguration. Syntax config radius delete <server_ind ex 1 - 3> Descripti on This comm and is used to d elete a pr eviousl y entered RADIU S server configurat ion. Param[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 195 Exa mple usa ge : To c onfigur e the RADI US se tti ng s: DES-3200-28:4#config radius 1 10.48.74.121 key dlink default Command: config radius 1 10.48.74.121 key dlink default Success. DES-3200-28:4# config radius para meter Purpose Used to conf igure param ete[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 196 Exa mple usa ge : To display R ADIUS settings o n the S witch: DES-3200-28:4#show radius Command: show radius Timeout : 5 seconds Retransmit : 2 Index IP Address Auth-Port Acct-Port Status Key Number Number ----- ------------------ --------- --------- --------[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 197 config 8 0 2. 1x guest _ vl a n por ts Descripti on This comm and is used to c onfigure por ts to be enable d or disab led for th e 802.1X gues t VLAN. Paramete rs <por tlis t> − Spec ify a p ort or r ange of por ts to be conf igured f or the 802 .1X G[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 198 Exa mple usa ge : To conf igure the c onfigurat ions for a previou sly creat ed 802.1X Gue st VLAN : DES-3200-28:4#show 802.1x guest_vlan Command: show 802.1x guest_vlan Guest VLAN Settings ----------------------------------------------------------- Guest VLAN[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 199 show acct_client Purpose Used to displa y the curr ent RADIU S account ing clie nt. Syntax sho w acct_cl ient Descripti on This comm and is used to di spla y the current R ADIUS ac counting client cur rently co nfigured o n the S witch. Paramete rs None. Restr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 200 show a uth_client Purpose Used to displa y the curr ent RADIU S authent ication c lient. Syntax show auth_cl ient Descripti on This comm and is used to di spla y the current R ADIUS authent ication cl ient current ly conf igured on the Switc h. Paramete rs Non[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 201 show a uth_diagnos tics Purpose Used to displa y the curr ent authent ication d iagnost ics. Syntax show auth_dia g nostics { p or ts [< portli st >} Descripti on This comm and is used to di spla y the current aut henticatio n diagnos tics of the Sw itch[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 202 show auth_session_statistics Purpose Used to displa y the curr ent authent ication s ession s tatis tics. Syntax show auth_ses sion_sta tistics {ports <port list | all >} Descripti on This comm and is used to di spla y the current aut henticatio n sess i[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 203 Exa mple usa ge : To display the curr e n t authentic a tio n statistics for p ort 1: DES-3200-28:4#show auth_statistics ports 1 Command: show auth_statistics ports 1 Port number : 1 MAC address: 00-00-07-5D-60-02 EapolFramesRx 6 EapolFramesTx 7 EapolStartFram[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 204 show 802.1x user Syntax sho w 802.1x us er Descripti on This comm and is used to di spla y the 802.1X Port - base d or Host - b ased Network Access control loc al users cur rentl y configure d on the Switch. Paramete rs None. Restricti ons None. Exa mple usa g[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 205 22 A CCESS C ONTROL L IST (ACL) C OMMANDS The Switch implements Access Control L ists that enable the Swi tch to deny network acces s to specific devices or device groups based on IP settings a nd M AC add r ess. The Access Control commands in the Command Line[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 206 Command Para meters create cpu access _profile prof ile_id <value 1 - 3> [eth ernet { vlan | sourc e_mac <macm ask> | des tination _mac <macmask > | 802.1p | et hernet_t ype} (1) | ip { vla n | sourc e_ip_m ask <netm ask> | desti nation[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 207 users can assign an access_id that identifies the rule within the list of r u les. The access_id is an index nu m ber o nly and do es not effect prio r ity with in the profil e _ id. This access_id may be used la te r if user s want to re move the individual r[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 208 create access_profile Protoc ol (I GMP) field . t ype – Spec ifies tha t the Sw itch will ex amine e ach fram e’s IG MP Type fiel d. tcp − Specif ies that th e Swit ch will exam ine each f ram es Transport Control Pr otocol (T CP) field. src_por t_mask &[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 209 To create an access lis t rule: DES-3200- 28:4#create access_profile ip vlan source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp profile_id 101 Command: create access_profile ip vlan source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp per[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 210 config access_profile 0xffff > {mask <hex 0x0 - 0xf fff>} | off set10 <hex 0x0 - 0xff ff> {mask <hex 0x0 - 0x ffff>} | offset11 <hex 0x0 - 0xf fff> {m ask <hex 0x0 - 0x ffff >} } | ipv6 {class <value 0 - 255 > | flo wlabe[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 211 config access_profile t ype – Spec ifies tha t the Sw itch will ex amine e ach fram e’s IG MP T y pe fiel d. tcp − Specif ies that th e Swit ch will exam ine the T ransm ission Contr ol Protoc ol (T CP) field within eac h pack et. src_por t <value 0 -[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 212 config access_profile value set in the pack et, which is us ed to deter mine th e CoS que ue to which pac kets are forwarde d to. Once t his fiel d is specif ied, pac kets ac cepted by the Switch t hat matc h this priorit y are forwar ded to the CoS que ue spe[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 213 DES-3200-28:4#show access_profile Command: show access_profile Access Profile Table ================================================================================ Profile ID: 101 Type: IPv4 Frame Filter - ICMP ================================================[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 214 create cpu access _profile source_ip _mask <netm ask> − Specifies an IP ad dress m ask f or the sourc e IP addres s. destinati on_ip_m ask <netm ask > − Specifies an IP addres s mask for the dest ination IP address . dscp − Spec ifies that th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 215 To create a CPU access profile: DES-3200- 28:4# create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0 destination_[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 216 config c pu a c c e ss_pr ofile 1- 5>] Descripti on This comm and is used to c onfigure a C PU acces s prof ile for CPU I nterf ace Filteri ng and to enter spec ific va lues that w ill be com bined, us ing a lo gical AND o peration al metho d, with mask s e[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 217 config c pu a c c e ss_pr ofile src_por t <value 0 - 655 35> − Spec ifies that t he acces s prof ile will ap ply onl y to pack ets that have this UDP sourc e port i n their head er. dst_port <val ue 0 - 655 35> − Specif ies that the acces s pro[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 218 delete cpu access_p rofile is assign ed to the ac cess p rofile when it is created wit h the cr eate cpu access _profile com mand. Restricti ons Onl y Administ rat o r - level us ers can is sue this c omm and. Exa mple usa ge : To delete the CPU access profile[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 219 DES-3200-28:4#show cpu_access_profile Command: show cpu_access_profile CPU Interface Filtering state: Enabled Access Profile Table ================================================================================ Profile ID: 1 Type: IPv4 Frame Filter - ICMP ===[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 220 disable cp u_interf ace_filt ering Syntax disable cpu_i nterface_f ilteri ng Descripti on This comm and is used, in c onjuncti on with the enabl e cpu_interf ace_f iltering com m and above, to en able and disable CPU interf ace filt ering on th e Switch. Param[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 221 23 T IME R AN G E C O M M AN D S The Tim e Range commands are used in conjunction with the Access Profile commands listed in the previous chapter to determine a starting point and an en ding point, based on day s of the week, when an Access Profile confi gurat[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 222 config t im e _ ra nge delete – Us e this p aram eter to delete a previo usly conf igured tim e range from the s ystem. Restricti ons O n l y A dm inistr ator - leve l users can issue t his com mand. Exa mple usa ge : To conf igure the tim e range time1 t o [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 223 24 S AF E G U AR D E NGINE C OMM ANDS Perio dically, malicious hosts on the network will attac k the Switch b y utilizing packet flo oding (ARP Storm) or o ther methods . These attacks may increase the CPU utilizati on be yon d its capab ility. To alleviate t [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 224 config s a f e gua r d_engine to all t raff ic f lows. Restricti ons Onl y Administ rat or - le vel user s can issue t his com mand. Exa mple usa ge : To configure the saf eguard engine for the Switch: DES-3200-28:4#config safeguard_engine state enable utiliza[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 225 25 T R AF F I C S EGMENT ATION C O MMA NDS Traffic segme ntation allows u sers to further sub - di vide VLANs i nto smaller groups o f ports that will help to reduce traffic on t he VLAN. The VLAN rules take precedence, and then the traffic segmentation rules [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 226 show traffic_segmentation Syntax show traff ic_segm entation {<port list>} Descripti on This comm and is used to di spla y the current tr aff ic segm entation configurat ion on the Switch . Paramete rs <por tlis t> − Spec ifies a port or rang e o[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 227 26 T IME A ND SNTP C OMM A NDS The Sim ple Network Time Protocol (SN T P) (an adaptati on of th e Network Time Protocol (NTP)) comm ands in the Comm and Line Interface (CLI) are list ed (along with the appropriate parameters) in t he following table. Command P[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 228 DES-3200- 28:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll- interval 30 Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Success. DES-3200-28:4# show s ntp Purpose Used to displa y the SNT P inf ormation. Syntax show sntp Desc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 229 disabl e sntp Purpose To disable SNT P server support. Syntax disable sntp Descripti on This comm and is used to di sable SNT P support . SNT P service m ust be separ ately conf igured (s ee config sn tp). Paramete rs None. Restricti ons Onl y Administ rat or [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 230 Exa mple usa ge : To ma n uall y set s yste m time a nd d ate settings: DES-3200-28:4#config time 30jun2003 16:30:30 Command: config time 30jun2003 16:30:30 Success. DES-3200-28:4# config t im e _ z one Purpose Used to deter mine the t ime zone used in or der [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 231 config ds t disable − D isable the D ST s easonal tim e adjustm ent for the Switch. repeatin g − Using rep eating m ode will en able D ST seasonal time adjustm ent. Repe ating m ode requires that the D ST begin ning and e nding date be specif ied u sin g a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 232 DES-3200- 28:4#config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30 Command: config dst repeating s_week 2 s_day tue s_mth 4 s_tim e 15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30 Success. DE[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 233 27 ARP C OMMANDS The ARP commands in the Command Line In terface (CLI) are listed (along w it h the appropriate pa rameters) i n the following table. Command Para meters create arp entr y <ipaddr> <m acaddr> config arpe ntry <i pad dr> <m [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 234 To conf igure a stat ic ARP en try for t he IP addres s 10.48.74 .12 and MAC address 00: 50:BA:00: 07:36: DES-3200-28:4#config arpentry 10.48.74.12 00-50-BA-00-07-36 Command: config arpentry 10.48.74.12 00-50-BA-00-07-36 Success. DES-3200-28:4# delete arpentry[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 2 35 DES-3200-28:4#config arp_aging time 30 Command: config arp_aging time 30 Success. DES-3200-28:4# show a rpentr y Purpose Used to display the ARP table. Syntax show arpentr y {ipif [S ystem] | ipaddress < ipaddr > | static } Descripti on This comm and is[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 236 clea r arp table Descripti on This comm and is used to r emove d ynamic ARP t able entr ies from the Switch ’s ARP t able. Sta tic ARP t able entries are no t affec ted. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue t his co[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 237 28 R OUTIN G T AB L E C O M M AN D S The Routing Table commands in the Co mmand Line Interf ace (CLI) are listed (along with the appropriate parameters) in the following table. Command Para meters create ipr oute [default] < ipaddr> {<m etric 1 - 655 [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 238 delet e iprout e table. Syntax delete iproute [ defaul t] Descripti on This comm and is used to d elete an ex isting default e ntr y from the S witch’s IP r outin g tab le. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue t his[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 239 create ipv6 neighb or_cache ipif Paramete rs <ipif _name> − T he interf ace’s nam e. <ipv6addr > − The addr ess of the neighbor. <mac addr> − The MAC address of the neig hbor. Restricti ons Onl y Administ rat or - le vel user s can is[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 240 show i pv6 nei ghbor_cac he ipif static − The s tatic nei ghbor cache entr y. dy namic − The d ynamic entries. Restricti ons None. Exa mple usa ge : To display the neighbors of the in terface System: DES-3200-28:4#show ipv6 neighbor_cache ipif System all C[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 241 delete ipv6route Purpose Used to delete an IPv6 ro ute. Syntax delete ipv6ro ute [[def ault] [<ipif _nam e 12> <ipv6 addr>| a ll] Descripti on This comm and is used to d elete an IP v6 static r oute. I f the nex t hop is a global ad dress, it is no[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 242 DES-3200-28:4#show ipv6route Command: show ipv6route IPv6 Prefix: ::/0 Protocol: Static Metric: 1 Next Hop : 3FFC::1 IPIF : System Total Entries: 1 DES-3200-28:4# config i pv6 nd ns ipif Purpose Used to conf igure neigh bor s olicitation r elated ar guments . [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 243 29 MAC N OTIFICATION C OMM ANDS The MAC Notification commands in the Command Line Interface (CLI) are listed, in the following table, along with thei r appropriate parameters. Command Para meters enable m ac_notif ication disable m ac_notific ation config m ac[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 244 DES-3200-28:4#disable mac_notification Command: disable mac_notification Success. DES-3200-28:4# config m ac_notif ication Purpose Used to conf igure MAC ad dress notification . Syntax config m ac_notificatio n {inter val <int 1 - 21 474 83 647 > | hi st[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 245 show mac_notification Purpose Used to displa y the S witch’s MAC address table no tification g lobal se ttings. Syntax show mac _notification Descripti on This comm and is used to di spla y the Switch’s MAC ad dress tabl e notificat ion globa l settings . [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 246 DES-3200-28:4#show mac_notification ports Command: show mac_notification ports Port # MAC Address Table Notification State ------ ------------------------------------ 1 Disabled 2 Disabled 3 Disabled 4 Disabled 5 Disabled 6 Disabled 7 Disabled 8 Disabled 9 Dis[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 247 30 A CCESS A UTHENTICATION C ONTROL C O M M AN D S The TACACS / XTACACS / TACACS+ / RADIUS co mmands allows secure access to the Switch using the TACACS / XTACACS / TACACS+ / RADIUS proto co ls. When a user logs in to the S witch or tries to ac cess the admini[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 248 Command Para meters enable authen _po lic y disable auth en _po lic y show authe n_polic y create au then_log in method_lis t_nam e <string 15 > config aut hen_log in [def ault | method _list_n ame <strin g 15>] m ethod {tac acs | x tacacs | tacacs[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 249 enable a ut he n_pol ic y Purpose Used to enabl e system access authentica tion pol icy. Syntax enable authen_po lic y Descripti on This comm and is used to e nable an a dm i nistrator - def ined authent ication pol icy for us ers tr ying to acc ess the Switch[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 250 show a uthen_polic y Purpose Used to displa y the s ystem acc ess authen tication policy s tatus on the Switch. Syntax show authen_p olic y Descripti on This comm and will show th e current status of the ac cess authent ication pol icy on the Switch. Paramete [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 251 config a ut he n_ l ogin methods for us er login. Syntax config authen _login [ default | method_list_ nam e <string 15 >] method {tacacs | xtacacs | tacacs + | radius | server_gr o up <str i ng 15> | local | none} (1) Descripti on This comm and is[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 252 config a ut he n_ l ogin radius − Addin g this param eter will requir e the us er to be a uthentica ted using the RADIUS protocol from a remote RADIU S ser ver. server_gro up <strin g 15> − Addin g this param eter will requ ire the user to be aut hen[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 253 show a uthen_login Purpose Used to displa y a pre viously conf igured user defin ed m ethod list of authent ication m ethods for users log ging on to the Swi tch. Syntax show authen_l ogin [def ault | method_ list_nam e <string 15 > | all] Descripti on T[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 254 create authen_enable method _list_name to gain administr ator pri vile ges on the Switc h, whic h is define d b y the Admin ist rator. A m aximum of eight en able m ethod lists c an be implem ented on the Switch . Paramete rs <st ring 15> − Enter an al[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 255 config a ut he n_ e na bl e TACAC S + serv er hosts of the T ACACS+ ser ver grou p list. radius – A dding this p arameter will requ ire the user to be authent icated usin g the RA DIUS pr otocol fr om the r emote RADIU S server hosts of th e RADIU S server g[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 256 DES-3200- 28:4#config authen_enable default method xtacacs tacacs+ local_enable Command: config authen_enable default method xtacacs tacacs+ local_enable Success. DES-3200-28:4# delete authen_enable me thod_list_name Purpose Used to delete a user - d efined m [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 257 show authen_enable Comm ent – Defines the typ e of Method. User - defined Group ref ers to server gro ups defin ed by th e user. Built - in Gr oup ref ers to the T ACACS, XTACAC S, TACAC S+ and RADIU S secur i t y protoco ls whic h are perm anently set in t [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 258 config a ut he n a ppl icati on enable − Us e this param ete r to configur e an app licatio n for upgr ading a norm al user lev el to adm inistrator privileg es, usin g a previous ly configured m ethod li st. default – Us e this p aram eter to configur e a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 259 create authen serv er _host 1- 255> | retr ansm it < 1 - 255>} Descripti on This comm and is used to c reate an authentic ation ser ver host f or the TACACS/XTACACS/T ACACS+/RADIUS securit y protocols on the Switch. W hen a user attem pts to ac cess t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 260 config a ut he n s erver_ hos t Syntax config authen server_hos t <ipad dr> protoc ol [tacacs | x tacacs | tacacs+ | radius ] {port <int 1 - 655 35> | k ey [<ke y_string 25 4> | none] | tim eout <in t 1 - 255> | retransm it < 1 - 255[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 261 DES-3200- 28:4#config a uthen server_host 10.1.1.121 protocol tacacs+ port 4321 timeout 12 retransmit 4 Command: config authen server_host 10.1.1.121 protocol tacacs+ por t 4321 timeout 12 retransmit 4 Success. DES-3200-28:4# delete authen serv er_host Purpose[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 262 show authen server_host Port – T he virtua l port num ber on t he server host. T he default value is 49. Tim eout − The tim e in seco nds the S witch will wait for t he server host to repl y to an auth enticati on reques t. Retransm it − The val ue in th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 263 config a ut he n s erver_ gr oup Purpose Used to conf igure a user - defined authentic ation ser ver group. Syntax config authen server_gr oup [tac acs | xtacacs | tac acs+ | rad ius | <str ing 15>] [add | delete] s erver_h ost <ipaddr > protoco l [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 264 DES-3200- 28:4# config authen server_group group_1 add server_host 10.1.1.121 protocol tacacs+ Command: config authen server_group group_1 add server_host 10 .1.1.121 protocol tacacs+ Success. DES-3200-28:4# delete authen serv er_group Purpose Used to delete a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 265 DES-3200-28:4#show authen server_group Command: show authen server_group Group Name IP Address Protocol ----------- ----------------------------- ------------ radius --------------------------------------------- tacacs -----------------------------------------[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 266 To set the maxi mum number o f aut hen tication attempt s at 5: DES-3200-28:4#config authen parameter attempt 5 Command: config authen parameter attempt 5 Success. DES-3200-28:4# show authen parameter Purpose Used to displa y the auth enticati on param eters c[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 267 enable admin Restricti ons None. Exa mple usa ge : To enable admi nistra tor p rivil eges o n t he S witc h: DES-3200-28:4#enable admin Password: ****** DES-3200-28:4# config a dm i n local_enabl e Purpose Used to conf igure the loc al enab le pass word for ad[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 268 31 SSH C O M M AN D S The steps required to use th e Secure Shell (SSH) protocol for secure comm unication between a remote PC (the SSH Client) an d the Switch (the SSH S erver), are as follows: Create a user account with admin - level access using the create [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 269 DES-3200-28:4#enable ssh Command: enable ssh Success. DES-3200-28:4# disabl e s sh Purpose Used to disable SSH. Syntax disable ssh Descripti on This comm and is used to di sable SSH on the S witch. Paramete rs None. Restricti ons Onl y Administ rat or - le vel[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 270 DES-3200-28:4#config ssh authmode password enable Command: config ssh authmode password enable Success. DES-3200-28:4# show s sh authm ode Purpose Used to displa y the SSH authent ication m ode settin g. Syntax show ssh aut hmode Descripti on This comm and is [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 271 config ssh server Restricti ons O nl y Adm inistrat or - leve l users can issue t his comm and. Us ag e ex am ple: To c onfigur e the SSH se r ver : DES-3200-28:4# config ssh server maxsession 2 contimeout 300 authfail 2 Command: config ssh server maxsession 2[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 272 config s s h us er hostname <domain_name 32> − Enter an a lphanu meri c strin g of up to 32 characters identifying the remote SSH user. hostn ame_IP <dom ain_name 32> <ipa ddr> − Ente r the ho stna me and the correspon ding IP address of [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 273 config s s h al gor ithm Purpose Used to conf igur e the S SH alg orithm . Syntax config ssh algorithm [3DES | AES128 | AES19 2 | AES256 | arcf our | b lowfish | cast1 28 | twof ish128 | twof is h192 | twofish2 56 | MD5 | SHA1 | RSA | D SA] [enab le | disa ble[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 274 show s sh algor ithm Paramete rs None. Restricti ons None. Usage Example: To display SSH al gorithms cu rrently set o n t he S witc h: DES-3200-28:4#show ssh algorithm Command: show ssh algorithm Encryption Algorithm -------------------------- 3DES : Enabled A[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 275 32 SSL C OMM AN D S Secure Sockets Layer or SSL is a security feature that will pro vide a secure communication path between a host and client thr ough the us e o f authe ntica tio n, di gita l si gnatur es a nd e ncr yptio n. T hese se cur ity f unctio ns are[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 276 enable ssl Purpose To enable the S SL func tion on the Switch. Syntax enable ssl {ci phersuite { RSA_ with_RC4 _128_MD5 | RSA_ with_3D ES_ED E_C BC_SH A | DH E_DS S_with_ 3DES_ EDE_C BC_ SHA | RSA _E XPO RT_ with_RC4 _40_MD5} (1) } Descripti on This comm and i[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 277 disable ssl Purpose To disable th e SSL funct ion on t he S witc h. Syntax disable ssl {c iphersu ite {RSA_ with_RC4 _128_M D5 | RSA_ wit h_ 3D E S_ ED E_CB C_SH A | DHE_D S S_ w ith _3D ES_ED E_C BC_ SH A | RSA_EXPOR T_with_R C4_40_M D5} (1) } Descripti on Th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 278 config s s l c a che time out t ime out Purpose Used to conf igure the S SL cac he timeout. Syntax config ssl cac hetim eout timeout <value 60 - 8 6400> Descripti on This comm and is used to s et the tim e between a new k ey exchange between a client an [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 279 To vi e w the S SL sta tus o n the Switc h: DES-3200-28:4#show ssl Command: show ssl SSL Status Disabled RSA_WITH_RC4_128_MD5 0x0004 Enabled RSA_WITH_3DES_EDE_CBC_SHA 0x000A Enabled DHE_DSS_WITH_3DES_EDE_CBC_SHA 0x0013 Enabled RSA_EXPORT_WITH_RC4_40_MD5 0x0003[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 280 Exa mple usa ge : To download a c e r tificate file and ke y file to the Switc h: DES-3200- 28:4#download ssl certificate 10.53.13.94 certfilename c:/cert.der keyfilename c:/pkey.der Command: download ssl certificate 10.53.13.94 certfilename c :/cert.der keyfi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 281 33 D-L INK S INGLE IP M A N A GEMENT C OMM ANDS Simpl y put, D - Link Single IP Management is a concept that will s tack switches together over Ethernet instead of using stacking p orts or m odules. Sw i tches using D - Link Single IP Management (labeled here [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 282 When a CS becomes a MS, it autom atically becomes a member of the first SNMP community (includes read/w r ite and read only) to which the CS b e long s. The Upgrade to v1. 6 To better improve SIM management, the Switch has been upgraded to version 1.6 in this [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 283 enable sim Purpose Used to enabl e Single IP Manag ement ( SIM) on the S witch. Syntax enable sim Descripti on This comm and is used to e nable SIM globall y on the Switch. SIM features and funct ions wil l not func tion proper ly un less this f unction is ena[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 284 show sim Purpose Used to view t he curren t inform ation regar ding th e SIM gr oup on the Switch. Syntax show sim {[candidates {<candidate _id 1 - 1 00>} | m embers {<m ember _id 1 - 32>} | g roup {comm ander_m ac <mac addr>} | neigh bor]} D[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 285 Exa mple usa ge : To sho w the S I M i nfo rma tion in de t ail: DES-3200-28:4#show sim Command: show sim SIM Version : VER-1.6.07 Firmware Version : 1.28.005 Device Name : MAC Address : 00-63-32-28-01-01 Capabilities : L2 Platform : DES-3200-28 L2 Switch SIM [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 286 To sho w ot he r gro ups i nfor mati o n in su mmar y: DES-3200-28:4#show sim group Command: show sim group SIM Group Name : default ID MAC Address Platform / Hold Firmware Device Name Capability Time Version --- ----------------- --------------=------- ----- [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 287 reconf ig Purpose Used to connect to a m ember sw itch, throug h the com mander switch, using Tel net. Syntax reconfig [m ember_id < value 1 - 32> | exit] Descripti on Thi s comm and is used to r econnect t o a m ember switc h using T elnet and to exi t [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 288 Exa mple usa ge : To add a m ember: DES-3200-28:4#config sim_group add 1 Command: config sim_group add 1 Please wait for ACK !!! SIM Config Success !!! Success. DES-3200-28:4# To delete a mem ber: DES-3200-28:4# config sim_group delete 1 Command: config sim_gr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 289 DES - 3200 - 28:4# c onfi g sim hold_t im e 120 Comman d: conf i g sim hold_tim e 120 Success. DES - 3200 - 28:4# To transfer the Swit ch to be a CaS (can didate): DES-3200-28:4# config sim candidate Command: config sim candidate Success. DES-3200-28:4# To tra[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 290 dow nloa d si m Purpose Used to downlo ad firm ware or c onfigurat ion file to a n indicat ed device. Syntax download sim _ms [firmware_fr om_tftp | c onfiguratio n_fr om_tftp] <ipaddr> <path_fi lenam e> [mem bers <mslist 1 - 32> | al l] Desc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 291 To down load con figuratio n fil es: DES-3200- 28:4#download sim_ms configuration_from_tftp 10.53.13.94 c:/des3200.txt all Command: download sim_ms firmware_from_tftp 10.53.13.94 c:/des3200.txt all This device is updating configuration. Please wait several min[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 292 Exa mple usa ge : To upload configuration fil es to a TFTP server: DES-3200- 28:4#upload sim_ms configuration_to_tftp 10.55.47.1 D:configuration.txt members 1 Command: upload sim_ms configuration 10.55.47.1 D:configuration.txt members 1 This device is upload[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 293 34 SMTP C OMMA NDS SMTP or Simple Mail T rans fer P roto col is a functio n o f the S witch that will send s witch e vents to mail r ecipie nts ba sed on e - mai l addresses entered using the commands below. The Switch is to be configured as a client of SMTP w[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 294 The SMTP comm ands in the Command Line In terface (CLI) are listed (al ong with t he appropriate parameters) in the following table: Command Para meters enable sm tp disable sm tp config s mtp {ser ver <ipaddr > | server_ port <tcp _port_num ber 1 - 6[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 295 DES-3200-28:4#disable smtp Command: disable smtp Success. DES-3200-28:4# config s mtp Purpose Used to conf igure neces sary i nformat ion in set ting up t he Switch as an SMT P client. Syntax config sm tp {server <ipaddr> | s erver_port <tcp_por t_num[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 296 show smtp Purpose Used to view co nfigured param eters for the SMTP f unction on t he Swit ch . Syntax show sm tp Descripti on This comm and is used to di spla y parameter s configur ed for SMT P on the Sw itch, inc luding ser ver inf ormation, m ail rec ipien[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 297 To send a test mail m essage to all configured mail recipients: DES-3200-28:4# smtp send_testmsg Command: smtp send_testmsg Subject: This is a SMTP test. Content: Hello everybody!! Sending mail, please wait… Success. DES-3200-28:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 298 35 C AB L E D I AGNOSTICS C OM MA NDS The Cable Diagnostics commands in the Command Line Interface (CLI) are listed (along with the appropriate param et ers) in the following table. Command P aram eters cable_di ag ports [<p ortlist > | a ll] Each co mma[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 299 DES-3200-28:4#cable_diag ports 25-28 Command: cable_diag ports 25-28 Perform Cable Diagnostics ... Port Type Link Status Test Result Cable Length (M) ---- ------- -------------- -------------------------- ----------------- 25 GE Link Up OK 3 26 GE Link Down No[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 300 36 DHCP L OC AL R ELA Y C OMMA NDS The DHCP Local Relay commands in the Command Lin e Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Para meters config dhc p_local _rela y vlan[<vlan_n am e 32> | vlan i[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 301 To enable the DHCP local relay fun ction: DES-3200-28:4#enable dhcp_local_relay Command: enable dhcp_local_relay Success. DES-3200-28:4# disable dhcp_local_relay Purpose Used to disable the DHC P local re lay func tion on th e Switch. Syntax disable dhcp_loca [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 302 37 G RATUITOUS ARP C OMMANDS The Gratuitous ARP commands in the Command Lin e Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Para meters config gratu itous_ar p send ipif_stat us_up [ena ble | disable ] confi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 303 config gratuitous_arp send du plicate_ip_detected Purpose Used to enabl e or disab le the sen ding of grat uitous A RP reques ts whil e duplicat e IP addr esses are detecte d Syntax config gratuit ous_arp s end dup licate_ip_ detected [ enable | disable] Descr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 304 DES-3200-28:4# config gratuitous_arp learning enable Command: config gratuitous_arp learning enable Success. DES-3200-28:4# config gr atuitous_ a r p_send peri odi call y Purpose Used to conf igure the int erval f or period ical send ing of grat uitous AR P re[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 305 disabl e gratuitous_ a r p Purpose Used to disable the grat uitous ARP trap and log. Syntax disable gratu itous_arp { ipif <ipif_nam e 12>} {tr ap | log} (1) Descripti o n The c ommand is us ed to di sable the gratuito us ARP tr ap and log states. The S [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 306 38 VLAN T RUNKING C OMMA NDS The VLAN Trunking comm ands in the Command Line In terface (CLI) are listed (al ong with the appropriate pa rameters) in th e following table. Command Para meters enable vlan _trunk disable vlan_ tr unk config v lan_trunk ports [&l[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 307 config vl a n_ t r unk Purpose Used to conf igure a p ort as a V LAN trunk port. Syntax config vlan_tr unk ports [<por tlist>|all] | state [e nable|d isable] Descripti on This comm and is used to c onfigure a p ort as a VLAN tr unk port. By default, no n[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 308 To c onfigur e a VL AN T runk p or t i f Por t 6 is LA - 1 member port, por t 7 is L A - 1 master port. DES-3200-28:4# config vlan_trunk ports 6-7 state enable Command: config vlan_trunk ports 6-7 state enable Success. DES-3200-28:4# To conf igure a VLAN Tru n[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 309 show vl a n_ tr unk Purpos e Used to displa y VLAN trunk conf iguration. Syntax show vlan_tru nk Descripti on This comm and is used to di spla y VLAN trunk inform ation. Paramete rs None. Restricti ons None. Exa mple usa ge : To displ ay VLA N T runk inform at[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 310 39 Q- IN -Q C OMMA N DS The Q - in - Q commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table: Co mmand Parameters enable qinq disable qinq show qinq show qinq ports {<port list >} config qi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 311 enable qi nq Purpose This comm and is used to enable t he Q - in - Q m ode. Syntax enable qinq Descrip tion T his comm and is used to enable Q - in - Q mode. W hen Q - in - Q is enabl ed, all ne twork port roles will be NNI port and their outer TPID will be s [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 312 sh ow qinq Paramete rs None. Restricti ons None. Exa mple usa ge : To sho w glo b al Q - in - Q sta tus: DES-3200-28:4#show qinq Command: show qinq QinQ Status: Enabled DES-3200-28:4# show qinq por ts Purpose U s ed t o show global Q - in - Q and port Q - in -[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 313 config qi nq ports disabled . Pa ramete rs <por tlis t> - A range of ports t o configur e. role - Port r ole in Q - in - Q m ode, it ca n be UNI port or N NI port. outer_tpi d - TPID i n the SP - VLAN tag . trust_cvi d - For C- Tag pack ets, trus t C - V[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 314 DES-3200-28:4#create vlan_translation add cvid 1-10 svid 100 Command: create vlan_translation add cvid 1-10 svid 100 Success. DES-3200-28:4# delete vlan_translation cvid Pu rpose Used to de lete VLAN transl ation rules . Syntax delete vlan_t ranslati on cvid [[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 315 Exa mple usa ge : To show VLAN tr a n slation ru le s for C - VID 10 t o C - VID 40: DES-3200-28:4#show vlan_translation cvid 10-40 Command: show vlan_translation cvid 10-40 CVID SVID Action ---- ---- ------ 10 100 Add 20 100 Add 30 200 Add 40 400 Replace Tota[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 316 show bpdu_ t unne l Purpose Used to sho w the BPDU T unnelin g global state, tun nel des tination MAC address, an d port s tate. Syntax show bpdu_tun nel Descripti on This comm and is used to s how the BPD U Tunne ling glob al state, t unnel destinati on MAC a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 317 disabl e bpdu_tunnel Restricti ons Onl y Administ rat or - le vel user s can issue t his com mand. Exa mple usa ge : To d isab l e BPD U tunne ling: DES-3200-28:4#disable bpdu_tunnel Command: disable bpdu_tunnel Success. DES-3200-28:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 318 40 A SYMMETRIC VLAN C OMMA ND S The Asymmetric VLAN commands in the Comm and Line Interface (CLI) are list ed (along with the appropriate param eters) in the following table: Command Para meters enable as ymm etric_vlan disable as ymm etric_vlan show as y m me[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 319 DES-3200-28:4#disable asymmetric_vlan Command: disable asymmetric_vlan Success. DES-3200-28:4# show asymmetric_vlan Purpose Used to view t he as y mm e tric VLAN s tate on the S witch. Syntax show asymm etric_vlan Descripti on This comm and is used to di spla [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 320 41 MLD S NOOPI NG C OMMA NDS The MLD Snooping comm ands in the Command L ine Interface (CLI) are lis ted (along w it h the appropriate param ete r s) i n the following table. Command Para meters config m ld_snoop ing [vlan < vlan_nam e 32> | vl anid <[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 321 DES-3200-28:4#config mld_snooping vlan default state enable Command: config mld_snooping vlan default state enable Success. DES-3200-28:4# config m l d_snooping que r ier Purpose Used to conf igure the timers and the attr ibutes of the MLD snoop ing querier. S[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 322 To configure the MLD sn oopi ng querier quer y interval to 125 seconds and state enable: DES-3200- 28:4#config mld_snooping querier vlan default query_inter val 125 state enable Command: config mld_snooping querier vlan de fault query_interval 1 25 state enabl[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 323 DES-3200-28:4#config mld_snooping mrouter_ports_forbidden default add 1-10 Command: config mld_snooping mrouter_ports_forbidden default add 1-10 Success. DES-3200-28:4# enable ml d_s noopi ng Purpose Used to enabl e MLD sno oping on t he Switc h. Syntax enable[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 324 show m ld_snooping configurat ion on the Switch . Paramete rs <vlan_n am e 32> − The nam e of the VLAN f or wh ich you want to vie w the MLD sno oping c onfigur ation. <vidlis t> - A list of VIDs . If no param eter s pecified, t he s ystem will d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 325 show m ld_snooping group Purpose Used to displa y the curr ent MLD sno oping gr oup conf iguration o n the Swit ch . Syntax sho w m ld _s noop ing gro up {[ vlan <vla n_n am e 32> | vlanid <vidlist>]} Descripti on This comm and is used to di spla y[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 326 show m ld_snooping mrouter _ports configured. forbidde n − Displa ys forbidden r outer p orts tha t have been statica lly configured. If no param eters are specif ied, the s ystem will displ ay all c urrentl y configured r outer ports on t he Switch. Restric[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 327 42 IGMP S NOO PI NG M ULTIC AST VLA N C O M M AN D S The IGMP Snooping Mu lticast VLAN commands in th e Command Line Interface (CL I) are listed (along with th e appropriate parameters) in the f ollowing table: Command Para meters create igm p_snoopi ng multic[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 328 To create an IGMP snooping multi cast VLAN with the VLAN name “mv1” and a VLAN ID of 2: DES-3200-28:4# create igmp_snooping multicast_vlan mv1 2 Command: create igmp_snooping multicast_vlan mv1 2 Success. DES-3200-28:4# config i gmp_snoopi ng m ul ticast _[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 329 To configure an IGMP sn oop multicast VLAN: DES-3200- 28:4# config igmp_snooping multicast_vlan v1 add member_ port 1,3 state enable Command: config igmp_snooping multicast_vlan v1 add member_port 1,3 state enable Success. DES-3200-28:4# config i gmp_snoopi ng[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 330 show i gmp_snoopi ng multi cast_vl an_group Purpose Used to displa y the m ulticast groups conf igured for the specified multic ast VLAN. Syntax show igm p_snooping m ulticas t_vlan_grou p {<vlan_ nam e 32>} Descripti on This comm and is used to di spla [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 331 enable igmp_snoopi ng mul ticast_ vlan Purpose Used to enabl e the m ulticast VL AN funct ion. Syntax enable igm p_snooping m ulticas t_vlan Descripti on This comm and is used to c ontrol the multicas t VLAN f unction. T he ISM VLAN will tak e effec t when IGM[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 332 DES-3200-28:4# show igmp_snooping multicast_vlan Command: show igmp_snooping multicast_vlan Multicast VLAN Global State : Enabled VID : 4001 VLAN Name: 4001 Member Ports : 7-10 Tagged Member Ports : 11-18 Source Ports : 21-26 Untagged Source Ports : 1-6,27 Sta[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 333 43 L IMITED IP M ULTIC AST A DDRESS C O M M AN D S The Limited IP Mult icast Address commands allows the administrator to perm it or d eny acce ss to a port or range of ports by specifying a range of multicast addresses. The limited IP multicast address comman[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 334 config m c a s t _fil t er _ pr ofile Purpose Used to add or d elete a range of multicas t address es to the pr ofile. Syntax config m cast_filter_prof ile [pr ofile_id < value 1 - 24 >| prof ile_nam e <name 1 - 32 > ] {prof ile_nam e <nam e 1 -[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 335 DES-3200-28:4# delete mcast_filter_profile profile_id 3 Command: delete mcast_filter_profile profile_id 3 Success. DES-3200-28:4# d elete mcast_filter_profile Purpose Used to delete a multicas t addres s profil e. Syntax delete mc ast_filter_prof ile pr ofile_[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 336 DES-3200-28:4#show mcast_filter_profile Command: show mcast_filter_profile Mcast Filter Profile: Profile ID Name Multicast Addresses ---------- -------------------------------- ------------------------------- 1 m1 234.1.1.1-234.1.1.10 , 234.2.1.1-234.2.1.100 P[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 337 show limited_multicast_addr Syntax show lim ited_multicas t_addr ports {<por tlist>} Descripti on This comm and is used to di spla y the multicas t filter pr ofiles bou nd to ports. Paramete rs <por tlis t> - A port or r ange of ports on which the [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 338 DES-3200-28:4#config max_mcast_group ports 1,3 max_group 100 Command: config max_mcast_group ports 1,3 max_group 100 Success. DES-3200-28:4# show max_mcast_group Purpose Used to displa y the m aximum number of multicast gr oups tha t a port can join. Syntax sh[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 339 44 LLDP C OMMANDS The LLDP commands in the Command Line Int erface (CLI) are listed (along with the appropriate parameters) in the following table: Command Para meters enable lldp disable lldp config l ldp mess age_tx_interv al <sec 5 - 32768 > config l [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 340 enable lldp Purpose Used to enable LLDP operatio ns on the Switc h. Syntax enable lldp Descripti on This comm and is used for global contr ol of the LLDP func tion. Wh en this f unction is e nabled, t he S witch can star t to tr ansm it LLDP pack ets and recei[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 341 config lldp messa ge_tx_interval Purpose Used to chang e the pac ket trans mis sion interva l. Syntax config lldp m essage_tx _interva l <sec 5 - 327 68> Descripti on This comm and is used to c ontrol how often ac tive por ts retr ansm it advertisem ents[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 342 config ll dp tx_dela y Purpose Used to chang e the m inimum time ( delay - interva l) of any LLD P port. It will dela y advertis ing succe ssive LLD P advert isem ents due to a change in LLDP MI B content. The T x delay def ines the m inimum interval between t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 343 config ll dp notificat i on_interval Purpose Used to conf igure the tim er of the notific ation int erval u sed to se nd notificat ions to conf igured SNMP tra p receiver( s). Synta x config lldp not ification_ interva l <sec 5 - 36 00> Descripti on Glob[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 344 config ll dp ports admin_ st a t us Purpose Used to conf igure per - por t transm it and rec eive modes . Syntax config lldp por ts [<port list>|all] admin_stat us [tx_o nly | rx_onl y | tx_and_rx | disa ble] Descripti on Thes e options en able the Switc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 345 DES-3200-28:4# config lldp ports 1-2 mgt_addr ipv4 192.168.254.10 enable Command: config lldp ports 1-2 mgt_addr ipv4 192.168.254.10 enable Success DES-3200-28:4# config ll dp ports basi c_tvls Purpose Used to conf igure an ind ividua l port or gro up of ports[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 346 config ll dp ports dot1_ t l v_pvid from outbound LLD P adver tisem ents. Syntax config lldp por ts [<port list>|all] dot1_tl v_pvid [ena ble | disab le] Descripti on This TLV optiona l data t ype determ ines whether the I EEE 802 . 1 organi zationall y [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 347 DES-3200-28:4# config lldp ports all dot1_tlv_pvid enable Command: config lldp ports all dot1_tlv_pvid enable Success. DES-3200-28:4# config ll dp ports dot1_ t l v_vlan_name Purpose Used to conf igure an ind ividua l port or gro up of ports to exc lude one or[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 348 config ll dp ports dot1_ t l v_protocol _ ide nt i ty the corres ponding Local S ystem 's Protocol Iden tit y instance will be transm itted on the port. The Pr otocol Identit y TLV pro vides a wa y for stations to advertis e protoc ols that ar e im portan[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 349 config ll dp ports dot3_ t l vs Restricti ons Onl y Administ rat or - le vel user s can issue t his com ma nd. Exa mple usa ge To conf igure the MAC /PHY conf iguration / status TLV f ro m the outboun d LLDP advert isement s for all ports: DES-3200- 28:4#confi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 350 DES-3200-28:4# show lldp Command: show lldp LLDP system information Chassis Id Subtype : MAC Address Chassis Id : 00-15-E9-41-5A-A7 System Name : D-Link System Description : Fast Ethernet Switch System Capabilities : Repeater, Bridge, LLDP Configurations LLDP [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 351 DES-3200-28:4# show lldp ports 1 Command: show lldp ports 1 Port ID : 1 --------------------------------------------------------------------- Admin Status : TX_and_RX Notification Status : Disable Advertised TLVs Option : Port Description Disable System Name D[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 352 DES-3200-28:4# show lldp local_ports 1 mode detailed Command: show lldp local_ports 1 mode detailed Port ID : 1 -------------------------------------------------------------------- Port ID Subtype : Local Port ID : 1/1 Port Description : RMON Port 1 on Unit 1 [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 353 DES-3200-28:4# show lldp local_ports 1 mode brief Command: show lldp local_ports 1 mode brief Port ID : 1 --------------------------------------------------------- Port ID Subtype : Local Port ID : 1/1 Port Description : RMON Port 1 on Unit 1 DES-3200-28:4# sh[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 354 DES-3200-28:4# show lldp remote_ports 1-2 brief Command: show lldp remote_ports 1-2 brief Port ID: 1 ----------------------------------------------------------- Remote Entities Count : 3 Entity 1 Chassis ID Subtype : MAC Address Chassis ID : 00-01-02-03-04-01 [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 355 To display re mote tab le e ntries in no r mal mode: DES-3200-28:4# show lldp remote_ports ports 1 normal Command: show lldp remote_ports ports 1 normal Port ID : 1 ----------------------------------------------------------- Remote Entities Count : 2 Entity 1 [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 356 To display re mote tab le e ntries in deta ile d mode:[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 357 DES-3200-28:4# show lldp remote_ports 1 mode detailed Command: show lldp remote_ports 1 mode detailed Port ID : 1 ---------------------------------------------------------------------- Remote Entities count : 1 Entity 1 Chassis Id Subtype : MAC Address Chassis[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 358 (None.) DES-3200-28:4# show ll dp sta tistics Purpose Used to displa y the s ystem LLDP statistic s inform ation. Syntax show lldp statisti cs Descripti on Th is c omm and is used to displa y an overv iew of nei ghbor det ection activit y on the Sw itch. Param[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 359 DES-3200-28:4# show lldp statistics ports 1 Command: show lldp statistics ports 1 Port ID: 1 ----------------------------------------------------------- lldpStatsTxPortFramesTotal : 27 lldpStatsRxPortFramesDiscardedTotal : 0 lldpStatsRxPortFramesErrors : 0 lld[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 360 45 D O S P REVENTION C O M M AN D S The DoS Prevention commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table: Command Para meters config dos _preven t ion dos_t ype [ {land_at tack | bl at_attack[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 361 config dos _ pr evention dos _t ype Purpose This comm and is used to discar d the L3 contr ol pac kets sent to CPU from specific ports. Syntax config dos_pr evention dos_t ype [ {land_att ack | blat_attack | smurf _attack | tcp _null_sc an | tcp_xm asc an | tc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 362 enable dos _ pr evention tr ap_log drop. Paramete rs None. Restricti ons Onl y Administ rat o r - level us ers can is sue this c omm and. Exa mple usa ge To enable a DoS prevention t rap/log: DES-3200-28:4# enable dos_prevention trap_log Command: enable dos_pr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 3 63 show dos _ pre ven t i on Purpose Used to displa y DoS pr eventio n inform ation. Syntax show dos_pre vention { land_attac k | blat_attack | sm urf_attack | tcp_null _sc an | tcp_xm asc an | tcp_synfin | tcp_s yn_s rc por t_l ess _10 24 } Descripti on This co[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 364 To displ ay D oS prevent ion inform ation for La nd Atta ck: DES-3200-28:4# show dos_prevention land_attack Command: show dos_prevention land_attack DoS Type: Land Attack State: Enabled Action: Mirror Port: 7 Priority: 5 Rx Rate(Kbit/sec): 1024 Frame Counts: 1[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 365 Exa mple usa ge To clear all counters of the prevention of each DoS attack: DES-3200-28:4# clear dos_prevention counters Command: clear dos_prevention counters Success. DES-3200-28:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 366 46 IP - MAC -P ORT B INDING C O M M AN D S The IP ne twork la yer use s a f our - byte addr ess. The Etherne t link layer uses a six - b y te MAC address . Binding th ese two address types together a llows the trans m i ss ion o f data between the la y ers. Th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 367 create address_bind ing ip_mac ipaddress Syntax create addres s_binding ip_m ac ipaddres s <ipad dr> mac _address <mac addr> {ports [ <portlist > | all]} Descripti on This comm and is used to c reate an I P - MAC - port bindin g entr y. Param[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 368 Exa mple usa ge : To c onfigur e ad dre s s b indi n g o n t he Swi tch: DES-3200- 28:4#config address_binding ip_mac ipaddress 10.1.1.3 mac_address 00- 00-00-00-00-05 Command: config address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00- 00-00-00-05 Suc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 369 DES-3200-28:4#config address_binding ip_mac ports 2 state enable Command: config address_binding ip_mac ports 2 state enable Success. DES-3200-28:4# show a ddress_ binding Purpose Used to displa y IP - MAC - po rt bindin g entries. Syntax show address _binding[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 370 DES-3200-28:4#show address_binding ip_mac all Command: show address_binding ip_mac all IP Address MAC Address Mode ACL Status Ports --------------- ----------------- --------------- --------- ---------- 10.1.1.1 00-00-00-00-00-11 Static Active 1,3,5,7,8 10.1.1[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 371 delet e a ddre s s_ bindi ng Purpose Used to delete IP - MAC - port bi nding entr ies. Syntax delete add ress_b inding [ ip_m ac [ipaddress <ipaddr> { mac_addres s <mac addr>} | all] | block ed [all | vlan_nam e <vlan_nam e> mac_addr ess <[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 372 enable a ddr ess_binding tr ap_log Purpose Used to enabl e the trap log f or the IP - MAC - port b inding f unction. Syntax enable addres s_bindi ng trap_log Descripti on This comm and, along with t he disab le address _binding trap_log will enable and disabl [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 373 show a ddress_ binding dhcp_s noop Purpose To show address bindin g entries c reated b y DHCP pa cket. Syntax show address _binding dhcp_snoo p {[m ax_entr y {ports <por tlist>} | binding_e ntry {port <port>}] } Descripti on This comm and is used t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 374 To displ ay a ddress bi nding DHCP snoopi ng maxim um entry: DES-3200-28:4#show address_binding dhcp_snoop max_entry Command: show address_binding dhcp_snoop max_entry Port Max entry ---- --------- 1 5 2 5 3 5 4 5 5 5 6 5 7 5 8 5 9 5 10 5 11 5 12 5 13 5 14 5 1[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 375 Exa mple usa ge To enabl e address bindin g DHCP snoopin g: DES-3200-28:4#enable address_binding dhcp_snoop Command: enable address_binding dhcp_snoop Success. DES-3200-28:4# disabl e address _bindi ng dhcp_snoo p Purpose Used to disable the ad dress bindin g [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 376 config a ddr ess_binding dhcp_ s noo p max_e nt r y the spec ified ports . Syntax config addres s_binding dhcp_s noop m ax_entr y ports [<port list> | all] lim it [<value 1 - 10 > | no_lim it] Descripti on This comm and is used to s pecif y the max[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 377 enable a ddr ess_binding ar p_inspe c ti on Purpose Used to enabl e ARP insp ection. Syntax enable address _bin ding ar p_i ns pecti on Descripti on This comm and is used to f ilter AR P pack ets which ha ve unauth orized sender M AC, IP addr ess, a nd ingress[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 378 47 L OOPB ACK D ETECTI ON C O M M AN D S The Loopback Detection commands in the Command Line Interface (CL I) are listed (along with the appropriate parameters) in th e following table: Command Para meters config lo opdetect { recover_t imer [ 0 | <value 60[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 379 config l oopdetect Purpose Used to conf igure the lo opback detection f unction on the S witch. Syntax config loopdet ect { r ecover_tim er [ 0 | < value 60 - 1000 000> ] | interval < value 1 - 3 2767> | m ode [ port - base d | vlan - bas ed ] } (1[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 380 config loopdete ct ports Purpose Used to conf igure the lo opback detection f unction f or the port on the Switch. Syntax config loopdet ect ports [ <port list> | all ] state [ en able | disable ] Descripti on This comm and is used to s et up the lo opba[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 381 enable loopdetect Purpose Used to globa lly enable the loop - det ect f unction on the Switch. Syntax enable loopdetect Descripti on This comm and is used to al low the loo p detecti on funct ion to be g loball y enabled on the S witch. The def ault value is d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 382 show l oopdetect Purpose Used to displa y the S witch’s current loopb ack detection c onfiguratio n. Syntax show loopdetec t Descripti on This comm and is used to di spla y the Switch’s current loopbac k detection configur ation. Paramete rs None. Restrict[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 383 show l oopdetect ports Purpose Used to displa y the loo pback detection conf igurati on per port on th e Switch. Syntax show loopdetect ports [ <po rtlis t> | all ] Descripti on This comm and will displa y the Switch ’s curr ent per - por t loop - det [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 384 config loopdete ct tra p Purpose Used to conf igure loopb ack detect ion traps . Syntax config loopdet ect trap [ none | loop_detect ed | loop _cleared | both ] Descripti on This comm and is used to s pecif y the trap m odes f or loop detecti on. Paramete rs n[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 385 48 P ROTOC OL VLAN C O M M AN D S The Protocol VLAN commands in the Command Line Interface (CLI) are lis ted (along with the appropriate parameters) in the following table: Command Para meters create dot1v_pr otocol_gr oup group _id <int 1 - 16> {gro up_[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 386 crea t e dot1 v_pr ot oc ol _group Purpose Used to create a protoc ol group f or the pr otocol VLAN f unction. Syntax crea te dot1 v_protocol _group gr oup_id <int 1 - 16> { group_nam e <nam e 32>} Descripti on This comm and is used to c reate a pr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 387 Exa mple usa ge : To add a pr otocol IPv6 t o prot ocol grou p 1: DES-3200- 28:4#config dot1v_protocol_group group_id 1 add protocol Ethernet_2 0x86DD Command: config dot1v_protocol_group group_id 1 add protocol Ethernet_2 0x86DD The protocol value configured [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 388 show dot 1 v_pr otocol_ gr oup Purpose Used to displa y the pro tocols def ined in a protoco l group. Syntax show dot1v_pro tocol_gr oup {[ group_id <int 1 - 16> | group_ nam e <name 32 >]} Descri ption T his comm and is used to di spla y the proto[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 389 config por t dot1v ports Purpose Used to assign the VLAN f or untagg ed pack ets that in gress f rom the portlist bas ed on th e protoc ol group co nfigure d. Syntax config port dot 1v ports [all] [add protoco l_grou p [grou p_id <int 1 - 1 6 > | group_ [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 390 show port dot 1 v P urpose Used to display the VLAN to be ass ociate d with unt ag ged pack ets ingressed from a port based on the protoc ol gro up. Syntax show port dot 1v {ports < portlist > } Descripti on This comm and is used to di spla y the VLAN to[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 391 49 MAC - BASED VLAN C OMMA N DS The MAC - based VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in t he following table: Command Para meters create m ac_based_ vlan m ac_addres s <mac addr> vlan <v[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 392 create mac_based_vlan Purpose Used to create a static MAC - based VLAN entr y. Syntax create mac _based_vl an mac_addr ess <m acaddr> vla n <vlan_nam e 32> Descripti on This comm and is used to c reate a stat ic MAC - based V LAN entr y. W hen a st[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 393 show mac_based_vlan Purpose Used to displa y a static m ac - based vlan en try. Syntax show mac _based_vlan { mac <macaddr > | vlan <vl an_nam e 32>} Descripti on This comm and is used to di spla y a static MAC - B ased VL AN entr y. Paramete rs m [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 394 50 F LOW M ETER C O M M AN D S The Flow Meter commands in the C ommand Line Interface (CLI) are listed (along wi th the appropr iate param et ers) in the following table: Command Para meters config f low_meter prof ile_id <value 1 - 512 > access_i d <[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 395 config f l ow_meter prof il e _i d Purpose Used to conf igure pack et flo w - based m etering bas ed on an ac cess pr ofile and rule. Syntax config flo w_meter prof ile_id <val ue 1 - 512> ac ces s _id < acc ess_id >[[ r ate <valu e 64 - 1024000[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 396 show flow_meter Purpose Used to displa y the flo w - based m etering c onfigurat ion. Syntax show flow_m eter {prof ile_id <val ue 1 - 512> {ac cess_i d <acces s_id>}} Descripti on This comm and displays th e flow m eter c onfiguration. Paramete rs[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 397 51 MAC - BASED A CCESS C ONTROL C O M M AN D S The MAC - based Access Control comm ands in the Command Lin e Interface (CLI) a re listed (alo ng with the appropria te parameters) in the f ollowing table: Command Para meters enable m ac_based _access _control d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 398 enable mac_based _access_control Purpose Used to enabl e MAC - base d access control. Syntax enable mac_b ased_ac cess_contro l Desc ription This c ommand enab les MA C - based ac cess c ontrol on t he Switch. By default this i s not enabled. Paramete rs None.[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 399 config mac_based_access_contro l pass w ord Purpose Used to conf igure the pas sword of the MAC - based ac cess control. Syntax config m ac_based_acc ess_contr ol pass word <pass wd 16> Descripti on This comm and will set the passwor d that wil l be used[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 400 config mac_based_access_contro l aut h_failover Purpose Used to conf igure MAC - based acc ess contr ol authent ication failover. Syntax config m ac_based_acc ess_contr ol auth_f ailover [ enable | disable] Descripti on W hen the authentic ation f ailover is d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 401 config mac_based_access_contro l ports Purpose Used to conf igure the par am eters of the M AC - base d acces s control. Syntax config m ac_based_acc ess_contr ol ports [ <portlis t> | all] {sta te [ena ble | disa ble] | mode [port_bas ed | host_b ased] [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 402 create mac_based_access_control guest_vl anid <vla nid 1 - 409 4>] Descripti on This comm and is used to a ssign th e guest V LAN. Paramete rs guest_ vlan – Spec ifies t he nam e of the guest VLAN. guest_vl anid – Spec ifies th e VLAN ID of the gu es[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 403 clear mac_based_access_control au th_mac port) . T he port (or the user) will retur n to un - au thentic ated state. All the timer s assoc iated with the port (or th e user) will be res et. Paramete rs ports – To specif y the por t range to delete MA Cs on t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 404 config mac_based_access_contro l_local mac vlanid - S pecify the t arget V LAN by VID . W hen the host is authori zed, it is assigne d to this VLAN if th e target VLAN ex ists. clear_vl an - Clear t arget VL AN inform ation for s pecific hosts f rom the loca l[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 405 show mac_based_access_control Descripti on This comm and is used to di spla y the MAC - base d acce ss control s etting. Paramete rs ports - Di splay the MA C - ba sed acces s control port state. Restricti ons None. Exa mple usa ge : To display MA C - based ac[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 406 show mac_based_access_control_local vlanid – D ispla y MAC - bas ed acc ess contr ol local d atabases by the VLAN ID . Restricti ons None. Exa mple usa ge To display MA C - based access control local databases: DES-3200-28:4#show mac_based_access_control_loc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 407 To display MA C - based access control local databases by V LAN: DES-3200-28:4#show mac_based_access_control_local vlan default Command: show mac_based_access_control_local vlan default MAC Address VLAN Name VID ----------------- ---------------------- ------ [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 408 config mac_based_access_control max_users Descripti on Th is command is used to s pecify the m axim um user lim it per counter . Paramete rs no_ lim it – Specif y to not lim it the s ystem m aximum us er num ber. <value 1 - 128> – Specif y to set the[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 409 config mac_based_access_contro l authorization attributes Purpose Used to enabl e or disab le local or RADIU S authori zation to accept an author ized conf iguration. Syntax config m ac_based_acc ess_contr ol authori zation a ttributes { radiu s [ enable | dis[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 410 enable a ut hori zation att ri butes Purpose The enable auth orizat ion com mand globa lly enables the author ization f or attr ibutes f unction. Syntax enable author ization attr ibutes Descripti on Used to enable au thori zation attri butes. W hen enabl ed, [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 411 sho w a uthoriza tion Purpose Used to displa y author ization for attributes s tatus. Syntax show author ization Descripti on Used th is to vie w authori zation for att ributes status. Paramete rs None. Restricti ons None. Exa mple usa ge : Thi s e xample disp[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 412 config mac_based_access_contro l log state Purpose Used to enabl e or disab le gener ating of MAC - based acc ess contr ol logs. Syntax config m ac_based_acc ess_contr ol log stat e [enable | disa ble] Descripti on W hen MAC - based acc ess control lo g state [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 413 52 ARP S POOFING P REVENTION C O M M AN D S The ARP Spoofing Prevention commands in the Command Line Interface (CLI) are listed (along wit h the appropriate parameters) in the followi ng table : Command Para meters config arp_spo ofing_prev ention [ add gat e [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 414 config a r p_spoofing_pr evention Purpose Used to conf igure the pr evention of ARP sp oofing att ack s. Syntax config arp_sp oofing_pr evention [a dd gate way_ip <ipaddr> gatewa y_mac <m acaddr> por ts [<portl ist>|all] | delete gatewa y_ip [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 415 show a rp_spoofi ng_preve ntion Purpose Used to displa y ARP sp oofing pre vention entries . Syntax show arp_spoof ing_pre vention Descripti on This comm and is used to di spla y ARP spoofing preven tion entries . Paramete rs None. Restricti ons None. Exa mple[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 416 53 T ECHNIC A L S UPPORT C O M M AN D S The Technical Su pport commands in the Command Lin e Interface (CLI) are listed (alon g with the appropriate param eters) in the following table: Command Para meters show tech _suppor t upload tech_sup port_toT FTP <i[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 417 DES-3200-28:4#show tech_support Command: show tech_support DES-3200-28 Fast Ethernet Switch Technical Information Report ============================================================================= [CPU Utilization 8292070ms] CPU Utilization : ---------------[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 418 upload te c h_s uppor t_toTFTP Purpose Used to uploa d inform ation f or assistanc e from technical sup port. Syntax upload tech_su pport_toT FT P <ipaddr> <pat h_filenam e 64 > Descripti on This comm and is used to u pload inf orm ation for ass is[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 419 54 C O M M AN D H IS TORY C OMMANDS The Command History commands in the Co mm and Line Interface (CLI) are listed (along with the appropriate parameters) in the following table: Command Para meters ? dir config c omm and_history <v alue 1 - 40> show com [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 420 DES-3200-28:4#? .. ? cable_diag ports clear clear address_binding dhcp_snoop binding_entry ports clear arptable clear counters clear dos_prevention counters clear fdb clear igmp_snooping data_driven_group clear log Clear mac_based_access_control auth_mac clear[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 421 dir Purpose Used to displa y all comm ands in t he Com mand Line Interf ace (CLI). Sy nta x dir Descripti on This comm and is used to di spla y all of the com mands available through th e Comm and Line Interface ( CLI). Paramete rs None. Restricti ons None. Ex[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 422 config c om m a nd_hi st or y Purpose Used to conf igure the com m and histor y. Syntax config comm and_histor y <valu e 1 - 40> Descripti on This comm and is used to c onfigure t he comm and histor y. Paramete rs <value 1 - 4 0> − T he number of[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 423 55 C ONNECTIVITY F AULT M A N AGEMENT C OM M AN D S Con necti vity Fa ult Ma nage ment (CFM) or E therne t Con necti vity Fa ult Ma nage me nt is an end - to - end Ethernet layer OA M proto col. CFM is defined b y IEEE 802.1ag and include s connectivi ty monit[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 424 higher levels regardless of which direction the frames come in. If the port on which the outward MEP is configured is blocked b y Spanni ng - Tree Pro tocol, the M EP can still transmit and receive CFM m essages through the bridge port. A MIP is a maintenance [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 425 The Connectivity Fault Management (CFM) commands in the Command Line Interface (CLI) are list ed (along with the appropriate parameters) in the following table. Command Paramete rs create cfm md <str ing 22 > le vel <in t 0 - 7> config cfm md <s[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 426 create cfm md Purpose Used to create a m aintenance dom ain for CF M. Syntax create cfm md <string 2 2> level < int 0 - 7> Desc ription Use this com m and to create a CF M m aintenance d omain and set the l evel for th at dom ain. Paramete rs m d &[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 427 DES-3200-28F:4# config cfm md op_domain mip explicit Command: config cfm md op_domain mip explicit Success. DES-3200-28F:4# create cfm ma Purpose Used to create a m aintenance ass ociation. Syntax create cfm ma <string 22 > m d <string 22> Descript[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 428 config c f m ma Purpose This comm and is used to configure t he param eters of a pre viousl y created CFM m aintenance associati on. Syntax config cfm ma <str ing 22> m d <string 22> { vlanid <vlanid 1 - 4 094> | m ip [ none | auto | expl ici[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 429 Exa mple usa ge To configure parameters for MA “op1”: DES-3200-28F:4# config cfm ma op1 md op_domain vlan 1 ccm_interval 1sec Command: config cfm ma op1 md op_domain vlan 1 ccm_interval 1sec Success. DES-3200-28F:4# create cfm mep Purpose This comm and is [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 430 DES-3200- 28F:4# create cfm mep mep1 mepid 1 md op_domain ma op1 di rection inward port 2 Command: create cfm mep mep1 mepid 1 md op_domain ma op1 direction inward port 2 Success. DES-3200-28F:4#[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 431 config c f m me p Purpose This comm and is used to configure t he param eters of a pre viousl y created CFM MEP. Syntax config cfm mep [ m epname <strin g 32> | m epid <i nt 1 - 8191 > md <str ing 22> m a <string 22 >] {state [e nable |[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 432 To configure parameters for MEP “m ep1”: DES-3200-28F:4# config cfm mep mep1 state enable ccm enable Command: config cfm mep mep1 state enable ccm enable Success. DES-3200-28F:4# delete cfm mep Purpose This comm and is used to delete a previous ly create d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 433 delete cfm ma Purpose This comm and is used to delete a previous ly create d m aintenance as sociation. Syntax delete cfm ma <string 22> m d <string 22 > Descripti on All MEPs c reated in the m aintenance associat ion will be delet ed autom at ical[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 434 enable cfm Purpose This comm and is used to enable t he CFM g loball y. Syntax enable cfm Descripti on This comm and is used to e nable the C FM glob ally. Paramete rs None. Restricti ons Onl y Administ rat or - le vel user s can issue t his com mand. Exa mple[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 435 config c f m por t s Purpose This comm and is used to enable or disable the CFM f unction o n a per - port basis. Syntax config cfm ports <portl ist> state [ enabl e | disabl e] Descripti on By defaul t, the CFM funct ion is disab led on all ports . If t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 436 Exa mple usa ge To vie w CFM set t i ngs for por t s 3 - 6: DES-3200-28F:4# show cfm ports 3-6 Command: show cfm ports 3-6 Port State ----- --------- 3 Enabled 4 Enabled 5 Enabled 6 Disabled DES-3200-28F:4# show cfm Purpose Thi s comm and is used to show the C[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 437 To view CFM settings for MD “op_dom ain” MA “ op1”: DES-3200-28F:4# show cfm md op_domain ma op1 Command: show cfm md op_domain ma op1 MA VID : 1 MIP Creation : none CCM Interval : 10 second(s) SenderID TLV : Defer MEPID List : 1, 3, 6-7, 12-15 MEPID D[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 438 To vi e w CFM settings for MEP “mep1”: DES-3200-28F:4# show cfm mepname mep1 Command: show cfm mepname mep1 Name : mep1 MEPID : 1 Port : 1 Direction : inward CFM Port State : enabled MAC Address : 00-04-a8-00-00-03 MEP State : enabled CCM State : enabled P[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 439 show cfm fault Descripti on This comm and displays all the fault c onditions detecte d by the M EPs contai ned in the spec ified MA or MD. This dis play prov ides the o verview of the fau lt status by MEPs. Par amete rs m a <string 22 > - The nam e of th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 440 Exa mple usa ge : To di splay CFM configu ration for port 1: DES-3200-28F:4# show cfm port1 Command: show cfm port1 MAC Address: 00-05-78-82-32-01 MD Name MA Name MEPID Level Direction VID ----------- ----------- ----- ----- --------- ---- op_domain op1 1 2 in[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 441 Example usage To initiate a loopback test f r o m MEP “mep1”: DES-3200-28F:4# cfm loopback 00-01-02-03-04-05 mep mep1 Command: cfm loopback 00-01-02-03-04-05 mep mep1 Request timed out. Request timed out. Reply from MPID 52: bytes=xxx time=xxxms Request ti[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 442 show cfm linktrace Purpose This comm and is used to show the link trac e respo nses. Syntax show cfm linktrac e [ mepnam e <string 32 > | m epid <int 1 - 819 1> md <s tring 22> ma <stri ng 22>] { trans_id <uint>} Descripti on This[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 443 To view link trace resu lts for trace of MEP “mep1” transaction “tras _id 26”: DES-3200-28F:4# show cfm linktrace mep mep1 trans_id 26 Command: show cfm linktrace mep mep1 trans_id 26 Transaction ID: 26 From MEP mep1 to 00-20-a2-00-00-01 Start Time 200[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 444 delete cfm linktrace Purpose This comm and is used to delete r eceived link trac e responses . Syntax delete cfm linktrac e { [ md <string 22> { m a <string 22 > { m epid <int 1 - 819 1 > } } | mepnam e <str ing 32 > ] } Descripti on Th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 445 show cfm mip ccm Purpose This comm and is used to displa y the MIP CC M databa se entri es. Syntax show cfm mipccm Descripti on All entries in the MIP CCM data base will be sho wn. A MIP CCM entr y is similar to a FDB which keeps the forwardin g port i nform a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 446 Exa mple usa ge : To enable all MPs to reply to L TM: DES-3200-28F:4# config cfm mp_ltr_all enable Command: config cfm mp_ltr_all enable Success. DES-3200-28F:4# show cfm mp_ltr_all Purpose This comm and is used to show the c urrent c onfigura tion of the &quo[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 447 DES-3200-28F:4# show cfm remote_mep mepname mep1 remote_mepid 2 Command: show cfm remote_mep mepname mep1 remote_mepid 2 Remote MEPID : 2 MAC Address : 00-11-22-33-44-02 Status : OK RDI : Yes Port State : Blocked Interface Status : Down Last CCM Serial Number [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 448 --------------------------- Port VidDrop OpcoDrop ----- ---------- ---------- all 0 0 1 0 0 2 0 0 3 0 0 4 0 0 5 0 0 6 0 0 7 0 0 8 0 0 9 0 0 10 0 0 11 0 0 12 0 0 CFM TX Statistics ----------------------------------------------------------------------- Port AllP[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 449 Exa mple usa ge : To d isp lay the CFM packet CCM counters: DES-3200-28:4# show cfm pkt_cnt ccm Command: show cfm pkt_cnt ccm CCM RX counters: XCON = Cross-connect CCMs Error = Error CCMs Normal = Normal CCMs MEP Name VID Port Level Direction XCON Error Normal[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 450 56 E THERNET OAM C O M M AN D S Ethernet OAM (Op eratio ns, Administra tion, and M aintena nc e) is a data li nk laye r protocol w hich provi des netw ork administrato rs the ab ilit y to moni tor the heal th of the net w or k and q uickl y det ermine t he loc[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 451 config e t he r net_oam port s (m ode) Purpose Used to conf igure Ether net O AM mode f or ports. Syntax config ethernet _oam ports [ <p ortlist> | all ] m ode [ active | passiv e ] Descripti on The c ommand is used to conf igure Eth ernet OAM for por ts[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 452 config e t he r net_oam port s (state) Purpose Used to enabl e or disab le Ethernet OAM per port. Syntax config ethernet _oam ports [<por tlist> | all ] state [ enab le | disa ble ] Descripti on The c ommand is used to e nable or dis able Et hernet O AM [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 453 DES-3200- 28F:4# config ethernet_oam ports 1 link_monitor error_symbol threshold 2 wind ow 1000 notify_state enable Commands: config ethernet_oam ports 1 link_monitor error_symbol threshold 2 windo w 1000 notify_state enable Success DES-3200-28F:4# config e t [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 454 config e t he r net_oam port s (li nk monitor error f r ame seconds) { threshold <num ber> | windo w < milliseco nds 1000 0 - 9000 00> | no tify_sta te [ ena ble | disa ble ] } (1) Descripti on The c ommand us ed to conf igure Et hernet OA M link m[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 455 config e t he r net_oam port s (link mo nitor e rror fra me perio d) Purpose Used to conf igure Ether net O AM link m onitoring er ror fram e period f or ports. Syntax config ethernet _oam ports [<p ortlist> | all ] link _m onitor error_f rame_per iod { [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 456 config e t he r net_oam port s (critical link ev ent) Purpose Used to conf igure Ether net O AM critical link event for por ts. Syntax config ethernet _oam ports [ <p ortlist> | all ] critica l_link _event { d ying_gas p | critic al_event } notify_st ate[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 457 config e t he r net_oam port s (remote l oopback) Purpose Used to start or stop Et hernet OAM rem ote loopback mode for the rem ote peer of t he port. Syntax config ethernet _oam ports [<por tlist> | all ] rem ote_loo pback [ start | stop ] Descripti on [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 458 config e t he r net_oam port s (re c ei v ed re m ot e l oopba ck) Purpose Used to conf igure the m ethod to process the recei ved Ether net OAM r emote l oopback comm and. Synta x config ethernet _oam por ts [ <p ortlist> | a ll ] recei ved_rem ote_loop[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 459 show e thernet _oam port s (status) • SendLoc alAn dRemot eOk : T he local de vice agre es the OAM peer ent ity. • PeeringLo callyRej ected : The local O AM ent ity rejec ts the rem ote peer O AM entit y. • PeeringRem otelyRe jected : The rem ote OAM ent[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 460 Exa mple usa ge To show OAM control an d status inform ation on port 1 - 2: DES-3200-28F:4# show ethernet_oam ports 1-2 status Commands: show ethernet_oam ports 1-2 status Port 1 ------------------- Local Client OAM : Disabled Mode : Active Max OAMPDU : 1518 B[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 461 show e thernet _oam port s (confi guration) Purpose Used to displa y Ethern et OAM co nfigurat ion per por t. Syntax show etherne t_oam ports {<portlis t>} conf iguration Descri ption Use this to view Ethernet O AM co nfigurat ions for port s. Paramete r[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 462 Exa mple usa ge : To sho w Ethe rnet OAM c onfi gurat io n o n po r t 1 - 2: DES-3200-28F:4# show ethernet_oam ports 1-2 configuration Commands: show ethernet_oam ports 1-2 configuration Port 1 --------------------------------------------------- OAM : Enabled [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 463 show e thernet _oam port s (statistics) Purpose Used to displa y Ethern et OAM stat istics f or ports. Syntax show etherne t_oam ports {<portlis t>} stat istics Descripti on Use this c omm and to displ ay Ethernet O AM por ts statis tics infor mation. Pa[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 464 show e thernet _oam port s (event log) Purpose Used to display Ethernet O AM event log Syntax show etherne t_oam { <portlist>} e vent_ log { index <value_ list>} Descripti on Use this c omm and to view ports Et hernet OAM event l og inform ation. T[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 465 clear et her ne t _ oam por ts (statistics) Paramete rs <por tlis t> - S pecifies a range of ports to cl ear OAM s tatistics . Use all to specif y all ports . Restricti ons Onl y Administ rat or - le vel user s can issue t his c om m and. Exa mple usa ge[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 466 57 BPDU A T T AC K P ROTEC TION C O M M AN D S The BPDU Attack Protection commands in the Co mman d Line I nterf ace (CLI) are listed (along wi th the appropr iate param eters) in the followi ng table . Command Para meters config bp du_protect ion port s [<[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 467 config bpdu_ pr otecti on ports Purpose Used to conf igure the B PDU Att ack Protection st ate and m ode of a port. Syntax config bpdu_ protection ports [<portlist > | all ] {sta te [enable | disab le] | mode [ drop | b lock | shutdown } (1) Descripti on[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 468 Exa mple usa ge : To se t the B PDU a ttack protecti on port s tate to e nable a nd drop m ode: DES-3200-28F:4# config bpdu_protection ports 1 state enable mode drop Commands: config bpdu_protection ports 1 state enable mode drop Success. DES-3200-28F:4# confi[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 469 config bpdu_ pr otecti on trap/log Purpose Used to conf igure trap a nd log se ttings f or BPDU at tack protection e vents. Syntax config bpdu_ protection [ trap | log ] [ non e | attac k_detect ed | attack _cleared | bot h ] Descripti on Use this c omm and to[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 470 enable bpdu_ pr otecti on Purpose Used to globa lly enable BPDU at tack protection on the S witch. Syntax enable bpdu_prot ecti on Descripti on Use this t o enab le BPDU at tack protection. NOTE : The BPDU A ttack Pro tection fun ction and Spanning Tre e Pr ot[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 471 disabl e bpdu_protect i on Purpose Used to disable BPDU attack pr otection on the Switc h. Syntax disable bpd u_protec tion Descripti on Use this t o disab le BPDU a ttack protection on the ent ire Switch. N ote that if BPDU attack protection is disa bled glob[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 472 DES-3200-28F:4# show bpdu_protection ports 1-12 Commands: show bpdu_protection ports 1-12 Port State Mode Status ------ ------------ ----------- ---------- 1 Enabled shutdown Normal 2 Enabled shutdown Normal 3 Enabled shutdown Normal 4 Enabled shutdown Normal [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 473 58 P ER -Q UEUE B A NDWIDTH C ONTROL C O M M AN D S The Per - Queue Bandwidth Control commands in the Command Line Interface (CLI) are lis ted (alo ng with t he ap prop ria te parameters) in the f ollowing table: Command Para meters config per_ queue bandwidt [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 474 config per_que ue bandwi dth_contr ol Purpose Used to conf igure band width contr ol appl ied to a s pecific hardware pr iorit y queue on a per por t basis. Syntax config per_que ue ban dwidth_c ontrol { ports [ <portl ist> | all ] } <co s_id_list>[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 475 show per_queue ba ndwidt h_control Purpose Used to displa y the conf igur ation settings for per - queue ba ndwidth control. Syntax show per_qu eue band width_contr ol {<portl ist>} Descripti on Use this c omm and to view t he per - queu e band width li [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 476 59 ERPS C OMMA NDS The Ether net Ri ng Pro tect ion Switchi ng ( ERPS ) de fined i n IT U - T G.8032 i s int ended t o provide a protection sw itching an d recovery process, and t o preven t loops f orming for Eth er net in a ring t opology . The ERPS comman d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 477 enable er ps Purpose Used to enabl e the glob al ERPS f unction o n the S witch. Syntax enable erps Descripti on This comm and is used to e nable the g lobal ER PS func tion on the Switch. F or eac h ring with the ring state ena ble d when ERP S is enabl e d, [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 478 create erps VLA N Purpose Used to define an existi ng VLAN as an R - A PS VLAN on the S witch. Syntax create erps ra ps_vlan <vlanid > Descripti on Use this c omm and to creat e a spec ial R - APS VLAN th at is used f or trans ferring R - APS control m e[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 479 config e r ps ring_mel Purpose Used to conf igure the ME L (m aintenance e ntity grou p level) v alue. Syntax config erps raps _vlan <vlanid > ring_m el <value 0 - 7> Descripti on This comm and is used to c onfigure t he ring ME L for a n R - APS V[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 480 config e r ps ring_port Purpose Used to conf igure the por ts of the ERPS r ing for a s pecif ic R - APS VL AN. Syntax config erps raps _vlan <vlanid > ring_por t [west <p o rt> | east <port>] Descripti on This comm and is used to c onfigure [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 481 config e r ps rpl Purpose Used to define the RPL p ort or the RPL owner status for a spec ific R - APS VL AN. Syntax config erps raps _vlan <vlanid > [ rpl_por t [west | east | n one] | rp l_owner [ enable | disable] ] Descripti on This comm and is used [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 482 config e r ps protected VL AN Purpose Us ed to configure the prote cted VLAN for a s pecific R - APS VLA N. Syntax config erps raps _vlan <vlanid > protected _vlan [ad d | delet e] vlanid <vidlist > Descripti on This comm and is used to d esignate [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 483 config e r ps timer Purpose Used to conf igure ERPS tim ers for an R - APS VLAN . Syntax <vlanid> tim er { holdof f_time <m illisecond 0 - 10000 > | guard_t ime <m illisecond 10 - 2000 > | wtr_tim e <min 5 - 12>} ( 1) Descripti on This [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 484 config e r ps log Syntax config erps l og [enabl e | disabl e] Descripti on This comm and is used to e nable or disable lo gging of ERPS eve nts. Paramete rs enable | disab le – Us e to def ine the stat us of ERP S loggi ng. Loggin g is disa bled b y default[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 485 Exa mple usa g e: To display curr e nt ERP S informatio n : DES-3200-28F:4# show erps Command: show erps ERPS Information --------------------------- ERPS Status : Enabled R-APS VLAN : 8 West Port : 25 (Blocking) East Port : 26 (Forwarding) RPL Port : West Por[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 486 60 N ETWORK L O AD B A L A NCING (NLB) C OM M AN D S The Network Load Balancing (NLB) co m mands are used to configure the Switch to suppor t Network Load Balancing Service , a prop rietary Microsoft i mplementation of server c lustering a nd load bala ncing, [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 487 create nlb unicast_fdb Purpose Used to create a n entr y for the N LB unic ast FDB. Syn tax create nlb u nicast_f db <mac addr> Descripti on For NLB, the Switc h uses a FDB that is separat e from and ind ependent of the Layer 2 unicast F DB. Si nce a MAC[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 488 delete nlb unicast _fdb Purpose Used to remove a prev iously create d MAC addr ess e ntr y from the NLB un icast FD B. Syntax delete nlb un icast_fdb Descripti on The delet e nlb un icast_f db comm and is used t o rem ove an entr y from the N LB FDB. Paramete [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 489 create nlb multicast_fdb Purpose Used to create a n entr y for the N LB multicas t FDB. Syntax create nlb m ulticast_f db [ <vlan_ name 32> | vlanid <vlanid 1 - 4 094 >] <mac addr> Descripti on The m ulticast NL B FDB is needed in order to m [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 490 delete nlb mu lticast_fdb Purpo se Used to rem ove a pr eviousl y created M AC addres s ent ry from the NLB m ulticast F DB. Syntax delete nlb m ulticast_f db [<vlan _name 32 > | vlanid <vlanid 1 - 4094>] <m acaddr> Descripti on The delet e n[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 4 91 Exa mple usa ge : To con figure a NLB multicast MAC f orwarding database entry: DES-3200-28F:4# config nlb multicast_fdb default 03-bf-01-01-01-01 add 1-5 Command: config nlb multicast_fdb default 03-bf-01-01-01-01 add 1-5 Success. DES-3200-28F:4# show nlb f [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 492 61 PPP O E C IRCUIT ID I NSERTI ON C OM M A NDS PPPoE Circ uit ID Inserti on is used to produ ce th e unique subscri ber mappi ng capabi lity tha t is possibl e on ATM netw orks between ATM - DSL local l oop and the PPPoE server. The PPPoE server w ill use the[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 493 config pppoe c ir cuit_i d_ins e r tion state Purpose Used to enabl e or disab le the PP PoE circuit identif ier inser tion. Syntax config pppoe c ircuit_id _insert ion state [ enable | disabl e] Descripti on W hen PPPoE circ uit ident ifier insert ion is en a[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 494 config pppoe c ir cuit_i d_ins e r tion ports Purpose Used to enabl e and disab le PPPo E circui t identif ier insertion on a per port basis and specif y how to enc ode the circuit ID option. Syntax config pppoe c ircuit_id _insert ion ports <portlis t> [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 495 DES-3200-28F:4# show pppoe circuit_id_insertion Command: show pppoe circuit_id_insertion Status: Disabled DES-3200-28F:4# show pppoe ci r cuit_i d_ins e rt i on ports Purpose Used to displa y the PP PoE ID i nsertion c onfigur ation o n a per port basis. Synta[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 496 62 DHCP S ER VER S CREENING S E TTINGS Due to this function allo w you not o nly to restrict all DHCP Server packets but als o to receive any specified DHCP server packet by an y sp eci fied DHCP cli ent , i t is u sef ul when o ne or mor e tha n one DH CP ser[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 497 config f il ter dhcp_ser ver Purpose DHCP server p ack ets except thos e that hav e been IP/ client M AC bound will be f iltered. This c ommand is used to conf igure the s tate of the fun ction for f iltering of DHCP s erver pack et and to add/de lete th e DHC[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 498 show f ilter dhcp_server Purpose Used to displa y current DHCP ser ver/cli ent filter l ist create d on the swit ch. Syntax show filter dhc p_server Descripti on This comm and is used to di spla y DHCP server /client fi lter list c reated on the switch. Parame[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 499 config f il ter dhcp_ser ver trap / log Purpose Used to enabl e or disab le the trap and log f unctions f or DHCP s erver sc reening. Synta x conf ig filter dhc p_server [ trap | log ] [ enab le | dis able ] Descripti on This comm and will enable or disable tr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 500 A PPENDIX A - P A SSWORD R ECOVERY P ROCEDURE This docum ent descri bes th e procedure f or reset ting passwords on D - Link Switc hes. Authenticating any us er who tries to access netw o rks is necessary and im portant. The basic authentication method us ed t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 501 In the “Password Recovery Mod e” o nly the following commands can be used. Command Para meters reset conf ig T he reset conf ig comm and res ets the who le config uration will be back to the default value reboot T he reboot com mand ex its the R eset Pas s[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 502 A PPENDIX B – S YST EM L OG E NTRIES The f ollowing table l ists all possible en tries and th eir cor responding m eanings that will appear in the Syste m Log of this S witch. Category Even t D escription Log Inform a tion Severit y s ys t em System cold s t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 503 Configura tion upl oad b y console w as unsucc essful Configura tion upl oad b y conso le was unsuc cessful! (Usernam e: <user name>) W arning Log mes sage succ essf ully uploaded Log mes sage succ essfully upl oaded (User nam e: <usernam e>, IP: &[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 504 SNMP SNMP re quest rec eived with inval id comm unity strin g SNMP req uest recei ved fro m <ipAddres s> wit h invalid comm unity string! W arning STP T opolog y changed Topolog y changed (Instanc e:<Instanc eID> port<portNum >) Inf ormationa[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 505 Success ful logi n through Telnet a uthentic ated b y AAA local m ethod Success ful login throu gh Telnet f rom <userI P> authen ticated by AA A local m ethod ( Usern ame: <usernam e>) Inf ormationa l Login fai led thr ough Teln et authent icated b[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 506 Login fai led thr ough W eb (SSL) due to A AA server timeout or imprope r configurat ion Login fai led through W eb(SSL) f rom <userIP > due to AAA server t i meout or improper configur ation (Us ernam e: <usernam e>) W arning Success ful logi n th[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 507 Succe ssful E nable Adm in through S SH authent icated by AAA loc al_enabl e method Success ful Enabl e Adm in through SSH from <userIP> authent icated b y AAA local_ enable m ethod (Us ernam e: <usernam e>) Inf ormationa l Enable Adm in failed thr[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 508 server Enable Adm in failed through T elnet authent icated by AAA server Enable A dmin f ailed through T elnet f rom <userIP> authent icated b y AAA ser ver <serv erIP> (User nam e: <usernam e>) Wa rning Enable Adm in failed through T elnet d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 509 Password c hange ac tivit y User <user nam e> Passwor d was chang ed b y (Userna me: <usernam e>, IP:<i paddr>) Inform ational Password c hange ac tivit y by console U ser <usernam e> Pas sword was changed by consol e (Usernam e: <us[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 510 Port with VI D Loop detection restarte d afte r inter val t im e Port <portNum > VID <vl anID> LBD reco vered. Loop detection res tarted. Inform ational VLAN LOOP Max N umber exceed Loop VLAN number overflow Inform ational Denial of Servi ce The Do[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 511 Rem ote MEP's MAC reports an error s tatus CFM rem ote MAC error . MD L evel:<m dlevel>, VLA N:<vl anid>, Local( Port < portNum>, Direction: <mepdir ection>) W arning Rem ote MEP detect s CFM defects CFM rem ote detects a def ect. [...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 512 A PPENDIX C – T R AP L O G E NTRIES T rap Name/OID Variable Bin d Format MIB Name coldStart 1.3.6.1.6.3.1 .1.5.1 None V2 RF C1907 (SNM Pv2 - MIB) warm Start 1.3.6.1.6.3.1 .1.5.2 None V2 RF C1907 (SNM Pv2 - MIB) authent icationFa ilure 1.3.6.1.6.3.1 .1.5.5 No[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 513 dot3Oam EventLog EventTotal dot3Oam NonThr esholdEve nt 1.3.6.1.2 .1.158.0.2 dot3Oam EventL ogTim estamp dot3Oam EventLogO ui dot3Oam EventLogT ype dot3Oam EventLogL ocation dot3Oam EventLog EventTotal V2 DOT 3 - OAM - MIB Proprietar y Trap Lis t Trap Nam e/OI[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 514 1.3.6.1.4 .1.171.12.8 .6.0.12 swSingl eIPMSMac Addr swSingl eIPMSLink Down 1.3.6.1.4 .1.171.12.8 .6.0.13 swSingl eIPMSID s wSingleIP MSMacA ddr ifIndex V2 SING LE - IP - MIB swSingl eIPMSLink Up 1.3.6.1.4 .1.171.12.8 .6.0.14 swSingl eIPMSID swSingl eIPMSMacA d[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 515 1.3.6.1.4 .1.171.11.1 13.1.4. 2.20.0.2 L2 mgmt .mi b des3200 - 28 - L2 mg mt. mib des3200 - 28f - L2 mg mt. mib swL2Port LoopOcc urred 1.3.6.1.4 .1.171.11.1 13.1.1. 2.20.0.3 1.3.6.1.4 .1.171.11.1 13.1.2. 2.20.0.3 1.3.6.1.4 .1.171.11.1 13.1.3. 2.20.0.3 1.3.6.1.[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 516 A PPENDIX D - RADIUS A TTRIBUTES A SSI GNMENT The RADIU S Attr ibutes As s ignm ent on the D ES - 3200 is used in the f ollo wing m odules: 802.1X (Port - b ased and Hos t - based), a nd MAC - bas ed Ac cess Contr ol. The desc ription th at follo ws explains t[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 517 To ass ign 802.1p default priorit y by RADIUS Server , th e proper par ameter s should be conf igured on th e RADIUS Server. T he tables b elow s how the p aram eters for 802.1p default priorit y. The param eters of the Vendor - Specif ic attributes are: Vendo[...]

xStack® DES - 3200 Ser ies L ayer 2 Ethe rnet Manage d Switch C LI Refe rence Gui de 518 The param eters of the Vendor - Specif ic Attribut e are: RADIUS Tunnel A ttribute Descrip tion Value Usage Vendor - ID Defines th e vendor . 171 (DL INK) Requ ired Vendor - T yp e Def ines the attr ibute. 12 (for ACL prof ile) 13 (for AC L rul e) Required Att[...]