Digi NS9210 инструкция обслуживания

NS9210 Processor Module Hardware Reference 90001002_A August 2008[...]

©2008 Digi International Inc. All rights reserved. Digi, Digi International, the Digi logo, a Digi Inte rnational Company , Digi Ju mpStart Kit, ConnectCore, NET+, NET+OS and NET+W orks are trademarks or register ed trademarks of Digi International, Inc. in the United States and other countries worldwide. All other trademarks are the property of t[...]

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Customer support .................................... ..................................... ..... 7 Chapter 1: About the Module ............ ............. ..... 9 Features and functionality .........[...]

4 NS9210 Processor Module Hardwar e Reference GPIO multiplex table ...... ........ ....... ....... ........ ....... ........ ....... ....... ........ 28 External interrupts ........................ ..................................... ............... 32 Interfaces ................................... ............................................. 33[...]

. . . . . www .digiembedded.com 5 LEDs ................................ ....... ....... ........ ....... ........ ....... ....... ... 44 WLAN LED LE7 .................................. .............................. ................. 44 Power LEDs, LE3 and LE4 ...... ..................................... ......................... 44 User LEDs, LE5 [...]

6 NS9210 Processor Module Hardwar e Reference Power Jack, X24 .................... ..................................... ...................... 58 Ethernet interface ................. ..................................... ............... 58 RJ-45 pin allocation, X19 ................ ..................................... ............... 59 LEDs ....[...]

. . . . . www .digiembedded.com 7 This guide provides information about th e Digi NS9210 P rocessor Module embedded core module. Conventions used in this guide This table describes t he typographi c conventions used in this guide: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

8 ConnectCor e 9P 9215 Har dwar e Refer ence[...]

9 About the Module CHAPTER 1 T he NS9210 P rocessor Module i s part of the Conn ectCore embedded core processor module family . Built on leading Digi technology , the network-enabled ConnectCore 9P family pro vides a modular an d scalable core proc essor solution that significantly minimizes hardwa re and software design risk. This module combines [...]

10 NS9210 Processor Module Hardwar e Reference Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features and funct ionality  32-bit NET+ARM (ARM926EJ-S) RISC processor NS921 5 @ 150MHz  ARM9 core with memory management [...]

. . . . . www .digiembedded.com 11 Pinout legend: Ty p e X1 pinou t I Input O Output I/O Input or ou tput PP o w e r X1 pin number Type Module functional ity Usage on Development board Comments 1 P GND GND 2 P GND GND 3 I RSTIN# RSTIN# 10k pull-up o n module 4 O PWRGOOD PWRGOOD Output of the reset controller push pull with 4 70R current limiting re[...]

12 NS9210 Processor Module Hardwar e Reference Chapter 1 20 P GND GND 21 I/O D0 D0 Buffered Data - only active when either CS0# or CS2# is active NS9215 D[31:16] 22 I/O D1 D1 23 I/O D2 D2 24 I/O D3 D3 25 I/O D4 D4 26 I/O D5 D5 27 I/O D6 D6 28 I/O D7 D7 29 I/O D8 D8 30 I/O D9 D9 31 I/O D10 D10 32 I/O D11 D11 33 I/O D12 D12 34 I/O D13 D13 35 I/O D14 [...]

. . . . . www .digiembedded.com 13 51 O A13 A13 52 O A14 A14 53 O A15 A15 54 O A16 A16 55 O GND GND 56 O EXT_OE# EXT_OE# 57 O EXT_WE# EXT_WE# 58 O CSO# CSO# 59 O CS2# CS2# 60 O BLE# BLE# NS9215 BE2# 61 O BHE# BHE# NS9215 BE3# 62 I EXT_WAIT# EXT_WAIT# 10k pull-up on module 63 O BCLK BCLK Connected ov er a 22R resistor to NS9215 CLK_OUT1 pin 64 P GND[...]

14 NS9210 Processor Module Hardwar e Reference Chapter 1 78 P VRTC VRTC Back up Battery for RT C, for 3V cell. Can be left floating, if RTC backup not needed. 79 P VLIO VLIO Mobi le: Power from Li-Ion Battery (2 .5V-5.5V) Non-Mobile: connected to 3.3V 80 P GND GND X1 pin number Type Module functionality Usage on Development bo ard Comments[...]

. . . . . www .digiembedded.com 15 X2 pinou t X2 pin number Type Module functionality Usage on Development board Comments 1 P GND 2 P GND 3 I/O DCDA#/ DMA0_DONE/ PIC_0_GEN_IO[0] GPIO0/ SPI_EN (dup) 4I / O C T S A # / EIRQ0/ PIC_0_GEN_IO[1] GPIO1/ -reserved- 5I / O D S R A # / EIRQ1/ PIC_0_GEN_IO[2] GPIO2/ -reserved- 6 I/O RXDA/ DMA0_PDEN/ PIC_0_GEN[...]

16 NS9210 Processor Module Hardwar e Reference Chapter 1 10 I/O TXDA/ Timer8_In/ Timer7_Out/ GPIO7/ SPI_TX (dup) 11 I/O DCDC#/ DMA1_DONE/ Timer8_Out/ GPIO8/ SPIB_EN (dup)/ 12 I/O CTSC#/ I2C_SCK/ EIRQ0 (dup)/ GPIO9/ PIC_DBG_DATA_IN 13 I/O DSRC#/ QDCI/ EIRQ1 (dup) GPIO10/ PIC_DBG_CLK 14 I/O RXDC/ DMA1_DP/ EIRQ2 (dup)/ GPIO11/ SPI_RXboot 15 I/O RIC#/ [...]

. . . . . www .digiembedded.com 17 18 I/O TXDC/ Timer9_In/ PIC_0_CAN_TXD GPIO15/ SPI_ENboot 19 I/O DCDB# (dup)/ PIC_0_BUS_1[8] PIC_1_BUS_1[8] GPIO51/ 20 I/O CTSB# (dup)/ PIC_0_BUS_1[9] PIC_1_BUS_1[9] GPIO52/ 21 I/O DSRB# (dup)/ PIC_0_BUS_1[10 ] PIC_1_BUS_1[10 ] GPIO53/ 22 I/O RXDB (dup)/ PIC_0_BUS_1[11 ] PIC_1_BUS_1[11 ] GPIO54/ 23 I/O RIB# (dup) /[...]

18 NS9210 Processor Module Hardwar e Reference Chapter 1 27 I/O DCDD# (d up) / PIC_0_BUS_1[16] PIC_1_BUS_1[16] GPIO59/ 28 I/O CTSD# (du p)/ PIC_0_BUS_1[17] PIC_1_BUS_1[17] GPIO60/ 29 I/O DSRD# (d up)/ PIC_0_BUS_1[18] PIC_1_BUS_1[18] GPIO61/ 30 I/O RXDD (du p)/ PIC_0_BUS_1[19] PIC_1_BUS_1[19] GPIO62/ 31 I/O RID# (d up)/ PIC_0_BUS_1[20] PIC_1_BUS_1[2[...]

. . . . . www .digiembedded.com 19 37 I/O PIC_0_GEN_IO[1] PIC_1_GEN_IO[1] PIC_1_CAN_TXD GPIO69 38 I/O PIC_0_GEN_IO[2] PIC_1_GEN_IO[2] PWM0/ GPIO70 39 I/O PIC_0_GEN_IO[3] PIC_1_GEN_IO[3] PWM1/ GPIO71 40 I/O PIC_0_GEN_IO[4] PIC_1_GEN_IO[4] PWM2/ GPIO72 41 I/O PIC_0_GEN_IO[5] PIC_1_GEN_IO[5] PWM3/ GPIO73 42 I/O PIC_0_GEN_IO[6] PIC_1_GEN_IO[6] Timer0_I[...]

20 NS9210 Processor Module Hardwar e Reference Chapter 1 47 I/O PIC_0_CTL_IO [3] PIC_1_CTL_IO[3] Timer5_In/ GPIO79 48 I/O PIC_0_BUS_ 0[0] PIC_1_BUS_0[0] Timer6_In (dup)/ GPIO80 49 I/O PIC_0_BUS_ 0[1] PIC_1_BUS_0[1] Timer7_In (dup)/ GPIO81 50 I/O PIC_0_BUS_ 0[2] PIC_1_BUS_0[2] Timer8_In (dup)/ GPIO82 51 I/O PIC_0_BUS_ 0[3] PIC_1_BUS_0[3] Timer9_In ([...]

. . . . . www .digiembedded.com 21 57 I/O PIC_0_BUS_0[14 ]/ PIC_1_BUS_0[14 ]/ QDCI (dup)/ GPIO94 58 I/O PIC_0_BUS_0[15 ]/ PIC_1_BUS_0[15 ]/ QDCQ (dup)/ GPIO95 59 I/O PIC_0_BUS_1[0] / PIC_1_BUS_1[0] / PIC_0_CAN_R XD GPIO96 60 I/O PIC_0_BUS_1[1] / PIC_1_BUS_1[1] / PIC_0_CAN_TXD GPIO97 61 I/O PIC_0_BUS_1[2] / PIC_1_BUS_1[2] / PIC_1_CAN_R XD GPIO98 62 [...]

22 NS9210 Processor Module Hardwar e Reference Chapter 1 67 I VIN0_A DC 68 I VIN1_A DC 69 I VIN2_A DC 70 I VIN3_A DC 71 I VIN4_A DC 72 I VIN5_A DC 73 I VIN6_A DC 74 I VIN7_A DC 75 P VSS_ADC Connected on module to AGND through 0 Ω resistor 76 P VREF_ADC 100nF decoupling capacitor between VREF_ADC and VSS_ADC 77 P 3.3V 78 P 3.3V 79 P GND 80 P GND X[...]

. . . . . www .digiembedded.com 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration pins — CPU None of the 64 GPIO pins on connector X2 disturb CPU boot st rap fun ctions. The boot strap functions are controlled by addr[...]

24 NS9210 Processor Module Hardwar e Reference Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configuration pins — Module The NS9210 P rocessor Module supports the fo llowing JT AG signals: TCK, TMS, TDI, TDO, TRST#, and [...]

. . . . . www .digiembedded.com 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clock generation Clock frequencies Hardware strapping determines the initia l powerup PLL settings. The table below summarizes the default clock freque[...]

26 NS9210 Processor Module Hardwar e Reference Chapter 1 Changing t he CPU speed After powerup, software can change the PLL settings by writing to the PLL configuration register (@ 0xA090_0188) Important: When PLL param eters are changed, a reset is provided for the PLL to stabilize. Applications usin g this feature need to be aware the SDRAM conte[...]

. . . . . www .digiembedded.com 27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chip selects The module has eight chip selects: four for dynamic memory and four for static memory . Each chip select has a 256MB rang e. Chip select m[...]

28 NS9210 Processor Module Hardwar e Reference Chapter 1  UAR T  SPI  Ethernet  DMA  I 2 C port  T imers and interrupt inputs  Memory bus data Pin notes  GPIO [15:0] allow five multiplex modes.  GPIO [103:16] and GPIO_A [3:0] have four multiplex modes.  Using a pin as GPIO means always to give up other functio nalities[...]

. . . . . www .digiembedded.com 29 GPIO11 RXDC# DMA1_PDEN EIRQ2 (dup ) SPI_RXD (boot) RXDC GPIO12 RXCLKC / RIC# I2C_SDA RESET_DONE SPI_CLK (dup) RIC# 1 GPIO13 RXCLKC / RTSC# /485CTLC QDCQ R eserved SPI_CLK (boot) RXCLKC / RTSC# GPIO14 TXCLKC / DTRC# DMA1_REQ P IC_0_CAN_RXD SPI_TXD (boot) TXCLKC GPIO15 TXDC Timer9_In PIC_0_CAN_TXD SPI_EN# (boot) TXD[...]

30 NS9210 Processor Module Hardwar e Reference Chapter 1 GPIO31 D15 TXDD R eserved Reserved for uppe r data lines GPIO32 MII_MDC PIC_0_GEN_IO[0] Reserved MII Interface GPIO33 MII_TXC PIC_0_GEN_IO[1] Reserved MII Interface GPIO34 MII_RXC PIC_0_GEN_IO[2] Reserved MII Interface GPIO35 MII_MDIO PIC_0_GEN_IO[3] Reserved MII Interface GPIO36 MII_RXDV PIC[...]

. . . . . www .digiembedded.com 31 GPIO61 DSRD# (dup) PIC_0_B US_1[18] PIC_1_BUS_1[18] DSRD# GPIO62 RXDD (dup) PIC_0_BUS _1[19] PIC_1_B US_1[19] RXDD GPIO63 RID# (dup) PIC_0_B US_1[20] PIC_1_BUS_1[20] RID# GPIO64 RTSD# / 485CTLD (dup) PIC_0_BUS_1[21 ] PIC_1_BUS_1[21] RTSD# GPIO65 TXCLKD (dup) / DTRD# (dup) PIC_0_BUS_1[22] PI C_1_BUS_1[22] DTRD# GPI[...]

32 NS9210 Processor Module Hardwar e Reference Chapter 1 1 Put a series resistor on the baseboard in this cas e to avoid input/output conflict between RESET_ DONE (output/boot default) and RIC# (input/conf iguration default). External interrupts The NS9210 P rocessor Module provides acce ss to four external interrupts signals, which are multiplexe [...]

. . . . . www .digiembedded.com 33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Interfaces 10/100 Mbps Ethernet port The NS9215 10/100 Mbps Ethernet MAC allows a glueless connection of a 3.3V MII PHY chip that generates the ph ysic[...]

34 NS9210 Processor Module Hardwar e Reference Chapter 1  Master: 33.33 Mbps  Slave: 7.50 Mbps The SPI module is made of four signals: RXD, TXD, CLK and CS# I 2 C bus The I 2 C b u s i s co m p l e t e l y f r e e o n t h e m od ul e - n o E E P R O M a n d n o RT C - s i n ce th e RTC is in the processor . The I²C clock is max 400kHz. I2C s[...]

35 About the Development Board CHAPTER 2 T he NS9210 P rocessor Module Development board supports the NS9210 P rocessor Module. This chapter de sc ribes the components of the development board and explains how to configure the board for you r requirements. The developm ent board has tw o 4x20 pin co nnectors that are 1:1 copies of the module pins. [...]

36 NS9210 Processor Module Hardwar e Reference Chapter 2  +9/30VDC power supply  Current measurement option  Development board + Module, and mod ule alone  3.3V coincell battery with sock et  P oE connectors for optional application kit (IEEE 802 .3 af)  P rototyping area (15 x 28 holes) with +3.3V and G ND connections[...]

. . . . . www .digiembedded.com 37 The develop ment board[...]

38 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User interface The NS9210 P rocessor Module Development board impleme nts two user buttons and two user LEDs in addition to those[...]

. . . . . www .digiembedded.com 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switches and pushbuttons Reset control, S3 The reset pushb utton, S3, resets the module. On the module, RST OUT# and PWRGOOD are produced for periphera[...]

40 NS9210 Processor Module Hardwar e Reference Chapter 2 User pushbutt ons, S6 and S7 U se the user pushbuttons to interact with the applications ru nning on the NS9210 P rocessor Module. Use these mod ul e si gnals to implement the pushbuttons: Legend for multi- pin switche s Switches 1 and 4 are multi-pin switches. In the description tables for t[...]

. . . . . www .digiembedded.com 41 Serial Port B MEI configuration switches, S1 Use S1 to configure the line in terface for serial port B MEI: Switch pin Function Comments S1.1 O n = RS232 tran sceiver en abled RS422/RS485 transceivers disabled Off = RS232 transceiver disabled RS422/RS485 transceivers enabled S1.2 On = Auto Power Down enabled Off =[...]

42 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jumpers Batte ry Ju mp e r J 2 Serial Port D transcei ver Jumper J1 User LED1 Jumper J5 User LED2 Jumper J4 WLAN Jum per J3[...]

. . . . . www .digiembedded.com 43 Jumper functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery and Battery Holder Jump er Name If connection made Default J1 Enable transceiver This jumper allows to disable the console RS [...]

44 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LEDs WLAN LED LE7 R eserved for future use. Power LEDs, LE3 and LE4 The power LEDs are all red LEDs. Thes e po wer supplies must [...]

. . . . . www .digiembedded.com 45 Serial status LEDs The development boa rd has two sets of se rial port LEDs — four for serial port D and eight for serial port B. The LEDs are co nnected to the TTL side of the RS232 or RS422/485 transceivers.  Green means corresponding signal high.  Re d means corresponding signal low .  The intensi ty[...]

46 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial UART ports The development board supports the four serial ports available on the NS9210 P rocessor Module. Serial port D, [...]

. . . . . www .digiembedded.com 47 Serial port D pins are allocated as shown: By default, Serial D signals are config ured to their respective GPIO signals. It is the responsibility of the dr iver to configure them properly . Serial port A TTL interface The serial (UART) port A interface is a TTL interface connected to a 2x5 pin, 0.1” connector ,[...]

48 NS9210 Processor Module Hardwar e Reference Chapter 2 Serial port C TTL interface The serial (UAR T) port C interface is a TT L interface connected to a 2x5 pin, 0.1” connector , X5. T he connector sup ports only TTL level. The serial port C interface corresponds to the NS9215 UAR T port C. The signals are shared with the HDLC interface. Seria[...]

. . . . . www .digiembedded.com 49 Serial port B, MEI interface T h e s e r i a l ( U A RT ) p o rt B co n n e c t o r , X6 , i s a D S U B 9 m a l e c o n ne ct o r . T h i s a s y n c h r o n o u s serial port is DTE and requires a null-mode m cable to connect to a computer serial port. The serial port B MEI (Multiple Electrical Interface) interf[...]

50 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I 2 C interface I 2 C header The I²C interface has only one device co nnected to the bus on the development board - an I/O expan[...]

. . . . . www .digiembedded.com 51 The I/O expander is a P hilips PCA9554D at I 2 C address 0x20 / 0x21. The pins are allocated as shown: Pin Signal 1I O _ 0 2I O _ 1 3I O _ 2 4I O _ 3 5I O _ 4 6I O _ 5 7I O _ 6 8I O _ 7 9G N D[...]

52 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPI interface The development board provides access to the SPI interface on the module using the SPI connector , X8. The SPI inte[...]

. . . . . www .digiembedded.com 53 Pin allocation SPI connector pins are allocated as shown: Pin Signal 1 +3.3V 2 TXDA/SPI_TXD/GPIO7 3 RXDA/SPI_RXD/GPIO3 4 RTSA#/SPI_CLK/GPIO5 5 DCDA#/SPI_EN#/GPIO0 6G N D[...]

54 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Current Measurement Option The Current Measurement Option uses 0.025R ohm series resistors to measure the current. The NS9210 P r[...]

. . . . . www .digiembedded.com 55 How the CMO works T o measure the load c urrent used on differe nt power supplies, me asure DC voltage across the sense (CMO) resistor . Th e value of the resistor is 0.025 R ± 1%. Calculate the current using this equation: I = U/R where  I = current in Amps  U = measured voltage in V olts  R = 0.025 Ohm[...]

56 NS9210 Processor Module Hardwar e Reference Chapter 2 S tandard JT AG ARM connector , X13 The standard JT AG ARM connector is a 20- pin header and can be used to connect development tools such as Digi’ s JT AG Link, ARM’ s Multi-ICE, Abatron BDI2000, and others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

. . . . . www .digiembedded.com 57 The PoE mod ule Plug in the P oE module at a right angle to the development board, as shown in t his drawing: PoE header, X9 PoE header, X26 Power Jack , X24 Jump Start dev elopmen t b o ard PoE module[...]

58 NS9210 Processor Module Hardwar e Reference Chapter 2 X9 This is how the P oE input connector pin s are allocated: X26 This is how the P oE output connector pins are allocated: POE_GND The development board provides access to POE_GND allowing it to be turned off when power is provided throug h P ower Jac k X2 6.4 and X26.5. Power Jack, X24 The p[...]

. . . . . www .digiembedded.com 59 RJ-45 pin allocation, X19 RJ-45 c onnector pins are co nfigured as shown: Eth e rne t R J -45 , X 1 9 Pin Signal 802.3af End -Span (mode A) 802.3a f Mid-Span (Mode B ) Description 1 TXD+ Negative V Po rt Transmit data + 2T X D - N e g a t i v e V Port Transmit data - 3 RXD+ Positive V Port Receive data + 4 EPWR+ P[...]

60 NS9210 Processor Module Hardwar e Reference Chapter 2 LEDs The RJ-45 connec tor has two LEDs locate d near the outer lower corners of the connector . These LEDs are not programmable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

. . . . . www .digiembedded.com 61 The development board provides one, 2x 25-pin, 0.10” (2.54mm) pitch header for supporting application- specific daughter cards/expansion boards:  X33, P eripheral application header . P rovides access to an 16-bit data bus, 10- bit address bus, and control signals (suc h as CE#, IRQ#, WE#), as well as I 2 C a[...]

62 NS9210 Processor Module Hardwar e Reference Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Module and test connectors The NS9210 P rocessor Module plugs into th e module co nn ectors X1 and X2 on the development board . [...]

. . . . . www .digiembedded.com 63 X10 pinout *USB signals are reserved for f uture use. X1 1 pinout X10 pin Signal X10 pin Signal A1 GND B1 GND A2 RSTOUT# B2 TCK A3 TDO B3 TRST# A4 LITTLE#/BIG_ENDIAN B4 WLAN_DISABLE# A5 SW_CONF2 B5 SW_CONF3 A6 BD0 B6 BD1 A7 BD4 B7 BD5 A8 BD8 B8 BD9 A9 BD12 B9 BD13 A10 GND B10 BA0 A11 BA3 B11 BA4 A12 BA7 B12 BA8 A1[...]

64 NS9210 Processor Module Hardwar e Reference Chapter 2 *USB signals are reserved for future use. X20 pinou t C10 BA1 D10 BA2 C11 BA5 D11 BA6 C12 BA9 D12 BA10 C13 BA13 D13 BA14 C14 GND D14 EXT_OE# C15 EXT_CS2# D15 BE2# C16 EXT_CLK D16 GND C17 (ETH_TPIP) NC D17 NC (ETH_LINK#) C18 GND D18 Reserved* C19 Reserved* D19 Reserved* C20 3.3V D20 GND X11 pi[...]

. . . . . www .digiembedded.com 65 X21 pinout A19 ADC_IN6 B19 ADC_IN7 A20 +3.3V B20 +3 .3V X20 pin Signal X20 pin Signal X21 pin Signal X21 pin Signal C1 DCDA#/SPI_EN/GPIO0 D1 CTSA#/GPIO1 C2 RIA#/EIRO2/GPIO4 D2 RTSA#/SPI_CLK/GPIO5 C3 DCDC#/TXCLKC /GPI O8 D3 CTSC#/GPIO9 C4 RIC#/RXCLKC/GPIO12 D4 RTSC#/R CLKC/GPIO13 C5 DCDB#/GPIO51 D5 CTSB#/GPIO52 C6 [...]

66 NS9210 Processor Module Hardwar e Reference Chapter 2[...]

67 Appendix A:Specifications T his appendix provides NS9210 P rocessor Mo dule and electrical specifications, as well as module and development bo ard mechanical specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Environm[...]

68 NS9210 Processor Module Hardwar e Reference A  Use a screwdriver and other t ools with insulated handles.  W ear safety glasses or goggles.  Installation of inside wiring may bring you close to electrical wire, conduit, terminals and other el ectrical facilities. Extreme caut ion must be used to avoid electrical shoc k from such facilit[...]

. . . . . www .digiembedded.com 69 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Typical module current / power measurements The following illustrates ty pical power consumption when all cl oc ks are active and the ethernet is conne[...]

70 NS9210 Processor Module Hardwar e Reference A Module, top view Note: Measurements are in millimet ers. Module, side view Note: Measurements are in millimet ers.[...]

. . . . . www .digiembedded.com 71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Layout recommendation Below are the mechanical dimensions of the standard NS9210 P rocessor Module. The layout of the NS9210 P rocessor Module JumpStar[...]

72 NS9210 Processor Module Hardwar e Reference A Device Berg/FCI connector NS9210 Processor Mo dule 61082-081409LF NS9210 Processor Module JumpStart board (mating con nector on the b ase board) 61083-084409LF[...]

. . . . . www .digiembedded.com 73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reset and edge sensitive input timing requirements The critical timing requirement is the rise an d fall time of the input. If the rise time is too slo[...]

74 NS9210 Processor Module Hardwar e Reference A[...]

75 Appendix B:Certifications T he NS9210 P rocessor Module product comp lies with the standards cited in this section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Part 15 Class B Radio Frequency Interface (RFI) (FCC 15.105) Th[...]

76 NS9210 Processor Module Hardwar e Reference B If the FCC ID is not visible when insta lled inside another device, then the outside of the device into which the module is instal led must also display a label referring to the enclosed module FCC ID. THis exte rior label can use wording such as the following: “Contains T ransmitter Mo dule FCC ID[...]

. . . . . www .digiembedded.com 77 Declaration of Conformity (In accordance with FCC Dockets 96-208 and 95-19) Digi International declares, that the pr oduct: to which this declarati on relates, meets the require ments specified by the F ederal Communi ca tions Co mmissio n as detailed in the follo wing sp ec ificati o ns:  P art 15, Subpart B, [...]

78 NS9210 Processor Module Hardwar e Reference B International EMC S tandards The NS9210 P rocessor Module m eets the following standards: Standards NS9210 P rocessor Module Emissions FCC Part 15 Subpart B ICES-003 Immunity EN 55022 EN 55024 Safety UL 60950-1 CSA C22.2, No. 60950-1 EN60950-1[...]

[...]

80 ConnectCor e 9P 9215 Har dwar e Refer ence[...]