D-Link VDI-604 инструкция обслуживания

D-Link Express EtherNetwork TM VDI-604 4-Port Ethernet Broadband Router Manual Building Networks for People[...]

-2- Contents Introduction ......................................................................................... 3 Package Content s .........................................................................7 Hardware Description ..................................................................8 Reset ............................................[...]

-3- Intr oduction The D-Link Express EtherNetwork VDI-604 is a 4-port Ethernet Broadband Router . The D-Link VDI-604 enables users to quickly and easily share a high speed Internet connection. The D-Link VDI-604 also incorporates many advanced features, traditionally found in more expensive routers. The VDI-604 is compatible with most popular opera[...]

-4- Network Address T ranslation NA T allows you to share a single IP Address and protect s you from outside intruders gaining access to your private network. DHCP Server Supported All of the networked computers can re trieve TCP/IP settings automatically from the VDI-604. Web-Based Management VDI-604 is configurable through any network computer’[...]

-5- T e c hnology Intr oduction Introduction to Broadband Router T echnology A router is a device that forwards data packet s from a source to a destination. Routers forward data p ackets using IP addresses and not a MAC address. A router will forward data from the Internet to a p articular computer on your LAN. The information that makes up the In[...]

-6- Introduction to Local Area Networking Local Area Networking (LAN) is the term used when connecting several computers together over a small area such as a building or group of buildings. LAN’ s can be connected over large areas. A collection of LAN’s connected over a large area is called a Wide Area Network (W AN). A LAN consists of multiple[...]

-7- P ackage Contents  VDI-604 Ethernet Broadband Router  Power Adapter  2 Ethernet Cables Note : Using a power supply with a different voltage rating will dam age and void the warranty for thi s product. If any of the above items are mi ssing, please contact your reseller .[...]

-8- Har dware Description Front Panel Power Power indicator will light Green . W AN W AN st atus indicator will light Green when there is good physical W AN connection. LAN Link/Act. Link status indicators light Green. The LED flickers when the corresponding port is sending or receiving data. Power W AN LAN[...]

-9- Hardware Description Rear Panel Reset Used to restore the VDI-604 back to factory default settings. LAN PORTS * 1-4 LAN port sockets (CA T5 Ethernet RJ-45 cable). The LED glows steadily when a port is connected to a hub, switch or network-adapter-equipped computer in your local area network (LAN.) WA N * W AN port socket (CA T5 Ethernet RJ-45 c[...]

-10- Getting Star ted Inst allation Location The VDI-604 can be positioned at any convenient place in y our office or house. No special wiring or cooling requirement s are needed. However , you should comply with the following guidelines:  Place the VDI-604 on a flat horizontal plane.  Keep away from any heating devices.  Do not place in a[...]

-1 1- Configuring the VDI-604 The VDI-604 provides an embedded W eb-b ased management utility making it operating system independent. Y ou can configure your VDI-604 through the Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh, Linux or UNIX based platforms. All th at is needed is a web browser such as Internet Explorer o[...]

-12- Using the Configur a tion Menu Setup Wizard The Setup Wizard pag e is the first page that appears when logging into the web-based management interface. The Setup Wizard is a utility used to quickly configure the VDI-604. It will guide you through four quick and basic steps to help you connect to your Ihigh speed Internet access . Y ou will be [...]

-13- HOME > W AN > DYNAMIC IP Address Choose Dynamic IP Address to obt ain IP address information automatically from your ISP . Select this option if your ISP does not give you any IP numbers to use. Host Name: The Host Name field is optional but may be required by some ISPs. The host name is the device name of the Broadband Router . MAC Addr[...]

-14- HOME > W AN > St atic IP Address Choose S tatic IP Address if all W AN IP information is provided to you by your ISP . Y ou will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP . Each IP address entered in the fields must be in the appropriate IP form, which are four IP octet[...]

-15- HOME > W AN > PPPOE Choose PPPoE (Point to Point Protocol ov er Ethernet) if you’re ISP uses PPPoE connection. Y our ISP will provide you with a username and p assword. . Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select S t atic PPPoE to us e a static IP address for your PPPoE connectio n. Dy[...]

-16- Maximum Idle T ime: The amount of time of inactivity before disconnecting your PPPoE session. Enter a Maximum Idle T ime (in minutes) to define a maximum period of time for which the Internet connection is maintaine d during inactivity . If the connect ion is inactive for longer than the defined Maximum Idle T ime, then the connection will be [...]

-17- HOME > LAN LAN is short for Local Area Network. This is considered your internal network. These are the I P settings of the LAN interface for th e VDI-604. These settings may be referred to as Private settings. Y ou may change the LAN IP address if n eeded. The LAN IP address is private to your internal network and cannot be seen on the Int[...]

-18- HOME > DHCP DHCP st ands for Dynamic Host Confi guration Protocol. The VDI-604 has a built-in DHCP server . The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP client s by setting their TCP/IP settings to “Obtain an IP Address Automatically .” When[...]

-19- ADV ANCED > VIRTUAL SERVER The VDI-604 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN network. The VDI-604 firewall feature filters out unrecognized p ackets to protect your LAN network so all computers networked w[...]

-20- to a particular port may be redirect ed to a different port o n the server computer . Each virtual service that is created will be listed at the bottom of the screen in the V irtual Servers List. There are already pre-defined virtual services already in the table. Y ou may use them by enabling them and assigning the server IP to use that parti[...]

-21- Click on this icon to edit the virtual service. Click on this icon to delete the virtual service. Example #2: If you have an FTP server that you wanted Internet users to access by W AN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP . Name: FTP Serve[...]

-22- Some applications require multiple connections, such as Int ernet gaming, video conferencing, Internet telephony and others. These applications have difficulties working t hrough NA T (Network Address T ranslation). S pecial Applications makes some of these applications work with the VDI-604. If you need to run applications that require multip[...]

-23- Trigger T ype: This is the protocol used to trigger the specia l application. Public Port: This i s the port number on the W AN side that will be used to access the application. Y ou may define a single port or a range of ports. Y ou can use a comma to add multiple ports or a hyphen to add port ranges. Public T ype: This is the protocol used f[...]

-24- ADV ANCED > FIL TERS > IP FIL TERS Filters Filters are used to deny or allow LAN com puters from accessing the Internet. The VDI-604 can be setup to deny internal co mputers by their IP or MAC addresses. The VDI-604 can also block users fr om accessi ng restricted web sites. IP Filters Use IP Filters to deny LAN IP addresses from acce ss[...]

-25- ADV ANCED > FIL TERS > MAC FIL TERS Use MAC Filters to allow or deny LAN computers by their MAC addresses from accessing the Internet. Y ou can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router .[...]

-26- ADV ANCED > FIL TERS > URL BLOCKING URL Blocking is used to deny LAN computer s from accessing specific web sites by its URL. A URL is a specially formatted text string that defines a location on the Internet. I f any part of the URL contains the blocked word, the site will not be accessible and the web page will not display.[...]

-27- ADV ANCED > FIL TERS > DOMAIN BLOCKING Domain Blocking is used to allow or deny LAN computers from accessing specific domains on the Internet. Domain blocking will deny all requests to a specific domain such as http and ftp. It can also allo w computers to access specific sites and deny all other sites.[...]

-28- ADV ANCED > FIL TERS > FIREW ALL Firewall Rules is an advance feature used to deny or allow traffic fro m passing through the Broadband Router . It works in the same way as IP Filters with additional settings. Y ou can create more det ailed access rules for the VDI-604. When virtual services are created and enabled, it w ill also display[...]

-29- ADV ANCED > DMZ If you have a client PC that cannot r un Internet applications properly from behind the VDI-604, then you can set the client up to unrestricted In ternet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ h[...]

-30- TOOLS > ADMIN Admin At this page, the VDI-604 administrator can change the system p assword. There are two account s that can access the Broadband Router ’ s Web-Management interface. They are admin and user . Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Remote M[...]

-31- recommended that you set the IP address to * (star), because this allows any Internet IP address to access the Broadband Router , which could result in a loss of security for your network. If you elect to enable Remote Management, enter the IP Address of your remote location. Port: The port number used to access the Broadband Router . (Select [...]

-32- T OOLS > TIME Ti me The system time is the time used by the VDI-604 for scheduling services. Y ou can manually set the time or connect to a NTP (Network T ime Protocol) server . If an NTP server is set, you will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the system time will Auto[...]

-33- TOOLS > SYSTEM System Settings The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file can be loaded back on the Broadband Router . T o reload a system settings file, click on Browse to browse the local hard drive and locate the system file to be used. Y ou may also reset [...]

-34- T OOLS > MISC Miscellaneous Items These are additional tools and features of the Broadband Router . Ping T est This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packet s and listens for replies from the specific host. Rest art Device If for any reason the Broadband Router is not responding c[...]

-35- public W AN IP addresses is a common method used by hackers to test whether your W AN IP address is valid. Discard PING from W AN side : By enabling this option, the VDI-604 will not reply to ping (ICMP) request packet s from the Internet. VPN Pass-Through The Broadband Router supports VPN (V irtual Private Network) pass-through for both PPTP [...]

-36- TOOLS > VCT Virtual Cable T ester (VCT) is an advanced feature that int egrates a LAN cable tester on every Ethernet port on the router . Through the graphical user interface (GUI), VCT can be used to remotely diagnose and report cable faults such as opens, shorts, swap s, and impedance mismatch. The VCT feature significantly reduces servic[...]

-37- ST A TUS > DEVICE INFORMA TION This page d isplays the current information for the Broadband Router . It will display the W AN, LAN, and MAC address information. If your W AN connection is set up for Dynamic IP address, there will be a Release button and Renew button. Use Release to disconnect from your ISP and use Renew to connect to your [...]

-38- This page allows you to observe the VDI-604’ s working status: W AN • IP Address: W AN/Public IP Address • Subnet Mask: W AN/Public Subnet Mask • Gateway: W AN/Public Gateway IP Address • Domain Name Server: W AN/Public DNS IP Address • W an S tatus: W AN Connection S tatus LAN • IP Address: LAN/Private IP Address of the VDI-604 [...]

-39- ST A TUS > LOG Log The Broadband Router keeps a running log of event s and activities occurring on the Router . If the device is rebooted, the logs are automatically cleared. Y ou may save the log files under Log Setting. First Page - The first p age of the log. Last Page - The la st page of the log. Previous - Moves back one log p age. Nex[...]

-40- ST A TUS > ST A TS T raffic St atistics The Broadband Router keeps st atistic of traf fic that passes through it. Y ou are able to view the amount of packet s that passes through the Router on both the W AN port and the LAN port. The traffic counter will reset if t he device is rebooted.[...]

-41- T r oubleshooting If you do not wish to set the st atic IP address on your PC, you will need to configure your PC to request an IP address from the gateway . Click the Start button, select Settings , and select Control Panel . Double-click the Network icon. In the configuration tab, select the T CP/IP protocol line that has been associated wit[...]

-42- After clicking OK , windows might ask you to rest art the PC. Click Ye s . CONFIRM YOUR PC’S IP CONFIGURA TION There are two tools which are great for finding out a computer ’ s IP configuration: MAC address and default gateway . WINIPCFG (for Windows 95/98) Inside the windows 95/98 S tart button, select Run and type winipcfg. In the examp[...]

-43- IPCONFIG (for Windows 2000/NT/XP) At the command prompt type IPCONFIG and press Enter . Y our PC IP information will be displayed as shown below .[...]

-44- Assigning a St atic IP Address Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology . If you are using a DHCP-cap able Gateway/Router you will not need to assign S tatic IP Addresses. If you are not using a DHCP cap able [...]

-45- Right-click on Local Area Connections . Double-click Properties Highlight Internet Protocol (TCP/IP) Click Properties[...]

-46- Select Use the following IP address in the Internet Prot ocol (TCP/IP) Properties window . Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and [...]

-47- Netw or king Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to est ablish a network at home or work, using Microsof t Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsoft.com/windows2000 for inform ation about networking computers using Windows 2000, M[...]

-48- Networking Basics Please follow all the instructions in t his window: Click Next In the following window , select the best description of your computer . If your computer connects to the Internet through a gateway/router , select the second option as shown. Click Next[...]

-49- Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next[...]

-50- Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next . Please wait while the Network Setup Wizard configures the computer . This may take a few minutes.[...]

-51- Networking Basics In the window below , select the best option. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Insert a disk into the Floppy Disk Drive, in this case drive A. Format the disk if you wish, and click Next.[...]

-52- Networking Basics Please wait while the Network Setup Wizard copies the files. Please read the information under Here’ s how in the screen below . After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. T o continue click Next.[...]

-53- Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take ef fect when you restart the computer . Click Ye s to restart the computer . Y ou have completed configuring this computer . Next, you will need to run the Network Setup Disk on all the other compute[...]

-54- Networking Basics Naming your Computer T o name your computer , please follow these directions: In Windows XP : • Click Star t (in the lower left corner of the screen) • Right-click on My Computer • Select Properties and click • Select the Computer Name Ta b in the System Properties window . Y ou may enter a Computer description if you[...]

-55- Networking Basics Naming your Computer Checking the IP Address in W indows XP/2000 Go to Start > All Programs > Accessories > Command Prompt • In this window , enter the Computer name . • Select W orkgroup and enter the name of the Workgroup . • All computers on your network must have the same Workgroup name. • Click OK[...]

-56- Networking Basics Checking the IP Address in W indows XP/2000 Ty p e Command Click OK Checking the IP Address in W indows XP/2000 T ype ipconfig /all at the prompt. Click Enter . All the configuration settings are displayed as shown below . D-Link Air Plus DWL-650+ W ireless Cardbus Adapter[...]

-57- Networking Basics Checking the IP Address in W indows XP/2000 T ype ipconfig /renew at the prompt to get a new IP Address. Click Enter . The new IP Address is shown below . ( Windows 98/ME users: go to Start > Run . T ype Command . T ype winipcfg at the prompt. Click Release and Renew to obt ain a new IP Address.)[...]

-58- Assigning a S tatic IP Address Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology . If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP cap able Ga[...]

-59- Networking Basics Assigning a S tatic IP Address • Double-click on Network Connections • Right-click on Local Area Connections. • Double-click Properties[...]

-60- Networking Basics Assigning a S tatic IP Address • Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be t[...]

-61- Networking Basics Adding and Sharing Printers in Windows XP After you have run the Network Setup Wizard on all the computers in your network (please see the Network Setup Wizard section at the beginning of Networking Basics ,) you can use the Add Printer Wizard to add or share a printer on your network. Whether you want to add a local printer [...]

-62- Networking Basics A d d i n g a l o c a l p r i n t e r • Go to Start > Printers and Faxes • Click on Add a printe r[...]

-63- Networking Basics Adding a local printer • Click Next • Select Local printer att ached to this computer • (Deselect Automatically detect and install my Plug and Play printer if it has been selected.) • Click Next • Select Use the following port: • From the pull-down menu select the correct port for your printer (Most computers use [...]

-64- Networking Basics Adding a local printer • Select and highlight the correct driver for your printer . • Click Next (If the correct driver is not displayed, insert the CD or floppy disk that came with your printer and click Have Disk .) • A t this screen, you can change the name of the printer (optional.) • Select Ye s , to print a test[...]

-65- Networking Basics Adding a local printer Click Finish This screen gives you information about your printer . When the test page has printed, Click OK[...]

-66- Networking Basics Adding a local printer • Go to Start > Printers and Faxes A successful inst allation will display the printer icon as shown at right. Y ou have successfully added a local printer .[...]

-67- Sharing a network printer After you have run the Network Setup Wizard on all the co mputers on your network, you can run the Add Printer Wizard on all the computers on your network. Please follow these directions to use the Add Printer Wiza rd to share a printer on your network: • Go to Sta rt > Printer and Faxes[...]

-68- Networking Basics Sharing a network printer • Click on Add a Printer • Click Next • Select Network Printer • Click Next[...]

-69- Networking Basics Sharing a network printer • Select Browse for a printer • Click Next • Select the printe r you would like to share. • Click Next • Click Finish[...]

-70- Networking Basics Sharing a network printer T o check for proper inst allation: • Go to Start > Printers and Faxes The printer icon will appear at right, indicating proper installation. Y ou have completed adding the printer . T o share this printer on your network: • Remember the printer name • Run the Add Printer Wiza rd on all the [...]

-71- Networking Basics Sharing an LPR printer T o share an LPR printer (using a print server ,) you will need a Print Server such as the DP-101P+ . Please make sure that you have run t he Network Setup Wizard on all the computers on your network. T o share an LPR printer , please follow these directions: • Go to Start > Printers and Faxes • [...]

-72- Networking Basics Sharing an LPR printer • Select Create a new port • From the pull-down menu, select St andard TCP/IP Port , as shown. • Click Next • Please read the instructions on this screen. • Click Next • Enter the Printer IP Address and the Port Name , as shown. • Click Next[...]

-73- Networking Basics Sharing an LPR printer • In this screen, select Custom. • Click Settings • Enter the Port Name and the Printer Name or IP Address . • Select LPR • Enter a Queue Name (if your Print-Server/ Gateway has more than one port, you will need a Queue name .) • Click OK[...]

-74- Networking Basics Sharing an LPR printer • This screen will show you information about your printer . • Click Finish • Select the pr inte r you are adding from the list of Printers . • Insert the printer driver disk that came with your printer . • Click Have Disk If the printer driver is already installed, • Select Keep existing dr[...]

-75- Networking Basics Sharing an LPR printer • Y ou can rename your printer if you choose. It is optional. Please remember the nam e of your printer . Y ou will need this information when you use the Add Printer Wizard on the other computers on your network. • Click Next • Select Y es , to print a test page. • Click Next This screen will d[...]

-76- Other T asks For help with other tasks in home or small of fice networking, see Using the Shared Document s folder and Sharing files and folders in the Help and Support Center in Microsoft Windows XP .[...]

-77- T e c hnical Specifica tions St andards • IEEE 802.3 10Base-T Ethernet • IEEE 802.3u 100Base-TX Fast Ethernet • IEEE 802.3 Nway Auto-Negotiation VPN Pass Through / Multi-Sessions • PPTP • L2TP • IPSec Device Management Web-Based – requires at least Microsoft Internet Explorer v5 or later , Netscape Navigator v4 or later , or othe[...]

-78- • FCC • UL Dimensions • L = 5.6in (142mm) • W = 4.3in (109mm) • H = 1.2in (31mm) Weight 0.44 lbs (200g)[...]

-79- War r an ty W arranty S tatement Limited W arranty (USA Only) Subject to the terms and conditions set forth herein, GTE.Net LLC d/b/a Ve rizon Internet Solutions and V erizon Internet Services Inc. (collectively “V erizon Online”) provide this Limited W arranty for the products you are obtaining through V erizon Online (“Product(s)”). [...]

-80- date of original purchase from V erizon Online. If a material defect is incapable of correction or if V erizon Online det ermines in its sole discretion that it is not practical to repair or replace the defective hard ware, the price paid by Customer for the defective har dware will be refunded by V erizon Online u pon return to V erizon Onlin[...]

-81- Product has been tested and foun d to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designed to prov ide reasonable protection against harmful interferenc e in a residential installation. This Product generates, uses and can radiate radio frequ ency energy and, if not installed and[...]

-82- Online; Products that have been purchased from other than V erizon Online; Repair by any party other than V erizon Online or as directed by V erizon Onlin e will void this Limited W arranty . Li mita tion of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LA W , VERIZON ONLINE IS NOT LIABLE UNDER ANY CONTRACT , NEGLIGENCE, ST RIC T LIABILITY OR [...]

-83- the Software is properly installed on approv ed hardware and operated as contemplated in its documentation. V erizon Online further passes on to Customer the warranty of the Licensor that, during the Software Warrant y Period, the magnetic media on which the Licensor delivers the Software will be free of physical defects. The Licensor ’s sol[...]

-84- • Upon Customer ’s request, V erizon Onlin e will provide Customer with an RA and postage-paid package for the original Product under warranty . No Cash on Delivery (“COD”) returns are allowed. • After an RA number is iss ued, the defective Product must be packaged securely in the provided packing material, original or other suitable[...]