Doro Secure 350 инструкция обслуживания

Doro Secure 350 English[...]

5 6 7 9 1 0 4 3 2 1 8 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 English 1. Microphone level 2. Additional alert equipment 3. Phonebook 4. Alarm key 5. Powerful amplication (boost) 6. T one control 7. V olume control 8. Cordless alarm pendant 9. Recall key 10. Menu key 11. Delete/back 12. Handsfree/headset key 13. Speed dial keys 14. Call log 15. S[...]

English Contents Installation ................................................................................ 1 Connection .......................................................................... 1 Batteries ............................................................................. 1 Cordless pendant ..........................................[...]

English Installation This device is intended for the analogue telephone network lines in A T , BE, BG, CH, CY , CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT , L V , L T , LU, MT , NL, NO, PL, PT , RO, SI, SK, SE. Connection 1. Connect the curly cord to the handset and then to the socket marked q on the unit. 2. Connect the mains adapter to an[...]

English Check that the pendant is always in contact with the phone by activating the alarm in different places around the premises. See Basic setup / PENDANT, p. 3 how to register (pair) a pendant. Changing batteries in the cordless pendant If the cordless pendant ceases to function, change the batteries. Use only 1 x 12 V (A23, LR23) Alkaline batt[...]

English NAME REC Record a name to be read aloud. Please see Phonebook, p. 9 for instructions. PENDANT (cordless alarm key) The cordless alarm pendant can be used to answer an incoming call or to make an alarm call. The phone comes equipped with 2 cordless pendants which are already paired. T est that the pendants are working with the phone in idle [...]

English RING VOL Select the required ringer volume, then conrm with 0 . BOOST LOCK The powerful amplication (boost) is by default set to switch OFF after every call, this can be changed so the amplication stays switched ON . CAUTION BOOST LOCK = ON should only be activated if all users have impaired hearing and require powerful amplicat[...]

English 2. Press and hold 0 to record a new alarm message (max. 30 seconds). Start recording at the tone, and release 0 when nished. Speak clearly and about 15–20 cm from the keypad. Alternatively , press 0 briey to play the recorded alarm message. 3. Press 0 to conrm and continue. RING LIGHT T o alert you to incoming calls, a ashing [...]

English 2. Select 1 or 2 . Press 0 . 3. Enter the required number and conrm with 0 . T o dial, press and hold 1 or 2 and press or lift the handset. W all mounting The phone can be wall mounted using the included wall mount bracket and two screws (not included). W ARNING Make sure that no cables, water pipes or gas pipes are located inside the wa[...]

English Note! If you wish, you can switch between handset and handsfree mode by simply pressing or lifting the handset. Please remember that in handsfree mode it is only possible for one person at a time to talk. Pre-dialling This allows you to enter and change a phone number before it is dialled. 1. Enter the desired phone number . Mistakes can be[...]

English Answering a call Lift the handset to answer an incoming call, or press . Y ou can also answer in handsfree mode by pressing the key on the cordless pendant. Call timer The display shows the current time when in standby mode. During a call the display will show a call timer instead, indicating the duration of the call. The call duration is d[...]

English Pillow shaker A pillow shaker such as Doro HearPlus 55v can be connected to the socket . Keypad characters key Letters/Symbols 1 [Space character] + & - / X 1 2 A B C Å Ä Æ æ å ä ß 2 3 D E F ë 3 4 G H I ï 4 5 J K L 5 6 M N O Ñ ñ Ö ö 6 7 P Q R S 7 8 T U V Ü ü 8 9 W X Y Z 9 * ` @ ( ) * < > 0 , . : ? = 0 # $ _ % ! ; # [...]

English 2. Enter a phone number . Use v / V to move the cursor and to erase if needed. Use # to insert a pause in the number . 3. Press 0 to conrm. A blinking cursor is displayed on the second line on the display . 4. Enter a name for the contact (see Keypad characters, p. 9 ). 5. Press 0 to conrm. 6. Select ALARM ON or ALARM OFF . Press 0 to[...]

English 4. Use v / V to move the cursor and to erase if needed. Use # to insert a pause in the number . 5. Press 0 to conrm. A blinking cursor is displayed in the rst letter of the name. 6. Use v / V to move the cursor and to erase if needed. 7. Enter a name for the contact (see Keypad characters, p. 9 ). 8. Press 0 to conrm. 9. See Storin[...]

English Caller ID and call log Caller ID allows you to see who is calling before you answer and to see who has called in your absence. If the number is stored in the phonebook, the name is also shown. Note! The Caller ID function must be subscribed. Please contact your network operator for more information. The call log will store the last 15 incom[...]

English 5. Press until (two seconds) EMPTY is displayed. Note! This deletes the Caller ID memory , not the Phonebook memory . T ransferring numbers to the phonebook 1. Press . 2. Use v / V to select desired number . 3. Press and hold W for two seconds. A blinking cursor is displayed in the rst digit of the selected number . 4. Use v / V to move [...]

English Alarm message (AL.MESSAGE) A pre-recorded message “ This is an emergency call, to accept this call, press zero. ” This message will be played unless you decide to record your own message. The alarm message should include your name, address, and how to activate the speakerphone. Example of an alarm message: "This is an emergency cal[...]

English IMPORT ANT! • The only way to stop the alarm sequence is if the called party accepts the call within 60 seconds by pressing 0 (zero), or when all the alarm numbers have been dialled. • The receiver of the alarm call, the alarm contact, can disconnect the call immediately by pressing 1 2 after having accepted the call with 0 . • Automa[...]

English gets wet, you should remove the battery and allow the unit to dry completely before you replace it. • Do not use or keep the unit in dusty , dirty environments. The unit’ s moving parts and electronic components can be damaged. • Do not keep the unit in warm places. High temperatures can reduce the lifespan for electronic equipment, d[...]

LAST P AGE English V ersion 1.1 © 2012 Doro AB. All rights reserved. www .doro.com REV 4516 — STR 201 1-07-14[...]