Dodge 2007 Magnum SRT8 инструкция обслуживания

2007 OWNER’ S MANUAL 2007 MAGNUM SR T8 81-226-0722 First Edition Printed in U.S.A.[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 6 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ................................. 1 2 9 [...]

[...]

INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual ................. 4 m W arnings And Cautions .................. 6 m V ehicle Identification Number .............. 6 m V ehicle Modifications / Alterations .......... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys ................. 1 1 ▫ Ignition Key Removal ................... 1 1 ▫ Key-In-Ignition Reminder ................ 1 2 m Sentry Key ............................ 1 2 ▫ Replacement Keys ...................... 1 3 ▫ Customer Key Programming .............. 1 4 ▫ G[...]

▫ Child Protection Door Lock ............... 2 3 m W indows ............................. 2 5 ▫ Power W indows ....................... 2 5 ▫ W ind Buffeting ........................ 2 8 m Liftgate .............................. 2 8 m Occupant Restraints ..................... 3 0 ▫ Lap/Shoulder Belts ..................... 3 1 ▫ Lap/Shoulde[...]

A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal The sh[...]

Exit,” under “Personal Settings (Customer Program- mable Features),” under “Electr onic V ehicle Information Center (EVIC)” in Section 4 of this manual. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. [...]

NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the V ehicle Security Alarm Indicator Light will turn on for three (3) seconds for a bulb check. If the light remains on after the bulb ch[...]

consists of programming a blank key to the vehicle electronics. A blank key is one, which has never been programmed. NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer . Customer Key Programming If you have two valid sentry keys, you can program new sentry keys to the system by performing the[...]

General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation. SECURITY[...]

T o Disarm the System: Either press the UNLOCK button on the r emote keyless entry transmitter or insert a valid sentry key into the ignition lock cylinder and turn the key to the ON/ST AR T position. If you open the liftgate after disarming the system, you must use one of the previously described arming se- quences if you wish to rearm the system [...]

ILLUMINA TED ENTRY SYSTEM The courtesy lights will turn on when you use the keyless entry transmitter or open the doors or liftgate. The lights will fade to off after about 30 seconds or they will immediately fade to off once the ignition switch is turned ON from the LOCK position. NOTE: • None of the courtesy lights will operate if the dimmer co[...]

T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you pr ogram the system [...]

Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the transmitter . This feature can be enabled or disabled. For details on how to change the current setting, r efer to “Sound Horn with Remote Key Lock,” under “Personal Settings (Customer Program- mable Features),” under “Electr onic [...]

2. Separate the two halves of the transmitter with a flat blade tool. Do not damage the rubber seal during r e- moval. 3. Remove and replace the battery . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 4. T o assemble the transmitter case, snap th[...]

DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock each door , pull the door lock plunger on each door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the keys are not inside the vehicle before closing the do[...]

Power Door Locks A power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you fr om acciden- tally locking your keys in the vehicle. Removing the key or [...]

Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled. For details, refer to “Lock Doors Automatically at 15 mph (24 Km/h),” under “Personal Settings (Cus- tomer Programmable Featur es),” under “Electronic V e- hicle Information Center (EVIC)” in Section 4 of this manual. Automatic Unlock Doors on [...]

2. Insert the tip of the vehicle’s ignition key or alike into the child lock control and pull it upwar d. 3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. W ARNING! A void trapp[...]

T o Disengage the Child Protection Door Lock 1. Open the rear door . 2. Insert the tip of the vehicle’s ignition key or alike into the child lock control and pull it downwar d. 3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: After disengaging the child protection door lock system, always test the door from the inside to make certain it [...]

W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death. Auto Down Feature The driver door power window switch, and some model passenger door[...]

Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. NOTE: • If the window runs into any obstacle during auto- closure, it will r everse direction and then stop. Remove the obstacle and use the window switch[...]

Reset Any time the vehicle battery is disconnected, or goes dead, the auto-up function will be disabled. T o reactivate the auto-up feature, perform the following steps after vehicle power is restor ed: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is clos[...]

Once unlocked, the liftgate can be opened or closed. T o open the liftgate, depress the liftgate r elease switch located in the exterior handle and pull the liftgate open with one fluid motion. The liftgate will not open manually if the gear selector is moved out of the P ARK position or the vehicle speed is above 0 mph (0 km/h). NOTE: If a power m[...]

W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower swit[...]

Buckle up even though you are an excellent driver , even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own str eet. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injurie[...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the front seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. 3. When the belt is long enough[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop, you could move too far forward, increasing[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well. In a collision, it could even cut into you. Be sure the[...]

activated. T o reset this featur e you must let all of the belt webbing return into the r etractor . Y ou will not be able to pull out more webbing until all of the webbing has been returned back into the r etractor . W ARNING! The rear center lap/shoulder belt is equipped with a lock-out feature to ensure that the rear seat back is in the fully up[...]

In the rear seat, move towar d the center of the seat to position the belt away from your neck. Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and t[...]

if the driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h). BeltAlert Programming The Enhanced W arning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by performing the following steps: NOTE: DaimlerChrysler does not recommend deacti- vating the Enhanced W arn[...]

Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked. However , the belt will still retract to r emove slack in the shoulder belt. Use The Automatic Locking Mode any time a child safety seat is installed in a seating position that has a seat belt with this feature. Seat belts that have the Automatic Lo[...]

W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions. Remove and store the extender when not needed. Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicl[...]

This vehicle may also be equipped with side curtain airbags to protect the driver and passengers sitting next to a window . If the vehicle is equipped with side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow [...]

NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to pr ovide improved protection for the driver and fr ont passenger . Side curtain airbags also work with seat belt[...]

8. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate. 9. If your vehicle has side curtain airbags do not lean against the door , airbags will inflate forcefully into the space between you and the door . 10. If the airbag system in this vehicle needs to be modified to accommodate a dis[...]

• Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side W in- dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Seatbelt Reminder Light • Knee Impact Bolsters • Front Acceleration Sensors • Driver and Front Passenger Seat Belt P[...]

W ARNING! Ignoring the AIRBAG W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away . • The Driver and Front Passenger Airbag/Inflator Units are l[...]

• The Knee Impact Bolsters help protect the knees of the driver and the front passenger , and position every- one for the best interaction with the front airbag. If A Deployment Occurs The airbag system is designed to deploy when the ACM detects a moderate-to-severe collision, to help r estrain the driver and front passenger , and then to immedia[...]

W ARNING! Deployed airbags can’t protect you in another colli- sion. Have the airbags replaced by an authorized dealer as soon as possible. Enhanced Accident Response Feature If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically . In addition, approxim[...]

Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system promptly: • The Airbag W arning Light does not come on or flickers during the 6 to 8 seconds when the[...]

treated confidentially . Confidential data will not be dis- closed by DaimlerChrysler to any third party except when: 1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2. Used in defense of litigation involving a DaimlerC[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper [...]

Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year . These child seats [...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward facing child restraint should only be used in a rear seat. A rearward f[...]

the child restraint using lower anchorages and upper tether straps from the child r estraint to the vehicle structur e. LA TCH-compatible child restraint systems ar e now avail- able. However , because the lower anchorages are to be introduced over a period of years, child r estraint systems having attachments for those anchorages will continue to [...]

Installing the LA TCH-Compatible Child Restraint System W e urge that you car efully follow the directions of the manufacturer when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that were pr ovided with the child restraint system. The re[...]

of reach of childr en. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach. If the buckled seat belt interfer es with the child restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the ch[...]

T ighten webbing. T o release, simply unbuckle the seat belt by depressing the button, allowing the webbing to retract into the r etractor . In the rear seat, you may have tr ouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch pl[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and poss[...]

CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the br eak-in and not interpreted as an indication of dif ficulty . SAFETY TIPS T ransporting Passengers[...]

If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the [...]

Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor , torn webbing, etc. If there is any question r egarding belt or retractor condition, r eplace the belt. Airbag W arning Light The light should come on and remain on for 6 to 8 second[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors .............................. 6 4 ▫ Inside Day/Night Mirror ................. 6 4 ▫ Automatic Dimming Inside Mirror — If Equipped ............................ 6 4 ▫ Outside Mirrors ....................... 6 5 ▫ Exterior Mirrors Folding Featur e — If Equipped ..............[...]

▫ Heated Seats ......................... 8 9 ▫ Folding Rear Seat ...................... 9 1 m T o Open And Close The Hood ............. 9 2 m Lights ............................... 9 3 ▫ Headlight Switch ...................... 9 3 ▫ Automatic Headlights — If Equipped ........ 9 4 ▫ Headlights On W ith W ipers (A vailable W ith Auto Head[...]

m Overhead Console ..................... 1 0 6 ▫ Courtesy/Reading Lights ................ 1 0 6 ▫ Sunglasses Storage .................... 1 0 6 m Garage Door Opener (HomeLink t )— If Equipped .......................... 1 0 7 ▫ Programming HomeLink ................ 1 0 8 ▫ Canadian Programming/Gate Pr ogramming . . 1 10 ▫ Using HomeLink [...]

MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjusted while [...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors T o receive maximum benefit, adjust the outside mirr or(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the[...]

Power Remote-Control Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror , or off position. After selecting a mirror , move the knob in the same direction you want the mirr or to move. Use the center off position to guard against accide[...]

HANDS–FREE COMMUNICA TION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., 9 Call” { “Mike” { ”W ork 9 or 9 Dial” { “248-555-1212 9 ). Y our cellular phone’s audio is[...]

The rearview mirr or contains the microphone for the system and the control buttons that will enable you to access the system. The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Heads[...]

• For certain operations, compound commands can be used. For example, instead of saying 9 Setup 9 and then 9 Phone Pairing, 9 the following compound command can be said: 9 Setup Phone Pairing. 9 • For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into parts and s[...]

NOTE: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Phone Pairing 9 and follow the audible prompts. • When prompted, afte[...]

Call/Dial by Saying a Number • Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Dial. 9 • System will prompt you to say the number you want call. • For example, you can say 9 234-567-8901. 9 • The UConnect™ system will confirm the phone num- ber and then dial. The number will appear in th[...]

• When prompted, enter the number designation (e.g., 9 Home, 99 W ork, 99 Mobile, 9 or 9 Pager 9 ). This will allow you to store multiple numbers for each phonebook entry , if desired. • When prompted, r ecite the phone number for the phonebook entry that you are adding. After you are finished adding an entry into the phone- book, you will be g[...]

• Press the ’Phone’ button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Delete. 9 • After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say 9 List Names 9 t[...]

• The UConnect™ system will then prompt you as to number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed thr ough the UConnect™ system if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way c[...]

Place/Retrieve a Call from Hold T o put a call on hold, press the 8 Phone’ button until you hear a single beep. This indicates that the call is on hold. T o bring the call back from hold, pr ess and hold the 8 Phone’ button until you hear a single beep. T oggling Between Calls If two calls are in pr ogress (one active and one on hold), press th[...]

• After ignition key is switched off, a call can continue on the UConnect™ system either until the call ends or until the vehicle battery condition dictates cessation of the call on the UConnect™ system and transfer of the call to the mobile phone. • After ignition key is switched to off, a call can continue on the UConnect™ system for ce[...]

NOTE: The emergency number dialed is based on the Country where the vehicle is pur chased (91 1 for USA and Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. The UConnect™ system does slightly lower your chances of successfully making a phone call as to that for the cell phone direct[...]

W orking with Automated Systems This method is designed to be used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated tele- phone system. Y ou can use your UConnect™ system to access a voice- mail system or an automated service, such as, paging service or automated customer ser[...]

your cell phone, the UConnect™ system will provide notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect™. The status is given for roaming net- work signal strength, phone battery str ength, etc. Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellu[...]

Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred fr om your cellular phone to the UConnect™ system without terminating the call. T o transfer an ongo- ing call from your UConnect™ pair ed cellular phone to the UConnect™ system or vice-versa, press the ’V oic[...]

• Y ou can also press the 8 V oice Recognition’ button anytime while the list is being played, and then choose the phone that you wish to select. • The selected phone will be used for the next phone call. If the selected phone is not available, the UCon- nect™ system will return to using the highest priority phone present in or near (appr o[...]

• Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system, such as voice mail, or when sending a page at the end of speaking the digit string, make sure to say 9 send. 9 • Storing names in phonebook wh[...]

Bluetooth Communication Link Occasionally , Cellular phones have been found to lose connection to the UConnect™ system. When this hap- pens, the connection can generally be re-established by switching the phone off/on. Y our cell phone is recom- mended to remain in Bluetooth 9 on 9 mode. Power-Up After switching the ignition key from OFF to eithe[...]

84 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 85 3[...]

86 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up [...]

W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat control[...]

Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support. Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjustable restraints should be [...]

The controls for each heater ar e located near the bottom center of the instrument panel. After turning on the ignition, you can choose from High, Of f, or Low heat settings. Amber LEDs in the top portion of each switch indicate the level of heat in use. T wo LEDs will illuminate for high, one for low , and none for off. Press the switch once to se[...]

Folding Rear Seat The rear seatbacks can be folded forwar d to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use. When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seat[...]

TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) t[...]

W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Y ou could have a collision. Be sure all hood latches are fully latched before driving. LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. This switch contr ols the operation of the hea[...]

Automatic Headlights — If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. T o turn the system ON, rotate the headlight switch counter -clockwise to the AUTO (A) position. When the system is ON, the Head- light T ime Delay feature is also ON. This means the headlights will stay ON for up to 90 s[...]

T o activate the delay feature, turn of f the ignition switch while the headlights are still on. Then, turn of f the headlights within 45 seconds. The delay interval begins when headlight switch is turned off. If you turn the headlights, park lights, or ignition switch on again, the system will cancel the delay . If you turn the headlights off befo[...]

Multi-Function Lever The multi-function lever controls the operation of the turn signals, headlight beam selection, and passing lights. The lever is located on the left side of the steering column. T urn Signals Move the Multi-Function Lever up or down and the corresponding turn signal indicator in the instr ument cluster flashes to show proper ope[...]

Overhead Console Map/Reading Lights These lights are mounted between the sun visors on the overhead console. Each light is turned ON by pr essing the lens. Press the lens a second time to turn OFF the light. These lights also turn on when a door is opened, or when the unlock button on the remote keyless entry transmitter is pressed, or when the dim[...]

Interior light Defeat (OFF) Rotate the dimmer control to the extr eme bottom “OFF” position. The interior lights will remain of f when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the dimmer control upwar d to the first detent. This feature brightens all text displays such as the odometer , Electronic V ehicle Information[...]

CAUTION! T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper switch is left in any position other than OFF . Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause be- tween cycles desirable. Rotate [...]

If you activate the washer while the windshield wiper control is in the delay range, the wipers will operate for two wipe cycles after releasing the lever and then r esume the intermittent interval previously selected. If you activate the washer while the windshield wiper is turned OFF , the wipers will operate for two wipe cycles and then turn OFF[...]

The fluid reservoir will hold nearly 1 gallon (4 liters) of washer fluid when the message “Low W asher Fluid” appears in the Electronic V ehicle Information Center (EVIC). W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer so[...]

T o unlock the steering column, pull the control handle outward. T o tilt the steering column, move the steering wheel upward or downwar d as desired. T o lengthen or shorten the steering column, pull the steering wheel outward or push it inwar d as desired. T o lock the steering column in position, push the control handle inwar d until fully engag[...]

Press the switch forwar d to move the pedals forward (toward the fr ont of the vehicle). Press the switch r earward to move the pedals rearwar d (toward the driver). • The pedals can be adjusted with the ignition OFF . • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Sp[...]

T o Activate: Push the speed control lever inwar d (toward the steering column) and release (“ON/OFF”). The indicator light in the lever (and in the instrument cluster on some models) will illu- minate to show that the speed control system is ON. T o turn the system OFF , push the lever inward (towar d the steering column) again and release. At[...]

speed. T o do so, push the lever up and release (RES/ ACCEL), and then remove your foot fr om the accelerator pedal. T o V ary the Speed Setting: When the speed control is set, you can incr ease speed by pushing the lever up and holding (“RES/ACCEL”). When the lever is released, a new set speed will be established. Pushing the lever up and rele[...]

OVERHEAD CONSOLE The overhead console contains courtesy/r eading lights, an optional universal garage door opener (HomeLink t ), storage for sunglasses, and an optional power sunroof switch. Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn on the light. Pr ess it a second time to tu[...]

GARAGE DOOR OPENER (HomeLink T )—I F EQUIPPED The HomeLink t Universal T ransceiver replaces up to three r emote controls (hand held transmitters) that oper- ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button. The Universal T ransceiver operates off your vehicle’s batter[...]

Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that you install a new battery in the hand-held transmitter of the device being programmed. This will allow for quicker training and accurate transmission of the radio-frequency signal. The Electronic V ehicle Inform[...]

1. Press and hold the two outer HomeLink buttons. Release the buttons only when the EVIC displays “Chan- nels Cleared” (after 20 seconds); however , do not hold the buttons for longer than 30 seconds. Do not repeat this step if programming a second or thir d hand-held trans- mitter to the remaining HomeLink buttons. 2. Position the end of your [...]

NOTE: If your garage door opener fails to respond to the programmed HomeLink t Universal T ransceiver , and your garage door opener is manufactured after 1995, it may have a multiple security code system (rolling code system). Please proceed to Steps 6–8 to complete the programming of a r olling code equipped device (most common garage door opene[...]

NOTE: If programming a garage door opener or gate operator , it is advised to unplug the device during the 9 cycling 9 process to pr event possible overheating. 3. Continue to press and hold the HomeLink button while you press and release your hand-held transmitter every two seconds until the frequency signal is accepted successfully by HomeLink. T[...]

For questions or comments, contact HomeLink at: www .homelink.com or 1-800-355-3515 . Security If you sell your vehicle, be sure to erase the fr equencies by following the “Erasing HomeLink Buttons” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the fol[...]

W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wi[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof - Express Press and r elease the 9 V 9 butto[...]

Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual. Sunroof Fully Closed Press the switch forwar d and release to ensure that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There ar e three 12-volt electrical outlets on this vehicle. All of the outlets are pr[...]

The center console outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting. The auxiliary outlet is also powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr e[...]

Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories th[...]

Rear Seat Cup Holders The rear seat cup holders ar e located in the center armrest between the rear seats. The cup holders ar e positioned forward in the armr est and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the r ear occupants’ el- bows. STORAGE Console Features The center consol[...]

Cargo Management System — If Equipped The cargo ar ea has an upper and lower load floor . Additional innovative features in the car go area are the two molded-in bins in the quarter trim panels. Each bin will hold a gallon of milk and a 2-liter bottle of pop. A cargo management system that stores on the lower load floor below the bi-level cargo f[...]

Load Floor Handle Load Floor Partially Folded 120 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Rollaway T onneau Cover — If Equipped The removable r ollaway tonneau cover mounts in the cargo ar ea behind the top of the rear seats. Load Floor Fully Folded UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 121 3[...]

The tonneau cover , when extended, covers the cargo ar ea to keep items out of sight. Notches in the trim panels near the liftgate opening secure the extended tonneau cover in place. The tonneau cover rolls away neatly inside its housing when not in use. Y ou can also remove the tonneau cover from the vehicle to make mor e room in the cargo ar ea. [...]

Then, insert the spring-loaded post on the opposite end of the tonneau cover housing into the remaining fr ont attachment point. Next, grab the tonneau cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the notches in the trim panels. Then, lower the [...]

Cargo Organizer The optional cargo or ganizer can also be placed into the lower load floor . Lift the handle and pull to open the cargo or ganizer . Cargo Organizer Handle 124 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Cargo T ie-Down Hooks The tie-downs located on cargo ar ea floor and on the rear trim panels should be used to safely secure loads when vehicle is moving. W ARNING! • Cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or colli- sion, a hook could pull loose and allow the child seat to come loose. A child cou[...]

ROOF LUGGAGE RACK — IF EQUIPPED The roof luggage rack consists of side rails and adjustable crossbars. The r oof luggage rack is designed to carry up to 150 lbs (68 kg) of cargo uniformly distributed over both crossbars. When loading cargo on the r oof luggage rack, distribute the cargo weight evenly on the cr ossbars. The roof luggage rack does [...]

4. Pick up the crossbar and move it to the desir ed location. Do not place the crossbar dir ectly over the sunroof glass (if equipped). 5. T urn the lower clamp until the round side of the clamp completely faces the side rail. 6. T urn the lever clockwise to tighten the lower clamp to the side rail. When tight, flip the lever downward. 7. Repeat St[...]

W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in personal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack. LOAD LEVELING SYSTEM The automatic load leveling system will provide a level- riding v[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel And Controls ............ 1 3 3 m Premium Instr ument Cluster .............. 1 3 4 m Instrument Cluster Descriptions ........... 1 3 5 m Electronic V ehicle Information Center (EVIC) .............................. 1 4 3 ▫ Electronic V ehicle Information Center (EVIC) Displays .....[...]

▫ Operating Instructions - Radio Mode ....... 1 5 6 ▫ Operation Instructions - CD Mode ......... 1 5 9 ▫ Operation Instructions - Auxiliary Mode ..... 1 6 0 ▫ Operating Instructions - Hands Fr ee Phone — If Equipped ........................... 1 6 1 ▫ Operating Instructions - Satellite Radio — If Equipped ........................... 1[...]

▫ Audio Clock Display ................... 1 7 6 m V ideo Entertainment System (Sales Code XR V) — If Equipped .......................... 1 7 7 ▫ Kicker Mobile Surround (Kms1) ........... 1 7 9 m Satellite Radio — If Equipped ............. 1 7 9 ▫ System Activation ..................... 1 7 9 ▫ Electronic Serial Number/Sirius Identificat[...]

▫ Rear W iper Operation .................. 1 9 7 ▫ Rear W asher Operation ................. 1 9 7 ▫ Adding W asher Fluid .................. 1 9 8 ▫ Electric Rear W indow Defroster ........... 1 9 8 132 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT P ANEL AND CONTROLS 1 — Air Outlet 6 — Glove Box 1 1 — Ash T ray* 2 — Instrument Cluster 7 — Radio 12 — Ignition Switch 3 — Rear W iper/W asher Switch 8 — Climate Control 13 — Hood Release 4 — Hazard Switch 9 — Heated Seat Switch* 14 — Headlight Switch 5— Electronic Stability Pr ogram Off Button* / T raction Con[...]

PREMIUM INSTRUMENT CLUSTER 134 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. T rip Odometer Button Press this button to change the display fr om odometer to either of two trip odometer settings. The letter “A” or “B” will appear when in the trip odometer mode. Push in [...]

engine running, your vehicle will usually be drivable. However , see your dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is requir ed. In this case, you may experience reduced performance, an elevated/r ough idle or engine stall, and your vehicle may requir e towing. Also, have the sys[...]

9. T urn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. NOTE: A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on. NOTE: Check for a defective outside light bulb if either indicator flashes at a rapid rate. (See page 96 for more inf[...]

cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corr ected. (See page 222 for more information.) 14. Oil Pressur e W arning Light This light shows low engine oil pressur e. The light should turn on momentarily when the eng[...]

Loose Fuel Filler Cap If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC). T ighten the fuel filler cap properly and pr ess the odometer reset button to turn off the message. If the pr oblem con[...]

turn on in the event of an EBD failure. Immediate r epair of the ABS system is r equired in the event of an EBD failure. The operation of the Brake W arning Light can be checked by turning the ignition switch from the OFF position to the ON position. The light should turn on for approxi- mately two seconds and then turn off. The light will remain o[...]

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to maintain correct tir e pressure, even if under -inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale. The T ire Pressur e Monitoring T elltale Light will illumi- nate in the instrument[...]

23. Anti-Lock Brake Light This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is requir ed. However[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the speedometer . V ehicles equipped with steering wheel mounted buttons (de- scribed in this section) are also equipped with the EVIC. The EVIC consists of the foll[...]

Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being played (if so equipped), or changes the current CD track being played (if so equipped) when the EVIC is in the Compass/T emp/Audio screen. Press the SCROLL button to scr oll throug[...]

• Left/Right Front Door Ajar (one or mor e, with a single chime if speed is above 1 mph [1.6 km]) • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph [1.6 km]) • Door(s) Ajar (with a single chime if vehicle is in motion) • T runk Ajar (with a single chime) • Low W asher Fluid (with a single chime) • Cha[...]

• Elapsed T ime • Display Units of Measure in Press the SCROLL button to cycle through all the T rip Computer functions. The T rip Functions mode displays the following: • A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds[...]

• Display Units of Measure in: T o make your selection, press and r elease the FUNC- TION SELECT button until “US” or “METRIC” appears. T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the FUNCTION SELECT button once to clear the resettable function being dis- played. T o reset[...]

Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set using the following procedur e: NOTE: Magnetic materials[...]

1. T urn the ignition switch ON. 2. Press and hold the compass button for appr oximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and r elease FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and r ele[...]

The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. The EVIC displays this symbol to indicate that the UConnect™ phone is currently r oaming. The EVIC displays this symbol to indicate that you have voice mail. The EVIC displays this symbol to indicate a text message. The EVIC displays this symbol to i[...]

Navigation — If Equipped Navigation Display Control Press and r elease the MENU button until Navigation displays in the EVIC. When the Navigation System is On, the steering wheel buttons can be used to select the Map or Menu display on the Navigation Unit. When the Menu display is active, the SCROLL button can be used to scroll through the list, [...]

Use the SCROLL button to display one of the following choices: “Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, Deutsch, Italiano, or Francai[...]

on lock/unlock feature. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. “Flash Lights with Remote Key Lock” When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter . This feature may be selected wit[...]

door will cancel this feature. T o make your selection, press and r elease the FUNCTION SELECT button until “Off,” “45 sec.,” “5 min.,” “10 min.,” “30 min.,” or “60 min.” appears. “Confirmation of V oice Commands” — If Equipped When ON is selected, all voice commands from the UConnect™ system are confirmed. T o make [...]

and thus remain a part of the AM reception. They interfere very little with the fr equency variations that carry the FM signal. AM Reception AM sound is based on wave amplitude, so AM r eception can be disrupted by such things as lightning, power lines and neon signs. FM Reception Because FM transmission is based on frequency varia- tions, interfer[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) i[...]

(if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button causes the tuner to scan through pr eset stations in either , AM, FM, or Satellite (if equipped) frequencies, pausing for 5 seconds at each pre[...]

Press the r otary TUNE control a third time and TREB will display . T urn the TUNE control to the right or left to increase or decr ease the T reble tones. Press the r otary TUNE control a fourth time and BAL will display . T urn the TUNE control to the right or left to adjust the sound level from the right or left side speakers. Press the r otary [...]

Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display . If the vol[...]

TIME Button (CD Mode) Press this button to change the display fr om elapsed CD playing time to time of day . The time of day will display for 5 seconds. R W/FF (CD Mode) Press and hold the FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased. The R W (Reverse) button works in a similar manner . RND/SET Button (Rando[...]

MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound fr om the speakers. 9 MUTE 9 will display . Press the MUTE button a second time and the sound from the speakers will r eturn. Rotating the volume control or turning OFF the ignition will also return the sound fr om the speakers. SCAN Button (Auxiliary Mode) No function. EJECT Bu[...]

SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Swi[...]

Press the right side of the button to seek up and the left side to seek down. The radio will remained tuned to the new station until you make another selection. Holding the button and will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next station, in eit[...]

AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will display . T urn the TUNE control to the right or left to incr ease or decrease the Bass tones. Press the r otary TUNE control a second time and MID will display . T urn the TUNE control to the right [...]

Soft Rock Soft_Rock T op 40 T op_40 Country Country Oldies Oldies Soft Soft Nostalgia Nostalgia Jazz Jazz Classical Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Soft_R_&_B Foreign Language Foreign_Language Religious Music Religious_Music Religious T alk Religious_T alk Personality Personality Public Public College College U[...]

Seek Button Press the SEEK button up for the next selection on the tape and down to return to the beginning of the curr ent selection. Press the SEEK button up or down to move the track number to skip forward or backwar d 1 to 6 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. Fast Forward (FF) Press the [...]

Noise Reduction The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off. T o turn off the Dolby Noise r eduction System: Press Preset 1 after you insert the tape. The NR light in the display will go off when the Dolby System is of f. * ”Dolby” noise reduction is manufactur ed under license from Dolby Labo[...]

SCAN Button (CD MODE for CD Audio Play) Press the Scan button to scan thr ough each track on the CD currently playing. LOAD/EJECT Button (CD Mode for CD Audio Play) LOAD/EJECT - Load Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSE[...]

R W/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . TUNE Control (CD MODE for CD Audio Play) Pressing the TUNE contr ol allows the setting of the T one, Fade, and Balance. S[...]

files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats ar e not supported. The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (inc[...]

ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP3 and WMA Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contai[...]

The radio display will show 9 LOADING DISC 9 when the disc is loading. LOAD/EJT - Eject Press the LOAD/EJT button and the push- button with the corresponding number wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9 EJECTING DISC 9 when the disc is being ejected and prompt the user[...]

RND/PTY Button (CD Mode for MP3 Play) Pressing this button plays files randomly . SET/DIR Button (CD Mode for MP3 Play) Press the SET/DIR Button to display folders, when playing an MP3 discs that have a file/folder structur e. T urn the TUNE control to display available folders or move through available folders. Pr ess the TUNE control to select a [...]

screen to pr ovide maps, turn identification, selection menus and instructions for selecting a variety of destina- tions and routes, AM/FM stereo radio and six-disc CD changer with MP3 capability . Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America. Refer to your “Navigati[...]

4. T o turn daylight savings on or off, select “Daylight Savings” and press ENTER. Select “On” or “Of f” and press ENTER. 5. Select DONE to exit from the clock setting mode. Pr ess ENTER to save your changes. If you press CANCEL or NA V then your changes will not be saved. User Defined Clock If you wish to set the clock to a time differ[...]

4. T o increase the clock by minutes, make sure “MIN +” is highlighted and press ENTER. Pr ess ENTER again to increase the clock by another minute. 5. T o decrease the clock by minutes, use the Select Encoder to highlight the “-“ sign. Press ENTER. Pr ess ENTER again to decrease the clock by another minute. 6. Select “DONE” to exit from[...]

3. T o switch the clock to the small clock, quickly press TIME again. 4. T o toggle back to the large clock, simply press TIME. VIDEO ENTERT AINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (V ideo Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-power ed remote control, and two [...]

Raising The DVD Screen Remote Control Location 178 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

Kicker Mobile Surround (KMS1) The VES for this vehicle comes equipped with Kicker Mobile Surround (KMS1). This featur e offers the ultimate movie experience by providing surr ound sound uniquely equalized for the interior space of your vehicle. The KMS1 activates whenever a DVD is in the VES player , and the radio mode is set to VES, and the video [...]

Electronic Serial Number/Sirius Identification Number (ESN/SID) The Electronic Serial Number/Sirius Identification Num- ber is needed to activate your Sirius Satellite Radio system. T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith REF Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the[...]

Selecting Satellite Mode — RAQ and RAK Radio Press the MODE button r epeatedly until the word 9 SA T 9 appears in the display . These radios will also display the current station name and program type. For mor e information, such as song title and artist press the MSG or INFO button. A CD or tape may remain in the radio while in the Satellite rad[...]

NOTE: Pressing the 9 SEEK 9 or 9 SCAN 9 button, while performing a music type scan, will change the channel by one and stop the search. Pr essing a pre-set memory button during a music type scan, will call up the memory channel and stop the search. PTY Button ( SEEK ( When the desired pr ogram is obtained, press the 9 SEEK 9 button within five seco[...]

REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the 3 and 9 o’clock positions. V ehicles equipped with steering wheel mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver -interactive display . This is located in the[...]

When the EVIC is in the Compass/T emp/ Audio screen, pr ess the FUNCTION SELECT button to advance the radio to the next preset station, to change the side of the tape being played (if so equipped), or to change the cur- rent CD track being played (if so equipped). when the EVIC is in the Compass/T emp/ Audio screen, pr ess the SCROLL button to seek[...]

Press either the top or bottom of the SCROLL button twice to listen to the second track on the CD, three times to listen to the third track, and so forth. Satellite Radio Operation Press the top of the SCROLL button once to SEEK the next listenable station up from the curr ent setting. Press the bottom of the SCROLL button once to SEEK the next lis[...]

CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper , paper CD labels, or tape to the disc; avoid scratching the disc. 4. Do no[...]

Manual Air Conditioning and Heating System Blower Control The rotary knob on the left contr ols the blower . The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF . T emperature Control The rotary knob in the center contr ols air temperatu[...]

NOTE: T o improve fuel economy , leave in defrost only when necessary . • Defrost/Floor Air flows through the fr ont and rear floor outlets and the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles. • Floor Air flows through the floor outlets located under the instrum[...]

Air Conditioning Control Press this button to turn on and turn of f the air conditioning. When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the mode control. Pr ess this button a second time to turn off the air conditioning. An LED in the button will illuminate when compressor operation is sel[...]

the Blower Control knob (on the left) to either LO AUTO or HI AUTO. The LO AUTO position should be used for front seat occupants only . The HI AUTO position should be used when more airflow is desir ed, or when rear seat occupants are pr esent. Then, dial in the temperature you would like the system to maintain by rotating the driver or passenger T[...]

NOTE: • The surface of the climate control panel and the top center of the instrument panel should be kept fr ee of debris due to the location of the climate control sensors. Mud on the windshield may also cause poor operation of this system. • Extended use of recir culation may cause the windows to fog. If the interior of the windows begins to[...]

192 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

The operator can override the AUT O mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grille[...]

NOTE: T o control the air conditioning manually , the mode selector must be moved out of the AUTO position. • Recirculation Contr ol This button can be used to block out smoke, odors, dust, high humidity , or if rapid cooling is desired. The r ecirculation mode should only be used temporarily . An LED in the button illuminates when the recir cula[...]

V acation Storage Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, r un the air condi- tioning system at idle for about five minutes in the fresh air and high blower setting. This will insure adequate system lubrication to minimize the possibility of com- pressor damage when the system is started agai[...]

Control Setting Suggestions for V arious W eather Conditions 196 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

REAR WINDOW FEA TURES Rear Wiper Operation The rear wiper is operated by the r ear wiper/ washer switch. The switch is located near the top center of the instrument panel. An indicator in the switch illuminates when the rear wiper is on. T o use the rear wiper , push the left side of the rear wiper/washer switch in and release. The rear wiper syste[...]

Adding W asher Fluid The windshield washer and rear window washer shar e the same fluid reservoir . The reservoir is located in the front of the engine compartment on the passenger side of the vehicle. Be sure to check the fluid level at r egular intervals. Fill the reservoir with windshield washer sol- vent (not radiator antifreeze) and operate th[...]

CAUTION! T o avoid damaging the electrical conductors of the rear window defroster , do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window . Labels can be peeled off after soaking with warm water . UNDERST ANDING YOUR INSTRUMENT P ANEL 199 4[...]

[...]

ST ARTING AND OPERA TING CONTENTS m Starting Procedur es .................... 2 0 4 ▫ Automatic T ransmission ................ 2 0 5 ▫ Normal Starting ...................... 2 0 5 ▫ Extremely Cold W eather (Below 2 20°F Or 2 29°C) ................ 2 0 5 ▫ If Engine Fails T o Start ................. 2 0 5 ▫ After Starting ...............[...]

m Electronic Brake Contr ol System ........... 2 2 2 ▫ ABS (Anti-Lock Brake System) ............ 2 2 2 ▫ TCS (T raction Control System) ............ 2 2 3 ▫ BAS (Brake Assist System) ............... 2 2 3 ▫ ESP (Electr onic Stability Program) ......... 2 2 4 ▫ Synchronizing ESP .................... 2 2 7 ▫ ESP/BAS Malfunction Indicator [...]

▫ 6.1L Engine ......................... 2 5 3 ▫ Reformulated Gasoline ................. 2 5 4 ▫ Gasoline/Oxygenate Blends .............. 2 5 4 ▫ MMT In Gasoline ..................... 2 5 5 ▫ Materials Added T o Fuel ................ 2 5 5 ▫ Fuel System Cautions .................. 2 5 5 ▫ Carbon Monoxide W arnings .............. 2 5 6 [...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or [...]

Automatic T ransmission The gear selector must be in the NEUTRAL or P ARK position before you can start the engine. Apply the brakes before shifting into any driving gear . Normal Starting Normal Starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. T urn the key to the “ST AR T” position an[...]

W ARNING! • Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Un- bu[...]

ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cord. The engine block heater cord is r outed under the hood on the driver side of the vehicle. It has a removable ca[...]

W ARNING! It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idlin[...]

The selector lever is automatically locked while in the P (Park) position. T o move the selector lever out of the P (Park) position, the brake pedal must be firmly depressed before the shift lock will r elease. Shift the selector lever to the desired position only when the engine is idling normally and the brake pedal is applied. Do not release the[...]

Brake/T ransmission Shift Interlock System This vehicle is equipped with a brake transmission shift interlock system (BTSI) that holds the selector lever in the P (Park) position when the ignition switch is in the LOCK position. T o move the gear selector lever out of the P (Park) position, the ignition switch must be turned to the ON position, and[...]

5 Speed Automatic T ransmission Shifting from D (Drive) to P (Park) or R (Reverse) (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake when moving the selector lever between these gears. Gear Ranges P (Park) P (Park) supplements the parking brake by loc[...]

The following indicators should be used to ensure that you have engaged the selector lever into the P (Park) position: • When shifting into P (Park) move the lever all the way forward until it stops, and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P (Park) position. CAUTION! Damage to th[...]

D (Drive) This range should be used for most city and highway driving. It provides the smoothest upshifts and down- shifts and best fuel economy . The transmission automatically upshifts through fifth gear . The D (Drive) position provides optimum driving characteristics under all normal operating conditions. When frequent transmission shifting occ[...]

Delayed Shifts in Cold T emperatures During cold temperature operation, you may notice delayed upshifts depending on engine and transmission temperature as well as vehicle speed. This featur e im- proves warm up time of the engine and transmission to achieve maximum efficiency . T emporary T ransmission Limp Home Mode The transmission is monitored [...]

times. Follow the reset pr ocedure described under “T em- porary T ransmission Limp Home Mode” in this section. In Permanent Limp Home Mode, P (Park), R (Reverse), and N (Neutral) will continue to operate. Second gear will operate in the D (Drive) shifter position. The mal- function indicator light may illuminate. AUTOSTICK T Autostick t is a d[...]

right for at least one second. The transmission will now operate automatically , shifting between the five available gears. Autostick T General Information • Y ou can start out in first or second gear . The system will ignore attempts to upshift at too low of a vehicle speed. • The transmission will automatically downshift to first gear when co[...]

partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precau- tions should be observed: 1. Slow down during rainstorms or when the roads ar e slushy . 2. Slow down if road has standing water or puddles. 3. Replace tires when tr ead wear indicators first become visible. 4. Keep tires pr operly[...]

The foot operated parking brake is positioned below the lower left corner of the instrument panel. T o apply the parking brake, push the parking brake pedal down and then remove your foot fr om the pedal. T o release the parking brake, push down on the parking brake pedal and then release. The brake light in the instrument cluster will turn on when[...]

BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. There will be some loss of overall braking effectiveness. This may be evident by increased pedal travel during application, gr eater pedal force r equired to slow or sto[...]

Y ou also may experience the following when the brake system goes into Anti-lock: • The ABS motor running (it may continue to run for a short time after the stop), • the clicking sound of solenoid valves, • brake pedal pulsations, • and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristic[...]

All vehicle wheels and tires must be the same size and type and tires must be pr operly inflated to produce accurate signals for the computer . Anti-Lock Brake Light The ABS light monitors the Anti-Lock Brake Sys- tem. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the AB[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to t[...]

W ARNING! The ABS (Anti-Lock Brake System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ABS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attenti[...]

W ARNING! The BAS (Brake Assist System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevail- ing road conditions. The BAS cannot prevent acci- dents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attent[...]

W ARNING! The ESP (Electronic Stability Program) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe,[...]

Full Of f This mode is intended for off-highway or of f-road use only and should not be used on any public roadways. In this mode, all TCS and ESP stability featur es are turned off. T o enter the “Full Off” mode, depress and hold the “ESP OFF” button for 5 seconds while the vehicle is stopped with the engine running. After 5 seconds, a chi[...]

W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP is unavailable. In an emer - gency evasive maneuver , the ESP system will not engage to assist in maintaining stability . The “Full Off” ESP mode is intended for of f-highway or off- road only . Synchronizing ESP The malfunction indicator light for the ESP is co[...]

NOTE: • 9 The 9 ESP/TCS Indicator Light 9 and the 9 ESP/BAS Malfunction Indicator Light 9 will turn on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned off pr eviously . • The ESP Contr ol System will make buzzing or clicking sounds when it is active[...]

NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewa[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ( ....blank.... ( = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspe[...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If th[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the [...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Load[...]

6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: The following table shows examples on how to calculate total load, cargo/luggage, and towing capaci- ties of your vehicle wit[...]

236 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory o[...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and results in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabilit[...]

when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es speci[...]

W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h). Radial-Ply Tires W ARNING! Combining radial ply tires with other types of [...]

T read Wear Indicators T read wear indicators ar e in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the tread is worn to the tread wear indicators, the tir e [...]

Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressure. The manu- facturer str ongly recommends that you use tires equiva- lent to the originals in size, quality and performance when replacement is needed (r efer to the paragra[...]

CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear . • Uneven tire wear , such as feathering and one-sided wear . • V ehicle pull to right or left. T ires may also cause the vehicle to pull to [...]

CAUTION! T o avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is important that only chains in good condition are used. Broken chains can cause serious damage. Stop the vehicle immedi- ately if noise occurs that could indicate chain [...]

Snow tires generally have lower speed ratings than what was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph (120 km/h). TIRE ROT A TION RECOMMENDA TIONS T ires on the front and r ear axles of vehicles operate at differ ent loads and perform different steering, driving, and braking functions. For thes[...]

Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cross” as shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The T ire Pressur e Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recommended co[...]

• The TPM System will warn the driver of a low tire pressur e if the tire pressur e falls below the low- pressur e warning limit for any reason, including low temperature ef fects. • The TPM System will continue to warn the driver of low tire pr essure as long as the condition exists, and will not turn off until the tir e pressure is at or abov[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. After-market wheels can cause s[...]

Base System — If Equipped The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pr essure readings to the Receiver Module. NOTE: It is particularly important for you to check the tire pr [...]

warning limit in any of the four active road tir es. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. Check TPMS W arning The T ire Pressur e Monitoring T elltale Light will flash on and off for 60 seconds and an audible chime will sound when a system fault is detected[...]

values flashing. Should this occur , you should stop as soon as possible, and inflate the tires with low pr essure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placar d pressure value. Once the system receives the updated tir e pressures, the system will automatically update, the graphic display in the EVIC will stop fla[...]

of a road tir e that has a pressure below the low- pressur e warning limit, the T ire Pr essure Monitoring T elltale Light will remain ON and a chime will still sound each ignition key cycle. In addition, the EVIC will still display a low-pressur e message and a flash- ing pressur e value in the graphic display . Once you repair or r eplace the ori[...]

NOTE: Y ou can change the pressur e units to display in PSI, kP A, or BAR. Refer to “Language,” under “Personal Settings (Customer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Sec- tion 4 of this manual for details. If the ignition key is cycled, this sequence will repeat, providing the system fault[...]

Over 40 automobile manufacturers ar ound the world have issued and endorsed consistent gasoline specifica- tions (the W orld W ide Fuel Charter , WWFC) which define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer r ecommends the use of gaso- lines that meet the WWFC spec[...]

MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber . Gasolines blended with MMT offer no performance advantage beyond gasolines of the same octane number without MMT . Gasolines blended with MMT have shown to reduce spark plug life and r educe emission system performanc[...]

• The use of fuel additives, which are now being sold as octane enhancers, are not r ecommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting fr om the use of such fuels or additives are not the responsibility of the manufactur er . NOTE: Intentional tampering with em[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. Push in on the left side (near the edge) of the fuel filler door to access the fuel filler cap. If the gas cap is lost or damaged, be sure the r eplacement cap is for use with this vehicle. NOTE: When removing the fuel filler ca[...]

CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light to turn on. • T o avoid fuel spillage and overfilling, do not ?[...]

Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC). If this occurs, tighten the fuel filler cap properly and pr ess the odometer reset button to turn off the messa[...]

• Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the V ehicle Identification Number (VIN). Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle W[...]

Loading T o load your vehicle properly , first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely befor e driving. If weighing the loaded vehicle shows that you have exceeded either GA WR, but the total load is within t[...]

NOTE: Refer to the “V ehicle Certification Label” at- tached to the rear of the driver’s door for your vehicle’s GVWR and GA WRs. This table is only an example. TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefull[...]

W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) T ongue weight (TW) is the downward for ce exerted on the hitch ball by the trailer . In most cases it should not b[...]

W ARNING! • An improperly adjusted W eight Distributing Hitch system may reduce handling, stability , braking performance, and could result in an acci- dent. • W eight Distributing Systems may not be compat- ible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational V ehicle dealer for additiona[...]

T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your authorized dealer for package content. The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and shou[...]

Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 6.1L Automatic 40 SQ. FT . (3.72 square meters) Up to 2 persons & Lug- gage 3,800 lbs (1724 kg) 380 lbs (172 kg) 40 SQ. FT . (3.72 square meters) Up to 3 persons & Lug- gage 3,000 lbs (1361 kg) 300 lbs (136 kg) 40 SQ. FT . (3.72 square meters) Up to 4 persons &[...]

Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. [...]

W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou[...]

− Proper tir e inflation pressures ar e essential to the safe and satisfactory operation of your vehicle. Refer to “T ires–General Information” in this section for infor- mation on tire pr essures and for proper tir e inflation procedur es. − Also, check the trailer tires for pr oper tire inflation pressur es before trailer usage. − Che[...]

W ARNING! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- tem and cause it to fail. Y ou might not have brakes when you need them and could have an accident. T owing any trailer will increase your stopping dis- tance. When towing, you should allow for additional space between your vehicle a[...]

T owing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away fr om heavy traffic. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. However , if frequent shifting occurs while in this range, the “3” range should be selected. NOTE: Using the “3” [...]

T owing T ips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − Use speed control in flat terrain and with light loads to maximize fuel efficiency . T [...]

RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Recreational towing for this vehicle is not r ecommended. NOTE: If the vehicle requir es towing, make sure all four wheels are of f the ground. GROUND CLEARANCE CAUTION! Damage to the front and rear fascias can o[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher ................. 2 7 6 m If Y our Engine Overheats ................ 2 7 6 m TIREFIT T ire Repair .................... 2 7 7 m Jump-Starting Procedur es ................ 2 8 2 m Freeing A Stuck V ehicle ................. 2 8 5 m T owing A Disabled V ehicle ............... 2 8 6 ▫ W it[...]

HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel. When the Hazar d W arn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emer[...]

NOTE: There ar e steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control[...]

1. Air pump hose 2. Power plug and cable 3. Air pump switch 4. Pressur e gauge 5. TIREFIT sealant bottle 6. TIREFIT sealant hose TIREFIT Location TIREFIT contents 278 WHA T TO DO IN EMERGENCIES[...]

W ARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a[...]

5. Unscrew the valve cap fr om the valve on the deflated tire. 6. Screw the fitting at the end of TIREFIT sealant hose (6) coming from the sealant bottle (5) onto the tir e valve. 7. Insert the power plug (2) into the power point on the instrument panel. 8. Leave the parking brake set and the transmission selector lever in P ARK and start the engin[...]

19. W ith a tire pr essure of no less than 26 psi (1.8 bar) press the air pump switch (3) to 0 (OFF) and turn of f the engine. Then, disconnect the TIREFIT system from the tire and place it back in the vehicle. 20. Release the parking brake and drive the vehicle for approximately 10 minutes to ensur e optimum distribu- tion of the tire sealant with[...]

• Do not operate the electric air pump for more than eight minutes to avoid overheating. The air pump may be used again once it has cooled down. • Replace the TIREFIT sealant bottle (5) once every four years to assure optimum operation of the system. • If TIREFIT is liquid, clean water and a damp cloth will remove the material fr om the vehic[...]

NOTE: The battery is stored under a hinged access cover in the load floor in the cargo ar ea. Remote battery terminals are located in the engine compartment for jump-starting. 1. W ear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 2. When boost is provided by a battery[...]

6. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground (-) of the vehicle with the discharged battery . Make sure you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections. W ARNING! • Y ou should not try to start your vehicle by push- i[...]

8. When removing the jumper cables, r everse the above sequence exactly . Be careful of the moving belts and fan. W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster v[...]

CAUTION! • When “rocking” a stuck vehicle by moving be- tween “First” and R (Reverse), do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result. • Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 35 m[...]

operative, or if the vehicle is to be towed more than 30 miles (48 km), the vehicle must be transported using a flat bed truck. CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • If the transmission is not operative, or if the vehicle is to be towed more than [...]

[...]

MAINT AINING YOUR VEHICLE CONTENTS m 6.1L Engine Compartment ............... 2 9 1 m Onboard Diagnostic System — OBD II ...... 2 9 2 ▫ Loose Fuel Filler Cap .................. 2 9 2 m Emissions Inspection And Maintenance Programs ............................ 2 9 3 m Replacement Parts ..................... 2 9 4 m Dealer Service ................[...]

▫ W indshield W ashers/Rear W indow W asher . . . 305 ▫ Exhaust System ...................... 3 0 6 ▫ Cooling System ....................... 3 0 7 ▫ Hoses And V acuum/V apor Harnesses ....... 3 1 1 ▫ Fuel System ......................... 3 1 2 ▫ Brake System ........................ 3 1 2 ▫ Automatic T ransmission ................ 3 1[...]

6.1L ENGINE COMP ARTMENT MAINT AINING YOUR VEHICLE 291 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states, which [...]

b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station. If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance servic[...]

CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil Road conditions and your kind of driving affect the interval at which your oil should be changed. Check the following list to see if any apply to you. • Day or night temperatures ar e below 32°F (0°C). • Stop [...]

NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever comes first. Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories [...]

Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can b[...]

Engine Air Cleaner Filter For normal driving conditions, inspect and replace the engine air cleaner filter at the intervals shown on Sched- ule “A.” For vehicles driven frequently in dusty or under severe conditions, inspect and r eplace the engine air cleaner filter at the intervals shown on Schedule “B.” W ARNING! The air induction system[...]

CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly . Contin- ued operation of your vehicle with a severe malfunction could cause the co[...]

• Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very r ough idling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently s[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. K[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information b[...]

Refer to the “Maintenance Schedule” in this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is n[...]

The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar t Lock Cylinder Lubricant or equivalent directly into the lock cylinder . Wiper Blades Clean the rubber edges of the wiper blades and the windshield and rear window periodically with a spo[...]

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the [...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and refilled at the intervals shown on the Maintenance Schedule. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to r emove all deposits and chemicals. Pro[...]

Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. P[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove the pressure cap whi[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check cool[...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks are present. Components should be replaced immediately if ther e is any evidence of wear or damage that could cause failure. Fuel System The Electronic Fuel Injection high-pr essure [...]

Insure nylon tubing in these ar eas has not melted or collapsed. Inspect all hose connections such as clamps and cou- plings to make sure they ar e secure and no leaks are present. NOTE: • Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant operations to facilitate the assembly of hoses to couplings. The[...]

brakes, fluid level can be expected to fall as the brake pads wear . However , low fluid level may be caused by a leak and a checkup may be needed. Use only manufacturer’s r ecommended brake fluid. Re- fer to “Fluids, Lubricants, and Genuine Parts” for the correct fluid type. W ARNING! • Overfilling the brake fluid reservoir can result in s[...]

CAUTION! • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufac- turer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and [...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and chemicals that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your [...]

CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the [...]

Interior Care Use Mopar t Fabric Cleaner or equivalent to clean fabric upholstery and Mopar t Carpet Cleaner for carpeting. Interior T rim should be cleaned starting with a damp cloth, or Mopar t Satin Select. Do not use harsh cleaners or Armorall. Use Mopar t T otal Clean to clean vinyl upholstery . Mopar t T otal Clean is specifically recommended[...]

cleaner . Use caution when cleaning the inside rear win- dow equipped with electric defrosters or the right r ear quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments, which may scratch the elements. When cleaning the rear view mirr or , spray cleaner on the towel or rag that you are using. Do not spray cle[...]

• Carefully tuck the fr ont, followed by the rear , then side edges of the cup holder into the center console. FUSES (POWER DISTRIBUTION CENTERS) Fuses (Front Power Distribution Center) A power distribution center is located in the engine compartment. This center contains fuses and relays. Cavity Car- tridge Fuse Mini Fuse Description 1— — ?[...]

Cavity Car- tridge Fuse Mini Fuse Description 1 1 — 25 Amp Clear Auto Shutdown/ Powertrain Control Module (PCM) 1 2——— 1 3——— 14 — 25 Amp Clear Powertrain Control Module (PCM) 15 — 20 Amp Y ellow Injectors, Ignition Coils 1 6——— 17 30 Amp Pink — Anti-lock Brakes System (ABS) V alves/ Powertrain Control Module (PCM) 18 30 A[...]

CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse havi[...]

Cavity Car- tridge Fuse Mini Fuse Description 1 60 Amp Y ellow — Ignition Off Draw (IOD) 2 40 Amp Green — Battery 3— — — 4 40 Amp Green — Battery 5 40 Amp Green — Heated Seats - if equipped 6 — 20 Amp Y ellow Fuel Pump 7 — 20 Amp Y ellow Amplifier — Subwoofer 8 — 15 Amp Blue Ignition Switch/Airbag Control Module (ACM) 9 — 20[...]

Cavity Car- tridge Fuse Mini Fuse Description 2 3——— 2 4——— 2 5——— 2 6——— 27 — 10 Amp Red Airbag/Airbag Control Module (ACM) 28 — 10 Amp Red Curtain Airbag - if equipped 29 — 5 Amp Orange Anti-lock Brakes Module/Cluster/Front Control Module (FCM)/ Powertrain Control Module (PCM)/Sentry Key Remote Keyless Entry/Stop Lig[...]

Cavity Car- tridge Fuse Mini Fuse Description 38 — 5 Amp Orange Overhead Console 39 — 10 Amp Red Heated Mirrors - if equipped 40 — 10 Amp Red Heated Seats - if equipped/Inside Rear- view Mirror 41 — 10 Amp Red T ire Pressur e Monitoring - if equipped 42 30 Amp Pink — Front Blower Motor 43 30 Amp Pink — Amplifier - if equipped/ Antenna/R[...]

VEHICLE STORAGE If you are leaving your vehicle dormant for mor e than 21 days, you may want to take steps to protect your battery . Y ou may: • Disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, r un the air conditioning system at idle for about fi[...]

LIGHT BULBS — Exterior Bulb Number Low Beam Headlight ..................... 9006 High Beam Headlight ..................... 9005 Front Park/T urn Light ................... 3457A Front Fog Light—If Equipped . . . 9145/H10 (Ser viced at Dealer) Front Side Marker ........ 194NA (Serviced at Dealer) T ail/Stop/T urn Light ............... 3157KP27/7W[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. T ail/Stop, T urn Signal Light, and Backup Light 1. Open the liftgate. 2. Remove tail light access cover . 3. Push the electrical connector locking tab to th[...]

6. Remove 2 push pin fasteners under the liftgate with a flat blade tool. 7. Pull tail light assembly clear from vehicle to access bulbs. 8. T urn the appropriate bulb and socket assembly counter-clockwise to r emove it from the tail light assem- bly . 1 — T ail/Stop Light Bulb MAINT AINING YOUR VEHICLE 329 7[...]

9. Pull the bulb out of the socket assembly . 10. Push the replacement bulb into the socket assembly . 1 1. Reinstall the bulb and socket assembly into the tail light assembly , and then turn it clockwise. 12. Reinstall the tail light assembly , fasteners, and elec- trical connector . 13. Close the liftgate. 2 — T urn Signal Light Bulb 3 — Back[...]

License Light 1. Remove the screws securing the light to the r ear fascia. 2. Remove the bulb and socket assembly . 3. Pull the bulb out of the socket assembly . 4. Push the replacement bulb into the socket assembly . 5. Reinstall the bulb and socket assembly . 6. Reattach the light to the rear fascia, and then install the screws. FLUIDS AND CAP AC[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent Engine Oil (6.1 Liter) For best performance and maximum protection under all types of operating conditions, the manufacturer [...]

Chassis Component Fluids, Lubricants, and Genuine Parts Automatic T ransmission Mopar t A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar t DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. Power Steering Reservoir Mopar t Power Steering Fl[...]

[...]

MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ...... 3 3 6 m Maintenance Schedules .................. 3 3 6 ▫ Schedule “B” ........................ 3 3 9 ▫ Schedule “A” ........................ 3 4 9 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

• T axi, police, or delivery service (commercial ser - vice). L • Off-r oad or desert operation. NOTE: If ANY of these apply to you, then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in Schedule “B” in this section. NOTE: If ANY of these apply to you, th[...]

Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery , and clean, and tighten the termi- nals as requir ed. • Check the fluid levels of coolant reservoir and brake master cylinder , and add as needed. • Check all lights and all other electrical items for correct operation. • Check rubber seals on [...]

SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an L . • Day or night temperatures ar e below 32°F (0°C)[...]

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX X Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X R[...]

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.[...]

Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XX XX X Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear brake linings and [...]

Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* X Inspect the front and r ear brake linings and r[...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X Replace [...]

Miles 108,000 1 1 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X X [...]

Miles 123,000 126,000 129,000 132,000 135,000 (Kilometers) (205 000) (210 000) (215 000) (220 000) (225 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X* Inspect the front and r ear brake linings and rotors. X Check[...]

Miles 138,000 141,000 144,000 147,000 150,000 (Kilometers) (230 000) (235 000) (240 000) (245 000) (250 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X Change[...]

SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if r e- quired.* X XXX X Replace the air cleaner filter . X Inspect the front and r ear [...]

Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X X X X X Inspect the air cleaner filter and replace if requir ed.* XX X X X Replace the air cleaner filter . X Inspect the front and r ear brake li[...]

Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X [...]

Miles 108,000 1 14,000 120,000 126,000 132,000 (Kilometers) (180 000) (190 000) (200 000) (210 000) (220 000) [Months] [108] [114] [120] [126] [132] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and r[...]

Miles 138,000 144,000 150,000 (Kilometers) (230 000) (240 000) (250 000) [Months] [138] [144] [150] Change engine oil and engine oil filter . X X X Inspect the air cleaner filter and replace if r equired.* X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors. X Replace the air conditioning filter . X Rotate th[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 3 5 6 ▫ Prepar e For The Appointment ............ 3 5 6 ▫ Prepar e A List ........................ 3 5 6 ▫ Be Reasonable W ith Requests ............. 3 5 6 m If Y ou Need Assistance .................. 3 5 6 m W arran[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center . Any communication to the Manufacturer’s Customer Center should include the following [...]

Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er’s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer’s Service Contracts. If you purchased a manufactur er’s Service Contract, you will[...]

REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer . If NHTSA receives similar complaints, it may[...]

Corporation vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, dia- grams, and charts. • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix p[...]

T readwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under contr olled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tir es depends upon th[...]

W ARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure. 362 IF YOU NEED CONSUMER ASSIST ANCE[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) ............. 2 1 9 Adding Engine Coolant (Antifreeze) ......... 3 0 9 Adding Fuel .......................... 2 5 7 Adding Rear W asher Fluid ................ 1 9 8 Adding W asher Fluid .............. 100,198,305 Adjustable Pedals ....................... 1 0 2 Air Cleaner , Engine (Engine Air Cleaner Filter) ...........[...]

Fluid Change ........................ 3 1 5 Fluid Level Check ..................... 3 1 4 Fluid T ype .......................... 3 3 3 Shifting ............................. 2 1 1 Special Additives ..................... 3 1 5 Autostick .......................... 213,215 Ball Joints ............................ 3 0 4 Battery ........................[...]

Rollaway T onneau Cover ............... 1 2 1 T ri-Fold Load Floor .................... 1 1 9 W aterproof Liner ..................... 1 2 3 Cargo T ie-Downs ....................... 1 2 5 Cassette T ape and Player Maintenance ....... 1 8 5 Catalytic Converter ..................... 2 9 9 CD (Compact Disc) Player ............. 155,162 Cellular Phone .[...]

Data Recorder , Event ..................... 4 7 Daytime Running Lights .................. 9 5 Dealer Service ......................... 2 9 4 Defroster , Rear W indow .................. 1 9 8 Defroster , W indshield ............... 59,188,193 Delay (Intermittent) W ipers ............. 99,197 Diagnostic System, Onboard ............... 2 9 2 Dimmer Sw[...]

Oil Filler Cap ........................ 2 9 7 Oil Selection ...................... 297,331 Overheating ......................... 2 7 6 T emperature Gauge ................... 1 3 6 Enhanced Accident Response Feature ......... 4 6 Ethanol .............................. 2 5 4 Event Data Recorder ..................... 4 7 Exhaust Gas Caution ..........[...]

Hoses .............................. 3 1 2 Methanol ........................... 2 5 4 Octane Rating ..................... 253,332 Requirements ..................... 253,331 T ank Capacity ........................ 3 3 1 Fuel System Caution .................... 2 5 8 Fueling .............................. 2 5 7 Fuses ................................ [...]

HomeLink t (Garage Door Opener) T ransmitter ........................... 1 0 7 Hood Release .......................... 9 2 Hoses ............................. 3 1 1,312 Ignition ............................... 1 1 K e y ................................ 1 1 Ignition Key Removal .................... 1 1 Illuminated Entry ....................... 1 7 I[...]

Anti-Lock ........................ 142,221 Automatic Headlights ................... 9 4 Brake Assist W arning .................. 2 2 7 Brake W arning .................... 139,219 Bulb Replacement ..................... 3 2 6 Courtesy/Reading .................. 97,106 Cruise ............................. 1 3 5 Daytime Running ...................... 9[...]

Child Protection ....................... 2 3 Door ............................... 2 1 Power Door .......................... 2 2 Low T ire Pressur e System ................ 2 4 6 Lower Anchors and T ether for CHildren (LA TCH) ............................ 51,53 Lubrication, Body ....................... 3 0 4 Luggage Rack (Roof Rack) ................[...]

Dipstick ............................ 2 9 5 Disposal ............................ 2 9 8 Filter ........................... 298,332 Filter Disposal ....................... 2 9 8 Materials Added to .................... 2 9 7 Recommendation .................. 297,331 V iscosity ......................... 297,331 Onboard Diagnostic System ............ 2[...]

Radio, Navigation ...................... 1 7 3 Radio Operation .................. 155,162,186 Radio Remote Controls .................. 1 8 3 Radio, Satellite ...................... 174,179 Radio (Sound Systems) ................ 155,162 Rear Liftgate ........................... 2 8 Rear Seat, Folding ....................... 9 1 Rear W asher Fluid ..[...]

Front Seat ......................... 31,32 Operating Instructions .................. 3 2 Pretensioners ......................... 3 6 Rear Seat ............................ 3 1 Reminder ........................... 1 3 8 Untwisting Procedur e ................... 3 6 Seats ................................. 8 7 Heated .............................. 8 9[...]

Steering Wheel Mounted Sound System Controls ........................ 1 8 3 Storage ............................ 1 18,326 Storage, V ehicle ..................... 195,326 Storing Y our V ehicle ..................... 3 2 6 Sun Roof ............................. 1 1 2 Sunglasses Storage ...................... 1 0 6 Supplemental Restraint System - Airb[...]

Behind a Motor Home ................. 2 7 3 Disabled V ehicle ...................... 2 8 6 Guide .............................. 2 6 5 Recreational ......................... 2 7 3 W eight ............................. 2 6 5 T owing V ehicle Behind a Motor Home ....... 2 7 3 T raction Control ........................ 2 2 3 T railer T owing ..........[...]

V ideo Entertainment System (Rear Seat V ideo System) ......................... 1 7 7 W arning Flasher , Hazard ................. 2 7 6 W arning Lights (Instrument Cluster Description) ..................... 1 3 5 W arnings and Cautions .................... 6 W arranty Information .................... 3 5 8 W asher , Adding Fluid .............. 100,[...]

2007 OWNER’ S MANUAL 2007 MAGNUM SR T8 81-226-0722 First Edition Printed in U.S.A.[...]