Dixon 2301 инструкция обслуживания

[...]

IMPORTANT - READ CAREFULLY The Dixon ® ZTR ® , Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operator's manu al carefully, and become completely familiar with the controls. The information in this ope[...]

INDEX SAFETY.......................................................... ......Pages 1 - 6 WARRANTY POLICY ............................................ Page 7 SPECIFICATIONS ................................................ . Pages 8 SEAT ADJUSTMENT.............................................Page 9 CONTROLS................ ...........................[...]

RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SER IOUS INJURY OR DEATH The most common causes of injury to the operator or bystander... SAFETY BLADE CONTACT RUN - OVER TIP - OVER RUN - OVER Page 1[...]

SAFETY SYMBOLS: SAFETY ALERT SYMBOL - When you see this symbol, BE ALERT to the poten tial for injury. Follow recommended safety precautions and safe operating practices. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning indicates a potentially hazardous situation which, if not[...]

This cutting mower is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENER AL OPERATION: • Read, understand, and follow all instruction s in the manual and on the mower before starting. • Only allow responsible adults, who are familiar wit[...]

SLOPE OPERATION: Slopes are a major factor related to loss - of - control and tip - over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. DO Mow across the slope with your Dixon ZTR - never up or down. Remove obstacles such as rocks, [...]

CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attract ed to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. • Keep children out of the mowing area and under the watchful care of another responsible adult, • [...]

SERVICE: • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. U se only an approved container. Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. Never refuel the mower indoors. Never store the mower or fuel container inside a building where[...]

DIXON LIMITED WARRANTY POLICY -- MODEL ZTR 2301 This warranty policy applies to all 2301 mowers purchased on or after October 1,1993. WARRANTY: Dixon Warranty term is for a period of one (1) y ear from date of purchase or 200 hours of use, whichever occurs first. Mowers used for residential homeowner applications (used only at owner's primary [...]

SPECIFICATIONS The monocoque design chassis of the Model ZTR 2301 incorporates CMC laser and CNC brake processes to form the twin 12 gauge side frames and 7 gauge transmission and engine bas e plate. All body parts are made of rotational molded polyethylene. Front body contains access panel for battery service. Seat tilts forward to allow/transmiss[...]

SEAT ADJUSTMENT INSTRUCTIONS Model ZTR 2301 1. Raise and push seat assembly forward. 2. Loosen f ive nuts, P/N 3205, and slide seat forward or backward to desired position. 3. Re - tighten nuts, P/N 3205. DO NOT operate mower without seat adjustments properly tightened. 4. Push seat assembly back to closed position. Page 9[...]

CONTROLS Page 10[...]

CONTROLS The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning, speed, and direction. On initial operation, set throttle speed on slow and operate with mower blade "OFF". To avoid "over - controlling" the mower, use a light touch on the drive levers. Slight movements using fingertip[...]

TO GO FORWARD: From neutral position, gently push both drive levers forward. To increase speed, move levers farther for ward. TO GO BACKWARD: From neutral position, gently pull both drive levers toward you. TURNING: Turning is controlled by moving one drive lever slightly forward or rearward of the other. To turn left, move left lever rearward of t[...]

CONTROLS BLADE DRIVE: Located to left of operator. . To engage the mower blade, turn lever on fl oor slowly to the "ON" position. To disengage mower blade, turn lever to the "OFF" position. MOWER DECK CUT HEIGHT LIFT LEVER: Located to left of operator. Controls the cutting height. Seven positions of adjustment. Move lever in and[...]

OPERATION INSTRUCTIONS The safe and successful operation of the Model ZTR 2301 will depend upon the operator ha ving the correct knowledge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone to operate the mower without complete knowledge of all controls and their functions. During initial [...]

OPERATION INSTRUCTIONS PARKING BR AKE SWITCH TEST: With parking brake in the OFF position, engine should not turn over or attempt to start when the key switch is moved to the start position. BLADE DRIVE SWIT CH TEST: (Electric Clutch or Manual Drive) a. With either electric blade drive switch turned on, or manual lever turned forward, parking brake[...]

OPERATION INSTRUCTIONS START NG INSTRUCTIONS: 1. Move throttle control to "Choke" position if engine is cold, full throttle if warm. 2. Insert ignition key and turn to "Start" position. When engine starts, release ignition key. Key will return to "Run" position. 3. Move throttle from "Choke" to desired spee[...]

OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all of the recycled or mulched clippings. In order to achieve the best[...]

OPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT: In order to achieve optimum performance when mowing with a grass catching attachment, please read and follow the tips listed below. 1. Set engine speed control to the wide open or full setting. 2. D o Not Attempt To Cut Grass When It Is Wet. Wet grass will clog both the underside of the[...]

OPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS: In order to achieve optimum performance when side discharging the grass clippings, please read and follow the tips listed below. Additional information can be found in the troubleshooting guide on Page 28. Be sur e that deflector is properly installed on the discharge chute. 1. Set engine spee[...]

CARE AND MAINTENANCE - MODEL ZTR 2301 This portion of the Model ZTR 2301 owners manual deals with normal service items which can be performed by the owner. Please remember that if you are in doubt as to the correct service procedures to be followed, these and other service situations can be handled by a Dixon ZTR dealer who is familiar with the ser[...]

CARE AND MAINTEN ANCE - MODEL ZTR 2301 CUTTER BLADE MAINTENANCE: NOTE: Observe proper blade position prior to removal. 1. Safely raise front of mower. 2. Hold or block blade from turning. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade. NOTE: Be sure blade is centered on pilot before tightening bolt to 60 [...]

CARE AND MAINTENANCE - MODEL ZTR 2301 Manual Clutch: No Adjustment 1. Place cut height lever in lowest cut position. 2. Loosen belt keepers on each side of engine pulley. 3. Remove de ck drive belt from engine pulley. 4. Using a slight upward twisting motion, remove link from engagement handle. 5. Turn handle fully to the left until handle clears s[...]

CARE AND MAINTENANCE - MODEL ZTR 2301 FUEL SHUT OFF VALVE: The fuel shut off valve is located at the bottom rear of the fuel tank. Always turn the valve to the "OFF" position when the mower is stored or not in use. LUBRICATION: CHA SSIS: LOCATIONS: SERVICE INTERVALS: RECOMMENDED GREASE: Number of grease zerks used: (4) (1) each front whee[...]

CARE AND MAINTEN ANCE - MODEL Z TR 2301 HOT oil may cause burns. Allow engine to cool before draining oil. CHANGING THE ENGINE OIL: 1. The "snap lock" oil drain valve is located on the left side of the engine crank - case. 2. Place a suitable container under the drain valve . The fitting of a short piece of hose to the valve will help dir[...]

CARE AND MAINTENANCE - MODEL ZTR 2301 DRIVE SYSTEM ADJUSTMENTS: Due to both the complex nature of the transmission and the number of special tools required for service, adjustments should be entrusted to your dealer. There are a number of simple owner service items which greatly influence the performance of the drive system. 1. Front and rear tires[...]

CARE AND MAINTEN ANCE - MODEL ZTR 2301 Correct tire pressure is important for correct operation of mow er. Front Tires 410 X 350 X 4 Air Pressure 16 - 21 Ibs. Rear Tires 16 X 650 X 8 Air Pressure 8 - 14 Ibs. NOTE: Check lug nuts periodically for tightness. ELECTRICAL SYSTEMS: Keep all connections clean and tight. The serial number is located on fra[...]

STANDARD SERVICE PARTS LIST Standard: P/N 2483 Hi - Lift: P/N 2484 (Without notch, not for use with booster ring) Hi - Lift: P/N 2485 (Blade is notched for use with boos ter ring) Engine To Mower Deck: P/N 7725 Engine To Transmission: P/N 7650 KOHLER AIR FILTER PART NUMBERS: Please refer to Kohler Engine Operators Manual for correct service interva[...]

TROUBLESHOOTING MOWER CUT QUALITY: There are many variables that can effect the cut quality of any riding mower. Type and conditions of grass, cut height setting, e ngine RPM and ground speed are some of the variables that interact creating differences in cut quality. Examination of one or more of the above will generally produce a quality cut. The[...]

TROUBLESHOOTING Mower pulls to one side or the other Drive adjustment Consult your dealer for repair DRIVE SYSTEM: SITUATION CAUSES REMEDY Poor driving performance Operation of mower Revi ew operators section of owners manual Page 29[...]

TROUBLESHOOTING ELECTRICAL SYSTEM: Circuit breaker engaged Push button to reset Consult your dealer for repair Battery discharge Poor connections on battery Battery water low Wrong battery installed in mower Tighten or replace as required Battery discharge Engine electrical system Have electrical sy stem checked by not functioning correctly your de[...]

[...]

[...]

[...]

[...]

[...]

OWNER INFORMATION DATE PURCHASED ______________ MOWER MODEL NUMBER ________ PURCHASED FROM Name Address MO WER SERIAL NUMBER ___ DM - __________________________________________ ____ DATE ENGINE TUNED: DIXON IN DUSTRIES, INC A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 67337 O945 316 251 2OOO FAX 316 251 4117 DATE OIL CHANGED:[...]

NOTES[...]

NOTES[...]

® Dixon and ZTR are registered trademarks of Dixon Industries, Inc. DIXON INDUSTRIES, INC. A BLOUNT COMPANY AIRP ORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 67337 0945 316251 2000 FAX 316 251 4117 Part No. 8874 September 1995 WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth[...]