Electrolux 86050 VI инструкция обслуживания

FAVORIT 86050 VI Fully Integr ated Dishwasher User Instructions[...]

2 Dear customer, Please read these user instructions carefully. Please observe the safety instructions on the first few pages of thes e use r i nst ru ctio ns ! Please keep these us er ins tru cti ons for later reference. Pass them on to any subsequent owner o f the a ppl ia nce . 1 The warning tria ngle and/or specific words ( War ni ng ! , Cautio[...]

Contents 3 CONTENTS Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Econ[...]

Contents 4 What to do, if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9 ... Warning tones indicating a fault in the dishwasher. . . . . . . . . . . . . . . . . 30 ...there are problems with the operation of the dishwasher. . . . . . . . . . . . 3 1 ...the wash result is not satisfactory. . . . .[...]

Operating Instructions 5 OPERATING INSTRUCTIONS 1 Safety Instructions The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. Neverthe- less, as a manufacturer we consider it our obligation to make you aware of the following safety information: Installation, Connection an d Placi[...]

Operating Instructions 6 • Never place the dishwasher in ope ration if the mains cable, water inlet or drain hose is damaged; or the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. • If the mains lead is damaged, or is to be repl aced for a longer lead, the cable (obtainable from AEG[...]

Operating Instructions 7 • In the event of a fault, first close the tap, then switch off the appli- ance and unplug it from the mains. If the appliance is permanently wired to the mains: remove the fuse. 2 Disposal Disposing of the Pa ckaging Material Dispose of the dishwasher packaging material correctly. All the packag- ing materials used are h[...]

Operating Instructions 8 Appliance Features, Display and Control Fields Spray Arms Display and Control Fields Container for Sa lt Rating Plat e Container for Rinse Aid Detergent Dispenser Filters Top Spray Arm Rubber Seal for Co n- necting the Water Feed to the Upper Spray Arm Water Hardness Switc h[...]

Operating Instructions 9 Display and Control Panels The control panel consists of the ON/OFF button 9 and the pro- gramme buttons with LED displays. Function buttons: In addition to the stated wash programme the fol- lowing functions can also be set using these buttons: Indicators have the following significance: Function button 1 Switch acoustic s[...]

Operating Instructions 10 Prior to using for the first time Prior to using for the first time, remo v e all the clips with which the dish racks are secured for transport. Then perform the following steps: 0 1. Adjust the water softener 2. Fill with Salt for the Water Softener 3. Fill with Rinse Aid Adjusting the Water Softener To prevent the build [...]

Operating Instructions 11 Adjust the water softener to the ha rd ne ss o f t he wa te r i n y ou r a rea as stated in the table: 0 1. The dishwasher must be switched off. 2. Manual adjustment: Open the dishwasher door. 3. Remove the lower rack from the dishwasher. 4. Turn the water hardness switch to 0 or 1. 5. Re-position the lower rack. 6. Electr[...]

Operating Instructions 12 Filling with Salt fo r the Water Softener 1 Use only salt designed for dishwash ers. Never fill the salt container with any another type of salt (e.g . culinary salt) or dishwasher deter- gent as this would irreparably damage the water softener. Prior to filling with salt, please chec k each time that you really do have a [...]

Operating Instructions 13 Rinse Aid Rinse aid ensures that dishes emerge thoroughly rinsed and spot free while glasses are clear and shining. There are two ways to add rinse aid: • If you use detergent that already contains rinse aid, the detergent and rinse aid are placed in the detergent container. – In this case the rinse aid supply from the[...]

Operating Instructions 14 Filling with Rinse Aid If you use separate detergent and rinse aid, fill up with rinse aid: – prior to using the dishwasher for the first time – whe n the indicator H is illuminated on the control panel. The rinse aid compartment is on th e inside of the dishwasher door. 0 1. Open the door. 2. Press the rinse aid compa[...]

Operating Instructions 15 Adjusting Rinse Aid Dosing 3 As the dishes are washed rinse aid is released from the disp enser into the wash water. The dose is factory set at 4, and can be adjusted from 1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery. 0 1. Open the door of the dishwasher[...]

Operating Instructions 16 In Daily Use • Check the salt and rinse aid leve ls. • Load cutlery and dishes into the dishwasher • Fill with dishwasher detergent • Select a wash programme suitable fo r the cutlery and dishes • Start the wash programme Loading Cutlery and Dishes 1 Sponges, household cloths and any obj ect that can absorb water[...]

Operating Instructions 17 – To avoid damage to glasses, they must not touch – Do not lay small objects (e.g. lids) in the cutlery rack Loading Cutlery 1 Long bladed knives stored in an up right position are a potential hazard . 1 Long and/or sharp items of cutlery su ch as carving knives must be posi- tioned horizontally in the upper basket. 1 [...]

Operating Instructions 18 Place forks and spoons that do not fit in the cutlery tray in the cutlery basket. To ensure that all items of cutlery in the cutlery basket are properly washed, you should 0 1. Place the grid insert on the cutlery rack 2. Place forks and spoons in the grid insert on the cutlery basket with the handle downwards. 3. For larg[...]

Operating Instructions 19 Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rack. 3 To ease the loading of large items at some dishwa sher-models th e two rows of prongs for the right-hand plate insert can be folded down: 0 1. Slightly lift the right plate insert. 2. Fold the plate insert to the left.[...]

Operating Instructions 20 Loading Cups, Glasses and Coffee Services Load small, delicate items and long pointed cutlery in the upper rack. • Arrange items of crockery on the folding cups racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall items. • Lay or hang wi[...]

Operating Instructions 21 Adjusting the Height of the Upper Basket 3 The height of the basket can also be adjusted when it is loaded. Lowering the Upper Basket: 0 1. Pull the upper basket out completely. 2. Holding the upper basket at the rear right, lift it as far as it will go and then lower it vertically. The upper basket will engage in the lowe[...]

Operating Instructions 22 Filling with Detergent 1 Only use dishwasher detergent. Fill with detergent: – Prior to the start of a wash programme (not for the pre wash pro- gramme). The detergent is released into the wash water during the programme. 2 Please observe the manufacturer's dosing and storage recommenda- tions as stated on th e dete[...]

Operating Instructions 23 Concentrated Detergent Based on their chemical compositio n, dishwasher detergents can be split into two basic types: – conventional , alkaline detergents with caustic components –l o w a l k a l i n e concentrated detergents with natural enzymes. 2 The use of 50 °C wash programmes in conjunction with concentrated det[...]

Operating Instructions 24 Selecting the Wash Progr amme (Programme Table) Choose the most suitable wash progra mme with the aid of this table: 1) 1) In addition to the wash progr ammes given in th e table there is the sp ecial programme Pre wash A . Using this programme you can give an initial wash to dishes that are to be stored in the dishwasher [...]

Operating Instructions 25 Start the Wash Programme 0 1. Open the door of the dishwasher. 2. Check that when the dishes and cutl ery are loaded into the dishwasher the spray arms are free to rotate. 3. Open the tap fully. 4. Press the ON/OFF button. The indica tor in the ON/OFF button illumi- nates. 5. Press the programme button for the desired prog[...]

Operating Instructions 26 Interrupting the Wash Programme (only in emergencies) 3 Interrupt a wash programme in progress only when it is absolutely necessary to do so. When the appliance is cl osed ag ain, the air tha t has entered the appliance is heated and expands significantly. As result water may penetrate into the base of the appliance and tr[...]

Operating Instructions 27 Load Sensing – Sensor Logic If a wash programme is started even though there are only a few dishes in the upper and/or lower rack, an in telligent electronic system adjusts the amount of water and the durati on of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly a[...]

Operating Instructions 28 Care and Cleaning 1 Do not under any circumstances use fu rniture care products or aggres- sive cleaners. • If necessary, clean the controls only with a soft cloth and pure warm water. • O ccasionally check the internal cont ainers, door seal, and water inlet for soiling, clean if necessary. Cleaning the Filter 3 The f[...]

Operating Instructions 29 7. Put the flat filter back in the base of the washing compartment 8. Place the coarse/fine filter in the microfilter and press together. 9. Put the filter combination in place and lock by turning the handle clock- wise to the stop. During this process ensure that the flat filter does not protrude above the base of the was[...]

Operating Instructions 30 ... Warning tones indicating a fault in the dishwasher. • If one or two repetitive warning to nes can be heard after the start of a programme, they are indicative of a fault in the dishwasher that you can probably rectify yours elf. After rectification of the fault, press the button for the wash pro- gramme that has been[...]

Operating Instructions 31 ...there are problems with th e operation of the dish- washer. ...the wash result is not satisfactory. The dishes are still dirty. – The wrong wash programme was selected. – The dishes were arranged in such a manner that water has not reached all parts. The dish racks must not be overloaded. – The filter in the base [...]

Operating Instructions 32 – The drain hose is incorre ctly laid. The dishes are wet and dull. – Rinse aid was not used. – The rinse aid container is empty. There are streaks, milky spots or a bluish coating on glasses and dishes. – Decrease rinse aid dosing. There are dried water drops on the glasses and dishes. – Increase rinse aid dosin[...]

Operating Instructions 33 Notes for Test Institutes Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test programme (see Programme Table). Tests in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively an[...]

Installation and Connectio n Instructions 34 INSTALLATION AND CONNECTION INSTRUCTIONS Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level. • To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the thread[...]

Installation and Connection Instru ctions 35 Fitting the Furniture Door Panel (see installation template supplied) 3 The door of the appliance can be fitted with a furniture door panel of the following dimensions: Width: 591 mm – 594 mm Thickness: 16 mm – 24 mm Height: max. 715 mm Weight: max. 10 kg[...]

Installation and Connectio n Instructions 36 Connecting the Dishwasher Water Connection The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations. • The dishwasher must be connected to a cold water supply. •T h e d i s h w a s h e r must [...]

Installation and Connection Instru ctions 37 3 The following section is only applicable to dishwashers that have a safety valve on the threaded hose fitting for the tap: Water inlet hose with safety valve After connecting the double-walled wate r inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure [...]

Installation and Connectio n Instructions 38 Water drain Drain hose 1 The drain hose must not be kinked, crushed or entangled. • Connecting the drain hose : – Maximum permitted height: 1 metre. – Minimum required height 30 cm above the lower edge of the machine. Extension hoses • Extension hoses are available from AEG Service Force. The int[...]

Installation and Connection Instru ctions 39 Leak Prevention System For protection from damage due to water leaks, the dishwasher is equipped with a leak prevention system, the AQUA CONTROL SYSTEM. In the event of a fault, the safety valve immediately interrupts the sup- ply of water to the appliance and the drain pump switches on. It is thus not p[...]

Installation and Connectio n Instructions 40 Electrical Connection Any electrical work required to inst all this appliance should be car- ried out by a qualified elec tr ician or competent person. 1 WARNING - This appliance must be earthed. The manufacturer declines any resp onsibility should these safety measures not be observed. Before switching [...]

Installation and Connection Instru ctions 41 Connections The water inlet and drain hoses, as well as the mains cable must be connected beside the dishwasher as there is insufficient space behind the appliance. The plumbing and electrical installa tion example given below can only be regarded as a recommendation. Two 45° or Straight Connections, Ou[...]

Guarantee Conditions 42 GUARANTEE CONDITIONS Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when th e appliance is ha nded over to the first retail purchaser, which must be verifi ed by purchase invoice or similar doc- umentation. The guarantee does[...]

Service and Spare parts 43 SERVICE AND SPARE PARTS In the event of your appliance requir ing service, or if you wish to pur- chase spare parts, please contac t Service Force by telephoning: 08705 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the adress of your local Service Fo[...]

AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.de © Copyright by AEG 822 946 343 - 0 1 - 060 2 Subject to change without notice[...]