Daewoo DVQ 9H1FC инструкция обслуживания

INSTRUCTION MANUAL TV/VCR COMBINA TION DVQ 9H1FC[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intend- ed to alert the user to the presence of uninsulated “danger[...]

SAFETY PRECAUTIONS LOCATION For s afe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its instal- lation : • Never leave the TV/VCR in areas exposed to temperature extremes or strong direct sunlight. Leaving it in closed car, in direct sunlight, near a heater, etc. can cause deformation o[...]

SAFETY IMPORT ANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television equipment from the wall outlet before cleaning. Do no[...]

13 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or cir- cuits as contact with them might be fatal[...]

1 Table of Contents Table of Contents Preface : Your New TV/VCR 2 Features 2 Unpacking Your TV/VCR 3 Chapter 1 : Overview of Your Equipment 4 Your TV/VCR’s Front Panel 4 Your TV/VCR’s Back Panel 5 Your Remote Controller 6 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR 9 Connecting an Antenna 9 Connecting a Cable System 11 Connecting [...]

2 Preface : Your New TV/VCR PREF ACE Y our New TV/VCR Congratulations on your purchase of a new Daewoo TV/VCR. We hope you find that your new TV/VCR provides you with years of reliable performance. Your new TV/VCR is designed and engineered to provide you with the latest in features for your convenience. Listed below are just a few of the many feat[...]

3 Preface : Your New TV/VCR • Video Index Search System (VISS) This feature allows you to find index marks on your tape quickly. Your TV/VCR places index marks at the beginning of each new recording. • One Touch Recording (OTR) You can quickly begin recording and set the length of time to record using just one button. • 6 Events / 1 Month Tim[...]

4 Chapter 1 : Overview of Your Equipment CHAPTER 1 Overview of Y our Equipment Your TV/VCR’s comes with a remote control. The section below summarizes the buttons, controls, and terminals that will use with your TV/VCR’s. Y our TV/VCR's Front Panel Below you will find short description of the buttons and indicators on the front panel. Thes[...]

5 Chapter 1 : Overview of Your Equipment 11 PLAY button Press this button to begin normal palyback of the tape. 12 FF button (Fast Forward) Press this button to fast forward the tape. 13 STOP/EJECT button Press this button when the tape is moving to stop the tape. Press this button when the tape is stopped to eject it. 14 POWER button Press this bu[...]

Y our Remote Controller 1. POWER Press this button to turn your TV/VCR on or off. 2. RECALL Press this button to display the current time, the counter, channel number and other status items. 3. TV/LINE Press this button to select between viewing the signal coming from the antenna terminal (TV) or the signal coming from the A/V jack (LINE). 4. FAVOR[...]

7 Chapter 1 : Overview of Your Equipment 10. MENU Press this button to turn the TV/VCR’s menu system on and off. 11. 0-9 Press these buttons to change channels. 12. SPEED Press this button to select the SP, EP tape speed when the tape recording. 13. C- O STOP Press this button to find the counter zero. 14. 0(ATK) Press this button to automaticall[...]

8 Chapter 1 : Overview of Your Equipment Installing Y our Remote Control Batteries 1. Open the battery compartment on the back of the remote control. 2. Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3. Replace the cover. Notes Do not mix different types of batteries toget[...]

CHAPTER 2 9 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Connecting an Antenna or Cable to Y our TV/VCR Your TV/VCR will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connec[...]

10 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one anten- na for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads , you must obtain a com- biner (available [...]

11 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Connecting a Cable System If your cable set-up is not described below, please contact your cable company for more infor- mation. If your cable system does not require the use of a cable box, simply press or screw the incoming cable onto the antenna terminal on the back your TV. If your ca[...]

If your cable system only requires you to use a converter box for some channels (i. e. pay-TV channels) , follow these steps: Find the primary incoming coaxial cable. Plug this cable into a splitter (available at your local electronics store). Connect one coaxial cable between one OUT terminal on the splitter and the IN terminal on the converter bo[...]

13 Chapter 3 : Operating Your TV CHAPTER 3 Operating Y our TV Once you have connected your TV/VCR to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV/VCR so it memorizes all of available channels. T urning Y our TV/VCR On 1. To turn your TV/[...]

14 Chapter 3 : Operating Your TV Changing Channels You can change channels in three ways: 1. The x x CH y y buttons will take you through all memorized channels, one by one. The x x CH y y buttons will not access chan- nels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the [...]

15 Chapter 3 : Operating Your TV Changing the TV/VCR's Channel Memory Your TV/VCR's memory determines the channels that are available using the x x CH y y but- tons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it wit[...]

16 Chapter 3 : Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1. With the TV/VCR on, press the MENU button, then “Video” menu will appear. 2. The “Settings” item will be selected. Use the C VOL B buttons to[...]

17 Chapter 3 : Operating Your TV Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1. With the TV/VCR on, press the MENU button, then “Video” menu will appear. 2. Press the C VOL B buttons to set the “Settings” to ‘Preset’. The TV/VC[...]

18 Chapter 4 : Operating Your VCR CHAPTER 4 Operating Y our VCR Your TV/VCR has built-in VCR playback and recording capabilities, offering the ultimate in VCR convenience. This chapter explains the basic of using the VCR features of your unit. Video Cassette T apes Your VCR uses VHS tapes. Only use tapes that have the official VHS mark: Tape length[...]

19 Chapter 4 : Operating Your VCR Playing a T ape 1. To begin playing a tape, place it in the TV/VCR’s cassette compartment. If the erasure pre- vention tab has been removed, the tape will begin playing automatically. If the erasure pre- vention tab is intact, press the PLAY button on the front panel or on the remote control. 2. To pause the tape[...]

20 Chapter 4 : Operating Your VCR Tracking “Tracking” is a term that describes how the TV/VCR “locks on” to the signal recorded on the tape. If the TV/VCR is not tracking correctly, the picture during playback will be jumpy and distorted. Your TV/VCR is equipped with a sophisticated automatic tracking feature that can perfectly track a tape[...]

21 Chapter 4 : Operating Your VCR You cannot change channels while you are recording. To change channels, press PAUSE/STILL or STOP/EJECT to interrupt your recording. If the tape reaches its end while recording, it will quit recording and eject the tape. One T ouch Recording (OTR) One Touch Recording allows you to begin recording a channel, and als[...]

22 Chapter 4 : Operating Your VCR Displaying the TV/VCR ’ s Status during VCR Operation If you have a tape in the TV/VCR’s cassette compartment, you can display the following information. 1. Press the RECALL button. The current time, the current channel, the tape statue (STOP, PLAY, REC, etc.), the tape speed, and the tape counter will be displ[...]

23 Chapter 4 : Operating Your VCR Using the Counter (Zero Stop) The VCR counter can be used to keep track of your position on the tape. You can also use it to quickly return to a particular point on the tape. The counter cannot be displayed unless there is a cassette tape in the TV/VCR. 1. To display the counter, press the RECALL button until the c[...]

24 Chapter 5 : Using Timer Functions CHAPTER 5 Using Timer Functions Your TV/VCR has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock Automatically Your TV/VCR can automatically set its internal clock using a sig[...]

25 Chapter 5 : Using Timer Functions Setting the Clock Manually If you are unable or not interested in using the Auto Clock feature, you can set your TV/VCR’s clock manually. 1. With the TV turned on, press the MENU button until “Time” menu will be displayed. 2. The “Set Clock” item will be selected. Press the VOL B button once, then “M[...]

26 Chapter 5 : Using Timer Functions Setting the On Time If you enter a time in the “On Time” setting, your TV/VCR will automatically turn on at that time. Follow these instruction to set the “On Time” 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. Use the x CH y buttons to select “On Time” item. [...]

27 Chapter 5 : Using Timer Functions 4. Press the C VOL B buttons to select the time and minute, press the x CH y buttons to time setting. If you hold down either x CH or CH y button, the corresponding numbers will change more quickly. 5. When the clock is set correctly, press the C VOL B buttons to select “Off Time” and use the x CH y buttons [...]

28 Chapter 5 : Using Timer Functions Setting the Sleep T imer The sleep timer allows you to set an amount of time from 15 minutes to 2 hours. TV/VCR count down the amount of time you set, then turn itself off. To set the sleep timer: 1. With the TV turned on, press the MENU button until “Time” menu will be displayed. 2. Use the x CH y buttons t[...]

29 Chapter 6 : Additional TV Features CHAPTER 6 Additional TV Features This section contains descriptions of the more advanced features of your TV. Changing the Language of the On-Screen Menus You can choose to display the on-screen menus in English, French, Spanish. To change the on-screen language: 1. With the TV/VCR on, press the MENU button unt[...]

30 Chapter 6 : Additional TV Features CC on Mute With this function, user can select the caption display instead of sound mute when using the Mute button by neccessity. This function is only effective when Closed Caption is set to Off. 1. With the TV turned on, press the MENU button until “Special” menu will be displayed. 2. Use the x CH y butt[...]

31 Chapter 6 : Additional TV Features Parental Control Settings This item help parents to set the standard for the programs which their children are going to watch. 1. With the TV/VCR turned on, press the MENU button until “Special” menu will be displayed. 2. Use the x CH y buttons to select “Parental Control” item. 3. Use the VOL B button [...]

32 Chapter 6 : Additional TV Features Description of Parental Control Settings 1. The Movie Ratings set the standard for movie, video, and other media excluding TV programs. Use the x CH y buttons to select, C VOL B buttons to adjust. 2. The TV Guidelines set the standard for TV programs excluding sports and news. Use the x CH y buttons to select, [...]

33 Chapter 6 : Additional TV Features Mini Glossary MOVIE RATING SYSTEM X NC-17 R PG-13 PG G NR Hard Core Films Restrictd viewing Restrictd viewing Parental Guidance Suggested Parental Guidance Suggested General Audience Not Rated Not for children under age 17 under any circumstance. Strong sexual content. Same as X rating. Not for children under a[...]

34 Chapter 7 : Additional VCR Features CHAPTER 7 Additional VCR Features Programming to Record at a Later T ime One of the most convenient features of your new TV/VCR is the ability to record programs when you are not home. Your TV/VCR can be set to record up to six different programs at any time up to a month from now. Getting ready Before program[...]

35 Chapter 7 : Additional VCR Features Setting the Program Recording Here’s an example of how to record a program broadcast on channel 26 from 8:00 PM to 9:00 PM Friday, 6th of February 1999, in EP mode. 1. With the TV/VCR turned on, press the MENU button until “Program” menu will be dis- played. 2. Press the VOL B button, then the today’s [...]

Chapter 7 : Additional VCR Features 36 10. Press the VOL B button, then the cursor( B ) appears at the left margin 11. When you want to set other program, the CH y button to move the cursor( B ) to next line, then repeat step 2 through 10. 12. Press MENU to Exit the “Program” menu. 13. Press POWER to turn off the TV/VCR. The REC lamp on the fro[...]

37 Chapter 7 : Additional VCR Features Canceling the Program Record Settings 1. With the TV/VCR turn on, press the MENU button until “Program” menu will be dis- played. 2. Using the x CH y buttons select the Program setting which you want to stop recording and press the CANCEL button. 3. Press the MENU button to exit the “Program” menu. Sel[...]

38 Chapter 7 : Additional VCR Features Displaying the T ape Counter Press the RECALL button to display the tape counter. The tape counter shows the tape travel time in hours, minutes and seconds during recording or playback. Each time you press the RECALL button, the time counter and the remaining tape time counter appears alternately. When you use[...]

39 Chapter 7 : Additional VCR Features Auto Repeat PlayBack You can set your TV/VCR to play a tape continuously. When you turn this feature on and start playing a tape, it will play to the end of the tape, then rewind to the beginning and start play- ing again. This will continue until you turn Auto Repeat Off. 1. Press the MENU button until “Tap[...]

40 Chapter 7 : Additional VCR Features Index Search (VISS) Your TV/VCR is equipped with the VHS Index Search System, or VISS. The VISS allows “index marks” to be placed on a video tape. These marks are similar to bookmarks - you can use the search system to quickly find these marks, and thereby find a point on the tape quickly. Your TV/VCR auto[...]

Duplicating a Video T ape Because your TV/VCR has audio and video inputs, it is easy to make a copy of a tape, if you have another VCR or Video Camera. Follow these instructions : 1. Connect a audio cable from the AUDIO OUT jack on the VCR to the AUDIO jack on the front of your TV/VCR. 2. Connect a video cable from the VIDEO OUT jack on the VCR to [...]

42 CHAPTER 8 T roubleshooting Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an authorized Daewoo service center. There is no picture or sound, or the T[...]

Servicing Should your TV/VCR stop working, do not try to repair it yourself. There are no user-service- able parts inside the unit. Turn the TV/VCR off, unplug the power cord, and take the unit to an authorized Daewoo repair center. Cabinet Cleaning To clean your TV/VCR, wipe it with a soft cloth that has been dampened with luke-warm water and wrun[...]

Warranty 44 W ARRANTY Daewoo Electronics Corporation of America warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the Company’s option) in exchange for any part of any unit of its manufacture which under normal installation, [...]

This instrument is listed by Underwriter ’ s Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire, casualty and electrical hazards. Daewoo Electronics Corporation of America 120 Chubb Avenue Lyndhurst, NJ 07071 For more information about this or other Daewoo products, please call 1-800-D[...]