DVDO DVD VCR Combo инструкция обслуживания

062210 1 DVDO iScan Duo Owner’s Manual Supplement Firmware Version 2.20 (Build 067a) This document provides additional information for the DVDO iScan Duo configured with the latest firmware. It is a supplement to the iScan Duo Owner’s M anual. This release includes improvements/bug fixes in Releases 2. 00 B51, 2.10 B62n. The Owner’s Manual Su[...]

062210 2 At each IRE setting, in addition to Red, Green and Blue, the on -screen menu includes White-x, White-y, White- Y adjustments. Ma in Menu > Output Setup > Gray Scale > White-x Ma in Menu > Output Setup > Gray Scale > White-y Ma in Menu > Output Setup > Gray Scale > White-Y 2. Output HDCP Mo de can be tur ned Off S[...]

062210 3 DVDO iScan Duo Owner’s Manual Supplement Firmware Version 2.10 (Build 062n) This document provides additional information for the DVDO iScan Duo configured with the latest firmware. It is a supplement to the iScan Duo Owner’s M anual. This release includes improvements/bug fixes in Release 2.00 B51. The Owner’s Manual Supplement for [...]

062210 4 The TPG automatically generates only the Red primary (75IRE). 5. Enter the measured Red-x value. Note the indicators reflect only the output of the Test Pattern Generator. 6. Select Red-y and enter the measured Red-y value 7. Repeat step 4,5 and 6 with Green-x and Green-y The TPG automatically generates only Green primary (75IRE). 8. Repea[...]

062210 5 480i/240p (treated as one format) 576i/288p (treated as one format) 480 p 576p 720p50 720p60 1080i50 1080i60 1080p24 1080p25 1080p30 1080p50 1080p60 VGA SVGA XGA SXGA The input settings that are saved include Picture Controls Deinterlacer Modes Game Mode Picture Aspect Ratio Active Aspect Ratio Panorama H/V-Zoom H/V-Pan Input Chromaticity [...]

062210 6 The Y/C Delay control shifts the phase of the luminance (Y) with r espect to chrominance (C) in the video signal to correct for delay between Y and C, which causes color smearing in the image. The default setting is 0. This co ntrol is available in the Picture Controls menu. Ma in Menu > Picture Controls > YC Delay 3.2 Chroma Upsampl[...]

062210 7 Ma in Menu > Input Adjust > Input Color Space The menu selection is as follows Auto (default) RGB YCbCr 422 YCbCr 444 4.2 Input Colorimetr y This control is for HDMI inputs only. The iScan Duo will override the colorimetry information that is obtained from the HDMI source (from the HDMI link) and use the colorimetry specified by the [...]

062210 8 Off The iScan Duo turns off HDCP on its input. This feature speeds up the iScan Duo’s ability to lock onto an input signal when HDCP is not needed. 5. New Configur ation con trol A menu item was added to allow users to control the OSD display. 5.1 Menu Timeout The OSD menu timeout determines the time (in seconds) it takes for the iScan D[...]

062210 9 6.2 Mask Level A mask is created when Underscan feature which reduces the output imag e size to less than the maximum display size. Typically Underscan is used if the image g oe s beyond the display. The mask level can be adjusted from 0 IRE (black) to 100 IRE (white) with a slider bar control. The default setting is 0 IRE. This control is[...]

062210 10  Input and Output HDCP modes  Input Colorimetry  Menu Timeout  Menu Navigation  More consistent factory default commands See Updated Serial Automation command docum ent for more details 8. Other Impr ovement s  Added 1080p30 pre-defined output format .  Front Panel displays firm ware version when Info Screen – About[...]

062210 11 DVDO iScan Duo Owner’s Manual S upplement Date: 2/ 15 /10 Firmware Version: 2.00 Build 051 This document provides additional information for the DVDO iScan Duo co nfigured with the latest firmware. It is a supplement to the iScan Duo user manual. 1. Color Management System This iScan Duo release incorporates several new features that ca[...]

062210 12 Note: This control is currently not updating the c hromaticity values in our input EDID Output Chromaticity Similarly, there are the Output Chromaticity controls which are required for accurate calibration. This control is typically not required since the Color Gamut control can cor rect for incorrect chromaticity values provided by the d[...]

062210 13 Using iScan Duo’s Test Pattern Generator 1. Enable test pat tern generator by pressing the ‘Test Pattern O n/Off’ button on the Duo’s remote or using the on -screen menu Output Setup > Test Patter ns > On. 2. Adjust primaries and white point using the on-screen menu. The RGB indicator on the left side of the screen shows the[...]

062210 14 There are 2 ways to use this control. a) Using the iScan Duo’s test pattern generator as a reference so urce b) Using an external video source to generate the re ference test patterns Using iScan Duo’s Test Pattern Gener ator 1. Enable test pattern generator by pressing the ‘Te st Pattern On/Off’ button on the Duo’s remote or us[...]

062210 15 2. Support for Audio only optical and coax sources This feature is for users who have digital audio only (coax and optical) source (i.e. no video source) and want to use it with Duo. Previously this feature is not available because the Duo goes into standby mode when there is no video i nput (auto standby - on). The Duo now detects the pr[...]