Encore electronic ENXTV-X2 инструкция обслуживания

ENXTV -X2 External TV T uner PRO (Remote controller included) ENXTV Series User ’ s Guide V ersion 1.0[...]

ENXTV -X2 User ’ s Guide User ’s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated in to any language in any form or by any means, except documentation kept by th e purchaser for backup purposes, without the express written[...]

ENXTV -X2 User ’ s Guide Content s: Chapter 1: Introduction 4 1.1 Package Contents ........................................................................................................... ...... 4 1.2 System Requirements........................................................................................................ ... 4 1.3 Main Featu[...]

Chapter 1: Introduction The ENXTV - X2 is an excellent solution in co mbining a computer and a TV system without the need for screw driver or software driver . Enhance your computer to a home theater quality system adding a high quality TV receiver , just plug-in cables and power adapter . The ENXTV -X2 provides high quality , high resolution of up[...]

1.3 Main Features Resolution up to WSXGA: 1680x1050 Resolution. The m ost optimized VIDEO display setting is 1024 × 768 with the vertical refr esh rate at 75Hz gives th e best performance In a generic 15 inch LCD monitor , while in 20 in ch LCD W ide monitor users can set up to 1680x1050 PIP Function supports sub-Video display in PC: In addition t[...]

Chapter 2: Getting S tarted 2.1 Rear panel connectors ENXTV -X2 cable connection is easy . The most typi cal cable connections are shown in the picture diagram below . Make sure the power cable is not connected when hooking these cables in. CONNECTOR TYPE DESCRIPTION DC In 5mm, INT+, EXT - AC adapter , power in (5V , 2 A) VGA Out 15 pin D-Sub conne[...]

CONNECT OR TYPE DESCRIPTION S-Video In 7-pin Min Din connecto r S-VHS type external video input source. Can be used for DVD, VCR or Camcorder Video In RCA Jack External composite video input source, can b e co nnected to DVD, VCR or Camcorder . 。 Audio In (L/R) RCA Audio jack RCA audio jack used for e xternal audio input source. 2.3 Cable Connect[...]

Chapter 3: Using the ENXTV -X2 This chapter shows how to use the ENXTV -X2. 3.1 PC side VGA resolution setting ENXTV -X2 can be used independent of PC system for a full scr een display . In addition to the full screen display , when it is connected in conjunction with the Computer system, the PIP sub video Window can also be displayed at the top of[...]

1. In windows system, the VGA resolution setting page can be invoked by a right click on the mouse when it is pointed at an empty monitor screen area. 2. When the “Display properties” page is shown, select the recommended value 1024x768. 3. Click on the “Advanced” button, to select the monitor refresh rate, the recommended vale is 75Hz 4. C[...]

Chapter 4: Using the Remote Control The included Infra Red Remote control allows you to operate ENXTV - X2 remotely , such as turning your TV on/of f, changing channels, adjust volume, etc. Aim the front of the Remote Control at the Remote Control Receiver and press the control buttons as you would on the infrared rays receiver . 4.1 Installing Bat[...]

4.3 How to use the Menu In this section the ENXTV -X2 Main Menu and its operations will be discussed here. Press the MENU button from the remote control to get to this screen (TV mode must be in Full Screen Mode) Use the CH+ / CH- keys to move the cursor to the desired item (Left and Right), once the desired selection is highlighted click MENU key [...]

4.4 OSD Display MENU Settings PIC PICTURE SOUND ADV ANCED SETTING PICTURE BRIGHT : Sets for screen brightness CONTRAST : Sets for screen contrast SA TURA TION: Sets for saturation HUE: Sets for Color Hue SHARPNESS: Sets for sharpness[...]

SOUND VOLUME: T o adjust Audio Out volume MUTE: Audio Out volume mute BALANCE: T o adjust Audio Left or right track Out volume ADV ANCED SETTING NOISE REDUCTION: 3 degrees adjust image noise reduction BLACK LEVEL: 2 degrees adjust image black level CHANNEL SURF: 4,9,16 video division of TV wall mode PIP MODE SET : 4,9,16 video divi sion of PIP mode[...]

TUNE CURRENT CH: Display current TV channel EXCHANGE CH: Change the current channels sequence list EXCHANGE SA VE: Save the adjusted channels sequence list SKIP: Skip/no skip current TV channel FINE TUNING: Adjust current TV signal quality AUTO SCAN: Auto process of scanning TV signal MANUAL SCAN: manual process of scanning TV signal[...]

SYS TVSYSTEM: P AL system standard setting BLUESCREEN: Background color is blue when no signal input VIDEOSOURCE: TVA VSV input video source selection DISPLA Y SCALE: Switch to wide image resolution. RESOLUTION: Output image resolution selection DISPLA Y TYPE: Support CR T OR LCD output RESET : Comeback factory default setting[...]

OSD LANGUAGE: OSD menu language selection: Chinese and English H POSITION: Adjust OSD Horizontal position V POSITION: Adjust OSD vertical position BACK COLOR: Change the OSD back color TRANSP ARENCY : Adjust OSD background transparency OSD TIMEOUT : OSD caption reserved time Chapter 5: T echnical Support V isit our web site at http://www .encore-us[...]