Epson D6155W инструкция обслуживания

PowerLite ® D6150/D6155W/D6250 User's Guide[...]

[...]

Contents Introduction to Your Projector ................................................................................................................... 9 Projector Features ................................................................................................................................ 9 Product Box Contents .....................[...]

Connecting to an External Computer Monitor ................................................................................ 36 Connecting to External Speakers .................................................................................................. 36 Connecting to External USB Devices ......................................................[...]

Turning Off the Projector .................................................................................................................... 67 Selecting the Language for the Projector Menus................................................................................ 68 Adjusting the Image Height ...............................................[...]

Password Security Types .............................................................................................................. 95 Setting a Password ................................................................................................................... 95 Selecting Password Security Types ........................................[...]

Replacing the Remote Control Batteries ..................................................................................... 138 Transporting the Projector ................................................................................................................ 140 Solving Problems ............................................................[...]

Supported Video Display Formats .................................................................................................... 162 Notices ..................................................................................................................................................... 164 Important Safety Information ......................[...]

Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information Projector Parts Locations Projector Features The PowerLite D6150, D6155W, and D6250 projectors include these special features: Bright, high-resolutio[...]

• Network message broadcast system to project timely messages to all networked projectors (Windows only) Product Box Contents Additional Components Optional Equipment and Replacement Parts Warranty and Registration Information Parent topic: Introduction to Your Projector Related concepts Projector Parts Locations Product Box Contents Save all the[...]

1 Projector 2 Remote control 3 Remote control batteries (two AA alkaline) 4 Power cord 5 VGA computer cable 6 Cable clips 7 Cable cover 8 Password Protected sticker 9 Projector documentation CD 10 Projector software CD 11[...]

Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional components: • To receive an S-Video signal, you need an S-Video cable compatible with your device. See your local computer or electronics dealer for purchase information. • To receive a component[...]

Option or part Part number AP-60 Projector Sound Solution V12H329020 Universal projector ceiling mount ELPMBPJF Adjustable suspended ceiling channel kit ELPMBP01 False ceiling plate kit ELPMBP02 Structural Round ceiling plate ELPMBP03 Adjustable Extension Column (pipe) 8" - 11" (20 to 28 cm) ELPMBC01 Kensington security lock ELPSL01 Accol[...]

Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your projector. • Tips contain additional projection information[...]

Parent topic: Introduction to Your Projector Projector Parts - Front/Top 1 Exhaust vent (with shutter) 2 Projector status lights 3 Remote receiver 4 Zoom/focus ring cover 5 Foot release lever 6 Front adjustable foot 7 Lens cover glass 8 Speaker 9 Air intake vent (air filter) 10 Optional wireless LAN module indicator light 11 Zoom ring 15[...]

12 Focus ring 13 Cable cover 14 Control panel 15 Lamp cover Parent topic: Projector Parts Locations Projector Parts - Rear 1 Optional wireless LAN module port and stopper 2 Cable cover screw holes 3 RS-232C port 4 Monitor Out port 5 Audio Out port 6 A/C input port 7 Cable clip holes 8 Security slot 9 Security lock port 10 Network ( LAN ) port 16[...]

11 USB TypeA port 12 USB TypeB port 13 Computer2 port 14 Audio2 port 15 Computer1 port 16 Audio1 port 17 L-Audio-R audio ports 18 S-Video port 19 Video port 20 HDMI port 21 Trigger out port Parent topic: Projector Parts Locations Projector Parts - Base 1 Mounting bracket holes 2 Alternate mounting bracket holes 17[...]

3 Front adjustable foot Parent topic: Projector Parts Locations Projector Parts - Control Panel 1 Power button 2 Source Search button (searches for connected sources) 3 Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons 4 Horizontal keystone adjustment buttons (adjust screen shape) and arrow buttons 5 Help button (accesses[...]

Projector Parts - Remote Control 1 Power button 2 Computer button (cycles through connected computer sources) 3 Video button (cycles through connected video sources) 19[...]

4 Split button (splits the screen) 5 Numeric buttons (enter numbers) 6 A/V Mute button (turns off picture and sound) 7 Freeze button (stops video action) 8 Auto button (automatically adjusts position, tracking, and sync settings) 9 Aspect button (selects the image aspect ratio) 10 Page Up / Down buttons (control presentation slides) 11 E-Zoom + / ?[...]

Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Attaching and Removing the Cable Clips Attaching and Removing the Cable Cover Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project [...]

Rear Ceiling 22[...]

Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system. Parent topic: Projector Placement Related references Projector Se[...]

Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) PowerLite D6150/D6250 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 30 inches (76 cm) [...]

Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 200 inches (508 cm) 223 to 363 inches –12.5 inches (–32 cm) (567 to 922 cm) 250 inches (635 cm) 280 to 454 inches –15.6 inches (–40 cm) (710 to 1154 cm) 300 inches (762 cm) 336 to 545 inches –18.8 inches (–48 cm) (853 to 1385 cm) 16:9 Aspect Ratio Imag[...]

Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 150 inches (381 cm) 182 to 296 inches 2 inches (5 cm) (463 to 753 cm) 200 inches (508 cm) 243 to 396 inches 2.7 inches (7 cm) (618 to 1005 cm) 250 inches (635 cm) 305 to 495 inches 3.4 inches (9 cm) (774 to 1257 cm) 275 inches (699 cm) 335 to 545 inches 3.7 inches[...]

Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 150 inches (381 cm) 177 to 288 inches –2 inches (–5 cm) (450 to 732 cm) 200 inches (508 cm) 237 to 385 inches –2.6 inches (–7 cm) (602 to 978 cm) 250 inches (635 cm) 296 to 482 inches –3.3 inches (–8 cm) (753 to 1223 cm) 280 inches (711 cm) 332 to 539 [...]

Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 100 inches (254 cm) 133 to 217 inches –1.5 inches (–4 cm) (339 to 552 cm) 120 inches (305 cm) 160 to 261 inches –1.8 inches (–5 cm) (407 to 663 cm) 150 inches (381 cm) 201 to 327 inches –2.3 inches (–6 cm) (510 to 830 cm) 200 inches (508 cm) 268 to 436[...]

Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 80 inches (203 cm) 97 to 157 inches 1.1 inch (3 cm) (245 to 400 cm) 100 inches (254 cm) 121 to 197 inches 1.4 inches (3 cm) (307 to 501 cm) 150 inches (381 cm) 182 to 296 inches 2 inches (5 cm) (463 to 753 cm) 200 inches (508 cm) 243 to 396 inches 2.7 inches (7 cm[...]

Connecting to Video Sources Connecting to an External Computer Monitor Connecting to External Speakers Connecting to External USB Devices Connecting to a Document Camera Parent topic: Setting Up the Projector Related references Projector Setup Settings - Extended Menu Product Box Contents Connecting to Computer Sources Follow the instructions in th[...]

1 Computer1 or Computer2 port 4. Tighten the screws on the VGA connectors. Parent topic: Connecting to Computer Sources Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable. 1. Make sure the projector and your computer are turned off. 2. Connect the HDM[...]

2. Connect the other end to any available USB port on your computer. 3. If necessary, configure your computer to work with an external USB mouse. See your computer documentation for details. Parent topic: Connecting to Computer Sources Related references Projector Parts - Remote Control Connecting to a Computer for Sound If your computer presentati[...]

Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. 1. Make sure the projector and your video source are turned off. 2. Connect the HDMI cable to your video source's HDMI output port. 3. Connect the other end to the projector's HDMI port. 1 HDMI port P[...]

1 Computer1 or Computer2 port If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references Input Signal Settings - Signal Menu Connecting to a Composite Video Source If your video source has a composite video port, you can con[...]

3. Connect the other end to the projector's S-Video port. 1 S-Video port Parent topic: Connecting to Video Sources Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. If you are projecting video using a Computer port, connect the projector to the vid[...]

2 L-Audio-R ports Parent topic: Connecting to Video Sources Connecting to an External Computer Monitor If you connected the projector to a computer using a Computer port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible. Note: Monitors[...]

3. Connect one end of the cable to your external speakers as necessary. 4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port. 1 Audio Out port Parent topic: Projector Connections Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector. USB Devi[...]

Parent topic: Connecting to External USB Devices Related topics Projecting a Slide Show Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector's USB Type A port and use it to project a slide show or presentation. 1. If your USB device came with a power adapter, plug the device into an elec[...]

Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector. 1. Exit from any software running your slide show or presentation from the device. 2. If the device has a power button, be sure to turn off and unplug the device. 3. [...]

Attaching and Removing the Cable Clips You can install the cable clips that came with your projector to provide additional support to the power and HDMI cables. 1. Plug in the power and HDMI cables. 2. Insert each guide into the cable clip holes near the power inlet and HDMI port. 3. Attach the cable clips to the power and HDMI cables. Be sure to l[...]

2. Place the cable cover on the projector as shown, guiding the cables through the notch on the base of the cable cover. 3. Tighten both cable cover screws. To remove the cover, loosen both screws and take the cover off of the projector. Parent topic: Setting Up the Projector 41[...]

Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. 1. Open the battery cover as shown. 2. Insert the batteries with the + and – ends facing as shown. 42[...]

3. Close the battery cover and press it down until it clicks into place. Parent topic: Setting Up the Projector 43[...]

Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Projection Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Controlling a Networked Projector Using a Web Browser Crestron RoomView Support Wired Network Proje[...]

2. Connect the other end of the cable to the projector's LAN port. 1 LAN port Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from multiple computers on your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector t[...]

4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • PJLink Password lets you enter a password up to 32 alphanumeric characters lon[...]

7. Select the Wired LAN menu and press Enter . 8. If necessary, select IP Settings and press Enter . 9. Select your IP Settings as necessary: • If your network assigns addresses automatically, turn on the DHCP setting. • If you must set addresses manually, turn off DHCP and enter the projector's IP Address , Subnet Mask , and Gateway Addre[...]

There are two ways to connect the projector to your wireless network: • Using the optional Epson Quick Wireless Connection USB key (Windows only) • Configuring the connection manually using the projector's Network menus After installing the module and setting up the projector, install the network software from the Epson Projector Software [...]

2. Remove the screw securing the wireless LAN module stopper, then remove the stopper. 3. Insert the wireless LAN module into the port. 49[...]

4. Replace the wireless LAN module stopper and secure it using the screw you removed. 5. Plug in and turn on the projector. Parent topic: Wireless Network Projection Related references Optional Equipment and Replacement Parts Using Quick Wireless Connection (Windows Only) You can use the optional Epson Quick Wireless Connection USB key to quickly c[...]

After a few minutes, your computer image is displayed by the projector. If it does not appear, press the LAN button on your projector remote control or restart your computer. 5. Run your presentation as necessary. 6. When you finish projecting wirelessly, remove the USB key from your computer. Note: You may need to restart your computer to reactiva[...]

5. Select the Basic menu and press Enter . 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector cont[...]

7. Select the Wireless LAN menu and press Enter . 8. Select the settings on the Wireless LAN menu as necessary for your network. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. After you complete the wireless settings for your projector, you need to select the wi[...]

Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick : lets you quickly connect to one computer or use the optional Epson Quick Wireless Connection USB key to connect Advanced : lets you connect to multiple computers via a wireless network access point Channel 1ch In Quick connection mode, select[...]

Setting Options Description IP Address Display On Selects whether to display the IP address on the network standby Off screen Parent topic: Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access your wireless u[...]

Note: Check with your network administrator for guidance on entering the correct information. 1. Press the Menu button on the remote control. 2. Select the Network menu and press Enter . 3. Select Network Configuration and press Enter . 4. Select the Security menu and press Enter . 5. Select the security settings as necessary to match your network [...]

Setting Options Description WEP Encryption 128Bit For WEP security, selects the type of encryption coding 64Bit Format ASCII For WEP security, selects the encryption input method: HEX ASCII : enables text input HEX : enables hexadecimal input Key ID 1 to 4 For WEP security, selects the WEP encryption key ID Encryption Key 1 to Various characters de[...]

2. Select the Network menu and press Enter . 3. Select Network Configuration and press Enter . 4. Select the Mail menu and press Enter . 5. Turn on Mail Notification . 6. Enter the IP address for the SMTP Server option. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 7. Select a [...]

Network Projector E-mail Alert Messages Parent topic: Using the Projector on a Network Network Projector E-mail Alert Messages When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mail containing the following information: • EPSON Projector on the subject line • The name of the projector [...]

4. Select the Others menu and press Enter . 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 6. If your network environment uses an AMX controller, turn on the AMX Device Discover[...]

Note: If you set Standby Mode to Communication On , you can use a Web browser to select settings and control projection even if the projector is in standby mode. You cannot select all of the projector menu settings or control all projector functions using a web browser. 1. Make sure the projector is turned on. 2. Start your web browser on a compute[...]

6 Page Up and Page Down button controls 7 Searches for sources 8 Selects the network source 9 Selects the USB device source 10 Volume button controls 6. Select the icon corresponding to the projector function you want to control. Parent topic: Using the Projector on a Network Crestron RoomView Support If you are using the Crestron RoomView network [...]

4. Select the Others menu and press Enter . 5. Set the RoomView setting to On to allow the projector to be detected. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. 7. Turn off the projector, then turn it on again to enable the RoomView setting. Parent topic: Cre[...]

3. Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box. 4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote control buttons. You can scroll through button options at the bottom of the scree[...]

Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image With the Zoom Ring Focusing the Image Using the Focus Ring Remote Control Op[...]

1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's power light turns orange. This indicates that the projector is receiving power, but is not yet turned on. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3. Press the power but[...]

If you do not see a projected image right away, try the following: • Turn on the connected computer or video device. • Insert a DVD or other video media, and press the Play button (if necessary). • Press the Source Search button on the projector or remote control to detect the video source. Parent topic: Using Basic Projector Features Related[...]

3. To transport or store the projector, make sure the power light is orange (but not flashing), then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange. Parent topic: Using Basic Projector Features Selecting the Language for the Projector Menus If you[...]

3. Press the down arrow button to select the Extended menu and press Enter . Note: The Network menu does not appear on non-network projector models. 4. Press the down arrow button to select the Language setting and press Enter . 5. Select the language you want to use and press Enter . 6. Press Menu or Esc to exit the menus. Parent topic: Using Basi[...]

2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Related referenc[...]

1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. Press the Menu button. 3. Select the Settings menu and press Enter . 4. Select the Keystone setting and press Enter . 5. Select the Quick Corner setting and press Enter . You see the Quick Corner adjustm[...]

6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter . 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc . Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Correcting Image Sha[...]

2. Press a keystone button on the projector's control panel. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape using the Keystone settings in the projector menus. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu 73[...]

Resizing the Image With the Zoom Ring 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2. To enlarge or reduce the image size, rotate the projector's zoom ring. Parent topic: Using Basic Projector Features Focusing the Image Using the Focus Ring 1. T[...]

Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the angles listed here. 1 19.7 feet (6 m) 2 60º 3 30º 4 1[...]

Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries. Using the Remote Control as a Wireless Mouse Using the Remote Control as a Presentation Pointer Parent topic: Using Basic[...]

• To drag-and-drop, hold the Enter button as you move the cursor with the arrow buttons, then release Enter at the destination. Parent topic: Remote Control Operation Using the Remote Control as a Presentation Pointer You can use the projector's remote control as a pointer to help you call out important information during a presentation. The[...]

Related references Projector Feature Settings - Settings Menu Selecting an Image Source If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other. 1. Make sure the connected image source you want to use is turned on. 2. For video image sources, insert a DVD[...]

1 Computer port sources 2 Video and HDMI sources 3 USB port sources (external devices) 4 Network source 4. If you see a blank screen or a "No Signal" message, try the following: • Check that the device cables are securely connected to the projector and the device. • Make sure the projector is turned on. • For laptop computers, make [...]

Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom. 1. Turn on the projector and display an image. 2. Hold down the A/V Mute button on the remote control for five seconds. The image disappears briefly and reappears flipped top-to-bottom. 3. To change projection back to the o[...]

3. Select the Extended menu and press Enter . 4. Select the Projection setting and press Enter . 5. Select a projection mode and press Enter . 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal [...]

Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. The shape and size of the displayed image changes, and the name of the aspect ratio appears briefly on the screen. 3. To cycle[...]

Aspect ratio setting Description Normal Displays images using the full projection area and maintains the aspect ratio of the image. 4:3 Displays images using the full projection area at 4:3 aspect ratio. 16:9 Converts the aspect ratio of the image to 16:9. PowerLite D6155W Aspect ratio setting Description Auto Automatically sets the aspect ratio ac[...]

Parent topic: Using Basic Projector Features Related references Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from[...]

Color Mode Description Dynamic Best for projecting in a bright room Theatre Best for movies projected in a dark room Sports Best for television images in a bright room sRGB Best for standard sRGB computer displays Blackboard Best for presentations onto a green chalkboard (adjusts the colors accordingly) Whiteboard Best for presentations onto a whit[...]

3. Select the Image menu and press Enter . 4. Select the Auto Iris setting and select On . 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode Controlling the Volume With the Volume Buttons You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the [...]

Projecting a Slide Show You can use your projector's Slideshow feature whenever you connect a USB device that contains compatible image files. This lets you quickly and easily display a slide show or presentation, and control it using the projector's remote control. Slideshow Presentations Supported Slideshow File Types Starting a Slide S[...]

File contents File type Details (extension) Image .jpg Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution .bmp Make sure the file resolution is not above 1280 × 800 .gif Make sure the file is not: • Above 1280 × 800 resolution • Animated .png Make sure the file resolution [...]

2. Do the following as necessary to locate your files: • If you need to display files in a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter . • To view additional images in a folder, highlight Next page o[...]

Slideshow Display Options You can select these display options when using the projector's Slideshow feature. Option Available settings Description Display order Name order Displays files in name order Date order Displays files in date order Sort Order In Ascending Sorts files in first-to-last order In Descending Sorts files in last-to-first or[...]

Parent topic: Starting a Slide Show or Presentation 91[...]

Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Projector Identification System for Multiple Projector Control Projecting Two Images Simu[...]

Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it. 1. Press the Freeze button on the remote control to stop the video action. 2. To re[...]

1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into. • Press the E-Zoom + button repeatedly to zoom int[...]

Installing a Security Cable Parent topic: Adjusting Projector Features Password Security Types You can set up these types of password security using one shared password: • Power On Protect password prevents anyone from using the projector without first entering a password. • User's Logo Protect password prevents anyone from changing the cu[...]

You see the prompt "Change the password?". 3. Select Yes and press Enter . 4. Hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt. 5. Enter the password again. You see the message "Password accepted[...]

If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears. 1. To prevent unauthorized use of the projector, select Power On Protect , press Enter , select On , press Enter again, and press Esc . 2. To prevent changes to the User's Logo screen or related display settings, select User&[...]

You must enter the correct password to use the projector. 1. Hold down the Num button on the remote control while you enter the password using the numeric buttons. The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again. Enter the correct passw[...]

• If the password is incorrect 30 times in a row, the projector remains locked. You must contact Epson for service and provide the request code displayed with the locking message. Parent topic: Password Security Types Saving a User's Logo Image to Display You can transfer an image to the projector and then display it whenever the projector t[...]

6. Select Yes and press Enter . (If you want to change the selected area, select No , press Enter , and repeat the last step.) You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter . You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter . Note: It takes a fe[...]

Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You can lock all the buttons or all the buttons except the power button. 1. Press the Menu button. 2. Select the Settings menu and press Enter . 3. Select the Control Panel Lock setting and press Enter . 4.[...]

Installing a Security Cable You can install two types of security cables on the projector to deter theft. • Use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture [...]

Setting the Remote Control ID Matching Multiple-Projector Display Quality Parent topic: Adjusting Projector Features Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID. 1. Press the Menu button. 2. Select the Extended menu and press Enter . 3. Select Projector ID and press Ente[...]

3. Aim the remote control at that projector. 4. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. Then release the buttons. 5. Press the ID button on the remote control to check if the ID-setting process worked. You see a message displayed by the projector. • If the remote contr[...]

5. Press the Menu button, select the Extended menu, and press Enter . 6. Select the Multi-screen setting and press Enter . 7. Set the Adjustment Level setting to 1 and press Enter . 8. Set the remote control ID to match the second projector. 9. Access the Extended menu Multi-screen setting on the second projector and set the Adjustment Level settin[...]

Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images from different image sources next to each other. You can control the split screen feature using the remote control or the projector menus. Note: While you use the split screen feature, other projector features may not be available and some[...]

5. To change the image sizes, select the Screen Size setting, press Enter , select a sizing option, press Enter , and press Menu to exit. Note: Depending on the video input signals, the images may not appear at the same size even if you choose the Equal setting. 6. To choose the audio you want to hear, select the Audio Source setting, press Enter ,[...]

Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Note: The Network menu does not appear on non-network projector models. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Setting[...]

You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter . 4. Press the up or down arr[...]

8. Press Menu or Esc to exit the menus. Parent topic: Adjusting the Menu Settings Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sur[...]

Setting Options Description Sharpness Varying levels available Adjusts the sharpness or softness of image details Abs. Color Temp (absolute color 5000 to 10000 ºK (Kelvin) Sets the color tone based on temperature) color temperature Color Adjustment Slider bars for each color Adjusts the intensity of individual hues in the image Auto Iris On Adjust[...]

Note: You can restore the default settings of the Position , Tracking , and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Auto Setup On Automatically optimizes computer image quality (when Off On) Resoluti[...]

Setting Options Description Position Up, down, left, right Adjusts the image location on the screen Progressive Off Sets whether to convert interlaced-to-progressive signals Video for certain video image types Film/Auto Off : for fast-moving video images Video : for most video images Film/Auto : for movies, computer graphics, and animation Noise Re[...]

Setting Options Description Aspect See the list of available aspect Sets the aspect ratio (width-to- ratios height ratio) for the selected input source Overscan Auto Changes the projected image ratio to make the edges visible by Off a selectable percentage or 4% automatically 8% Parent topic: Adjusting the Menu Settings Related references Available[...]

Setting Options Description Keystone H/V Keystone Adjusts image shape to rectangular (horizontally and Quick Corner vertically) H/V Keystone : lets you manually correct horizontal and vertical sides Quick Corner : select to correct image shape and alignment using an on-screen display Split Screen On Divides the viewing area horizontally and display[...]

Setting Options Description Remote Receiver Front Limits reception of remote control signals by the selected receiver; Rear Off turns off all receivers Front/Rear Off User Button Power Consumption Assigns a menu option to the User button on the remote Info control for one-touch access Progressive Closed Caption Test Pattern Multi-screen Resolution [...]

Setting Options Description Display Messages Selects various display options Display Background Messages : controls whether messages are displayed on the Startup Screen screen A/V Mute Display Background : selects the screen color or logo to display when no signal is received Startup Screen : controls whether a special screen appears when the proje[...]

Setting Options Description User's Logo – Creates a screen that the projector displays to identify itself and enhance security Projection Front Selects the way the projector faces the screen so the image is Front/Ceiling oriented correctly Rear Rear Ceiling Operation Direct Power On Selects various operation options Sleep Mode Direct Power O[...]

Setting Options Description Air Filter Setting Clean Notice Selects whether a reminder to change the air filter appears Clean Notice Timing Clean Notice : set to on to display a message when it is time to clean the air filter Clean Notice Timing : sets length of the interval between cleaning notices Projector ID Off Assigns an ID for the projector [...]

Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Net. Info - Wired LAN Projector Name Displays wired network status and details DHCP IP Address Subnet Mask Gateway Address MAC Address[...]

Setting Options Description Network Configuration Accesses additional network Configures your network settings menus Parent topic: Adjusting the Menu Settings Related concepts Wired Network Projection Wireless Network Projection Projector Information Display - Info Menu You can display information about the projector and input sources by viewing th[...]

Information item Description Source Displays the name of the port to which the current input source is connected Input Signal Displays the input signal setting of the current input source Resolution Displays the resolution of the current input source Video Signal Displays the video signal format of the current input source Refresh Rate Displays the[...]

Event ID code Cause and solution 0434 Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. 0482 0484 0485 0433 Cannot display the transferred images. Restart the EasyMP Network Projection program. 0481 Communication with computer was disconnected. Restart the EasyMP Net[...]

You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option. You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Network menu items • Lamp Hours • Password • User Button • Multi-screen Parent topic: Adjusti[...]

Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the a[...]

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens cover glass. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Parent topic: Projector Maintenance Cleaning the Projector Case Before cleaning the projector case, tu[...]

1 Projector on 2 Projector off Cleaning the Air Filter Replacing the Air Filter Parent topic: Projector Maintenance Cleaning the Air Filter Be sure to clean the projector's air filter if it gets dusty, if you see a message telling you to clean it, or if the Filter light flashes green. 1. Turn off the projector and unplug the power cord. 127[...]

2. Press down on the tabs on the air filter cover and open the cover. 3. Pull the air filter out of the projector. 128[...]

4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. 5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining [...]

Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 6. Place the air filter back in the projector as shown. 7. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related references Projector Light Status Replacing the Air Filter You need to replace the air filter in the following situati[...]

2. Press down on the tabs on the air filter cover and open the cover. 3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 131[...]

4. Place the new air filter in the projector as shown. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related references Projector Light Status Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp[...]

Projector Lamp Specifications Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary. 1. Turn off the projector and unplug the power cord. 2. Allow the[...]

4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 134[...]

6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Pres[...]

8. Push in the lamp firmly and tighten the screws to secure it. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance 136[...]

Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage information. 1. Turn on the projec[...]

Replacing the Remote Control Batteries The remote control uses the two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Open the battery cover as shown. 2. Remove the old b[...]

3. Insert the batteries with the + and – ends facing as shown. 4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallow[...]

Transporting the Projector The projector contains precision parts, some of which are glass. Follow these guidelines to transport or ship the projector safely: • Remove any equipment connected to the projector. • When transporting the projector a long distance or as checked luggage, pack it in a firm box with cushioning around it and mark the bo[...]

Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Solutions When Network Alert E-Mails are Not Received Where to Get Help Projectio[...]

1 Power light 2 Lamp light 3 Temperature light 4 Filter light Power light Lamp Temperature Filter light Status and solution light light Green Off Off Off Normal operation. Flashing green Off Off Off Warming up. Wait for an image to appear. Orange Off Off Off Standby or sleep mode. Flashing orange Off Off Off Preparing network monitoring or shutting[...]

Power light Lamp Temperature Filter light Status and solution light light Flashing red Off Flashing Off Projector is too hot. orange • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Make sure the environmental temperature is not too hot. • If overheating continues, replace the air filter. [...]

Power light Lamp Temperature Filter light Status and solution light light On Off Off Flashing It is time to clean the air filter. green On Off Off Flashing Low air flow through the projector. orange • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • If low air flow continues, replace the air f[...]

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related references Projector Setup Settings - Extended Menu Where to Get Help Related tasks Replacing the Lamp Cleaning the Air Filter Replacing the Air Filter Using the Projector Help Di[...]

Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect Solutions When No Image Appears on an External Monitor Solutions When There is No Sound or Low Volume Parent topic: Solving Problems Solutions When No Image Appears If no image appears, try the fo[...]

Related tasks Unlocking the Projector's Buttons Solutions When "No Signal " Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search button and wait a few seconds for an image to appear. • Turn on the connected computer or video source, and press Play to begin your prese[...]

3. Do one of the following: • Mac OS X 10.6.x : Click Show displays in menu bar . • Other Mac OS X versions : Select the VGA Display or Color LCD option, click the Arrange or Arrangement tab, and check the Mirror Displays checkbox. (See your laptop manual for details.) Parent topic: Solutions When "No Signal" Message Appears Solutions[...]

Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible. • If you adjusted the projector height using the projector feet, press the keystone buttons on the projector to adjust th[...]

Related references Input Signal Settings - Signal Menu Supported Video Display Formats Related tasks Displaying From a PC Laptop Displaying From a Mac Laptop Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Check the projector lens cover glass for con[...]

Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment. • Adjust the available settings on the Image menu for the current input[...]

Solutions When There is No Sound or Low Volume If there is no sound when you expect it or the volume is too low, try the following solutions: • Press a Volume button on the remote control to adjust the volume. • Press the A/V Mute button to resume video and audio if they were temporarily stopped. • Press the Source Search button to switch to [...]

• If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receivers setting is turned on in the projector's menus. Parent topic: Solving Projector or Remote Control Operation Problems Related references Projector Light Status Projector Feature Settings - Settings Menu Related tas[...]

Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the [...]

Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it's free. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your [...]

Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supporte[...]

PowerLite D6155W : Normal Power Consumption mode: White light output 3500 lumens (ISO 21118 standard) Color light output 3500 lumens ECO Power Consumption mode: White light output 2800 lumens (ISO 21118 standard) PowerLite D6250 : Normal Power Consumption mode: White light output 4000 lumens (ISO 21118 standard) Color light output 4000 lumens ECO P[...]

Zoom adjustment Manual Zoom ratio 1:1.6 (Tele-to-Wide) Internal sound system 5 W monaural Noise level 39 dB (Normal Power Consumption mode) 33 dB (ECO Power Consumption mode) Keystone correction angle Vertical: ± 30º Horizontal: ± 30º USB Type B port compatibility USB 1.1 and 2.0 compliant for using remote control as wireless mouse USB Type A p[...]

Lamp life PowerLite D6150 : Normal Power Consumption mode: Up to about 4000 hours ECO Power Consumption mode: Up to about 6000 hours PowerLite D6155W/D6250 : Normal Power Consumption mode: Up to about 3000 hours ECO Power Consumption mode: Up to about 4000 hours Note: Turn off this product when not in use to prolong the life of the projector. Lamp [...]

Weight PowerLite D6150 : 9.3 lb (4.2 kg) PowerLite D6155W/D6250 : 9.7 lb (4.4 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 110 to 240 VAC ±10% PowerLite D6150 : 3.0 to 1.5 A PowerLite D6155W/D6250 : 3.6 to 1.8 A Power consumption Operating: (110 to 120 V) PowerLite D6150 : Nor[...]

Power consumption Operating: (220 to 240 V) PowerLite D6150 : Normal Power Consumption mode: 316 W ECO Power Consumption mode: 235 W PowerLite D6155W/D6250 : Normal Power Consumption mode: 380 W ECO Power Consumption mode: 311 W Standby (all models): 0.38 W (Communication Off), 6.5 W (Communication On) Parent topic: Technical Specifications Project[...]

Supported Video Display Formats For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically. Your computer's mo[...]

Display format Refresh rate (in Hz) Resolution (in pixels) TV (NTSC) 60 720 × 480 TV (PAL) 50/60 720 × 576 TV (SECAM) 50 720 × 576 Component video SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 576 SDTV (480p) 60 720 × 480 SDTV (576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDMI input signals VGA 60 640 × 4[...]

Notices Check these sections for important notices about your projector. Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Software Copyright Copyright Notice Important Safety Information Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never [...]

• If the projector is mounted on a ceiling, it should be installed by qualified technicians using mounting hardware designed for use with this projector. • When installing or adjusting a ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants. This may cause the projector case to crack and the [...]

• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. • Never open any covers on the projector except as specifically explained in this manual. Never attempt to disassemble [...]

• Do not block the lens during projection using a book or any other object. This could damage the projector or cause a fire. • Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or pull it excessively. Keep the power cord away from hot electrical appliances. • If the lamp breaks, ventilate the ro[...]

WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with[...]

Software Copyright GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive[...]

Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation&[...]

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is t[...]

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable [...]

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are no[...]

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two g[...]

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free [...]

These LGPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. The list of LGPL Programs is as follows and the names of author are described in the source code of the LGPL Programs. LGPL Programs glibc-2.10 SDL-1.2.13 SDL-I[...]

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fe[...]

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non- free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although t[...]

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, prov[...]

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library[...]

during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes wer[...]

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, m[...]

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries [...]

END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of[...]

The "BSD License" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of BSD License programs busybox-1.13.4 License terms of conditions of each program which are provided by owner of the copyright to the "BSD License" are as follows. Copyright ©) The Regents[...]

License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg" are as follows. Copyright ©) 1994-1997, Thomas G. Lane . This file is part of the Independent JPEG Group's software. For conditions of distribution and use, see the accompanying README file. This distribution contains the sixth [...]

Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software". We specifically permit and encourage the use of this software as the basis of commerci[...]

License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows. For conditions of distribution and use, see copyright notice in png.h Copyright ©) 1998-2004 Glenn Randers-Pehrson (Version 0.96 Copyright ©) 1996, 1997 Andreas Dilger) (Version 0.88 Copyright ©) 1995, 1996 Guy Eric [...]

John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright ©) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Ma[...]

Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers -Pehrson glennrp@users.sourceforge.net September 1[...]

madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sour[...]

The code is derived from the text of the RFC, including the test suite (section A.5) but excluding the rest of Appendix A. It does not include any code or documentation that is identified in the RFC as being copyrighted. The original and principal author of md5.h is L. Peter Deutsch <ghost@aladdin.com>. Other authors are noted in the change h[...]

otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including [...]

(including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution. You may reproduce an[...]

WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your ex[...]

Parent topic: Notices Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is desig[...]