Encore electronic ENUWI-G2 инструкция обслуживания

ENUWI-G2 802.11g Wireless USB 2.0 Adapter User’s Guide[...]

TABLE OF CONTENT Introduction ............................................................................................................................... .... 1 Overview of this User’s Guide ................................................................................................... 1 Unpacking and Setup ...............................[...]

INTRODUCTION Congratulations on your purchase of EN CORE 802.11g Wirele ss USB 2.0 Adapter. This manual helps to get familiar w ith ENCORE 802.11g Wireless USB 2.0 Adapter. This manual contains detailed inst ructions in operation of this product. Please keep this manual for future reference. With a Wireless LAN (IEEE 802.11g) US B 2.0 Adapter, a de[...]

UNPACKING AND SETUP This chapter provides unp acking and setup information for ENC ORE 802.11g Wireless USB 2.0 Adapter. Unpacking Open the box of ENCORE 802.11g Wire less USB 2.0 Adapter and carefully unpack it. The box should contain the following items:  One 802.11g Wirele ss USB 2.0 Adapter  One Driver & Utility CD-ROM If any item is [...]

HARDWARE INSTALLATION LED Indicator LINK The LINK LED lights green when ENCORE 802.11g Wireless US B 2.0 Adapt er is connected to a network succe ssfully. Otherwise the LINK indicator blinks green while the 802.11g Wireless USB 2.0 Adap ter is access the wireless network. Check the installation The LED of ENCORE 802.11g Wireless USB 2.0 Adap ter is[...]

SOFTWARE INSTALLATION This section will lead you to install the driver and ut ility of the 802.11g Wireless USB 2.0 Adapter. There are 2 ways to install the adapters: 1. Utility and Driver Installation using Adapter Setup Wizard (for Windows XP/Vista only) Insert Encore 802.1 1g Wireless LAN Adapter Driv er & Utility CD-ROM into computer’s CD[...]

2. Click “Finish” to finish the installation. 5[...]

3. Plug-in your 802.11g Wirele ss USB 2.0 Adapter into yo ur computer’s USB port . 4. When start the utility first time, you w ill see the Wireless Configuration Utility Country Selector, select th e country domain where you ar e using this Wireless device, users are r esponsible for ensuring that the region domain configuration is in compliance [...]

WIRELESS UTILITY SETTING Windows® XP users may use the built-in wireless utility as default. The following instructions are f or Service Pack 2 user s. If you are using Windows® 2000/ 98/ME, you must use the Wireless Utility. With the Wireless utility, users can confi gure all the functio ns provided by the Wireless LAN Adapter Utility. Double-cl[...]

Configuration This is the page where you can change the basic settings of the 802.11g Wireless USB 2.0 Adapter with the minimum amount of effort to implement a secure wireless network environment. SSID: The SSID differentiates one Wireless LAN group name from another; so all access points and all devices attempting to connect to a specific Wireless[...]

Preamble: Select Long or Short/ Long (aut o) Preamble type. Preamble is a sequence of bits transmitted at 1Mbps that allows th e PHY circuitry to reach steady-state demodulation and sy nchronizat ion of bit clock and frame start. Two different preambles and header s are de fined: the mandator y supported Long Preamble and header, whic h interoperat[...]

Shared Key/Open System Network Key: Choos e the encryption way, either in HEX or ASCII formats, and enter the password in the blank space. Key Length, Key Format and WEP Key: If you select 64bit in Hex format, you must type 10 values in the following range (0~F, hexa decimal), or 64bit in ASCII format, you must type 5 values in the following range [...]

WPA / WPA2 WPA2 (Wi-Fi Protected Access 2) is the second generati on of WPA; providing enterprise and consumer Wi-Fi user with a high level of assurance t hat only authorized user can access their wireless networks. WPA2 is based on th e final IEEE802.11i amendment to th e 802.11 standard and is eligible for FIPS 140-2 compliant. WPA2 is select, co[...]

Site Survey Available Network The screen sh ows all the Wireless LAN devices around your Wireless LAN USB Adapter. The information of the wireless devices includes the SSID, MAC Address, Channels, Signal, the Security type and the Network mode. You can click the “ Refresh ” butt on to find the new wir eless LAN devices, and double-click the dev[...]

Profile Add: Click “ Add ” to create a new prof ile, set the related valu es such as Profile name, SSID, Wireless Mode a nd Security settings than click ”Apply” to save the profile. Edit: Click “Edit” to modify existing profile, modify the settings than click ” Apply ” to save the profile. Remove: Choose a profile name in the “Ava[...]

TECHNICAL SPECIFICATIONS General Standards IEEE 802.11g, USB 2.0, 1.1, 1.0 Radio Technology IEEE 802.11b -- DSSS IEEE 802.11g -- OFDM Data Transfer Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps (auto sense) Receiver Sensitivity 54Mbps: T ypical -68d Bm @ 10% PER (Packet Error Rate) 1 1Mbps: T ypical -83dBm @ 8 % PER (Packet Error Rate) Frequ[...]