Electrolux EWF10771 W инструкция обслуживания

user manual Washing Machine EWF 10771 W[...]

Electrolux. Thinking of you. Share more of our thinki ng at www.electrolux.com Contents Safety information 2 Product description 4 Control panel 5 First use 7 Personalisation 8 Daily use 8 Helpful hints and tips 11 Washing programmes 13 Care and cleaning 16 What to do if… 20 Technical data 22 Consumption values 22 Installation 23 Electrical conne[...]

Installation • This appliance is h eavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be re- moved before use. Serious damage can occur to the product an d to property if this is not adhered to.[...]

Product description Your new appliance meets all modern requir ements for effective treatm ent of laundr y with low water, energy and detergent consum ption. Its new washing system allows total use of detergent and reduces wate r consumption so saving energy. 1 2 3 4 5 1 Detergent dispenser drawer 2 Control panel 3 Door opening han dle 4 Drain pump[...]

Detergent dispenser drawer Compartment for detergent used for pre- wash and soak phase or for stain remover used during the stain action phase (if availa- ble). The prewash and soak detergent is added at the beginning of the wash pro- gramme. The stain remover is added during the stain action phase. Compartment for powder or liquid deter- gent used[...]

Spin Reduction By pressing this butt on you can change the spin speed of the selected programme. Easy Iron By selecting this option the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furtherm ore the machine will perform some additional rinses in some programmes. On cotton pro- grammes the maximum spin speed[...]

To empty out the water, please read the paragraph «At the end of the programme». 7.5: Option icons . • Extra Rinse , • Easy Iron , • Sensitive (if available). 7.6: Child safety lock (see «First Use» paragraph). 7.7: Soil degree icon s • Intensive • Normal/Daily • Light/Quick • Super Quick 7.8: • Duration of the selected programm[...]

Personalisation Acoustic signals The machine is provid ed with an acoustic device, which sounds in the following cases: • at the end of the cycle • if there is a fault. By pressing the 4 and 5 buttons simultane- ously for about 6 seconds , the acoustic sig- nal is deactivated (excep t if there is a f ault). By pressing these 2 buttons again, th[...]

Select the required programme by turning the programme selector dial (1) Turn the programme selector dial to the re- quired programme. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating the corre- sponding buttons. The gr[...]

1. Set the washing machine to PAUSE by pressing button 8 . 2. Press button 6 once until the symbol 0’ is displayed 3. Press button 8 again to start the pro- gramme. Important! The selected delay can be changed only after selecting the washing programme again. The Delay Start can not be selected with DRAIN programme. Start the programme by pressin[...]

You can select now a new programme. Opening the door After the programme has s tarted (or during the delay time) the door is locked, if you need to open it, set first the machine to PAUSE by pressing the button 8 . If the icon 7.10 disappears from the display, the door can be opened. If the icon 7.10 does not go off, this means that the machine is [...]

Maximum loads Recommended loads ar e indicated in the washing programme charts. General rules: • Cotton, linen: drum full but not too tightly packed; • Synthetics: drum no more than half full; • Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily[...]

Degrees of water hardness Water hardness is classified in so-called “de- grees” of hardness. Information on har dness of the water in your area can be obtained from the relevant water supply company, or from your local authority. A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow [...]

Programme Maximum and Minimum Tempe rature Cycle Descrip tion Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment SYNTHETICS 60°-C old Main wash - Rinses Maximum spin speed 900 rpm Max. load 3 kg - Red. load 1,5 kg 1) Synthetic or mixed fab rics: underwear, coloured gar- ments, non-shrink shirts, blouses. SPIN, NO[...]

Programme Maximum and Minimum Tempe rature Cycle Descrip tion Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment Max. load 2 kg Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics. Note : A single or bulky item may cause im balance. If the appliance doesn’t perf[...]

Programme Maximum and Minimum Tempe rature Cycle Descrip tion Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment • Draining and spinning : turn the programme selec- tor dial to programme Spin, reduce the spin speed by means of button 2 , and then press button 8 . Important! This programme cannot be used for very[...]

Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the soften ing powder manufac- turer's instructions. This will help to prevent the formation of lime deposits. After each wash Leave the door open fo r a[...]

6. Insert the detergen t dispenser drawer in the guide rails an d push it in. Washing drum Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron. Important! Do not clean the drum with acidic descaling agen ts, scouring agents containing chlorine or iron or steel wool. 1. Remove any rust deposi[...]

7. Remove any objects from the pump im- peller by rotating it. 8. Refit the cap on the emergency em pty- ing hose and place the latter back in its seat. 9. Screw the pump fully in. 10. Close the pump door. Warning! When the appliance is in use and depending on the programme select ed there can be hot water in the pump. Never remove the pump cover d[...]

What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without ca lling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below. During machine operatio n it is possible that the red pilot light of butt on 8 blinks, one of the following alarm c[...]

Problem Possible ca use/Solution The cap on the emergency emptying hose has not been replaced or the filter has not been proper ly screwed in after cleaning action. • Refit the cap on the emergency emp tying hose or screw the filter fully in. Unsatisfactory washing re- sults: Too little detergent or unsuitable detergent has been used . • Increa[...]

Mod. ... ... ... Prod. No. ... ... ... Ser . No. ... ... ... M o d . . . . . .. .. . P ro d . N o . .. . .. . . . S e r. N o . . . . . . . .. . Technical data Dimensions Width Height Depth (door included) 60 cm 85 cm 63 cm Electrical connection Information on the electrical connect ion is given on the rating plate, on the inner edge of the applianc[...]

Installation Unpacking All transit bolts and packing must be re- moved before using the appliance. You are advised to keep all transit devices so that they can be refitt ed if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bot tom. 2. Re[...]

5. Open the porthole and remove the poly- styrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Positioning Install the machine on a flat hard floor. Make sure that air circulat ion around the machine is not impede[...]

Water inlet Warning! This appliance must be connected to a cold water supply. 1. Connect the water inlet hose supp lied with the machine to a tap with a 3/4" thread. Always use the hose supplied with the appliance. Important! Do not use the hose from your previous machine to connect to the water supply. 2. The other end of the inl et hose whic[...]

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. Electrical connection Information on the el ectrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domest ic electrical installa- tion can take the maximu[...]

• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed. electrolux 27[...]

132961750-0 0-372008 www.electrolux.com web portal 1 web portal 2[...]