Dodge 2009 Caliber инструкция обслуживания

2009 C ALIBER C ALIBER Chrysler LL C 81-226-0939 Second Edition Printed in U.S.A. OWNER ’S MANU AL 2009[...]

VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution there- fore. DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. Y our driving ability can be seriously impaired with blood alcohol levels[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 7 5 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by a W arranty Information Booklet and various customer-oriented documents. Y ou are urged to r ead these publications carefully . Following the ins[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Caution[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ Ignition Key Removal .................. 1 2 ▫ Locking Doors W ith The Key ............. 1 5 ▫ Key-In-Ignition Reminder ............... 1 5 䡵 Sentry Key 威 .......................... 1 5 ▫ Replacement Keys ..................... 1 6 [...]

▫ Sound Horn W ith Remote Key Lock ........ 2 2 ▫ Flash Lights W ith Remote Key Lock/Unlock . . 23 ▫ Using The Panic Alarm ................. 2 4 ▫ Programming Additional RKE T ransmitters . . . 25 ▫ General Information ................... 2 5 ▫ RKE T ransmitter Battery Replacement ....... 2 5 䡵 Door Locks ........................... 2[...]

▫ Child Restraints ...................... 6 2 䡵 Engine Break-In Recommendations .......... 7 0 䡵 Safety T ips ........................... 7 1 ▫ T ransporting Passengers ................ 7 1 ▫ Exhaust Gas ......................... 7 2 ▫ Safety Checks Y ou Should Make Inside The V e h i c l e ............................. 7 3 ▫ Periodic[...]

A WORD ABOUT YOUR KEYS The authorized dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys. Ask your authorized dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransmission — If Equipped 1. Place the shift lever in P ARK. 2.[...]

NOTE: If you try to remove the key befor e you place the shift lever in P ARK, the key may become trapped tem- porarily in the ignition switch cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended. Manual T ransmission 1. T urn the ignition switch to the ACC (Accessory) position. 2. Push the key and cylinder inward and r otate the key to the LOCK position. 3. Remove the key from the ignition[...]

Locking Doors With The Key Y ou can insert the key with either side up. T o lock the door , turn the key to the right. T o unlock the door , turn the key to the left. Refer to “Body Lubrication” under “Maintenance Procedur es” in Section 7. Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition and the ignition[...]

someone used an invalid key to try to start the engine. Either of these conditions will result in the engine being shut off after two seconds. If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electr onics. Should this occur , have the ve[...]

At the time of purchase, the original owner is pr ovided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is requir ed for authorized dealer replacement of keys. Du- plication of keys may be performed at an authorized dealer or by following the customer key programming procedur e. This procedure[...]

The new Sentry Key 威 is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- grammed during this procedure. Repeat this procedur e to program up to eight keys. If you do not have a programmed Sentry Key 威 , contact your authorized dealer for details. NOTE: If a programmed key is lost, see your authorized dealer to have all r[...]

T o Set The Security Alarm 1. Remove the key from the ignition switch and get out of the vehicle. 2. Lock the door using either the power door LOCK switch or the Remote Keyless Entry (RKE) transmitter and close all doors. 3. The V ehicle Security Light in the instrument cluster will flash rapidly for approximately 16 seconds. This shows that the V [...]

REMOTE KEYLESS ENTR Y — IF EQUIPPED This system allows you to lock or unlock the doors and liftgate or activate the Panic Alarm fr om distances up to approximately 66 ft (20 m) using a handheld Remote Keyless Entry (RKE) transmitter . The RKE transmitter does not need to be pointed at the vehicle to activate the system. NOTE: The line of transmis[...]

T o Unlock The Doors And Liftgate Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver ’s door , or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Firs[...]

NOTE: Pressing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the V ehicle Security Alarm. Opening a door with the V ehicle Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the V ehicle Security Alarm. Illuminated Approach — If Equipped This feature activates th[...]

• For vehicles not equipped with the EVIC, perform the following steps: 1. Press the LOCK button on a pr ogrammed RKE trans- mitter for at least 4 seconds, but no longer than 10 sec- onds. Then, press the P ANIC button while still holding the LOCK button. 2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle [...]

• For vehicles not equipped with the EVIC, perform the following steps: 1. Press and hold the UNLOCK button on a pr ogrammed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time. 3. T est the feature while outside[...]

Programming Additional RKE T ransmitters Refer to Sentry Key 威 “Customer Key Programming.” If you do not have a programmed RKE transmitter , contact your authorized dealer for details. General Information This device complies with Part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. Thi[...]

1. If the RKE transmitter is equipped with a screw , remove the scr ew . W ith the RKE transmitter buttons facing down, use a flat blade to pry the two halves of the RKE transmitter apart. Make sure not to damage the elastomer seal during removal. 2. Remove and replace the batteries. A void touching the new batteries with your fingers. Skin oils ma[...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. (Continued) W ARNING! (Continued) • When leaving the vehicle, always remove the key from the ignition lock and lock your vehicle. Do not leave unattended children in the vehicle or with ac[...]

NOTE: T o prevent fr om locking the key in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open. A chime will sound as a reminder to r emove the key . Automatic Door Locks — If Equipped The doors will lock automatically on vehicles with power door locks if all of the following cond[...]

Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “Personal Settings (Customer-Pr ogrammable Features)” under “Elec- tronic V ehicle Information Center (EVIC) — If Equipped” in Section 4. • Fo[...]

3. The transmission is in NEUTRAL or P ARK. 4. The driver’s door is opened. 5. The doors were not pr eviously unlocked. Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Per - sonal Settings (Customer-Pr ogrammable Featu[...]

Child-Protection Door Lock System (Rear Doors) — If Equipped Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Child-Protection Door L[...]

NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver ’s door trim panel control all the door windows. Ther e are single window Power W indow Switch Lo[...]

controls on each passenger door trim panel, which oper - ate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position. NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition sw[...]

Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors. T o disable the window controls on the other doors, pr ess the window LOCKOUT switch. T o enable the window con- trols, pr ess the window LOCKOUT switch a second time. LIFTGA TE NOTE: The key that is used to start your[...]

NOTE: • In the event of a power malfunction, or the RKE transmitter is inoperative, insert the key into the liftgate lock cylinder and turn it to the right (manual lock models only). Using the liftgate handle, pull the liftgate open with one fluid motion. • Although the liftgate has no inside release mechanism, the liftgate trim panel includes [...]

Gas props support the liftgate in the open position. However , because the gas pressure dr ops with tempera- ture, it may be necessary to assist the pr ops when opening the liftgate in cold weather . OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint systems. These include the front and rear seat belt[...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seats in your vehicle are equipped with lap/ shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or collisions. This feature allows the shoulder part [...]

W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • T wo people should never be belted into a singl[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bon[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well. In a collision it could even cut into you. Be sure the be[...]

Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best. NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feat[...]

Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder belt featur es a three point seat belt with a mini-latch and buckle, which allows the shoulder belt to detach from the lower anchor when the seat is folded. The mini-buckle and shoulder belt can then be stored out of the way in the right side trim panel fo[...]

2. Grasp the mini-latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. 4. When the belt is long enough to fit, insert the mini- latch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the regular latch plate up the webbing as far as necessary to allow th[...]

6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 7. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, pull on the lap belt. A snug belt reduces the risk of slidin[...]

9. T o release the belt, push the r ed button on the buckle. 10. T o disengage the mini-latch from the mini-buckle for storage, insert the regular latch plate into the black button on the top of the mini-buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to ret[...]

front airbags, the pr etensioners are single use items. After a collision that is severe enough to deploy the airbags and pretensioners, both must be r eplaced. Enhanced Seat Belt Use Reminder System (BeltAlert 姞 ) If the driver’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5[...]

NOTE: W atch for the Seat Belt Reminder Light to turn on while unbuckling and off while r e-buckling the seat belt. It may be necessary to retract the seat belt. 4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming. BeltAlert 威 can be reactivated by r epeati[...]

Driver And Front Passenger Supplemental Restraint System (SRS) — Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the center of the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove [...]

The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity . This vehicle may also be equipped with side curtain airbags to protect the driver and passengers sitting next to a window . If the vehicle is equipped with side curtain airbags, they are located[...]

W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing. • If your vehicle is equipped with sid[...]

moderate to severe side collisions. In certain types of collisions, both the front and side airbags may be trig- gered. But even in collisions wher e the airbags work, you need the seat belts to keep you in the right position for the airbags to protect you pr operly . Here ar e some simple steps you can take to minimize the risk of harm from a depl[...]

4. If your vehicle has side airbags, do not lean against the door; airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under ⴖ If Y ou Need Assistance ⴖ in Section 9 of thi[...]

• Supplemental Side Curtain Airbags Above Side W in- dows (If Equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Seat Belt Reminder Light • Knee Impact Bolsters • Driver Inflatable Knee Blocker • Front Acceleration Sensors • Driver and Front Passenger Seat Belt Pr etensioners How The Airbag System[...]

Airbag W arning Light either momentarily or continu- ously . A single chime will sound if the light comes on again after initial start up. W ARNING! Ignoring the AIRBAG W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle,[...]

The ORC module determines if a side collision is severe enough to r equire the side airbags to inflate. The side airbag control module will not detect r oll over , front or rear collisions. The ORC module monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST ART or ON position. These include all of [...]

W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent. A modified vehicle ma[...]

• As the airbags deflate you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or throat irritation, [...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured because the airbags are not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper passen[...]

moment of airbag deployment, or near-deployment, and up to a quarter second of high-speed deceleration data during and/or after air bag deployment or near- deployment. EDR data are ONL Y recor ded if an airbag deploys, or nearly deploys, and are otherwise unavail- able. NOTE: 1. A near-deployment event occurs when the airbag sensor detects severe v[...]

particular driver , vehicle, or crash, will be treated confi- dentially . Confidential data will not be disclosed by Chrysler LLC to any third party except when: 1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2. Used i[...]

Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it. Children 12 years and younger should ride pr operly buc[...]

Infants and Child Restraints There ar e different sizes and types of r estraints for children fr om newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to ensure you have the corr ect seat for your child. Use the restraint that is corr ect for your child: • Safety experts recommend [...]

are older than one year . These child seats are also held in the vehicle by the lap/shoulder belt or the LA TCH child restraint anchorage system. • The belt-positioning booster seat is for children weigh- ing more than 40 lbs (18 kg), but who ar e still too small to fit the vehicle’s seat belts properly . If the child cannot sit with knees bent[...]

Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it. • The restraint must be appr opriate for your child’s weight and height. Check the label on the restraint for weight and height limits. • Carefully follow the instr uctions that come with the restr[...]

around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secur e, try a differ ent seating position. • Buckle the child into the seat according to the child restraint manufactur er’s directions. • When your child restraint is not in use, secur e it in the vehicle with the seat belt or remove it f[...]

Y our vehicle is equipped with the child restraint anchor - age system called LA TCH. The LA TCH system provides for the installation of the child restraint without using the vehicle seat belt. All thr ee rear seating positions have lower anchorages that are capable of accommodating LA TCH-compatible child seats having flexible, webbing- mounted lo[...]

provide add-on tether strap kits for some of their older products. T ether anchorage kits are also available for most older vehicles. Because the lower anchorages are to be intr oduced to passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchor - ages will continue to have features for installa[...]

In general, you will first loosen the adjusters on the lower and tether straps so that you can more easily attach the hook or connector to the lower and tether anchorages. The tether strap should be routed under the center of the head restraint and attached to the tether anchor on the rear of the seat back. Then tighten all thr ee straps as you pus[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap. Children T oo Large For Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are[...]

While cruising, brief full-thr ottle acceleration within the limits of local traffic laws, contributes to a good br eak-in. W ide-open throttle acceleration in low gear can be detri- mental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving type lubricant. Oil changes should be consisten[...]

Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicle [...]

Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a colli[...]

Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 M i r r o r s .............................. 7 9 ▫ Inside Day/Night Mirror ................ 7 9 ▫ Automatic Dimming Inside Mirror — If Equipped ........................... 8 0 ▫ Outside Mirror — Driver’s Side ........... 8 0 ▫ Outside Mirror — Passenger’s Side ......... 8 0[...]

䡵 V oice Recognition System (VR) — If Equipped .......................... 1 1 2 ▫ V oice Recognition System (VR) Operation . . . 1 12 ▫ Commands ........................ 1 1 4 ▫ V o i c e T r a i n i n g ...................... 1 1 7 䡵 Seats .............................. 1 1 7 ▫ Front Seat Adjustment ................. 1 1 7 ▫ Manual[...]

▫ Daytime Running Lights (DRL) — If Equipped .......................... 1 3 1 䡵 W indshield W ipers And W ashers .......... 1 3 1 ▫ W indshield W iper Operation ............ 1 3 1 ▫ Intermittent W iper System .............. 1 3 2 ▫ W indshield W ashers .................. 1 3 2 ▫ Mist Feature ........................ 1 3 3 䡵 T ilt St[...]

▫ Opening The Sunroof ................. 1 4 5 ▫ Closing The Sunroof .................. 1 4 6 ▫ Pinch Protect Featur e ................. 1 4 6 ▫ Pinch Protect Override ................ 1 4 6 ▫ V enting Sunroof — Express ............. 1 4 7 ▫ Sunshade Operation .................. 1 4 7 ▫ W ind Buffeting ...................... 1 4 7 ?[...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirr or to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of vehicle). The mirr or should be adjusted while set [...]

Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror . Pow[...]

T o adjust a mirror , turn the control wand towar d the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirr or to move. When finished adjusting the mirror , turn the control to the center position to prevent accidentally moving a mirr or . W ARNING! V ehicles and other objects seen in the passenger si[...]

V anity Mirrors — If Equipped T o use the vanity mirror , rotate the sun visor down and swing the mirror cover upwar d. Sun Visor Sliding Feature The sun visors may be extended out to provide mor e coverage of the side glass. uconnect 姞 phone — IF EQUIPPED NOTE: The sales code RER and REU radios contain an integrated uconnect 威 phone. Refer[...]

NOTE: • The uconnect 威 phone requir es a cellular phone equipped with the Bluetooth 威⬙ Hands-Fr ee Profile, ⬙ V ersion 0.96 or higher . See the uconnect 威 website for supported phones. For uconnect 威 customer support, visit the following websites: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect ?[...]

Phone Button The rearview mirr or contains the microphone for the system (depending on the type of mirror and radio equipped), and either the radio or the mirror has the two contr ol buttons (PHONE Button and VOICE RECOGNITION button) that will enable you to access the system. V oice Recognition Button Actual button location may vary with the ra- d[...]

• For certain operations, compound commands can be used. For example, instead of saying ⬙ Setup ⬙ and then ⬙ Phone Pairing, ⬙ the following compound command can be said: ⬙ Setup Phone Pairing. ⬙ • For each feature explanation in this section, only the combined form of the voice command is given. Y ou can also break the commands into[...]

T o complete the pairing process, you will need to r efer- ence your cellular phone Owner’s Manual. The uconnect 威 website may also provide detailed instr uctions for pairing. The following are general phone to uconnect 威 phone pairing instructions: • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep[...]

Dial by Saying a Number • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Dial. ⬙ • The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ . • The uconnect 威 phone will confirm the phone number and then dial. The number will appea[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook New Entry . ⬙ • When prompted, say the name of the new entry . Use of long names helps the voice recognition and it is recommended. For example, say ⬙ Robert Smith ⬙ or ⬙ Robert ⬙ instead of ⬙ Bob. ⬙ • When prompted, enter the number designation (e.g., ?[...]

• Automatic download and update, if supported, begins as soon as the Bluetooth 威 wireless phone connection is made to the uconnect 威 phone, for example, after you start the vehicle. • A maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the uconnect 威 phone. • Depending on the maximum n[...]

NOTE: • The phone handset must support Bluetooth 威 OBEX transfers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if they are alr eady connected to any system via Bluetooth 威 , and you may see a message on the phone display that the Bluetooth 威 link is busy . In this case, the user must first disconne[...]

After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. ⬙ Phonebook Edit ⬙ can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have[...]

Delete/Erase “All” uconnect 威 Phonebook Entries • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Erase All. ⬙ • The uconnect 威 phone will ask you to verify that you wish to delete all the entries from the phonebook. • After confirmation, the phonebook entries will be del[...]

Phone Call Features The following features can be accessed thr ough the uconnect 威 phone if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way calling, this feature can be accessed through the uconnect 威 phone. Check with your cellular service provider for the featur es th[...]

refer to ⬙ T oggling Between Calls ⬙ in this section. T o combine two calls, refer to ⬙ Confer ence Call ⬙ in this section. Place/Retrieve a Call From Hold T o put a call on hold, press the PHONE button until you hear a single beep. This indicates that the call is on hold. T o bring the call back from hold, pr ess and hold the PHONE button [...]

hold may not become active automatically . This is cell phone-dependent. T o bring the call back from hold, pr ess and hold the PHONE button until you hear a single beep. Redial • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Redial. ⬙ • The uconnect 威 phone will call the last number tha[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete the language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every uconnect 威 phone[...]

• If supported, this number may be programmable on some systems. T o do this, press the PHONE button and say ‘Setup’, followed by ‘Emergency’. • The uconnect 威 phone does slightly lower your chances of successfully making a phone call as to that for the cell phone directly . W ARNING! Y our phone must be turned on and paired to the uc[...]

V oice Mail Calling T o learn how to access your voice mail, refer to ⬙ W orking with Automated Systems. ⬙ W orking with Automated Systems This method is used in instances where one generally has to press numbers on the cellular phone keypad while navigating through an automated telephone system. Y ou can use your uconnect 威 phone to access a[...]

• Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature. Barge In - Overriding Prompts The “V oice Recognition” button can be used when you wish to skip part of a prompt and issue your voice recognition command immediately . For example, if a prompt is asking ⬙ W ould y[...]

phone, the audio will be played through your vehicle’s audio system. The uconnect 威 phone will work the same as if you dial the number using voice recognition. NOTE: Certain brands of cellular phones do not send the dial ring to the uconnect 威 phone to play it on the vehicle audio system, so you will not hear it. Under this situation, after s[...]

If you would like to connect or disconnect the Bluetooth 威 connection between a uconnect 威 phone paired cellular phone and the uconnect 威 phone, follow the instructions described in your cellular phone User’s Manual. List Paired Cellular Phone Names • Press the PHONE button to begin. • After the “Ready” prompt and the following beep[...]

Delete uconnect 威 phone Paired Cellular Phones • Press the PHONE button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • At the next prompt, say ⬙ Delete ⬙ and follow the prompts. • Y ou can also press the VOICE RECOGNITION button at any time while the list is being played, and then[...]

This procedur e may be repeated with a new user . The system will adapt to the last trained voice only . T o restor e the V oice Recognition system to factory default settings, enter the V oice T raining session via the above procedur e and follow the prompts. V oice Recognition (VR) • For best performance, adjust the rearview mirr or to provide [...]

• It is not recommended to stor e similar sounding names in the uconnect 威 phonebook. • Phonebook (Downloaded and uconnect 威 phone Local) name recognition rate is optimized when the entries are not similar . • Y ou can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). ⬙ 800 ⬙ must be spoken ⬙ eight-zero-zer o. ⬙ • Even tho[...]

Bluetooth 威 Communication Link Cellular phones have been found to lose connection to the uconnect 威 phone. When this happens, the connection can generally be reestablished by switching the phone off/on. Y our cellular phone is recommended to r emain in Bluetooth 威 ON mode. Power-Up After switching the ignition key from OFF to either the ON or[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 107 3[...]

108 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 109 3[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

When you press the VR button, you will hear a beep. The beep is your signal to give a command. NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the VR button, listen for the beep, and say your command. Pressing the VR bu[...]

Commands The V oice Recognition system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the VR button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust the volum[...]

Radio FM T o switch to the FM band say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select the next station) • “Previous Station” (to select the pr evious station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” (t[...]

Memo T o switch to the voice recor der mode say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding you may press the VR button to stop recor d- ing. Y ou proceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (to continue r[...]

NOTE: Keep in mind that you have to press the VR button first and wait for the beep before speaking the “Barge In” commands. V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers, uconnect 威 phone V oice T raining feature may be used. 1. Press the VR button, say “System Setup” an[...]

Using body pressur e, move forward and rearwar d on the seat to be sure the seat adjusters have latched. W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehic[...]

Manual Lumbar — If Equipped The lumbar adjustment handle is located on the outboard side of the driver’s seat. T o increase or decr ease support, rotate the handle up or down. Driver’s Seatback Recline T o recline: 1. Lean forward befor e lifting the handle, then lean back to the desired position and r elease the handle. 2. Lift the handle to[...]

Adjustable Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Pull up or push down on the head restraints so that the upper edge is as high as practical. T o raise the head restraint, pull up on the head restraint. T o lower the head restraint, press the button and push down on the head r[...]

After turning the ignition ON, you can choose from High, Low , or Off heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for High, one for Low , and none for Off. Press the switch once to select High-level heat- ing. Press the switch a second time to select Low-level heating[...]

Fold-Flat Front Passenger Seat T o fold the front passenger seat, lift the r ecliner handle to the full upward position and push the seatback forwar d until it rests on the seat cushion. Fold-Flat Front Passenger Seat Handle Front Passenger Seat Folded Flat 122 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

Folding Rear Seat T o provide additional storage ar ea, each rear seatback can be folded forward. Pull the strap forwar d to move the seat forward and flat. Folding Rear Seat Rear Seat Folded Flat UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 123 3[...]

Reclining Rear Seat — If Equipped For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, appr oxi- mately 35 degrees maximum, and r elease the strap. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, peo[...]

2. Move the safety catch located under the front edge of the hood, near the center and raise the hood. Lift the hood prop r od, clipped to the left side (right side facing hood) of the engine compartment, to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. Hood Release Lever Safety Catch[...]

CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 8 in (20 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. W ARNING! If the hood is not fully latched it could fly up when the vehicle is mo[...]

T o change the brightness of the instrument panel lights, rotate the center portion of the multifunction lever up or down. Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF , a chime will sound to alert the driver when the driver’s door is opened. Headlight Control Dimmer Control UNDERST ANDING THE FEA[...]

Fog Lights — If Equipped The front fog light switch is on the multifunction lever . T o activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the multifunction lever . NOTE: The fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the fo[...]

If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the multifunction lever is moved, it would suggest that the fuse or indicator bulb is defective. High Beam/Low Beam Select Switch Push the multifunction lever away from you to switch the h[...]

Flash-to-Pass Y ou can signal another vehicle with your headlights by lightly pulling the multifunction lever toward you. This will cause the headlights to turn on at high beam and remain on until the multifunction lever is r eleased. NOTE: If the multifunction lever is held in the flash-to- pass position for more than 30 seconds, the high beams wi[...]

Daytime Running Lights (DRL) — If Equipped The high beam headlights will come on as Daytime Running Lights (DRL) at DRL intensity , which is a lower intensity then the normal high beams. The DRL’s will come on whenever the ignition is ON, the engine is running, the headlight switch is of f, the parking brake is off, the turn signal is of f, and[...]

Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable. Select the delay interval by turning the end of the lever . Rotate the knob upward (clockwise) to decrease the delay time and downwar d (counterclockwise) to incr ease the delay time. The delay [...]

Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray fr om a passing vehicle. As long as the lever is held down, the wipers will continue to operate. CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off [...]

TIL T STEERING COLUMN T o tilt the steering column, push down on the lever below the multifunction lever . W ith one hand firmly on the wheel, move the steering column up or down as desired. Push the lever back up to lock the column firmly in place. W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable s[...]

NOTE: The Electronic Speed Contr ol system has been designed to shut down if multiple speed control switch functions are operated simultaneously in or der to ensure proper operation. If this occurs, the system can be reactivated by pushing the Electr onic Speed Control switch ON/OFF button and resetting the desir ed vehicle set speed. T o Activate [...]

T o Set At A Desired Speed When the vehicle has reached the desir ed speed, press down on the Electronic Speed Contr ol lever and release. Release the accelerator and the vehicle will operate at the selected speed. NOTE: The vehicle should be traveling at a steady speed and on level ground befor e pressing the SET lever . T o Deactivate A soft tap [...]

T apping the SET DECEL button once will result in a 1 mph (1.6 km/h) speed decrease. Each time the button is tapped, speed decreases. Manual T ransaxle Pressing the clutch pedal will disengage the speed con- trol. A slight increase in engine RPM befor e the Electronic Speed Control disengages is normal. V ehicles equipped with manual transaxles may[...]

On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electr onic Speed Control. GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to thr ee remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLink[...]

W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this trans- ceiver with a garage door opener that has a “stop and reverse” feature as required by Federal safety standards. This includes [...]

Place the hand-held transmitter 1–3 in (3-8 cm) away from the HomeLink 威 button you wish to pr ogram while keeping the indicator light in view . 3. Simultaneously press and hold both the chosen HomeLink 威 button and the hand-held transmitter button until the HomeLink 威 indicator changes from a slow to a rapidly blinking light, then release [...]

This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 6. Firmly press and release the “Learn” or “T raining” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the [...]

Gate Operator/Canadian Programming Canadian radio-frequency laws r equire transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the sa[...]

Reprogramming A Single HomeLink 姞 Button T o re-pr ogram a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desir ed HomeLink 威 button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. W ithout releasing the button, pr[...]

General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation NOTE: The transmitter has bee[...]

W ARNING! • Never leave children in a vehicle, with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wit[...]

Closing the Sunroof Manual Mode T o close the sunroof, pr ess and hold the switch in the forward position. Again, any release of the switch will stop the movement and the sunroof will r emain in a partial close condition until the switch is pushed and held forward again. T o ensure sunroof is fully closed, press and hold switch until sunr oof has c[...]

V enting Sunroof — Express Press and hold the “V ent” button, and the sunroof will open to the vent position. This is called “Express V ent”, and will occur regar dless of the sunroof position. During Express V ent operation, any movement of the switch will stop the sunroof. Sunshade Operation The sunshade can be opened manually . However[...]

ELECTRICAL POWER OUTLETS There is a standar d 12-V olt power outlet located in the instrument panel for added convenience. This outlet can power cell phones, electronics and other low power devices. Power Outlet 12-V olts 148 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

W ARNING! T o avoid serious injury or death: • Do not use a three-prong adapter . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can[...]

POWER INVERTER — IF EQUIPPED A 1 15-V olt (150-W att) AC power inverter is located on the rear of the center console for added convenience. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 W atts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as[...]

W ARNING! T o avoid serious injury or death: • Do not use a three-prong adaptor . • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from[...]

CUPHOLDERS Y our vehicle is equipped with four cupholders. There ar e two cupholders located in the front. There ar e two cupholders behind the center console for rear passengers. CONSOLE FEA TURES The floor console’s sliding armrest moves forwar d 3 in (76.2 mm) to accommodate shorter drivers. The armrest lid also includes a unique flip pocket f[...]

W ARNING! Do not operate this vehicle with the console compart- ment lid in the open position. Cell phones, music players, and other handheld electronic devices should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury . NOTE: The flip pocket and console lid features [...]

CARGO AREA FEA TURES Cargo Light/Removable Self-Recharging Flashlight — If Equipped The dual-function light is mounted in the headliner above the cargo ar ea to illuminate the cargo area, and part of it snaps out of the bezel to serve as a flashlight when needed. The flashlight features two bright LED light bulbs and is powered by r echargeable l[...]

T o operate the flashlight, press the switch once for high, twice for low , and a third time to r eturn to off. Cargo Cover — If Equipped The cargo ar ea trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining r ear seat. T o install the Cargo Cover , insert either end of the cover into one of th[...]

Using the handle, pull the cover toward you and guide the rear cover posts into the guides located on both sides of the rear trim panel. W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the pa[...]

Cargo Tie-Down Loops There ar e two D-rings installed in the cargo area for securing cargo. W ARNING! • Cargo tie-down loops are not safe anchors for a child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat [...]

W ARNING! (Continued) • Place as much cargo as possible in front of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway . • Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or be- come a dangerous projectile in a sudden s[...]

activate the wiper . The rear wiper operates in an inter- mittent mode only . Rotating the center of the switch all the way forward will turn on the wash function. The wash pump will continue to operate as long as the button is pressed. Upon r elease, the wipers will cycle two times before r eturning to the set position. If the rear wiper is operat[...]

approximately 10 minutes. For an additional five minutes of operation, press the switch a second time. T o prevent excessive battery drain, use the defroster only when the engine is operating. CAUTION! Use care when washing the inside of the rear window to prevent damage to heating elements. Use a soft cloth and a mild washing solution, wiping para[...]

NOTE: The use of the Cooled Beverage Storage Bin is for nonperishable beverages only . T o operate the beverage cooler , pull the slide control about 0.5 in (12 mm) toward the passenger compartment. This will allow cool air to enter the beverage cooler . T o shut off the beverage cooler when not in use, push the slide control back 0.5 in (12 mm). T[...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 6 6 䡵 Instrument Cluster – Base ............... 1 6 7 䡵 Instrument Cluster – Pr emium ............ 1 6 8 䡵 Instrument Cluster Descriptions ........... 1 6 9 䡵 Electronic V ehicle Information Center (EVIC) — If Equipped .....................[...]

▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 198 ▫ Notes On Playing MP3/WMA Files ....... 2 0 0 ▫ List Button (Disc Mode For M P 3 / W M A P l a y ) .................... 2 0 3 ▫ Info Button (Disc Mode For MP3/WMA P l a y ) ............................. 2 0 3 䡵 AM/FM/CD/DVD Radio (RER/REN) – If [...]

▫ Info Button (CD Mode For MP3 Play) ...... 2 2 8 䡵 uconnect 威 studios (Satellite Radio) — If Equipped (REN/REQ/RER/RES/REU Radios O n l y ) ............................... 2 2 9 ▫ System Activation .................... 2 2 9 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) ......... 2 3 0 ▫ Selecting uconnect 威 stu[...]

INSTRUMENT P ANEL FEA TURES 1 - Air Outlet 5 - Upper Glove Compartment 9 - Heated Seat Switches – If Equipped 2 - Demisters 6 - Lower Glove Compartment/Beverage Cooler – If Equipped 10 - Hazard W arning Flasher 3 - Instrument Cluster 7 - Storage Bins 1 1 - ESP OFF Switch – If Equipped 4 - Radio 8 - Climate Controls 166 UNDERST ANDING YOUR INS[...]

INSTRUMENT CLUSTER – BASE UNDERST ANDING YOUR INSTRUMENT P ANEL 167 4[...]

INSTRUMENT CLUSTER – PREMIUM 168 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Reminder This indicates that the fuel filler door is located on the left side of the vehicle. 3. T emperature Gauge The temperature gauge shows engine coolant tempera- ture. A[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer- ship for service if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cool- ing System Pressure Cap paragra[...]

8. Airbag W arning Light This light turns on and remains on for seven seconds as a bulb check, when the ignition switch is first turned ON. If the light is not on during starting, stays on, or turns on while driving, have the system inspected by an authorized dealer as soon as possible. 9. V ehicle Security Light — If Equipped This light will fla[...]

12. Engine T emperature W arning Light This light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches H , this indicator will illuminate and a single chime will sound after reaching a set thr eshold. Further overheating will cause the temperatur e gauge to pass H , the indicator will continuously flash and a c[...]

Accordingly , when the low tire pr essure telltale illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pr essure. Driving on a significantly under-inflated tir e causes the tire to overheat and can lead to tir e failure. Under-inflation also reduces fuel ef ficiency and tire tread life, and may af[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]

means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the T rip Odometer button on the instrument cluster . T o reset the oil change indi[...]

17. Cruise Indicator — If Equipped This indicator shows that the Speed Control system is ON. 18. T rip/Odometer Display Reset Button Press this button to change the display fr om odometer to either of the two trip odometer settings. T rip A or T rip B will appear when in the trip odometer mode. Push in and hold the button for two seconds to reset[...]

21. T urn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. If the vehicle electronics sense that the vehicle has traveled about one mile with the turn signals on, a continuous chime will sound to alert you to turn the signals off. If either indicator flashes at a rapid rate, check for a de[...]

brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer . 25. High Beam Indicator This indicator shows that the headlights are on high beam. Push the multifunction lever forward to switch the headlights to high beam, and pull toward yourself (normal position) [...]

NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- tions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate r epair is neces- sary . W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system [...]

28. Electronic V ehicle Information Center Display — If Equipped When the appropriate conditions exist, this display shows the Electronic V ehicle Information Center (EVIC) messages. Refer to the Electronic V ehicle Information Center (EVIC) in this section for more information. 29. T ransmission T emperature Indicator — If Equipped During sust[...]

The EVIC consists of the following: • System Status • V ehicle information warning message displays • Personal settings (customer programmable featur es) • Compass heading • Outside temperature display • T rip computer functions • uconnect 威 phone displays — If equipped • Audio mode display • T ire Pr essure Monitor (TPM) When[...]

• Gate Ajar (with a single chime) • Headlights On • Key In Ignition • Check TPM System • Oil Change Required Oil Change Required Y our vehicle is equipped with an engine oil change indicator system. The “Change Oil” message will flash in the instrument cluster odometer for appr oximately 5 sec- onds after a single chime has sounded to[...]

EVIC Functions Press the EVIC button until one of the following func- tions are displayed on the EVIC: • Compass/T emperature/Audio • A verage Fuel Economy • Distance T o Empty (DTE) • Elapsed T ime • T ire Pr essure Monitor (TPM) • Personal Settings T o Reset The Display Pressing and holding the EVIC button once will clear the function[...]

Compass/T emperature/Audio Press and r elease the EVIC button to display one of eight compass headings to indicate the direction the vehicle is facing, the outside temperature and the curr ent radio station. For additional information regar ding the compass, refer to “Personal Settings (Customer Programmable Fea- tures)” in this section. A vera[...]

Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the ON or ST ART position. Tire Pressure Monitor (TPM) Refer to “T ire Pr essure Monitoring System (TPMS)” under “Starting and Operating” in Section 5. Personal [...]

Auto Unlock On Exit When ON is selected all the vehicle’s doors will unlock when the driver’s door is opened if the vehicle is stopped (manual transmissions) or the vehicle is stopped and the transmission is in P ARK or NEUTRAL position (auto- matic transmissions). Press and hold the EVIC button when in this display until “ON” or “OFF” [...]

when exiting the vehicle. Press and hold the EVIC button when in this display until 0, 30, 60, or 90 appears to make your selection. Delay Power Off to Accessories Until Exit When this feature is selected, the power window switches, radio, uconnect 威 phone, power sunroof, and power outlets will remain active for up to 10 minutes after the ignitio[...]

NOTE: A good calibration requir es a level surface and an environment fr ee from large metallic objects such as buildings, bridges, undergr ound cables, railroad tracks, etc Compass V ariance Compass V ariance is the differ ence between Magnetic North and Geographic North. T o ensure compass accu- racy , the compass variance should be properly set [...]

press and r elease (less than one second) the EVIC button several times until “Compass V ariance” is highlighted. The “Compass V ariance” message and the current vari- ance zone number will be displayed. T o change the zone, press and hold (longer than two seconds) the EVIC button to increment the variance one step. Repeat as necessary , wi[...]

calibration mode. The CAL indicator will come on con- tinuously in the EVIC display to indicate that the com- pass is now in the calibration mode, and that the vehicle can now be driven to calibrate. 5. T o complete the compass calibration, drive the vehicle in one or more complete 360–degr ee circle under 5 mph (8 km/h) in an area fr ee from pow[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns conti[...]

Phone Button uconnect 威 phone — If Equipped Press this button to operate the uconnect 威 phone featur e (if equipped). Refer to “uconnect 威 phone” in Section 3. If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith uconnect” message will display on the radio screen. TIME Button P[...]

TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency . Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL contr ol knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCR[...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype [...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD. • VES™ Power - Allows you to turn VES™ ON and OFF (if equipped). • VES™ Lock - Locks out rear VES™ r emote controls (if equipped). • VES™ CH1/CH2 - Allows the user to change the [...]

down and selecting ⬙ other . ⬙ Enter the country code using the TUNE/SCROLL control knob to scr oll up and down to select the number and then push to select. Subtitle Language — If Equipped Selecting this item allows you to choose a default subtitle language (effective only if the language is supported by the disc). Y ou can select a language[...]

SET Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five seconds afte[...]

CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components. NOTE: The ignition switch must be in the ON or ACC position to operate th[...]

The disc can be ejected with the radio and ignition OFF . SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD. Press the left SEEK button to r eturn to the beginning of the current selection, or r eturn to the beginning of the previous selection if the CD is within the first second of the current selection. Pr essing [...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats[...]

frequencies in the following table ar e supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64[...]

• Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIS[...]

Pressing the AUX button will change the mode to auxil- iary device if the AUX jack is connected. NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode[...]

Operating Instructions - uconnect 威 studios (Satellite Radio) (If Equipped) Refer to “uconnect 威 studios (Satellite Radio)” in this section. Operating Instructions - V ideo Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” Dolby 威 Manufactured under license fr om Dolby 威 Labo[...]

Refer to your uconnect 威 tunes (REN) or (RER) user’s manual for detailed operating instructions. Operating Instructions — V oice Recognition System (VR) — If Equipped For the radio, refer to “V oice Recognition System (VR)” in Section 3. Operating Instructions — uconnect 姞 phone — If Equipped Refer to “uconnect 威 phone” in S[...]

6. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. The clock setting m[...]

Changing the T ime Zone 1. T urn on the radio. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 4. Select a time zone by touching the screen wher e your selection appea[...]

Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection, without stopping. T urning the ON/VOLUME control knob to the right incr ease[...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency . Setting the T one, Balan[...]

SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five s[...]

• This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable compact discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the[...]

EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on[...]

SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . N[...]

exceeding 20 folders will result in this display . W ith 200 files, exceeding 50 folders will result in this display .) • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙ and a three- character extension) Multisess[...]

MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. [...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers. Pressing the DISC/AUX button will change the mode to auxiliar[...]

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns conti[...]

If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith uconnect” message will display on the radio screen. TIME Button Press the TIME button to alternate locations of the time and frequency display . Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust t[...]

TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency . Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL contr ol knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCR[...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype [...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . B u t t o n s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations)[...]

CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (on[...]

R W/FF Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or RW or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activat[...]

• Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a number instead. W ith a maximum number of files, exceeding 20 folders will result in this display [...]

MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. [...]

LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL contr ol knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selectio[...]

TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF). Operating Instructions - uconnect 威 phone (If Equipped) Refer to “uconnect 威 phone” in Section 3. Operating Instructions - uconnect 威 studios (Satellite Radio) (If Equipped) Refer [...]

Electronic Serial Number/Sirius Identification Number (ESN/SID) Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Y our V ehicle Identification Number . T o access the ESN/SID, refer to the following steps: ESN/SID Access W ith REQ/RES Radios W ith the ignition s[...]

Satellite Antenna T o ensure optimum r eception, do not place items on the roof ar ound the rooftop antenna location or strap items to the trunk lid ar ound the trunk lid antenna (if equipped). Metal objects placed within the line of sight of the antenna will cause decreased performance. Lar ger lug- gage items such as bikes should be placed as far[...]

INFO Button — Except REU Radio Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able). Also, pressing and holding the INFO button for an additional three seconds will make the radio display the song title all of the time (press and hold again to r eturn to normal display). INFO But[...]

made, you can seek up or down or scan the channels and the radio will tune to the next station matching the selected format. There is no time-out for this scr een. Pressing the MUSIC TYPE button again will close the Music T ype screen. Once closed, seek up, seek down, and scan will no longer be based on your selection. SETUP Button Pressing the SET[...]

Operating Instructions — uconnect 姞 phone (If Equipped) Refer to “uconnect 威 phone” in Section 3. Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the[...]

The button located in the center of the right-hand control will switch modes to Radio or CD. The left-hand control is a r ocker type switch with a pushbutton in the center . The function of the left-hand control is dif ferent depending on which mode you are in. The following describes the left-hand control operation in each mode. Radio Operation Pr[...]

3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner , cleaners, or antistatic sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc wher e temperatures may become too high. NOTE: If you experience difficulty in p[...]

The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The controls ar e as follows: Mode Control (Air Direction) The mode control allows you to choose from several patterns of air distribution as identified by the symbols. Panel Air is directed thr ough the outlets [...]

NOTE: There is a dif ference in temperature between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This feature gives impr oved comfort during sunny but cool conditions. Floor Air is directed thr ough the floor outlets and side window demister outlets with a small amount through the defr ost outlet. Mix Air[...]

NOTE: For maximum airflow to the rear seat passen- gers, the center instrument panel outlets can be aimed, so that the left center outlet is directed towar d the right rear passenger and the right center outlet is directed towar d the left rear passenger . Fan Control Use this control to r egulate the amount of air forced thr ough the system in any[...]

Circulation Control Use this button to choose between outside air intake or recir culation of the air inside the vehicle. A light will illuminate when you are in recir culate mode. Only use the recir culate mode to temporarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start up in very hot or humid wea[...]

Air Conditioning (MAX A/C) For maximum cooling select the air direction to either the Panel or Bi-Level position using the mode control. Pr ess the A/C button and the recir culation button so that both lights are illuminated and set the temperature contr ol to its coolest setting. NOTE: • Recirculation Mode will not operate in Floor , Mix or Defr[...]

Operating Tips 242 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

W indow Fogging V ehicle side windows tend to fog on the inside in mild rainy or humid weather . T o clear the windows, set mode to the mix or defrost position. Dir ect the panel outlets toward the side windows. Do not use r ecirculate without A/C for long periods as fogging may occur . Interior fogging on the windshield can be quickly re- moved by[...]

Side W indow Demisters A side window demister outlet is at each end of the instrument panel. These nonadjustable outlets dir ect air toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows thr ough which you view the outside mirrors. 244 UNDERST ANDING YOUR INSTRUMENT P AN[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 4 9 ▫ Manual T ransmission — If Equipped ...... 2 4 9 ▫ Automatic T ransmission — If Equipped .... 2 4 9 ▫ Normal Starting ..................... 2 4 9 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ......................... 2 5 0 ▫ If Engine Fa[...]

䡵 AutoStick 威 — If Equipped ............... 2 5 7 ▫ Operation ......................... 2 5 8 ▫ General Information .................. 2 5 8 䡵 Driving On Slippery Surfaces ............. 2 5 9 ▫ Acceleration ........................ 2 5 9 ▫ T raction ........................... 2 5 9 䡵 Driving Through W ater ................. 2 6 0[...]

▫ T ire Inflation Pr essures ................ 2 8 4 ▫ T ire Pr essures For High Speed Operation . . . 285 ▫ Radial Ply T ires ..................... 2 8 6 ▫ Compact Spare T ire — If Equipped ....... 2 8 6 ▫ Limited-Use Spare — If Equipped ........ 2 8 7 ▫ T i r e S p i n n i n g ....................... 2 8 8 ▫ T read W ear Indicato[...]

▫ Loose Fuel Filler Cap Message ........... 3 0 7 䡵 V ehicle Loading ...................... 3 0 7 ▫ V ehicle Certification Label .............. 3 0 8 䡵 T r a i l e r T o w i n g ........................ 3 1 0 ▫ Common T owing Definitions ............ 3 1 0 ▫ Installing A T railer Hitch ............... 3 1 2 ▫ T railer Hitch Classifica[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Do not leave the key in [...]

and release when the engine starts. If the engine fails to start within 15 seconds, turn the ignition switch to the OFF position, wait 10 to 15 seconds, then repeat the normal starting procedur e. W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started this way . Unb[...]

W ARNING! Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury . CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After [...]

Fully depress the clutch pedal befor e you shift gears. As you release the clutch pedal, lightly depr ess the accelera- tor pedal. Use each gear in numerical order , do not skip a gear . Be sure the transaxle is in 1st gear , (not 3rd), when starting from a standing position. Damage to the clutch can r esult from starting in 3r d gear . For most ci[...]

Recommended Shift Speeds T o use your manual transaxle for optimal fuel economy , it should be upshifted as listed in the following table. Manual T ransaxle Recommended Shift Speeds Units in mph (km/h) Engine Size Accel- eration Rate 1t o2 2t o3 3t o4 4t o5 All En- gines Accel 14 (23) 23 (37) 29 (47) 45 (72) Cruise 12 (19) 18 (29) 25 (40) 32 (52) D[...]

CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or NEUTRAL into any forward gear[...]

NOTE: If a malfunction occurs, the transaxle will not shift out of P ARK. Battery power is requir ed to release the brake/transmission interlock system. There is a r emov- able plug in the right side of the shifter housing that allows you to insert your finger to override the system. If this occurs, obtain service as soon as possible. Automatic T r[...]

Never use P ARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply the parking brake first, and then place the shift lever into the P ARK position. W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle whi[...]

REVERSE Shift into this range only after the vehicle has come to a complete stop. NEUTRAL The engine may be started in this range. DRIVE This should be used for most driving and provides the best ratio for optimum drivability , fuel economy , and performance. AUTOSTICK 姞 — IF EQUIPPED Autostick 威 is a driver-interactive transmission that of f[...]

Operation NOTE: Autostick 威 is not functional until the CVT warms up in cold weather . Autostick 威 operation is activated in the DRIVE position by moving the shift lever side-to-side. Moving the shift lever to the (+) side will activate Autostick 威 and shift up to the next higher manual ratio, unless you are alr eady operating in or near Over[...]

• If the system detects powertrain overheating, the transmission will revert to the automatic shift mode and remain in that mode until the powertrain cools of f. • If the system detects a problem, it will disable the Autostick 威 mode and the transmission will return to the automatic mode until the problem is corr ected. DRIVING ON SLIPPER Y S[...]

2. Slow down if the road has standing water or puddles. 3. Replace the tires when tr ead wear indicators first become visible. 4. Keep the tires pr operly inflated. 5. Maintain enough distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. DRIVING THROUGH W A TER Driving through water mor e than a few in[...]

CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing wa- ter [...]

W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances. Therefore, after driving through standing water , drive slowly and[...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to t[...]

P ARKING BRAKE When the parking brake is applied with the ignition ON, the Brake Light in the instrument cluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle is moving, a chime will sound to alert the driver . The chime wil[...]

As an added precaution, turn the fr ont wheels toward the curb on a downhill grade and away from the curb on a uphill grade. Y ou should always apply the parking brake before leav- ing the vehicle. W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others [...]

If either of the two hydraulic systems lose normal capa- bility , the remaining system will still function with some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and gr eater pedal force r equired to slow or stop. In addition, if the malfunction is caused by an internal leak, as the brake [...]

W ARNING! (Continued) • The ABS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely , or hydro- planing. Only a safe, attentive, and skillful driver can prevent accidents. • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner w[...]

ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops. Y ou may also experience the following when the brake system goes into Anti-Lock mode: • the ABS motor running (it may continue to run for a short time after the[...]

enhance vehicle stability and control in various driving conditions and are commonly r eferred to as ESP . Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressur e to prevent wheel lockup and help avoid skidding on slippery surfaces during[...]

W ARNING! (Continued) • The capabilities of a BAS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user ’ s safety or the safety of others. T raction Control System (TCS) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is [...]

• Understeer - when the vehicle is turning less than appropriate for the steering wheel position. ESP Indicator Light The “ESP Indicator Light” located in the instr ument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active. If the “ESP Indicator Light” begins to flash during acceleration, ease up[...]

ESP Operating Modes The ESP system has two available operating modes. Full On This is the normal operating mode for ESP . Whenever the vehicle is started the ESP system will be in this “On” mode. This mode should be used for most driving situations. ESP should only be turned to “Partial Of f” for specific reasons as noted below . Partial Of[...]

ESP/BAS W arning Light and ESP Indicator Light The malfunction indicator for the ESP is combined with the BAS indicator . The yellow “ESP/BAS W arning Lamp” and the yellow “ESP Indicator Light” in the instrument cluster both come on when the ignition switch is turned to the ON position. They should both go out with the engine running. If th[...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standard h[...]

• L T (Light T ruck) - Metric tire sizing is based on U.S. design standards. The size designation for L T -Metric tires is the same as for P-Metric tir es except for the letters “L T” that are molded into the sidewall preced- ing the size designation. Example: L T235/85R16. • T emporary spare tir es are high-pressur e compact spares designe[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light truck tir e based on U.S. design standards T = T emporary spare tir e 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = As[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size des[...]

axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section. T o determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on the T ire and Loading Inform[...]

NOTE: • The following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle. • For the following [...]

282 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory o[...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as [...]

loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could[...]

vehicle only . Since this tire has limited tread life, the original tire should be r epaired (or replaced) and r ein- stalled at the first opportunity . W ARNING! • T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). • T emporary-use spare tires have limited tread life. When the tr[...]

W ARNING! The limited-use spare tires are for emergency use only . Installation of this limited-use spare tire affects vehicle handling. W ith this tire, do not drive more than 50 mph (80 km/h). Keep it inflated to the cold tire inflation pressure listed on either your tire plac- ard or limited-use spare tire and wheel assembly . Replace (or repair[...]

These indicators are molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tir e should be replaced. Many states have laws requiring tir e replacement at this point. Life of Tire The service life of a tire is dependent upon varyi[...]

Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Pr otect tires from contact with oil, grease, and gasoline. Replacement Tires The tires on your new vehicle pr ovide a balance of many characteristics. They should be inspected regularly for wear and correct cold tir e inflation pressure. The manu- facturer str[...]

W ARNING! (Continued) • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control. CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. TIRE CHAINS Due to limited clearance, tire chains ar e not recom-[...]

TIRE ROT A TION RECOMMENDA TIONS T ires on the fr ont and rear axles of vehicles operate at differ ent loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates and tend to develop irregular wear pat- terns. These effects can be r educed by timely rotation of tires. The benefits of rotation [...]

TIRE PRESSURE MONITORING SYSTEM (TPMS) The T ire Pr essure Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recom- mended cold placard pr essure. The tire pr essure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decr eases, the tire pr[...]

For example, your vehicle may have a recommended cold (parked for more than thr ee hours) placard pressur e of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressure is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tire pressur e to approximately 26 psi (179 kPa). This tire pressur e[...]

NOTE: • The TPMS is not intended to replace normal tir e care and maintenance or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failure. Under-inf[...]

• Four T ire Pr essure Monitoring Sensors • T ire Pr essure Monitoring T elltale Light T ire Pressure Monitoring Low Pressure W arnings The T ire Pr essure Monitoring T elltale Light will illumi- nate in the instrument cluster , and an audible chime will be activated when one or more of the four active r oad tire pressur es are low . Should thi[...]

1. The compact spare tir e does not have a tire pressur e monitoring sensor . Therefore, the TPMS will not monitor the tire pr essure in the compact spare tir e. 2. If you install the compact spare tir e in place of a road tire that has a pr essure below the low-pressur e warning limit, upon the next ignition key cycle, a chime will sound and the T[...]

The TPMS consists of the following components: • Receiver Module • Four T ire Pr essure Monitoring Sensors • Three T rigger Modules (mounted in three of the four wheel wells) • V arious T ire Pr essure Monitoring System Messages, which display in the Electronic V ehicle Information Center (EVIC) • Y ellow T ire Pr essure Monitoring T ellt[...]

display to the vehicle’s recommended cold placar d pres- sure value. The system will automatically update, the graphic display of the pressur e value(s) will stop flash- ing, and the T ire Pr essure Monitoring Light will extin- guish once the updated tire pr essure(s) have been re- ceived. The vehicle may need to be driven for up to 20 minutes ab[...]

will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Snow or ice around the wheels or wheel[...]

limit in any of the four active road tir es. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to r eceive this information. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may no[...]

Reformulated Gasoline Many areas of the country r equire the use of cleaner burning gasoline referr ed to as “reformulated gasoline”. “Reformulated gasolines” contain oxygenates and are specifically blended to reduce vehicle emissions and improve air quality . The manufacturer supports the use of “r eformulated gasolines”. Properly blen[...]

If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunction Indicator Light” on • poor engine performance • poor cold start and cold drivability • increased risk for fuel system component corr osion T o fix a Non-FFV vehicle inadvertent[...]

MMT is prohibited in Federal and California r eformu- lated gasolines. Materials Added T o Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in additional cost. Ther efore you should not have to ad[...]

Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehic[...]

After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away from and pr otects the vehicle’s surface. CAUTION! • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light (MIL) to turn on. • T o avoid fuel spillage and overfilling, do not “top off?[...]

NOTE: T ighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly , the MIL will come on. Be sure the gas cap is tightened every time the vehicle is refueled. W ARNING! A fire may result if gasoline is pumped into a portable container that is inside of a [...]

V ehicle Certification Label Y our vehicle has a V ehicle Certification Label attached to the driver’s door B-Pillar . The label contains the following information: • Name of manufacturer • Month and year of manufacture • Gross V ehicle W eight Rating (GVWR) • V ehicle Identification Number (VIN) • T ype of V ehicle • Month, Day and H[...]

Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and r ear curb weight values are determined by weighing your vehicle on a commercial scale befor e any occupants or cargo are [...]

TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer car efully re- view this information to tow your load as efficiently and safely as possible. T o maintain warranty coverage, follow the requir ements and recommendations in this m[...]

W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The tongue weight is the downward for ce exerted on the hitch ball by the trailer . In most cases it should not be [...]

consistent steering and brake control and ther eby en- hancing towing safety . The addition of a friction/ hydraulic sway control also dampens sway caused by traffic and cr osswinds, contributing positively to tow vehicle and trailer stability . T railer sway control and a weight distributing (load equalizing) hitch are r ecom- mended for heavier T[...]

T railer Hitch Classification Definitions Class Max. T railer Hitch Industry Standards C l a s sI-L i g h t Duty 2,000 lbs (907 kg) Refer to the “T railer T owing W eights (Maximum T railer W eight Ratings)” chart for the Maximum Gross T railer W eight (GTW) towable for your given drivetrain. All trailer hitches should be professionally install[...]

Note 1 – The trailer tongue weight must be considered as part of the combined weight of occupants and cargo and should never exceed the weight refer enced on the T ire and Loading Information placard. Refer to “T ire–Safety Information” under “Starting and Operating” in Section 5. T railer And T ongue Weight Always load a trailer with 6[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the “T ire and Loading Information placard” under “T ire Safety Information” in Section 5 of this manual f[...]

W ARNING! (Continued) Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident. • When hauling cargo or towing a trailer , do not[...]

4. T ongue weight rating for the trailer hitch utilized (this requir ement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). T owing Requirements — T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tir e inflation pressures ar e essential [...]

CAUTION! If the trailer weighs more than 1,000 lbs (450 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances. W ARNING! • Do not connect trailer brakes to your vehicle’s hydraulic brake lines. [...]

The electrical connections are all complete to the vehicle, but you must mate the harness to a trailer connector . Refer to the following illustrations. 4-Pin Connector 1 — Female Pins 4 — Park 2 — Male Pin 5 — Left Stop/T urn 3 — Ground 6 — Right Stop/T urn 7-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 — Left Stop/T[...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in 1st gear to avoid excessive clutch slippage. Electronic Speed Control — If Equipped − Do not use in hilly terrain or with heavy loads.[...]

RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle (Flat T owing With All Four Wheels On The Ground) Recreational T owing Condi- tion Manual T rans- axle V ehicles Automatic T ransaxle V e- hicles Four Wheel Flat T ow (All Wheels on Ground) Y es Never T wo Wheel Dolly T ow (Front or Rear Wheels on Ground) Ne[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 2 4 䡵 If Y our Engine Overheats ................ 3 2 4 䡵 Automatic T ransaxle Overheating .......... 3 2 5 䡵 Jacking And T ire Changing ............... 3 2 6 ▫ Jack Location ....................... 3 2 6 ▫ Spare T ire Stowage ................... 3 2 6 ▫ [...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the Hazar d W arning flashers. When the Hazard W arning flasher switch is activated, all directional turn signals will flash on and off to warn oncoming traf fic of an emergency . Press the switch a second time[...]

the engine cooling system and turning off the A/C removes this heat. Y ou can also turn the T emperature control to maximum heat, the Mode contr ol to floor , and the fan control to high. This allows the heater cor e to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling [...]

requested speed. If the high speed is maintained, the overheating will r eoccur , as before, in a cyclic fashion. JACKING AND TIRE CHANGING W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never s[...]

Spare T ire Removal Lift up the load floor cover and remove the hold down. Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid the danger of being hit when operating t[...]

W ARNING! (Continued) • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set an automatic transmission in P ARK; a manual transmission in REVERSE. • Never start or run the engine wi[...]

2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. 3. There ar e two front jacking locations and two rear jacking locations on each side of the body . The front locations a[...]

W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Using the swivel wrench raise the vehicle by turning the jack screw to the right. Raise the vehicle only until the tire just clears the surface and enough cle[...]

9. Remove the wheel blocks and lower the jack until it is free. Reassemble the lug wr ench to the jack assembly and stow it in the spare tir e area. Secure the assembly using the means provided. W ARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the[...]

W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transaxle cannot be started this way and may be damaged. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery [...]

W ARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over the battery when attaching the clamps or allow the clamps to touch each other . If acid splashes in your eyes or on your skin, flush the contaminated area immediately with large quantities of water . • A batt[...]

front wheels. Then shift back and forth between RE- VERSE and 1st gear . Usually the least accelerator pedal pressur e to maintain the rocking motion without spin- ning the wheels is most effective. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause axle, tire damage or failure. A tire could explo[...]

CAUTION! DO NOT flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. Manual T ransaxle • Front Wheel Drive (FWD) or All Wheel Drive (A WD) vehicles can be flat towed (all four wheels on the ground) with the transmission in NEUTRAL. • FWD vehicles can be towed with the front wheels elevated. • FWD[...]

Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the r ear wheels are raised. Proper towing equipment is necessary to pr event dam- age to the vehicle. Battery power is requir ed to release the brake/ transmission interlock system. [...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.0L ............. 3 3 9 䡵 Engine Compartment — 2.4L ............. 3 4 0 䡵 Onboard Diagnostic System — OBD II ...... 3 4 1 ▫ Loose Fuel Filler Cap Message ........... 3 4 1 䡵 Emissions Inspection And Maintenance Programs ............................ 3 4 2 䡵 Replacement Part[...]

▫ Cooling System ..................... 3 5 3 ▫ Brake System ....................... 3 5 9 ▫ Automatic T ransaxle (CVT) — If Equipped . . 361 ▫ Manual T ransaxle — If Equipped ......... 3 6 2 ▫ Appearance Care And Protection Fr om Corrosion .......................... 3 6 2 䡵 Fuses .............................. 3 6 8 ▫ Integrated P[...]

ENGINE COMP ARTMENT — 2.0L 1 — W asher Fluid Reservoir 6 — Integrated Power Module 2 — Power Steering Fluid Reservoir 7 — Battery (Under Cover) 3 — Engine Oil Fill 8 — Coolant Pressur e Cap 4 — Air Cleaner Filter 9 — Engine Oil Dipstick 5 — Brake Fluid Reservoir 10 — Engine Coolant Reservoir MAINT AINING YOUR VEHICLE 339 7[...]

ENGINE COMP ARTMENT — 2.4L 1 — W asher Fluid Reservoir 6 — Battery 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Engine Oil Fill 8 — Coolant Pressur e Cap 4 — Brake Fluid Reservoir 9 — Engine Oil Dipstick 5 — Integrated Power Module 10 — Engine Coolant Reservoir 340 MAINT AINING YOUR VEHICLE[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems ar e oper- ating properly , your vehicle will provide excellent per - formance and fuel economy , as w[...]

persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the problem is detected twice in a r ow , the system will turn on the MIL. Resolving the problem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspec[...]

5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and [...]

your vehicle. Refer to these manuals before attempting any procedur e yourself. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment.[...]

Checking the oil while the vehicle is on level ground and only when the engine is hot, will improve the accuracy of the oil level readings. Maintain the oil level between the range markings on the dipstick. The range markings will consist of a crosshatch zone that says SAFE or a cr oss- hatch zone that says MIN at the low end of the range and MAX a[...]

American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API). The manufacturer only r ecommends API Certified engine oils. Engine Oil V iscosity (SAE Grade) SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves[...]

environment. Contact your authorized dealer , service station, or governmental agency for advice on how and where used oil and oil filters can be safely discar ded in your area. Engine Oil Filter The engine oil filter should be replaced at every engine oil change. Engine Oil Filter Selection All of this manufacturer’s engines have a full-flow typ[...]

Maintenance-Free Battery The top of the maintenance-free battery is permanently sealed. Y ou will never have to add water , nor is periodic maintenance requir ed. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery whe[...]

CAUTION! (Continued) • If a “fast charger” is used while the battery is in the vehicle, disconnect both vehicle battery cables before connecting the charger to the battery . Do not use a “fast charger” to provide starting voltage. Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and service[...]

Refrigerant Recovery And Recycling R-134a air conditioning refrigerant is a hydr ofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. How- ever , the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and r ecycl[...]

Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. A void using the wiper blades to remove fr ost or ice from the windshield. Make sure that they are not fr ozen to the glass before turning them on to avoid dam[...]

exhaust system each time the vehicle is raised for an oil change or lubrication. Replace as requir ed. W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Exhaust Gas” in the Safety T [...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine opera[...]

W ARNING! (Continued) • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot. Coolant Checks Check engine coolant (antifreeze) pr ote[...]

CAUTION! • Mixing of engine coolant (antifreeze) other than specified Hybrid Organic Additive T echnology (HOA T) engine coolant (antifreeze), may result in engine damage and may decrease corrosion pro- tection. If a non-HOA T engine coolant (antifreeze) is introduced into the cooling system in an emer- gency , it should be replaced with the spec[...]

When adding engine coolant (antifreeze), a minimum solution of 50% recommended MOP AR 威 Antifreeze/ Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology), or equivalent, in water should be used. Use higher concentrations (not to exceed 70%) if temperatures below ⫺ 34°F ( ⫺ 37°C) ar e antici- pated. Use only high p[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove [...]

long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operatio[...]

• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. • Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory engine coolant (antifr eeze) p[...]

when the pads are r eplaced. However , low fluid level may be caused by a leak and a checkup may be needed. NOTE: If your vehicle is equipped with a manual transaxle , the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. The two systems are separated in the r eservoir , and a leak in one system will not a[...]

Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter . NOTE: Do not allow petroleum-based fluid to contami- nate the brake fluid as seal damage will result! Automatic T ransaxle (CVT) — If Equipped Selection Of Lubricant It is important that the proper lubricant is used in the transaxle to a[...]

(CVTF+4). CVTF+4 is an engineered pr oduct and its performance may be impaired by supplemental additives. Manual T ransaxle — If Equipped Lubricant Selection Use only the manufacturers r ecommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. Fluid Level Check Check the fluid[...]

The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle. What Causes Corrosion? Corrosion is the r esult of deterioration or removal of paint and protective coatings fr om your vehicle. The most common causes of corrosion ar e: • Road salt, dirt and moisture accumu[...]

CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the [...]

heavy soil, use MOP AR 威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner . Do not use scouring pads, steel wool, a bristle brush or metal polishes. Only MOP AR 威 cleaners are r ecommended. Do not use oven cleaner . A void automatic car washes that use acidic solutions or harsh brushes that may damage the wheels’ protective finish. S[...]

Y our leather upholstery can be best preserved by r egular cleaning with a damp, soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed pr omptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOP AR 威 T otal Clean. Care should be taken to avoid soaking you[...]

quarter window equipped with the radio antenna. Do not use scrapers or other sharp instruments which may scratch the elements. When cleaning the rearview mirr or , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirr or . Instrument Panel Cover The instrument panel cover has a low glar e surface which mini[...]

Seat Belt Maintenance Do not bleach, dye or clean the seat belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water . Do not remove the seat belts from the car to wash them. Replace the seat belts if they appear [...]

Cavity Cartridge Fuse Mini- Fuse Description 8 30 Amp Green IOD Sense2 9 40 Amp Green Power Seats 10 20 Amp Y ellow CCN Power Locks/ Interior Lighting 1 1 15 Amp Lt Blue Power Outlet 12 20 Amp Y ellow Ign Run/Acc Inverter 13 20 Amp Y ellow Pwr Run/Acc Outlet RR/Dome Lamp/ Cigar Lighter 14 10 Amp Red IOD CCN 15 40 Amp Green RAD Fan Relay Bat- tery F[...]

Cavity Cartridge Fuse Mini- Fuse Description 23 15 Amp Lt Blue ENG ASD Relay Feed 3 24 15 Amp Lt Blue Power Sunroof Feed 25 10 Amp Red Heated Mirror (If Equipped) 26 15 Amp Lt Blue ENG ASD Relay Feed 2 27 10 Amp Red IGN RUN Only ORC Feed 28 10 Amp Red IGN RUN ORC/OCM Feed 29 Hot Car (No Fuse Re- quired) 30 20 Amp Y ellow Heated Seat (If Equipped) C[...]

CAUTION! • When installing the IPM cover , it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the IPM, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fus[...]

LIGHTS BULBS — Exterior Bulb Number Low Beam/High Beam Headlight ............ H 1 3 Front Park/T urn Signal/Side Marker Light .................. 3157AK or 3157A Front Fog Light ......................... 9145 Center High-Mounted Stop Light (CHMSL) ...................... L E D Assembly Rear T urn/T ail/Stop ..................... 3157 Backup Light .[...]

T ail Lights, Rear T urn Signals and Backup Lights 1. Remove the two push-pins from the tail light housing. 2. Grasp the tail light and pull firmly to disengage the light from the apertur e panel. MAINT AINING YOUR VEHICLE 373 7[...]

3. T wist and remove socket fr om light. 4. Remove the bulb from the socket and r eplace. 374 MAINT AINING YOUR VEHICLE[...]

License Lights 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp fr om the liftgate. 2. Rotate the socket 1/4 turn counterclockwise. MAINT AINING YOUR VEHICLE 375 7[...]

3. Pull the bulb from the socket. Center High-Mounted Stoplight The light is an LED assembly . See your authorized dealer for replacement. 376 MAINT AINING YOUR VEHICLE[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOP AR 威 Engine Coolant/Antifreeze 5 Y ear/100,000 Mile Formula) 7.2 Quarts 6.8 Liters * Includes heater and coolant recovery bottle fi[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) Engine Oil Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard MS-6395. Refer to your engine oil [...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransaxle (CVT) MOP AR 威 CVTF + 4 Automatic T ransmission Fluid Manual T ransaxle MOP AR 威 A TF+4 Automatic T ransmission Fluid Brake Master Cylinder MOP AR 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only reco[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 3 8 2 䡵 Maintenance Schedule .................. 3 8 2 ▫ Required Maintenance Intervals .......... 3 8 4 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions contr ol system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

oil if it has been six months since your last oil change and even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, which- ever comes fir[...]

Once a Month • Check the tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , power steering and transmission and add as needed. • Check all lights and other electrical items for correct operation. A[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (except 2.4L PZEV). ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Date Repair Order # Dealer [...]

48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the a[...]

60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. ❏ Replace the air conditioning filt[...]

72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace the [...]

108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect the brake linings; replace if necessary . ❏ Adjust the parking brake on vehicles equipped with four-wheel disc brakes. ❏ Replace the air conditioning fi[...]

132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Replace th[...]

† This maintenance is recommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V e h i c l e .............................. 4 0 1 ▫ Prepar e For The Appointment ........... 4 0 1 ▫ Prepar e A List ...................... 4 0 1 ▫ Be Reasonable W ith Requests ............ 4 0 1 䡵 If Y ou Need Assistance ................. 4 0 1 ▫ C[...]

䡵 Publication Order Forms ................ 4 0 5 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 0 6 ▫ T readwear ......................... 4 0 7 ▫ T raction Grades ..................... 4 0 7 ▫ T emperature Grades .................. 4 0 7 400 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impair ed customer , who has access to a TDD or a conventional teletypewriter (TTY) in th[...]

the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or related concerns. W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm. In addi- tion, c[...]

T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Adminis- trator , NHTSA, 400 Seventh Street, SW ., W ashington, D.C. 20590. Y ou can also obtain other information about motor vehicle safety from http://www .safercar .gov [...]

• Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -controlled ve- hicle systems and features. They show exactly how to find and correct pr oblems the first time, using s[...]

T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under contr olled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relative performance of tir es depends upon the actual[...]

V ehicle Safety Standard No. 109. Grades B and A repre- sent higher levels of performance on the laboratory test wheel, than the minimum requir ed by law . W ARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive load- ing, either separately [...]

INDEX 10[...]

ABS (Anti-Lock Brake System) .............. 2 6 6 Adding Engine Coolant (Antifreeze) .......... 3 5 5 Adding Fuel ........................... 3 0 5 Adding W asher Fluid ..................... 3 5 1 Additives, Fuel ......................... 3 0 4 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 347 Air Conditioner Maintenance ............... 3 [...]

S h i f t i n g ............................. 2 5 5 Special Additives ...................... 3 6 1 Autostick ............................. 2 5 7 Battery ............................... 3 4 8 Keyless T ransmitter Replacement (RKE) ....... 2 5 Belts, Seat .............................. 7 3 Beverage Cooler ........................ 1 6 0 Body Mechanism[...]

Cargo T ie-Downs ........................ 1 5 7 Cellular Phone ........................ 8 3 , 2 3 6 Center High Mounted Stop Light ............ 3 7 6 Chains, T ire ............................ 2 9 1 Changing A Flat T ire ..................... 3 2 6 Chart, T ire Sizing ........................ 2 7 6 Check Engine Light (Malfunction Indicator Light) .[...]

Corrosion Pr otection ..................... 3 6 2 C r u i s e L i g h t ........................... 1 7 6 Cupholders ............................ 1 5 2 Customer Assistance ..................... 4 0 1 Data Recorder , Event ...................... 5 9 Dealer Service .......................... 3 4 3 Defroster , Rear W indow ................... 1 5 9 De[...]

Emergency , In Case of Jacking ............................. 3 2 6 Jump Starting ......................... 3 3 1 T o w i n g ............................. 3 3 4 Emission Control System Maintenance ...... 342,382 Engine ............................... 3 4 0 Break-In Recommendations ................ 7 0 Checking Oil Level ..................... 3 4 4 [...]

Fluid Level Checks Automatic T ransaxle .................... 3 6 1 Power Steering ........................ 2 6 3 F l u i d s ................................ 3 7 8 Fluids, Lubricants and Genuine Parts .......... 3 7 8 Fog Lights ....................... 128,177,372 Folding Rear Seat ........................ 1 2 3 Folding Rear Seat (Sedan) ..........[...]

General Information ................. 1 8 , 1 1 2 , 3 0 1 General Maintenance ..................... 3 4 4 Glass Cleaning .......................... 3 6 6 Glove Compartment ...................... 1 6 0 Gross Axle W eight Rating .................. 3 1 0 Gross V ehicle W eight Rating ............. 308,310 Hands-Free Phone (uconnect 威 ) .............[...]

Integrated Power Module (Fuses) ............ 3 6 8 Interior Appearance Care .................. 3 6 5 Intermittent W ipers (Delay W ipers) ........... 1 3 2 Introduction ............................. 4 Jack Location ........................... 3 2 6 Jack Operation ....................... 326,327 Jacking Instructions ...................... 3 2 7 Jump[...]

Electronic Stability Pr ogram (ESP) Indicator ......................... 271,273 Engine T emperature W arning .............. 1 7 2 Exterior .............................. 7 4 F o g .......................... 128,177,372 Headlight Switch ...................... 1 2 6 Headlights ........................... 1 2 6 High Beam Indicator ....................[...]

Malfunction Indicator Light (Check Engine) . . 175,342 Manual, Service ......................... 4 0 5 Manual T ransaxle .................. 249,251,362 Downshifting ......................... 2 5 3 Fluid Level Check ..................... 3 6 2 Frequency of Fluid Change ............... 3 6 2 Lubricant Selection ..................... 3 6 2 Map/Reading[...]

Opener , Garage Door (HomeLink 威 ) ........... 1 3 8 Operator Manual (Owner’s Manual) ............ 4 Outside Air Intake ....................... 2 4 3 Overdrive ............................. 2 5 7 Overheating, Engine ................... 169,324 Owner’s Manual (Operator Manual) ......... 4 , 4 0 5 P a i n t C a r e .............................[...]

Rear W iper/W asher ...................... 1 5 8 Recorder , Event Data ...................... 5 9 Recreational T owing ...................... 3 2 1 Refrigerant ............................ 3 5 0 Reminder , Seat Belt ....................... 4 7 Remote Control Door Locks ........................... 2 0 Security Alarm ......................... 1 8 Rem[...]

Inspection ............................ 7 3 Pretensioners .......................... 4 6 Rear Seat ............................. 3 7 Seat Belts (Sedan) ........................ 3 6 Seats ................................. 1 1 7 Adjustment .......................... 1 1 7 Head Restraints ....................... 1 2 0 Heated ..........................[...]

Speedometer and Odometer ................ 1 6 7 Starting ............................... 2 4 9 Automatic T ransmission ................. 2 4 9 Engine Fails to Start .................... 2 5 0 Manual T ransmission ................... 2 4 9 Starting Procedur es ...................... 2 4 9 Steering Power ........................... 262,263 T i l t C [...]

High Speed .......................... 2 8 5 Inflation Pressur es ..................... 2 8 4 Jacking ............................. 3 2 6 L i f e o f T i r e s .......................... 2 8 9 Load Capacity ........................ 2 7 9 Pressur e Monitor System (TPMS) ........... 2 9 3 Pressur e W arning Light .................. 1 7 2 Quality Gradi[...]

Operation ........................... 2 5 3 Overdrive ........................... 2 5 7 Selection of Lubricant ................... 3 6 1 T ransmission Range Indicator ....................... 1 7 2 T ransmitter Battery Service (Remote Keyless Entry) .................... 2 5 T ransmitter , Garage Door Opener (HomeLink 威 ) . . 138 T ransporting Pets[...]

Wheel and Wheel T rim Care ................ 3 6 4 W ind Buffeting ......................... 1 4 7 W indow Airbag (Side Curtain) ............... 5 0 W indow Fogging ........................ 2 4 3 W indows .............................. 3 2 Power ............................... 3 2 W indshield Defroster ...................... 7 3 W indshield W ashers[...]

INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL WARNINGSAND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERA TIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalLocking Doors With The KeyKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationVEHICLE [...]

INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power[...]

2009 C ALIBER C ALIBER Chrysler LL C 81-226-0939 Second Edition Printed in U.S.A. OWNER ’S MANU AL 2009[...]