Denon AVR-2802/982 инструкция обслуживания

DVD START LEARNED/TX SURR.SP TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI OUTPUT SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTING MASTER VOL. VOLUME DISC SKIP+ SYSTEM CALL POWER VDP TUNER SHIFT TV/DBS V.AUX PHONO VCR-1 CD CDR / TAPE CHANNEL V[...]

ENGLISH 2 2 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the p[...]

3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.[...]

ENGLISH 4 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON A VR-2802/982 Digital Surround A / V receiver . This remarkable component has been engineered to provide superb surround sound listening with A V theater sources such as DVD, as well as providing outstanding high fidelity reproductio n of your favorite music sources. As this pr[...]

ENGLIS 5 3 CAUTIONS ON HANDLING 4 FEA TURES • Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PRE OUT j[...]

ENGLISH 6 R L R L R INPUT OUTPUT LR L R OUTPUT L R L INPUT OPTICAL COAXIAL OUTPUT OPTICAL L R L R L R L R OUTPUT DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO B B 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with r[...]

ENGLIS 7 IN VIDEO R L R OUT IN AUDIO VIDEO OUT IN LRL R L R L R OUT IN AUDIO VIDEO OUT IN LRL R L R L R OUT VIDEO OUT L AUDIO L R R OUT VIDEO OUT L AUDIO L R R L R L R L R L RL B B Connecting video components • T o connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Using an improper cable can result in a drop in video[...]

ENGLISH 8 IN S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT IN S-VIDEO OUT IN S-VIDEO B B Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components. • A note on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each [...]

ENGLIS 9 Y C R C B VIDEO OUT Y C R C B COMPONENT VIDEO IN COMPONENT B Connecting a Video Component Equipped with Color Difference (Component - Y , P R /C R , P B /C B ) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) vid[...]

ENGLISH 10 Connecting the antenna terminals DIRECTION OF BROADCASTING ST A TION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA (Supplied) AM LOOP ANTENNA (Supplied) AM OUTDOOR ANTENNA GROUND • An F-type FM antenna cable plug can be connected directly . AM loop antenna assembly Connect to the AM antenna terminals. Remove the vinyl tie and[...]

ENGLIS 11 R L B L R L R Connecting the external input (EXT . IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder , or a component with a different type of multi-channel decoder , such as a DVD Audio player , or a multi-channel SACD player , or other future multi-channel sound format decoder . • When ma[...]

ENGLISH 12 Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( ≈ with ≈ , √ with √ ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. • When making [...]

ENGLIS 13 ( L ) ( L ) ( R ) ( R ) ( L ) ( R ) ( L ) ( R ) L R B Connections • When making connections, also refer to the operating instructions of the other components. Connection jack for subwoofer with built-in amplifier (super woofer), etc. FRONT SPEAKER SYSTEMS (A) CENTER SPEAKER SYSTEM SURROUND BACK SPEAKER SYSTEMS FRONT SPEAKER SYSTEMS (B) [...]

ENGLISH 14 6 P AR T NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). AVR-2802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON / STANDBY REMOTE SENSOR FUNCTION AUTO PCM DTS SIGNAL [...]

ENGLIS 15 DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH/6CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTING MASTER VOL. VOLUME DISC SKIP+ SYSTEM CALL POWER VDP TUNER SHIFT TV/DBS PHONO VCR-1 CD CHANNEL VCR-2/V.AUX T[...]

ENGLISH 16 TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI RETURN DVD SET UP STATUS DISPLAY ON SCREEN MUTING AVR/AVC VIDEO DVD TV AUDIO VDP VCR CD MULTI CDR/MD TAPE SYSTEM SETUP SURROUND PARAMETER CH SELECT SELECT ENTER 7 SETTING UP THE SYSTEM • Once all connections with other A V components have been completed as described in “[...]

ENGLIS 17 • Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of seven speaker systems and a television monitor: Subwoofer Center speaker system Surround speaker systems Surround back speaker systems Front speaker systems Set these at the sides of the TV or screen with their fron[...]

ENGLISH 18 3 Set whether or not speakers are connected and, if so, their size parameters. • T o select the speaker • T o select the parameter 4 ENTER Press the ENTER button to finalize the setting. NOTE: • Select “ Large ” or “ Small ” not according to the actual size of the speaker but according to the speaker ’ s capacity for play[...]

ENGLIS 19 Setting the Crossover Frequency and Subwoofer mode 1 3 ENTER Select the “ Crossover Frequency ” mode. Enter the setting. The System Setup Menu reappears. This screen is not displayed when not using a subwoofer . • Set the crossover frequency and subwoofer mode according to the speaker system being used. Select the frequency . 2 Sele[...]

ENGLISH 20 Setting the SB CH Auto Flag Detect Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes. 1 At the System Setup Menu select “ SB CH Auto Flag Detect ” and press the ENTER button. ENTER 2 Select the desired setting. We recommend setting this to “ OFF ” . When set to “ ON ” , then [...]

ENGLIS 21 Setting the delay time 1 At the System Setup Menu select “ Delay T ime ” . • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. • The delay time can be set separately for surround speakers A and B. Preparations: Measure the distances between the listening posit[...]

ENGLISH 22 6 Set the distance between the center speaker and listening position. The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance. If “ Ye s ” is selected for “ Default ” , the settings are automatically reset to the default values. Please note that the d[...]

ENGLIS 23 4 Select the mode. Select “ Auto ” or “ Manual ” . • Auto: Adjust the level while listening to the test tones produced automatically from the different speakers. • Manual: Select the speaker from which you want to produce the test tone to adjust the level. Example: When the “ Auto ” mode is selected 5 6 Select “ T est T [...]

ENGLISH 24 When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect ALL surround modes. Consider this mode a Master Channel Level adjustment mode. After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust [...]

ENGLIS 25 Setting the on-screen display (OSD) • Use this to turn the on-screen display (messages other than the menu screens) on or off. 1 At the System Setup Menu select “ On Screen Display ” . 2 3 4 ENTER ENTER Switch to the On Screen Display screen. Select “ ON ” or “ OFF ” . Enter the setting. The System Setup Menu reappears. Auto[...]

ENGLISH 26 After completing system setup This button can be pressed at any time during the system setup process to complete the process. TITLE SYSTEM SETUP 1 At the System Setup Menu, press the SYSTEM SETUP button. The changed settings are entered and the on-screen display turns off. • On-screen display signals Signals input to the A VR-2802/982 [...]

ENGLIS 27 8 REMOTE CONTROL UNIT • The included remote control unit (RC-903) can be used to operate not only the A VR-2802/982 but other remote control compatible DENON components as well. Furthermore, it is equipped with a function for learning the control signals of remote control units of oth er manufacturers, so it can also be used to operate [...]

ENGLISH 28 Operating DENON audio components • T urn on the power of the different components before operating them. 1 2 3 Set mode switch 1 to “ AUDIO (A VR/A VC) ” . Set mode switch 2 to the position for the component to be operated. Operate the audio component. • For details, refer to the component ’ s operating instructions. While this[...]

ENGLIS 29 Preset memory (Audio component) • DENON components can be operated by setting the preset memory for CDR or MD. Operation is not possible for some models, however . In this case use the learning function (see page 32) to store the remote control signals. • For instructions on clearing the presettings stored in the preset memory , see p[...]

ENGLISH 30 HIT ACHI A — — “ VCR ” (DIRECT) MITSUBISHI A P ANASONIC A JVC (VICTOR) A SONY A PIONEER TOSHIBA A SANYO A SHARP A NEC A PHILIPS A RCA A GENERAL ELECTRIC A MAGNA VOX A (STEREO) — HIT ACHI B MITSUBISHI B P ANASONIC B JVC (VICTOR) B SONY B — TOSHIBA B SANYO B SHARP B NEC B PHILIPS B RCA B GENERAL ELECTRIC B MAGNA VOX B (EXT . IN[...]

ENGLIS 31 Operating a video component stored in the preset memory 1 Set the slide switch to “ VIDEO ” . AVR/AVC VIDEO AUDIO 2 Set the slide switch to the component to be registered (DVD, VDP , VCR or TV). DVD TV VDP VCR CD MULTI CDR/MD TAPE DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP R[...]

ENGLISH 32 Learning function • If your A V component is not a DENON product or it cannot be operated with the preset memory codesets, you can “ teach ” the A VR-2802/982 ’ s remote control to “ learn ” the codes from the component ’ s original remote control. • The buttons that can be “ learned ” are the CD, T APE and CDR/MD sys[...]

ENGLIS 33 System call function • The included remote control unit is equipped with a system call function for transmitting multiple remote control signals when a single button is pressed (this is often referred to as a “ macro ” function). This function can be used to turn on the amplifier ’ s power , select the input source, turn on the mo[...]

ENGLISH 34 (3) Storing signals (4) Clearing system call settings DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTING MASTER VOL. VOLUME DISC SKIP+ SYSTEM CALL POWER VD[...]

ENGLIS 35 Clearing “ learned ” remote control signals 1 Press the USE/LEARN selector button with the tip of a pen, etc., to set the learn mode. DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO STEREO[...]

ENGLISH 36 1 13 5 2 VOLUME LEVEL AUTO LOCK STAND BY DIGITAL PCM SIGNAL DIGITAL INPUT REMOTE SENSOR B Playing the input source 1 Select the input source to be played. FUNCTION Example: CD CD 8 (Main unit) (Remote control unit) T o select the input source when REC /MUL TI OUT or TUNING PRESET is selected, press the SOURCE button then operate the inpu[...]

ENGLIS 37 SIGNAL DIGITAL DIGITAL DIGITAL SIGNAL SIGNAL ANALOG DIGIT AL DIGIT AL DIGIT AL ANALOG AUTO INPUT PCM DTS AUTO INPUT PCM DTS AUTO INPUT PCM DTS AUTO INPUT PCM DTS 3 Select the play mode. Press the SURROUND MODE button, then turn the SELECT knob. Example: Stereo SURROUND MODE STEREO (Main unit) (Remote control unit) 4 Start playback on the [...]

ENGLISH 38 Playback using the external input (EXT . IN) jacks 1 Set the external input (EXT . IN) mode. Press the EXT . IN to switch the external input. EXT.IN EXT.IN (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL (front left), FR (front right) and C (center) channels of the EXT . IN jacks are output [...]

ENGLIS 39 NOTE: T o prevent hearing loss, do not raise the volume level excessively when using headphones. [3] T urning the sound off temporarily (muting) 1 Use this to turn off the audio output temporarily . Press the MUTING button. Cancelling MUTING mode. • Press the MUTING button again. MUTING VOLUME LEVEL AUTO LOCK STAND BY DIGITAL PCM SIGNAL[...]

ENGLISH 40 Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MUL TI button. REC / MULTI 2 With “ RECOUT SOURCE ” displayed, turn the FUNCTION knob to select the source you wish to record. • The “ REC ” indicator and the indicator of the selected source light. FUNCTION 3 Set the r[...]

ENGLIS 41 [3] Remote control unit operations during multi-source playback (selecting the source) 1 Set the slide switch to “ AUDIO ” and “ MUL TI ” . AVR/AVC VIDEO AUDIO DVD TV VDP VCR CD MULTI CDR/MD TAPE 2 Press the input source button. The multi source switches directly . The remote control unit ’ s MUL TI button can be operated at pos[...]

ENGLISH 42 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 22) or from the remote control unit, as described below . • Adjusting with the remo[...]

ENGLIS 43 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) toget her . Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select “ FADER ” . CH VOL CH SELECT ENTER (Main unit) (R[...]

ENGLISH 44 NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The A VR-2802/982 sets the mode automatically according to the types of speakers set during the system setup process (page 17). 3 Set the surround parameter mode. SURROUND PARAMETER MENU/GUIDE SURROUND PARAMETER (Main unit) (Remote control unit)[...]

ENGLIS 45 Dolby Digital mode (only with digital input) and DTS Surround mode (only with digital input) 1 Select the input source. Playback with a digital input q Select an input source set to digital (COAXIAL/OPTICAL). (see page 24). FUNCTION VDP 2 (Main unit) (Remote control unit) w Set the input mode to “ AUTO ” or “ DTS ” . INPUT MODE IN[...]

ENGLISH 46 4 Display the surround parameter menu. MENU/GUIDE SURROUND PARAMETER (Remote control unit) SURROUND PARAMETER (Main unit) 5 Select the various parameters. SURROUND PARAMETER 6 (Remote control unit) (Main unit) SELECT (Remote control unit) (Main unit) Adjust the parameter settings. Surround parameters w CINEMA EQ. (Cinema Equalizer): The [...]

ENGLIS 47 11 DSP SURROUND SIMULA TION • The A VR-2802/982 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of six preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions[...]

ENGLISH 48 DSP surround simulation 1 Select the surround mode for the input channel. • T o operate the surround mode and surround parameters from the remote control unit. The surround mode switches in the following order each time the DSP SIMULA TION button is pressed: DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO STEREO 1 MONO MOVI[...]

ENGLIS 49 VOLUME LEVEL AUTO LOCK STAND BY DIGITAL PCM SIGNAL DIGITAL INPUT REMOTE SENSOR B 2 1 1,3 • Operating the surround mode and surround parameters from the main unit ‘ s panel. 1 T urn the SELECT knob to select the surround mode. SELECT • When turned clockwise 1 DIRECT 1 STEREO 1 DOLBY PRO LOGIC II 1 DTS NEO:6 1 5/6CH STEREO 0 MA TRIX 0[...]

ENGLISH 50 T one control setting • Use the tone control setting to adjust the bass and treble as desired. • T o operate the tone control from the remote control unit. 1 Display the surround parameter screen on the monitor . The screen for the selected surround mode appears. “ TONE ” cannot be selected in the Direct mode. MENU/GUIDE SURROUND[...]

ENGLIS 51 Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because t[...]

C C C C C E E C C C C C C ENGLISH 52 C C E E E E C E E E E E E 2 Surround modes and parameters C : Signal E : No signal B : T urned on or off by speaker configuration setting C : Adjustable E : Not adjustable C : Able E : Unable Channel output FRONT L/R CENTER SURROUND L/R SUB- WOOFER SURROUND BACK L/R DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC I[...]

ENGLIS 53 Manual tuning 1 Set the input function to “ TUNER ” . 2 Watching the display , press the BAND button to select the desired band (AM or FM). BAND 3 Press the MODE button to set the manual tuning mode. Check that the display ’ s “ AUTO ” indicator turns off. MODE 4 Press the TUNING UP or DOWN button to tune in the desired station.[...]

ENGLISH 54 Checking the preset stations 1 Use the “ Auto tuning ” or “ Manual tuning ” operation to tune in the station to be preset in the memory . 2 Press the MEMORY button. MEMORY 3 SHIFT Press the SHIFT button and select the desired memory block (A to E). 4 CHANNEL Press the CHANNEL + (UP) or – (DOWN) button to select the desired pres[...]

ENGLIS 55 Recalling preset stations • T o call out out preset stations from the remote control unit. 1 Watching the display , press the SHIFT button to select the preset memory block. SHIFT CHANNEL (Remote control unit) 2 Watching the display , press the CHANNEL + (UP) or – (DOWN) button to select the desired preset channel. (Remote control uni[...]

ENGLISH 56 15 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating property ? If this unit is not operating properly , check the items listed in the table below . [...]

ENGLIS 57 16 ADDITIONAL INFORMA TION Optimum surround sound for different sources There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 T ypes of multi-channel signals Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio C[...]

ENGLISH 58 Surround back speakers A 6.1-channel system is a conventional 5.1-channel system to which the “ surround back ” (SB) channel has been added. This makes it easy to achieve sound positioned directly behind the listener , something that was previously difficult with sources designed for conven tional multi surround speakers. In addition[...]

ENGLIS 59 • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation method (1). Using dipolar speakers for the sur[...]

ENGLISH 60 Surround The A VR-2802/982 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater . Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratori[...]

ENGLIS 61 DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems . DTS offers the same “ 5.1 ” playback channels as Dolby Digital (front left, front right and center , surround left and surround right) as well as the stereo 2-channel mode. The signals [...]

ENGLISH 62 DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibility with the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround impression and space expression thanks to furthe[...]

ENGLIS 63 System setup items and default values (set upon shipment from the factory) System setup Default settings q r t y u Speaker Configuration Subwoofer mode SB CH Auto Flag Detect Channel Level Digital In Assignment On Screen Display Auto T uner Presets Input the combination of speakers in your system and their corresponding sizes (SMALL for r[...]

ENGLISH 64 Surround modes and parameters C C C C C E E C C C C C C C C E E E E C E E E E E E C : Signal E : No signal B : T urned on or off by speaker configuration setting C : Adjustable E : Not adjustable C : Able E : Unable Channel output FRONT L/R CENTER SURROUND L/R SUB- WOOFER SURROUND BACK L/R DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC II [...]

ENGLIS 65 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Front: 90 W + 90 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 135 W + 135 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Center: 90 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T .H.D.) 135 W (6 Ω /ohms, 1 kHz with 0.7% T .H.D.) Surround: 90 W + 90 W (8 Ω /ohms, 20 Hz ~[...]

14-14, AKASAKA 4-CHOME, MINA TO-KU, TOKYO 107-8011, JAP AN T elephone: (03) 3584-8111 Printed in Japan 511 3799 009[...]

[...]

[...]

[...]

1 T T h h e e f f i i r r s s t t n n a a m m e e i i n n d d i i g g i i t t a a l l a a u u d d i i o o . . AVR-2802 System Setup Guide & Recommendations Be sure all components are properly connected, and that the Speakers are placed and w ired correctly to the A VR-2802 (and amplifier if setup for Surround EX/dts ES) before starting the Sy s[...]

2 SPEA KER CONFIGURA TION l These settings are extr emely crucial to the ov erall sound q uality and performance of the AVR-2802. Use the “ Lef t/Right” arrow keys to select siz e and the “Up/Dow n” arrow key s to select the speaker channel to adjust. l Your options for speaker sizes are ‘Large’, ‘Small’, or ‘None’. These settin[...]

3 DELA Y TIM E l This menu allows y ou to easily config ure the delay times for all the speakers, including the subwoofer, in the sy stem. W e sugg est you use a tape measure to help y ou be as accurate as possible. This i s a performance advantage over other receiver s that allow only center channel (front and/or rear) delay time adjustment. • U[...]

4 Use the “Up/D own” arr ows to raise/l ower the lev el from each channel, and use the “Left/Right” arrows to select the channel to adjust. Take your time! • W e recommend that once you have compl eted adjusting the lev els, to wri te down and secure, the levels for every channel. T his will help y ou to reset the system quickly to refere[...]