Electrolux SANTO K 78800 инструкция обслуживания

SANT O K 78800 i Built-In Refriger ator Oper ating and Installation Instructions[...]

Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important informa- tion for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence. P ass them on to possible new owners of the appliance[...]

3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal of old Appliances [...]

4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e unsure about the meaning of these warnings contact the Cu stomer Care Department for assi stance. Intended use • The re[...]

5 Important Safety Instructions • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted. By doing this you ensure that childr en cannot lock themselves in the appliance when playing (there is risk of suffoca- tion!) or get themselves into other d[...]

Disposal Appliance P ackaging Information All materials are envir onmentally sound! They can be disposed of or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior . >PS< for polystyre[...]

Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperatur e. The appliance should therefor e – not be exposed to direct sunlight; – not be installed next to radiator s, boilers or in a very cold r oom e.g. an outho[...]

8 Instructions for building-in the appliance Building-in Dimensions of the recess Height of housing 880 mm Depth of housing 550 mm Width of housing 560 mm It is necessary that the cabinet has a ventila- tion recess with the following dimensions: Depth 50 mm Width 540 mm 540 50 560 550 880 ☞ 1. Press in the joint cover s between the appli- ance an[...]

9 Instructions for building-in the appliance 2. Push the appliance into the housing until stop strip (A) touches the kitchen unit. 3. Open the door and push the appliance against the side of kitchen furniture oppo- site to that of appliance hinges. 4. Fasten the appliance with 4 screws pr ovided in the kit included with the appliance. 5. Snap vent [...]

10 Instructions for building-in the appliance 9. Fix cover (C) on guide (A) until it clips into place. 13. Should the lining up of the furniture door be necessary , use the clearance of slots. At the end of operations, it is necessary to check if the door of the furniture closes properly . 10. Open the appliance door and the furniture door at 90°.[...]

14. Fix cover (D) on guide (B) until it clips into place. PR167/1 D B Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability s hould these safety mea- sures not be observed. [...]

Description of the appliance 3.The wire colour ed brown must be connected to the terminal marked “L” or coloured r ed. 4.Upon completion there must be no cut, or str ay strands of wir e pre- sent and the cord clamp must be secur e over the outer sheath. Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. En[...]

13 Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). ☞ Starting up and temper ature r egulation Important! Only use the appliance when built–in! ☞ 1. Connect the appliance to the mains electricity supply . When the refriger ator compartment doo[...]

14 Interior Accessories Stor age shelves Various glass stor age shelves are included with your appliance. The height of the storage shelves can be adjusted: ☞ 1. To do this pull the stor age shelf for- ward until it can be swivelled upwards or downwar ds and removed. 2. Please do the same in rever se to insert the shelf at a different height. Y o[...]

Corr ect storage For physical reasons, ther e are differ ent temperatur e regions in the fridge. The coldest region is on the lowest stor age shelf. Warmer r egions are the top stor- age shelf, the vegetable drawer and the storage compartments on the door . The arrangement example shows at which places in the refriger ator suitable tem- peratur es [...]

Cleaning and Car e For hygienic reasons the appliance interior , including interior acces- sories, should be cleaned regularly . Warning! • The appliance must not be connected to the mains during cleaning. Danger of electrical shock. Before cleaning switch the appliance off and remove the plug fr om the mains, or disconnect from the elec- tricity[...]

17 Ener gy Saving Tips • Do not install the appliance near boilers, r adiators or other sour ces of heat. High ambient temperatur es cause longer , more frequent operation of the compr essor . • Ensure sufficient air cir culation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings. • Do not p[...]

18 What to do if ... The compressor does not start immediately after changing the temperatur e setting. This is normal, no error has occurred. Water in the bottom of the cabinet. Water dr ain hole is blocked. See the “Cleaning and Care” section. The compressor starts after a period of time. Symptom P ossible Cau se Remedy Appliance does not wor[...]

19 Changing the light bulb Warning! Ther e is a risk of electric shocks! Before changing the light bulb , switch off the appliance and unplug it, or disconnect from the power supply . Light bulb data: 220-240 V, max. 15 W ☞ 1. To switch off the appliance, turn the thermostat knob to position "0". 2. Unplug the mains plug. 3. To change t[...]

20 Regulations , Standards , Guidelines This appliance was designed for household use and was manufactured in accordance with the appr opriate standards. The necessary measur es in accordance with appliance safety legislation r egulations (GSG), acci- dent prevention r egulations for refriger ation appliances (VBG 20) and the regulations of the Ger[...]

21 T echnical terminology • Refrigerant Liquids that can be used to a generate a cooling effect ar e known as refriger ants. They have a relatively low boiling-point, indeed so low , that the warmth from the food stor ed in the fridge or freezer can cause the refriger ant to boil and vaporise. • Refrigerant Cir cuit Closed circulation system th[...]

[...]

[...]

AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Electrolux plc 2003 2222 754-5 1 -02- 0 203 Subject to change without notice[...]