Electrolux 65320 K инструкция обслуживания

65320 K Cer amic Glass Hob User Instructions[...]

2 Dear customer , Please read these oper ating instructions through carefully . Above all, please observe the “Safety“ section on the first few pages. Please retain these operating instructions for futur e refer ence. P ass them on to any subsequent owners of the appliance. 1 The warning tria ngle and/or specific wor ds ( Warn in g! , Caution! [...]

Contents 3 CONTENTS Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Contents 4 Cleaning and Car e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Ceramic glass cooking surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Stubborn Soilage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 What to [...]

Safety 5 OPER ATING INSTRUCTIONS 1 Safety The safety aspects of this appliance comply with the accepted technical standards and the German Applia nce Safety Law . However , we also consider it our obligation as a manufacturer to make you awar e of the following safety information. Electrical Safety • The new appliance may only be installed and co[...]

Safety 6 Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressur e cleaner . • Clean the hob in accordance with the maintenance and cleaning instructions in this manual. How to Avoid Damage to Y o ur Appliance • Do not use the hob as a work surface or for st orage. • Do not use the cooking zones[...]

Disposal 7 2 Disposal Disposing of pac kaging material All materials used can be r ecycled. The plastics are marked as follows: • >PE< for polyethylene, e.g. as used for the outer wrapping and the bags inside. • >PS< for polystyrene foam, e.g. as used for the packing pieces, com- pletely free of CFCs. The cardboar d is made fr om 80[...]

The Key Features of Your Appliance 8 The K ey Featur es of Y our Appliance • Cerami c glass Cooking Surface : the appliance has a VITRAMIC ® cooking surface made of glass ceramic and 4 fast heating cooking zones. The particularly powerful radiant heater elements significantly shorten the amount of time taken for the zones to heat up. • Sensor [...]

The Key Features of Your Appliance 9 • Timer : all four rings can be automatically switched off using the integrated timer . When the end of the cooking time has been reached, the cooking zone switches off.[...]

Appliance Descriptio n 65320 K 10 Appliance Description 65320 K Cooking zone dimensions: rear left: 145 mm rear right: 17 0/265 mm front left: 120/17 0/2 1 0 mm front right: 145 mm Heat Setting Se l e ction “+“ and “-“ “ On/ Off“ a nd Lo ck C o o k i ng Z o ne Se l ect i on with I nd i ca tor “ Trip l e Ring Zone/Casserole Z o ne“ ?[...]

Appliance Descrip tion 65320 K 11 Contr ol panel 65320 K Mains “On/Off“ button n For switching on the appliance. The appliance is – switched on when the button is touched for approx. one second, – switched off when the button is touched again for one second. When the appliance is switched on the “ Heat Setting/Residual Heat “ displays i[...]

Appliance Descriptio n 65320 K 12 Heat setting selection + and - For setting and adjusting the heat setting ( ! to ) ) for the s elected cooking zone, or when in timer mode, to set or change the r equired cooking time. – The heat setting or the cooking time is incr eased using the + but- ton and the automatic warm up function activated. – The h[...]

Cooking zone safety s witch 13 Automatic pan sensing P an and triple ring sensing is automatically activated when the cooking zone is switched on. If a cooking zone button is pressed, but ther e is not a suitable pan on the cooking zone, or the pan is too small, f (Fault) appear s in the dis- play . This is also displaye d in the case of overheatin[...]

Before Using for the First Time 14 Befor e Using for the First Time Cleaning for the first time Wipe the ceramic glass cooking surface with a damp cloth to r emove any tra ces left from manufacturing. 1 Important: Do not use any caustic, abrasive cleaner s! The surface could be damaged. Oper ation of the Cooking Surface T OUCH CONTROL sensor button[...]

Operation of the Cooking Surface 15 Cooking with the automatic warm up function All four rings on the cooking surface have nine heat settings and are equipped with an automatic warm up function. – ! , lowest heat setting – ) , highest heat setting – a , automatic warm up function. Using the + button select the heat setting that you requir e f[...]

Operation of the Cooking Surface 16 3 If you select a higher setting when the automatic function is in oper a- tion, e.g. from § to % , the pr evious warm up time is taken into account. If you select a lower setting, then the automatic warm up function is brought to an immediate end. If you start cooking again on a cooking zone that is still warm,[...]

Operation of the Cooking Surface 17 Locking/unlocking the contr ol panel At any time during the cooking process, the contr ol panel can be locked, with the exception of the “ On/Off “ button. By this means acci- dental changes to the settings can be prevented. This function is also useful as a child safety measur e. 0 1. Tou c h th e o button u[...]

Operation of the Cooking Surface 18 Timer function Setting/changin g the cooking time 0 1. Select the desired cooking zone using the cooking zone selection but- tons and set the desir ed heat setting. 2. Press the “ Timer “ butt on to activate the timer function for this cooking zone. 3. Using the + or - buttons, set or change the amount of tim[...]

Operation of the Cooking Surface 19 Ending the timer function early There ar e two ways of switching off the timer early: Switching off the cooking zone and timer simultaneously 0 1. Select the desired cooking zone using the cooking zone buttons. If the selected cooking zone is in timer mode (TIMER indicator illumi- nated), the remaining cooking ti[...]

Operation of the Cooking Surface 20 Automatic pan and triple ring sensing P an and triple ring sensing is automatically activated when the cooking zone is switched on. Electronic sensor s ar e fitted under the cooking zones. These detect: – the material that the pan is made of, – the size of the base of the pan. If you select a cooking zone on [...]

Operation of the Cooking Surface 21 Switching on and off the tr iple ring or c asser ole zone (w hen pan and triple ring sensing is switched off): 0 1. Select the cooking zone using the appr opriate cooking zone selection button and set the desired heat setting. 2. Press the “ T riple Ring Zone/Casser ole Zone button k . The middle ring is switch[...]

Tables and Tips 22 T ables and Tips Pa ns The better the pan, the better the r esults. • Y ou can r ecognise good quality pans by the base of the pan. • The base should be as thick and flat as possible. Rough bases (e.g. on cast iron pans) will scr atch the cooking surface when slid. • Use high sided pans for dishes with a lot of liquid, so t[...]

Tables and Tips 23 Y ou will waste ener gy if the.... Tips for cooking with and without the automatic warm up function The automatic warm up function is suitable for: • dishes that start off cold, ar e heated up at a high setting and do not need to be continually watched when cooking, • dishes that ar e put in a hot frying pan. The automatic wa[...]

Tables and Tips 24 T ypical Heat Settings The figures given in the following tables are for guidance only . Exactly which heat setting needs to be used depends on the quality of the pans and the type and quantity of the food. Table: Cooking and Frying Switch Setting Automatic War m U p Time * (Min.) *) When cooking without the automatic warm up fun[...]

Cleaning and Care 25 Cleaning and Car e Cer amic glass cooking surface It is important to clean the cooking surface after each use! 1 Important! Never use aggressive cleaner s such as, for example, coarse scouring cleaners or pan cleaner s that scra tch. 0 1. Always clean the cooking surface after each use. Use a damp cloth and a little washin g up[...]

Cleaning and Care 26 Stubborn Soilage Residues from food that has boiled over First soften these using a wet cloth and then remove r esidues using a glass scraper . 1 Caution! Take car e when using a glass scraper! Then clean the cooking surface with the recommended cleaner s. Sugar 1 Wa rn i n g! Remove burnt on sugar or melted plastic immediately[...]

Cleaning and Care 27 Spots Scale, shiny pearl like spots, metallic iri- descent coloured spots, and food r em- nants from pans that have formed during cooking are best r emoved when the cooking zones are still warm . Use the cleaners and polishes r ecom- mended. If necessary , clean mor e than once. Acids 1 Important! Do not put vinegar , lemons or[...]

What to do if ... 28 What to do if ... A fault may have been caused by a minor operating err or , which you can correct your self with the help of the following instructions. Do not attempt any further repair s if the following instructions do not help in each specific case. 1 Wa rn i n g! Repairs to the appliance should only be carried out by appr[...]

What to do if ... 29 .... the cooking zones do not heat up, even though the displays are working? 0 Check whether – demonstration mode has been activated accidentally . To deactivate this mode, ensur e that the a ppliance is switched off and that the contr ol panel is not locked. Then proceed as follows: 1. Switch on main button. 2. Within 1 0 se[...]

30 .... f is shown in the display? 0 Check whether – a pan that is too small is on the cooking zone. – the cooking zone has been overheated. If a cooking zone button is pressed and the pan on the cooking zone is too small, f (Fault) appear s in the display . This symbol is also displayed in the case of overheating, faults in the elect ronics or[...]

What to do if ... 31 SERVICE AND SPAR E P ARTS In the event of your appliance requiring service, or if you wish to pur- chase spare parts, contact your local AEG Service Force Centre by tele- phoning 087 05 929 929 Y our call will be automatically r outed to the Service Centre covering your post code area. Please ensure that you have r ead the sect[...]

What to do if ... 32 GUAR ANTEE CONDITIONS Guarantee Conditions AEG offer the following guar antee to the fi rst pur chaser of this appl iance. 1. The guar antee is valid for 12 mo nths commencing when the appliance is handed over to the first r etail pur chaser , which must be verified by purchase inv oice or similar docu- mentation. The guara nte[...]

Technical Data 33 INSTALLATION INSTRUCTIONS 1 Important! This appliance must be installed by qualified personnel, according to the ma nufacturer ’ s instructions and to the relevant British Standards. Please observe this instruction, otherwise the warranty will not cover any damage that may occur . T echnical Data Appliance Dimensions Width 57 0 [...]

Regulations, Standards, Directives 34 Regulations , Standar ds , Dir ectives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in respect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in respect of pr operties of electrical cooker s for the household. ?[...]

Installing and Connecting Up 35 Installing and Connecting Up Installing 1 Important: The new appliance is only to be installed and connected up by an approved installer . Please observe this instruction, otherwise the warranty will not cover any damage that may occur . The veneer or plastic coverings on kitchen units around the appliance must be bo[...]

Installing and Connecting Up 36 The separation between the hob and the extractor hood must be at least as large as that given in the extractor hood installation instruc- tions.[...]

Installing and Connecting Up 37 • On tiled work surfaces, the joints in the area wher e the hob sits must be completely filled with gr out. • On natur al stone, synthetic st one, or ceramic s urfaces, the snap- action springs can be bonded in place. • Ensure tha t the seal is corr ectly seated in the frame and that it is seated against the wo[...]

Installing and Connecting Up 38 Electrical connection Assembly and connection of the new appliance may only be performed by an approved installer . Please observe this instruction, otherwise the warranty will not cover any damage that may occur . 1 Attention! Only the cable fitted to the cooking surface recess may be used for connecting up the appl[...]

Installing and Connecting Up 39[...]

AEG Hausger ä te GmbH P ostfach 1 036 D-90327 Nurembur g http://www .aeg.hausgeraete.de © Copyright by AEG ANC 822 947 296 -03- 0899 Hier T ypschild aufkleben! (nur f ü r Werk)[...]