Dell P2210 инструкция обслуживания

Dell™P2210FlatPanelMonitorUser'sGuide Notes, Notices, and Cautions  Information in this document is subject to change without notice. © 2009 - 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trade[...]

Back to Contents Page  About Your Monitor Dell™P2210FlatPanelMonitorUser'sGuide Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. Package Contents Product Features Identifying Parts and Controls Monitor Specifica[...]

 Product Features The P2210 flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 22 - inch (558.68 mm) viewable area display (Measured diagonally). ■ 1680 x 1050 resolution, plus full - screen support for lower resolutions. ■ Wide viewing angle to allow viewing[...]

 Back View  Front View Front panel controls Label Description 1 Preset Modes (default, but configurable) 2 Brightness & Contrast (default, but configurable) 3 Menu 4 Exit 5 Power (with power light indicator) Back view Back view with monitor stand Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached base plate) Wa[...]

Label Card View  Side View NOTE: Monitor shipped with label card fully inserted in USB compartment. Pull out the label card to access the barcode serial number label and regulatory rating label. Back View with label card pulled out Front View with label card pulled out Label Description Use 1 Regulatory label Lists the regulatory approvals. 2[...]

 Bottom View  Monitor Specifications Flat Panel Specifications Left view R ight view Label Description Use 1 USB downstream ports Connect your USB devices. 2 Label card Provide clean monitor back view when reference to labels is not required. Bottom view Bottom view with monitor stand Label Description Use 1 AC power cord connector Connect th[...]

*[P2210] color gamut (typical) is based on CIE1976 ( 83% ) and CIE1931 (72%) test standards. Resolution Specifications Supported Video Modes Preset Display Modes Electrical Specifications Screen dimensions 22 inches (22 - inch viewable image size) Preset display area: 473.76(H)X296.1(V) Horizontal 473.76 mm (18.7 inches) Vertical 296.1 mm (11.7 inc[...]

Physical Characteristics Environmental Characteristics Power Management Modes IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorcanautomaticallyreduceitspowerconsumptionwhennotin use. This is referred to as Power Save Mode *. If the compute[...]

The OSD will only function in the normal operation mode. When any button is pressed in Active - off mode, one of the following messages will be displayed: Activate the computer and the monitor to gain access to the OSD. * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor. Pin Assignments VGA Co[...]

DisplayPort Connector Pin Number 24 - pin Side of th e C o nnected Signal Cable 1 TMDS RX2 - 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1 - 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Selftest 16 Hot Plug Detect 17 TMDS RX0 - 18 TMDS RX0+ 19 TMDS Ground 20 Floating [...]

Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are aut[...]

USB P orts l 1 upstream - back l 4 downstream - 2 on back; 2 on left side  LCD Monitor Quality and Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability.For more information on Dell Monito[...]

Back to Contents Page  Appendix Dell™P2210FlatPanelMonitorUser'sGuide  Safety Instructions  FCC Notice (U.S. Only) and Other Regulatory Information  Contacting Dell  WARNING: Safety Instructions For information on safety instructions, see the Product Information Guide . FCC Notices (U.S. Only) and Ot[...]

Back to Contents Page Setting Up Your Monitor Dell™P2210FlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard. 2. After[...]

Back to Contents Page Setting Up Your Monitor Dell™P2210FlatPanelMonitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard In Windows XP ® : 1. Right - click on the desktop and click Properties . 2. Select the Settings tab. 3. Select Advanced . 4. Identify your graphics controller supplie[...]

Back to Contents Page  Operating the Monitor Dell™P2210FlatPanelMonitorUser'sGuide  Using the Front Panel Controls  Using the On - Screen Display (OSD) Menu  Setting the Maximum Resolution  Using the Dell Soundbar (Optional)  Using the Tilt, Swivel, and Vertical Extension  Rotating the[...]

Using the On - Screen Display (OSD) Menu   Accessing the Menu System 1. Push the button to launch the OSD menu and display the main menu. Main Menu for analog (VGA) Input or Main Menu for digital (DVI) Input or Main Menu for display (DP) Input 5 Power (withpowerlight indicator) Use the Power button to turn the monitor on and off. [...]

2.  Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the followingtableforacompletelistofalltheoptionsavailableforthemonitor. 3.  Push the buttononcetoactivatethehighlightedoption. 4.  Push and b[...]

  NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration. NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector. Input Source Use the Input Source menu to select between different video signals that may be connected to your monitor.  Auto S elect Push to s[...]

l Cool : Decreases the color temperature. The screen appears cooler with a blue tint. l Custom (RGB) : Allows you to manually adjust the color settings. Press the and buttons to adjust the three colors (R, G, B) values and create your own preset color mode. When you select Video , you can choose Movie, Game, Sports, or Nature preset: l Movie : Load[...]

 Display Settings Use the Display Settings to adjust image.[...]

Back to Contents Page Setting Up Your Monitor Dell™P2210FlatPanelMonitor Setting the display resolution to 1680 x 1050 ( maximum) For maximum display performance with Microsoft ® Windows ® operating systems, set the display resolution to 1680 x 1050 pixels by performing the following steps: In Windows XP ® : 1. Right - click on [...]

Dell™P2210FlatPanelMonitor Information in this document is subject to change without notice. © 2009 - 2010DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo?[...]

Back to Contents Page  Setting Up the Monitor Dell™P2210FlatPanelMonitorUser'sGuide  Attaching the Stand  Connecting the Monitor  Organizing Your Cables  Attaching the Soundbar (optional)  Removing the Stand   Wall Mounting (Optional) Attaching the Stand To attach the monitor stand:[...]

2. Connect the white (digital DVI - D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the back ofyourcomputer.Donotusethethreecablesonthesamecomputer. Use all the cables only when they are connected to three different computers with appropriate video[...]

Connecting the USB cable After you have completed connecting the DVI/VGA /DP cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer. (See bottom view for details.) 2. Connect USB peripherals to the downs[...]

To attach the soundbar: Removing the Stand To remove the stand: 1. Place the monitor on a flat surface. 2. P ress and hold the Stand release button. 3. Lift the stand up and away from the monitor.  Wall Mounting (Optional) CAUTION: DonotusewithanydeviceotherthantheDellSoundbar. NOTE:  The soundbar power connec[...]

(Screw dimension: M4 x 10mm). Refer to the instructions that come with the VESA compatible base mounting kit. 1. Place the monitor panel on a soft cloth or cushion on stable flat table. 2. Remove the stand. 3. Use a screwdriver to remove the four screws securing the plastic cover. 4. Attach the mounting bracket from the wall mounting kit to the LCD[...]

Back to Contents Page  Troubleshooting Dell™P2210FlatPanelMonitorUser'sGuide  Self - Test  Built - in Diagnostics  Common Problems  Product Specific Problems  Universal Serial Bus Specific Problems  Dell Soundbar Problems  Self - Test Your monitor provides a self - test feature that[...]

To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the Button 1 and Button 4 on the front panel, simultaneously for 2 seconds. A gray screen ap[...]

Product Specific Problems Universal Serial Bus (USB) Specific Problems Dell™Soundbar Problems l Check for bent or broken pins in the video cable connector. Wrong Color Picture color not good l Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application. l Try different Color Preset Settings in Colo[...]

Back to Contents Page l Turn the Power/Volume knob on the Soundbar counter - clockwise to a lower volume setting. l Clean and reseat the audio line - in plug. Unbalanced Sound Output Sound from only one side of Soundbar l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line - in plug is completely inserted into th[...]