Edimax HP-6002K инструкция обслуживания

HP - 6002 User Manual 04- 201 4 / v1.0[...]

1 COPYRIGHT Copyright  Edim ax Technology Co., Ltd. al l rights reserved. No part of this publication may be reprodu ced, transmitted, transc ribed, stored in a retrieval system, or translated in to any languag e or computer language, in any form or by any means, electroni c, mechanical, magnetic, optical, chemical, manual or otherwise, without [...]

2 Contents Chapter 1: Introduction ..................................................................................................................................... 3 1.1 Product Features .................................................................................................................................. 3 1.2 Application .........[...]

3 Chapter 1 : In troduction 1.1 Product Featur es • High-speed d ata transfer rate of up to 600Mbp s, ideal for bandwidth-intensive HD video or 3D video str eaming and online gaming • Features energy saving m ode to reduce power consumption • Up to 300 -meter range over a home's electric al circuit for b etter performance through walls o[...]

4 1.3 Compatibility AV6 00 powerline devic es (HomePlug AV standard ) are incompatib le and cannot be used with 14 Mbps and 85Mb ps powerline devices ( HomePlug 1.0 an d 1.1 standards). 1.4 System Requir ements Operating System Utility supports Wind ows XP/Vista /7/8 CPU Intel P entium III 1.0GHz (or above) RAM 256 MB (or above) Free Disk Space 100[...]

5 Chapter 2 : In terfaces 2.1 LEDs LED Status Description LAN Green LAN port connecte d Blinking LAN activity (transf erring data) Off LAN port not conn ected PLC Green The green indicator turns on and the gre en indicator turns bli nks slowly when the devic e is detecting a powe rline link. The green indicator turns on and the green indicator turn[...]

6 2.2 Button Interface Description Ethernet Port This is a Gigabi t Ether net port for connecti ng to a computer or othe r devices with a networ k port. Group Creates an encrypt ed powerline network g roup automatically (press the but ton for less than 3 seconds ). Leaves an encrypt ed powerline network group (press the button f or 8~12 seconds). R[...]

7 Chapter 3:Utility Software Installa tion 3.1 Win 8 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer. Step 2 Insert the CD into your CD -ROM drive. When the following EZm ax Wizard appears, s[...]

8 Step 4 Click right button on WinPCap 4.1.2 then click “ Properties ” . Step 5 Click Comp atibility tab and check “ Run this program in compatibility mode for:", then selec t Windows 7, then c lick “ Apply ” . Step 6 Then click “ WinPc ap_4_1_2 ” . The wizard will guide you through the setup process.[...]

9 Step 7 When the following WinPcap Compatibility Assistan t appears, select Run the program without ge tting help.[...]

10 Step 8 After the installation is comp lete, click “ Finish ” .[...]

11 Step 9 Click th e “ Edimax PowerLine Utilit y ” , the “ PLC AV600 Utility ” appears, click “ Next ” to continue.[...]

12 Step 10 Select where you want to install the utility software, and then click “ Next ” . Step 11 After the installati on is complete, click “ Close ” .[...]

13 Step 12 An icon will ap pear on your d esktop. Click the icon to open the utility software. Note: You can manage all t he connecte d powerline adapte rs with th e utility so ftware. Ho wever, in stalling the u tility software is optional.[...]

14 3.2 Win XP/Vista / 7 Step 1 Before installing th e utility software, make sure that no other powerline u tility is installed on your compute r. If any other utility software is inst alled, un install it and reboot the c omputer. Step 2 Insert the CD into your CD -ROM drive. When the following EZ max Wizard ap pears, select your m odel. Step 3 Th[...]

15 Step 4 If you have not installed Win Pcap version 4.1.2 ( or higher) on your c omputer before. The wiza rd will guide you through the setup process.[...]

16[...]

17 Step 5 When th e “ Edimax PowerLine Utility ” setup wizard appears, click “ Next ” to continue. Step 6 In the “ Lic ense Agreement ” scree n, please select “ I Agree ” and then click “ Next ” to continue.[...]

18 Step 7 Select where you want to install the utility software, and then click “ Next ” . Step 8 If you confirm to install the utility, click “ Next ” .[...]

19 Step 9 After the installation is comp lete, click “ Close ” . Step 10 An icon will app ear on your deskt op. Click the ic on to open the utility soft ware. Note: You can manage all th e connected powerline adapters with the utility software. However, i nstalling th e utility software i s optional.[...]

20 Ch apter 4 : U sing the U tility Software 4.1 Main Tab The “ Main ” tab provides a list of p owerline adap ters connected to the net work. The upper p anel displays local powerline adapters . Th e lower pan el displays remote powerline adapters in the network. Set Name Select a d evice and click “ Set Name ” to rename the device. Enter P[...]

21 4. 2 Diagnostics Tab The “ Diagnostics ” tab displays the system information and history of all rem ote devices. The upper p anel displays tec hnical data concerning the software and hardware on the host compute r and t he lower panel displays th e history of all re mote devic es.[...]

22 4. 3 About Tab The “ About ” tab contains some b asic information ab out the software. You can also enable or d isable the autoscan fun ction under “ Preferenc es ” .[...]

23 Chapter 5 : Grou p Button This section dem onstrates how to add or remove d evices from a HomeP lug AV n etwork with the “ Group ” button. 5.1 Forming a Hom ePlug AV Logical N etwork When two devic es with different gro up keys are c onnected to the same powerline and you want them to form a logical net work, follow the foll owing proced ure[...]

24 5.2 Joining a Netw ork If you want to add a new powerline device to an existing network , follow th e following procedures: Step 1 Press the “ Group ” b utton on an adapter in th e existing net work (adapter A or B) for less than 3 seconds. The Power LED will st art to blink. Step 2 Within 120 sec onds after the Power LED starts b linking on[...]

25 5.3 Leaving a Netw ork & Joining an other Network If you want to remove a p owerline device from an existing network and ad d it to another net work, follow the following procedu res: Step 1 Press the “ Group ” b utton on the adapte r to be removed (adapter B) for at least 10 seconds. Step 2 Wait for adap ter B to be d isconnected with a[...]

26 Chapter 6: Trou bleshooting If your powerline ada pters have difficu lty communicatin g with each other, try the following proc edures:  Try power cyc ling the u nit by unplugging it from the electric outlet for 10 seconds an d plugging it in again.  Use a p in to hold the reset bu tton down for 2 seconds on each unit you are trying to con[...]

27 Federal Communic ation Commissi on Interfere nce Statement This equipment has b een tested and f ound to comply with the limits f or a Class B digital devi ce, pursuant to Part 15 of FCC Rules. These li mits are designed to provide re asonable pr otection again st harmful interf erence in a residential installation. This equip ment generat es, u[...]

28 EU Declaration of Confor mity English: This equipment is in comp liance with the essential r equirements and other relevant pr ovisions of Directive 2004/108/EC, 2 009/125/EC. Franç ais: Cet équipement est confor me aux exigences essentielles et autr es dispositions de la d irective 2004/108/ EC , 2009/125/ EC Čeština: Toto zařízení je v [...]

29[...]