Dual XDMA6700 инструкция обслуживания

INSTALLATION/OWNER'S MANUAL AM/FM/CD/MP3/WMA/iPod ® /Bluetooth ® Ready  Receiver with  Detachable  Face XDMA6700[...]

2 TYPICAL FRONT-LOAD  DIN  MOUNTING METHOD Please read entire manual before installation. Before You  Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to[...]

3 FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMA6700 uses one 10 amp ATM fuse located beside the wiring connector. XDMA6700  INSTALLATION  Wiring  Diagram BLACK Front Preamp Outpu t WHITE 10-pin Female Mini-DIN IPC2M Connection (sold separately) BLACK[...]

4 The XDMA6700 allows playback of your favorite MP3 and WMA files recorded on CD-R and CD-RW discs. Its powerful on-board DSP processor decodes the compressed audio while maintaining near-CD sound quality. An internal SRAM buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping and allows alphanumeric or direct track search[...]

Faceplate Removal Semi-Permanent  Faceplate Installation Power On/Off   Mode Volume Programmable  Turn-On Volume Mute Preset EQ  Curves General  Operation XDMA6700   OPERATION 5 Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Remove tr[...]

6 Press DISP to select between clock and different types of information, such as radio frequency, CD track/elapsed time, or MP3/WMA/iPod song information. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nn to adjust the hours and TUNE  ll to adjust the minutes. Press DISP momentarily to save the sel[...]

7 XDMA6700   OPERATION General  Operation  -  Setup  Menu Menu Function Options Action Loudness Curve LOUD OFF Disables the loudness function. LOUD ON Enables the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes. Tuner Frequency  Spacing FREQ USA Program[...]

8 Press rotary  encoder momentarily to select between Volume (default), Bass, Treble, Balance and Fader. Press rotary  encoder until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Press rotary  encoder until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Press rotary  encod[...]

9 Seek Tuning Manual Tuning Scan Tuning Band  Storing and  Recalling  Station Presets Automatically Store  Stations Preset Scan Press TUNE nn or TUNE  ll momentarily to seek the next strong station. Press TUNE nn or TUNE  ll for more than two seconds, then release. "MANUAL" will momentarily appear in the display.[...]

10 Insert CD Eject CD Track Select Fast Forward  and Reverse Pause Scan Repeat Random CD-R/CD-RW Compatibility With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD. The unit will change to previous mode of operation (AM, FM, auxiliary input, iPod or[...]

11 XDMA6700  OPERATION  CD  Player  Operation  -  MP3/WMA  Files Playing an  MP3/WMA Disc Displaying Information     Title  Icon   Artist Icon    Album Icon    Folder Icon    Character Support When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on [...]

12 XDMA6700   OPERATION CD  Player  Operation  -  MP3/WMA  Files Press SRCH  for more than three seconds to select between the following modes: • Direct File Select • Alphanumeric File or Folder Search • File or Folder Navigate Press SRCH  for more than three seconds, then release. “MP3 T * " or “WMA T * ” will flas[...]

13 Press SRCH  for more than 3 seconds, then release. Press SRCH  again, an " * " will flash in the display. Use the buttons in the table on page 12 (32 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters. Press   MUTE to advance one character to the right. Press to initiate the selecte[...]

14 CD  Player  Operation  -  MP3/WMA  Files XDMA6700   OPERATION Navigating Note *Folder Access  File Repeat File Repeat (Current Folder  Only) Disc Random Folder Random Disc Intro Folder Intro After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time wi[...]

15 The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management). • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3[...]

16 XDMA6700   OPERATION CD  Player  Operation  -  MP3/WMA  Files An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Onl y MP3 fi les with filen ame exte nsi on (.m[...]

17 Connecting an iPod requires the IPC2M cable (sold seperately). Once connected, press MODE until "IPOD" appears in the display. The iPod will automatically begin playback. If a song is playing on the iPod before it is connected, it will continue to play. Press DISP to select between elapsed time (default), track number, clock, title, ar[...]

18 Press and hold ll or nn to fast forward or reverse a song. Press l / II to temporarily stop playback. Press l / II again to resume playback. Press INT  to play the first 10 seconds of each song. Press INT again to cancel. Press RPT to continuously repeat selected song. Press RPT again to cancel. It is not possible to select songs in repeat mod[...]

19 XDMA6700   OPERATION Bluetooth ®   Operation  (Optional) Overview Connecting a Bluetooth device requires first connecting the Dual BTM60 module (sold separately). When connected to a Dual Bluetooth Ready head unit, the BTM60 supports the HFP (hands-free profile), A2DP (advanced audio distribution profile) and AVRCP (audio video remote con[...]

20 XDMA6700   OPERATION Bluetooth ®   Operation  (Optional) Function Description Making a Phone Call Press once. An "_" will appear on the display. Input the desired phone number using the 0-9, *, # buttons on the head unit front panel. Press to begin dialing. A phone call may also be placed from your mobile device using the [...]

21 XDMA6700   OPERATION Bluetooth ®   Settings  (Optional) Menu Function Options Action Bluetooth Mode  BT ON Enables the BTM60 Bluetooth Interface Module (sold separately). The Bluetooth icon will flash every 10 seconds. BT OFF Disables Bluetooth support. Auto Connect ACNT ON Allows the BTM60 to automatically (re)connect to the most r[...]

22 XDMA6700   WARRANTY Limited  One  Year  Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original pu[...]

23 Problem Cause Action Unit will  not turn on  (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has  power   (but no  sound) Speaker wires not co[...]

Specifications Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1  Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Opera[...]