Eizo S1932 инструкция обслуживания

CONTENTS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Basic operation of Adjustment menu and the icon list Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Adjusting Sharpness 2-5 Setting Enable/Disable for the automatic brightness adjustment function 2-6 T urning off [...]

Thisproducthasbeenadjustedspecicallyforuseintheregiontowhichitwasoriginallyshipped.Ifoperatedoutside thisregion,theproductmaynotperformasstatedinthespecications. Copyright© 2007-2012 EIZO NANAO CORPORA TION All rights reserved. No part of this manual[...]

1 Notice for this monitor This product is suited to general purposes like creating documents, viewing multimedia content. Thisproducthasbeenadjustedspe cicallyforuseintheregiontowhichitwasoriginallyshipped.If theproductisused outsidetheregion,itmaynotoperateas[...]

2 CONTENTS CONTENTS Notice for this monitor .............................................. 1 T o use the monitor comfortably ............................... 1 Chapter 1 Features and Overview ..................... 3 1-1 Features ............................................................ 3 1-2 Buttons and Indicators ................................[...]

3 Chapter 1 Overview and Features Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor . 1-1 Features • Over drive circuit for clear motion pictures • Dual-input system (DVI-D, D-sub) 3-1 “Connecting T wo PCs to the Monitor” ( page 22 ) • BrightRegulator 2-5 “Setting Enable/Disable for the automatic[...]

4 Chapter 1 Overview and Features 1-2 Buttons and Indicators 1 2 3 4 5 6 7 8 Button Adjustment menu 1. Sensor (BrightRegulator) 2. Input signal selection button 3. Mode button 4. Brightness control buttons 5. V olume control buttons 6. Menu button 7. Power/Help button 8. Power indicator Indicator status Operation status Blue The screen is displayed[...]

5 Chapter 1 Overview and Features 1-3 Basic operation of Adjustment menu and the icon list Basic operation of Adjustment menu Displaying the adjustment menu Pressing the function button to change the setting or pressing allows you to display the adjustment menu. When pressing the input signal selection, mode, brightness control, or volume control b[...]

6 Chapter 1 Overview and Features Adjustment menu icon list Icon Function Overview — Determines the setting. Selecting the icon repeatedly allows you to close the adjustment menu. Analog AutoSize Flickering, screen position, and screen size are adjusted automatically . Returns to the pre-adjusted status. Determines the adjustment. AutoRange Every[...]

7 Chapter 1 Overview and Features Icon Function Overview Settings Language Selects a language for the adjustment menu or displaying message. The language setting is toggled by selecting the icon. PowerSave Bright Reg The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and co[...]

8 Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor . The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes color profiles, application software programs for adjustment, and[...]

9 Chapter 2 Settings and Adjustments ● T o use ScreenManager Pro for LCD For the installation and use of ScreenManager Pro for LCD, refer to its User ’ s Manual on the disk. T o adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable. [Connection] (1) Connect the USB port (downstream) of a [...]

10 Chapter 2 Settings and Adjustments 2-2 Screen Adjustment Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor . When performing the advanced adjustment, see “2-3 Color Adjustment” ( page 13 ) and its subsequence pages. Analog Input Themonitorscreenadjustmentisused[...]

1 1 Chapter 2 Settings and Adjustments 3 Perform the AutoSize adjustment again with the analog screen adjustment pattern displayed. ●  T oadjustickering,screenposition,andscreensize automatically [AutoSize] (1) Display Pattern 1 in full screen on the monitor using the “Screen AdjustmentUtility”orthesc[...]

12 Chapter 2 Settings and Adjustments ● T o correct screen position [Position] (1) Select (Position). (2) Adjust the position with (Left) / (Right) / (Down) / (Up) to display the image properly in the display area of the monitor . (3) Select . The adjustment is completed. 5 Adjust the color gradation. ● T o adjust color gradation automatically [...]

13 Chapter 2 Settings and Adjustments 2-3 Color Adjustment ● T o select the display mode (FineContrast mode) FineContrast allows you to select the best display mode easily according to the monitor ’ s application. FineContrast mode Mode Purpose (CUS) Custom mode. Available to change all setting values. (sRGB) sRGB mode. Suitable for color ma[...]

14 Chapter 2 Settings and Adjustments ● T o perform advanced adjustments Independent setting and saving of color adjustment are available for each FineContrast mode. ● Adjustment items in each mode According to the FineContrast mode selected, the adjustable function differs. √ : Adjustmentavailable−:Invalidf[...]

15 Chapter 2 Settings and Adjustments ● T o adjust the contrast [Contrast] The luminance of the screen is adjusted by varying the video signal level. Adjustablerange:0to100% (1) Press . The adjustment menu appears. (2) Select (Color). (3) Adjust the contrast with or of (Contrast). (4) Select . The adjustment is completed. ● T [...]

16 Chapter 2 Settings and Adjustments ● T o adjust the color temperature [T emperature] The color temperature can be adjusted. The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). Inthesamewayasth eametempera[...]

17 Chapter 2 Settings and Adjustments ● T o adjust the hue [Hue] This function allows you to adjust the hue. If you set the hue to a high value, the image turns greenish. If low , the image turns purplish. Adjustablerange:-100to100 (1) Press . The adjustment menu appears. (2) Select (Color). (3) Select (Color Menu). (4) Select (Adv[...]

18 Chapter 2 Settings and Adjustments 2-4 Adjusting Sharpness [Sharpness] This function allows you to emphasize the outline of the image by emphasizing the color difference between the pixels composing the image and to improve a sense of quality and materiality . Contrarily , this function allows you to show the image smoothly by blurring the outli[...]

19 Chapter 2 Settings and Adjustments 2-7 Locking Buttons [Key Lock] [Menu Lock] This function allows you to lock the operation buttons to prevent changing the adjusted/set status. KeyLock: LocksthebuttonsotherthanthePowerbutton. MenuLock:  Locks thebuttonsotherthanthePowe r,Inp utsi[...]

20 Chapter 2 Settings and Adjustments 2-10 Setting Power Indicator ON/OFF [Power LED] This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition. (1) Press . The adjustment menu appears. (2) Select (PowerSave). (3) The On/Of f setting is toggled by selecting (Power LED). On Off (4) Select . The mode selected is se[...]

21 Chapter 2 Settings and Adjustments 2-13 Resuming the Default Setting [Reset] There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. ● T o reset color adjustment values Only the adjustment values in the current FineContrast mode will[...]

22 Chapter 3 Connecting Cables 3-1 Connecting T wo PCs to the Monitor T wo PCs can be connected to the monitor through the DVI-D and the D-Sub mini 15 pin connector on the back of the monitor . Connection examples DVI-D connector D-Sub mini 15-pin Connector D-Sub mini 15-pin Connector DVI-D connector Signal cable (Digital) FD-C39 Signal cable MD-C8[...]

23 Chapter 3 Connecting Cables ● Setting auto-selection of the input signal [Input Signal] Enable :WheneitherPCisturnedofforentersthepower-savingmode,the monitor automatically displays signals of another PC. Disable : ThemonitordoesnotdetectthePC’ ssignalsautomatically .[...]

24 Chapter 4 T roubleshooting Chapter 4 T roubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer . • No-pictureproblems→SeeNo.1-No.2. • Imagingproblems(digitalinput)→SeeNo.3-No.9. • Imagingproblems(analoginput)→SeeNo.[...]

25 Chapter 4 T roubleshooting Problems Possible cause and remedy 7. Interference patterns or pressure marks remain on the screen. • Leave the monitor with a white or black screen. The symptom may disappear . 8. The outline of the letters are colored. • If the [Sharpness] setting is set to a high level, the characters displayed on the monitor ma[...]

26 Chapter 4 T roubleshooting Chapter 5 Reference 5-1 Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor . Use an arm or stand of EIZO option. [Attaching] 1 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. 2 Remove the stand. (Pre[...]

27 Chapter 5 Reference 5-2 Power Saving Mode ■ Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] PC Monitor Power Indicator Operating Operating Blue Power saving ST AND-BY SUSPENDED OFF Power saving Orange [Resumption Procedure] • Operate the mouse or keyboard to resume the normal screen. ■ Digital input Th[...]

28 Chapter 5 Reference 5-4 Specications LCD Panel 19-inch (480 mm) TFT color LCD with anti-glare Viewing angle: Horizontal 178°, V ertical 178° (CR:10 or more) Dot Pitch 0.294mm Horizontal Scan Frequency Analog: 24.8-80kHz Digital: 31-64kHz V ertical Scan Frequency Analog: 50-75Hz (Non-interlace) Digital: 59-61Hz (Non-interlace) (VGA TEXT :[...]

29 Chapter 5 Reference Mass Main unit (including T ilt stand) 6.0 kg (13.2 Ibs.) Main unit (including Height adjustable stand) 7.2 kg (15.9 lbs.) Main unit (including ArcSwing2 stand) 7.0 kg (15.4 Ibs.) Main unit (including EZ-UP stand) 8.8 kg (19.4 lbs.) Main unit (without stand) 5.2 kg (1 1.5 lbs.) Movable range Tilt stand T ilt: 30° Up, 5° Dow[...]

30 Chapter 5 Reference Outside Dimensions (Tilt stand) 152.5(6.0) 100(3.9) 152.5(6.0) 100(3.9) 117(4.8) 131.8(5.2) 65.1(2.56) 117(4.8) 46 (1.81) 80.1(3.15) 75.2 (2.96) 240.4(9.5) 247.1(9.7) 13.3 (0.52) 405(15.9) 378.4(14.9) 1(0.04) 334(13.1) 303(11.9) 1(0.04) 15.5 (0.61) 1(0.04) 15.5 (0.61) 13.3(0.52) 1(0.04) 414.1(16.3) 5° 30° TILT 38.5(1.52) 61[...]

31 Chapter 5 Reference Outside Dimensions (ArcSwing2 stand) 152.5(6.0) 100(3.9) 152.5(6.0) 100(3.9) 117(4.6) 131.8(5.2) 65.1(2.56) 117(4.6) φ200(7.9) 172° 172° SWIVEL 61.5(2.42) 370(14.6) 374(14.7) 334(13.1) 303(11.9) 1(0.04) 1(0.04) 15.5 (0.61) 15.5 (0.61) 13.3 (0.52) 405(15.9) 378.4(14.9) 1(0.04) 13.3(0.52) 1(0.04) 288 ~ 423.5(11.3 ~ 16.7) 38.[...]

32 Chapter 5 Reference Connector Pin Assignment • DVI-D connector Pin No. Signal Pin No. Signal Pin No. Signal 1 T .M.D.S. Data 2- 9 T .M.D.S. Data1- 17 T .M.D.S. Data0- 2 T .M.D.S. Data 2+ 10 T .M.D.S. Data1+ 18 T .M.D.S. Data0+ 3 T .M.D.S. Data2/4 Shield 1 1 T .M.D.S. Data1/3 Shield 19 T .M.D.S. Data0/5 Shield 4 NC* 12 NC* 20 NC* 5 NC* 13 NC* 2[...]

33 Chapter 5 Reference 5-5 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display . This is called clock adjustment. If the clock pulse is not set correctly , some vertical bars appear on [...]

34 Chapter 5 Reference Resolution TheLCDpanelconsistsofnumerouspixelsofspeciedsize,whichareilluminatedtoformimages.Thismonitor consists of 1280 horizontal pixels and 1024 vertical pixels. At a resolution of 1280 x 1024, all pixels are illuminated asafullscreen(1:1). sRGB (Standard[...]

35 Chapter 5 Reference 5-6 Preset T iming The following table shows factory preset video timing (for analog signal only). Mode Dot clock Frequency Polarity Horizontal: kHz V ertical: Hz VGA 640×480@60Hz 25.2 MHz Horizontal 31.47 Negative V ertical 59.94 Negative VGA 720×400@70Hz 28.3 MHz Horizontal 31.47 Negative V ertical 70.09 Positive Macintos[...]

36 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impa[...]

37 For U.S.A. , Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone:(562)431-501 1 declare that the pr oduct T rade name:EIZO Model:FlexScanS1932 is in conformity with Part 15 of the FCC Rules. Operation o[...]

38 Hinweise zur Auswahl des richtigen Schwenkarms für Ihr en Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der AuswahldesSchwenkarmssinddienachstehendenHinwei[...]

4th Edition-March, 2012 03V22195D1 (U. M- S1 93 2)[...]