Dodge 2008 JS Avenger Sedan инструкция обслуживания

A venger OWNER’ S MANUAL 2008 2008 A venger 81-226-0830 Second Edition Printed in U.S.A.[...]

VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. Y our driving ability can be seriously impair ed with blood alcohol levels [...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 8 1 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

[...]

INTRODUCTION CONTENTS m Introduction ........................... 4 m How T o Use This Manual .................. 4 m W arnings And Cautions ................... 6 m V ehicle Identification Number ............... 6 m V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents. Y ou ar e urged to r ead these publications carefully . Following the in[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entir e manual you may miss important infor- mation. Observe all W arnings and Cautions. VEHICLE IDE[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W or d About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 4 ▫ Locking Doors W ith The Key .............. 1 4 m Sentry Key t ........................... 1 4 ▫ Replacement Keys ...................... 1 6[...]

▫ Using The Express Down W indows Feature — If Equipped .......................... 2 5 ▫ Using The Panic Alarm .................. 2 5 ▫ Programming Additional T ransmitters ........ 2 6 ▫ Battery Replacement .................... 2 6 ▫ General Information .................... 2 7 m Remote Start System — If Equipped .......... 2 8 ▫ H[...]

▫ Seat Belt Pretensioners ................... 4 8 ▫ Enhanced Seat Belt Reminder System (BeltAlert t ) .......................... 4 8 ▫ BeltAlert t Programming ................. 4 9 ▫ Automatic Locking Mode ................ 5 0 ▫ Seat Belts And Pregnant W omen ............ 5 0 ▫ Supplemental Restraint System (SRS) - Airbag . .51 ▫ Airb[...]

A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. IGNITION KEY REMOV AL Automatic T ransaxle Place the shift lever in P ARK. T urn the ignition switch [...]

NOTE: • If you try to remove the key befor e you place the selector lever in P ARK, the key may become trapped temporarily in the ignition switch lock cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition switch lock cylinder to war[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. KEY -IN-IGNITION REMINDER Opening the driver’s door when the key is in the ignition, sounds a signal to remind you to r emove the key . NOTE: • The Key-In-Ignition reminder only sounds when the igniti[...]

the vehicle. The system will shut the engine off in two seconds if someone uses an invalid key to try to start the engine. NOTE: A key that has not been programmed is also considered an invalid key , even if it is cut to fit the ignition switch lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the V ehic[...]

Replacement Keys NOTE: Only keys that are pr ogrammed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key t is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove the Sentry Keys t from the vehicle and lock all doors when leaving the vehicle unattended. At the time of [...]

3. Insert the second valid key into the ignition switch. T urn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addi- tion, the V ehicle Security Light will begin to flash. T urn the ignition switch to the LOCK position and remove the second key . 4. Insert a blank Sentry Key t into the ignition swi[...]

• This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation. SECURITY ALARM SYSTEM — IF EQUIPPED The V ehicle Security Alarm (VSA) system monitors the doors and trunk for unauthorized entry and ignition switch for unauthorized operation. If something triggers the alarm, the syste[...]

will automatically disarm. After 16 seconds, the V ehicle Security Light will flash slowly . This shows that the system is fully armed. NOTE: • During the 16 second arming period, if a door is opened or the ignition switch is turned ON, the system will automatically disarm. • Once armed, the system disables the unlock switch on the driver door [...]

If the alarm system is armed and the battery becomes disconnected the system will remain armed when the battery is reconnected. The exterior lights will flash, the horn will sound, and the ignition will not start the vehicle. If this occurs, disarm the system. T amper Alert If the alarm was triggered, but the warning signals have timed out, the par[...]

REMOTE KEYLESS ENTR Y — IF EQUIPPED This system allows you to lock or unlock the doors, open the trunk, or activate the P ANIC alarm fr om distances a maximum of 66 ft (20 m) using a hand-held radio transmitter . The transmitter need not be pointed at the vehicle to activate the system. NOTE: The line of transmission must not be blocked with meta[...]

TO UNLOCK THE DOORS Press and r elease the UNLOCK button on the transmitter once to unlock the driver’s door , or twice to unlock all doors. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system (if equipped) will also turn on. Remote Key Unlock, Driver Door/All Doors First This feature lets you pr ogram[...]

Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. Flash Lights W ith Lock The feature will cause the turn signal lights to flash when the doors are locked or unlocked with the transmitter . This feature can be turned on or turned of f. T o change the curr[...]

Illuminated Approach — If Equipped This feature activates the headlights for up to 90 seconds when the doors are unlocked with the transmitter . The time for this feature is pr ogrammable on vehicles equipped with EVIC. For details, refer to “Illuminated Approach,” under “Personal Settings (Customer Pr o- grammable Features), under “Elect[...]

NOTE: Pressing the LOCK button on the transmitter while you are in the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. TO UNLA TCH THE TRUNK Press the TRUNK button on the transmitter two times to unlatch the trunk. USI[...]

PROGRAMMING ADDITIONAL TRANSMITTERS Refer to SENTR Y KEY t “Sentry Key t Programming.” If you do not have a programmed transmitter , contact your authorized dealer for details. BA TTER Y REPLACEMENT The recommended r eplacement battery is CR2032. NOTE: Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/per[...]

GENERAL INFORMA TION This device complies with part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: Changes or mod[...]

REMOTE ST ART SYSTEM — IF EQUIPPED Remote start conveniently starts the engine from outside the vehicle by using the Remote Keyless Entry (RKE) key fob while maintaining security . The system has a targeted range of up to 328 ft (100 m). The vehicle must be locked, the deck lid and hood closed and the transmission gear selector lever in P ARK in [...]

HOW TO USE REMOTE ST ART All of the following conditions must be met before the engine will remote start: • Shift the gear selector lever into P ARK. • Doors closed. • Hood closed. • T runk closed. • Hazard switch of f. • Brake switch inactive (brake pedal not pressed). • Ignition key removed fr om ignition switch. • Battery at an a[...]

T o Exit Remote Start Mode And Drive The V ehicle Before the end of the 15-minute cycle, pr ess and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, within 15 minutes, insert the key into the ignition switch and turn the switch to the ON position. NOTE: The ignition swi[...]

W ARNING! • For personal security , and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Un[...]

POWER DOOR LOCKS A door lock switch is located on the driver and passenger door panel. Press this switch to lock or unlock the doors. Automatic Door Locks — If Equipped The auto door lock feature can be enabled or disabled by your authorized dealer . See your dealer for program- ming. Automatic Unlock Doors On Exit The doors will unlock automatic[...]

Automatic Unlock Doors On Exit Programming The Auto Unlock on Exit feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “Personal Settings (Customer Programmable Featur es)” under “Elec- tronic V ehicle Information Center (EVIC)” in Section 4 of this manual[...]

“CHILD-PROTECTION” DOOR LOCK SYSTEM (REAR DOORS) The Rear Door Child-Protection Locks ar e located inside the rear edge of the door . Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate approximately one—quarter turn to the lock or unlock position (as indicated by the stamped icons). W ARNING! A void trap[...]

NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window , and open the door with the outside door handle. POWER WINDOWS POWER WINDOW SWITCHES The control on the driver’s door has up-down switches that give you fingertip control of all four power win- dows. There is a single window contr[...]

W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death. AUTO WINDOW DOWN — IF EQUIPPED The front window contr ols on the driver and passen[...]

AUTO WINDOW UP — IF EQUIPPED Lift the window switch to the second detent, release, and the window will go up automatically . T o cancel the Auto Up movement, operate the switch either in the up or down direction and r elease the switch. T o close the window part way , lift the window switch to the first detent and release it when you want the win[...]

WINDOW LOCKOUT SWITCH The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window controls on the other doors, pr ess the window lock button. T o enable the window contr ols, press the window contr ol button again. WIND BUFFETING W ind buffeting can be described as the per cep[...]

TRUNK RELEASE From inside the car the tr unk lid can be released by depr essing the T runk Release Button located on the instrument panel to the left of the steering wheel. The transmis- sion must be in Park before the switch will operate. NOTE: The gear selector lever must be in P ARK for this switch to operate. T o unlatch the trunk lid fr om out[...]

TRUNK INTERNAL EMERGENCY RELEASE NOTE: As a security measure, a T runk Internal Emer- gency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-the-dark handle attached to the trunk latching mechanism. OCCUP ANT RESTRAINTS Som[...]

• Supplemental Side Airbag Inflatable Curtains (SABIC) that span the front and second r ows for sedans — if equipped • Supplemental seat side (Thorax) airbags — if equipped • Front seat belt r etractors incorporate pretensioners to enhance occupant protection by managing occupant energy during an impact event. • All seat belt systems (e[...]

Buckle up even though you are an excellent driver , even on short trips. Someone on the road may be a poor driver and cause a collision that includes you. This can happen far away from home or on your own str eet. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injurie[...]

W ARNING! • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • T wo people should never be belted into a single seat belt.[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your stron- gest bones will ta[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can’t do its job as well. In a collision, it could even cut into you. Be sure the[...]

1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the[...]

REAR SEA T BEL TS Three point belts ar e nonadjustable for outboard and center rear passengers on sedans. The center belt is mounted to the rear shelf panel and exits thr ough a bezel in the panel. SEA T BEL T PRETENSIONERS The seat belts for both front seating positions ar e equipped with pretensioning devices that ar e designed to remove slack fr[...]

BeltAlert t will be reactivated if the driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h). BEL T ALERT T PROGRAMMING BeltAlert t can be enabled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the first 60 seconds of the igniti[...]

AUTOMA TIC LOCKING MODE In this mode, the shoulder belt is automatically pre- locked. However , the belt will still retract to r emove any slack in the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions. Use the Automatic Locking Mode anytime a child safety seat is installed in a passenger seating position. Ch[...]

Seat Belt Extender If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough. When it is not requir ed, remove the extender , and[...]

NOTE: The front airbags ar e certified to the Federal regulations that allow less for ceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. This vehicle may also be equipped with window bags to protect the driver [...]

• Front Seat— side mounted (Thorax) Airbags — If Equipped • Front Impact Sensors • Side Impact Sensors (If Equipped) • Steering Wheel and Column • Instrument Panel • Seat Belt Reminder Light • Knee Impact Bolster • Front Seat Belt Pr etensioners FRONT SEA T AIRBAG FEA TURES The front airbag system has dual-stage driver and fr on[...]

Front Passenger Airbag Special Features A new active venting front-passenger airbag is designed to reduce the risk of occupants who may be out of position by the use of active vents positioned on each side of the airbag. Supplemental Front Seat-Mounted Thorax Side Airbags — If Equipped Front seat mounted side (Thorax) airbags pr ovide en- hanced [...]

Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped Supplemental Side Airbag Inflatable Curtain (SABIC) Airbags offer side-impact pr otection to front and rear seat outboard occupants in addition to that pr ovided by the body structur e. Each airbag features inflated chambers place adjacent to the head of each outboard occupant that[...]

W ARNING! • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing. • Do not use accessory seat covers or[...]

The seat belts are designed to pr otect you in many types of collisions. The front airbags deploy in moderate to severe fr ontal collisions. If your vehicle is equipped, the side airbag on the crash side of the vehicle is triggered in moderate to severe side collisions. In certain types of collisions, both the front and side airbags may be trig- ge[...]

3. The driver and front passenger seats should be moved back as far as practical to allow the front airbags room to inflate. 4. If your vehicle has side airbags, do not lean against the door , airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disab[...]

AIRBAG DEPLOYMENT SENSORS AND CONTROLS Occupant Restraint Controller (ORC) The Occupant Restraint Controller System (ORC) is part of a Federally regulated safety system r equired for this vehicle. The ORC determines if a frontal collision is sever e enough to requir e the airbags to inflate. Based on the sensor signals, a central electronic Occupan[...]

W ARNING! Ignoring the AIRBAG light in your instrument panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away . Impact Sensors T wo sensors, located on the fr ont body structur e, trigg[...]

(ORC) to properly classify the fr ont passenger and calcu- late the proper airbag deployment. Do not make any modifications to the front passenger seat components, assembly , or to the seat cover . The following requir ements must be strictly adhered to: • Do not make any modifications to the front passenger seat components, assembly , or to the [...]

Enhanced Accident Response System In the event of an impact that causes airbag deployment, with the vehicle stopped, and the vehicle communication network intact, and the power intact, the Enhanced Accident Response System performs the following func- tions: • Cuts off fuel to the engine • Flashes hazard lights • T urns on the interior lights[...]

process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or thr oat irritation, move to fresh air . If the irritation continues, see your doctor . If these particles settle on your clothing, [...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

Airbag Light Y ou will want to have the airbags r eady to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately . • The AIRBAG light does not come on during the 6 to 8 seconds when the ignition switch is fir[...]

used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and impr ove vehicle perfor- mance. In addition to crash investigations initiated by DaimlerChrysler Corporation, such investigations may be requested by customers, insurance carriers, govern- ment officials, [...]

Data Parameters that May Be Recorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled safety systems, including the airbag system • Airbag disable light status (if equipped) • 9 T ime 9 of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag deployment level (if applicable) • Im[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper [...]

• Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a fr ont passenger airbag. An airbag deployment could cause severe injury or death to infants in this position. Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle.[...]

Here are some tips on getting the most out of your child restraints: • Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the lap/shoulder belt in a rear seat. • Before buying any r estraint system, make sure[...]

around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position. • Buckle the child into the seat according to the child restraint manufactur er’s directions. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it f[...]

Rear Seat LA TCH Anchors Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage have been available for some time. In fact, many child restraint manufactur ers will provide add-on tether strap kits for some [...]

have tether straps, and you are ur ged to take advantage of all of the available attachments provided with your child restraint in any vehicle. NOTE: When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en. It is recommen[...]

window . These tether strap anchorages ar e under a plastic cover with this symbol on it. Many , but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Forward- facing toddler restraints and some r[...]

the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle. W ARNING! Improper installation of a child restraint to the LA TCH anchora[...]

between the two posts. If not possible, lower the head restraint and pass the tether strap ar ound the outboard side of the head restraint. 3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child r estraint manufacturer’s instruc- tions. W ARNING! An incorrectly anch[...]

In the rear seat, you may have tr ouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate fr om the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release[...]

Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts. ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your vehicle. Drive moderately during the first 300 mi (500 km). After the initial 60 mi (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desi[...]

Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle in or out of the area. If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling contr ols to force outside air into the vehicle. Set the blower at high speed. W ARNING! If you are required to drive w[...]

Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield. NOTE: If the defrost featur e is not functioning, the cause should be located and corrected immediately by an authorized service center . The windshield could fog up while driving a[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 8 5 ▫ Inside Day/Night Mirror — If Equipped ...... 8 5 ▫ Automatic Dimming Mirror — If Equipped .... 8 6 ▫ Electric Remote-Control Mirr ors ............ 8 6 ▫ Adjusting Side V iew Mirrors .............. 8 7 ▫ Illuminated V anity Mirr ors ?[...]

▫ V oice T raining ........................ 1 1 9 m Seats ................................ 1 2 0 ▫ Manual Front Seat Adjustments ........... 1 2 0 ▫ Power Seats — If Equipped .............. 1 2 3 ▫ Heated Seats — If Equpped .............. 1 2 3 ▫ Fold-Flat Front Passenger Seat ............ 1 2 4 ▫ Adjustable Head Restraints ........[...]

▫ Headlights W ith W ipers Feature (A vailable W ith Auto Headlights Only) ...... 1 3 7 ▫ W indshield W ashers ................... 1 3 8 ▫ Adding W asher Fluid .................. 1 3 8 m T ilt/T elescoping Steering Column ........... 1 3 9 m Electronic Speed Contr ol — If Equipped ...... 1 4 0 ▫ T o Activate .......................... 1 4[...]

m Electrical Power Outlets .................. 1 5 3 ▫ Electrical Outlet Use W ith Engine Off ....... 1 5 4 m Cigar Lighter And Ash Receiver — If Equipped . . 155 ▫ Cupholder Ash Receiver — If Equipped ..... 1 5 5 m Console Features ....................... 1 5 6 ▫ Dual Storage Bins ..................... 1 5 6 ▫ V ideo Console — If Equi[...]

MIRRORS INSIDE DA Y/NIGHT MIRROR — IF EQUIPPED Adjust the mirror to center on the view thr ough the rear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should b[...]

AUTOMA TIC DIMMING MIRROR — IF EQUIPPED This mirror will automatically adjust for annoying head- light glare fr om vehicles behind you. Push in the button on the face of the mirror to activate the dimming featur e. CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solut[...]

After selecting a mirror , move the knob in the same direction you want the mirr or to move. When finished, return the knob to the center O (OFF) position to guar d against accidentally moving a mirror position. ADJUSTING SIDE VIEW MIRRORS Outside Mirror — Driver’s Side Adjust the outside mirror to center on the adjacent lane of traffic, with a[...]

Outside Mirror — Passenger’s Side Adjust the convex outside mirror so you can just see the side of your vehicle in the part of the mirror closest to the vehicle. W ARNING! V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cau[...]

HANDS-FREE COMMUNICA TION (UConnect T )— IF EQUIPPED NOTE: The sales code RER, REN and REU radios contain an integrated Hands-Free Communication (UConnect t ) system. Refer to your “Navigation User’s Manual” for UConnect t system operating instructions for these radios. UConnect t is a voice-activated, hands-free, in-vehicle communications [...]

a separate 32-name phonebook accessible only in that language. This system is driven through your Bluetooth t “Hands-Free pr ofile” cellular phone. UConnect t features Bluetooth t technology - the global standard that enables differ ent electronic devices to connect to each other without wires or a docking station, so UConnect t works no matter[...]

can be adjusted either from the radio volume contr ol knob or from the steering wheel radio contr ol (right switch), if so equipped. The radio display will be used for visual prompts fr om the UConnect t system such as 9 CELL 9 or caller ID on certain radios. Operation V oice commands can be used to operate the UConnect t system and to navigate thr[...]

Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say 9 Help 9 following the beep. The UConnect t system will play all the options at any prompt if you ask for help. T o activate the UConnect t system fr om idle, simply press the PHONE button and follow the audible prompts for directions. All UCon[...]

• For identification purposes, you will be prompted to give the UConnect t system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • Y ou will then be asked to give your cellular phone a priority level between 1 and 7, with 1 being the highest priority . Y ou can pair up to seven cellular p[...]

Call by Saying a Name • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say “Call. 9 • The system will prompt you to say the name of the person you want to call. • After the 9 Ready 9 prompt and the following beep, say the name of the person you want to call. For example, you can say 9 John Doe, 9 whe[...]

After you are finished adding an entry into the phone- book, you will be given the opportunity to add more phone numbers to the current entry or to r eturn to the main menu. The UConnect t system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations. Each language has a se[...]

Edit Entries in the UConnect t Phonebook NOTE: Editing names in the phonebook is recom- mended when the vehicle is not in motion. • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Edit. 9 • Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose [...]

from which you choose. T o select one of the entries from the list, pr ess the “V oice Recognition” button while the UConnect t system is playing the desired entry and say 9 Delete. 9 • After you enter the name, the UConnect t system will ask you which designation you wish to delete: home, work, mobile, pager , or all. Say the designation you[...]

• The UConnect t system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed thr ough the UConnect t system if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way[...]

9 Call 9 followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progr ess. T o go back to the first call, refer to 9 T oggling Between Calls 9 in this section. T o combine two calls, refer to 9 Confer ence Call 9 in this section. Place/Retrieve a Call From Hold T o put a call on [...]

hold may not become active automatically . This is cell phone-dependent. T o bring the call back fr om hold, press and hold the PHONE button until you hear a single beep. Redial • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Redial. 9 • The UConnect t system will call the last number that was dia[...]

• After the 9 Ready 9 prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect t language change[...]

Y our phone must be turned on and pair ed to the UConnect t system to allow use of this vehicle feature in emergency situations, when the cell phone has network coverage and stays paired to the UConnect t system. T owing Assistance If you need towing assistance: • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following b[...]

When calling a number with your UConnect t system that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can press the “V oice Recognition” button and say the sequence you wish to enter , followed by the word 9 Send. 9 For example, if requir ed to enter your PIN followed with a pound, (3 7 4 6 #), you c[...]

T urning Confirmation Prompts On/Off T urning confirmation pr ompts off will stop the system from confirming your choices (e.g., the UConnect t sys- tem will not repeat a phone number befor e you dial it). • Press the PHONE button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Setup Confirmations. 9 The UConnect t system w[...]

Mute/Un-Mute (Mute Off) When you mute the UConnect t system, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the UConnect t system: • Press the “V oice Recognition” button. • Following the beep, say 9 Mute. 9 In order to un-mute the UConnect t s[...]

• When prompted, say 9 List Phones. 9 • The UConnect t system will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “select” or “delete” a paired phone being announced, press the “V oice Recogni- tion” button and say “Select” or “Delete.” Also, see the next two sectio[...]

Things Y ou Should Know About Y our UConnect T System UConnect t T utorial T o hear a brief tutorial of the system featur es, press the PHONE button and say “UConnect t T utorial.” V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, the UConnect t system V oice T raining feature may[...]

• Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface,[...]

• In a convertible vehicle, system performance may be compromised with the convertible top down. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather conditions, and • operation fro[...]

1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 11 3[...]

1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 13 3[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. VOICE RECOGNITION SYSTEM ?[...]

Pressing the VR har d-key while the system is speaking is known as “barging in.” The system will be interr upted and you can add or change commands. This will become helpful once you start to learn the options. NOTE: At any time, you can say the words CANCEL, HELP , or MAIN MENU. These commands are universal and can be used fr om any menu. All [...]

Main Menu Start a dialogue by pressing the VR har d-key . Y ou may say MAIN MENU to switch to the main menu. In this mode, you can say the following commands: • RADIO (to switch to the radio mode) • DISC (to switch to the disc mode) • MEMO (to switch to the memo recor der) Radio AM (or Radio Long W ave or Radio Medium W ave - if equipped) T o[...]

Satellite Radio T o switch to satellite radio mode say SA T or SA TELLITE RADIO. In this mode, you may say the following com- mands: • CHANNEL NUMBER (to change the channel by its spoken number) • NEXT CHANNEL (to select the next channel) • PREVIOUS CHANNEL (to select the pr evious chan- nel) • LIST CHANNEL (to hear a list of available chan[...]

− CONTINUE (to continue recor ding) − DELETE (to delete the recor ding) • PLA Y MEMOS (to play previously r ecorded memos) — During the playback you may press the VR har d- key to stop playing memos. Y ou continue by saying one of the following commands: − REPEA T (to repeat a memo) − NEXT (to play the next memo) − PREVIOUS (to play t[...]

SEA TS Manual Front Seat Adjustments Forward/Rearward The adjusting bar is at the front of the seats, near the floor . Pull the bar up to move the seat to the desired position. After releasing the adjusting bar , apply forwar d and rearwar d body pressure to be sur e the seat is latched. Manual Seat Adjusting Bar 120 UNDERST ANDING THE FEA TURES OF[...]

Driver Seat Manual Height Adjuster — If Equipped A lever style height adjustment feature enhances comfort for petite as well as tall drivers. A lever with a ratcheting mechanism, located on the outboard side of the seat, raises and lowers it. T otal travel is 2.2 in. (56 mm). Reclining Bucket Seats The recliner contr ol is on the side of the seat[...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

Power Seats — If Equipped The power seat switches are on the outboar d side of the seat near the floor . Use the front switch to move the seat up, down, forward, r earward, or to tilt the seat. The rear switch controls the seatback r ecliner . CAUTION! Do not place any article under a power seat as it may cause damage to the seat controls. HEA TE[...]

This feature heats leather or cloth fr ont driver and passenger seats. The controls for the heated seats ar e located in the center console below the climate controls. There ar e indicator lights in the switches, which indicate a low heat setting (one light lit) or high heat setting (two lights lit). FOLD-FLA T FRONT P ASSENGER SEA T The recline ha[...]

The hard seatback featur es a work surface and a molded rim for retaining items stor ed on the seat back panel. ADJUST ABLE HEAD RESTRAINTS Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjust the restraints so that the upper edge is as high as practical. T o raise, pull up on the head restraint. T [...]

FOLDING REAR SEA T T o pr ovide additional storage area, the r ear seatback can be folded forward. Pull on the loops shown in the pictur e to fold down either or both seatbacks. When returning the r ear seat back to the upright position, be sure the seat back is latched. W ARNING! The rear cargo area of the vehicle (with the rear seatbacks in the l[...]

FOLDING REAR SEA T CENTER ARMREST The rear seat is equipped with a folding armr est with cup holders. TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be r eleased. First pull the hood release lever located under the left side of the instrument panel. Folding Rear Seat Armrest Hood Release Lever UNDERST ANDING THE FEA TURES OF YOUR VE[...]

Then lift the secondary latch located under the front edge of the hood, near the center and raise the hood. Use the hood prop r od to secure the hood in the open position. Place the upper end of the prop r od in the hole on the left underside of the hood. Before closing the hood, make sur e to stow the prop rod in its proper location. T o prevent p[...]

W ARNING! If the hood is not fully latched it could fly up when the vehicle is moving and block your forward vision. Y ou could have a collision. Be sure all hood latches are fully latched before driving. LIGHTS MAP/READING/INTERIOR LIGHTS These lights are mounted between the sun visors above the rear view mirr or . Each light is turned ON by press[...]

because a door is open. This includes the glove box light, but not the trunk light. T o r estore interior light operation, either turn the ignition switch ON or cycle the light switch. MUL TI-FUNCTION CONTROL LEVER The Multi-Function Control Lever contr ols the operation of the headlights, parking lights, turn signals, headlight beam selection, ins[...]

AUTOMA TIC HEADLIGHT SYSTEM — IF EQUIPPED T urning the end of the multi-function contr ol lever to the third detent, “A” (Auto), will activate the automatic headlight system. W ith the engine running and the multi-function contr ol lever in the “A” (Auto) position, the headlights will turn on and turn off based on the surr ounding light l[...]

NOTE: If the Multi-Function Control Lever is held in the flash to pass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds for the next flash to pass operation. DA YTIME RUNNING LIGHTS (DRL) — IF EQUIPPED The high beam lights will come on as Daytime Running Lights (DRL) at DRL intensity (lower), whenev[...]

NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the fr ont fog lights. TURN SIGNALS Move the Multi-Function Control Lever up or down and the arrows on each side of the instr ument cluster flash to show proper operation of the fr ont and rear turn signal lights. Y ou can sign[...]

If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the fuse or indicator bulb is defective. HIGHBEAM/LOWBEAM SELECT SWITCH Push the Multi-Function Control Lever away fr om you to switch the headlig[...]

Rotate the end of the lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second detent past the intermittent settings for High-speed wiper operation. NOTE: The wipers will automatically return to the P ARK position if you turn of f the ignition switch while they are operating. The wipers will r esume o[...]

INTERMITTENT WIPER SYSTEM Use the intermittent wiper system when weather condi- tions make a single wiping cycle with a variable pause between cycles desirable. Rotate the end of the W ind- shield W iper/W asher Contr ol Lever to the first detent, and then turn the end of the lever to select the desired delay interval. There ar e five delay setting[...]

MIST FEA TURE Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray fr om a passing vehicle. As long as the lever is held down, the wipers will continue to operate. HEADLIGHTS WITH WIPERS FEA TURE (A vailable with Auto Headlights Only) When this feature is active, the headlights will turn ON ap[...]

WINDSHIELD W ASHERS T o use the washer , pull the W indshield W iper/W asher Control lever towar d you and hold it for as long as washer spray is desired. If you activate the washer while the wiper control is in the delay range, the wipers will operate in low speed for two wipe cycles after releasing the lever and then r esume the intermittent inte[...]

TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. T o unlock the steering column, pull the contr ol handle outward. T o til[...]

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Speed Control Lever is located on the right side of the steering wheel. T o Activate: Push in and release the ON/OFF button located in the end of the Electronic Speed Contr ol Lever . The Speed Control[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it. T o Set Desired Speed: When the vehicle has reached the desir ed speed, push down o[...]

T o V ary Speed Setting: When the speed control is ON, speed can be incr eased by pushing up and holding RESUME ACCEL. Release the lever when the desired speed is r eached, and the new speed will be set. Pushing up and quickly releasing the RESUME ACCEL lever will result in a 1 mph (2 km/h) speed incr ease. Each time the lever is pushed upwards and[...]

On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without speed contr ol. GARAGE DOOR OPENER — IF EQUIPPED HomeLink t replaces up to thr ee remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLink t unit opera[...]

W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety stan- dards. This includes most[...]

Y our vehicle should be parked outside of the garage when programming. Begin Programming 1. T urn the ignition switch to the ON/RUN position. 2. Hold the battery side of the hand-held transmitter away from the HomeLink t button you wish to pr ogram. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink t button you wish to pr[...]

If the indicator light stays on constantly , programming is complete and the garage door (or device) should activate when the HomeLink t button is pressed. If the indicator light blinks rapidly for two seconds, and then turns to a constant light, proceed to Step 5 “Pr o- gramming A Rolling Code System.” 5. Programming A Rolling Code System At t[...]

NOTE: There ar e 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7. Return to the vehicle and press the pr ogrammed HomeLink t button twice (holding the button for two seconds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button[...]

GA TE OPERA TOR/CANADIAN PROGRAMMING Canadian radio frequency laws r equire transmitter sig- nals to time-out (or quit) after several seconds of trans- mission – which may not be long enough for HomeLink t to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators ar e designed to time-out in the same manner[...]

TROUBLESHOOTING TIPS If you are having tr ouble programming HomeLink t , here are some of the most common solutions: • Replace the battery in the original transmitter . • Press the “Learn” button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for training, and remember to plug it back in[...]

POWER SUNROOF — IF EQUIPPED The sunroof contr ols are mounted between the sun visors in the Dome/Reading Lamp. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may[...]

SUNROOF OPERA TION Opening Sunroof Manually Press the switch r earward and hold, and the sunroof will open automatically from any position. The sunr oof will open fully , then stop automatically . During this opera- tion, any release of the sunr oof switch will stop the sunroof. Opening Sunroof - Express Press the switch r earward and release, and [...]

SUNSHADE OPERA TION The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. WIND BUFFETING W ind buffeting can be described as the per ception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind [...]

ELECTRICAL POWER OUTLETS There ar e two 12-volt electrical outlets on this vehicle. Both of the outlets are pr otected by a fuse. The instrument panel power outlet, located below the climate control knobs, has power available only when the ignition is on. This outlet will also operate a conventional cigar lighter unit. NOTE: If desired, the instr u[...]

The center console power outlet is powered dir ectly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or pr event engine starting. Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e[...]

CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED CUPHOLDER ASH RECEIVER — IF EQUIPPED An optional ash receiver is available fr om your autho- rized dealer and will fit in the center console front cupholder . CAUTION! For vehicles equipped with the heated and cooled cupholder , locate the cup holder ash receiver in the forward cupholder . The option[...]

CONSOLE FEA TURES The center console armrest slides forwar d from design position to provide added user comfort. T wo cupholders can accommodate large sized fast food beverage contain- ers, and 20 oz (500 ml) bottles. A one-piece cup holder insert for both cavities can easily be removed for clean- ing. DUAL STORAGE BINS Lifting a latch at the front[...]

1. The left latch opens to the top storage area. 2. The lower bin can be accessed directly , without first exposing the upper bin, by operating the right latch with the armrest down. 3. The first storage bin can be used to hold smaller items. 4. The lower storage bin includes a molded-in coin holder , room for CDs, DVDs, and a power outlet that all[...]

• Audio/V ideo RCA Jacks See Section Four , “V ideo Entertainment System-If Equipped,” of this manual, for further information. CUP HOLDERS Heated or Cooled Cup Holder — If Equipped W ith this feature the r ear cavity of the cup holder can keep cool beverages cool, and hot beverages hot. The rear cup holder heats to 140°F (60°C) or cools [...]

CAUTION! Make sure the beverage container can withstand the temperatures shown above, when using the Cooled or Heated Cup Holder . Rear Bottle Holders There ar e built-in bottle holders located in both rear door trim panels. Heated or Cooled Cupholder Rear Bottle Holder UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 159 3[...]

W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury . STORAGE CARGO AREA The 60/40 split-folding rear seat pr ovides cargo-carrying versatility . The seatbacks fold down easily by pulling nylon tabs between the seat[...]

W ARNING! • The weight and position of cargo and passengers can change the vehicle center of gravity and ve- hicle handling. T o avoid loss of control resulting in personal injury , follow these guidelines for loading your vehicle: • Always place cargo evenly on the car go floor . Put heavier objects as low and as far forward as possible. • P[...]

The cooling bin will hold up to four , standing, 12 ounce, beverage cans. The cooler bin is also equipped with a soft molded liner that is removable for easy cleaning. Inside the bin is a vent which, when opened, allows either air conditioned or fresh air to flow into the storage bin. Depending on ambient temperature and A/C set- ting, the bin can [...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel Featur es ................. 1 6 7 m Instrument Cluster — Base ................ 1 6 8 m Instrument Cluster — Pr emium ............. 1 6 9 m Instrument Cluster Descriptions ............ 1 7 0 m Electronic V ehicle Information Center (EVIC) – If Equipped ..........................[...]

▫ Operation Instructions - CD Mode For CD And MP3 Audio Play ...................... 1 9 8 ▫ Notes On Playing MP3 Files ............. 2 0 0 ▫ List Button (CD Mode For MP3 Play) ....... 2 0 3 ▫ Info Button (CD Mode For MP3 Play) ....... 2 0 3 m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) ..............[...]

m Universal Consumer Interface (UCI) — If Equipped ........................... 2 2 7 ▫ Connecting The iPod t Device ............ 2 2 7 ▫ Controlling The iPod t Using Radio Buttons . . . 228 ▫ Play Mode .......................... 2 2 8 ▫ List Or Browse Mode .................. 2 3 0 m Satellite Radio — If Equipped (REN/REQ/RER/RES/REU Rad[...]

▫ Manual Air Conditioning And Heating System . . 242 ▫ Automatic T emperatur e Control (A TC) — If Equipped ......................... 2 4 6 ▫ Operating T ips ....................... 2 5 2 m Rear W indow Features ................... 2 5 6 ▫ Electric Rear W indow Defroster — If Equipped ......................... 2 5 6 166 UNDERST ANDING Y[...]

INSTRUMENT P ANEL FEA TURES Instrument Panel Features UNDERST ANDING YOUR INSTRUMENT P ANEL 167 4[...]

INSTRUMENT CLUSTER — BASE 168 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER — PREMIUM UNDERST ANDING YOUR INSTRUMENT P ANEL 169 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Reminder This is a reminder that the Fuel Filler Door is located on the left side of the vehicle. 3. T emperatur e Gauge The temperature gauge shows engine coolant tem- peratu[...]

5. Low Fuel Light When the fuel level drops to 2 gallons, the fuel symbol will light and a single chime will sound. 6. Charging System Light This light shows the status of the electrical charg- ing system. The light should come on briefly when the ignition is first turned on and remain on briefly as a bulb check. If the light stays on or comes on w[...]

will turn off after the engine is started. If the bulb does not come on during starting, have the system checked by an authorized dealer . If the light comes on and remains on while driving, stop the vehicle and shut off the engine. DO NOT OPERA TE THE VEHICLE UNTIL THE CAUSE IS CORRECTED. The light does not show the quantity of oil in the engine. [...]

The two trip odometers show individual trip mileage. T o switch from odometer to trip odometers, pr ess and release the T rip Odometer button. T o reset a trip odom- eter , display the desired trip odometer to be r eset then push and hold the button until the display resets (ap- proximately 2 seconds). Refer to “T rip Odometer Button” for addit[...]

indicator system is duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the “ON” position. T o turn of f the message temporarily , press and release the T rip Odometer button on the ins[...]

Dual T rip Odometer — If Equipped Press and r elease this button to change the display from odometer to “T rip A.” Press and r elease it a second time to change the display to “T rip B.” Pr ess and release it a third time to change the display back to the odometer . T o r eset the trip odometer , first display the trip mileage that you wa[...]

20. T urn Signal Indicators The arrows will flash in unison with the exterior turn signal, when using the turn signal lever . 21. Front Fog Light Indicator — If Equipped This light shows when the front fog lights ar e ON. 22. Electronic Stability Pr ogram (ESP) Indicator Light The yellow ESP/BAS malfunction indicator light will turn on when the i[...]

Accordingly , when the low tire pr essure telltale illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pr essure. Driving on a significantly under-inflated tir e causes the tire to overheat and can lead to tir e failure. Under-inflation also reduces fuel ef ficiency and tire tread life, and may af[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]

could lead to immediate loss of power or severe catalytic converter damage. The vehicle should be serviced as soon as possible if this occurs. 26. Anti-Lock W arning Light (ABS) This light monitors the ABS. This light will come on when the ignition key is turned to the ON position and may stay on for as long as four seconds. If the ABS light remain[...]

The dual brake system provides a r eserve braking capac- ity in the event of a failure to a portion of the hydraulic system. Failure of either half of the dual brake system is indicated by the Brake W arning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until[...]

the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer . The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake[...]

The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the lower left part of the cluster below the fuel and engine tem- perature gauges. The EVIC consists of the following: • System status • V ehicle information warning message displays • Personal settings (customer programmable featur e[...]

Press and r elease the RESET button to accept a selection. The RESET button also resets various T rip Functions. EVIC DISPLA YS When the appropriate conditions exist, the Electr onic V ehicle Information Center (EVIC) displays the following messages. • T urn Signal On (with a continuous warning chime) • Left Front T urn Signal Light Out (with a[...]

OIL CHANGE REQUIRED Y our vehicle is equipped with an engine oil change indicator system. The Oil Change Required message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is duty cycle based, which means the engine [...]

T o Reset The Display Reset will only occur if a resettable function is curr ently displayed. Press and hold the RESET button once to clear the function currently displayed. T o r eset all resettable functions, pr ess and release the RESET button a second time within three seconds of resetting the curr ently displayed function (Reset ALL will displ[...]

• Elapsed T ime Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the ON or ST AR T position. • Display Units In: T o make your selection, pr ess and release the RESET button until U.S. or METRIC appears. COMP ASS DISPLA Y The compass heading indicates the direction the vehic[...]

4. Press and r elease the RESET button and the “CAL” indicator will quit flashing. 5. Drive the vehicle slowly , completing one or mor e circles (in an ar ea free from lar ge metal or metallic objects) until the “CAL” indicator turns off. The compass will now function normally . Compass V ariance Compass V ariance is the dif ference between[...]

1. T urn the ignition switch to the ON position. Leave the selector lever in P ARK. 2. Press and r elease the MENU button until “Personal Settings” displays in the EVIC. 3. Pr ess and release the STEP button until “Compass V ariance” and the curr ent V ariance V alue displays in the EVIC. 4. Press and r elease the RESET button to increment [...]

Auto Unlock on Exit When ON is selected and the transaxle is in the P ARK or NEUTRAL position, all doors will unlock when the driver’s door is opened. T o make your selection, pr ess and hold the RESET button until ON or OFF appears. Remote Key Unlock When “Driver Door 1st Press” is selected, only the driver’s door will unlock on the first [...]

when exiting the vehicle. T o make your selection, pr ess and hold the RESET button until 0, 30, 60, or 90 seconds appears. Headlights W ith Wipers (A vailable with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on appr oxi- mately 10 seconds after the wipers are turned on. The [...]

RADIO GENERAL INFORMA TION RADIO BROADCAST SIGNALS The radio will provide excellent r eception under most operating conditions. Like any system, however , automo- tive radios have performance limitations, due to mobile operation and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and s[...]

NOTE: The radio, steering wheel radio controls (if equipped), and six-disc CD/DVD changer (if equipped) will remain active for up to 10 minutes after the ignition switch has been turned OFF . Opening a vehicle fr ont door will cancel this feature. SALES CODE RES — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is loc[...]

Power Switch/V olume Control (Rotary) Push the On/V olume control knob to turn on the radio. Push the On/V olume control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping. T urning the On/V olume control knob to the right increas[...]

Phone Button (UConnect t Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect t ) feature (if equipped). Refer to “Hands-Fr ee Communication (UConnect t )” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith UConnect” message wil[...]

INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in e[...]

MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the T une/Scr oll control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information. T oggle the MUSIC TYPE button to se[...]

Program T ype 16-Digit Character Display Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is acti[...]

the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The sta- tions stored in SET 2 memory can be selected by pr essing the pushbutton twice. Every time a preset button is used, a corr espon[...]

begin to play when you insert the disc. The display will show the disc number , the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. Th[...]

the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD, MP3 modes. SCAN Button Press the SCAN button to scan thr ough each track on the CD currently playing. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/F[...]

Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 an[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

Press and hold the INFO button again for thr ee seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and pl[...]

SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the On/V olume co[...]

V oice Recognition Button (UConnect t Hands-Free Phone) — If Equipped Press this button to operate the Hands-Fr ee Phone (UConnect t ) feature (if equipped). Refer to “Hands-Fr ee Communication (UConnect t )” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith UConnect?[...]

The clock can also be set by pressing the SETUP button and selecting the “SET HOME CLOCK” entry . Once in this display follow the above procedur e, starting at Step 2. INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast fr om an FM station (FM mode only). [...]

Push the rotary T une/Scroll control knob a fifth time and F ADE will display . T urn the T une/Scroll contr ol knob to the left or right to adjust the sound level between the front and r ear speakers. Push the rotary T une/Scroll control knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on th[...]

Program T ype 16-Digit Character Display Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to th[...]

• DISC Play/Pause - Y ou can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (if equipped). • DVD Play Options - Selecting the DVD Play Options will display the following: • Subtitle – Repeatedly pressing SELECT will switch subtitles to differ ent subtitle languages that are available on the disc (if equipped[...]

Menu Language — If Equipped Selecting this item will allow the user to choose the default startup DVD menu language (effective only if language supported by disc). If you want to select a language not listed, then scroll down and select 9 other . 9 Enter the four-digit country code using the T une/Scroll control knob to scr oll up and down to sel[...]

Aspect Ratio — If Equipped Selecting this item allows you to choose between wide screen, pan scan, and letter box. AutoPlay — If Equipped When this is set to On and a DVD video is inserted, it will bypass the DVD menu screen and automatically play the movie. In some rare cases, the DVD player may not auto-play the main title. In such cases, use[...]

Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}. DISC Button Pressing the DISC button will allow you to switch fr om AM/FM modes to Disc modes. Operation Instructions[...]

Radio display will show 9 LOADING DISC 9 when the disc is loading and “READING DISC” when the radio is reading the disc. CAUTION! This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the[...]

R W/FF (CD MODE) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased, or RW or another CD button is pressed. The R W (Rewind) button works in a similar manner . AM or FM Button (CD MODE) Switches the radio to the Radio mode. Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , a[...]

Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3/ WMA files). Discs created with an option such as 9 keep disc open after writing 9 are most likely multisession discs. The use of multisession for CD audio or MP3/ WMA playback may result in l[...]

WMA File Format WMA Specification Sampling Fre- quency (kHz) Bit Rate (kbps) WMA 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 T ag information for artist, song title, and album title are supported for ID3 version 1 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pr o files are not supported. Playback of MP[...]

LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the T une/Scr oll control knob. Selecting a folder by pressing the T une/Scroll control knob will begin playing the files contained in that folder (or the next folder in sequence if the [...]

SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press the TIME button to change the display fr om elapsed playing time to time of day . The time of day will display for five seconds. R W/FF (Auxiliary Mode) No function. SET Button (Auxiliary Mode) No function. Operating Instructions [...]

Dolby t Manufactured under license fr om Dolby t Laboratories. 9 Dolby t9 and the double-D symbol are trademarks of Dolby t Laboratories. Macrovision This product incorporates copyright pr otection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright pr otection technology must be authorized[...]

through the system’s wir eless headphones. This means rear seat passengers can watch a DVD on the optional rear seat entertainment system, while the driver and front-seat passenger listen to the radio. Other special features include dir ect tune, music type selections, easy store pr esets, backup camera display for vehicles equipped with a backup[...]

3. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- played. T o move the hour backwar d, touch the screen where the wor d “Hour” with the arrow pointing down- ward is displayed. 4. T o move the minute forward, touch the scr een where the word “Min” with the arr ow pointing upward[...]

T ouch the scr een where the wor ds “Show T ime if Radio is Off” ar e displayed to change the current setting. Changing the T ime Zone 1. T urn on the multimedia system. 2. T ouch the scr een where the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen wher e the words “Set T ime Zone” are displayed. T[...]

The satellite navigation capability combines a Global- Positioning System (GPS)-based navigation system with an integrated color screen to pr ovide maps, turn identi- fication, selection menus, and instructions for selecting a variety of destinations and routes. A shared HDD for the navigation system, the database, and other radio features allows u[...]

Clock Setting Procedure The GPS receiver in this system is synchr onized to the time data being transmitted by the GPS satellites. The satellites’ clock is Greenwich Mean T ime (GMT). This is the worldwide standard for time. This makes the sys- tem’s clock very accurate once the appropriate time zone and daylight savings information is set. Cha[...]

3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” T ouch the screen wher e the words “Daylight Savings” are dis- played to change the current setting. Setting the User Clock If you wish to set the clock to a time differ ent from the system clock, you can manually adjust the time by perform[...]

2. T ouch the scr een where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the box next to the words “Show T ime if Radio is Off.” T ouch the scr een where the wor ds “Show T ime if Radio is Off” ar e displayed to change the current setting. UNIVERSAL CONSUMER[...]

Controlling The iPod T Using Radio Buttons T o get into the UCI (iPod t ) mode and access a connected iPod t , press the AUX button on the radio faceplate. Once in the UCI (iPod t ) mode, the iPod t audio track (if available from iPod t ) will start playing over the vehicle audio system. Play Mode When switched to UCI mode the iPod t will be in Pla[...]

Pressing and r eleasing the FF button will go forward five seconds of the current track. SEEK Buttons Use the SEEK buttons to move to the previous or the next track. If the left (down) button is pressed during the first two seconds of the current track, it will go back to the previous track in the list; if you pr ess this button at any other time i[...]

List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll thr ough the list of menus and tracks on the iPod t device. T une/Scr oll Knob In the List mode, the T une/Scr oll knob functions in a similar manner as the scroll wheel on the iPod t . T urning the T une/Scr oll k[...]

After pressing a pr eset button, you will see the list you are in on the top line and the first item in that list on the second line. T o exit the List mode without selecting a track, pr ess the same preset button again to go back to Play mode. LIST Button Pressing the LIST button will take to the top level menu of the iPod t . This takes you to th[...]

number 888-539-7474, or visit the Sirius web site at www .sirius.com, or at www .siriuscanada.ca for Cana- dian residents. Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Y our V ehicle Identificat[...]

Selecting Satellite Mode Press the SA T button until 9 SA T 9 appears in the display . A CD may remain in the radio while in the Satellite radio mode. Satellite Antenna T o ensur e optimum reception, do not place items on the roof ar ound the rooftop antenna location or strap items to the trunk lid ar ound the trunk lid antenna (if equipped). Metal[...]

SCAN Button Pressing the SCAN button causes the tuner to sear ch for the next channel, pausing for eight seconds before con- tinuing to the next. T o stop the sear ch, press the SCAN button a second time. INFO Button — Except REU Radio Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avai[...]

By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset channel. MUSIC TYPE Button — REU Radio Pr[...]

Y ou may add a second channel to each pushbutton by repeating the above pr ocedure with this exception: Press the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2. This allows a total of 12 Satellite channels to be stored into pushbutton memory . The channels stored in SET 2 memory can be selec[...]

Operation with RES / REQ AM/FM Stereo Radio with CD Player Right-Hand Switch Functions • Press the top of the switch to incr ease the volume. • Press the bottom of the switch to decr ease the volume. • Press the button in the center of the switch to select AM, FM, Satellite (SA T) - if equipped, or CD (DISC) mode. Left-Hand Switch Functions f[...]

beginning of the previous track if it is within one second after the current track begins to play . • Press the switch up or down twice to listen to the second track on the CD, three times to listen to the third track, and so forth. • Press the button located in the center of the contr ol to change CDs on the 6-Disc in-dash CD changer radio. Th[...]

• Press the switch up or down twice to listen to the second track on the CD, three times to listen to the third track, and so forth. • Press the button located in the center of the contr ol to change CDs on the 6-Disc in-dash CD changer radio. This button does not function for other radios. VIDEO ENTERT AINMENT SYSTEM (VES) T —I F EQUIPPED Th[...]

• The LCD screen swings up fr om the rear of the armrest to allow the rear seat passenger(s) to view the display . NOTE: Close the armrest after the LCD scr een has been raised to its viewing position. • The touch screen radio and DVD player contr ols allow front seat operation for easy setup in the case of younger rear seat passengers. • A b[...]

• T wo wir eless infrared headsets allow r ear seat passen- gers to listen to the same or individual audio sources. Audio/V ideo RCA Jacks (AUX Jacks) on the rear of the center console enable the monitor to display video directly from a video camera, connect video games for display on the screen, or play music directly fr om an MP3 player . 1. V [...]

3. Do not apply paper , paper CD labels, or tape to the disc; avoid scratching a disc. 4. Do not use solvents such as benzine, thinner , cleaners, or antistatic sprays. 5. Store a disc in its case after playing. 6. Do not expose a disc to direct sunlight. 7. Do not store a disc wher e temperatures may become too high. 8. Do not play discs that are [...]

Blower Control Use this control to r egulate the amount of air forced thr ough the ven- tilation system in any mode. The blower speed increases as you move the control to the right fr om the “O” (Off) position. Ther e are four blower speeds. T emperature Control Use this control to r egulate the tem- perature of the air inside the passenger com[...]

• Panel Air is directed thr ough the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that they are dir ected toward the rear seat passengers for maximum airflow to the rear . • Bi-Level Air is directed thr ough the panel and floor out- lets. NOTE: For[...]

NOTE: The air conditioning compressor operates in Mix and Defrost, or a blend of these modes, even if the Air Conditioning Snowflake button is not pressed. This de- humidifies the air to help dry the windshield. T o impr ove fuel economy , use these modes only when necessary . • Recirculation Contr ol Use this button to block the flow of outside [...]

• MAX A/C For maximum cooling use the A/C and recir culation buttons at the same time. • Economy Mode If economy mode is desired, pr ess the A/C button to turn off the indicator light and the A/C compressor . Then, move the temperature contr ol to the desired temperature. Automatic T emperature Control (A TC) — If Equipped Automatic Operation[...]

cabin infrared sensor mounted between the sun-visors and from various sensors located thr oughout the vehicle. The controls on the climate contr ol provide the system with operator input. Other sensors take account of ve- hicle speed, A/C pressure, outside temperatur e, and engine cooling temperature. Using all of these inputs, the system automatic[...]

NOTE: • The temperature setting can be adjusted at anytime without affecting automatic operation. • Pressing the Air Conditioning Contr ol button while in AUTO mode will cause the LED in the contr ol button to flash three times and then turn of f. This indicates that the system is in AUTO mode and requesting the air conditioning is not necessar[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL 249 4[...]

The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Panel Air is directed thr ough the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that[...]

• Defrost Air is directed thr ough the windshield and side window demist outlets. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting. • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only . When the air conditioning is turned on, cool dehum[...]

• Extended use of recir culation may cause the windows to fog. If the interior of the windows begins to fog, press the RECIRCULA TION button to r eturn to out- side air . Some temp/humidity conditions will cause captured interior air to condense on windows and hamper visibility . For this reason, the system will not allow Recirculation to be sele[...]

W inter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. V acation Storage Anytime you store your vehicle, or keep it out of service (i.e., vacation) for two weeks or more, r un the air conditioning system at idle for about five minutes in the fresh air and high blower settings[...]

Outside Air Intake Make sure the air intake, located dir ectly in front of the windshield, is free of obstr uctions such as leaves. Leaves collected in the air intake may reduce airflow , and if they enter the plenum, they could plug the water drains. In winter months, make sure the air intake is clear of ice, slush, and snow . A/C Air Filter — I[...]

Control Setting Suggestions for V arious W eather Conditions UNDERST ANDING YOUR INSTRUMENT P ANEL 255 4[...]

REAR WINDOW FEA TURES Electric Rear Window Defroster — If Equipped The electric Rear W indow Defroster Contr ol is located on the climate control. Pr ess this button to turn on the rear window defr oster and the heated side mirrors (if equipped). An LED in the button will illumi- nate when the rear window defr oster is ON. The de- froster automat[...]

ST ARTING AND OPERA TING CONTENTS m Starting Procedur es ..................... 2 6 1 ▫ Automatic T ransaxle ................... 2 6 1 ▫ Normal Starting ...................... 2 6 2 ▫ T ip Start — Automatic T ransaxle Only ...... 2 6 2 ▫ Extremely Cold W eather (Below 2 20°F Or 2 29°C) ................ 2 6 3 ▫ If Engine Fails T o Start[...]

m All Wheel Drive — If Equipped ............ 2 7 5 m Parking Brake ......................... 2 7 6 m Brake System .......................... 2 7 8 ▫ Anit-Lock Brake System (ABS) ............ 2 7 9 m Electronic Brake Contr ol Systems – ABS/TCS/BAS/ESP ..................... 2 8 1 ▫ Anti-Lock Brake System (ABS) ............ 2 8 1 ▫ T raction[...]

▫ T r ead W ear Indicators .................. 3 0 6 ▫ Life Of T ire ......................... 3 0 6 ▫ Replacement T ires ..................... 3 0 7 ▫ Alignment And Balance ................. 3 0 8 m T ire Chains ........................... 3 0 9 m Snow T ires ........................... 3 0 9 m T ire Rotation Recommendations ............ 3 [...]

▫ Selection Of Engine Oil For Flexible Fuel V ehicles (E-85) And Gasoline V ehicles ....... 3 2 6 ▫ Starting ............................ 3 2 7 ▫ Cruising Range ....................... 3 2 7 ▫ Replacement Parts ..................... 3 2 7 ▫ Maintenance ......................... 3 2 7 m Adding Fuel .......................... 3 2 8 ▫ Fuel[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belt. Make sure all occupants have secur ely fastened their seat belts. W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others [...]

Normal Starting Normal Starting of either a cold or a warm engine does not requir e pumping or depressing the accelerator pedal. Simply turn the ignition switch to the ST AR T position and release when the engine starts. If the engine fails to start within 15 seconds, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat[...]

Extremely Cold Weather (Below 2 20°F or 2 29°C) T o ensur e reliable starting at these temperatur es, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is r ecommended. If Engine Fails T o Start If the engine fails to start after you have followed the NORMAL ST AR TING procedure, it may be flooded[...]

CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. Remote Starting System — If Equipped Remote start conveniently starts the engine from outside the vehicle by using th[...]

T o exit the Remote Start mode, allow the en- gine to run the cycle or depr ess the unlock button to disarm the V ehicle Theft Security Alarm and within one minute insert the key into the ignition and turn the ignition to the RUN position. The ignition must be in the RUN position in order to drive the vehicle. NOTE: The engine can be started two co[...]

The following conditions must be met before the engine will remote start: • Automatic T ransaxle in P ARK • All doors are closed • Hood is closed • Hazard Switch is of f • Brake Switch is inactive • Key is not in the ignition • Battery is at an acceptable charge level • P ANIC button on key fob is not depr essed ENGINE BLOCK HEA TER[...]

AUTOMA TIC TRANSAXLE CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or NEUTRAL [...]

W ARNING! It is dangerous to shift the gear selector lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idli[...]

Brake/T ransaxle Interlock System This system prevents you fr om moving the gear selector lever out of P ARK and into any gear unless the brake pedal is pressed. This system is active only while the ignition switch is in the ON position. Always press the brake pedal first, before moving the gear selector out of P ARK. NOTE: If a malfunction occurs,[...]

feature is inoperable. The engine can be started and stopped, but the key cannot be removed until you obtain service. 4 Speed / 6 Speed Automatic T ransaxle / AutoStick T — If Equipped The electronically contr olled transaxle provides a precise shift schedule. The transaxle electronics ar e self- calibrating; therefor e, the first few shifts on a[...]

CAUTION! DO NOT race the engine when shifting from P ARK or NEUTRAL positions into another gear range as this can damage the drivetrain. REVERSE Use this range for moving the vehicle rearwar d. Shift into this range only after the vehicle has come to a complete stop. NEUTRAL Engine may be started in this range. W ARNING! Do not coast in NEUTRAL and[...]

conditions, using the “5” range will improve perfor - mance and extend transaxle life by reducing excessive shifting and heat build-up. OVERDRIVE— 4 Speed T ransaxle This range should be used for most city and highway driving, it provides the smoothest upshifts, downshifts, and best fuel economy . However , select the “3” DRIVE range when[...]

CAUTION! If the transaxle operating temperature exceeds ac- ceptable limits, the vehicle computer will override OVERDRIVE and “3” DRIVE range by changing shift points. This is done to prevent transaxle damage due to overheating. Reset Mode - Electronic T ransaxle The transaxle is monitored electr onically for abnormal conditions. If a condition[...]

AUTOSTICK T — IF EQUIPPED AutoStick t is a driver-interactive transaxle that of fers six manual ratio changes to provide you with mor e control. AutoStick t allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and im- prove overall vehicle performance. This system can also provide you with mor e control during pas[...]

• The transaxle will automatically shift up when maxi- mum engine speed is reached while Autostick t is engaged. • T ransaxle shifting will be mor e noticeable when Autostick t is engaged. • If a downshift would cause the engine to over-speed, that shift will not occur until it is safe for the engine. The transaxle will stay in the manually s[...]

CAUTION! All wheels must have the same size and type tires. Unequal tire sizes must not be used. Unequal tire size may cause failure of the power transfer unit. P ARKING BRAKE When the parking brake is applied with the ignition on, the Brake Light in the instrument cluster will come on. NOTE: • This light, when illuminated with parking brake ap- [...]

NOTE: • When parking on a hill, it is important to set the parking brake before placing the gear selector in park, otherwise the load on the automatic transaxle locking mechanism may make it difficult to move the selector out of park. As an added precaution, turn the fr ont wheels toward the curb on a downhill grade and away from the curb on an u[...]

BRAKE SYSTEM Y our vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any reason (i.e., r epeated brake applications with the engine off) the brakes will still function. However , the effort r equired to brake the vehicle will be much greater than that requir ed with the power system operatin[...]

Anit-Lock Brake System (ABS) The Anti-Lock Brake System provides incr eased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to pr event wheel lock-up. W ARNING! Pumping of the Anti-Lock Brakes will diminish their effectiveness and may lead to an [...]

The ABS light monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed. However , th[...]

• the clicking sound of solenoid valves, • brake pedal pulsations, • and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. W ARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or h[...]

help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System” in this Section of the manual for more information about ABS. TRACTION CONTROL SYSTEM (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slip- ping wheel(s) and en[...]

W ARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too [...]

ESP/TCS Indicator Light The “ESP/TCS Indicator Light, located in the instrument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS Indicator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as lit[...]

ESP Operating Modes All ESP equipped vehicles can choose the following ESP operating modes: ESP ON This is the normal operating mode for ESP . Whenever the vehicle is started the ESP system will be in this mode. This mode should be used for almost all driving situa- tions. ESP should only be turned to Partial Of f for specific reasons as noted belo[...]

overcome, turn ESP on again by momentarily depressing the “ESP Contr ol Switch.” This may be done while the vehicle is in motion. ESP/BAS W arning Light and ESP/TCS Indicator Light The malfunction indicator for the ESP is com- bined with the BAS indicator . The yellow ESP/ BAS W arning Light and the yellow ESP/TCS Indicator Light in the instrum[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

DRIVING ON SLIPPER Y SURF ACES ACCELERA TION Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the front wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a dif ference in the surface traction under the front (driving) wheels. W ARNING! Rapid acceleration on slippery surfaces is da[...]

DRIVING THROUGH W A TER Driving through water mor e than a few inches/ centimeters deep will requir e extra caution to ensure safety and prevent damage to your vehicle. Flowing/Rising W ater W ARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path?[...]

CAUTION! • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not con- tinue to operate the vehicl[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standar d [...]

T ire Sizing Chart T ire Sizing Chart P Passenger Car tire size based on U.S. design standar ds ( ....blank.... ( Passenger Car tire based on Eur opean design standards LT Light T ruck tir e based on U.S. design standards T T emporary spar e tire 31 Overall diameter in inches (in) 215 Section width in millimeters (mm) 65 Aspect Ratio of section hei[...]

T ire Sizing Chart 95 Load Index (a numerical code associated with the maximum load a tire can carry) H A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating cond[...]

T ire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tir es as mounted on the vehicl[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weig[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the T ire and Loading Information placard and in the “V ehicle Loading”[...]

amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing[...]

298 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory o[...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Under inflation, also increases tire r olling resistance and results in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabilit[...]

check tire pr essure. Do not make a visual judgement when determining proper inflation. Radial tir es may look properly inflated even when they ar e under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which co[...]

T ire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tir e inflation pressure is very important. Increased tir e pressure and r educed vehicle loading may be requir ed for h[...]

Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tires. It is engineer ed to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be r epaired (or replaced) and r ein- stalled at the first opportunity . W ARNING! T emporary use spare tires are for emerg[...]

CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the compact spare installed. Damage to the vehicle may result. Limited Use Spare — If Equipped The limited use spare tir e is for temporary emergency use on your vehicle. This tire is identified by a limited use spare tir e warning label [...]

W ARNING! Prolonged use of limited use spare, or incorrect tire size of front wheel, may damage the transaxle differ - ential and result in loss of vehicle mobility and could result in loss of vehicle control. Tire Spinning When stuck in mud, sand, snow , or ice conditions, do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for lon[...]

T read Wear Indicators T r ead wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes approximately 1/16 in (2 mm). When the tr ead is worn to the tread wear indicato[...]

Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Pr otect tires from contact with oil, grease, and gasoline. Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressure. The manu- facturer str[...]

W ARNING! • Never use a tire with a smaller load index or capacity , other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. Y ou could lose control and have an accident. • Failure to equip your vehicle with tires having adequate speed capability can result in[...]

TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country r equire the use of snow tires during W inter . Standard tir es are of the all-season type and satisfy this requir ement as indicated by the M+S designation on the tire sid[...]

Follow the Maintenance Schedule in Section 8 for the recommended tir e rotation frequency . Remember , more frequent r otation is permissible if desired. Also, correct for anything causing rapid or unusual wear prior to performing the tire r otation. The suggested rotation method is the “forwar d-cross” shown in the following diagram. TIRE PRES[...]

pressur e will also increase as the vehicle is driven - this is normal and there should be no adjustment for this increased pr essure. • The TPM System will warn the driver of a low tire pressur e if the tire pressur e falls below the low- pressur e warning limit for any reason, including low temperature ef fects and natural pressure loss thr oug[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause [...]

• Seasonal temperature changes will af fect tire pressur e, and the TPMS will monitor the actual tire pr essure in the tire. BASE SYSTEM — IF EQUIPPED The T ire Pr essure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve [...]

repeat, pr oviding the system fault still exists. The T ire Pressur e Monitoring T elltale Light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some [...]

PREMIUM SYSTEM — IF EQUIPPED The T ire Pr essure Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pr essure readings to the Receiver Module. NOTE: It is particularly important for you to check the tire [...]

T ire Pressure Monitoring Low Pressure W arnings The T ire Pr essure Monitoring T elltale Light will illuminate in the instrument cluster and a chime will sound when tire pr essure is low in one or more of the four active r oad tires. In addition, the Electronic V ehicle Information Center (EVIC) will display a graphic showing the pressur e values [...]

turn off. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning When a system fault is detected, a chime will sound and the T ire Pr essure Monitoring T elltale Light will flash on and off for 75 seconds and then r emain on solid. In addition, the EVIC wi[...]

1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM[...]

5. Once you repair or r eplace the original road tir e, and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically . In addition, the TPM T elltale Light will turn OFF and the graphic in the EVIC will display a new pressur e value instead of dashes (- -), as long no tire pr essure is below the low-pressur e w[...]

3.5L ENGINE The 3.5L engine is designed to meet all emissions regulations and pr ovide satisfac- tory fuel economy and performance when using high-quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer r ecommends the use of 89 octane for optimum performance. The use of pre- mium gasoline is not recommended. Un- der norm[...]

Reformulated gasolines contain oxygenates, and are spe- cifically blended to reduce vehicle emissions and im- prove air quality . The manufacturer supports the use of r eformulated gaso- lines. Properly blended r eformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. GASOLINE/OXYGENA TE BLEND[...]

MMT IN GASOLINE MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles. The man[...]

• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may requir e immediate service. Contact your authorized dealer for service assistance. • The use of fuel additives, which[...]

• Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gases[...]

Along with the special E-85 fuel filler cap, your vehicle may display a badge, which also indicates it can operate on E-85. ETHANOL FUEL (E-85) E-85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials [...]

FUEL REQUIREMENTS Y our vehicle will operate on both unleaded gasoline with an octane rating of 87, or E-85 fuel, or any mixture of these two. For best results, a r efueling pattern that alternates be- tween E-85 and unleaded gasoline should be avoided. When you do switch fuels, it is recommended that: • you do not switch when the fuel gauge indi[...]

ST ARTING The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. CRUI[...]

ADDING FUEL FUEL FILLER CAP (GAS CAP) As a reminder , a fuel icon with an arr ow indicating which side of the vehicle the fuel filler door is located on, is located in the instrument cluster . The gas cap is behind the fuel filler door , on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the r eplacement cap i[...]

NOTE: If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system and could cause the • A poorly fitting [...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and doing so will cause the malfunction indicator light to turn on. • A fire may result if gasoline is pumped int[...]

VEHICLE LOADING V ehicle Loading Capacities Front Seat Occupants ....................... 2 Rear Seat Occupants ....................... 3 Luggage ................. 13.0 cu. ft. (0.368 cu. M) The load carrying capacity of your vehicle is shown on the “V ehicle Certification Label.” This information should be used for passenger and luggage loading[...]

The bar code allows a computer scanner to read the V ehicle Identification Number (VIN). Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Rating (GA WR) The GA WR is the maximu[...]

Figure out the weight on the fr ont and rear of the vehicle separately . It is important that you distribute the load evenly over the front and r ear axles. Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s GVWR. Loading T o load your ve[...]

TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , car efully review this information to tow your load as ef ficiently and safely as possible. T o maintain warranty coverage, follow the r equirements and recommendations in this [...]

Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and r ear axles evenly . Make sure that you do not exceed either front or rear GA WR. W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if eithe[...]

T railer Hitch Classifications The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. T railer Hitch Classification Definitions Class Max. T railer Hitch Industry Standards Class[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransaxle Max. Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. 1 2.4L/Auto See Note 2 1000 lbs (450 kg) 100 lbs (45 kg) 2.7L/Auto See Note 2 1500 lbs (680 kg) 150 [...]

T railer and T railer T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% of the Gr oss T railer W eight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of ve[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the T ire and Loading Information placard in the T ire Safety Information Section of this manual for th[...]

W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and that it will not shift during travel. When traile- ring cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to con[...]

4. T railer tongue weight rating for the trailer hitch utilized (This requir ement may limit the ability to always achieve 10% of trailer tongue weight as a percentage of total trailer weight). T owing Requirements — T ires • Do not attempt to tow a trailer while using a compact spare tir e. • Proper tir e inflation pressures ar e essential t[...]

• T railer brakes ar e recommended for trailers over 1,000 lbs (450 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (450 kg) loaded, it should have its own brakes with adequate braking capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal e[...]

NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle, but you must mate the harness to a trailer connector . T owing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away fr om heavy traffic. Make sure all trailer and v[...]

Automatic T ransaxle The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, thir d gear for a four-speed automatic and the fifth gear for a six-speed AutoStick t should be selected. NOTE: Using third or fifth instead of DRIVE while operating the vehicle under heavy operating conditions, will improv[...]

• Highway Driving Reduce speed. • Air Conditioning T urn of f temporarily . • Refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion. If you have any questions or concerns after reviewing this section, please consult your authorized dealer to for full details on the towing capabilities o[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flasher .................. 3 4 8 m If Y our Engine Overheats ................. 3 4 8 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped ......................... 3 5 0 m Jacking And T ire Changing ................ 3 5 0 ▫ Jack Location ........................ 3 5 1 ▫ Spare T ire[...]

HAZARD W ARNING FLASHER The flasher switch is located on the instrument panel, below the radio. Depress the switch and both cluster indicators and all front and r ear direc- tional signals will flash. Depress the switch again to turn Hazard W arning Flashers off. Do not use this emergency warning system when the vehicle is in motion. Use it when yo[...]

NOTE: There ar e steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. E[...]

Jack Location The jack and jack-handle are stowed under the load floor in the trunk. Spare Tire Stowage The compact spare tir e is stowed under the load floor in the trunk. Spare T ire Removal Lift up the load floor cover and remove the hold down. Spare T ire and Jack Stowage WHA T TO DO IN EMERGENCIES 351 6[...]

Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in P ARK (automatic transaxle) or REVERSE (manual transaxle). T urn OFF the ignition. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the[...]

W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic [...]

NOTE: The Jack Handle attaches to the side of the jack with two attachment points. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. Removing Jack Handle From Jack[...]

Jacking Locations WHA T TO DO IN EMERGENCIES 355 6[...]

3. There ar e two front jacking locations and two rear jacking locations on each side of the body as shown. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3. 4. T urn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack[...]

W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with any sharp edges. 7. Lower the vehicle by turning the jack screw to the left. 8. Finish tightening the nuts. Push down on the wrench while tightening the wheel nuts. Alternate nuts, until each nut has been tightened twice. Correct wheel nut torque [...]

1 1. Check the tire pr essure as soon as possible. Corr ect pressur e as required. JUMP-ST ARTING PROCEDURES DUE TO A LOW BA TTER Y Jump-starting remote battery terminals ar e located under the hood. The battery is stored between the left fr ont headlight assembly and the left front wheel splash shield. Access is through the splash shield. W ARNING[...]

1. W ear eye protection and r emove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact. 2. When boosting from a battery in another vehicle, park that vehicle within booster cable reach, but without allowing the vehicles to touch. Set parking brake, place automatic transaxle in P ARK and turn ignition[...]

5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine ground (-) of the vehicle with the discharged battery . Make sur e you have a good contact on the engine ground. Refer to the following illustration for jump-starting connections. 6. If the vehicle is equipped with Sentry Key t Immobi- lizer , t[...]

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between Reverse and First gear . Usually the least accelerator pedal pres- sure to maintain the r ocking motion withou[...]

CAUTION! Racing the engine or spinning the wheels too fast may lead to transaxle overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h). Do not spin the wheels continu- ously for more than 30 seconds. TOWING A DISABLED VEHICLE TOWING WITH THE IGNITION KEY Front Wheel Drive Y our vehicle may be towed (wi[...]

If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACC position. Make certain the transaxle remains in NEUTRAL. TOWING WITHOUT THE IGNITION KEY Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flat bed towing is the preferr ed towing m[...]

TOWING WITHOUT POWER — OVERRIDE TRANSAXLE INTERLOCK SYSTEM Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the r ear wheels are raised. Proper towing equipment is necessary to pr event dam- age to the vehicle. Battery power is requir ed to release the br[...]

MAINT AINING YOUR VEHICLE CONTENTS m 2.4L Engine Compartment ................ 3 6 8 m 2.7L Engine Compartment ................ 3 6 9 m 3.5L Engine Compartment ................ 3 7 0 m Onboard Diagnostic System — OBD II ........ 3 7 1 ▫ Loose Fuel Filler Cap Message ............ 3 7 1 m Emissions Inspection And Maintenance Programs .............[...]

▫ A/C Air Filter — If Equipped ............ 3 8 3 ▫ Power Steering ....................... 3 8 5 ▫ Front Suspension ..................... 3 8 5 ▫ Steering Linkage ...................... 3 8 6 ▫ Body Lubrication ..................... 3 8 6 ▫ W indshield W iper Blades ................ 3 8 6 ▫ W indshield W ashers ................... 3[...]

▫ Center High-Mounted Stop Light .......... 4 1 8 m Fluids And Capacities ................... 4 2 0 m Fluids, Lubricants, And Genuine Parts ........ 4 2 2 ▫ Engine ............................. 4 2 2 MAINT AINING YOUR VEHICLE 367 7[...]

2.4L ENGINE COMP ARTMENT 368 MAINT AINING YOUR VEHICLE[...]

2.7L ENGINE COMP ARTMENT MAINT AINING YOUR VEHICLE 369 7[...]

3.5L ENGINE COMP ARTMENT 3.5L Engine 370 MAINT AINING YOUR VEHICLE[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboar d Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems ar e oper- ating properly , your vehicle will provide excellent per - formance and fuel economy , as [...]

RESET button to turn off the message. If the pr oblem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a r ow , the system will turn on the MIL. Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some locali[...]

5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all a[...]

AUTHORIZED DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedur e yourself. NOTE: Inten[...]

The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect r eading. Checking the oil while the vehicle is on level ground and only when the engine is[...]

CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Sc[...]

Engine Oil V iscosity (SAE Grade) — 2.4L and 2.7L Engines SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . Y our engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. The engine oil filler cap also shows the recommen[...]

Materials Added to Engine Oils The manufacture str ongly recommends against the addi- tion of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered pr oduct and it’s performance may be impaired by supplemental ad- ditives. Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of use[...]

SP ARK PLUGS Spark plugs must fire pr operly to assure engine perfor- mance and emission control. New plugs should be in- stalled at the specified mileage. The entire set should be replaced if ther e is any malfunction due to a faulty spark plug. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the proper type of spark plug [...]

Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assur e proper catalyst operation and pr event possible catalyst damage. CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the [...]

T o minimize the possibility of catalyst damage: • Do not shut off the engine or interr upt the ignition when the transaxle is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any ignition coil connec- tors disconnected for prolonged periods. MAINTENANCE-FRE[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the W arranty Information b[...]

The A/C Air Filter is located in the fr esh air inlet behind the glove box. Perform the following procedur e to re- place the filter: 1. Open the glove box and remove all contents. 2. Push in on the sides of the glove box and pivot the glove box downward. 3. Disconnect the glove box door dampener from the slot on the side of the box. This is done b[...]

CAUTION! The A/C Air Filter is labeled with an arrow to indicate airflow direction through the filter . Failure to install the filter properly will result in the need to replace it more often. 7. Reinstall the glove box door dampener and glove box. POWER STEERING Checking the power steering fluid level at a defined service interval is not requir ed[...]

STEERING LINKAGE The tie rod end ball joints should be inspected for external leakage and damage when other maintenance is performed. BODY LUBRICA TION Locks and all body pivot points, including seat tracks, door hinges, trunk hinges, and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against r ust and[...]

Keep the blade rubber out of contact with petr oleum products such as engine oil, gasoline, etc. NOTE: Always refer to the wiper blade packaging for specific installation instructions. Many wiper blade r e- placements fit multiple vehicles. WINDSHIELD W ASHERS NOTE: Refer to the appropriate “Engine Compartment” diagram in Section 7 for the loca[...]

into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for an oil change or lubrication. Replace as requir ed. W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid [...]

Coolant Checks Check engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the fr ont of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty , clean[...]

CAUTION! • Mixing of coolants other than specified HOA T engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is introduced into the cooling system in an emergency , it should be replaced with the speci- fied coolant as soon as possible. • Do not use plain water alone or alcohol-base engine [...]

• Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant solution. The use of lower quality water will reduce the amount of corrosion pr otection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cordi[...]

Disposal of Used Engine Coolant Used ethylene glycol based engine coolant is a regulated substance requiring pr oper disposal. Check with your local authorities to determine the disposal rules for your community . T o prevent ingestion by animals or childr en, do not store ethylene glycol based engine coolant in open containers or allow it to remai[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check cool[...]

HOSES AND V ACUUM/V APOR HARNESSES Inspect surfaces of hoses and nylon tubing for evidence of heat and mechanical damage. Hard or soft spots, brittle rubber , cracking, tears, cuts, abrasions, and exces- sive swelling indicate deterioration of the rubber Pay particular attention to the hoses nearest to high heat sources such as the exhaust manifold[...]

W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou wouldn’t have your full braking capacity in an emergency . Brake And Power Steering Hoses When servici[...]

immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failur e. W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately . Master Cylinder - Brake Fluid Level Check Ch[...]

W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that has a lower initial boiling point than the recommended MOP AR t DOT 3 product or a brake fluid that is unidentified as to FMVSS specification may result in sudden brake failure d[...]

Fluid Level Check — V ehicles with 2.4L and 2.7L Engines Use the following procedur e to check the automatic transaxle fluid level properly: 1. Park the vehicle on level ground. 2. Run the engine at curb idle speed for a minimum of 60 seconds. 3. Apply the parking brake fully . 4. Place the gear selector momentarily in each gear position ending w[...]

CAUTION! • Using a transmission fluid other than the manu- facturer’s recommended fluid may cause deterio- ration in transmission shift quality and/or torque converter shudder . Using a transmission fluid other than that recommended by the manufacturer will result in more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and Ge[...]

FRONT AND REAR WHEEL BEARINGS Front and r ear wheel bearings are permanently sealed. No regular maintenance is r equired for these compo- nents. APPEARANCE CARE AND PROTECTION FROM CORROSION Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads pass[...]

W ashing • W ash your vehicle r egularly . Always wash your ve- hicle in the shade using Mopar t Car W ash or a mild car wash soap, and rinse the panels completely with clear water . • If insects, tar , or other similar deposits have accumu- lated on your vehicle, use Mopar t Super Kleen Bug and T ar Remover to r emove. • Use Mopar t Cleaner [...]

• If your vehicle is damaged due to an accident or similar cause which destroys the paint and pr otective coating, have your vehicle repair ed as soon as pos- sible. The cost of such repairs is consider ed the respon- sibility of the owner . • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such mater[...]

Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Interior Care Instrument Panel Cover The instrument panel cover has a low glar e surface, which minimizes reflections in the windshield. Do not use protectants or other pr oducts, which may cause undesirable reflections. Use soap and warm[...]

W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. YES Essentials t Fabric Cleaning Procedure – If Equipped YES Essentials t seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry[...]

Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe[...]

FUSES — TOT ALL Y INTEGRA TED POWER MODULE (TIPM) The TIPM is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini fuses. A label that identifies each component may be printed on the inside of the cover . Refer to the following chart for FUSES/TIPM location. Cavity Car- tridge Fuse Mini F[...]

Cavity Car- tridge Fuse Mini Fuse Description 2— 20 Amp Y ellow — 3— 10 Amp Red Battery Feed — Cen- ter High Mounted Stop Light (CHMSL)/ Brake Switch 4— 10 Amp Red Battery Feed — Igni- tion Switch 5— 20 Amp Y ellow T railer T ow — If Equipped 6— 10 Amp Red Ignition Off Draw (IOD) — Power Mir- ror Switch/Climate Controls 7— 30 [...]

Cavity Car- tridge Fuse Mini Fuse Description 14 — 10 Amp Red Ignition Off Draw (IOD) — Cabin Com- partment Node (CCN)/ Interior Lighting 15 40 Amp Green — Battery Feed — Ra- diator Fan Relay 16 — 15 Amp Lt. Blue IGN Run/ACC — Cigar Lighter/PWR Sunroof Mod 17 — 10 Amp Red Ignition Off Draw (IOD) — W ireless Control Module (WCM)/Cloc[...]

Cavity Car- tridge Fuse Mini Fuse Description 24 — 25 Amp Clear Battery Feed — PWR Sunroof Feed 25 — 10 Amp Red Ignition Run — Heated Mirrors - If Equipped 26 — 15 Amp Lt. Blue Auto Shutdown (ASD) Relay Feed 2 27 — 10 Amp Red Ignition Run — Occu- pant Classification Module (OCM)/ Occupant Restraint Controller (ORC) Cavity Car- tridge [...]

Cavity Car- tridge Fuse Mini Fuse Description 33 — 10 Amp Red Battery Feed — Switch Bank/ Diagnostic Link Connector/ Powertrain Control Module (PCM) 34 30 Amp Pink — Battery Feed — Anti- Lock Brakes (ABS) Module - if equipped/Electronic Stability Program (ESP) Module - If Equipped Cavity Car- tridge Fuse Mini Fuse Description 35 40 Amp Gree[...]

CAUTION! • When installing the T otally Integrated Power Module cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the T otally Integrated Power Module, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a[...]

NOTE: For lighted switches, see your authorized dealer for replacement instr uctions. LIGHTS BULBS — Outside Bulb No. Low Beam Headlight ..................... 9006 High Beam Headlight ..................... 9005 Front Park/T urn Signal/Side Marker Light . . . 3157AK Front Fog Light ..................... 9145//H10 Center High Mounted Stop Light (CH[...]

2. Reach into engine compartment and from behind the lamp assembly and grasp the connector . 3. Rotate bulb and connector 1 ⁄ 4 turn and pull outward from assembly . CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. Headlight Housing - Rear V iew T wisting Bulb From Socket MAINT AINING YOUR V[...]

4. Pull the bulb out of the socket and replace the bulb. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Reinsert the bulb and socket assembly and rotate clockwise 1 ⁄ 4 turn to secure. Removing Halogen Bulb From Assembly 414 MAINT AINING YOUR VEHICLE[...]

Fog Lights 1. Access to the lights through the lower fascia cutout is limited. 2. W e recommend you access the lights by turning the steering wheel to allow access and remove the inner fender shield. 3. Rotate bulb and connector 1 ⁄ 4 turn counterclockwise. 4. Pull bulb off of connector and r eplace with a new one. CAUTION! Do not touch the new b[...]

T aillights, Rear T urn Signals And Backup Lights — Replacement The turn signal, brake and taillights and backup lights are located in the r ear corner body panel housing. Changing the Rear Corner T aillight Bulbs 1. Open the trunk and gently pull back the trunk liner behind the taillight. Rear T ail Light Pull Back T runk Liner 416 MAINT AINING [...]

2. Remove the two plastic wing nuts from the taillight housing. 3. Grasp the taillight and pull firmly outward pushing gently on the studs from inside to disengage the light housing. 4. T wist and remove socket fr om light. 5. Remove bulb from socket and r eplace. Location Plastic W ing Nuts Changing T ail Light Bulb MAINT AINING YOUR VEHICLE 417 7[...]

License Plate Light — Rear 1. Remove two retaining scr ews holding the light lens in place. 2. Gently pry the light assembly loose. 3. Pull bulb from socket, r eplace and reattach the light assembly with the two retaining scr ews. Center High-Mounted Stop Light 1. Open the trunk lid to find the centrally located high- mounted stop light. Location[...]

2. T wist and remove socket fr om the back of the light housing. 3. Replace the bulb and reinstall the socket into the housing by locking it in place with a twist. Changing High Mount Stop Light Bulb MAINT AINING YOUR VEHICLE 419 7[...]

FLUIDS AND CAP ACITIES FLUIDS AND CAP ACITIES Engine U.S. Metric Fuel (approximate) All FWD Engines — (Except 2.4L PZEV) 16.9 Gals 64 L 3.5L Engine with A WD (All Wheel Drive) 17.3 Gals 65.5 L 2.4L PZEV (Partial Zero Emissions V ehicle) 18.4 Gals 69.7 L Engine Oil with Filter 2.4 Liter Engine (SAE 5W -20, API Certified) 4.5 Qts 4.26 L 2.7 Liter E[...]

FLUIDS AND CAP ACITIES Engine U.S. Metric Cooling System * 2.4 Liter Engine (Mopar t Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or equivalent. 7.7 Qts 7.3 L 2.7 Liter Engine (Mopar t Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or equivalent. 9.8 Qts 9.3 L 3.5 Liter Engine (Mopar t Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or eq[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) or equivalent Engine Oil (2.4L, 2.7L) Use API Certified engine oil. SAE 5W -20 is recommended. Refer to the engine oil fill cap for the corre[...]

Component Fluids, Lubricants, and Genuine Parts Spark Plugs (2.7L) RE14PMC5 (Gap.050 in [1.27 mm]) Spark Plugs (3.5L) ZFR5LP-13G (Gap.050 in [1.27 mm]) Fuel Selection (2.4L, 2.7L) 87 Octane Fuel Selection (2.7L - EX- CEPT CALIFORNIA EMIS- SION ST A TES) E-85 Ethanol Fuel Selection (3.5L) 87 to 89 Octane * PZEV = Partial Zero Emission V ehicle MAINT[...]

Chassis Component Fluids, Lubricants and Genuine Parts Automatic T ransaxle Mopar t A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar t DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not avail- able, then DOT 4 is acceptable. Use only recommended brake fluids. Power Steering Reservoir Mopar t A TF+4 Automatic T ransmiss[...]

MAINTENANCE SCHEDULES CONTENTS m Emissions Control System Maintenance ....... 4 2 6 m Maintenance Schedule ................... 4 2 6 ▫ Required Maintenance Intervals ........... 4 2 9 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Con- trol System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliabili[...]

oil if it has been six months since your last oil change even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 mi (10 000 km) or six months, whichever comes first. Y our[...]

NOTE: Six-speed AutoStick t T ransaxle, if equipped, is sealed therefor e, checking the fluid level can only be done by a certified dealership service center . • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perfor[...]

Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate the tires. 6,000 10 000 6 If using your vehicle in dusty or off-r oad conditions, inspect the engine air[...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the spark plugs on 2.4L engines (except PZEV* engine). 30,000 50 000 30 Inspect and adjust the power steering pump belt ten- sion on 2.4L engines. 30,000 50 000 30 Inspect the generator belt on 2[...]

Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Replace the timing belt on 2.4L and 3.5L engines. 102,000 170 000 102 Change the automatic transaxle fluid & filter . 120,000 200 000 120 Replace the accessory drive belt on 2.7L engines. 120,000 200[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 3 5 ▫ Prepar e For The Appointment ............ 4 3 5 ▫ Prepar e A List ........................ 4 3 5 ▫ Be Reasonable W ith Requests ............. 4 3 5 m If Y ou Need Assistance ................... 4 3 5 ▫ Chry[...]

m Department Of T ransportation Uniform T ire Quality Grades ........................ 4 4 1 ▫ T r eadwear .......................... 4 4 1 ▫ T raction Grades ...................... 4 4 1 ▫ T emperatur e Grades ................... 4 4 2 434 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

high quality service. The manufacturer’s authorized deal- ers have the facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this p[...]

In Mexico contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P . 05109 Mexico, D. F . In Mexico City: 5081-4568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing dif ficulties, the manufacturer has installed special TDD (T elecommuni- cation Devic[...]

Contract, and you requir e service after the manufactur- er’s New V ehicle Limited W arranty expires, please r efer to the contract documents, and contact the person listed in those documents. W e appr eciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, [...]

MOP AR T P ARTS Mopar t fluids, lubricants, parts, and accessories are available from your authorized dealer . They will help you keep your vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And W ashington, D.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should [...]

PUBLICA TION ORDER FORMS T o or der the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Expr ess, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street addr ess is required when or dering manuals (no P .O. Boxes). •[...]

Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raf fic Safety Administration. The specific grade rati[...]

W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) .............. 2 7 9 Adding Engine Coolant (Antifreeze) .......... 3 9 0 Adding Fuel ........................... 3 2 8 Adding W asher Fluid .................. 138,387 Additives, Fuel ......................... 3 2 2 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 379 Air Conditioner Maintenance ............... 3 8[...]

Automatic Door Locks ..................... 3 2 Automatic Oil Change Indicator ........ 173,184,426 Automatic T emperatur e Control (A TC) ......... 2 4 6 Automatic T ransaxle .............. 12,261,267,397 Adding Fluid ................... 397,398,424 Filter ............................... 3 9 9 Fluid and Filter Changes ................. 3 9 9 Fluid [...]

Bulbs, Light ............................ 4 1 1 Calibration, Compass ..................... 1 8 6 Capacities, Antifreeze (Engine Coolant) ......... 2 0 Capacities, Fluid ........................ 4 2 0 Caps, Filler Fuel ................................ 3 2 8 Oil (Engine) .................. 368,369,370,377 Radiator (Coolant Pressur e) ............... [...]

Compact Spare T ire ...................... 3 0 3 Compass .............................. 1 8 6 Compass Calibration ..................... 1 8 6 Compass V ariance ....................... 1 8 7 Computer , T rip/T ravel .................. 20,184 Connector U C I ................................ 2 2 7 Universal Consumer Interface (UCI) ......... 2 2 7 Con[...]

Digital V ideo Disc (DVD) Player .......... 220,223 Dimmer Switch, Headlight ................. 1 3 4 Dipsticks Automatic T ransaxle ................. 397,398 Oil (Engine) .......................... 3 7 4 Disabled V ehicle T owing ................... 3 6 2 Disposal Antifreeze (Engine Coolant) ............... 3 9 2 Engine Oil ........................[...]

Cooling ............................. 3 8 8 Exhaust Gas Caution .................... 3 2 3 Fuel Requirements .................. 319,420 Jump Starting ......................... 3 5 8 O i l ........................... 374,420,422 Oil Change Interval ............ 173,184,376,426 Oil Filler Cap ................. 368,369,370,377 Oil Filter .............[...]

Engine Oil ........................... 3 2 6 Fuel Requirements .................. 324,326 Maintenance ....................... 324,327 Replacement Parts ..................... 3 2 7 Starting ............................. 3 2 7 Flooded Engine Starting ................... 2 6 3 Floor Console .......................... 1 5 6 Fluid Capacities ...........[...]

Fuel System Caution ..................... 3 2 9 Fueling ............................... 3 2 8 Fuses ................................ 4 0 6 Garage Door Opener (HomeLink t ) ........... 1 4 3 Gas Cap (Fuel Filler Cap) ............ 328,330,371 Gasoline, Clean Air ...................... 3 2 0 Gasoline (Fuel) ......................... 3 1 9 Gasoline, Re[...]

Heated Seats ........................... 1 2 3 Heater ............................... 2 4 2 Heater , Engine Block ..................... 2 6 6 Hitches T railer T owing ........................ 3 3 6 HomeLink t (Garage Door Opener) T ransmitter . . . 143 Hood Prop ............................ 1 2 8 Hood Release .......................... 1 2 7 Hoses [...]

Keyless Entry System (Sedan) ................ 2 1 Keys ................................. 1 2 Knee Bolster .......................... 51,53 Lane Change and T urn Signals ........... 176,416 Lap/Shoulder Belts ....................... 4 2 LA TCH (Lower Anchors and T ether for CHildren) .. 7 3 Latches Hood ............................... 1 2 7 Lead Fre[...]

Security Alarm (Theft Alarm) .............. 1 8 Theft Alarm (Security Alarm) .............. 1 7 1 T ire Pr essure Monitoring (TPMS) ........... 3 1 0 T raction Contr ol ....................... 2 8 4 T urn Signal .................. 130,133,176,416 V oltage ............................. 1 7 1 W arning (Instrument Cluster Description) ..... 1 7 0 Load[...]

MP3 Player ......................... 220,223 MTBE/ETBE ........................... 3 2 1 Multi-Function Control Lever ............... 1 3 0 Navigation Radio ........................ 2 2 3 Navigation System ....................... 2 2 3 New V ehicle Break-In Period ................ 7 8 Occupant Restraints ..................... 59,62 Occupant Restrai[...]

Paint Care ............................. 4 0 0 Panic Alarm ............................ 2 5 Parking Brake .......................... 2 7 6 Passing Light ........................... 1 3 1 Personal Settings ........................ 1 8 8 Pets .................................. 7 7 Phone, Cellular .................... 89,223,224 Phone, Hands-Free (UCo[...]

Radio (Sound Systems) ................. 220,223 Rear Cup Holder ........................ 1 5 9 Rear Seat, Folding .................... 126,127 Rear Wheel Bearings ..................... 4 0 0 Rear W indow Defroster ................... 2 5 6 Rear W indow Features .................... 2 5 6 Rearview Mirrors ........................ 8 5 Recorder , Even[...]

Schedule, Maintenance .................... 4 2 6 Seat Belt Maintenance .................... 4 0 5 Seat Belt Reminder ..................... 48,49 Seat Belts Adjustable Shoulder Belt .................. 4 7 Adjustable Upper Shoulder Anchorage ........ 4 7 And Pregnant W omen ................... 5 0 Child Restraint ....................... 67,76 Extende[...]

Side W indow Demisters (Defrosters) .......... 2 5 3 Signals, T urn ........................... 4 1 6 Slippery Surfaces, Driving On ............... 2 8 8 Snow Chains (T ire Chains) ................. 3 0 9 Snow T ires ............................ 3 0 9 Sound Systems (Radio) ................. 220,223 Spare T ire ....................... 303,304,351 Sp[...]

Theft System (Security Alarm) ............... 1 8 T ilt Steering Column ..................... 1 3 9 T ime Delay , Headlight .................... 1 3 1 T ip Start .............................. 2 6 2 T ire and Loading Information Placar d ......... 2 9 5 T ire Identification Number (TIN) ............. 2 9 4 T ire Markings .......................... [...]

Recreational ....................... 345,363 W eight .............................. 3 3 7 T owing Assistance ....................... 1 0 2 T raction .............................. 2 8 8 T railer T owing .......................... 3 3 4 Cooling System T ips .................... 3 4 4 Hitches ............................. 3 3 6 Minimum Requirements .[...]

Understanding Y our Instrument Panel ......... 1 6 7 Uniform T ire Quality Grades ................ 4 4 1 Universal Consumer Interface (UCI) Connector . . . 227 Universal Serial Bus (USB) Port ........... 220,223 Universal T ransmitter ..................... 1 4 3 Unleaded Gasoline ....................... 3 1 9 Untwisting Procedur e, Seat Belt ......[...]

W indow Fogging ........................ 2 5 3 W indows .............................. 3 5 Power ............................... 3 5 W indshield Defroster ............... 244,250,251 W indshield W ashers ................... 134,138 Fluid ............................... 3 8 7 W indshield W iper Blades .................. 3 8 6 W indshield W ipers ...[...]

INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power[...]

A venger OWNER’ S MANUAL 2008 2008 A venger 81-226-0830 Third Edition P r inted in U .S.A.[...]