Datalogic Scanning 1100I OEM инструкция обслуживания

Magellan TM 1100i OEM Pr esentation Omnidir ec tional Bar C ode Reader Integr a tion Manual[...]

Datalogic Scanning, Inc. 959 T err y Street Eugene, Oregon 974 02 USA T eleph one: (541) 6 83-5700 F ax: (541) 345- 7140 An Unpublished Work - All rights reserved. No par t of the contents of this do cumentation or the procedures described therein may be repr oduced or transmitted in any f orm or by any means without prior writt en permission of Da[...]

T able of C ont ents Overview ............ .......... ............. ........... .......... ............. .......... ............. .......... ........... ..... ..... 1-1 Resources in other docu ments .......... ............. ............ ............. ............. ............ ............. ........ 1-1 Unpacking the Scanner .......... ............[...]

NO TES Magellan ® 1100i OEM i-2[...]

Secti on 1 Intr oduc tion This document gives instruction, mechanical deta ils, and design considerations to inte- grate the Magellan 1100i OEM model (designate d as “ scanner ” or “OEM scanner” in this manual) specifically into equip ment-integrated scanning applications. Ov er vi ew The OEM scanner is a compact, decoded, om ni-directional[...]

Introduction Unpacking the S canner The scanner is shipped in custom packaging. Carefully open the package, and inspect for the following: • scanner • power supply (if or dered) • interface cable (if ordered) If any parts are damaged or you need additional har dware, please contact T echnical Suppor t . Scanner Care The scanner contains sensi[...]

Secti on 2 Mounting the Scanner This section describes how to design the mounting for optimum scanner performance. General C onsider ations A typical system uses the sca nner mounted inside a host encl osure, with an opening for the scanning pattern to exit and read bar code s. The opening should be the size of the scanner window at a minimum, but [...]

Mounting the Scanner Cab le R ou ti ng The mounting design should also take into consideration the clea rances needed for the interface cable. This cable should be routed internal to the host enclosure as much as possible. I t is recommended to use a flat cable or round cable without a large strain r elief so that the cable can be routed away from [...]

Design of the Scanner Opening Second, the scanner must be positioned so that the scan volume and illumination light will cov er the entire bar code. The scan volume is shown in Figu re 2-2 . The combina- tion of the Scan V olume and the illumination light is called the F ield of View . Design- ing around the scanner F ield of View is explained more[...]

Mounting the Scanner Integra ting the Sc anner Behind a W indow It is not recommended to place any type of additional wi ndow between the scanner and the bar code to be read. The addition of a host encl osure windo w will significantly degrade scanner performance. This is due to the additional op tical reflective surfaces that will cause interfer -[...]

Appendix A T echnical Specificat ions Optical and Read P er formanc e Par ameters Pa rameter Specification Scan V olume 1147 cm 3 / 70 in 3 Scan P attern 136 scan lines Scan Rate 1760 Digital Scan Lines/second Minimum Resolution 5 mil Depth of Field (100% UPC Labels) Code Size Depth of Field 5 mil 25.4 - 57.2mm / 1.0 - 2.25” 7.5 mil 12.7 - 69.9mm[...]

Technical Specifications Environ ment al Para meter s Pa rameter Specification Mechanical Shock Multi 1.0m drops Contaminants W ater and Dust IP52 T emperature Ranges: Operating Storage 32  F to +122  F (0  C to +50  C) -104  F to +158  F (-40  C to + 70  C) Ambient Light Indoor 0 - 6000 lux Ambient Light Outdoor 0 - 86,100 [...]

Appendix B Mechanical Specifications Ph y sical Proper ties Pa rameter Specification Dimensions 86.4 mm x 71.1 mm x 66.0 mm ( 3.4” x 2.8” x 2.6”) W eight ~ 198 g / 7.0 oz. Scanner Dimensions Integration Manual B-1[...]

Mechanical Specifications Clearanc e Required f or Integration Magellan ® 1100i OEM B-2[...]

[...]

Aus tral ia Datalogic Scanning Pty Ltd T elephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Fr ance and Benelux Datalogic Scanning SAS T elephone: [33].0 1.64.86.71.00 france.scanning@datalogic.com Ger man y Datalogic Scanning GmbH T elephone: 49 (0) 61 51/93 58-0 germany .scanning@datalogic.com Indi a Datalogic Scanning India T elephone[...]