EnGenius ETR9350 инструкция обслуживания

Wireless-N Pocket A P/Router E TR 9350 Ultra Portable Poc ket AP (Travel Router) V1.0[...]

1 1. Package Contents .......................................................................................................................................................... 5 2. System Requirements ................................ ...................................................................................................................[...]

2 8.2.5 Advanced ............................................................................................................................................. 90 8.2.6 Tools ................................................................................................................................................. 101 8 .3 AP and Client Bridge [...]

3 Revision History Version Date Notes 1.0 October 21, 2009 Initial Release version[...]

4[...]

5 1. Package Contents  EnGenius TRAVEL ROUTER Ultra Portable Pocket AP  AC Power Cord  RJ45 Ethernet LAN Cable  CD -ROM with User Manual and Setup Utility  QIG 2. System Requirements  RJ45 Ethernet Based or 3G USB Internet Connection  Computer with Wireless Network function  Windows, MAC OS or Linux based operating systems ?[...]

6 3. Introduction TRAVEL ROUTER is the world’s smallest 11n Wireless Router and Access Point with 3G connectivity that brings superior convenience for users who need to create a wireless network to share the Internet, documents or multimedia fil es quic kly between computers at speeds of up to 300Mbps. Also, you can leave the bulky power adapter [...]

7 4. Features • WORLD’S SMALLEST AP Superior design to bring you the world’s smallest 11n AP Router for a true portable wirel ess solution . • INTERNAL POWER No need to bring bulky power adapt ers for improved space saving conveni ence. • 3G MOBILE INTERNET SHARING Attach a 3G USB adapter to wirelessly share your 3G Internet connecti on t[...]

8 5. Hardware Overview RJ45 This RJ45 port can b e configu red as WAN or LAN mod es. WAN: Connect t o the Internet using DSL/Cable mod em. LAN: Connect t o a computer, switch or hub. 3G USB Attach a 3G USB adapter to share your 3G Internet con nection. When 3G USB adapter is connected, RJ45 automatically is s et to LAN mod e.[...]

9 LED Lights icon Description Mobile 3G Color – Blue Lights when 3G USB ad apter is c onnected. Blinks when 3G da ta transfer. Wireless LAN Color – Blue Lights when Wirel ess signal is activat ed. Blinks when Wirel ess data transfer. WPS Color – Blue Blinks when W PS handshake is initializ ed. LAN Color – Blue Lights when wired network devi[...]

10 6. Before you Begin This section will guide you through the installation process. Placement of the TRAVEL ROUTER is very important to avoid poor signal reception and performance. Avoid placing the device in enclosed spaces such as a closet, cabinet or wardrobe. 6.1 Consid erations fo r Wireless Install ation The operating distance of all wireles[...]

11 6.2 AP Router / AP / Client Bridge Mode s There are three main modes to select from which will influence the installation of the TRAVEL ROUTER. This section will help you determine which mode works with your setup. AP Router Mode AP Router Mode allows you to share an Internet connection to multiple computers. AP Mode AP mode allows you to have a[...]

12 6.3 Ch eck Network Se ttings (Windows XP/V ista) 1. Click Start button and open Contro l Panel. Windows XP Windows Vista[...]

13 3. Right click on [ Local Area Connection ] and select [ Properties ]. Windows Vista, click [ View Network Status and Tasks ] then [ Manage Network Connections ] 2. Windows XP, click [ Network Connection][...]

14 4. Check “Client for Microsoft Networks”, “File and Printer Sharing” , and “Internet Protocol (TCP/IP) is ticked. If not, please install them. 6. Select “Obtain an IP Address automatically” a nd “Obtain DNS server address automatically” and click [ OK ]. 5. Select “Internet Protocol (TCP/IP)” and click [ Properties ][...]

15 7. Hardware Installation AP Router Mode : One type of Internet connection is required. Please either connect the network cable from your DSL/Cable modem t o the RJ45 port on the TRAVEL ROUTER or connect a 3G adapter to the USB po rt. Note: Wh en 3G USB adapter i s connected, RJ45 auto matically is set to LAN mod e.[...]

16 AP Mode : Connect the network cable to the RJ45 port. Power On : Use the AC Power cord to connect TRAVEL ROUTER and outlet or any other power supplies to provide the electricity to the device. Wired Network[...]

17 8. Configuring Travel Router This section will show you how to configure the devic e using the web -b ased configuration interface. Please use your wireless network adapter to connect the TRAVEL ROUTER. Default Settings IP Address 192.168.0.1 Username / Password admin / admin Wireless Mode Enable Wireless SSID EnGenius xxxxxx Wireless Security N[...]

18 8.1 Setup Wizard 1. Open a web browser (Internet Explorer/Firefox/S afari) and enter the IP Address http://192.168.0.1 Note: If you have changed the default IP Address assigned t o the TRAVEL RO UTER, ensure you enter t he correct IP Address . 2. The default username and password is admin . Once you have entered the correct username and password[...]

19 3. You will see the following screen if the log on process is successful. 4. Click Wizard to enter the Setup Wizard. Then click Next to begin the wizard.[...]

20[...]

21 5. Select the Operation Mode. Please ensure you have the proper cables connected as described in the Hardware Installation section.[...]

22 8.1.1 AP Router Mode a) The device will now automatically search for the correct Internet settings. b) The most appropriate WAN type will be determined and select ed automatically. If it is incorrect, please select Others to set up the WAN settings manually.[...]

23 c) There are many WAN ser vice types available. Please obtain the correct settings from your Internet Service Provider (ISP). Static IP Address If yo ur ISP P rovider has ass igned y ou a fixed IP address, enter the assigned IP address, Subnet mask, D efault Gateway IP address, and Primary D NS and Seconda ry DNS (if available) of your ISP provi[...]

24 Dynamic IP Address The IP Address is allo cated automaticall y. However some IS P’s will also recogniz e the MAC addres s and will reject c onnections if the MA C address do es not match. If your ISP has rec orded the MAC address of your compu ter’s Ethernet LAN card, please conne ct only the co mputer with the auth orized MAC address, and c[...]

25 PPP over Ethernet ISP requires an account us ername and pas sword. PPP over Ethernet Username: Username assign ed to you by the IS P Password: Password for this userna me. Service: You can assign a na me for this servi ce. (Optional) MTU: The maximum size of packets. Do not change unless mentioned by the IS P .[...]

26 Point- to -Point Tunneling Protocol (PPTP) PPTP is used by some ISPs.[...]

27 PPTP WAN Interfa ce Settings WAN Interface T ype: Select whether the ISP is set to Stati c IP or Dynamic IP addresses. Hostname: Th is is optional. Only required if specifi ed by ISP MAC: The MAC Address that is used to c onnect to the ISP. PPTP Settings Login: Username assign ed to you by the IS P Password: Password for this userna me. Service [...]

28 Mobile 3G Please ensure y our 3G USB card is connected to th e TRAVEL ROUTER and has an active USIM card inserted. Mobile 3G Pin Code: Enter the Pin cod e for your USIM card if required. APN Code: Enter the APN cod e for the n etwork provider Dial Number: Only required if specifi ed by ISP User Name: Account Userna me. Only requ ired if specifie[...]

29 Layer-2 Tunneling Protocol (L2TP)[...]

30 L2TP WAN Interface Se ttings WAN Interface T ype: Select whether the ISP is set to Stati c IP or Dynamic IP addresses. Hostname: This is optional. Only r equired if specifi ed by ISP MAC: The MAC Address that is used to c onnect to the ISP. L2TP Settings Login: Username assign ed to you by the IS P Password: Password for this userna me. Service [...]

31 d) Setup the level of wireless security to be used. EnGenius recommends the Highest level of security to be used. Note: 802.11n wirele ss speeds may not be achievable if the security is setup to Lo west and Low level. SSID: Enter the name of your wireless n etwork. Key: Enter the security key for your wir eless networ k.[...]

32 e) Check the settings are correct, and then click Reboot to apply the settings.[...]

33 8.1.2 AP Mode a) Select the level of wireless security to be used. EnGenius recommends the Highest level of security to be used. Note: 802.11n wirele ss speeds may not be achievable if the security is setup to Lowest and Low level. SSID: Enter the name of your wireless n etwork. Key: Enter the security key for your wir eless network.[...]

34 b) Check the settings are correct, and then click Reboot to apply the settings.[...]

35 8.1.3 Client Bridge Mode a) In this mode, the TRAVEL ROUTER will connect to a wireless network as a client device. Please enter the SSID and security settings of that wireless network. b) Check the settings are correct, and then click Reboot to apply the settings.[...]

36 8.2 Web-Based Configuration 8.2.1 System Status This page allows you to monitor the status of the device.[...]

37 Status Model: Description of this de vice. Mode: The device is curren tly in which mode. Uptime: The duration about the d evice has been operating without po wering down or reboot. Current Date/ Time: The device’s syste m time. If this is incorrect, plea se set the ti me in the Tools / Time page. Hardware version and Serial Number: Hardware in[...]

38 WAN Settings Attain IP Protocol: Method used to conn ect to the Internet IP address: The WAN IP Address of the device. Subnet M ask The WAN Subnet Ma sk of the device. MAC address The MAC address of the device’s WAN Interface. Primary and S econdary DNS: Primary and Sec ondary DNS serv ers assigned to the WAN connection.[...]

39 LAN Settings IP address: The LAN IP Addres s of the d evice. Subnet M ask The LAN Subnet Ma sk of the device. DHCP Server Whether the DHC P server is Enabled or Disabled. WLAN Settings Channel: The wireless chann el in use. ESSID: The SSID (Networ k Name) of the wir eless network. (up to 4 SSID’s ar e supported) Security: Wireless encryption i[...]

40 LAN This page allows you to modify the device’s LAN settings.[...]

41 LAN IP IP address: The LAN IP Addres s of this device. IP Subnet Mask: The LAN Subnet Ma sk of this device. 802.1d Span ning Tree: When Enabled, the Spa nning Tree pr otocol will prev ent network lo ops in your LAN network.[...]

42 DHCP Server DHCP Server: The DHCP Server au tomatically all ocates IP address es to your LAN de vices. Lease Time: The duration of the DHCP server allocates each IP address to a LAN de vice. Start / End IP: The range of IP addres ses of the DHCP server will all ocate to LAN devices. Domain name: The domain name for this LAN network.[...]

43 Two DNS servers can be assigned for use by your LAN devices. There are three modes available. DNS Servers From ISP: The DNS server I P address is assigned fr om your ISP. User-Defined: The DNS server I P address is assign ed manually. DNS Relay: LAN clients are a ssigned the device’s IP address as the DNS server. DNS requests are rela yed to t[...]

44 DHCP This page shows the status of the DHCP server and also allo ws you to control how the IP ad dresses are allocated.[...]

45 The DHCP Client Table shows the LAN clients that have been alloca ted an IP address from the DHCP Server . DHCP Client Ta ble IP address: The LAN IP addres s of the client. MAC address: The MAC add ress of the client’s LAN interfac e. Expiration Time: The time that the all ocated IP addres s will expire. Refresh: Click this button to update th[...]

46 You can also manually specify the IP address that will be allocated to a LA N client b y associati ng the IP address with its MAC address. Type the IP address you would like to manually assign to a s pecific MAC address and click Add to add the condit ion to the Static DHCP Table.[...]

47 Schedule This page allows you to schedule times that the Firewall and Power Saving features will be activate d / deactivated. Click Add to create a Schedule entry.[...]

48 Schedule Schedule Descript ion: Assign a name t o the schedule. Service: The service provid es for the schedu le. Days: Define the Days t o activate or de activate the schedule . Time of day: Define the Time of day to activate or deactivated the s chedule. Please use 24-hour cl ock format.[...]

49 Log This page displays the system log of the device. When powered down or rebooted, the log will be c leared. Log Save: Save the log to a fil e. Clear: Clears the log. Refresh: Updates the log.[...]

50 Monitor This page shows a histogram of the WAN and Wireless LAN traffic. The information is automatically updated every five seconds.[...]

51 Language This page allows you to change the Language of the User Interface.[...]

52 8.2.2 Internet The Internet section allows you to manually set the WAN type connection and its related settings. Status This page shows the current status of the device’s WAN connection.[...]

53 Dynamic IP Address The IP Address is allocated automatically. However some ISP’s will also rec ognize the MAC address and will reject connections if the MAC address does not match. If your ISP has recorded the MAC address of your computer’s Ethernet LAN card, please con nect only the compu ter with the authorized MAC address, and click the C[...]

54 Dynamic IP Add ress Hostname: This is optional. Onl y required if specifi ed by ISP MAC address: The MAC Address that is used to c onnect to the ISP. DNS Servers Two DNS servers can be assigned for us e by your LAN device s. There are two mode s available. From ISP: LAN devices are as signed the DNS s erver IP address o f your ISP. User-Defined:[...]

55[...]

56 PPP over Ethernet ISP requires an accoun t username and pas sword.[...]

57 PPP over Ethernet (PPPoE) Username: Username assigned to y ou by the ISP Password: Password for this userna me. Service: You can assign a nam e for this service. (Optio nal) MTU: The maximum size o f packets. Do not change u nless mentioned b y the ISP. Authentication type Select whether the ISP u ses PAP or CHAP method s for auth entication. Se[...]

58 Point- to -Point Tunneling P rotocol (PPTP) WAN Interface T ype: Select whether the ISP is set to Static IP or will allocate Dynamic IP addr esses.[...]

59 Hostname: This is optional. Onl y required if specifi ed by ISP MAC address: The MAC Address that is used to c onnect to the ISP. Login: Username assign ed to you by the IS P Password: Password for this userna me. Service IP Addre ss: The IP Address of the PPTP serv er. Connection ID: This is optional. Onl y required if specifi ed by ISP MTU: Th[...]

60 Layer-2 Tunnelin g Protocol (L2TP) L2TP is used by some ISPs.[...]

61 Layer-2 Tunnelin g Protocol (L2TP) WAN Interface T ype: Select whether the ISP is set to Stati c IP or will alloca te Dynamic IP addr esses. Hostname: This is optional. Onl y required if specifi ed by ISP MAC: The MAC Address that is used to c onnect to the ISP. Login: Username assign ed to you by the IS P Password: Password for this userna me. [...]

62 Mobile 3G Please ensure y our 3G USB card is connected to th e TRAVEL ROUTER and has an active USIM card inserted.[...]

63 Mobile 3G Pin Code: Enter the Pin cod e for your USIM card if required. APN Code: Enter the APN cod e for the n etwork provider Dial Number: Only required if specifi ed by ISP User Name: Account Userna me. Only required if specified by ISP Password: Account Password . Only required if specified by ISP Type: You can choose the method that the rou[...]

64 8.2.3 Wireless The Wireless section allows you to configure the Wireless settings. Status This page shows the current status of the device’s Wireless settings.[...]

65 Basic Radio: Enable or Disabl e the device’s wir eless signal. Mode: Select between Ac cess Point or Wireless Distributi on System (WDS ) modes. Band: Select the types of wireless clients that th e device will accept. eg: 2.4 Ghz ( B+G) Only 802.11b and 11g clients will b e allowed. Enable SSID#: Select the number of SSID’s (Wirel ess Networ[...]

66 Wireless Distribution System (WDS) Using WDS to connect Access Point wirelessly, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. Note that compatibility between differen t brands and models is not guaranteed. It is recommended that the WDS netw ork be created using the same mo[...]

67 Advanced This page allows you to configure wireless advance settings. It is recommended the default se ttings are used unless the user has experience with these functions.[...]

68 Advanced Fragment Threshol d: Specifies the size of the packet per frag ment. This function can reduc e the chance of packet collision . However when this value is set too l ow, there will be i ncreased overheads resulting in poor perf ormance. RTS Threshold: When the packet size is smaller than th e RTS Threshol d, then the pack et will be sent[...]

69 Security This page allows you to set the wireless security settings.[...]

70 Security SSID Selection : Select the SSID that the security settin gs will apply to. Broadcast SS ID: If Disabled, then th e device will not be br oadcasting th e SSID. Theref ore it will be in visible to wireless clients. WMM: WiFi Multi-Media is a Quality of Servic e protocol whic h prioritizes traffic in the order acc ording to voice, video, [...]

71 IEEE 802.1x is an authen tication prot ocol. Every user must us e a valid account to login to this Acce ss Point before accessing the wireles s LAN. The authentication is pr ocessed by a RADIUS s erver. This mod e only authenticat es users by IEEE 8 02.1x, but it d oes not encrypt the data during communication. 802.1x Authenticat ion RADIUS Serv[...]

72 WEP Encryption: WEP Encryption Authentication Type: Please ensure that your wireless clien ts use the same authentication type. Key Length: Select the desired option, and ensur e the wireless clients use the sa me setting.  64 Bit - data is encrypt ed, using the defaul t key, before being trans mitted. You must enter at least the default ke y[...]

73 WPA Pre-Shared Key Encryption: WPA Pre-Shared Key Encryption Authentication Type: Please ensure that your wireless clients us e the same authenticati o n type. WPA type: Select the WPA encryption you would li ke. Please ensure that your wireless clien ts use the sa me settings. Pre-shared Key Type: Select whether y ou would like to enter the Key[...]

74 WPA RADIUS Encryption: WPA RADIUS Enc ryption WPA type: Select the WPA encryption you would like. Please ensure that your wireless clien ts use the sa me settings. RADIUS Server IP address: Enter the IP address of the RADIUS Ser ver RADIUS Server Port: Enter the port numb er used for connec tions to the RA DIUS server. RADIUS Server password: En[...]

75 Filter This page allows you to create filters to control w hich wireless clients can connect to this device by only allowing the MAC addresses entered into the Filtering Table.[...]

76 Wireless Filt er Enable Wireless Access Control: Tick the box to Enabl e Wireless Acc ess Control. When Enabled, only wireless clients on the Filtering Table will be allo wed. Description: Enter a name or descrip tion for this entry. MAC address: Enter the MAC add ress of the wireless client that you wish t o allow connection. Add: Click this bu[...]

77 Wi -Fi Protected Setu p (WPS) WPS feature is following the Wi-Fi Alliance WPS standard and it eases the set up of security-enabled Wi-Fi networks in the home and small office environment. It reduces the user steps required to configure a network and supports tw o methods that are familiar to most consumers to configure a network and enable secur[...]

78 Wi -Fi Protected Setup (WP S) WPS: Tick to Enable the WPS feature. WPS Button: Tick to Enable the WPS push button. Wi -Fi Protected Setup Info r mation WPS Current Status: Shows whether the WPS function is Con figured or Uncon figured . Configured means that WPS has been us ed to authori ze connection between the devi ce and wireless clients. SS[...]

79 There are two methods to initialize the WPS feature. They are th e Push Button and Pin code methods. 1. WPS Push Button Method Push the WPS button on the TRAVEL ROUTER device. The WPS L ED light will start to flash to indicate that the WPS process is ready. While the WPS LED is flashing on the TRAVEL ROUTER, press the WPS button on your wireless[...]

80 2. Pin Code Method Note the Pin code of your TRAVEL ROUTER device. Please use this Pin code to initialize the WPS process from the wireless clie nt configuration utility. This process will be different for each brand or m odel. Please consult the user manual of the wireless client for more information.[...]

81 Client List This page shows the wireless clients that are connected to the TRAVEL ROUTER device.[...]

82 Policy This page allows you to configure the access policies for each SSID (wireless network). Policy WAN Connection: Allow wireless cli ents on this SSID t o access the WAN port which typical ly is an Internet connection. Communication be tween Wireless clients: Whether each wirel ess client can c ommunicate with each other in this SSID. When D[...]

83 8.2.4 Firewall The Internet section allows you to set the access control and Firewall settings. Enable This page allows you to Enable / Disable the Firew all features. When Enabled, Denial of Service (DoS) and SPI (Stateful Packet Inspection) features are also be enabled.[...]

84 Advanced You can choose whether to allow VPN (Virtual Private Network) packets to pass throug h the Firewall.[...]

85 DMZ This feature, if enabled, allows the DMZ computer on your LAN to be exposed to all users on the Internet.  This allows almost any application to be used on the “DMZ PC”  The “DMZ PC” will receive all Unknown connectio ns and data.  If the DMZ feature is enabled, please enter the IP address of t he PC to be used as the “DMZ[...]

86 Denial of Service ( DoS ) Denial of Service (Denial of Service) is a type of Internet at tack that sends a high amount of data to you wit h the intent to overload your Internet connection. Enable the DoS firewall feature to automatically detect and block these DoS attacks.[...]

87 MAC Filter You can choose whether to Deny or only Allow those computers listed in the MAC Filtering table to access the Internet. MAC Filter Enable MAC filterin g: Tick this box to Enable the MAC filterin g feature. Deny all clients with MAC ad dresses listed below to access the network: When selected, the computers lis ted in the MAC Filter ing[...]

88 IP Filter You can choose whether to Deny or only Allow, co mputer with those IP Addresses from ac cessing certain Ports. This can be used to control which Internet applications t he computers can access. You may need to have certain knowledge of what Internet ports the applications use. IP Filter Enable IP filterin g: Tick this box to Enable the[...]

89 URL Filter You can deny access to certain websites by blocking keyw ords in the URL web address. For example, “abc123” has been added to the URL Block ing Table. Any web address that includes “abc123” will be blocked.[...]

90 8.2.5 Advanced The Internet section allows you to configure the Advanced settings of the router. Network Address Translation (NAT) This page allows you to Enable / Disable the Network Address Translation (NAT) feature. The NAT is required to share one Internet account with multiple LAN users. It also is required for certain Firewall features to [...]

91 Port Mapping Port Mapping allows you to redirect a particular range of ports to a computer on your LAN network . This helps you host servers behind the NAT and Firewall. In the example below, there is a Mail Server that requires ports 22 to 23. When there is a connection from the Internet on those ports, it will be redirected to the Mail Server [...]

92 Port Forwarding Port Forwarding allows you to redirect a particular public port to a computer on your LAN network. This helps you host servers behind the NAT and Firewall. In the example below, there is a FTP Server running on port 21 on the LAN. For security reasons, the Administrator would like to provide this server to Internet connection on [...]

93 Port Trigger If you use Internet applications which use non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the Wireless Router's firewall. Port Trigger will be required for these applications to work. Port Trigger Enable Port For warding Tick this box to Enable the Port Tri[...]

94 Application L ayer Gateway (AL G) Certain applications may require the use of ALG feature to functio n correctly. If you use any of the applications listed, pleas e tick and select it to enable this feature.[...]

95 Universal Plug a nd Play (UPnP) The UPnP function allows automatic discovery and configuration of UPnP enabled devices on your network. It also provides automatic port forwarding for supported applications to seamlessly bypass the Firewall. Universal Plug and Play (UPn P) Enable the UPnP Fea ture: Tick this box to Enable the UPnP featur e to all[...]

96 Quality of Service (QoS) QoS allows you to control the priority that the data is transmitted over the Internet, or to reserve a specific amount of Internet bandwidth. This is to ensure that applications get enough Internet bandwidth for a pleasant user experience. If not, then the performance and user experience of time sensitive transmissions s[...]

97 Priority Queue Method Bandwidth priority is set to either High or Low. The transmissions in the High queue will be processed first. Unlimited Prior ity Queue Local IP Address: The computer with this I P Address will n ot be bound by the QoS rules. High / Low Prior ity Queue Protocol: The type of netw ork protocol. High / Low Prior ity Sets the p[...]

98 Bandwidth Allocation Method You can set the maximum amount of bandwidth a certain protocol will use at one time. Or you can set a minimum amount of bandwidth that will be guaranteed to a certain protocol. Bandwidth Allo cation Type: Set whether the Q oS rules apply to tran smission that are Download, Upl oad or Both dire ctions. Local IP range: [...]

99 Routing If your TRAVEL ROUTER device is connected a network with different subnets, then this feature will allow the different subnets to communicate with each other. Note: NA T function n eeds to be disabled for the Routin g featu re to be enabled. Static Routing Enable Static Rou ting: Tick this box to Enable the Static Router feature. Destina[...]

100 Destination Subnet Mask Gateway Hop Interface 192.168.1.0 255.255.255.0 192.168.123.216 1 LAN 192.168.0.0 255.255.255.0 192.168.123.103 1 LAN So if, for example, Client3 wants to send an IP dat a packet to 192.168.0. 2 (Client 2), it would use the above table to determi ne that it had to go via 192.168.123.103 (Router 2) And if it sends Packets[...]

101 8.2.6 Tools This section allows you to configure some device system settings. Admin This page allows you to change the system password and to con figure remote management. Change Password Old Password: Enter the curren t password. New Password: Enter your new pas sword. Repeat New Pass word: Enter your new pas sword again for verification. Remo[...]

102 Time This page allows you to set the system time. Time Time Setup: Select the method you want to se t the time. Time Zone: Select the time zon e for your current l ocation. NTP Time Server: Enter the address of the Network Ti me Protocol (NT P) Server to automatically s ynchronize with a s erver on the In ternet. Daylight Saving s: Check whethe[...]

103 Dynamic DNS (DDNS) This free service is very useful when combined with the Virtual Server feature. It allows Internet users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change whenever you connect, which make[...]

104 Power This page allows you to Enable or Disable the wire less LAN power saving features.[...]

105 Diagnosis This page allows you determine if the T RAVEL ROUTER device has an active Internet connection. Diagnosis Address to Pin g: Enter the IP address you like to see if a successful c onnection can be made. Ping Result: The results of the Ping test.[...]

106 Firmware The firmware (software) in the TRAVEL ROUTER device can be upgraded using your Web Browser. To perform the Firmware Upgrade: 1. Click the Browse button and navigate to the location of the upgrade file. 2. Select th e upgrade file. Its name will appear in the Upgrade File field. 3. Click the Apply button to commence the firmware upgrade[...]

107 Back- up Back- up Restore to factor y default: Restores the devic e to factory d efault settings. Backup Settin gs: Save the current c onfiguration settin gs to a file. Restore Settings: Restores a previousl y saved configurati on file. Click Browse to select the file. Then Up load to load th e settings.[...]

108 Reset In some circumstances it may be required to force the device to reboot.[...]

109 8.3 AP and Client Bridge Modes When the TRAVEL ROUTER device is set to AP or Client Bridge modes, it will no longer all ocate IP addresses to its wireless clients. To access the Web-Based configuration page, please follow the following steps to set a static IP address (Win dows XP/Vista). 1. Connect to the TRAVEL ROUTER using an Ethernet CAT.5 [...]

110 3. Windows XP, click [ Network Connection] Windows Vista, click [View Network Status and Tasks] then [Manage Network Connections] 4. Right click on [ Local Area Connection ] and choose [ Properties ].[...]

111 5. Check “Client for Microsoft Networks”, “File and Printe r Sharing”, and “Internet Protocol (TCP/IP) is ticked. If not, please install them. 6. Select “Internet Protocol (TCP/IP)” and click [ Properties ][...]

112 7. Manually set the IP Address. Then click [OK] For example: IP Address: 192.168.0.250 Subnet Mask: 255.255.255.0[...]

113 8. You should now be able to access the Web-Based configuration in your Web Browser. 9. Remember to configure the settings back to Obtain an IP Address Automatically and Obtain DNS Server Address Automatically once you complete configuring the Web-Based interface.[...]

114 8.4 Client Bridge Mode The Client Bridge mode turns the TRAVE L ROUTER into a wireless clien t, which then allows non -wireless devices to use its RJ45 port to access the network wirelessly. 8.4.1 Wireless This section allows you to configure which wireless network the TRAVEL ROUTER will connect to. Basic 1. Configure which wireless network the[...]

115 3. Select the SSID (wireless network) that you would like to connect to, and then click Add to AP Profile . 4. Enter the wireless security settings for this SSID. Then click Save to apply the settings. 5. Change your IP Address settings back to Obtain your IP Address Automatically . You should now be connected to the wireless netw ork through t[...]

116 AP Profiles You can save the settings up to three wireless networks. The TRAVE L ROUTER will automatically connect to the wireless network in order of priority. AP Profile Add: Manually Add a n ew SSID (wireless net work) profile. Edit: Edit the SSID setting s. Move Up / Down: Change the pri ority that the TRAVEL R OUTER will connect t o these [...]

117 Appendix A – FCC Inter ference Statement Fe deral Communication Commission In terf erence St ate ment This equipment has been te sted and fo und to comply w ith the limits fo r a Class B digi tal device, pursuant to Part 15 of the FCC Rules. T hese limits are d esigned to provide reasonable protection against harmful interference in a residen[...]

118 IMPORTANT NO TE: FCC Radiation Exp osure Statemen t: This equipment complies with FCC radiation exposure limits set fort h for an uncontrolled environment. This equipment should be installed and operated with mi nimum distance 20cm between the radiator & your body. We declare that the product is limited in CH1~CH11 by specifie d firmware co[...]

119 Appendix B – I C Interference Stateme nt Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accep t any interference received, including inte rference that may cause undesir[...]