Epson 737c инструкция обслуживания

Epson PowerLite 737c Projector 2/05 Epson PowerL ite 737c Project or - 1 Projector Parts Specifications General Type of display Poly-silicon TFT active matrix Resolution 1024 × 768 pixels (XGA) (native format) Color 24-bit, 16.8 m illion colors reproduction Brightness 2000 lumens (High Brightness mode) (ANSI) 1500 lumens (Low Brightness mode) Cont[...]

Epson PowerLite 737c Projector 2 - Epson PowerLite 73 7c Projector 2/05 Safety and Approvals United States FCC 47CFR Part15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Class B CSA C22.2 No. 60950 CE Marking Directive 73/23/EEC, 89/336/E EC IEC60950 Third Edition EN 55022, EN 55024 Compatible Video Formats The projector supports the video d[...]

Epson PowerLite 737c Projector 2/05 Epson PowerL ite 737c Project or - 3 Positioning the Projector Before connecting the projector, you need to decide where to place it. The location you choose depends on the size of the room and what you are projecting. ❏ Place the projector on a stur dy, level surface, between 3.2 and 39.7 feet from the screen.[...]

Epson PowerLite 737c Projector 4 - Epson PowerLite 73 7c Projector 2/05 3. Press the P Power button on top of the projector or on the remote control. The projector beeps once and the P Power light flashes green as the projector warms up , then an image begins to appear. When the P Power li ght stops flash ing and remains green, the projector is rea[...]

Epson PowerLite 737c Projector 2/05 Epson PowerL ite 737c Project or - 5 Selecting the Image Source If multiple devices are connected to the projector, the easiest way to select the image sou rce is to press the Search button on the remote control or the Source Search button on the projector until the correct image is projected. You can also press [...]

Epson PowerLite 737c Projector 6 - Epson PowerLite 73 7c Projector 2/05 Adjusting the Image Shape The projector automatically correc ts images that are distorted when the projector is tilted up or down (up to a 15° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn’t rectan[...]

Epson PowerLite 737c Projector 2/05 Epson PowerL ite 737c Project or - 7 Using Direct Power On The Direct Power On function enables faster setup. The projector will start up automatically when you plug it in ; you won’t have to press the P Power button. Follow these steps to enable Direct Power On: 1. Press the Menu button on the remote control a[...]

Epson PowerLite 737c Projector 8 - Epson PowerLite 73 7c Projector 2/05 4. While the image is enlarged, you can: ❏ Use the pointer button to move around the screen. ❏ Press the E-Zoom button to zoom out. 5. When you’re done, press the Esc button to return the im age to its original size. Using the Remote Control as a Wireless Mouse When you u[...]

Epson PowerLite 737c Projector 2/05 Epson PowerL ite 737c Project or - 9 Using Password Protection If you assign a password for the projector, a screen app ears requesting the password whenever you plug in and turn on th e projector. If you enter the pass word incorrectly three times in succession, the projector’s operat ion is locked. Disconnect[...]

Epson PowerLite 737c Projector 10 - Epson PowerLite 737c Projector 2/05 Starting the Projector with a Password Note: You must unplug the projector and then plug it back in to enable password protection. When the password fu nction is enabled, you see this screen when you plug in and t u rn on the projector: Hold down the Num button on the remote co[...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 11 Depending on whether your projector is set up to connect in ad hoc mode or access point mode (also called infrastructure mode), you see this screen: 3. If you’ve already configured the projector for your wireless network, go to “Projecting Wirelessly” on page 15. Otherwis[...]

Epson PowerLite 737c Projector 12 - Epson PowerLite 737c Projector 2/05 6. Select the appropriate settings for your mode: 7. When done making settings, highlight the OK button at the top of the screen. Then press Enter . Highlight the OK button again and press Enter to return to the main EasyMP Network Screen. Configuring the Networ k Settings for [...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 13 3. Click the Configure button. Then click the Advanced tab on the screen that appears. You see a screen like this: 4. Ad hoc mode: Highlight Network Typ e in the Property list and set the Value to 802.11 Ad Hoc . Access point mode: Highli ght Network Type and set the Value to I[...]

Epson PowerLite 737c Projector 14 - Epson PowerLite 737c Projector 2/05 12.Verify that you’ve enabled your computer’s connection to the access point. It should be listed as shown above, with the small icon next to it, indicating a connection. If it’s not listed, click Configure and then type the name of your access point. 13.When done, click [...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 15 Projecting Wirelessly Once you’ve started EasyMP an d set up your projector and computer in either ad hoc mo de or access point mode, follow these steps to start NS Conne ction and project wirelessly. Note: You must have installed EMP NS Connection from your projector CD-ROM.[...]

Epson PowerLite 737c Projector 16 - Epson PowerLite 737c Projector 2/05 4. Once the name of your projecto r appears, select it and click Connect . If more than one projector is listed, you can select up to four additional projecto rs and connect to them at the same time. If the selected projector is being used by another person, you can still conne[...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 17 3. Click Use IP connect mode , then click OK . You see this screen: 4. Click IP connection . You see this screen: 5. Enter the projector’s IP address and click Search . The IP address appears in the Projector list and a searching icon displays. If the search fa ils to find a [...]

Epson PowerLite 737c Projector 18 - Epson PowerLite 737c Projector 2/05 Managing Projecto rs from a Remote Computer The software included with your projector lets you monitor and control projector(s) from a remote computer. These features are intended for use by network administrators. ❏ Use EMP Monitor to see your projectors’ status, switch im[...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 19 You see this screen listing all registered projectors: No t e : To delete a projector fr om the list, highlight the projector name, and click Delete . 5. Click Close . You see the status of each of your registered projectors on the main EMP Monitor s creen: Monitoring Your Proj[...]

Epson PowerLite 737c Projector 20 - Epson PowerLite 737c Projector 2/05 Controlling Your Projectors The control buttons in the up per-right of the EMP Monitor screen let you turn the projecto rs on and off and select video signals. (Hold the mouse pointer over a button to see a description of its me aning.) Select the projector you want to operate [...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 21 Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. ❏ Use a canister of compressed air to remove dust. ❏ To remove dirt or smears on the lens, use lens-cleaning paper. If necessary, moisten a soft cloth with lens cleaner a nd gently wipe the le[...]

Epson PowerLite 737c Projector 22 - Epson PowerLite 737c Projector 2/05 3. If you need to replace the filter, slide it off as shown. 4. Slide the new air filter until it clicks in place. Replacing the Lamp The projection lamp typically lasts for about 2000 hours of use (in High Brightness mode) or 3000 hours (in Low Brightness mode). It is time to [...]

Epson PowerLite 737c Projector 2/05 Epson PowerLite 737c Projector - 23 8. Insert the two cover tabs , then press down on the cover until it snaps into place. 9. Reset the lamp timer as described in the next section. Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp message. Note: Do not r[...]