Electrolux CF921CK00 инструкция обслуживания

Part No. F40BP74330000 Form No. BP7433 ETL Model No.: CF921 READ AND SA VE THESE INSTRUCTIONS Ceiling F an Owner's Manual CF921BS00 CF921CK00 CF921GES00 CF921ORB00 Model Number s A V ANT ECO ™ Net W eight: 18.7 Lbs. 54”, 60” or 72” Fan Blades Not Included[...]

WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. [...]

3 ETL Model No.: CF921 EMERSON QUICK ST ART GUIDE The Quick Start Guide covers the installation instructions common for ceiling fan operations. If additional assistance with wiring, alternate hanging systems, or lighting options, proceed to the complete instructions of this Owner’s Manual. The Quick Start Guide sections include page numbers to co[...]

4 1. The receiver must be programmed within 2 minutes of restoring electricity to the fan. Program the receiver code by pushing and holding down the remote control OFF button for 3-5 seconds. The ceiling fan lights will blink when the receiver has completed programming. 2. If programming fails, shut off and turn on the electricity at the wall switc[...]

5 ETL Model No.: CF921 Unpac king Instr uctions 1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. One switch housing assembly c. One ceiling cover d. Five blade flanges e. One hanger ball/downrod assembly f. One hanger bracket g. [...]

6 ETL Model No.: CF921 Electrical R equir ements Ho w to Put Y our Ceiling F an T ogether UPPER SETSCREW DOWNROD HAIRPIN CLIP MOTOR COUPLING SETSCREW CLEVIS PIN HAIRPIN CLIP CLEVIS PIN CLEVIS PIN Figure 2 PIN SETSCREW HANGER BALL DOWNROD Figure 1 If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box [...]

7 ETL Model No.: CF921 Ho w to Put Y our Ceiling F an T ogether (continued) 3. Make sure the grommet is properly installed in the coupling cover, then slide the coupling cover on the downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure that the ceiling cover and the coupling cover are both oriented correctl[...]

8 ETL Model No.: CF921 11. Remove the four switch housing mounting screws (Figure 7) from the switch housing plate. Position the switch housing assembly on the switch housing plate and align the holes in the switch housing assembly with the holes in the plate. Secure the switch housing assembly by installing the four screws (Figure 7). NOTE: Tuck i[...]

9 ETL Model No.: CF921 Ho w to Hang Y our Ceiling F an The fan must be hung with at least 7' of clearance from floor to blades (Figure 8). A T LEAST 7' CEILING FLOOR Figure 8 WARNING ! The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Sup[...]

10 ETL Model No.: CF921 Ho w to W ir e Y our Ceiling F an If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 1. Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may b[...]

11 Installa tion of R emote Contr ol Ba tter y CODE SWITCHES SR600 REMOTE CONTROL BA TTERY COMP ARTMENT COVER TWO AAA BA TTERIES REMOTE CONTROL LEVERS ON 1 234 5 I Figure 13 Your Emerson Ceiling Fan/Light SR600 Remote Control consists of hand-held transmitter and a receiver which is mounted under the fan ceiling cover. The remote control is designe[...]

12 ETL Model No.: CF921 Oper a tion of Y our Remote Control Fan installation must be completed, including the installation of the fan blades, before testing the remote control. WARNING ! Your SR600 Fan/Light remote control (Figure 18) has full control of your fan speed, air flow direction and light intensity. 1. If airflow is desired in the opposit[...]

13 (RET AIN FOR LA TER INST ALLA TION) COUPLING COVER SCREWS (3) COUPLING COVER UPPER FAN MOTOR ASSEMBL Y Figure 16 LIGHT KIT ASSEMBL Y UPPER FAN MOTOR ASSEMBL Y LIGHT KIT ASSEMBL Y SCREW (3) Figure 17 REINST ALL COUPLING COVER SCREWS (3) COUPLING COVER Figure 19 CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circui[...]

Accessories This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. The use of [...]

15 ETL Model No.: CF921 T r ouble Shooting WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the f[...]

16 R epair Par ts 6 BLADES SOLD SEP ARA TEL Y 16 20 15 4 7 1 2 3 9 8 5 19 13 17 12 18 14 10 11 ETL Model No.: CF921[...]

17 R epair Par ts Listing Key Model Numbers No. Description CF921BS00 CF921CK00 CF921GES00 CF921ORB00 * Hanger Ball Assembly, 761655-17 761655-23 761655-35 761655-32 Consisting of: 1 Hanger Bracket — — — — 2 Hanger Ball — — — — 3 Downrod (4.5”) — — — — * Parts Bag Containing: 764124-1 764124-1 764124 764124 4 Wire Connecto[...]

18 ETL Model No.: CF921 Notes[...]

19 ETL Model No.: CF921 Notes[...]

Part No. F40BP74330000 Printed in China 12/10 Form No. BP7433 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 ETL Model No.: CF921 LIMITED W ARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in wor[...]