Dukane 8912-RJ инструкция обслуживания

P ortable LCD Projector Model 8755G-RJ 8912-RJ USER’S MANUAL USER’S MANUAL #070027[...]

1 Projector 8755G-RJ/8912-RJ User's Manual (detailed) Operating Guide Thank you for purchasing this projector . WARNING Before using this product, please read the “Safety Guide” first. After reading, store in a safe place for future reference. About this manual V arious symbols are used in this manual. The meanings of these symbols are des[...]

2 About this manual . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 Prepar ations . . . . . . . . . . . . . . 3 Contents of package . . . . . . . . . . . . .3 Fastening the lens cover . . . . . . . . . .3 Par t names . . . . . . . . . . . . . . . 4 P r o j e c t o r ...................... [...]

3 F astening the lens co ver T o avoid losing the lens cover , please fasten the lens cover to the projector using the enclosed strap. 1. Fix the strap to the strap hole of the lens cover . Thread one end of the stra p through the strap hole of the lens cover and make the loop at the end, and let the other end of the strap through the loop. Not hav[...]

4 Par t names Part names Projector (1) Lamp cover (  54 ) The lamp unit is inside. (2) Focus ring (  18 ) (3) Zoom ring (  18 ) (4) Control panel (  5 ) (5) Elevator buttons (x 2) (  18 ) (6) Elevator feet (x 2) (  18 ) (7) Remote sensor (  13 ) (8) Lens (  18, 58 ) (9) Lens cover (  3 ) (10) Intake vents (1 1) Filter cov[...]

5 Par t names Control panel (1) ST ANDBY/ON button (  15 ) (2) INPUT button (  16, 22 ) (3) MENU button (  22 ) It consists of four cursor buttons. (4) POWER indicator (  15, 60 ) (5) TEMP indicator (  60 ) (6) LAMP indicator (  60 ) R ear panel (1) AUDIO IN1 port (  10 ) (2) AUDIO IN2 port (  10 ) (3) AUDIO OUT port (  1[...]

6 Par t names R emote control (1) VIDEO button (  17 ) (2) COMPUTER button (  16 ) (3) SEARCH button (  17 ) (4) ST ANDBY/ON button (  15 ) (5) ASPECT button (  17 ) (6) AUTO button (  19 ) (7) BLANK button (  21 ) (8) MAGNIFY - ON button (  20 ) (9) MAGNIFY - OFF button (  14, 20 ) (10) HOME button (  14 ) (1 1) END b[...]

7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending fr[...]

8 Setting up On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. Screen size (diagonal) 4 : 3 screen 16 : 9 screen Projection distance Screen height Screen[...]

9 Setting up WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector . Using a damaged projector could then result in re and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or in[...]

10 Setting up Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. WARNING ►Do not disassemble or modify the p[...]

1 1 Setting up NOTE • Be sure to read the manuals for devices before connecting them to the projector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector . - Some PCs [...]

12 Setting up Connecting pow er suppl y At rst, make sure that the power switch of the projector is set to OFF position (marked "O"). 1. Put the connector of the power cord into the AC inlet of the projector . 2. Firmly plug the power cord’s plug into the outlet. WARNING ►Please use extra caution when connecting the power cord, as [...]

13 Remote control Putting batteries Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 1. Holding the hook part of the battery co[...]

14 Using as a simple PC mouse & k eyboar d The enclosed remote control works as a simple mouse and keyboard of the PC, when the projector's USB port (B type) connects with the PC's USB port (A type) port via a mouse cable. (1) HOME key: Press HOME button. (2) END key: Press END button. (3) P AGE UP key: Press P AGE UP button. (4) P AG[...]

15 HOME PAGE UP PAGE DOWN END VIDEO SEARCH FREEZE OFF ON MAGNIFY ASPECT AUTO BLANK MUTE VOLUME KEYSTONE MY BUTTON POSITION 1 2 ESC ENTER MENU RESET COMPUTER T ur ning on the po wer 1. Make su re that the pow er cord is rml y and c orrectl y connected to the projector and the outlet. 2. Remove the lens cover , and set the power switch to ON posit[...]

16 Selecting an input signal 1. Press INPUT button on the projector . Each time you press the button, the projector switches its input port from the current port as below . COMPUTER IN 1  COMPUTER IN 2 VIDEO  S-VIDEO  COMPONENT (Y , Cb/Pb, Cr/Pr) ● While TURN ON is selected for AUTO SEARCH item in OPTION menu (  40 ), the projector wi[...]

17 Operating Searching an input signal 1. Press SEARCH button on the remote control. The projector will start to check its input ports as below in order to nd any input signals. When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operat[...]

18 Adjusting the zoom and f ocus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Operating Focus ring Zoom ring Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet c[...]

19 Adjusting the position 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. 2. Use the ▲/▼/◄ /► cursor but tons to adjus t the picture position. When you want to reset the operation, press RESET button on the remote control during the operation. T o complete th[...]

20 Operating Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the projector will go into the MAGNIFY mode. When the ON button of MAGNIFY is pressed rst after the projector is started, the picture will be zoomed twice. The indication will disappear in sev[...]

21 Operating T empor aril y blanking the screen 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu (  36 ). T o exit from the BLANK screen and return to the input signal screen, press BLANK button again. ● The projector automatically r[...]

22 1. Press the MENU button on the remote control or the projector . The Advanced Menu or EASY MENU, which has priority just after powered on will appear . If you want t o move the me nu position, use the curso r buttons aft er pressing t he POSITION button. While the projector is displaying any menu, MENU button on the projector works as the curso[...]

23 Using the menu function (continued) In the Advanced Menu 2. Use the ▲/▼ cursor buttons to select a menu. If you want to change it to the EASY MENU, select EASY MENU. Then press the ► cursor button, or ENTER button to select an item. The lower layer menu of the selected item will appear . 3. Use the ▲/▼ cursor buttons to select an item [...]

24 EASY MENU EASY MENU Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (  29 ). AUTO KEYSTONE EXECUTE Using the ► button executes the auto keystone function. See AUTO KEYST ONE EXECUTE item in SETUP menu (  34 ). KEYSTONE Using the ◄/► buttons corrects the vertical [...]

25 EASY MENU Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. See BRIGHTNESS item in PICTURE menu (  26 ). CONTRAST Using the ◄/► buttons adjusts the contrast. See CONTRAST item in PICTURE menu (  26 ). COLOR Using the ◄/► buttons adjusts the strength of whole color . See COLOR item in PICTURE menu (  2[...]

26 PICTURE menu PICTURE menu Item Description BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness. Light ó Dark CONTRAST Using the ▲/▼ buttons adjusts the contrast. Strong ó Weak GAMMA Using the ▲/▼ buttons switches the gamma mode. T o adjust the "CUSTOM" modes, see "T o adjust CUSTOM function in GAMMA and COLOR TEM[...]

27 Item Description SHARPNESS Using the ▲/▼ buttons adjusts the sharpness. Strong ó Weak • There may be some noise and/or the screen may icker for a moment when an adjustment is made. This is not a malfunction. MY MEMOR Y This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the [...]

28 PICTURE menu T o adjust CUSTOM function in GAMMA and COLOR TEMP Selecting a mode whose name includes CUSTOM in GAMMA or COLOR TEMP item and then pressing the ► button or ENTER button displays a dialog to aid you in adjusting the mode. Choose an item using the ◄/► buttons, and adjust the level using the ▲/▼ buttons. • When this functi[...]

29 IMAGE menu IMAGE menu Item Description ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. For a computer signal NORMAL ó 4:3 ó 16:9 ó SMALL For a video signal, s-video signal or component video signal 4:3 ó 16:9 ó 14:9 ó SMALL For no signal 4:3 (xed) • This item can be selected only for a proper signal. • NORMAL mo[...]

30 IMAGE menu Item Description H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate icker . Right ó Left • This ite m can be selected only for a computer signal or component video signal. H SIZE Using the ▲/▼ buttons adjusts the horizontal size. Large ó Small • This item can be selected only for a computer signal[...]

31 INPUT menu INPUT menu Item Description PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ó FILM ó TURN OFF • This function is performed only for an interlaced signal of a video, s-video or component video of 525i (480i) or 625i (576i) signal. • When TV or FILM is selected, the screen image will be sharp. FILM adapts to t[...]

32 Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format. AUTO ó NTSC ó P AL ó SECAM N-P AL ó M-P AL ó NTSC4.43 • This item is performed only for a video signal from VIDEO port or S-VIDE[...]

33 INPUT menu Item Description RESOLUTION The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector . (1) In INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ butt[...]

34 SETUP menu SETUP menu Item Description AUTO KEYSTONE EXECUTE Selecting this item performs the automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself. This function will be execut ed only once when selected in the menu. When the slant of the proje[...]

35 SETUP menu SETUP menu (continued) Item Description WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When WHI SPER is s elected, a coustic no ise and s creen brig htness are reduced. MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V :INVERT ó H&V :INVERT If the[...]

36 SCREEN menu SCREEN menu Item Description LANGUAGE Using the ▲/▼ buttons switches the OSD (On Screen Display) language.  TÜRKÇE  POLSKI  SUOMI  ENGLISH  FRANÇAIS  DEUTSCH  ESP AÑOL  IT ALIANO  NORSK  NEDERLANDS  PORTUGUÊS  РУССКИЙ  SVENSKA  뼑鞵  㐕储Ё᭛  ㅔԧЁ᭛  ᣣᧄ?[...]

37 SCREEN menu Item Description ST ART UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreen Screen can be registered by the MyScreen item (  38 ) . ORIGINAL Screen preset as the standa[...]

38 SCREEN menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST ART UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturi[...]

39 SCREEN menu Item Description MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching…” while searching for the input “De[...]

40 OPTION menu OPTION menu Item Description AUTO SEARCH Using the ▲/ ▼ buttons t urns on/of f the automatic sign al search fu nction. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order . The search is started from the current port. Then when an input is found, th[...]

41 Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When th e time i s set t o 0, th e proje ctor is not tur ned of f automatical ly . When the time is set to 1 to 99, and when the passed time with no- signal or an un[...]

42 Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1 and 2 on the remote control (  6 ). Choose 1 or 2 on the MY BUTT ON menu using the ◄/► button rst. Then using the ▲/▼ buttons sets one of the following functions to the chosen button. • COMPUTER1: Sets port to COMPUTER IN1. • COMPU[...]

43 Item Description SERVICE (continued) AUTO ADJUST Using the ▲/▼ buttons enables/disables the automatic adjustment. When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting. FINE ó F AST ó DISABLE FINE: Finer tuning including H.SIZE adjustment.[...]

44 Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally . This function does not have any effect on the remote control[...]

45 Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer . 1. Using Security Features 1.1 Inputting the P ASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER P ASSWOR[...]

46 Item Description SECURITY (continued) 1.3 If you have forgotten your P ASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER P ASSWORD box. 1.3-2 While the ENTER P ASSWORD box is displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10-digit[...]

47 Item Description SECURITY (continued) 2.2-4 Move the cursor to the right side of the P ASSWORD AGAIN box and press the ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time. Pressing the ENTER button will return to MyScreen P ASSWORD on/off menu. When a P ASSWORD is set for MyScreen: • The[...]

48 Item Description SECURITY (continued) 3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄, ►, COMPUTER and INPUT buttons. A PIN Code again box will appear . Reenter the same PIN Code. This will complete the PIN Code registration. ?[...]

49 Item Description SECURITY (continued) 4. Using the T ransition Detector Function While the T ransition Detector function is ON, when power switch is started to supply to the projector , it might react as below . • T ransition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • T ransition Det[...]

50 Item Description SECURITY (continued) 4 .2 - 4 Move the cursor to the right side of the PA S S W O R D A G A I N b o x a n d p r e s s t h e ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time. Pressing the ENTER button will return to the TRANSITION DETECT OR on/off menu. • Please do not[...]

51 NETWORK menu NETWORK menu Item Operation DHCP (Dynamic Host Conguration Protocol) Use the ▲/▼ buttons to turn DHCP on/of f ON ó OFF • Select OFF when the network does not have DHCP enabled. • When the DHCP setting changes to ON, it takes a little time to obtain IP address from DHCP server . • Auto IP function will be assigned an IP[...]

52 NETWORK menu Item Operation DEF AUL T GA TEW A Y Use the ▲/▼/◄/► buttons to enter the default gateway (a node on a computer network that serves as an access point to another network) address. This function can only be used when DHCP is set to OFF . TIME DIFFERENCE Use the ▲/▼ buttons to enter the time difference. Set the same time di[...]

53 NETWORK menu Item Operation INFORMA TION Selecting this item displays the NETWORK -INFORMA TION- dialog for conrming the network settings. • Only the rst 16 characters of the projector name are displayed. • Nothing (blank) is shown in the NAME field until you setup the item. For setup, please refer to “Network Settings” section of [...]

54 Maintenance Lamp A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new lamp, c[...]

55 Maintenance Lamp (continued) Lamp warning HIGH VOL T AGE HIGH TE MPER A TUR E HIGH PRESSU RE • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer . Note that shards of glass could damage the projector ’ s internals, or cau[...]

56 Please check and clean the air lter periodically . When the indicators or a message prompts you to clean the air lter , comply with it as soon as possible. Replace the air lter when it is damaged or too soiled. T o prepare a new air lter , contact your dealer and tell the air lter type number . T ype number : MU04951 When you repl[...]

57 Maintenance 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufciently . 2. After making sure that the projector has cooled adequately , pull the slot cover forward, pushing slightly its edge up, and remove it from the projector . 3. Remove the battery case. Hold the battery case gutter by nger nail or ot[...]

58 Maintenance Inside of the projector In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . Caring for the lens If the lens is awed, soiled or fogged, it could cause deterioration of display quality . Please take care of the lens, being cautious of handling. 1. T urn the [...]

59 T roubleshooting If an abnormal operation should occur , stop using the projector immediately . T r oubleshooting Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company . They will tell you [...]

60 T r oubleshooting R e gar ding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state. Please refer to the sectio[...]

61 Shutting the projector down Only when the projector can not be turned off by usual procedure (  15 ), please push the shutdown switch using a pin or similar , and disconnect the power plug from the power outlet. Before turning it on again, wait at least 10 minutes to make the projector cool down enough. R esetting all settings When it is hard[...]

62 T r oubleshooting Phenomena that may be easy to be mistak en for mac hine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power cord is not plugged in. Correctly connect the p[...]

63 Pheno mena tha t may be easy to b e mi stak en fo r ma chin e def ects (co ntinu ed) Phenomenon Cases not involving a machine defect Reference page No pictures are displayed. (continued) The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function. 25, 26 The computer cannot detect the project[...]

64 Specifications Specifications Specification Item Specification Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, 8755G-RJ F=1.7 ~ 1.9 f = 18.9~ 22.6 mm 8912-RJ F=1.7 ~ 1.9 f = 19.5~ 23.4 mm (approximate[...]

65 Specications Specications (continued) [unit: mm] 340 129 1 1 7 270 BATTERY[...]

1 Projector 8755G-RJ/8912-RJ User’ s Manual (detailed) Network Guide This manual is only intended to explain Network Functions. For safety , operations or any other issues, refer to the Safety Guide or Operating Guide. • Before using this product, please read the Safety Guide first. WARNING • The information in this manual is subject to chan[...]

2 Network Functions Network Functions Conguring and Controlling the Pr ojector via a We b Browser Y ou can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (  4 ) E-mail Aler ts The projector can automatically send an alert to specied e-mail addresses when[...]

3 Network Functions Before Using the Network Functions… T o use the network functions of this projector , the projector must be congured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network conguration of this projector may cause problems on your network. Connect th[...]

4 Conguring and Controlling the Pr ojector via a We b Browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. • Internet Explorer 5.5 or later or Netscape 6.2 or later are required. • If JavaScript is disabled in your web browser conguration, you must enable JavaScri[...]

5 Conguring and Controlling the Pr ojector via a We b Browser When conguring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator and User . The following chart describes the differences between User and Administrator IDs. Below are the factory default settings of IDs and [...]

6 Conguring and Controlling the Pr ojector via a We b Browser Refer to the foll owing for conguring or controlling th e projector via a web browser . Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser and press "Enter" key or click &qu[...]

7 Conguring and Controlling the Pr ojector via a We b Browser Network Infor ma tion All screen images displayed in this manual are screens of a logon using an Administrator ID. Any Administrator only functions will not be displayed when using a User ID. Refer to the descriptions in each table. Displays the projector ’s current network congu[...]

8 Conguring and Controlling the Pr ojector via a We b Browser Network Settings Displays and congures network settings. Click the [Apply] button to save the settings. • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. [...]

9 Conguring and Controlling the Pr ojector via a We b Browser P or t Settings Displays and congures communication port settings. Click the [Apply] button to save the settings. • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network co[...]

10 Mail Settings Displays and congures e-mail addressing settings. Click the [Apply] button to save the settings. • Y ou can conrm whether the mail settings work correctly using the [Send T est Mail] button. Please enable Send mail setting before c licking [Send T est Mail] . • If you connect the projector to an existing network, consult [...]

1 1 Conguring and Controlling the Pr ojector via a We b Browser Aler t Settings Displays and congures failure & warning alert settings. Alert Item Description Cover Error The lamp cover has not been properly xed. Fan Error The cooling fan is not operating. Lamp Error The lamp does not light, and there is a possibility that interior por[...]

12 Alert Settings (Continued) Setting Item Description Alarm Time Congures the time to alert. (Only Lamp T ime Alarm and Filter T ime Alarm.) SNMP T rap Click the [Enable] check box to enable SNMP trap alerts. Send Mail Click the [Enable] check box to enable e-mail alerts. (Except Cold Start and Authentication Failure .) Mail Subject Congures[...]

13 Conguring and Controlling the Pr ojector via a We b Browser Schedule Settings Displays and congures schedule settings. Item Description Daily Congures the daily schedule. Sunday Congures the Sunday schedule. Monday Congures the Monday schedule. T uesday Congures the T uesday schedule. Wednesday Congures the W ednesday schedu[...]

14 Conguring and Controlling the Pr ojector via a We b Browser Schedule Settings (Continued) Item Daily & Weekly Description Schedule Click the [Enable] check box to enable the schedule. Schedule List Displays the current schedule. Item Description Time Congures the time to execute commands. Command Parameter Congures the commands to b[...]

15 Date/Time Settings Displays and congures the date and time settings. Item Description Current Date Congures the current date in year/month/day format. Current Time Congures the current time in hour:minute:second format. Conguring and Controlling the Pr ojector via a We b Browser Daylight Savings Time Click the [ON] check box to enabl[...]

16 Date/Time Settings (Continued) Click the [Apply] button to save the settings. Item Description Time difference Congures the time difference. Set the same time difference as the one set on your PC. If unsure, consult your IT manager . SNTP Server I P Address Congures the SNTP server address in IP format. • The address allows not only IP a[...]

17 Security Settings Item Description Administrator authority Congures the Administrator ID and password. Administrator ID Congures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. Administrator Password Congures the Administrator password. The length of the text can be up to 255 alphanumeric characters[...]

18 Click the [Apply] button to save the settings. Authentication Password Congures the authentication password. The length of the text can be up to 32 alphanumeric characters. Re-ent er Authent icati on Password Re-enter the above password for verication. SNMP Congures the community name if SNMP is used. Community Name Congures the comm[...]

19 Projector Contr ol The items shown in the table below can be performed using the Projector Control menu. Select an item using the up and down arrow keys on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector . Item Description Main Power T urns the power on/off. Input Source Selects the input so[...]

20 Projector Control (Continued) Item Description Image Aspect Selects the aspect ratio. Over Scan Adjusts the over-scan setting. V Position Adjusts the vertical position. H Position Adjusts the horizontal position. H Phase Adjusts the horizontal phase. H Size Adjusts the horizontal size. Auto Adjust Execute Performs the automatic adjustment. Input[...]

21 Option Language Selects the language for the OSD. Menu Position V Adjusts the vertical Menu position. Menu Position H Adjusts the horizontal Menu position. Blank Selects the Blank mode. Startup Selects the start-up screen mode. MyScreen Lock Turns MyScreen lock function on/of f. Message T urns the message function on/off. Auto Search T urns the [...]

22 Network Restar t Restarts the projector ’s network connection. Item Description Restart Restarts the projector ’s network connection in order to activate new conguration settings. • Restarting requires you to re-logon in order to further control or congure the projector via a web browser . W ait 1 minute or more after clicking [Resta[...]

23 E-mail Alerts The projector can automatically send an alert message to the specied e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error . • Up to ve e-mail addresses can be specied. • The projector may be not able to send e-mail if the projector suddenly loses power . NO [...]

24 8) Congure the Failure/W arning Alerts via E-mail settings. Click [Alert Settings] on the main menu. 9) Select and congure each alert item. Refer to Alert Settings in "Conguring and Con trolli ng the Projec tor via a W eb Browser" f or furt her in formati on (  1 1 ). 10) Click the [Apply] button to save the settings. Failu[...]

25 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function. • It is recommended that SNMP functions be carried out by a networ[...]

26 Event Sc heduling Event Scheduling • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display . • The power on / of f event has the lowest priority among the all events that are dened at the same time. • There are 3 types of Scheduling, 1) Daily 2) W eekly 3) Specic date (  27 ). ?[...]

27 Event Sc heduling Schedule Settings Schedule settings can be congured from a web browser . Example: If the IP address of the projector is set to 192.168.1.10: There are three types of scheduling. 1) Daily: Perform the specied operation at a specied time every day . 2) Weekly (Sunday ~ Saturday): Perform the specied operation at the s[...]

28 Date/Time Settings The Date/T ime setting can be adjusted via a web browser . Example: If the IP address of the projector is set to 192.168.1.10: • A Network Restart is required after the Daylight Savings Time or SNTP conguration settings have been changed. • The battery for the built in clock may be dead if the clock loses time even when[...]

29 e-SHOT (Still Image T r ansfer) Display e-SHOT (Still Image T ransfer) Display The projector can display a still image that is transferred via the network. Communication P or t The following port is used for e-SHOT . TCP #9716 e-SHO T (Still Image T r ansfer) Settings Congure the following items from a web browser when e-SHOT is used. Example[...]

30 e-SHOT (Still Image T r ansfer) Display e-SHOT (Still Image Transfer) Settings (Continued) When the authentication setting is enabled, the following settings are required. 6) Click [Security Settings] on the main menu. 7) Select [Network Control] and enter the desired authentication password. 8) Click the [Apply] button to save the settings. •[...]

31 1) Enter "http://192.168.1.10/" into the address bar of the web browser . 2) Enter the Administrator ID and password and click [Logon] . 3) Click [Port Settings] on the main menu. 4) Click the [Enable] check box to open Network Control Port1 (Port: 23) to use TCP #23. Click the [Enable] check box for the [Authentication] setting when a[...]

32 Command Control via the Networ k Command Control Settings (Continued) When the authentication setting is enabled, the following settings are required. (  17 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. 9) Click the [Apply] button to save the settings. • The Authen[...]

33 Command Control via the Networ k Command F or mat Command formats differ among the dif ferent communication ports. ● TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However , the following reply will be sent back in the event of authentication failure when authentication[...]

34 Command Control via the Networ k Reply Data f or ma t The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 1 byte <NAK reply> Reply Connection ID 0x15 1 byte <Error reply> Reply Error code Connection ID 0x1C[...]

35 Command Control via the Networ k Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled. The projector uses a challenge response typ[...]

1 Projector 8755G-RJ/8912-RJ User's Manual (detailed) T echnical Resolution (H x V) H. frequency (kHz) V . frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 640 x 480 43.3 85.0 VESA VGA (85Hz) 800 x 600 35.2 56.3 VESA SVGA [...]

2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE menu. computer Signal Hor izo nta l s ign al tim ing (μ s) computer Signal V ertical sign al tim ing (l ine s) (A) (B) (C) (D) (a)[...]

3 Connection to the ports A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack • V ideo signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V . sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level Pin Signal Pin Signal 1 Video Red 10 Ground 2 Video Green 1 1 (No connection) 3 [...]

4 LAN Connection to the por ts (continued) 4 3 2 1 H VIDEO RCA jack • System: NTSC, P AL, SECAM, P AL-M, P AL-N, NTSC4.43 • 1.0±0.1Vp-p, 75Ω terminator G S-VIDEO Mini DIN 4pin jack Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (P AL/SECAM, burst) 75Ω terminator 2 Brightness signal, 1.0Vp-p, 75Ω te[...]

5 Connection to the por ts (continued) I AUDIO IN1, J AUDIO IN2 Ø3.5 stereo mini jack • 200 mV rms 47kΩ terminator AUDIO IN3 K L, L R RCA jack x2 • 200 mV rms 47kΩ terminator M AUDIO OUT Ø3.5 stereo mini jack • 200 mV rms 1kΩ output impedance T o input SCART RGB signal; ex.: LAN I J M K L T o input SCART RGB signal to the projector , [...]

6 Connection to the por ts (continued) N USB USB B type jack Pin Signal 1 +5V 2 - Data 3 + D ata 4 Gro und 2 1 3 4 LAN O N O CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Pin Signal Pin Signal Pin Signal 1 (No connection) 4 (No connection) 7 RTS 2 RD 5 Ground 8 CTS 3 TD 6 (No connection)[...]

7 RS-232C Communication RS-232C Communication Connecting the cable 1. T urn off the projector and the computer . 2. Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable (cross). Use the cable that fullls the specication shown in the previous page. 3. T urn the computer on, and after the computer has[...]

8 RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the following request code from the PC to the projector . Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector returns the response code ‘1DH’ + data (2 bytes) to the PC. Changing the projector settings (Set[...]

9 Names  Operation T ype Header Command Data CRC Action Type Setting Code Power Set T urn off BE  EF 03 06  00 2A   D3 01  00 00  60 00  00 Turn on BE  EF 03 06  00 BA  D2 01  00 00  60 01  00 Get BE  EF 03 06  00 19  D3 02  00 00  60 00  00 [Example return]  ?[...]

10 RS-232C Communication (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code User Gamma Pattern Set Off BE  EF 03 06  00 FB  FA 01  00 80  30 00  00 9 step gray scale BE  EF 03 06  00 6B  FB 01  00 80  30 01  00 15 steps gray scale BE  EF 03[...]

1 1 RS-232C Communication (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code COLOR TEMP GAIN B Get BE  EF 03 06  00 8C  F5 02  00 B3  30 00  00 Increment BE  EF 03 06  00 EA   F5 04  00 B3  30 00  00 Decrement BE  EF 03 06  00 3B  F4 05  [...]

12 RS-232C Communication (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code OVER SCAN Get BE  EF 03 06  00 91  70 02  00 09  22 00  00 Increment BE  EF 03 06  00 F7  70 04  00 09  22 00  00 Decrement BE  EF 03 06  00 26  71 05  00 09  22 [...]

13 RS-232C Communication (continued) Names Operation T ype Header Command Data CRC Action T ype Setting Code COMPUTER IN1 Set SYNC ON G ON BE  EF 03 06  00 CE D6 01 00 10 20 03  00 SYNC ON G OFF BE  EF 03 06  00 5E D7 01 00 10 20 02  00 Get BE  EF 03 06  00 0D D6 02 00 10 20 00?[...]

14 RS-232C Communication (continued) RS-232C communication command table (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code AUDIO-COMPUTER1 Set AUDIO1 BE  EF 03 06  00 6E  DC 01  00 30  20 01  00 AUDIO2 BE  EF 03 06  00 9E  DC 01  00 30  20 02  00 AUDIO3 BE [...]

15 RS-232C Communication (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code LANGUAGE Set ENGLISH BE  EF 03 06  00 F7  D3 01  00 05  30 00  00 FRANÇAIS BE  EF 03 06  00 67  D2 01  00 05  30 01  00 DEUTSCH BE  EF 03 06  00 97  D2 01  00 05  [...]

16 RS-232C Communication (continued) RS-232C communication command table (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code AUTO KEYSTONE Set TURN OFF BE  EF 03 06  00 EA   D1 01  00 0F  20 00  00 TURN ON BE  EF 03 06  00 7A  D0 01  00 0F  20 01  00 Get [...]

17 RS-232C Communication (continued) RS-232C communication command table (continued) Names  Operation T ype Header Command Data CRC Action T ype Setting Code e-SHOT  Set OFF BE  EF 03 06  00 3A  C3 01  00 00  35 00  00 IMAGE1 BE  EF 03 06  00 AA   C2 01  00 00  35 01  00 IMAGE2 BE  EF 03[...]

1 About The Symbols V arious symbols are used in this manual, the user ’ s manual and on the product itself to ensure correct usage, to prevent danger to the user and others, and to prevent property damage. The meanings of these symbols are described below . It is important that you read these descriptions thoroughly and fully understand the cont[...]

2 Safety Precautions W ARNING Never use the projector if a problem should occur . Abnormal operations such as smoke, strange odor , no image, no sound, excessive sound, damaged casing or elements or cabl es, penetration of liquids or foreign matter , etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and [...]

3 W ARNING Be cautious of High temperatures of the projector . High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn. T ake care of venti[...]

4 W ARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector ’s vent holes. Please car[...]

5 Safety Precautions (continued) CAUTION Be careful in moving the projector . Neglect could result in an injury or damage. • D o n o t m o v e t h e p r o j e c t o r d u r i n g u s e . B e f o r e m ov i n g , d i s c o n n e c t t h e power cord and all external connections, and close the slide lens door or attach the lens cap. • Avoid any i[...]

6 Safety Precautions (continued) NOTE Do not give the remote control any physical impact. A physical impact could cause damage or malfunction of the remote control. • T ake care not to drop the remote control. • Do not place the projector or heavy objects on the remote control. T ake care of the lens. • Close the slide lens door or attach the[...]

7 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hou[...]

8 • If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer . Note that shards of glass could damage the projector ’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp your[...]

9 Regulatory Notices FCC Statement W arning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. W ARN ING: T his equ ipmen t h[...]

2900 Dukane Drive St. Charles, Illinois 60174 www .dukcorp.com/av T oll-free: 800-676-2487 Fax: 630-584-5156 e-mail: avsales@dukcorp.com Audio Visual Products #401-8755E-01[...]